IP 0/NMA & IP 66/NMA 4X Compact Vector Control rive
APPLICATIONS General multi-function model IP 0/NMA Textiles oodworking Small andling Machine Simple Metal Processing Machine Tools Packaging & Labeling Food Processing Fan & Pumps VAC Tough enclosure model IP 66/NMA 4X Food processing : against washdown environment Textiles : against high heat and humid environment, like dyeing process Petrochemical industry : against corrosive environment Livestock industry : against washdown environment oodworking manufacturing : against dusty environment Sealed esign igh level of waterproof and dustproof
Identification 50 P5 F N4S Input Voltage orse Power Type Power Supply Noise Filter Appearance 50 series : 00V class 4: 400V class P5: 0.5 P 0: P 0: P 0: P 05: 5 P 08: P 0: 0 P 5: 5 P 0: 0 P 5: 5 P : Standard : Single-phase : Three-phase Blank: Single-/ Three-phase Blank: None F: Built-in N4S: IP66,built-in power switch and VR N4: IP66,without built-in power switch or VR N4R: IP66,built-in VR, without power switch Blank: IP0 Capacity Range Power Rating 0.4k 0.5P 0.75k P.5k P.k P.7k 5P 5.5k P k 0P k 5P 5k 0P 8.5k 5P 50 00V -phase (with filter) 00V -/ -phase 400V -phase 00V -phase Features and Benefits Capability / Function S/ Function xpansion Flexibility Quality Features bit RISC Processor with an advanced IGBT power switching technology Output frequency range is 0-650z Power range: 00V 0.4~5k (0.5P~0P) 400V 0.75~8.5k (P~5P) The latest generation of IGBT power module ith 7-segment *5 display panel Standard built-in VR knob Built-in MC filter in compliance with IC/ N 6800- & 6800-5- Fan control (set by parameter) Soft-PM modulation Integrated safety stop and fire mode functions Auto carrier frequency switching Built-in PI controller Built-in PLC function Built-in Modbus Communication (RS485) PC-software/ Copy unit xternal cooling heatsink Benefit Advanced sensorless vector control, providing a powerful starting torque at low frequency with high performance operation at the highest efficiency. New generation of IPM/ PIM power module can reach higher efficiency of switching and compact design of inverters. From this information, users can be easy to understand the usage state of inverters. irectly frequency setting and simple to adjust speed Lower electromagnetic interference effectively Fan control is based on the ambient temperature of key components to lower noise and avoid unnecessary energy wasted. Reduce audible motor noise at low carrier frequency Provide advanced application functions under the circumstance of emergency or fire. Built-in sensors detection on operation temperature to avoid the probability of inverter tripping in too high temperature. Provide constant control requirements of frequency, pressure, flow, air volume in applications, such as VAC Simple process control to save the cost of external PLC Fast parameters copying to reduce time of installation, maintenance and replacement. Reduce the possibility of unknown objects entering to avoid damaging components and improve product reliability.
iring iagram Single-phase/ Three-phase AC Power source Single-phase power input Molded-case circuit Magnetic breaker contactor MCCB MC ( ( Molded-case circuit breaker Magnetic contactor L (L) L (N) Braking resistor (Option ) AC Power source Three-phase power input MCCB ( ( MC L (L) * L P BR Inverter output T T T M Induction Motor ( L (N) Ground Multifunction Input Terminals F (Run/Stop) RV (Run/Stop) Speed Control Reset S S S S4 S5 S6 COM (NPN) Relay Output CON Pin to Pin 8 RA RB RC RS485 50 VAC/A (0VC/A) : ata+ : ata- : ata+ 4: RX0 5: TX0 6: ata- 7: 5V 8: GN Common point for PNP input +4V (PNP) Relay Output RA RB 50 VAC/A (0VC/A) xternal speed potentiometer =0 kohm or PI input Shield wires Output disable 0/~0V,0/4~0mA 0/~0V,0/4~0mA P P + - SF SG 0V AI AI AGN NPN AI AI J J J P P P PNP AV AV AO AGN + AO - Frequency Indicator 0~0VC P Shielded twisted-pair wires *: Power input terminal is L, L, L in models of 00V P~0P/ 400V P~5P.
General Specifications Frequency Run Main Control Features isplay Protective Functions Item Control Mode Output Frequency Starting Torque Speed Control Ratio Setting Resolution Setting Frequency Limit Operation Set V/F Curve Setting Carrier Frequency Acceleration and eceleration Control Multifunction Input Multifunction Output Multifunction Analog Output Main Features L L Status Indicator Overload Protection Over Voltage Under Voltage Momentary Power Loss Restart Stall Prevention Short-circuit Output Terminal Grounding Fault 50 V/F Control, Vector Control 0.0~599.00z 50%/z(V/F), 50%/z(Vector) :50 igital input: 0.0z Analog input:0.06z/60z Keypad: Set directly with keys or the VR on the keypad xternal Input Terminlas: AI/AI(0/~0V,0/4-0mA) Multifunction input up/down function(group) Setting frequency by communication method. Lower and upper frequency limits jump frequency settings. Keypad run, stop button xternal terminals: Multi-function operation mode ( or wire selection) Jog operation Run signal by communication method. 8 fixed curves and one customized curve 6Kz sections of acceleration/ deceleration time setting (0.~600.0 Sec.) 4 sections of S curve setting 9 functions (refer to group in the manual) functions (refer to group in the manual) 5 functions (refer to group 4 in the manual) Overload etection,6 preset speeds, Auto-run, Acc/ec Switch, Main/Alt Run Command Select, Main/Alt Frequency Command Select,PI control, Torque Compensation, V/F Start Frequency, Slip Compensation, Fault Reset. isplay: parameter / parameter value / frequency / line speed / C voltage / output voltage / output current / PI feedback / input and output terminal status / eat sink temperature / Program version / Fault Log. Run / Stop / Forward / Reverse,and etc. The relays to protect the motor and the inverter. (50%/min) 00V class: >40V, 400V class: >80V 00V class: <90V, 400V class: <80V Inverter auto-restart after a momentary power loss. Stall prevention for Acceleration/ eceleration/ Operation. lectronic Circuit Protection lectronic Circuit Protection Other Protection Functions All frames include brake transistor Communication control Operating temperature nvironment Storage temperature umidity Shock Protection for overheating of heat sink, the carrier frequency decreasing with the temperature function, fault output, reverse prohibit, prohibit for direct start after power up and error recovery,parameter lock up Standard built-in RS485 communication (Modbus), One to one or One to many control. IP 0 / NMA : -0~50 (without dustproof paster) -0~40 (with dustproof paster) IP 66 / NMA 4X : -0~50-0~60 95% R or less (no condensation)(compliance with IC 60068 - -78).0G, in compliance with IC 60068--6 IP 0 / NMA and IP 66 / NMA 4X 4
Basic Specifications IP 0/NMA orse Power (P) Suitable Motor Capacity (K) P5 0.5 0.4.. 8.5 00V Class: Single-phase 50- - F 0 0.75.7 0.5.9 Single-phase 00~40V, 50/60Z -5%~+0% Three-phase 0~40V 6.0.0 IP 0 NMA 0. 0.5 4.0.9 orse Power (P) Suitable Motor Capacity (K) P5 0.5 0.4.. 8.5/ 00V Class: Single-/Three-phase 50- - 0 0.75.7 0.5.9 Single-/Three-phase 00~40V, 50/60Z -5%~+0% Three-phase 0~40V /6.5 6/.0.0 IP 0 NMA 0. 0.5 4.0.9/.5 orse Power (P) Suitable Motor Capacity (K) 0.5.9.0 05 5.7 6.7 0.5.0 00V Class: Three-phase 50- - 08 5.5 6 9.9 0 0 5. 5 5 48 0.6 Three-phase 00~40V, 50/60Z -5%~+0% Three-phase 0~40V 4 57.0.0 IP 0 NMA 4 0 0 5 64 7.4 70 orse Power (P) Suitable Motor Capacity (K) 40 0.75..7 4. 40.5.8.9 40. 5. 4.0 400V Class: Three-phase 50- - (F) 405 5.7 8.8 6.7 408 5.5.0 9.9 40 0. Three-phase 80~480V, 50/60Z -5%~+0% Three-phase 0~480V 45 5 4 9. 5.6 7..6 7 8.0.0.0.0 IP 0 NMA 4 40 0 5 4 45 5 8.5 40 0.5 48
IP 66/NMA 4X orse Power (P) Suitable Motor Capacity (K) P5 0.5 0.4.. 8.5 00V Class: Single-phase 50- - F(N4)(S) 0 0.75.7 0.5.9 Single-phase 00~40V, 50/60Z -5%~+0% Three-phase 0~40V 6.0.0 IP 66 / NMA 4X 0. 0.5 4.0.9 orse Power (P) Suitable Motor Capacity (K) P5 0.5 0.4.. 8.5/ 00V Class: Single-/Three-phase 50- - (N4R) 0 0.75.7 0.5.9 Single-/Three-phase 00~40V, 50/60Z -5%~+0% Three-phase 0~40V /6.5 6/.0.0 IP 66 / NMA 4X 0. 0.5 4.0.9/.5 orse Power (P) Suitable Motor Capacity (K) 05 5.7 6.7 0.5.0 08 5.5 6 9.9 00V Class: Three-phase 50- - (N4) 0 0 5. 5 5 48 0.6 Three-phase 00~40V, 50/60Z -5%~+0% Three-phase 0~40V 4 57.0 IP 66 / NMA 4X.0 0 0 5 64 7.4 70 orse Power (P) Suitable Motor Capacity (K) 40 0.75..7 4. 40.5.8.9 40. 5. 4.0 400V Class: Three-phase 50- - (F)(N4)(S) *N4S 400V class to 5P only 405 5.7 8.8 6.7 408 5.5.0 9.9 40 0. Three-phase 80~480V, 50/60Z -5%~+0% Three-phase 0 480V 5.6 7..6 7.0.0.0 IP 66 / NMA 4X 45 5 4 9. 40 0 5 4 8.0 45 5 8.5 40 0.5 48 6
IP 0 / NMA (without filter series) imensions Unit: mm (inch) Frame 4 90.6 (.57) 8.7 (5.07) 86.9 (7.6) 4.6 (8.84) 80.5 (.7) 8 (4.65) 75 (6.89) 07 (8.5) 80.5 (.7) 8 (4.65) 76 (6.9) 07 (8.5) 6.6 (6.44) 87.6 (7.9) 60.9 (0.7).6 (.66) 5 (6.0) 77.6 (6.99) 49.8 (9.8) 0.5 (.95) 7.5 (6.84) 9 (7.78) 7 (0.75) 0.9 (.0) 49 (5.87) 50 (5.9) 97. (7.76) 00.7 (7.9) 7.8 (5.4).8 (5.7) 84 (7.4) 8 (7.8) Frame (weight:.7kg) Frame Frame Frame -Q Q Q - 48 (.89) 48. (.9) 76.7 (.0) 94 (.7) 4. (0.7) (0.8) (0.8) 6 (0.4) 4. (0.7) (0.8) (0.8) 6 (0.4) 4.8 (5.58) 89 (7.44) 9.5 (8) (weight:.5kg) -Q Frame Frame -Q -Q -Q -Q (weight:0.5kg) -Q -Q Frame 4 (weight:6.5kg) Frame
IP 66 / NMA 4X Unit: mm (inch) 50.8 (5.94) 98 (7.80).8 (8.77). (5.5) 5 () 40 (5.5) 48.7 (9.79) 7.9 (.0) 466. (8.6) Frame Frame Frame Frame 0. (9.06) 5 (.9) 460 (8.)Q 4. (8.4) 5 (.40) 440 (7.) 8 (7.0) 8.4 (8.60) 46.6 (9.7) Q Q Q 00 (7.87) 5. (9.6) 66.5 (0.49) 00 (7.87) 5. (9.6) 6.5 (0.7) 49.5 (.95) 79.8 (.4) 96 (.78) 5.4 (0.) 7 (0.8) 7 (0.8) 5.4 (0.) 7 (0.8) 7 (0.8) 0.6 (0.4) 5.98 (0.4).68 (0.50) *N4R model has no built-in power switch, so is not applicable. N4 model has no built-in power switch and VR, so and are not applicable. Frame Q (weight:5.98kg) (weight:.9kg) Frame Q Q Q Q (weight:.68kg) Frame Q Q 8
Accessories Accessories Function Notes Keypad extension cable JN5-CB-0M JN5-CB-0M JN5-CB-0M JN5-CB-05M Keypad extension cable for 50 series m m m 5m NMA Kits JN5-NK-0 JN5-NK-0 JN5-NK-0 JN5-NK-04 Mechanical device consisting of anti-dust cover on the upper part and wiring box on the bottom to meet NMA Only for frame Only for frame Only for frame Only for frame 4 Copy module JN5-CU uplicating parameters setting in one inverter to another inverter As a remote keypad to be used Using RJ45 line to connect inverter JN5-CM-PP For connection of Profibus-P communication protocol JN5-CM-TCPIP For connection of TCP-IP communication protocol Communication For 50 series modules JN5-CM-NT For connection of evicenet communication protocol JN5-CM-CAN For connection of CANopen communication protocol RJ45 to USB connection cable JN5-CM-USB Using the TCO exclusive PC-software line.8m Copy Unit (JN5-CU) RJ45 to USB (JN5-CM-USB)
MMO 0
0F, No. -, Park St., Nan-Kang, Taipei 5, Taiwan TL : 886--665-9xt.75 FAX : 886--665-0 http://globalsa.teco.com.tw Specifications covered in this brochure may be subject to change without notice. GJ-6-0 06-06-0