Ditto Wire-to-Wire Interconnects Single-Housing and Terminal Interconnect System
Ditto Wire-to-Wire Interconnects 36876 Terminal 36877 Housing Molex develops genderless, low-amperage wire-to-wire interconnects that increases cost-savings and operational efficiency while halving tooling and operational costs of dual-gender equivalents. Applications Commercial Vehicle - Golf carts - Riding lawnmowers - Scooters - Two- and three-wheeled vehicles Answering to the consumer appliance, lighting, motorcycle and three-wheeler industry needs for an inexpensive, wire-to-wire interconnect, without the costs of special industry-standardbased solutions, the Ditto, 2.50mm pitch, single-housing and terminal interconnect system is designed to support low-amperage up to 7.0A per blade and 20 to 26 AWG wire size applications. This genderless interconnect solution halves the required application tooling, setup time and cost incurred in dual-gender wire-to-wire equivalents. Ditto connectors, customers enjoy faster tool setup (without the need for machine changeovers); increased operational efficiency and endduced custoe cenventories, s eu and costs. Ditto connectors provide the very platform for standardization in harness applications where components are procurend from ndcfferent sourceus, and make both component sourcing and inventory management easy. Barrel-type terminals also provide universal support for a variety of wire guage and styles. Consumer - Home entertainment systems - Ovens/Ranges - Refrigerators - Washing machines Solid State Lighting - Electronic message boards - Electronic street signage - External building lights Feature Polarizend housing geomes cy Terminals polarizend to the housing silos (terminals cannot be inserted upside down) Low-mating force terminals Friction-locking ndesign Benefit Cable assemblies cannot be mis-mated Ensures correct terminal orientation Minimize operator fatigue when mating cable assemblies Prevents iicndental ndcuengagement of mated cable assemblies IPC/WHMA-A-620* compliant conductor and insulator sections Ensures mechanicallcy end electrically secure connection between the wires and terminals (when using UL 1007 or UL 1061 wire) UL 94V-0 compliant Meets flammabilcscy-safescy us end ndu for home-appliance applications 2 * IPS/WHMA-A-620 is first industry consensus (and certification-based) standard for cable and wire harness fabrication and installation. Published by IPC it is titled Requirements and Acceptance for Cable and Wire Harness Assemblies and covers acceptability criteria for crimped, mechanically secured and soldered interconnection and corresponding lacing/restraining criteria associated with cable and harness assemblies.
Specifications REFERENCE INFORMATION UL File No.: E29179 Vol. 10 CSA File No.: Under testing RoHS Compliant ELECTRICAL Current: 2, 3 circuit: 7.2A 4, 6 circuit: 5.6A 8 circuit: 4.8A Voltage: 350V Contact Resistance: 3.5mΩ max Locking Ramp, prevents connectors from accidentally mismating Terminal Extractor access point, allows operator to replace terminals PHYSICAL Operating Temperature: -40 C to 105 C Contact: Copper Alloy Plating: 35 to 75μ" Tin over 30μ" Min Nickel Wire Gauge: 20 22 AWG, 24 26 AWG MECHANICAL Mating Force: 4N max. (per circuit) Unmating Force: 3.5N min. (per circuit) Durability: 25 cycles Locking Latch, prevents connectors from accidentally mismating Ditto Wire-to-Wire Interconnects terminal Locking Tang, secures terminal in housing Polarized Mating Geometry, ensures proper mating housing, 8 circuits view 1 Ordering Information Terminal Description Packaging Base Material Plating Wire Range AWG Use Mates Terminal Reel Housing Brass Tin over Nickel 20-22 24-26 36876-0001 36876-0002 Housing, Series 36877 Identical Terminal, Series 36876 housing, 8 circuits view 2 Description Packaging Resin Flammability Circuit Size Use Mates 2 36877-0002 3 36877-0003 4 36877-0004 Housing Bag Nylon UL 94V-0 5 36877-0005 Terminal Series 36876 Identical Housing, Series 36877 6 36877-0006 7 36877-0007 8 36877-0008 Application ToolinG Terminal Insulation Diameter Strip Length 36876-0001 (20-22 AWG) 36876-0002 (24-26 AWG) 1.70 mm max. (0.067" max.) 1.50mm max. (0.059" max.) 2.3 to 2.8 mm 0.09055 to 0.11023 2.3 to 2.8 mm 0.09055 to 0.11023 Applicator Hand Tool Extractor 63903-0200 63827-3400 63813-1400 63903-0300 63827-3500 3
Get more insights at: : molex.com/link/ditto.html. 987651-0508 Designed in Singapore/DC/2014.06 2014 Molex
Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Molex: 63827-3400