Butterfly Valves (BFV)

Butterfly Valves (BFV) O904-02/12 - Subject to change. Belimo Aircontrols (USA), Inc. Application A comprehensive line of Butterfl y Valves is available in sizes ranging from 2 to 30 in both standard and high performance. Victaulic valves are available to 12. All Butterfl y Valves fulfi ll the commercial and industrial HVAC application requirement for positive shut-off for liquids. Applications Include: Chillers Isolation Cooling Tower Isolation Change-Over Systems Large Air Handlers Coil Controls Bypass and Related Process Control Standard, grooved and high performance Butterfl y Valves meet a wide range of commercial and industrial HVAC applications Advanced seat and disc designs provide bubble tight shut-off capability at each valves specified temperature and pressure while maintaining a low seating torque Belimo offers NEMA 2, NEMA 4 and NEMA 4X actuators to ensure control in a variety of environments. Standard HD/HDU series valves incorporate a fi ve bushing design to isolate the valve shaft from the body for better control Stainless steel or nickel plated discs are standard for superior strength and durability ensuring a long lasting operation Grooved valves are AWWA rated for potable water in the United States. Check local laws for Canada 1

Nomenclature Butterfly Valves (BFV) F6 HD SY2 24 -MFT Valve F6 = 2-way F7 = 3-way Valve Size = 2 65 = 2 1/2 80 = 3 100 = 4 125 = 5 1 = 6 200 = 8 2 = 10 300 = 12 3 = 14 400 = 16 4 = 18 0 = 20 600 = 24 7 = 30 ORDERING EXAMPLE Trim Material HDU = Stainless Disc, Cast Ductile Iron Full Lug Body, EPDM Liner, Bubble Tight Close-Off to psi HD = Stainless Disc, Cast Ductile Iron Full Lug Body, EPDM Liner, Bubble Tight Close-Off to 200 psi (2 to 12 ), 1 psi (14 +) -1SHP = ANSI Class 1, Stainless Disc, Cast Steel Full Lug Body, RPTFE Seat, Bubble Tight Close-off up to 285 psi -300SHP = ANSI Class 300, Stainless Disc, Cast Steel Full Lug Body, RPTFE Seat, Bubble Tight Close-off up to 600 psi -VIC = Grooved AWWA (C606) Nickel Coated Iron Disc, Cast Ductile Iron ASTM A536, Grooved Fitting, EPDM Seat, Bubble Tight Close-Off to 200 psi Actuator Type Non-Spring Return ARB(X)... GRB(X)... DR... N4 GR/GM... N4 GMB(X) SY Fail- Safe GK... DKR...N4 Spring Return AF Power Supply -24 = 24 VAC/DC -110 = 110/120 VAC -120 = 120 VAC -230 = 230 VAC UP = 24-240 VAC Control Blank = On/Off -3-X1 = On/Off, Floating Point MFT or MFT-X1 = Multi-Function Technology -S = Built-in Auxiliary Switch -X1=Water Confi guration Non-Spring Return Spring Return 2 Pos. Modulating 1 Choose the valve actuator combination. NC NO NO/FO NC/FC NO/FO NO/FC NC/FO NC/FC 2 2-way Preference F6HD+SY2-24MFT Set Up Required Field Logic Determines Normal Position (Normally Closed) 1 VDC/2VDC/4mA = Closed (Normally Open) 1VDC/2VDC/4mA = Open Specify preference or confi guration. (Normally Open/Fail Open) Field Logic Determines Normal Position Spring Fails Valve (Normally Closed/Fail Closed) Field Logic Determines Normal Position Spring Fails Valve (Normally Open/Fail Open) 1VDC/2VDC/4mA = Open Spring Fails Valve (Normally Open/Fail Closed) 1VDC/2VDC/4mA = Open Spring Fails Valve (Normally Closed/Fail Open) 1VDC/2VDC/4mA = Closed Spring Fails Valve (Normally Closed/Fail Closed) 1VDC/2VDC/4mA = Closed Spring Fails Valve Non-Spring Return Spring Return Set-Up 2 Pos. Modulating Modulating 2 Pos. 3 +NO Specify Flow Pattern [10-35] Specify Flow Pattern [10-35] For MFT orders only - select programming code (consult factory) No Set Up Required Field Logic Determines Normal Position Master (Actuated) Valve NC (Normally Closed) 1 VDC/2 VDC/4mA = Closed Master (Actuated) Valve NO (Normally Open) 1 VDC/2VDC/4mA = Open +Tagging (if needed) 3-way Configuration NO/FO (Normally Open/Fail Open) Field Logic Determines Normal Position Spring Fails Master Valve NC/FC (Normally Closed/Fail Closed) Field Logic Determines Normal Position Spring Fails Master Valve NO/FO (Normally Open/Fail Open) 1 VDC/2VDC/4mA = Master Valve Open Spring Fails Master Valve NO/FC (Normally Open/Fail Closed) 1 VDC/2VDC/4mA = Maser Valve Open Spring Fails Master Valve NC/FO (Normally Closed/Fail Open) 1 VDC/2VDC/4mA = Master Valve Closed Spring Fails Master Valve NC/FC (Normally Closed/Fail Closed) 1 VDC/2VDC/4mA = Master Valve Closed Spring Fails Master Valve 4 Does order require tagging? Tagging: Valves may be tagged per customer specifi cation. ($10.00 per tag) Example: Chiller 1 3rd Floor East Part number for tagging: 99981-00101 5 Complete Ordering Example: F6HD+SY2-24MFT+NO +ACE Consult factory O904-02/12 - Subject to change. Belimo Aircontrols (USA), Inc. 2

Features / Benefits Standard Performance Butterfly Valves Belimo resilient seat HD(U)... Series Butterfly Valves are designed for use in ANSI Class 1 piping systems and are supplied in standard lug style body designs. VALVE DESIGN FEATURES Unique seat and disc design ensures positive valve sealing while maintaining low seating torque Butterfly valve discs are precision machined to half ball profile, providing a precise disc-to-seat relationship Cartridge style seat incorporates an elastomer bonded to a phenolic stabilizing ring, eliminating elastomer movement and reducing seat tearing or fatiguing due to bunching Cartridge seat has a much smaller mass of elastomer than traditional boot seat designs, limiting seat swell and the accompanying variations in seating torque The five bushing design completely isolates the valve shaft from the body, resulting in increased control of the valve disc, lower valve seating torque, and longer valve life Ductile Iron Full Lug Bodies EPDM liner Stainless Steel Disc Two Models to suit the application: HDU Series provides economical HVAC solutions up to psi close-off with a 200 psi body rating (2-12 ) HD Series provides full-rated close-off to 200 psi (2 12 ) or 1 psi (14 30 ) 2-way and 3-way applications ISO5211 DESIGN DUCTILE IRON BODY O904-02/12 - Subject to change. Belimo Aircontrols (USA), Inc. ID TAG RPTFE TOP BUSHING EPDM O-RING RPTFE BUSHINGS ANSI BOLT PATTERN PIN 304SS DISC 416SS SHAFT RPTFE LOWER BUSHING 3

HD(U) Series Butterfly Valves Standard Actuation (Average Assembly Weights) UNDERCUT MODELS 2-WAY 3-WAY ACTUATOR NON-SPRING RETURN SPRING RETURN ELECTRONIC FAIL-SAFE Size Valve Max GPM COP AMB(X) GMB(X) 2*GMB(X) AF... 2*AF... GK... 2*GK... 2 F6HDU 118 13 lbs. 14 lbs. 2.5 F665HDU 184 13 lbs. 14 lbs. 3 F680HDU 264 13 lbs. 25 lbs. 4 F6100HDU 470 24 lbs. 34 lbs. 25 lbs. 5 F6125HDU 734 29 lbs. 39 lbs. 30 lbs. 6 F61HDU 1058 43 lbs. 45 lbs. 2 F7HDU 118 44 lbs. 46 lbs. 2.5 F765HDU 184 56 lbs. 65 lbs. 3 F780HDU 264 62 lbs. 72 lbs. 63 lbs. 4 F7100HDU 470 122 lbs. 124 lbs. 5 F7125HDU 734 152 lbs. 154 lbs. 6 F71HDU 1058 186 lbs. 188 lbs. FULL RATED MODELS 2-WAY 3-WAY NON-SPRING RETURN SPRING RETURN ELECTRONIC FAIL-SAFE Size Valve Max GPM COP AMB(X) GMB(X) 2*GMB(X) AF... 2*AF... GK... 2*GK... 2 F6HD 118 200 13 lbs. 14 lbs. 2.5 F665HD 184 200 13 lbs. 24 lbs. 161 lbs. 32 lbs. 3 F680HD 264 200 15 lbs. 25 lbs. 4 F6100HD 470 200 30 lbs. 2 F7HD 118 200 44 lbs. 46 lbs. 2.5 F765HD 184 200 55 lbs. 65 lbs. 56 lbs. 3 F780HD 264 200 72 lbs. 74 lbs. 4 F7100HD 470 200 122 lbs. 124 lbs. Max GPM = Maximum US gallons of water (gpm) per minute, at room temperature, that will flow through the fully open valve without exceeding design velocity limits. COP = Close-Off Pressure stated in psi. This is the maximum differential pressure the valve will close-off against while maintaining a bubble tight seal. All SY series actuators are NEMA 4X rated and include 2 auxiliary switches and a heater. O904-02/12 - Subject to change. Belimo Aircontrols (USA), Inc. 4

HD Series Butterfly Valves Industrial Actuation (Average Assembly Weights) UNDERCUT MODELS 3-WAY 2-WAY ACTUATOR NON-SPRING RETURN Size Valve Max GPM COP SY1 SY2 SY3 SY4 2 F6HDU 118 14 lbs. 2.5 F665HDU 184 14 lbs. 3 F680HDU 264 15 lbs. 4 F6100HDU 470 46 lbs. 5 F6125HDU 734 lbs. 6 F61HDU 1058 54 lbs. 8 F6200HDU 1880 62 lbs. 10 F62HDU 2938 79 lbs. 12 F6300HDU 4230 98 lbs. 2 F7HDU 118 46 lbs 2.5 F765HDU 184 55 lbs. 3 F780HDU 264 84 lbs. 4 F7100HDU 470 134 lbs. 5 F7125HDU 734 163 lbs. 6 F71HDU 1058 197 lbs. 8 F7200HDU 1880 273 lbs. 10 F72HDU 2938 452 lbs. 12 F7300HDU 4230 603 lbs. O904-02/12 - Subject to change. Belimo Aircontrols (USA), Inc. FULL RATED MODELS 3-WAY 2-WAY ACTUATOR NON-SPRING RETURN Size Valve Max GPM COP SY2 SY3 SY4 SY6 SY7 SY8 SY10 SY12 2 F6HD 118 200 36 lbs. 2.5 F665HD 184 200 36 lbs. 3 F680HD 264 200 36 lbs. 4 F6100HD 470 200 46 lbs. 5 F6125HD 734 200 lbs. 6 F61HD 1058 200 54 lbs. 8 F6200HD 1880 200 86 lbs. 10 F62HD 2938 200 103 lbs. 12 F6300HD 4230 200 122 lbs. 14 F63HD 5758 1 131 lbs. 16 F6400HD 7520 1 197 lbs. 18 F64HD 9518 1 272 lbs. 20 F60HD 117 1 241 lbs. 24 F6600HD 16921 1 332 lbs. 30 F67HD 26438 1 833 lbs. 2 F7HD 118 200 65 lbs. 2.5 F765HD 184 200 77 lbs. 3 F780HD 264 200 84 lbs. 4 F7100HD 470 200 134 lbs. 5 F7125HD 734 200 163 lbs. 6 F71HD 1058 200 197 lbs. 8 F7200HD 1880 200 297 lbs. 10 F72HD 2938 200 452 lbs. 12 F7300HD 4230 200 603 lbs. 14 F73HD 5758 1 785 lbs. 16 F7400HD 7520 1 1140 lbs. 18 F74HD 9518 1 1408 lbs. 20 F70HD 117 1 1599 lbs. 24 F7600HD 16921 1 2419 lbs. Max GPM = Maximum US gallons of water (gpm) per minute, at room temperature, that will flow through the fully open valve without exceeding design velocity limits. COP = Close-Off Pressure stated in psi. This is the maximum differential pressure the valve will close-off against while maintaining a bubble tight seal. All SY series actuators are NEMA 4X rated and include 2 auxiliary switches and a heater. 5

Butterfly Valve Selection-Velocity Chart HDU/HD/VIC Series Valves COMMON COMMON SLAVE D163 COMMON SLAVE SLAVE CONFIG CODE X10 ON/OFF OR MOD@2VDC VALVE IS VALVE @ FAIL CONFIG CODE X20 ON/OFF OR MOD@2VDC VALVE IS VALVE @ FAIL CONFIG CODE X30 ON/OFF OR MOD@2VDC VALVE IS VALVE @ FAIL X11 X21 X31 X12 X22 X32 X13 X23 X33 X14 X24 X34 X15 X25 X35 X Specifies Bi-Directional Flow Capability Notes: 1. Slave Valve operates inversely of the Master Valve. 2. The Master Valve is always located on the run. 3. The Slave Valve may also have an actuator if required (Direct Coupled). 4. On/Off actuator normal position is a function of field logic. 5. Proportional actuator normal position is a function of the CCW/CW 6. All 3-way assemblies are designed for 90 degree actuator rotation. Flow in Std Weight Pipe (Fluid Velocity in GPM). Use with Resilient Seat BF Valves. Size 2 FPS 4 FPS 6 FPS 8 FPS 10 FPS 12 FPS 14 FPS 16 FPS 2 19 39 59 78 98 117 137 157 2½ 30 61 92 122 153 184 214 245 3 44 88 132 176 220 264 308 353 4 78 157 235 313 392 470 548 627 5 122 245 367 490 612 734 857 979 6 176 352 529 705 881 1058 1234 1410 8 313 627 940 1253 1567 1880 2193 27 10 490 979 1469 1958 2448 2738 3427 3917 12 705 1410 2115 2820 3525 4230 4935 5640 14 959 1919 2879 3838 4798 5758 6717 7677 16 1253 27 3760 13 6267 7520 8774 10027 18 1586 3173 4759 6345 7931 9518 11104 12690 20 1958 3917 5875 7834 9792 117 13709 15668 24 2820 5640 8460 11280 14100 16921 19741 22561 30 4406 8813 13220 17625 22032 26438 30845 35251 It is not recommended to exceed 12 feet per second through resilient seat butterfl y valves. Velocities greater than 12 fps may damage the valve liner and disc. If the maximum recommended velocity is exceeded, the valve may be damaged and/or the torque increased potentially exceeding the actuators capacity. O904-02/12 - Subject to change. Belimo Aircontrols (USA), Inc. 6

F6 Series, 2-Way, HDU Butterfly Valve psi bubble tight shut-off Long stem design allows for 2 insulation Valve face-to-face dimensions comply with API 609 & MSS-SP-67 Completely assembled and tested, ready for installation Application These valves are designed to meet the needs of HVAC and commercial applications requiring bubble tight shut-off for liquids. Typical applications include chiller isolation, cooling tower isolation, change-over systems, large air handler coil control, bypass and process control applications. The large C v values provide for an economical control valve solution for larger flow applications. Designed for use in Victaulic piping systems when mated to Victaulic 41 series flange nipples. Jobsite Note Valves should be stored in a weather protected area prior to construction. Complete installation recommendations can be found in Belimo s Installation and Maintenance Instructions for F6 HDU Butterfl y Valves. Technical Data Service chilled, hot water, 60% glycol Flow characteristic modifi ed equal percentage Controllable fl ow range 82 Sizes 2 to 12 Type of end fi tting for use with ANSI Class 125/1 fl anges Materials Body ductile iron ASTM A536 Body fi nish epoxy powder coated Disc 304 stainless steel Seat EPDM Shaft 416 stainless steel O-ring EPDM Bushings RPTFE Media temperature range -22 F to 2 F [-30 C to 120 C] Body pressure rating ASME/ANSI Class 125 Close-off pressure psi Rangeability 10:1 (for 30 to 70 range) Maximum velocity 12 FPS Leakage bubble tight Valve Nominal Size Type Suitable Actuators C v C v IN DN 90 60 [mm] 2-way Spring Non-Spring 115 44 2 F6HDU 196 75 2½ 65 F665HDU 302 116 3 80 F680HDU 600 230 4 100 F6100HDU 1022 392 5 125 F6125HDU 1579 605 6 1 F61HDU 3136 1202 8 200 F6200HDU 5340 2047 10 2 F62HDU 82 3062 12 300 F6300HDU AF Series AM Series GM Series DR SY Series DKR GK Series MOD ON/OFF Valve Size C v 10 20 30 40 60 70 80 90 F6HDU 2 115.06 3 7 15 27 44 70 105 115 F665HDU 2½ 196.10 6 12 25 45 75 119 178 196 F680HDU 3 302.20 9 18 39 70 116 183 275 302 F6100HDU 4 600.30 17 36 78 139 230 364 546 600 F6125HDU 5 1022. 29 61 133 237 392 620 930 1022 F61HDU 6 1579.80 45 95 205 366 605 958 1437 1579 F6200HDU 8 3136 2 89 188 408 727 1202 1903 2854 3136 F62HDU 10 5340 3 151 320 694 1237 2047 3240 4859 5340 F6300HDU 12 82 4 234 495 1072 1911 3062 05 77 82 7

F6 Series, 2-Way, HDU Butterfly Valve Maximum Dimensions (Inches) Valve Size C v 90 C v 60 A B C D(Max) BHC No. of Holes Lug Bolt Actuator Close-Off (PSI) 2 115 44 1.65 9.00 9.00 19. 4.75 4 5/8-11 UNC F665HDU 2½ 196 75 1.81 9.00 9.00 20.00 5. 4 5/8-11 UNC AF F680HDU 3 302 116 1.81 9.00 9.00 20. 6.00 4 5/8-11 UNC F6100HDU 4 600 230 2.05 9.00 9.00 21.00 7. 8 5/8-11 UNC 2*AF F6125HDU 5 1022 392 2.19 9.00 9.00 22.00 8. 8 3/4-10 UNC F6100HDU 4 600 230 2.05 8.00 8.00 17.00 7. 8 5/8-11 UNC GK F6125HDU 5 1022 392 2.19 8.00 8.00 17. 8. 8 3/4-10 UNC F61HDU 6 1579 605 2.19 8.00 8.00 22. 9. 8 3/4-10 UNC 2*GK F6HDU 2 115 44 1.65 7.00 7.00 15.00 4.75 4 5/8-11 UNC F665HDU 2½ 196 75 1.81 7.00 7.00 15. 5. 4 5/8-11 UNC AM F680HDU 3 302 116 1.81 7.00 7.00 16.00 6.00 4 5/8-11 UNC F6100HDU 4 600 230 2.05 8.00 8.00 17.00 7. 8 5/8-11 UNC GM F6125HDU 5 1022 392 2.19 8.00 8.00 17. 8. 8 3/4-10 UNC F61HDU 6 1579 605 2.19 8.00 8.00 22. 9. 8 3/4-10 UNC 2*GM/GK F61HDU 6 1579 605 2.19 6.00 4.00 18.00 9. 8 3/4-10 UNC DR/DKR F6HDU 2 115 44 1.65 4.25 4.25 15. 4.75 4 5/8-11 UNC F665HDU 2½ 196 75 1.76 4.25 4.25 16.00 5. 4 5/8-11 UNC SY1... F680HDU 3 302 116 1.78 4.25 4.25 16.25 6.00 4 5/8-11 UNC F6100HDU 4 600 230 2.05 8.00 13.00 22.00 7. 8 5/8-11 UNC F6125HDU 5 1022 392 2.19 8.00 13.00 22. 8. 8 3/4-10 UNC SY2... F61HDU 6 1579 605 2.19 8.00 13.00 23.00 9. 8 3/4-10 UNC F6200HDU 8 3136 1202 2.37 8.00 13.00 24.25 11.75 8 3/4-10 UNC SY3... F62HDU 10 5340 2047 2.67 8.00 13.00 25. 14.25 12 7/8-9 UNC F6300HDU 12 82 3062 3.01 8.00 13.00 27.25 17.00 12 7/8-9 UNC SY4... Spring Return Non-Spring Return Dimension A is compressed, add.125 for relaxed state. AF, AM and GM maximum actuator ambient temperature is 122 F. SY maximum actuator ambient temperature is 1 F. Model SY1 does not have handwheel - override is via 8mm wrench on bottom side of actuator. Application Notes 1. Valves are rated at psi differential pressure in the closed position. 2. Valves are furnished with lugs tapped for use with ANSI Class 125/1 fl anges. Installation fl anges and hardware are not included. 3. 2-way assemblies are furnished assembled and tested, ready for installation. 4. Dimension D allows for actuator removal without the need to remove the valve from the pipe. 5. Weather shields are available, dimensional data upon request. 6. Dual actuated valves have actuators mounted on a common valve shaft. 7. Belimo SY Series actuators are NEMA 4X rated. Dimensions D B C BF2WUDIM Flow Pattern % OF MAXIMUM FLOW 100 90 80 70 60 40 30 20 10 0 10 20 30 40 60 70 80 90 % OF VALVE ING 100 O904-02/12 - Subject to change. Belimo Aircontrols (USA), Inc. A 8

F7 Series 3-Way, HDU Butterfly Valve psi bubble tight shut-off Long stem design allows for 2 insulation Valve face-to-face dimensions comply with API 609 & MSS-SP-67 Completely assembled and tested, ready for installation Tees comply with ASME/ANSI B16.1 Class 125 fl anges Application These valves are designed to meet the needs of HVAC and commercial applications requiring bubble tight shut off for liquids. Typical applications include chiller isolation, cooling tower isolation, change-over systems, large air handler coil control, bypass and process control applications. The large C v values provide for an economical control valve solution for larger flow applications. Designed for use in Victaulic piping systems when mated to Victaulic 41 series flange nipples. Jobsite Note Valves should be stored in a weather protected area prior to construction. Complete installation recommendations can be found in Belimo s Installation and Maintenance Instructions for F7 HDU Butterfl y Valves. O904-02/12 - Subject to change. Belimo Aircontrols (USA), Inc. Technical Data Service chilled, hot water, 60% glycol Flow characteristic modifi ed linear Controllable fl ow range 82 Sizes 2 to 12 Type of end fi tting for use with ANSI 125/1 fl anges Materials Body ductile iron ASTM A536 Body fi nish epoxy powder fi nish Disc 304 stainless steel Seat EPDM standard Shaft 416 stainless steel O-ring EPDM Bushings RPTFE Media temperature range -22 F to 2 F [-30 C to 120 C] Body pressure rating ASME/ANSI Class 125 Close-off pressure psi Rangeability 10:1 (for 30 to 70 range) Maximum velocity 12 FPS Leakage bubble tight Nominal Size Type Suitable Actuators C v C v IN DN 90 60 [mm] 3-way Spring Non-Spring 115 44 2 F7HDU 196 75 2½ 65 F765HDU 302 116 3 80 F780HDU 600 230 4 100 F7100HDU 1022 392 5 125 F7125HDU 1579 605 6 1 F71HDU 3136 1202 8 200 F7200HDU 5340 2047 10 2 F72HDU 82 3062 12 300 F7300HDU AF Series AM GM Series SY Series MOD ON/OFF Valve Size C v 10 20 30 40 60 70 80 90 F7HDU 2 115.06 3 7 15 27 44 70 105 115 F765HDU 2½ 196.10 6 12 25 45 75 119 178 196 F780HDU 3 302.20 9 18 39 70 116 183 275 302 F7100HDU 4 600.30 17 36 78 139 230 364 546 600 F7125HDU 5 1022. 29 61 133 237 392 620 930 1022 F71HDU 6 1579.80 45 95 205 366 605 958 1437 1579 F7200HDU 8 3136 2 89 188 408 727 1202 1903 2854 3136 F72HDU 10 5340 3 151 320 694 1237 2047 3240 4859 5340 F7300HDU 12 82 4 234 495 1072 1911 3062 05 77 82 GK Series 9

0 F7 Series 3-Way, HDU Butterfly Valve Maximum Dimensions (Inches) Valve Size C v 90 A B C D(Max) BHC No. of Holes Lug Bolt Actuator Close-Off (PSI) F7HDU 2 115 4. 6.15 6.15 15. 4.75 4 5/8-11 UNC AF F765HDU 2½ 196 5.00 6.76 6.76 16.00 5. 4 5/8-11 UNC 2*AF F780HDU 3 302 5. 7.28 7.28 16.25 6.00 4 5/8-11 UNC F780HDU 3 302 5. 7.28 7.28 21.00 6.00 4 5/8-11 UNC GK F7100HDU 4 600 6. 8.55 8.55 21.75 7. 8 5/8-11 UNC F7125HDU 5 1022 7. 9.64 9.64 22.25 8. 8 3/4-10 UNC 2*GK F71HDU 6 1579 8.00 10.19 10.19 22.75 9. 8 3/4-10 UNC F7HDU 2 115 4. 6.65 6.15 15. 4.75 4 5/8-11 UNC AR F765HDU 2½ 196 5.00 6.76 6.76 16.00 5. 4 5/8-11 UNC F780HDU 3 302 5. 7.28 7.28 21.00 6.00 4 5/8-11 UNC GM F7100HDU 4 600 6. 8.54 8.54 21.75 7. 8 5/8-11 UNC F7125HDU 5 1022 7. 9.64 9.64 22.25 8. 8 3/4-10 UNC 2*GM F71HDU 6 1579 8.00 10.19 10.19 22.75 9. 8 3/4-10 UNC F7HDU 2 115 4. 6.15 6.15 15. 4.75 4 5/8-11 UNC SY1 F765HDU 2½ 196 5.00 6.76 6.76 16.00 5. 4 5/8-11 UNC F780HDU 3 302 5. 7.28 7.28 21.00 6.00 4 5/8-11 UNC F7100HDU 4 600 6. 8.55 8.55 21.75 7. 8 5/8-11 UNC SY2 F7125HDU 5 1022 7. 9.64 9.64 22.25 8. 8 3/4-10 UNC F71HDU 6 1579 8.00 10.19 10.19 22.75 9. 8 3/4-10 UNC F7200HDU 8 3136 9.00 11.37 11.37 24.25 11.75 8 3/4-10 UNC SY3 F72HDU 10 5340 11.00 13.58 13.58 30.00 14.25 12 7/8-9 UNC SY4 F7300HDU 12 82 12.00 15.01 15.01 32.00 17.00 12 7/8-9 UNC Spring Return Non-Spring Return AF maximum actuator ambient temperature is 122 F. SY... maximum actuator ambient temperature is 1 F. Model SY1 does not have hand wheel-override is via 8mm wrench on bottom side of actuator. Dimensions HS DWGP15 Application Notes 1. Valves are rated at psi differential pressure in the closed position. 2. Valves are furnished with lugs tapped for use with ANSI Class 125/1 fl an ges. Installation fl anges and hardware are not included. 3. 3-way assemblies are furnished assembled and tested, ready for installation. All 3-way assemblies require the customer to specify the 3-way confi guration prior to order entry to guarantee correct placement of valves and actuators on the assembly. 4. Dimension D allows for actuator removal without the need to remove the valve from the pipe. 5. Weather shields are available, dimensional data upon request. 6. Dual actuated valves have single actuators mounted on each valve shaft. 7. Bolts supplied are for shipping purposes only. Upon installation replace with an appropriate SAE grade 5 or better hardware. 8. Belimo SY Series actuators are NEMA 4X rated. D C A B S O904-02/12 - Subject to change. Belimo Aircontrols (USA), Inc. 10

F6 Series 2-Way, HD Butterfly Valve 200 psi (2 to 12 ) and 1 psi (14-30 ) bubble tight shut-off Long stem design allows for 2 insulation Valve face-to-face dimensions comply with API 609 & MSS-SP-67 Completely assembled and tested, ready for installation Application These valves are designed to meet the needs of HVAC and commercial applications requiring bubble tight shut-off for liquids. Typical applications include chiller isolation, cooling tower isolation, change-over systems, large air handler coil control, bypass and process control applications. The large C v values provide for an economical control valve solution for larger flow applications. Designed for use in Victaulic piping systems when mated to Victaulic 41 series flange nipples. Jobsite Note Valves should be stored in a weather protected area prior to construction. Complete installation recommendations can be found in Belimo s Installation and Maintenance Instructions for F6 HD Butterfl y Valves. O904-02/12 - Subject to change. Belimo Aircontrols (USA), Inc. Technical Data Service chilled, hot water, 60% glycol Flow characteristic modifi ed equal percentage Controllable fl ow range 82 Sizes 2 to 30 Type of end fi tting for use with ANSI 125/1 fl anges Materials Body ductile iron ASTM A536 Body fi nish epoxy powder coated Disc 304 stainless steel Seat EPDM standard Shaft 416 stainless steel O-ring EPDM Bushings RPTFE Media temperature range -22 F to 2 F [-30 C to 120 C] Body pressure rating ASME/ANSI Class 125/1 Close-off pressure 200 psi (2-12 ), 1 psi (14-30 ) Rangeability 10:1 (for 30 to 70 range) Maximum velocity 12 FPS Leakage bubble tight Valve Nominal Size Type Suitable Actuators C v C v DN IN 90 60 [mm] 2-way Spring Non-Spring 115 44 2 F6HD 196 75 2½ 65 F665HD 302 116 3 80 F680HD 600 230 4 100 F6100HD 1022 392 5 125 F6125HD 1579 605 6 1 F61HD 3136 1202 8 200 F6200HD 5340 2047 10 2 F62HD 82 3062 12 300 F6300HD 11917 4568 14 3 F63HD 16388 6282 16 400 F6400HD 21705 8320 18 4 F64HD 27908 10698 20 0 F60HD 43116 16528 24 600 F6600HD 73426 28146 30 7 F67HD MOD ON/OFF Valve Size C v 10 20 30 40 60 70 80 90 F6HD 2 115.06 3 7 15 27 44 70 105 115 F665HD 2-1/2 196.10 6 12 25 45 75 119 178 196 F680HD 3 302.20 9 18 39 70 116 183 275 302 F6100HD 4 600.30 17 36 78 139 230 364 546 600 F6125HD 5 1022. 29 61 133 237 392 620 930 1022 F61HD 6 1579.80 45 95 205 366 605 958 1437 1579 F6200HD 8 3136 2 89 188 408 727 1202 1903 2854 3136 F62HD 10 5340 3 151 320 694 1237 2047 3240 4859 5340 F6300HD 12 82 4 234 495 1072 1911 3062 05 77 82 F63HD 14 11917 6 338 715 1549 2761 4568 7230 10844 11917 F6400HD 16 16388 8 464 983 2130 3797 6282 9942 14913 16388 F64HD 18 21705 11 615 1302 2822 28 8320 13168 19752 21705 F60HD 20 27908 14 791 1674 3628 6465 10698 16931 25396 27908 F6600HD 24 43116 22 1222 2587 5605 9989 16528 26157 39236 43116 F67HD 30 73426 37 2081 4405 9545 17011 28146 44545 66818 73426 AF Series AM GM DR SY Series DKR GK 11

F6 Series 2-Way, HD Butterfly Valve Maximum Dimensions (Inches) Valve Size C v 90 C v 60 A B C D(Max) BHC No. of Holes Lug Bolt Actuator Close-Off (PSI) 2 115 44 1.65 9.00 9.00 19. 4.75 4 5/8-11 UNC AF 200 F665HD 2½ 196 75 1.81 9.00 9.00 20.00 5. 4 5/8-11 UNC 200 2*AF F680HD 3 302 116 1.81 9.00 9.00 20. 6.00 4 5/8-11 UNC 200 Spring Return F6100HD 4 600 230 2.05 8.00 8.00 21.00 7. 8 5/8-11 UNC 2*GK 200 F6HD 2 115 44 1.65 7.00 7.00 15.00 4.75 4 5/8-11UNC 200 AMB(X) F665HD 2½ 196 75 1.81 7.00 7.00 15. 5. 4 5/8-11UNC 200 F680HD 3 302 116 1.81 8.00 8.00 16.00 6.00 4 5/8-11 UNC GMB(X) 200 F6100HD 4 600 230 2.05 8.00 8.00 21.00 7. 8 5/8-11 UNC 2*GMB(X) 200 F6100HD 4 600 2.30 2.05 6.00 4.00 18.00 7. 8 5/8-11 UNC DR/DKR 200 F6HD 2 115 44 1.65 8.00 13.00 20.25 4.75 4 5/8-11 UNC 200 F665HD 2½ 196 75 1.76 8.00 13.00 20.75 5. 4 5/8-11 UNC 200 F680HD 3 302 116 1.78 8.00 13.00 21.00 6.00 4 5/8-11 UNC SY2 200 F6100HD 4 600 230 2.05 8.00 13.00 21.75 7. 8 5/8-11 UNC 200 F6125HD 5 1022 392 2.19 8.00 13.00 22.25 8. 8 3/4-10 UNC 200 F61HD 6 1579 605 2.19 8.00 13.00 22.75 9. 8 3/4-10 UNC SY3 200 F6200HD 8 3136 1202 2.37 12.00 15.00 29.00 11.75 8 3/4-10 UNC 200 F62HD 10 5340 2047 2.67 12.00 15.00 30.00 14.25 12 7/8-9 UNC SY4 200 F6300HD 12 82 3062 3.01 12.00 15.00 32.00 17.00 12 7/8-9 UNC 200 F63HD 14 11917 4568 3.02 12.00 15.00 33.00 18.75 12 1-8 UNC SY5 1 F6400HD 16 16388 6282 4.01 12.00 15.00 34. 21.25 16 1-8 UNC SY6 1 F64HD 18 21705 8320 4. 14.00 21.00 39.25 22.75 16 1 1/8-7 UNC 1 SY8 F60HD 20 27908 10698 5.00 14.00 21.00 41. 25.00 20 1 1/8-7 UNC 1 F6600HD 24 43116 16528 6.07 14.00 22.00 53.25 29. 20 1 1/4-7 UNC SY11 1 F67HD 30 73426 28146 6.51 14.00 22.00 57. 36.00 28 1 1/4-7 UNC SY12 1 Non-Spring Return Dimension A is compressed, add.125 for relaxed state. SY6 and larger available in 110/220 VAC versions only. AF, AM and GM maximum actuator ambient temperature is 122 F. SY... maximum actuator ambient temperature is 1 F. Application Notes 1. Valves are rated at 200 psi differential pressure in the closed position (SY... 1 psi 14 +). 2. Valves are furnished with lugs tapped for use with ANSI Class 125/1 fl anges. Installation fl anges and hardware are not included. 3. 2-way assemblies are furnished assembled and tested, ready for installation. 4. Dimension D allows for actuator removal without the need to remove the valve from the pipe. 5. Weather shields are available, dimensional data upon request. 6. Dual actuated valves have actuators mounted on a common valve shaft. 7. Belimo SY Series actuators are NEMA 4X rated. Flow Pattern % OF MAXIMUM FLOW 100 90 80 70 60 40 30 Dimensions D B C A BF2WUDIM O904-02/12 - Subject to change. Belimo Aircontrols (USA), Inc. 20 10 0 20 10 30 40 60 80 70 90 % OF VALVE ING 100 12

F7 Series 3-Way, HD Butterfly Valve 200 psi (2 to 12 ) and 1 psi (14-30 ) bubble tight shut-off Long stem design allows for 2 insulation Valve face-to-face dimensions comply with API 609 & MSS-SP-67 Completely assembled and tested, ready for installation Tees comply with ASME/ANSI B16.1 Class 125 fl anges Application These valves are designed to meet the needs of HVAC and commercial applications requiring bubble tight shut off for liquids. Typical applications include chiller isolation, cooling tower isolation, change-over systems, large air handler coil control, bypass and process control applications. The large C v values provide for an economical control valve solution for larger flow applications. Designed for use in Victaulic piping systems when mated to Victaulic 41 series fl ange nipples. Fail safe operation is possible with NSV-SY series battery backup systems. Jobsite Note Valves should be stored in a weather protected area prior to construction. Complete installation recommendations can be found in Belimo s Installation and Maintenance Instructions for F7 HD Butterfl y Valves. O904-02/12 - Subject to change. Belimo Aircontrols (USA), Inc. Technical Data Service chilled, hot water, 60% glycol Flow characteristic modifi ed linear Controllable fl ow range 82 Sizes 2 to 24 Type of end fi tting for use with ANSI 125/1 fl anges Materials: Body ductile iron ASTM A536 Body fi nish epoxy powder coated Disc 304 stainless steel Seat EPDM standard Shaft 416 stainless steel O-ring EPDM Bushings RPTFE Media temperature range -22 F to 2 F [-30 C to 120 C] Body pressure rating ASME/ANSI Class 125/1 Close-off pressure 200 psi (2-12 ), 1 psi (14-24 ) Rangeability 10:1 (for 30 to 70 range) Maximum Velocity 12 FPS Nominal Size Type Suitable Actuators C v C v IN DN 90 60 [mm] 2-way Spring Non-Spring 115 44 2 F7HD 196 75 2½ 65 F765HD 302 116 3 80 F780HD 600 230 4 100 F7100HD 1022 392 5 125 F7125HD 1579 605 6 1 F71HD 3136 1202 8 200 F7200HD 5340 2047 10 2 F72HD 82 3062 12 300 F7300HD 11917 4568 14 3 F73HD 16388 6282 16 400 F7400HD 21705 8320 18 4 F74HD 27908 10698 20 0 F70HD 43116 16528 24 600 F7600HD AF Series AM GM SY Series MOD ON/OFF Valve Size C v 10 20 30 40 60 70 80 90 F7HD 2 115.06 3 7 15 27 44 70 105 115 F765HD 2½ 196.10 6 12 25 45 75 119 178 196 F780HD 3 302.20 9 18 39 70 116 183 275 302 F7100HD 4 600.30 17 36 78 139 230 364 546 600 F7125HD 5 1022. 29 61 133 237 392 620 930 1022 F71HD 6 1579.80 45 95 205 366 605 958 1437 1579 F7200HD 8 3136 2 89 188 408 727 1202 1903 2854 3136 F72HD 10 5340 3 151 320 694 1237 2047 3240 4859 5340 F7300HD 12 82 4 234 495 1072 1911 3062 05 77 82 F73HD 14 11917 6 338 715 1549 2761 4568 7230 10844 11917 F7400HD 16 16388 8 464 983 2130 3797 6282 9942 14913 16388 F74HD 18 21705 11 615 1302 2822 28 8320 13168 19752 21705 F70HD 20 27908 14 791 1674 3628 6465 10698 16931 25396 27908 F7600HD 24 43116 22 1222 2587 5605 9989 16528 26157 39236 43116 GK 13

0 10 0 10 F7 Series 3-Way, HD Butterfly Valve Maximum Dimensions (Inches) Valve Size C v 90 A B C D(Max) BHC No. of Holes Lug Bolt Actuator Close-Off (PSI) F7HD 2 115 4. 6.15 6.15 20.25 4.75 4 5/8-11 UNC AF 200 F765HD 2½ 196 4. 6.76 6. 20.25 4.75 4 5/8-11 UNC 2*AF 200 F780HD 3 302 5.00 7.28 6.76 20.75 5. 4 5/8-11 UNC 2*GM/GK 200 F7HD 2 115 4. 6.15 6.15 20.25 4.75 4 5/8-11 UNC 200 F765HD 2½ 196 5.00 6.76 6.76 20.75 5. 4 5/8-11 UNC 200 SY2 F780HD 3 302 5. 7.28 7.28 21.00 6.00 4 5/8-11 UNC 200 F7100HD 4 600 6. 8.55 8.55 21.75 7. 8 5/8-11 UNC 200 F7125HD 5 1022 7. 9.64 9.64 22.25 8. 8 3/4-10 UNC 200 SY3 F71HD 6 1579 8.00 10.19 10.19 22.75 9. 8 3/4-10 UNC 200 F7200HD 8 3136 9.00 11.37 11.37 29.00 11.75 8 3/4-10 UNC 200 SY4 F72HD 10 5340 11.00 13.58 13.58 30.00 14.25 12 7/8-9 UNC 200 F7300HD 12 82 12.00 15.01 15.01 32.00 17.00 12 7/8-9 UNC SY5 200 F73HD 14 11917 14.00 17.02 17.02 33.00 18.75 12 1-8 UNC SY6 1 F7400HD 16 16388 15.00 18.39 18.39 38. 21.25 16 1-8 UNC SY7 1 F74HD 18 21705 16. 20.63 20.63 39. 22.75 16 1 1/8-7 UNC 1 SY9 F70HD 20 27908 18.00 23.00 23.00 41. 25.00 20 1 1/8-7 UNC 1 F7600HD 24 43116 22.00 27.9 27.9 53.25 29. 20 1 1/4-7 UNC SY12 1 Spring Return Non-Spring Return AF maximum actuator ambient temperature is 122 F. SY... maximum actuator ambient temperature is 1 F. SY6 and larger available in 110/220 VAC versions only. Application Notes 1. Valves are rated at 200 psi differential pressure in the closed position. 2. Valves are furnished with lugs tapped for use with ANSI Class 125/1 fl anges. Installation fl anges and hardware are not included. 3. 3-way assemblies are furnished assembled and tested, ready for installation. All 3-way assemblies require the customer to specify the 3-way confi guration prior to order entry to guarantee correct placement of valves and actuators on the assembly. 4. Dimension D allows for actuator removal without the need to remove the valve from the pipe. 5. Belimo SY Series actuators are NEMA 4X rated. 5. Weather shields are available, dimensional data upon request. 6. Dual actuated valves have single actuators mounted on each valve shaft. 7. Bolts supplied are for shipping purposes only. Upon installation replace with an appropriate SAE grade 5 or better hardware. D163 Note: For tee confi guration, please refer to page 4. 3-Way Confi guration Codes SLAVE COMMON ON/OFF OR CONFIG MOD@2VDC VALVE CODE VALVE IS @ FAIL X10 X11 X12 X13 X14 X15 X Specifies Bi-Directional Flow Capability COMMON CONFIG CODE X20 X21 X22 X23 X24 X25 SLAVE ON/OFF OR MOD@2VDC VALVE IS VALVE @ FAIL SLAVE CONFIG CODE X30 X31 X32 X33 X34 X35 COMMON Dimensions D ON/OFF OR MOD@2VDC VALVE IS VALVE @ FAIL A NOTES 1. Slave Valve operates inversely of the Master Valve. 2. The Master Valve is always located on the run. 3. The Slave Valve may also have an actuator if required (Direct Coupled). 4. On/Off actuator normal position is a function of fi eld logic. 5. Proportional actuator normal position is a function of the CCW/CW switch. 6. All 3-way assemblies are designed for 90 degree actuator rotation. ORDERING INFORMATION Please note that HD series BF valves over 18 and ALL sizes 3-way tee assemblies ordered with Configuration Codes 30-35 are special order/custom built and are NOT returnable. B C HS DWG11 O904-02/12 - Subject to change. Belimo Aircontrols (USA), Inc. 14