Nokia Mobile Holder CR-123 & Easy Mount HH-22 User Guide

Similar documents
Nokia Holder Easy Mount HH-12 & Nokia Mobile Holder CR /1

Nokia Car Kit CK-200 Quick Guide and Safety Information

Nokia Extra Power DC-11/DC-11K /2

LASER LEVEL KIT INTRODUCTION REVISION HISTORY UNDERSTANDING THIS MANUAL COPYRIGHT NOTICE CONTENTS...

Installation instructions for the TriVision Car Docking Station

Four-slot Charge Only Cradle

KHYBRID. Hybrid Mechanical Backlit Keyboard. Installation Quickguide

Pub Mounting Instructions For Automotive GPS Receivers

DSP led gaming monitor USER MANUAL

The Efficient Solution for Pipetting up to 100 ml at once! USER'S GUIDE

4 - SETTING UP THE MACROMAN CHARGING POSITION 4 Wall mounted 4 Workbench set-up 4

Technical Data 12HD.K 12V/24V DC DUAL VOLTAGE FUEL TRANSFER PUMP KIT. Please read carefully before commencing installation

Flexible Arm Stand F 360. User Manual

Battery Replacement. Installation Instructions. Summary of Changes. Catalog Number 2711P-RY2032. Original Instructions

190M. Medical ScopeMeter. Safety Information

VA-707x. Thermal Valve Actuators. Product Bulletin. Low and line voltage models available

StarEye. 350 ma version. No control electronics on board

This Regulation is established on the basis of subsections 26 (3) and (8) of the Waste Act.

Original Operating Manual

INSTRUCTION MANUAL SPECIFICATIONS:

Installation instructions

User Manual TABLE MAGNIFIER TL-70. User-friendly Manual ID: #05007

CONTENT 1 PICTURE GENERAL... 3

Mod: KLD6-12/35XLAS-N

80 Litre Suction Oil Drainer With Inspection Chamber

Technical Data 12HD.K 12V/24V DC DUAL VOLTAGE FUEL TRANSFER PUMP KIT. Please read carefully before commencing installation

Installation instructions

Operating instructions

Installation instructions

Installation instructions

Installation instructions

Installation instructions

Installation instructions

Installation instructions

Installation instructions

Suitable to Johnson Controls and almost all of terminal unit valve on the market

Installation instructions

Installation instructions

SCOPELITE TIMING LIGHT OPERATING MANUAL

Installation instructions

233 True-rms Remote Display Digital Multimeter Safety Information

original operating manual Operating manual Translation of the Item-No.: ,

Installation instructions

Lamp kit. Installation manual SIM 7 series R

SPARKSCAN1 HIGH VOLTAGE CLAMP OPERATING MANUAL

Installation instructions

Installation instructions

Installation instructions

Exchange of rollers from the XTS-Mover

Installation instructions

HST -LS Interlocking device (Translation of Original Manual)

Installation instructions

Installation instructions

Installation instructions

362 Clamp Meter. Users Manual

Installation instructions

Original Operating Manual

Installation instructions

Installation instructions

Installation instructions

NCSA 20plus Service Manual

Toothed belt axis ELGC-TB-KF. Operating instruction [ ]

User Manual of Bagibike Electric Bicycles

Spare Allen-Bradle. Battery Replacement. Installation Instructions. About This Publication. Catalog Number 2711P-RY2032

Installation instructions

Installation instructions

3.25 Ton Heavy Duty Floor Jack

Installation instructions

Module B Module C FOR THE WEATHER CONTROLLER MULTI-MIX INSTALLATION MANUAL REVISION: 1.0_EN

Installation instructions

Installation instructions

Manual Introduction and Overview

User manual Pipe notcher Type: AL 1-2E

Installation instructions

Installation instructions

Window Thermometer models / / 00423

OPERATING MANUAL. A5 MIG Orbital System

Accessories for Wind Power Inverter WINDY BOY PROTECTION BOX 400 / 500 / 600

Installation instructions

Installation instructions

Installation instructions

Installation instructions

CHAdeMO ADAPTER OWNER S MANUAL

STC2 Car Kit. Installation Guide

Battery for electric bicycle drive EVBAT36V7A

2-Year Limited Warranty. See the Users Manual for the full warranty.

CU2 Closed Loop Module

Instruction manual. RP800 - HYDRAULIC actuator, load 150Kg. RP815 - LINAK actuator, load 150Kg

These operating instructions apply for: NCX 380 NCZ 300 NCX 480 NCZ 370 NCX 580 L NCZ 480 NCX 660 K NCZ 560 NCZ 660 NCZ 800

Installation instructions

Catalyser Introduction. 3. Hazard Information. 2. Area of Application. 3.1 Symbology

Installation instructions

FENIEX ROCKER PANEL Series MODEL # D-11971

Installation and Operating Instructions Magnetic Vibrator MR 1

3. Operating instructions: Minor 200

3 Ton Trolley Jack. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.

WK 120QMM-6M/Z EL 120QMM-6M/M12

6-2 Interior equipment

Installation instructions

Bosch Smart Home. Door/Window Contact Instruction Manual

Transcription:

Nokia Mobile Holder CR-123 & Easy Mount HH-22 User Guide Issue 1.0

2 About your car holder With the Nokia Mobile Holder CR-123 & Easy Mount HH-22, you can access your phone easily at all times. Attach the holder to the windscreen or dashboard of your car, and you're ready to go. Parts 1 Clamps 2 Holder 3 Bottom support 4 Clamp release lever 5 Tightening nut 6 Mounting plate 7 Mount 8 Suction cup 9 Mount locking lever Attach the holder to the mount Slide the holder onto the mount, until it locks into place. To remove the holder from the mount, slide the holder up, until it comes away.

3 Attach the car holder to the windscreen Before you start, make sure that both the windscreen and suction cup are clean and dry. Make sure the mount locking lever is released. 1 Place the suction cup against the desired spot of the windscreen, making sure the stem of the mount is extending up and towards you 2 Press the suction cup evenly against the windscreen, and press the mount locking lever closed. Remove the holder from the window Release the mount locking lever, and lift from the tab on the edge of the suction cup.

4 Attach the car holder to the dashboard Before you start, make sure that the dashboard and the top of the mounting plate are clean and dry. 1 Remove the protective film from the adhesive on the underside of the mounting plate. Place the mounting plate on the desired spot on the dashboard. To make sure there is a strong adhesive bond, press the plate down, firmly and evenly. 2 Make sure the mount locking lever is released, and position the car holder on the mounting plate, with the mounting stem extending up and towards you. 3 Press the mount locking lever closed. Remove the holder from the mounting plate Release the mount locking lever, and lift from the tab on the edge of the suction cup. Adjust the holder angle To avoid glare and view the screen of your phone more easily, you can adjust the angle of the holder.

5 Tip: Holder not turning easily? To loosen the tightening nut, turn it clockwise. Check periodically that the holder is securely in place. Re-tighten the tightening nut, if necessary. Place your phone in the holder vertically 1 Turn the holder so that the clamps are on the left and right and the bottom support is pointing down. Tip: Holder not turning easily? To loosen the tightening nut, turn it clockwise. 2 To widen the clamps, lift and hold the clamp release lever. 3 Pull the bottom support out slightly.

6 4 Place your phone in the holder, and adjust the bottom support, until the phone is at a height where it is secure. 5 Push the clamps together, until the phone is firmly in place. Make sure the clamps don't cover any important controls on your phone, such as the power key. Place your phone in the holder horizontally 1 Turn the holder so that the clamps are at the top and bottom. Tip: Holder not turning easily? To loosen the tightening nut, turn it clockwise. 2 Pull out the bottom support completely.

7 3 To widen the clamps, lift and hold the clamp release lever. 4 Place your phone in the holder. 5 Push the clamps together, until the phone is firmly in place.

8 Make sure the clamps don't cover any important controls on your phone, such as the power key. Take care of your device Handle your device with care. The following suggestions help protect your warranty coverage: Do not drop, knock, or shake the device. Rough handling can break delicate mechanics. Use only a soft, clean, dry cloth to clean the surface of the device. General safety instructions Read these simple guidelines. Not following them may be dangerous or illegal. For further information, read the complete user guide. Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. Only operate the mounting device or mobile holder if it is safe to do so under all driving conditions. When you install the mounting device or mobile holder, make sure that they do not interfere with or hinder the steering or braking systems or other systems used in the operation of the vehicle (for example, airbags) or disturb your field of vision while driving. Check that the deployment of the airbag is not blocked or impaired in any way. Make sure that the mounting device or mobile holder is not installed where you might come in contact with it in the event of an accident or collision. Periodically check that the suction cup at the bottom of the mounting device is firmly attached to the windscreen, especially if the ambient temperature changes a lot. Do not place or remove a mobile phone while driving. To learn more about how to use your product, or if you are unsure how your product should work, see the support pages at www.nokia.com/support. Recycle The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that all applicable materials must be taken to separate collection at the end of their working life. This requirement applies in the European Union. Do not dispose of these products as unsorted municipal waste. For more information on the environmental attributes of your device, go to www.nokia.com/ecoprofile.

9 For information on how to recycle your old Nokia products and where to find collection sites, go to www.nokia.com/werecycle, or call a Nokia Care contact centre. Recycle packaging and user guides at your local recycling scheme. Copyright and other notices DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this CR 123&HH 22 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/ phones/declaration_of_conformity/. 2011 Nokia. All rights reserved. Nokia, Nokia Connecting People are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. The availability of particular products may vary by region. Please check with your Nokia dealer for details. This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. /Issue 1.0 EN