From Pure to Sterile MAIN FEATURES & BENEFITS: High dirt holding capacity at low differential pressure and high flow rate Highly durable stainless steel design Regenerable by ultrasonication or backflushing For the filtration of air, steam and liquids Approved for Food Contact Use acc. to CFR Title 21 & 1935/2004/EC INDUSTRIES: Chemical Industry Food & Beverage Paint Environmental Industry Pharmaceutical Industry Donaldson Filtration Deutschland GmbH Büssingstr. 1 42781 Haan (Germany) Phone: +49 (0) 2129 569 0 Fax: +49 (0) 2129 569 100 E-mail: IFS-de@donaldson.com Web: www.donaldson.com
PRODUCT DESCRIPTION The filter element consists of a regenerable, pleated filter matrix with stainless steel outer guard and end caps. The retention rate extends from 1 µm nominal up to 250 µm nominal in water. The stainless steel filter is designed and developed for the following applications: Liquid Filtration The filter element offers an exceedingly economical pre- and final filtration, where the stainless steel filter matrix can be regenerated by ultrasonication or backflushing. This is especially important at higher particle loads. The heavy-duty construction of the filter is also suitable for high-viscosity liquids and can withstand a differential pressure of up to 5 bar (flow from outside to inside). In addition, the filter can be used for temperatures up to 200 C. All components meet the USA requirements for Food Contact Use in accordance with CFR (Code of Federal Regulations) Title 21. The filter element is manufactured in accordance with the manufacturing requirements, has no migration of filter media and is non-fibre releasing. Water filtration Chemicals Solvents Pharmaceutical industry Food and beverage Syrup Cosmetics Paints Salt- and Seawater Coolants Gas Filtration Compressed air Carbon dioxide Nitrogen Tank Ventilation Highly aggressive gases Steam Filtration - 2 - PRODUCT DESCRIPTION
PRODUCT SPECIFICATIONS Product Specifications Filtration Surface: 0,25 m 2 per 250 mm element (10 ) Temperature Range: For other element sizes see correction factor CF in section Available end cap configurations -50 C (-60 F) to 200 C (400 F) > 150 C (300 F) welded end caps only Maximum Differential Pressure: (Flow Direction: Outside to Inside) 5 bar (75 psid), independent of the system pressure or temperature RETENTION RATES Filter Rating (water) 1 µm 5 µm 25 µm 50 µm 100 µm 250 µm Nominal (~ 98 %) 1 µm (~95%) 4 µm 15 µm 40 µm 60 µm 200 µm Absolute (> 99,98 %) 4 µm 5 µm 25 µm 60 µm 100 µm 250 µm Retention Rates (Air, 20 C, 90 Nm3/h, 10/30 Element) Pore Size [µm] 98 % [µm] >99,9 % [µm] Thickness [mm] 1 0,3 < 1 0,37 5 1 < 5 0,35 25 15 25µm 0,17-3 - PRODUCT SPECIFICATIONS
MATERIAL COMPLIANCE USA All components of the filter element are FDA listed for food contact use in the Code of Federal Regulations (CFR), Title 21. Filter Materials CFR Title Filter Matrix: Stainless Steel 1.4301 211.65 End Caps: Stainless Steel 1.4301 211.65 Bonding Materials: O-Rings: Alternatively: Plastic Steel Silicone Silicone Buna EPR PTFE over silicone PTFE over viton 177.2450 177.1550 177.1550 All products have been inspected and released by Quality Assurance as having met the following requirements: All filters are fabricated without the use of binders, adhesives, additives or surfaceactive agents. All filter components based on plastics are non-toxic and are certified bio-safe in accordance with current USP Class VI Tests for Plastic. MATERIAL COMPLIANCE EU The Donaldson filter element is available with a silicone-based bonding material which meets the guideline for Food Contact Use as given in European Regulation (EC) Number 1935/2004. This specific element is suited for Food Contact Use since all components meet the requirements of the 1935/2004/EC for materials and products intended to come in contact with food stuff (excluding o-rings). For specific details on the O-rings, please contact your Donaldson Sales Engineer. -4- MATERIAL COMPLIANCE
FLOW CHARACTERISTICS (P)-SM, 10, Deionised water, 25 C Initial Diff. Pressure [mbar] 200 180 160 140 120 100 80 60 40 20 0 1 µm 5 µm 25 µm 25 µm 50 µm 0 5 10 15 20 25 100 µm Flow [l/min] (P)-SM, 10, air, 25 C, 1 bar absolute 30 Initial Diff. Pressure [mbar] 25 20 15 10 5 1 µm 5 µm 25 µm 0 0 20 40 60 80 100 120-5 - FLOW CHARACTERISTICS
AVAILABLE END CAP CONFIGURATIONS Dimensions (CODE 7 connection): CODE 7 Size a b c mm inch mm inch mm inch 5 128 5,04 142 5,59 56,5 22,2 10 250 9,84 315 12,40 56,5 2,22 20 500 19,68 585 22,24 56,5 2,22 30 750 29,53 815 32,08 56,5 2,22 c b a CODE 7: 2 x 226 o-rings, bayonet 2 locking tabs, locating fin Dimensions (uf plug connection): uf plug Connection Size a b C* CF** mm inch mm inch mm inch 03/10 76 2,99 87 3,42 30 1,18 0,12 04/20 104 4,09 118 4,64 37 1,46 0,19 05/20 128 5,04 142 5,59 37 1,46 0,25 05/30 128 5,04 144 5,67 61 2,40 0,46 07/30 180 7,08 196 7,71 61 2,40 0,68 10/30 254 10 270 10,63 61 2,40 1,00 15/30 381 15 397 15,63 61 2,40 1,55 20/30 510 20 526 20,63 61 2,40 2,10 30/30 764 30 780 30,63 61 2,40 3,28 30/50 764 30 780 30,63 89 3,50 5,89 c b a * Plug- type connection with double-o-ring ** Correction Factor Filtration Surface & Flow Rate Other end cap configurations on request. Technical alterations reserved 04/2009 For information on integrity test equipment or integrity test services, please contact your Donaldson Sales Engineer and visit our website at www.donaldson.com!