AUTO EJECT WP AUTOMATIC POWER LINE DISCONNECT AUTOMATIC EJECTORS. Section 7: Automatic Ejector Systems

Similar documents
AUTO EJECT WP MODEL #: WP-012 MODEL #: WP-120 MODEL #: WP-120 AUTOMATIC SHORELINE DISCONNECT INSTRUCTION MANUAL

Kussmaul Electronics, 170 Cherry Avenue, West Sayville, NY Ph: , Fax: ,

2018 Domestic Price List - Catalog 121. Section 1 - Battery Chargers and Battery Savers

Section 1 - Battery Chargers and Battery Savers

1967 to s 1967, Kussmaul Engineering is born. In 1975, the first Kussmaul Battery Charger is introduced.

SUPER 30 AUTO EJECT 30 AMP MODEL #: AUTOMATIC SHORE LINE DISCONNECT INSTRUCTION MANUAL

SUPER 30 AUTO EJECT -AE

Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly

Taxonomies, Classifications, and Categories CIRCUIT BREAKING, COMPRESSOR, CONVEYOR, MOTOR GENERATOR SET, POLARIZED, WELDER

Arktite Heavy Duty Circuit Breaking Plugs and Connectors

Instruction Sheet for Powertite Plug, Connector and Receptacle

AUTO REEL -AS MODEL #: AS AUTOMATIC CORD REEL WITH AUTO SAFE INSTRUCTION MANUAL

AE Series Pin and Sleeve Plugs, Connectors and Receptacles Weatherproof 600 Vac, 250 Vdc. Pressure Wire Terminals.

APJ Amp Pin & Sleeve Plug 3-W 4-P 250 VDC/600 Vac

Plugs and Receptacles: Hazardous Location

Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles

!!!!! !!!!!!! !!!!! ! 16VAC input voltage, 13.5VDC output voltage BRANCHES COUNTRYWIDE

Instructions for Installation, Operation and Maintenance of: "WSRD" Interlocked Receptacles 30, 60 & 100 Ampere

Standard Finishes Receptacles: epoxy powder coat Cord connector housings and caps: epoxy powder coat

A. Submit manufacturer's literature and technical data before starting work.

Selection Guide. Freeze Protection Heating Cable. Thermwire - Wrap. Thermwire - Wrap Pre-Assembled. Thermwire - Comp. Thermwire - Melt.

SUPER AUTO EJECT AUTOMATIC SHORELINE DISCONNECT 3 YEARS WARRANTY. Assembled in the UK by LUDO McGURK TRANSPORT EQUIPMENT LTD WILMSLOW - U.K.

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-Hazardous Areas

NATURAL HIGH IMPACT STRENGTH COPPER FREE ALUMINUM Number of Wires VAC AT 50 TO 400 HZ/250 VDC

Explosion Proof Receptacle - Integral Circuit Breaker - Class 2 Division 1-30 Amp 480VAC

Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles

STRAIGHT BLADE PLUGS & CONNECTORS

AUTO CHARGE LPC SERIES

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles

Marine Products 100 Ampere, 125/250 Volt and 3ØY 120/208 Volt Ship-to-Shore Cable Sets

3SE03 North American Limit Switches

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles

HBE 24 SCREW & CRIMP TERMINATED INSERTS

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles

AUTO CHARGE AMPS DELUXE AUTOMATIC BATTERY CHARGER. Section 1: Single Battery Systems

Dry Contact Closure Interface

ACP1034CD 100A 3W4P P&S Plug (600VAC/250VDC)

Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles

RMP SERIES INFORMATION GUIDE

Arktite Circuit Breaking CPS Receptacles and CPP Plugs Delayed Action Factory Sealed

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles

ACP6034BC 60A 3W4P P&S Plug (600VAC/250VDC)

Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles

Marina Power and Lighting, Inc. General Specifications for the Newport Harbor Mate

SUPER AUTO EJECT DELUXE COVER WITH DIGITAL DISPLAY

VIBRATION SELECTION GUIDE

Basic Kiln Repair Seminar - Topics. Basic Kiln Repair Seminar - Kiln Components. Basic Kiln Repair Seminar - Available Power

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles

PLUGS AND RECEPTACLES: NEC/CEC HAZARDOUS LOCATION

ARL2042 Receptacle. Long Description. Manufacturer Information PLUGS & RECEPTACLES GTIN Manufacturers Part Number UPC

Benefits. Safety. Durability. Performance. Russellstoll. Heavy Industrial/ Marine

LPT50BRD (8x11x3 Enclosure)

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles

PS1 Single High and Low Pressure & PS2 Dual Pressure Refrigeration Controls. Instruction Sheet PA October 2007

HP20 Series. Utilizes a Small #20 Size Shell Accommodates Up to 646 MCM Cable Patents Pending

THE SUPER 16 AUTO EJECT

SUBSTATION VACUUM CIRCUIT BREAKER (15.5KV)

SUBSTATION VACUUM CIRCUIT BREAKER (38KV)

SUBSTATION VACUUM CIRCUIT BREAKER (25.8 / 27KV)

ELECTRICAL SYSTEM RP-7

Cam-Lok Single Pole Connectivity. The industry standard for reliable service under the most severe operating conditions.

DBR Receptacle Class II, Division 1 and 2, Groups F, G Class III NEMA 3, 3R, 4, 4X, 9FG

SECTION SECTION. EATON 2014 Arrow Hart Buyers Guide

STRAIGHT BLADE PLUGS & CONNECTORS

Description. Order TECHNICAL SPECIFICATIONS

PF/PFQ. High amperage plugs & receptacles. Features and Ratings p. 132 PF/PFQ A p. 133 PF/PFQ Lugs p. 135 Spare parts p. 137 Dimensions p.

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles

MODEL CMS INSTALLATION INSTRUCTIONS A. INTRODUCTION 1. USAGE 2 2. HOW IT OPERATES 2 B. SPECIFICATIONS 1. ELECTRICAL 3 2.

CLEAN POWER TM CPS Series Operator s Manual

50 AMP TRANSFER RELAY DELAY - DUAL INPUT GENSET

Arrow Hart industrial grade power lock plugs, connectors and receptacles

VWSQ SERIES 30 AMP INTERLOCKED SWITCH RECEPTACLES

LPT50BRD (8x8x4 Enclosure)

DESIGN GUIDELINES LOW VOLTAGE SWITCHGEAR PAGE 1 of 5

LN-8. Semiautomatic Wire Feeder LINCOLN ELECTRIC

Weather Protective Devices

LPC 20 MODEL #: LOW PROFILE CHARGER AUTOMATIC SINGLE OUTPUT BATTERY CHARGER INSTRUCTION MANUAL

Single pole connectors

Amphenol 67 and 165 Series Miniaturized Standard Connectors

INSTRUCTION MANUAL. A battery protector for vehicles with equipment that Is operated with the engine not running. MODEL# INPUT: 12 Volts D.C.

3/8 & 1/2 NPT. with 3/8 and 1/2 NPT ports for 4 Way - 2 & 3 Position see Pg locate counterbores in body to control static squeeze on seals.

Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Newport Harbor Mate Utility Center

ENR Value Series Dead Front Interlocked Circuit Breaking Receptacles

30A SMART ENERGY MANAGEMENT SYSTEM TM

Arktite Plugs, Receptacles, and Connectors

Sealed Sensor Connector (SSC) System

Mizer Single Pump and Starter Box

DRILL CORD. Insulation Nominal Size. Approximate Amps Anixter. Number Number Thickness O.D.

3SE03 North American Limit Switches

PF/PFQ. High amperage plugs & receptacles. Features and Ratings p. 128 PF/PFQ A p. 129 PF/PFQ Lugs p. 131 Spare parts p. 133 Dimensions p.

The Quality of Light TM. MODEL: SSI-600-PDC Controller Operation Manual. Metaphase Technologies Inc. JAN-09

ISIMET/MAPA, LLC, an affiliate of WCM Industries, Inc. 103 CJ Wise Parkway Naples, TX (903) fax (903)

Shore Power Adapter...3. Wiring Devices...9 G W NEMA 5-15/20R. 30A Power Cord...1 Shore Power Adapter...3. Y Adapter A Shore Power Inlet...

POWERLINE 2000 Energy Management System TM

25.4. Molded Case Circuit Breakers. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents

NEC DBR Receptacle: Class II, Division 1 and 2, Groups F, G Class III NEMA 3, 3R, 4, 4X, 9FG

Cam-Lok. Single pole connectivity. The industry standard for reliable service under the most severe operating conditions.

U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof

Transcription:

AUTOMATIC EJECTORS 48 120v, 15amp NEMA 5-15P 12v, 250v, 15amp NEMA 6-15P 120v, 20amp NEMA 5-20P AUTO EJECT WP AUTOMATIC POWER LINE DISCONNECT CONNECTORS Highly reliable, industrial grade connectors, specially selected to function reliably with the Auto Ejects are provided with each unit. The Dynamic Disconnect is a coupling device wired between an Auto Eject and the vehicle and serves to only connect the A.C. power after the plug has been inserted into the Auto Eject. Upon vehicle startup the Dynamic Disconnect opens the load circuit before ejecting the plug. By providing the time delays on both application and removal of power, no arcing can occur at the connector. Note A.C.power must be present at the shore line connector in order to operate the Dynamic Disconnect ENCLOSURE The enclosure is fabricated from aluminum and contains a cutout and captive fasteners to mate with the Auto Eject mounting screws. Providing protection from road dirt and damage, this unit is suggested for all Auto Eject installations in which the mechanism is exposed to the elements or subject to damage. Outline Drawing: 012 OPTIONAL RETRACTILE CORD The retractile cord is a #12 or 14AWG, 3 conductor cord with an extended length of 20 ft. The Auto Eject connector may be installed at the other end to make this the ideal power input cable. The Auto Eject WP is a power input connector designed to be mounted in the side of a vehicle to permit connecting a 12 Volt D.C., 120 Volt A.C. or 250 Volt A.C. shore line. It comes with a weatherproof cover. The cover is spring loaded to close, preventing water from entering when the shore line is not connected. A solenoid wired to the vehicle s starter or dynamic disconnect is energized when the engine is started. This instantaneously drives the plug from the receptacle. This simple reliable device eliminates forever the broken cables which result when drivers forget to remove the shore line before driving away. The Auto Eject, is new and improved and now contains solid connector pins for longer life. Power output connections are made via a screw terminal strip to permit the installer to easily connect any length of wire. Model # Item Connector 091-18WP-120 Auto Eject 15 Amp 120V, 15 Amps 091-18WP-012 Auto Eject 15 Amp 12VDC, 250V 15A 091-20WP-120 Auto Eject 20 Amp 120V, 20 Amps 091-18CP Enclosure 091-18-098 Dynamic Disconnect 091-18D-14 Retactile Cord 14 Awg 091-18D-12 Retractile Cord 12 Awg WEATHERPROOF COVERS AVAILABLE IN RED, WHITE, GRAY, BLUE, SILVER, GOLD, BLACK &YELLOW. SPECIFY COLOR WHEN ORDERING AUTO EJECT. WHEN NOT SPECIFIED, YELLOW COVER WILL BE SUPPLIED. AUTO EJECTS SUPPLIED COMPLETE WITH MATING CONNECTOR.UNITS ALSO AVAILABLE FOR 24 & 42 VOLT ELECTRICAL SYSTEMS. REBUILDING KITS AVAILABLE. Outline Drawing: 011 Warranty: 2 Years TOLL FREE 800-346-0857 48

AUTOMATIC EJECTORS SUPER AUTO EJECT DELUXE AUTOMATIC POWER LINE DISCONNECT 120v, 15amp NEMA 5-15P 12v, 250v, 15amp NEMA 6-15P 120v, 20amp NEMA 5-20P CONNECTORS Highly reliable, industrial grade connectors, specially selected to function reliably with the Auto Ejects are provided with each unit. RUBBER CONNECTOR PROTECTOR The protector covers the plug with 1/8" rubber to protect it from impact damage. Nearby vehicles and equipment are also protected. RETRACTILE CORD The retractile cord is a #12 or 14AWG, 3 conductor cord with an extended length of 20 ft. The Auto Eject connector may be installed at the other end to make this the ideal power input cable. COLORS WEATHERPROOF COVERS AVAILABLE IN RED,WHITE, GRAY, BLUE, BLACK & YELLOW SPECIFY COLOR WHEN ORDERING AUTO EJECT. WHEN NOT SPECIFIED, YELLOW COVER WILL BE SUPPLIED. AUTO EJECTS SUPPLIED COMPLETE WITH MATING CONNEC- TOR. UNITS ALSO AVAILABLE FOR 24 & 42 VOLT ELECTRICAL SYSTEMS UPON REQUEST. The Super Auto Eject is a completely sealed automatic power line disconnect. This prevents contamination of the mechanism by road dirt and insures long reliable life even when mounted in the most severe environment. A novel internal switch arrangement closes and opens the 120 volt A.C. circuit after the mating connector is inserted and before the connector is ejected. This eliminates arcing at the connector contacts and assures long contact life. As with all Auto Ejects, the Super Auto Eject is connected to the starter circuit so that ejection occurs when the engine is cranked. BACK WIRE option For installation areas that need the wires to come from the rear of the Auto Eject. Just add -BW to the end of the part number when ordering. Model # Item Connector 091-55-15-120 Super Auto Eject 15 Amp 120 volts AC 15 Amps 091-55-15-DC Super Auto Eject 15 Amp 12 VDC, 250VAC 15 Amps 091-55-20-120 Super Auto Eject 20 Amp 120 volts AC 20 Amps 091-18D-14 Retractile Cord 14 Awg 091-18D-12 Retractile Cord 12 Awg 091-55-069 Rubber connector protector REBUILDING KITS AVAILABLE. Outline Drawing: 019 Warranty: 2 Years 49 TOLL FREE 800-346-0857 49

AUTOMATIC EJECTORS SUPER 30 AUTO EJECT 30 AMP DELUXE AUTOMATIC POWER LINE DISCONNECT TOTALLY AUTOMATIC OPERATION, NO PUSH BUTTON AUTOMATIC PLUG DETECTOR AUTOMATIC ANTI-ARC DEVICE BUILT-IN NO ARCING OF CONNECTOR MOUNTING PLATE INCLUDED CONNECTORS Highly reliable, industrial grade connectors, specially selected to function reliably with the Auto Ejects are provided with each unit. 30 AMPS 30 AMP CONNECTOR The new Super 30 Auto Eject is a completely sealed automatic power line disconnect. This prevents contamination of the mechanism by road dirt and ensures long reliable life even when mounted in the most severe environment. A novel plug detector closes and opens the 120 volt A.C. circuit after the mating connector is inserted and before the connector is ejected. This eliminates arcing at the connector contacts and assures long contact life. As with all Auto Ejects, the Super 30 Auto Eject is connected to the starter circuit so that ejection occurs when the engine is cranked. BACK WIRE option For installation areas that need the wires to come from the rear of the Auto Eject. Just add -BW to the end of the part number when ordering. COLORS WEATHERPROOF COVERS AVAILABLE IN BLUE,YELLOW, RED, WHITE, GRAY SPECIFY COLOR WHEN ORDERING AUTO EJECT. WHEN NOT SPECIFIED, YELLOW(120V) OR BLUE(250V) COVER WILL BE SUPPLIED. MODEL # ITEM CONNECTOR OPERATING 091-159-30-120 SUPER 30 AUTO EJECT 3PIN 120 volts 12 volts 091-159-30-250 SUPER 30 AUTO EJECT 3PIN 250 volts 12 volts 091-159-430-250 SUPER 30 AUTO EJECT 4PIN 250 volts 12 volts 091-159-30-120-24 SUPER 30 AUTO EJECT 3PIN 120 volts 24 volts 091-159-30-250-24 SUPER 30 AUTO EJECT 3PIN 250 volts 24 volts 091-159-430-250-24 SUPER 30 AUTO EJECT 4PIN 250 volts 24 volts 091-159-CON-3P-120 3 PIN CONNECTOR 120 volts 091-159-CON-3P-250 3 PIN CONNECTOR 250 volts 091-159-CON-4P-250 4 PIN CONNECTOR 250 volts AUTO EJECTS SUPPLIED COMPLETE WITH MATING CONNECTOR, COVER AND MOUNTING PLATE. Outline Drawing: 025 Warranty: 2 Years 51 TOLL FREE 800-346-0857 51

WEATHERPROOF COVERS Used With: WP Auto Eject, Wiring Kits, Receptacles WEATHERPROOF COVERS Used With: Super 15 & 20 Auto Eject, and Air Eject WP Adapter kit Used With: Super 30 Auto Eject MODEL 091-3XX MODEL 091-55XX MODEL 091-159XX Weatherproof covers M ode l N umbe r C olor U se d With N ote s 091-3RD RED W P Auto Eject 091-3YW YELLOW W P Auto Eject Standard color 091-3BL BLUE W P Auto Eject 091-3WH WHITE WP Auto Eject 091-3BLK BLACK W P Auto Eject 091-3GY GRAY W P Auto Eject 091-3SL SILVER W P Auto Eject Display purposes only 091-3GL GOLD W P Auto Eject Display purposes only 091-55RD RED Super Auto Eject 15,20 091-55YW YELLOW Super Auto Eject 15,20 Standard color 091-55BL BLUE Super Auto Eject 15,20 091-55W H W HITE Super Auto Eject 15,20 091-55BLK BLACK Super Auto Eject 15,20 091-55GY GRAY Super Auto Eject 15,20 091-159RD RED Super Auto Eject 30 091-159YW YELLOW Super Auto Eject 30 Standard color for 120v 091-159BL BLUE Super Auto Eject 30 Standard color for 250v 091-159W H W HITE Super Auto Eject 30 091-159GY GRAY Super Auto Eject 30 NAMEPLATES These nameplates are designed to be installed on the weatherproof covers MODEL # NAMEPLATE TYPE OF COVER 091-NP-01 AIR EJECT 091-3XX 091-NP-02 AIR COMPRESSOR 091-3XX 091-NP-03 BATTERY CHARGER 091-3XX 091-NP-04 BLOCK HEATER 091-3XX 091-NP-05 BATTERY CHARGER, BLOCK HEATER 091-3XX 091-NP-06 BATTERY CHARGER, AIR COMPRESSOR 091-3XX 091-NP-07 B. CHARGER, AIR COMP., B. HEATER 091-3XX 091-NP-KIT ALL NAMEPLATES 091-3XX 091-55NP-01 AIR EJECT 091-55XX 091-55NP-02 AIR COMPRESSOR 091-55XX 091-55NP-03 BATTERY CHARGER 091-55XX 091-55NP-04 BLOCK HEATER 091-55XX 091-55NP-05 BATTERY CHARGER, BLOCK HEATER 091-55XX 091-55NP-06 BATTERY CHARGER, AIR COMPRESSOR 091-55XX 091-55NP-07 B. CHARGER, AIR COMP., B. HEATER 091-55XX 091-55NP-KIT ALL NAMEPLATES 091-55XX 091-55XX 091-3XX 55 TOLL FREE 800-346-0857 55

ACCESSORIES Model 5278C Model 5678C Model 5378C RECEPTACLE, 120V 15AMP This 120 volt male power inlet receptacle is for those installations in which power is brought to the vehicle but an Auto Eject is not desired. Model 5-15P-H CONNECTOR, 120V 15AMP This 120 volt connector may be used with either an Auto Eject or the 5278C receptacle. DC CONNECTOR RECEPTACLE, 12V 15AMP This 12 volt male power inlet receptacle is for those installations in which power is brought to the vehicle but an Auto Eject is not desired. Model 6-15P-H CONNECTOR, 12V 15AMP This 12 volt connector may be used with either an Auto Eject or the 5678C receptacle. RECEPTACLE, 120V 20AMP This 120 volt male power inlet receptacle is for those installations in which power is brought to the vehicle but an Auto Eject is not desired. Model 5-20P-H CONNECTOR, 120V 20AMP This 120 volt connector may be used with either an Auto Eject or the 5378C receptacle. AC CONNECTOR Section 8: Manual Receptacles and Accessories Model 091-3-157 This 3 conductor, 15 ampere, twist lock connector is moisture resistant and provides a connection that cannot be accidentally interchanged with any of the standard A.C. connectors. Ideally suited for coupling D.C. to portable equipment. Model WPR-1 This kit contains a 20 amp, 120VAC power input receptacle, weatherproof cover, plastic water tight enclosure and a liquid tight connector for wire diameter 0.170 min to 0.470 max. 57 TOLL FREE 800-346-0857 57