Table of Contents Worksurfaces & Support Statement of Line 1 3 16" Worksurfaces page 328 1 9 16" Worksurfaces page 329 Transaction Counters page 330 Table Tops page 331 Support page 332 Planning Product Information page 337 Application Guidelines page 338 Pricing & Specifying 1 3 16" Worksurfaces page 350 1 9 16" Worksurfaces page 416 Transaction Counters page 431 Table Tops page 434 Support page 436 Mobile Statement of Line Mobile Tables page 450 Planning Overview page 451 Pricing & Specifying Mobile Tables page 452 Storage Statement of Line Undersurface Storage page 457 Overhead Storage page 459 Vertical Storage page 461 Planning Overview page 463 Product Information page 464 Filing Capacities page 467 Locking Information page 476 Lock Core Requirements page 477 Pricing & Specifying Undersurface Storage page 479 Overhead Storage page 492 Vertical Storage page 510 Kimball Office Systems ** Effective August 15, 2012 ** Page 327 Worksurfaces
Worksurfaces & Support 1 3 16" Worksurfaces Statement of Line Product Information page 337 Application Guidelinespage 338 Note: Right-hand worksurfaces are shown. Shapes marked with an asterisk (*) are unique to the 1 3 16" offering. L C R Straight s 350 356 to specify. L Arc 357 to specify. R L C R L C R Wedge* Available in left and right models. s 358 361 to specify. Serpentine* Available in left and right models. s 362 363 to specify. 1 3 16" Rim Profiles: C C C C R C R L L Plastic (P) Wood Sloped Softened (F) Edge (S) IMPORTANT: All rim profiles are not available on all worksurface shapes. See applicable pricing page. Corner Available in curved, straight, split, and extended curved* models. s 364 372 to specify. L R Serpentine Corner* Available in left and right models. s 373 376 to specify. C R 120 Curved Corner* Available in left and right models. s 377 to specify. R C Extended Straight* Available in left and right models. s 378 401 to specify. R C L L L Grommets: Factory-installed grommets are available through elec - tronic specification tools for single and double rim worksur - faces. Factory-installed grommet option includes black plastic grommet (models 99KG50, 99KG60, 99KG80); upcharge of $68 per grommet applies. Grommet locations are indicated on the illustrations at right. L = Left R = Right C = Center Note: Not all grommet locations are available for all surfaces. Use electronic specification tools for available options. Extended Arc* Available in left and right models. 402 to specify. R C L P Tops Available in left and right models. 410 to specify. Wire Manager Filler Caps 415 to specify. Extended Wedge* Available in left and right models. s 404 406 to specify. R C L U Tops Available with full radius or crowned end*. s 411 412 to specify. Extended P Tops Available in left and right models. 407 to specify. D-Shape and Wedge Spanner* 413 to specify. Kimball Office Systems Page 328 R C L Extended U Tops Available in left and right models. s 408 409 to specify. Quarter Round* 414 to specify.
Worksurfaces & Support 1 9 16" Worksurfaces Statement of Line Product Information page 337 Application Guidelinespage 338 1 9 16" Rim Profiles: L C R L R R C R C L L Self Edge (J) Plastic (P) Straight s 416 420 to specify. Arc 421 to specify. Extended P Tops Available in left and right models. 422 to specify. Extended U Tops Available in left and right models. 423 to specify. Waterfall (K) Wood Softened (F) Wood Reed (W) Wood Scalloped (X) C C Wood Transitional (E) IMPORTANT: All rim profiles are not available on all worksurface shapes. See applicable pricing page. R C L P Tops Available in left and right models. 424 to specify. R C L U Tops 425 to specify. Straight Corner s 426 427 to specify. Straight Split Corner 428 to specify. Grommets: Factory-installed grommets are available through elec - tronic specification tools for single and double rim worksur - faces. Factory-installed grommet option includes black plastic grommet (models 99KG50, 99KG60, 99KG80); upcharge of $68 per grommet applies. C Curved Corner s 429 430 to specify. Wire Manager Filler Caps 415 to specify. Grommet locations are indicated on the illustrations at right. L = Left R = Right C = Center Note: Not all grommet locations are available for all surfaces. Use electronic specification tools for available options. Kimball Office Systems Page 329 Worksurfaces
Worksurfaces & Support Transaction Counters Statement of Line For Use with Xsite and Interworks EQ: Product Information page 337 Application Guidelinespage 338 Straight Transaction Counter 431 to specify. For Use with Cetra: Straight Transaction Counter 432 to specify. End Counter Soffit 433 to specify. Straight Counter Soffit 433 to specify. Kimball Office Systems Page 330
Worksurfaces & Support Table Tops Statement of Line Product Information page 337 Application Guidelinespage 345 Round Table Tops Available in 1 3 16" and 1 9 16" thicknesses. s 434 435 to specify. Square Table Tops Available in 1 3 16" thickness only. 434 to specify. Rectangular Table Tops Available in 1 3 16" thickness only. 434 to specify. Racetrack Table Tops Available in 1 3 16" and 1 9 16" thicknesses. s 434 435 to specify. Kimball Office Systems Page 331 Worksurfaces
Worksurfaces & Support Worksurface Support Statement of Line For Use with Xsite: Application Guidelinespage 338 Xsite Worksurface Edge Support 436 to specify. Xsite End-Support Leg 436 to specify. Xsite MId-Support Leg 436 to specify. Xsite Stick Support Leg 436 to specify. Xsite Adjustable Mid-Support and Flat Brackets 436 to specify. Xsite Transaction Counter 436 to specify. For Use with Cetra: Cetra Edge Brackets 437 to specify. Cetra Drop and Flat Brackets 437 to specify. Cetra Cantilevers 438 to specify. Cetra Support Panels 438 to specify. Kimball Office Systems Page 332
Worksurfaces & Support Worksurface Support Statement of Line, continued For Use with Interworks EQ: Application Guidelinespage 342 Interworks EQ Edge Support Brackets 439 to specify. Interworks EQ Transaction Counter Brackets 439 to specify. Interworks EQ Drop and Flat Brackets 439 to specify. Interworks EQ Cantilever Brackets 440 to specify. Interworks EQ Support Panels 440 to specify. Kimball Office Systems Page 333 Worksurfaces
Worksurfaces & Support Worksurface Support Statement of Line, continued For Use with Traxx and Freestanding Applications: Application Guidelinespage 344 Traxx Worksurface Brackets 441 to specify. Freestanding End Supports Available in wood and laminate. 442 to specify. Freestanding Corner Supports Available in wood and laminate. 442 to specify. Freestanding Undersurface Support Panel Available in wood and laminate. 442 to specify. Modesty Panels Available in wood and laminate. 443 to specify. Metal Support Panels Available in half and full models. 444 to specify. Metal Return Support Panels Available in 8" and 12"W models. 444 to specify. Metal Worksurface Support Panels 444 to specify. Metal Corner Posts 444 to specify. Metal Modesty Panels 445 to specify. Support Panel Brackets 446 to specify. Kimball Office Systems Page 334
Worksurfaces & Support Worksurface Support Statement of Line, continued Universal Support: Application Guidelinespage 348 Gusset Bracket 446 to specify. Column Legs 446 to specify. Adjustable Column Legs 446 to specify. Tapered Legs 446 to specify. Decorative Support Legs and Inserts 447 to specify. Metal Modesty Panels 447 to specify. T- and X-Bases 448 to specify. Cylinder Base 449 to specify. Half Cylinder Base 449 to specify. Kimball Office Systems Page 335 Worksurfaces
Worksurfaces & Support Worksurfaces Overview 1 3 16" Rim Profiles: Options: Worksurfaces are available in three rim options wire manager, single rim, and double rim. Note: Only select shapes are available with double rim. See appropriate pricing page for available rim options. Wire Single Double Manager Rim Rim Wire manager option has the selected rim detail on the front edge and a wire manager on the back edge. Side edges are finished to match the top surface. Exception: Sides on 1 3 16" laminate surfaces with plastic rim (P) are finished to match the rim. Single-rim option has the selected rim detail on the front edge only. Sides and back are finished to match the front rim. Double-rim option has the rim detail on the front and back edges. Sides are finished to match the front and back rims. Custom modifications are available at an upcharge on select models without running through as a special order. These include factory-installed grommets, wire managers, rims, mitering, and special dimensions. Use an electronic specification tool. Worksurfaces have a solid core with a laminate (HPL), wood, or thermofoil surface. Thermofoil worksurfaces feature a protective polymer layer that is heat formed over an MDF core. Worksurface can be panel or Traxx mounted, or used in freestanding applications. Xsite Traxx mounted worksurfaces allow for flexible horizontal positioning which provides exceptional offmodular capabilities. Slots on Cetra and Interworks EQ panels allow worksurfaces to be mounted at any height in 1" increments. Additional support can be provided by mid-supports, cantilevers, pedestals, column legs, and support panels. Traxx brackets attach worksurface to bottom Traxx in Traxx-mounted applications. Corner and end supports are available to create freestanding modular casegoods. Undersurface storage and modesty panels can be used with worksurfaces to create freestanding applications. Traxx/Panel Mounted Xsite Traxx-Mounted Freestanding Kimball Office Systems Page 336 Plastic (P) Wood Sloped Softened (F) Edge (S) Three rim profiles are available on 1 3 16" worksurfaces: sloped, plastic, and wood softened. Sloped rim is available on thermofoil worksurfaces only. Plastic rim is avail able on laminate worksurfaces only. The wood softened rim is available on laminate or wood worksurfaces. 1 9 16" Rim Profiles: Self Edge Plastic (P) Waterfall (K) (J) Wood Wood Wood Softened (F) Reed (W) Scalloped (X) Wood Transitional (E) Seven rim profiles are available on 1 9 16" worksurfaces. Self edge, plastic, and waterfall rim profiles are available on laminate work surfaces only. Wood softened, reed, scalloped, and transitional rim profiles are available on laminate or wood worksurfaces. IMPORTANT: All rim profiles are not available on all worksurface shapes. See pricing pages.
Worksurfaces & Support Finishes and Materials: Worksurfaces Thermofoil Laminate Wood Rims Sloped on thermofoil worksurface Plastic on laminate worksurface Wood on laminate or wood worksurface Laminate on 1 9 /16" laminate worksurface with self edge or waterfall rim Wire Manager Plastic, specified to coorindinate with worksurface Custom Modifications: Custom modifications can be specified using an electronic specification tool for select models without running through as a special order. These include factoryinstalled grommets, additional wire managers, rims, or mitering. Special dimensions are available on straight worksurfaces by specifying the next larger standard model and selecting the special cut down dimension option. Upcharges apply; not available on Kwik Office models. Note: Special dimensions on worksurface shapes other than straight must be custom quoted. Worksurfaces Product Information Details Two worksurface thicknesses are available: 1 3 /16" and 1 9 /16". IMPORTANT: While the 1 3 /16" and 1 9 /16" worksurfaces are offered in the same materials, they are not inter - changeable and cannot be used next to each other. Wire manager profile work - surfaces have a flexible rubber trough that allows cords and cables to be routed along the back edge of the worksurface. Tables are ideal for private offices and team work areas. Two table top thicknesses are available 1 3 16" and 1 9 16" to complement the worksurface offering. Cylinder and half-cylinder bases are available for use with table tops. Table support bases include an antitip weight. Connections When using straight work - surfaces with sloped rims perpen dicular to each other, there will be a valley where the slopes meet. It is recommended that extended worksurfaces be specified where possible to eliminate the valley between surfaces. Worksurfaces can be scribed on site to conform to oblique angles, irregular column placement, and historical preservation guidelines. Planning Factors Too narrow Workstations using curvilinear worksurfaces need special planning to ensure there is proper clearance. Some curved work - surfaces, such as the wedge or extended wedge, will extend into the workspace making the work area too narrow for a chair. Specify corner surface in appropriate size to provide ample workspace. See pricing pages for dimensions. IMPORTANT: When using curvilinear worksurfaces, it is recommended that mobile undersurface storage is used. Standard grain direction for wood, woodgrain laminate, and woodgrain thermofoil worksurfaces runs the length of the worksurface. However, depending on the worksurface shape and the material, the direction can vary. See pricing pages for grain direction on specific worksurface models. Kimball Office Systems Page 337 Worksurfaces Application Guidelinespage 338 Note: Special attention should be given to wood grain direction when specifying a corner worksurface in a U-configuration. If a different grain direction other than the standard is required, worksurfaces must be custom quoted. Related Products Brackets are available to attach worksurfaces to all Kimball Office Systems and adjacent worksurfaces. s 436 439. Support components are available to make worksurfaces freestanding. s 442 449. Accessories, including center drawer and keyboard trays, are available to add functionality to the work area. See the Perks Price List.
Worksurfaces & Support General Notes: Worksurfaces may be used with all Kimball Office Systems. Specify appropriate bracketry and support for the application. Consider the worksurface load when planning support. For worksurfaces that will hold office equipment, such as laser printers and copiers, supplemental support other than standard bracketry is recommended. Undersurface storage and pedestals satisfy both storage and support needs. Reconfigurations of existing worksurfaces may require new supports or brackets. Supports may be positioned anywhere along the worksurface without the limitations of pre-drilled or pre-determined locations. HFES Method 2 can be met when using worksurfaces and storage with keyboard kit model 99K2319KKS1. See the Perks Price List. Application Guidelines Cetra-Supported Worksurfaces IMPORTANT: Supports and brackets must be specified separately for all worksurfaces. Specify the appropriate supports or brackets for the specific application. Supports and brackets are packaged separately from worksurfaces. IMPORTANT: Careful consideration must be given to dimensions when using curvilinear worksurfaces. It is recommended that mobile undersurface storage be used. End-to-end panel-supported worksurfaces require the additional support of a cantilever, support panel, or undersurface storage at every joint. Perpendicular panel-supported worksurfaces can use flat brackets and edge support brackets to provide adequate support at the worksurface joint. Column or tapered legs can provide additional support for worksurfaces. Support panels may also be used. Verify dimensions before specifying. Corner and straight worksurfaces Serpentine corner and wedge worksurfaces Corner and straight worksurfaces Extended wedge, serpentine corner, and quarter round worksurfaces Straight worksurfaces Product Information page 337 Bracketry and Support Guidelines for Cetra Panel-Mounted Worksurfaces Note: Worksurface spans greater than 48"W for 1 3 16" surfaces and 60"W for 1 9 16" surfaces require additional support. LEGEND = Edge Support Bracket = Cantilever = Pedestal = Flat Bracket = Leg Kimball Office Systems Page 338
Worksurfaces & Support Application Guidelines Cetra-Supported Worksurfaces, continued Product Information page 337 Cetra panel-mounted worksurfaces must be supported by edge support brackets, flat brackets, cantilevers, support panels, undersurface storage units, or universal support components. Note: When using 1 3 16" worksurfaces with Cetra sectional panels or midwireway panels, approximately 3 8" of the panel or bottom tile will be visible above the worksurface. Unsupported span of 48" for 1 3 16" worksurfaces or 60" for 1 9 16" worksurfaces requires additional support, such as a cantilever, support panel, or undersurface storage. Brackets should be utilized at every panel joint to fully support the surface and to tie the panels to the worksurface. Edge support brackets attach to the panel's slotted vertical channel and provide the most secure method of supporting a worksurface. They must be secured to the underside of the worksurface. The supporting panel width must be equal to the worksurface depth. They also provide corner support for corner worksur faces and are used as additional support behind an attached storage unit. Drop brackets are used to attach adjacent worksurfaces at varying heights. They provide a 3" height change. Flat brackets are used to align and secure two perpendicular or end-toend worksurfaces. Cetra panel-mounted support panels are 1 1 4" thick and are available in four depths 12", 18", 24", and 30". 18", 24", and 30"D support panels are used on the end of worksurfaces that are not panel wrapped. Support panels can also be used as additional support for worksurfaces that exceed the recommended kneespace. They should be attached to the panel in back of the worksurface and to the underside of the worksurface to provide maximum strength. Panel and worksurface brackets are attached; however, they can be reversed for left- or right-hand applications. 12"D support panels are intended for use as additional support in the middle of a run when kneespace exceeds the recommended span. 12"D support panels do not attach to panel reveals. Support panels may be used in freestanding or Traxx applications when modesty panels are not used as long as the back edges are not exposed. Back edges of support panels are unfinished. If the back edge of the support panel will be exposed, request that it be finished. Support panels are equipped with adjustable leveling glides to align the worksurfaces. They provide 1 1 4" of adjustment. Note: Cetra support panels may be used in Interworks EQ, freestanding, or Traxx applications by removing panel brackets and ordering a support panel bracket or gusset bracket for additional support as needed. If back edge of support panel will be exposed, request that it be finished. If modesty panel is required, specify a freestanding support panel. Pedestals provide support for the front edge of worksurfaces. A back bracket must also be used to attach the surface to the panel. Cantilevers are used as support in the center of long worksurfaces or in configurations where other support methods are not possible. They may be used as support when placing two surfaces end to end. Cantilevers may be used as sole support when wing panel width is different than worksurface depth. A pedestal or support panel must be used if there is no wing panel. Cantilevers are handed, however, they can share the load of the adjacent worksurface with use of flat brackets. Universal support components are available for use as additional alternative support solutions. Kimball Office Systems Page 339 Worksurfaces
Worksurfaces & Support General Notes: Worksurfaces may be used with all Kimball Office Systems. Specify appropriate bracketry and support for the application. Application Guidelines Xsite-Supported Worksurfaces IMPORTANT: Supports and brackets must be specified separately for all worksurfaces. Specify the appropriate supports or brackets for the specific application. Supports and brackets are packaged separately from the worksurfaces. Product Information page 337 Bracketry and Support Guidelines for Xsite Panel-Mounted Worksurfaces Note: Worksurface spans greater than 48"W for 1 3 16" surfaces and 60"W for 1 9 16" surfaces require additional support. Consider the worksurface load when planning support. For worksurfaces that will hold office equipment, such as laser printers and copiers, supplemental support other than bracketry is recommended. Undersurface storage and pedestals satisfy both storage and support needs. Reconfigurations of existing worksurfaces may require new supports or brackets. Supports may be positioned anywhere along the worksurface without the limitations of pre-drilled or pre-determined locations. IMPORTANT: Careful consideration must be given to dimensions when using curvilinear worksurfaces. It is recommended that mobile undersurface storage be used. End-to-end panel-supported worksurfaces require the additional support of a mid-support, support panel, or undersurface storage at every joint. Perpendicular panel-supported worksurfaces can use flat brackets and edge support brackets to provide adequate support at the worksurface joint. Column, stick, or tapered legs can provide additional support for worksurfaces. They can provide support to the front edge of a worksurface, but do not stabilize adjacent loadbearing panels. Support panels may also be used. Verify dimensions before specifying. Xsite-mounted worksurfaces must be supported on the ends by edge support brackets, full-depth support panels, end-support legs, or undersurface storage unit. Unsupported span of 48"W for 1 3 16" worksurfaces or 60"W for 1 9 16" worksurfaces requires additional support such as a mid-support, support panel, or undersurface storage. Flat brackets, 12"D support panels, or mid-supports should be used as additional support at every worksurface joint. Additional support is also required every 48" on 1 3 16" worksurfaces and every 60" on 1 9 16" worksurfaces. Use Xsite Traxx with edge support brackets to support the ends of worksurfaces whenever possible. This ties the station together providing more rigidity for the structure. Corner and straight worksurfaces Serpentine corner and wedge worksurfaces LEGEND = Edge Support Bracket = Mid-Support = Pedestal = Flat Bracket = Leg Corner and straight worksurfaces Straight worksurfaces Extended wedge, serpentine corner, and quarter round worksurfaces Kimball Office Systems Page 340
Worksurfaces & Support Application Guidelines Xsite-Supported Worksurfaces, continued Product Information page 337 Brackets adjust for worksurface heights from 27 3 4" to 29", at 5 8" increments, measured from the floor to the top of the 1 3 16" worksurface. Flat Bracket Mid-support legs are visually compatible with end-support legs. They require a flat bracket, specified separately, and must be secured to the worksurface but not to the tile and frame. Two edge support brackets are required for the back corner of corner surfaces, one on each side. Specify quantity of worksurface edge support brackets to match worksurface size and type. Adjustable Mid-Support Adjustable worksurface mid-supports may be used as additional support. They cannot provide support at the end of a worksurface and can only be used with an end-support leg in balanced configurations. They do not extend far enough under the worksurface to provide sufficient support in one-sided configurations. Adjustable mid-supports are not visually compatible with end-support legs. 2-high adjustable mid-supports will adjust vertically from 27 3 4" to 29", at 5 8" increments, measured from the floor to the top of the worksurface. 3-high adjustable mid-supports will adjust vertically from 40 1 4" to 41 1 2", at 5 8" increments, measured from the floor to the top of the 1 3 16" worksurface. Specify adjustable mid-supports to match worksurface depth. Flat brackets are used to align and secure two perpendicular or end-toend worksurfaces. End-support legs are for use at the end of panel run or in the middle of a run in place of a mid-support. They must be used with a worksurface and be attached vertically with two screws to the panel frame (through the tile) and to the worksurface. The worksurface conceals the attachment holes in the top of the leg. End support legs are not applicable to 6- and 7-high configurations. Transaction counter brackets recess into Xsite s top channel and are screwed to the frame. Top cap is required beneath a transaction counter. The width of the top cap should match the width of the frame to which the transaction counter will be mounted. Top cap must be modified in the field to accommodate transaction counter brackets. Specify two transaction counter brackets for 24" to 60"W counters. Specify four brackets for 66" to 96"W counters. Transaction counter brackets will not interfere with cables routed through the top channel. Kimball Office Systems Page 341 Worksurfaces
Worksurfaces & Support Application Guidelines Interworks EQ-Supported Worksurfaces Product Information page 337 General Notes: Worksurfaces may be used with all Kimball Office Systems. Specify appropriate bracketry and support for the application. Consider the worksurface load when planning support. For worksurfaces that will hold office equipment, such as laser printers and copiers, supplemental support other than standard bracketry is recommended. Undersurface storage and pedestals satisfy both storage and support needs. Reconfigurations of existing worksurfaces may require new supports or brackets. Supports may be positioned anywhere along the worksurface without the limitations of pre-drilled or pre-determined locations. IMPORTANT: Supports and brackets must be specified separately for all worksurfaces for the specific application. Supports and brackets are packaged separately from the worksurfaces. IMPORTANT: Careful consideration must be given to dimensions when using curvilinear worksurfaces. It is recommended that mobile undersurface storage be used. End-to-end panel-supported worksurfaces require the additional support of a cantilever, support panel, or undersurface storage at every joint. Perpendicular panel-supported worksurfaces can use flat brackets and edge support brackets to provide adequate support at the worksurface joint. Column or tapered legs can provide additional support for worksurfaces. Support panels may also be used. Verify dimensions before specifying. Bracketry and Support Guidelines for Interworks EQ Panel-Mounted Worksurfaces Note: Worksurface spans greater than 48"W for 1 3 16" surfaces and 60"W for 1 9 16" surfaces require additional support. Corner and straight worksurfaces Serpentine corner and wedge worksurfaces Corner and straight worksurfaces Extended wedge, serpentine corner, and quarter round worksurfaces LEGEND = Edge Support Bracket = Cantilever = Pedestal = Flat Bracket = Leg Straight worksurfaces Kimball Office Systems Page 342
Worksurfaces & Support Application Guidelines Interworks EQ-Supported Worksurfaces, continued Interworks EQ panel-mounted worksurfaces should be supported by edge support brackets, flat brackets, support panels, cantilevers, undersurface storage units, or universal support components. Edge support brackets attach to the panels slotted vertical channel and provide the most secure method of supporting a worksurface. They must be secured to the underside of the worksurface. Unsupported span of 48" for 1 3 16" worksurfaces or 60" for 1 9 16" worksurfaces requires additional support, such as a cantilever, support panel, or undersurface storage. Edge support brackets should be used at every panel joint to fully support the worksurfaces and to tie the panels to the worksurface. They manually hook into the panel side rail to prevent accidental removal. They support the worksurface at the front and back corners. The supporting panel width should be equal to the worksurface depth. They also provide corner support for corner worksurfaces and are used as additional support behind an attached storage unit. Drop brackets are used to attach adjacent worksurfaces at varying heights. They provide a 2" height change. Flat brackets are used to align and secure two perpendicular or end-toend worksurfaces. Interworks EQ panel-mounted support panels are available in four depths 12", 18", 24", and 30". They are used on the end of worksurfaces that are not panel wrapped. Support panels can also be used as additional support for worksurfaces that exceed the recommended kneespace. They should be attached to the panel in back of the worksurface and to the underside of the worksurface to provide maximum strength. Panel and worksurface brackets are attached, however, they can be reversed for left- or right-hand applications. They are equipped with adjustable leveling glides that provide 1" of adjustment to align the worksurfaces. Cantilevers are available 24"D. They are used as added support in the center of long worksurfaces or in configurations where other support methods are not possible. They may be used as support when placing two surfaces end to end or with suspended pedestals. A pedestal or support panel must be used if there is no wing panel. Cantilevers are handed, however they can share the load of adjacent worksurface with the use of flat brackets. Pedestals provide support for the front edge of worksurfaces. A back edge support bracket must also be used to attach the surface to the panel. Universal support components are available for use as additional alternative support solutions. Product Information page 337 Kimball Office Systems Page 343 Worksurfaces
Worksurfaces & Support Application Guidelines Traxx-Supported Worksurfaces See page Product Information page 337 Notes: Worksurfaces may be used with all Kimball Office Systems. Specify appropriate bracketry and support for the application. Consider the worksurface load when planning support. For worksurfaces that will hold office equipment, such as laser printers and copiers, supplemental support other than standard bracketry is recommended. Undersurface storage and pedestals satisfy both storage and support needs. Reconfigurations of existing worksurfaces may require new supports or brackets. Supports may be positioned anywhere along the worksurface without the limitations of pre-drilled or predetermined locations. Traxx worksurface brackets attach worksurfaces to bottom Traxx. Traxx-mounted worksurfaces must be supported by worksurface brackets, flat brackets, support panels, undersurface storage units or universal support components. A bracket is required every 48" along back edge of worksurface in addition to corner and end locations. Note: When using 1 3 16" worksurfaces with Traxx, approximately 3 8" of the bottom Traxx will be visible above the worksurface. End-to-end worksurfaces require a support panel or undersurface storage for additional support of the front edge. Perpendicular worksurfaces can use flat brackets and Traxx brackets to provide adequate support from one surface to the other at the worksurface joint. Universal support components, such as tapered, stick, or column legs, are available as alternative support solutions for worksurfaces. See page 446. Bracketry and Support Guidelines for Traxx-Mounted Worksurfaces Note: Worksurface spans greater than 48"W for 1 3 16" surfaces and 60"W for 1 9 16" surfaces require additional support. Corner and straight worksurfaces; Traxx wrapped Corner and straight worksurfaces; support panels Traxx Worksurface Bracket Attachment Corner and straight worksurfaces; storage LEGEND = Traxx bracket =Pedestal = 12" support panel = 10" mid-support = Support panel = Flat bracket Note: 12" support panels and 10" mid-supports are interchangeable. If 10" mid-support is used,only one flat bracket is required; 12" support panels, require two flat brackets, and a Traxx bracket. Worksurface brackets have an anti-kickout design that provides secure attachment without predetermined positioning. Kimball Office Systems Page 344
Worksurfaces & Support Application Guidelines Freestanding Worksurfaces Product Information page 337 Freestanding worksurfaces can be created by configuring a stable combination of freestanding support panels, freestanding end supports, freestanding corner supports, square or flat profile undersurface storage. Note: Radius profile storage is designed to be positioned within a desk shell. Wood and Laminate Freestanding corner supports provide support for corner worksurfaces in freestanding applications. Universal support components, such as tapered or column legs, are available as alternative support solutions for worksurfaces. 446. Flush appearance is achieved by specifying the modesty panel to be the same width as the worksurface. It will cover the back of storage units or supports. Modesty filler strip is used if a modesty panel is not specified. It maintains space for cable routing behind the pedestal and fills the 1 1 8" difference in depth. Flat brackets are used to align and secure two perpendicular or end-toend worksurfaces. Freestanding undersurface support panels are used to support worksurfaces in freestanding applications. Their depth is 1 1 8" less than the worksurface to accommodate a modesty panel. Modesty panels provide undersurface privacy, additional support, and a finished appearance. They may be used in freestanding applications. Hardware is included for attachment to the underside of the worksurface. Note: When using a modesty panel with a 30"D radius-profile pedestal, the worksurface must be 36"D. Breakfront appearance is achieved by specifying three modesty panels. Two 18"W modesty panels to cover the backs of square profile pedestals and one equal to the width of the space between the pedestals. Note: Breakfront appearance can only be achieved with square profile storage. Drop brackets are used to attach adjacent worksurfaces at varying heights. They provide a 3" height change. Column, stick, and tapered legs cannot be used in freestanding applications. Freestanding end supports are used to support worksurfaces in a freestanding application. Work surf - aces used in freestanding appli - cations must be attached to a return or extension worksurface for additional support. Bracketry and Support Guidelines for Freestanding Worksurfaces Note: Worksurface spans greater than 48"W for 1 3 16" surfaces and 60"W for 1 9 16" surfaces require additional support. Extended U-top, corner, and straight worksurfaces Corner and straight worksurfaces LEGEND = Flat Brackets = Pedestal = Support Panel = Freestanding Support = Modesty Panel = Leg Kimball Office Systems Page 345 Worksurfaces
Worksurfaces & Support Application Guidelines Freestanding Worksurfaces, continued Product Information page 337 Typical Freestanding Configurations: Modesty panel Lateral file Support panels Modesty panel Pedestal Support panel Modesty panel Support panels Modesty panel Pedestals Modesty panel Support panels Modesty panel Pedestals Modesty panel Pedestal Support panel Metal Support Metal modesty panels attach 4" inset from the approach side of the pedestal or support panel. Wire management is achieved via a 1 1 2" space between the top of the modesty panel and the underside of the surface as well as a 3" gap from the bottom of the modesty panel to the floor. Pedestal non-deface kit allows attachment of metal modesty panel to metal pedestals without drilling holes in the sides. End panels are used to support work surfaces in freestanding applications. They are equipped with adjustable leveling glides that provide 1" of adjustment for aligning worksurfaces. They are designed to secure metal modesty panels. 8" return support can be used as support for corner surfaces or as additional support for 24"D worksurfaces that exceed the recommended kneespace. 8"D support panels cannot support any worksurface deeper than 24". They are equipped with one leveling glide that provides 1" of adjustment for aligning worksurfaces. Corner posts are used to create freestanding corner units. They are equipped with one leveling glide that provides 1" of adjustment for aligning worksurfaces. They are designed to secure metal modesty panels. Filler strip is used if a metal modesty panel is not specified. It maintains space for cable routing behind the pedestal and fills the 1 1 8" difference in depth for wood or laminate applications. Flat brackets are used to align and secure two perpendicular or end-toend worksurfaces. Drop brackets are used to attach adjacent surfaces at varying heights. They provide a 2" height change. Metal Support Common Applications: 8"D support panel applies to 24"D (return) worksurface. 7"D corner post applies to freestanding corner surfaces. 12"D support panel applies to any depth corner worksurface, providing it is bracketed to adjacent unit, and 30"D (return) worksurface, providing additional support is used to match surface depth. 18"D half end panel applies to any depth corner worksurface. 18"D undersurface lateral file applies to any depth worksurface, providing full end panel is included to match surface depth. 24"D pedestal and full end panel apply to 24"D or 30"D worksurfaces. Support panels Corner support Modesty panels Support panel Corner support Modesty panels Pedestal 30"D pedestal and full end panel apply to 30"D or 36"D worksurfaces. 36"D full end panel applies to 36"D worksurfaces. Kimball Office Systems Page 346
Worksurfaces & Support To determine the metal modesty panel width, subtract the total nominal width of support (pedestal and or end panel) from the nominal worksurface width. Example: 60"W worksurface 30"W support (2 pedestals) = 30"W modesty panel For planning purposes, the chart at right uses the term support panel to refer to full support panels, return support panels, and worksurface support panels since all are nominally 1" wide. Support depth underneath the left and right side of the worksurface must be equal unless the unit is secured to an adjacent, freestanding unit such as a return. Application Guidelines Freestanding Worksurfaces, continued Support and Modesty Panel Dimensions for Metal Support Modesty Worksurface Support Support Panel Width & Type Type Width(s) Width(s) 36" Corner * 2 Support Panels, 1 Corner Post 12"/12" 24"/24" 36" Straight 1 Ped., 1 Support Panel 16" 20" 36" Straight 2 Support Panels 2" 34" 42" Corner 2 Support Panels, 1 Corner Post 12"/12" 30"/30" 42"/48" Corner 2 Support Panels, 1 Corner Post 12"/12" 30"/36" 42"/60" Corner 2 Support Panels, 1 Corner Post 12"/12" 30"/48" 42"/60" Corner 1 Support Panel, 1 Ped., 12"/26" 30"/34" 1 Corner Post 42" Straight 1 Ped., 1 Support Panel 16" 26" 42" Straight 2 Support Panels 2" 40" 48" Corner 2 Support Panels, 1 Corner Post 12"/12" 36"/36" 48"/42" Corner 2 Support Panels, 1 Corner Post 12"/12" 36"/30" 48"/60" Corner 2 Support Panels, 1 Corner Post 12"/12" 36"/48 48"/60" Corner 1 Support Panel, 1 Ped., 12"/26" 36"/34" 1 Corner Post 48" Straight 1 Ped., 1 Support Panel 16" 32" 48" Straight 2 Support Panels 2" 46" 54" Straight 2 Peds. 30" 24" 54" Straight 1 Ped., 1 Support Panel 16" 38" 54" Straight 2 Support Panels 2" 52" 60" Corner 2 Support Panels, 1 Corner Post 12"/12" 48"/48" 60" Corner 1 Support Panel, 1 Ped., 12"/26" 48"/34" 1 Corner Post 60" Corner 2 Peds., 1 Corner Post 26"/26" 34"/34" 60"/42" Corner 2 Support Panels, 1 Corner Post 12"/12" 48"/30" 60"/48" Corner 2 Support Panels, 1 Corner Post 12"/12" 48"/36" 60"/42" Corner 1 Support Panel, 1 Ped., 26"/12" 34"/30" 1 Corner Post Product Information page 337 Modesty Worksurface Support Support Panel Width & Type Type Width(s) Width(s) 60"/48" Corner 1 Support Panel, 1 Ped., 26"/12" 34"/36" 1 Corner Post 60" Straight 2 Peds. 30" 30" 60" Straight 1 Ped., 1 Support Panel 16" 44" 60" Straight 2 Support Panels 2" 58" 66" Straight 2 Peds. 30" 36" 66" Straight 1 Ped., 1 Support Panel 16" 50" 66" Straight 2 Support Panels 2" 64" 72" Straight, Arc 2 Peds. 30" 42" 72 " Straight, Arc 1 Ped., 1 Support Panel 16" 56" 72 " Straight, Arc 2 Support Panels 2" 70" 84" Straight 2 Peds. 30" 54" 84 " Straight 1 Ped., 1 Support Panel 16" 68" 84 " Straight 2 Support Panels 2" 82" 90" Straight 2 Peds. 30" 60" 90 " Straight 1 Ped., 1 Support Panel 16" 74" 90 " Straight 2 Support Panels 2" 88" 96" Straight 2 Peds. 30" 66 96" Straight 1 Ped., 1 Support Panel 16" 80" 96" Straight 2 Support Panels 2" 94" Notes: * Freestanding corner units require 2 modesty panels. Corner Post is 7"W (nominal) and is inset 4" (actual); total of 11". When combined with the support panel (1"), support width is 12" (nominal). When combined with the pedestal (15"), support width is 26" (nominal). Unsupported surface span cannot exceed 48"W for 1 3 16" worksurfaces or 60"W for 1 9 16" worksurfaces. Kimball Office Systems Page 347 Worksurfaces
Worksurfaces & Support Application Guidelines Universal Supports See page Product Information page 337 Universal supports can be used in any panel-mounted, Traxx-mounted, or freestanding application. Support panel brackets and gusset brackets provide additional stability between a worksurface and support panel when the support panel is not attached to a panel. Adjustable column base provides 4" of adjustment. It is equipped with a glide. Decorative support leg includes glides and carpet grippers. Inserts are specified separately. Static and adjustable-height mobile table legs are available for use with worksurfaces and table tops. Units using tapered leg, column leg, adjustable column base, or decorative support leg must be secured to an adjacent worksurface for stability. Cylinder and half-cylinder bases are available for use with table tops and worksurfaces. Table support bases include anti-tip weight. Adjustable base, X-base and T-base are available for use with table tops and worksurfaces. Bracketry and Support Guidelines for Universal Supports The illustration below shows a variety of worksurface configurations and support options. Please use these examples to aid you in specifying appropriate support for specific applications. Note: Worksurface spans greater than 48"W for 1 3 16" surfaces and 60"W for 1 9 16" surfaces require additional support. Metal modesty panel can be secured to decorative support leg and or gusset bracket on either end. Gusset bracket must be specified separately. Note: Review support recommendations on the pricing pages when specifying tops and support for table use. LEGEND Panel Worksurface Bracket Cantilever Flat Bracket Support Panel Traxx Worksurface Bracket Freestanding Support Support Panel Bracket Kimball Office Systems Page 348
Worksurfaces & Support Application Guidelines Desking Configuration Thought Starters Product Information page 337 Desking configurations can be created using spine walls or Traxx, and for freestanding and mobile applications. Spine Wall Freestanding & Mobile Traxx Mounted Freestanding Metal Mobile Kimball Office Systems Page 349 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 W Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. D 24"D Straight Worksurfaces 1 3 16" Wire Manager Rim Profiles: Sloped (S) Plastic (P) Softened (F) = Kwik Office model available. See the Kwik Office Price List. Laminate with Thermofoil Laminate Wood Rim Wood D W H Model (T) (L) (LW) (W) 23 7 8" 23 7 8" 1 3 16" SS2424WSS $ 212 $ 340 $ 361 29 7 8" SS2430WSS $ 212 229 366 386 35 7 8" SS2436WSS 220 239 404 430 41 7 8" SS2442WSS 236 260 443 467 47 7 8" SS2448WSS 262 287 450 510 53 7 8" SS2454WSS 302 330 489 546 59 7 8" SS2460WSS 317 345 557 592 65 7 8" SS2466WSS 361 393 597 627 71 7 8" SS2472WSS 372 407 631 670 77 7 8" SS2478WSS 438 478 676 713 83 7 8" SS2484WSS 470 514 718 757 89 7 8" SS2490WSS 499 545 760 802 95 7 8" SS2496WSS 534 582 802 842 101 7 8" SS24102WSS 641 840 889 107 7 8" SS24108WSS 678 884 934 113 7 8" SS24114WSS 716 940 1049 119 7 8" SS24120WSS 752 968 1121 Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 5 SS2430WSSLW3 F STD 6 7 8 9 480 STD MC 480 Kimball Office Systems Page 350
Worksurfaces & Support GSA SIN 711-1 W Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D 24"D Straight Worksurfaces 1 3 16" Single Rim Laminate with Laminate Wood Rim Wood D W H Model (L) (LW) (W) 23 7 8" 23 7 8" 1 3 16" SS2424WSS $ 223 $ 466 $ 423 29 7 8" SS2430WSS 241 502 453 35 7 8" SS2436WSS 269 529 479 41 7 8" SS2442WSS 306 563 508 47 7 8" SS2448WSS 341 604 552 53 7 8" SS2454WSS 381 668 601 59 7 8" SS2460WSS 414 697 632 65 7 8" SS2466WSS 480 758 687 71 7 8" SS2472WSS 494 787 712 77 7 8" SS2478WSS 535 824 748 83 7 8" SS2484WSS 574 888 804 89 7 8" SS2490WSS 613 929 837 95 7 8" SS2496WSS 653 992 894 101 7 8" SS24102WSS 740 1093 991 107 7 8" SS24108WSS 769 1118 1011 113 7 8" SS24114WSS 804 1158 1059 119 7 8" SS24120WSS 838 1190 1135 Rim Profiles: Plastic (P) Softened (F) Kimball Office Systems Page 351 Worksurfaces Brackets & Support page 436 IMPORTANT: Brackets must be specified separately. Side and back edges are finished to match front rim. LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 5 6 SS2424WSSLW1 F STD 480 7 8 STD MC
Worksurfaces & Support GSA SIN 711-1 W Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D 24"D Straight Worksurfaces 1 3 16" Double Rim Laminate D W H Model (L) 23 7 8" 35 7 8" 1 3 16" SS2436WSS $ 399 41 7 8" SS2442WSS 414 47 7 8" SS2448WSS 440 53 7 8" SS2454WSS 482 59 7 8" SS2460WSS 497 65 7 8" SS2466WSS 541 71 7 8" SS2472WSS 555 77 7 8" SS2478WSS 665 83 7 8" SS2484WSS 726 89 7 8" SS2490WSS 782 95 7 8" SS2496WSS 858 = Kwik Office model available. See the Kwik Office Price List. IMPORTANT: Brackets must be specified separately. Side edges are finished to match the front and back rims. 3 Rim option: 2 = Double rim 4 Rim profile: P = Plastic rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish designator Brackets & Support page 436 1 23 4 5 6 SS2436WSSL2 P STD 480 7 480 Rim Profiles: Plastic (P) Kimball Office Systems Page 352
Worksurfaces & Support GSA SIN 711-1 W Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. D 30"D Straight Worksurfaces 1 3 16" Wire Manager Laminate with Thermofoil Laminate Wood Rim Wood D W H Model (T) (L) (LW) (W) 29 7 8" 23 7 8" 1 3 16" SS3024WSS $ 216 $ 387 $ 424 29 7 8" SS3030WSS $ 215 234 418 454 35 7 8" SS3036WSS 238 262 464 503 41 7 8" SS3042WSS 244 268 513 555 47 7 8" SS3048WSS 274 300 558 599 53 7 8" SS3054WSS 331 362 632 655 59 7 8" SS3060WSS 341 372 653 699 65 7 8" SS3066WSS 387 423 700 750 71 7 8" SS3072WSS 422 461 750 794 77 7 8" SS3078WSS 519 567 795 847 83 7 8" SS3084WSS 555 605 847 901 89 7 8" SS3090WSS 595 649 900 954 95 7 8" SS3096WSS 632 692 946 1006 101 7 8" SS30102WSS 759 1002 1055 107 7 8" SS30108WSS 806 1051 1118 113 7 8" SS30114WSS 866 1112 1189 119 7 8" SS30120WSS 893 1150 1214 Rim Profiles: Sloped (S) Plastic (P) Softened (F) = Kwik Office model available. See the Kwik Office Price List. Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 5 6 SS3030WSSLW3 F STD 480 7 8 9 STD MC 480 Kimball Office Systems Page 353 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 W Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D 30"D Straight Worksurfaces 1 3 16" Single Rim Laminate with Laminate Wood Rim Wood D W H Model (L) (LW) (W) 29 7 8" 23 7 8" 1 3 16" SS3024WSS $ 252 $ 502 $ 458 29 7 8" SS3030WSS 270 540 491 35 7 8" SS3036WSS 313 576 521 41 7 8" SS3042WSS 355 619 561 47 7 8" SS3048WSS 405 668 609 53 7 8" SS3054WSS 449 736 669 59 7 8" SS3060WSS 489 774 709 65 7 8" SS3066WSS 563 848 769 71 7 8" SS3072WSS 582 877 806 77 7 8" SS3078WSS 626 921 858 83 7 8" SS3084WSS 673 996 913 89 7 8" SS3090WSS 718 1037 967 95 7 8" SS3096WSS 763 1104 1015 101 7 8" SS30102WSS 839 1201 1088 107 7 8" SS30108WSS 894 1256 1136 113 7 8" SS30114WSS 938 1302 1216 119 7 8" SS30120WSS 979 1341 1273 Rim Profiles: Plastic (P) Softened (F) Kimball Office Systems Page 354 Brackets & Support page 436 IMPORTANT: Brackets must be specified separately. Side and back edges are finished to match front rim. LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 5 6 SS3030WSSLW1 F STD 480 7 8 STD MC
Worksurfaces & Support GSA SIN 711-1 W Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D 30"D Straight Worksurfaces 1 3 16" Double Rim Laminate with Laminate Wood Rim Wood D W H Model (L) (LW) (W) 29 7 8" 35 7 8" 1 3 16" SS3036WSS $ 417 41 7 8" SS3042WSS 426 47 7 8" SS3048WSS 453 53 7 8" SS3054WSS 509 59 7 8" SS3060WSS 521 $ 806 $ 728 65 7 8" SS3066WSS 569 872 789 71 7 8" SS3072WSS 596 909 859 77 7 8" SS3078WSS 645 950 874 83 7 8" SS3084WSS 694 1034 931 89 7 8" SS3090WSS 731 1076 1023 95 7 8" SS3096WSS 781 1156 1043 101 7 8" SS30102WSS 859 1273 1108 107 7 8" SS30108WSS 916 1326 1213 113 7 8" SS30114WSS 959 1375 1295 119 7 8" SS30120WSS 1000 1414 1344 Rim Profiles: Plastic (P) Softened (F) = Kwik Office model available. See the Kwik Office Price List. Kimball Office Systems Page 355 Worksurfaces Brackets & Support page 436 IMPORTANT: Brackets must be specified separately. Side edges are finished to match the front and back rims. LW = Laminate with wood rim W = Wood 3 Rim option: 2 = Double rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 5 6 SS3060WSSLW2 F STD 480 7 8 STD MC
Worksurfaces & Support GSA SIN 711-1 W Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D 36"D Straight Worksurfaces 1 3 16" Double Rim Laminate with Laminate Wood Rim Wood D W H Model (L) (LW) (W) 35 7 8" 59 7 8" 1 3 16" SS3660WSS $ 561 $ 881 $ 795 65 7 8" SS3666WSS 645 956 867 71 7 8" SS3672WSS 653 996 898 77 7 8" SS3678WSS 718 1043 1000 83 7 8" SS3684WSS 773 1151 1084 89 7 8" SS3690WSS 821 1200 1190 95 7 8" SS3696WSS 874 1334 1213 101 7 8" SS36102WSS 962 1463 1290 107 7 8" SS36108WSS 1025 1524 1378 113 7 8" SS36114WSS 1076 1580 1509 119 7 8" SS36120WSS 1124 1629 1562 Rim Profiles: Plastic (P) Softened (F) = Kwik Office model available. See the Kwik Office Price List. Kimball Office Systems Page 356 Brackets & Support page 436 IMPORTANT: Brackets must be specified separately. Side edges are finished to match the front and back rims. LW = Laminate with wood rim W = Wood 3 Rim option: 2 = Double rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 5 6 SS3660WSSLW2 F STD 480 7 8 STD MC
Worksurfaces & Support GSA SIN 711-1 W Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Arc worksurfaces are 30"D on the ends and 36"D in the center. Side edges are finished to match the front and back rims. D Arc Worksurfaces 1 3 16" Double Rim Laminate with Thermofoil Laminate Wood Rim Wood D W H Model (T) (L) (LW) (W) 29 7 8" 71 7 8" 1 3 16" SS3672WSA $ 761 $ 829 $ 1180 $ 1067 77 7 8" SS3678WSA 809 883 1227 1180 83 7 8" SS3684WSA 859 937 1335 1262 89 7 8" SS3690WSA 902 985 1465 1372 95 7 8" SS3696WSA 952 1038 1523 1390 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 2 = Double rim 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 5 6 SS3672WSALW2 F STD 480 7 8 STD MC Kimball Office Systems Page 357 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 D W Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Mobile undersurface storage units are recommended for use with wedge worksurfaces. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. Right-Hand Wedge Worksurfaces 1 3 16" Wire Manager Laminate with Laminate Wood Rim Wood D W H Model (L) (LW) (W) 23 7 8" 41 7 8" 1 3 16" SS2442WSW $ 506 $ 753 $ 678 47 7 8" SS2448WSW 548 794 718 53 7 8" SS2454WSW 599 864 782 59 7 8" SS2460WSW 640 896 811 65 7 8" SS2466WSW 712 964 876 71 7 8" SS2472WSW 730 992 899 29 7 8" 41 7 8" SS3042WSW 543 834 755 47 7 8" SS3048WSW 593 884 797 53 7 8" SS3054WSW 645 958 868 59 7 8" SS3060WSW 685 996 900 65 7 8" SS3066WSW 768 1073 974 71 7 8" SS3072WSW 784 1104 996 Rim Profiles: Plastic (P) Softened (F) Dimensions for Space Planning: Kimball Office Systems Page 358 6" 30" on 24"D worksurface 36" on 30"D worksurface Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 5 6 SS2442WSWLW3 F STD 480 7 8 9 STD MC 480
Worksurfaces & Support GSA SIN 711-1 D W Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Mobile undersurface storage units are recommended for use with wedge worksurfaces. Side and back edges are finished to match front rim. Right-Hand Wedge Worksurfaces 1 3 16" Single Rim Laminate with Thermofoil Laminate Wood Rim Wood D W H Model (T) (L) (LW) (W) 23 7 8" 41 7 8" 1 3 16" SS2442WSW $ 433 $ 526 $ 794 $ 719 47 7 8" SS2448WSW 471 570 840 760 53 7 8" SS2454WSW 513 622 914 827 59 7 8" SS2460WSW 547 665 948 858 65 7 8" SS2466WSW 609 740 1023 929 71 7 8" SS2472WSW 625 758 1051 948 29 7 8" 41 7 8" SS3042WSW 464 564 883 796 47 7 8" SS3048WSW 505 615 936 842 53 7 8" SS3054WSW 552 670 1015 918 59 7 8" SS3060WSW 587 713 1056 953 65 7 8" SS3066WSW 755 795 1136 1030 71 7 8" SS3072WSW 780 815 1167 1057 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Dimensions for Space Planning: 6" 30" on 24"D worksurface 36" on 30"D worksurface Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 5 6 SS2442WSWLW1 F STD 480 7 8 STD MC Kimball Office Systems Page 359 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 W Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Mobile undersurface storage units are recommended for use with wedge worksurfaces. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. D Left-Hand Wedge Worksurfaces 1 3 16" Wire Manager Laminate with Laminate Wood Rim Wood D W H Model (L) (LW) (W) 23 7 8" 41 7 8" 1 3 16" SS4224WSW $ 506 $ 753 $ 678 47 7 8" SS4824WSW 548 794 718 53 7 8" SS5424WSW 599 864 782 59 7 8" SS6024WSW 640 896 811 65 7 8" SS6624WSW 712 964 876 71 7 8" SS7224WSW 730 992 899 29 7 8" 41 7 8" SS4230WSW 543 834 755 47 7 8" SS4830WSW 593 884 797 53 7 8" SS5430WSW 645 958 868 59 7 8" SS6030WSW 685 996 900 65 7 8" SS6630WSW 768 1073 974 71 7 8" SS7230WSW 784 1104 996 Rim Profiles: Plastic (P) Softened (F) Dimensions for Space Planning: 6" 30" on 24"D worksurface 36" on 30"D worksurface Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 5 6 SS4224WSWLW3 F STD 480 7 8 9 STD MC 480 Kimball Office Systems Page 360
Worksurfaces & Support GSA SIN 711-1 W Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Mobile undersurface storage units are recommended for use with wedge worksurfaces. Side and back edges are finished to match front rim. D Left-Hand Wedge Worksurfaces 1 3 16" Single Rim Laminate with Thermofoil Laminate Wood Rim Wood D W H Model (T) (L) (LW) (W) 23 7 8" 41 7 8" 1 3 16" SS4224WSW $ 433 $ 526 $ 794 $ 719 47 7 8" SS4824WSW 471 570 840 760 53 7 8" SS5424WSW 513 622 914 827 59 7 8" SS6024WSW 547 665 948 858 65 7 8" SS6624WSW 609 740 1023 929 71 7 8" SS7224WSW 625 758 1051 948 29 7 8" 41 7 8" SS4230WSW 464 564 883 796 47 7 8" SS4830WSW 505 615 936 842 53 7 8" SS5430WSW 552 670 1015 918 59 7 8" SS6030WSW 587 713 1056 953 65 7 8" SS6630WSW 755 795 1136 1030 71 7 8" SS7230WSW 780 815 1167 1057 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Dimensions for Space Planning: 6" 30" on 24"D worksurface 36" on 30"D worksurface Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 5 6 SS4224WSWLW1 F STD 480 7 8 STD MC Kimball Office Systems Page 361 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 A A Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Mobile undersurface storage units are recommended for use with serpentine worksurfaces. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. B B C C Serpentine Worksurfaces 1 3 16" Wire Manager Laminate with Thermofoil Laminate Wood Rim Wood A B C H Model (T) (L) (LW) (W) Right-Hand 23 7 8" 41 7 8" 29 7 8" 1 3 16" SS244230WST $ 374 $ 412 $ 639 $ 606 Left-Hand 47 7 8" SS244830WST 450 494 694 658 53 7 8" SS245430WST 472 518 787 752 59 7 8" SS246030WST 487 537 811 770 65 7 8" SS246630WST 525 575 868 828 71 7 8" SS247230WST 565 619 929 884 29 7 8" 41 7 8" 23 7 8" 1 3 16" SS304224WST $ 374 $ 412 $ 639 $ 606 47 7 8" SS304824WST 450 494 694 658 53 7 8" SS305424WST 472 518 787 752 59 7 8" SS306024WST 487 537 811 770 65 7 8" SS306624WST 525 575 868 828 71 7 8" SS307224WST 565 619 929 884 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Kimball Office Systems Page 362 Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 5 SS244230WSTLW3 F STD 6 7 8 9 480 STD MC 480
Worksurfaces & Support GSA SIN 711-1 A A B B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. C C Serpentine Worksurfaces 1 3 16" Single Rim Laminate with Laminate Wood Rim Wood A B C H Model (L) (LW) (W) Right-Hand 23 7 8" 41 7 8" 29 7 8" 1 3 16" SS244230WST $ 423 $ 770 $ 730 Left-Hand 47 7 8" SS244830WST 478 827 788 53 7 8" SS245430WST 532 915 872 59 7 8" SS246030WST 580 959 914 65 7 8" SS246630WST 667 1055 1005 71 7 8" SS247230WST 687 1089 1036 29 7 8" 41 7 8" 23 7 8" 1 3 16" SS304224WST $ 423 $ 770 $ 730 47 7 8" SS304824WST 478 827 788 53 7 8" SS305424WST 532 915 872 59 7 8" SS306024WST 580 959 914 65 7 8" SS306624WST 667 1055 1005 71 7 8" SS307224WST 687 1089 1036 Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) IMPORTANT: Brackets must be specified separately. Mobile undersurface storage units are recommended for use with serpentine worksurfaces. Side and back edges are finished to match front rim. Rim Profiles: Plastic (P) Softened (F) 1 23 4 5 SS244230WSTLW1 F STD 6 7 8 480 STD MC Kimball Office Systems Page 363 Worksurfaces
= Kwik Office model available. Worksurfaces & Support See the Kwik Office Price List. GSA SIN 711-1 A A Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. C C Related Products: Keyboard adjusters See the Perks Price List. B B E E D D Straight Corner Worksurfaces 1 3 16" Wire Manager Laminate A B C D E H Model (L) Straight 24"/24" Return Combo 35 7 8" 35 7 8" 23 7 8" 23 7 8" 17 1 8" 1 3 16" SS24363624WSCS $ 389 41 7 8" 41 7 8" 25 5 8" SS24424224WSCS 404 47 7 8" 47 7 8" 34 1 8" SS24484824WSCS 438 30"/30" Return Combo 41 7 8" 41 7 8" 29 7 8" 29 7 8" 17 1 8" 1 3 16" SS30424230WSCS $ 485 47 7 8" 47 7 8" 25 5 8" SS30484830WSCS 546 Straight Adjustable Split 24"/24" Return Combo 41 7 8" 41 7 8" 23 7 8" 23 7 8" 23 5 8" 1 3 16" SS24424224WSCSS $ 854 47 7 8" 47 7 8" 32 1 8" SS24484824WSCSS 887 Rim Profiles: Plastic (P) Brackets & Support page 436 IMPORTANT: Brackets must be specified separately. Side edges are finished to match the front rim. Return combo dimensions are determined from left to right when seated at the worksurface Grain direction runs parallel to the user s edge. IMPORTANT: Keyboard adjuster must be specified separately for split worksurface. 3 Rim option: 3 = Wire manager 4 Rim profile: P = Plastic rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish designator 8 Wire manager finish designator 1 23 4 SS24363624WSCSL3 P 5 6 7 8 STD 480 480 480 Kimball Office Systems Page 364
= Kwik Office model available. Worksurfaces & Support See the Kwik Office Price List. GSA SIN 711-1 A A C C Note: Bold lines indicates location of rim detail. Arrow on surface indicates grain direction. Related Products: Keyboard adjusters See the Perks Price List. B B E E D D Straight Corner Worksurfaces 1 3 16" Double Rim Laminate A B C D E H Model (L) Straight 24"/24" Return Combo 35 7 8" 35 7 8" 23 7 8" 23 7 8" 17 1 8" 1 3 16" SS24363624WSCS $ 537 41 7 8" 41 7 8" 25 5 8" SS24424224WSCS 552 47 7 8" 47 7 8" 34 1 8" SS24484824WSCS 583 30"/30" Return Combo 41 7 8" 41 7 8" 29 7 8" 29 7 8" 17 1 8" 1 3 16" SS30424230WSCS $ 625 47 7 8" 47 7 8" 25 5 8" SS30484830WSCS 684 Straight Adjustable Split 24"/24" Return Combo 41 7 8" 41 7 8" 23 7 8" 23 7 8" 23 5 8" 1 3 16" SS24424224WSCSS $ 796 47 7 8" 47 7 8" 32 1 8" SS24484824WSCSS 829 Rim Profiles: Plastic (P) Kimball Office Systems Page 365 Worksurfaces IMPORTANT: Brackets must be specified separately. Side edges are finished to match the front rim. Return combo dimensions are determined from left to right when seated at the worksurface. Freestanding corner worksurfaces require half end panels for undersurface support. Return support panels can also be used if the unit is secured to adjacent units with flat brackets. Grain direction runs parallel to the user s edge. IMPORTANT: Keyboard adjuster must be specified separately for split worksurface. 3 Rim option: 2 = Double rim 4 Rim profile: P = Plastic rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish designator Brackets & Support page 436 1 23 4 SS24363624WSCSL2 P 5 6 7 STD 480 480
= Kwik Office model available. Worksurfaces & Support See the Kwik Office Price List. GSA SIN 711-1 A IMPORTANT: Brackets must be specified separately. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. Return combo dimensions are determined from left to right when seated at the worksurface Woodgrain laminates cannot be applied to 60" x 60" curved corner worksurfaces. C Note: Bold line indicates location of rim detail; double line indicates location of wire manager. B D Curved Corner Worksurfaces 1 3 16" Wire Manager 24"/24" Return Combos Laminate with Thermofoil Laminate Wood Rim Wood A B C D H Model (T) (L) (LW) (W) 35 7 8" 35 7 8" 23 7 8" 23 7 8" 1 3 16" SS24363624WSCC $ 379 $ 415 $ 849 $ 840 41 7 8" 41 7 8" SS24424224WSCC 395 433 911 895 47 7 8" SS24424824WSCC 513 59 7 8" SS24426024WSCC 649 47 7 8" 41 7 8" SS24484224WSCC 513 47 7 8" SS24484824WSCC 427 466 912 1028 59 7 8" SS24486024WSCC 617 673 1293 1286 59 7 8" 41 7 8" SS24604224WSCC 649 47 7 8" SS24604824WSCC 617 673 1293 1286 59 7 8" SS24606024WSCC 913 Grain Direction: Symmetrical (except 48" thermofoil) Rim Profiles: 48 48 Symmetrical 48" thermofoil Right-hand Sloped (S) Plastic (P) Softened (F) Left-hand Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 SS24363624WSCCLW3 F 5 6 7 8 9 STD 480 STD MC 480 Kimball Office Systems Page 366
= Kwik Office model available. Worksurfaces & Support See the Kwik Office Price List. GSA SIN 711-1 A Note: Bold line indicates location of rim detail; double line indicates location of wire manager. C IMPORTANT: Brackets must be specified separately. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. Return combo dimensions are determined from left to right when seated at the worksurface Woodgrain laminates cannot be applied to 60" x 60" curved corner worksurfaces. B D Curved Corner Worksurfaces 1 3 16" Wire Manager 30"/30" Return Combos Laminate with Thermofoil Laminate Wood Rim Wood A B C D H Model (T) (L) (LW) (W) 41 7 8" 41 7 8" 29 7 8" 29 7 8" 1 3 16" SS30424230WSCC $ 518 47 7 8" 47 7 8" SS30484830WSCC $ 537 586 912 1028 59 7 8" SS30486030WSCC 695 758 1293 1286 59 7 8" 47 7 8" SS30604830WSCC 695 758 1293 1286 59 7 8" SS30606030WSCC 958 Grain Direction: Symmetrical (except 48" thermofoil) Rim Profiles: 48 48 Symmetrical 48" thermofoil Right-hand Sloped (S) Plastic (P) Softened (F) Left-hand Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 SS30424230WSCCL3 F 5 6 7 8 9 STD 480 STD MC 480 Kimball Office Systems Page 367 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 A IMPORTANT: Brackets must be specified separately. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. Return combo dimensions are determined from left to right when seated at the worksurface Woodgrain laminates cannot be applied to 60" x 60" curved corner worksurfaces. C Note: Bold line indicates location of rim detail; double line indicates location of wire manager. B D Curved Corner Worksurfaces 1 3 16" Wire Manager 24"/30" Return Combos Laminate with Thermofoil Laminate Wood Rim Wood A B C D H Model (T) (L) (LW) (W) 47 7 8" 41 7 8" 23 7 8" 29 7 8" 1 3 16" SS24484230WSCC $ 573 47 7 8" SS24484830WSCC $ 539 590 $ 912 $ 1028 59 7 8" SS24486030WSCC 668 729 1293 1286 59 7 8" 41 7 8" SS24604230WSCC 694 47 7 8" SS24604830WSCC 668 729 1293 1286 59 7 8" SS24606030WSCC 1033 Grain Direction: Symmetrical (except 48" thermofoil) Rim Profiles: 48 30 30 30 48 24 24 24 24 Symmetrical 48" thermofoil Right-hand Sloped (S) Plastic (P) Softened (F) 30 Left-hand Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 SS24484830WSCCLW3 F 5 6 7 8 9 STD 480 STD MC 480 Kimball Office Systems Page 368
Worksurfaces & Support GSA SIN 711-1 A Note: Bold line indicates location of rim detail; double line indicates location of wire manager. C IMPORTANT: Brackets must be specified separately. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. Return combo dimensions are determined from left to right when seated at the worksurface Woodgrain laminates cannot be applied to 60" x 60" curved corner worksurfaces. B D Curved Corner Worksurfaces 1 3 16" Wire Manager 30"/24" Return Combos Laminate with Thermofoil Laminate Wood Rim Wood A B C D H Model (T) (L) (LW) (W) 41 7 8" 47 7 8" 29 7 8" 23 7 8" 1 3 16" SS30424824WSCC $ 573 59 7 8" SS30426024WSCC 694 47 7 8" 47 7 8" SS30484824WSCC $ 539 590 $ 912 $ 1028 59 7 8" SS30486024WSCC 668 729 1293 1286 59 7 8" 47 7 8" SS30604824WSCC 668 729 1293 1286 59 7 8" SS30606024WSCC 1033 Grain Direction: Symmetrical (except 48" thermofoil) Rim Profiles: 48 24 48 24 24 30 30 30 30 Symmetrical 48" thermofoil Right-hand Sloped (S) Plastic (P) Softened (F) 24 Left-hand Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 SS30424824WSCCLW3 F 5 6 7 8 9 STD 480 STD MC 480 Kimball Office Systems Page 369 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 A IMPORTANT: Brackets must be specified separately. Side and back edges are finished to match front rim. Return combo dimensions are determined from left to right when seated at the worksurface. C B Note: Bold line indicates location of rim detail. D Curved Corner Worksurfaces 1 3 16" Single Rim Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 24"/24" Return Combo 35 7 8" 35 7 8" 23 7 8" 23 7 8" 1 3 16" SS24363624WSCC $ 595 $ 1049 $ 860 41 7 8" 41 7 8" SS24424224WSCC 651 1110 913 47 7 8" 47 7 8" SS24484824WSCC 772 1133 1030 47 7 8" 59 7 8" SS24486024WSCC 997 1410 1297 59 7 8" 47 7 8" SS24604824WSCC 997 1410 1297 30"/30" Return Combo 47 7 8" 47 7 8" 29 7 8" 29 7 8" 1 3 16" SS30484830WSCC $ 772 $ 1133 $ 1030 47 7 8" 59 7 8" SS30486030WSCC 997 1410 1297 59 7 8" 47 7 8" SS30604830WSCC 997 1410 1297 24"/30" Return Combo 47 7 8" 47 7 8" 23 7 8" 29 7 8" 1 3 16" SS24484830WSCC $ 772 $ 1133 $ 1030 47 7 8" 59 7 8" SS24486030WSCC 997 1410 1297 59 7 8" 47 7 8" SS24604830WSCC 997 1410 1297 30"/24" Return Combo 47 7 8" 47 7 8" 29 7 8" 23 7 8" 1 3 16" SS30484824WSCC $ 772 $ 1133 $ 1030 47 7 8" 59 7 8" SS30486024WSCC 997 1410 1297 59 7 8" 47 7 8" SS30604824WSCC 997 1410 1297 Grain Direction: Symmetrical Right-hand Left-hand Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS24363624WSCCLW1 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 370
= Kwik Office model available. Worksurfaces & Support See the Kwik Office Price List. GSA SIN 711-1 A C IMPORTANT: Brackets must be specified separately. Side and back edges are finished to match front and back rim. Return combo dimensions are determined from left to right when seated at the worksurface Corner worksurfaces require half end panels for undersurface support. Return support panels can also be used if unit is secured to adjacent units with flat brackets. Woodgrain laminates cannot be applied to 60" x 60" curved corner worksurfaces. B Note: Bold line indicates location of rim detail. D Curved Corner Worksurfaces 1 3 16" Double Rim 24"/24" and 30"/30" Return Combos Laminate A B C D H Model (L) 24"/24" Return Combo 35 7 8" 35 7 8" 23 7 8" 23 7 8" 1 3 16" SS24363624WSCC $ 562 41 7 8" 41 7 8" SS24424224WSCC 576 47 7 8" SS24424824WSCC 652 59 7 8" SS24426024WSCC 780 47 7 8" 41 7 8" SS24484224WSCC 652 47 7 8" SS24484824WSCC 609 59 7 8" SS24486024WSCC 804 59 7 8" 41 7 8" SS24604224WSCC 780 47 7 8" SS24604824WSCC 804 59 7 8" SS24606024WSCC 1028 30"/30" Return Combo 41 7 8" 41 7 8" 29 7 8" 29 7 8" 1 3 16" SS30424230WSCC $ 658 47 7 8" 47 7 8" SS30484830WSCC 721 59 7 8" SS30486030WSCC 883 59 7 8" 47 7 8" SS30604830WSCC 883 59 7 8" SS30606030WSCC 1067 Grain Direction: Symmetrical Right-hand Left-hand Rim Profiles: Plastic (P) 3 Rim option: 2 = Double rim 4 Rim profile: P = Plastic rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish designator Brackets & Support page 436 1 23 4 SS24363624WSCCL2 P 5 6 7 STD 480 480 Kimball Office Systems Page 371 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 A C B Note: Bold line indicates location of rim detail. IMPORTANT: Brackets must be specified separately. Side and back edges are finished to match front and back rim. Return combo dimensions are determined from left to right when seated at the worksurface Corner worksurfaces require half end panels for undersurface support. Return support panels can also be used if unit is secured to adjacent units with flat brackets. Woodgrain laminates cannot be applied to 60" x 60" curved corner worksurfaces. D Curved Corner Worksurfaces 1 3 16" Double Rim 24"/30" and 30"/24" Return Combos Laminate A B C D H Model (L) 24"/30" Return Combo 47 7 8" 41 7 8" 23 7 8" 29 7 8" 1 3 16" SS24484230WSCC $ 709 47 7 8" SS24484830WSCC 723 59 7 8" SS24486030WSCC 854 59 7 8" 41 7 8" 23 7 8" 29 7 8" 1 3 16" SS24604230WSCC 821 47 7 8" SS24604830WSCC 854 59 7 8" SS24606030WSCC 1138 30"/24" Return Combo 41 7 8" 47 7 8" 29 7 8" 23 7 8" 1 3 16" SS30424824WSCC $ 652 59 7 8" SS30426024WSCC 821 47 7 8" 47 7 8" SS30484824WSCC 723 59 7 8" SS30486024WSCC 854 59 7 8" 47 7 8" SS30604824WSCC 854 59 7 8" SS30606024WSCC 1138 Grain Direction: Symmetrical Right-hand Left-hand Rim Profiles: Plastic (P) 3 Rim option: 2 = Double rim 4 Rim profile: P = Plastic rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish designator Brackets & Support page 436 1 23 4 SS24484230WSCCL2 P 5 6 7 STD 480 480 Kimball Office Systems Page 372
Worksurfaces & Support GSA SIN 711-1 A C Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Mobile undersurface storage units are recommended. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. Return combo dimensions are determined from left to right when seated at the worksurface. B D Right-Hand Serpentine Corner Worksurfaces 1 3 16" Wire Manager Laminate with Thermofoil Laminate Wood Rim Wood A B C D H Model (T) (L) (LW) (W) 24"/24" Return Combos 41 7 8" 59 7 8" 23 7 8" 23 7 8" 1 3 16" SS24426024WSTC $ 801 $ 914 $ 1132 $ 1128 47 7 8" SS24486024WSTC 914 1047 1292 1288 30"/30" Return Combos 41 7 8" 59 7 8" 29 7 8" 29 7 8" 1 3 16" SS30426030WSTC $ 801 $ 914 $ 1132 $ 1128 47 7 8" SS30486030WSTC 914 1047 1292 1288 24"/30" Return Combos 41 7 8" 59 7 8" 23 7 8" 29 7 8" 1 3 16" SS24426030WSTC $ 801 $ 914 $ 1132 $ 1128 47 7 8" SS24486030WSTC 914 1047 1292 1288 30"/24" Return Combos 41 7 8" 59 7 8" 29 7 8" 23 7 8" 1 3 16" SS30426024WSTC $ 801 $ 914 $ 1132 $ 1128 47 7 8" SS30486024WSTC 914 1047 1292 1288 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Dimensions for Space Planning: Kimball Office Systems Page 373 21" 21" on 42"D worksurface 27" on 48"D worksurface IMPORTANT: If using support at the narrowest point of the surface, consider the depth of the support. Worksurfaces Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 SS24426024WSTCLW3 F 5 6 7 8 9 STD 480 STD MC 480
Worksurfaces & Support GSA SIN 711-1 A C Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Mobile undersurface storage units are recommended for use with serpentine corner worksurfaces. Side and back edges are finished to match front rim. Return combo dimensions are determined from left to right when seated at the worksurface. B D Right-Hand Serpentine Corner Worksurfaces 1 3 16" Single Rim Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 24"/24" Return Combos 41 7 8" 59 7 8" 23 7 8" 23 7 8" 1 3 16" SS24426024WSTC $ 875 $ 1233 $ 1136 47 7 8" SS24486024WSTC 998 1410 1298 30"/30" Return Combos 41 7 8" 59 7 8" 29 7 8" 29 7 8" 1 3 16" SS30426030WSTC $ 875 $ 1233 $ 1136 47 7 8" SS30486030WSTC 998 1410 1298 24"/30" Return Combos 41 7 8" 59 7 8" 23 7 8" 29 7 8" 1 3 16" SS24426030WSTC $ 875 $ 1233 $ 1136 47 7 8" SS24486030WSTC 998 1410 1298 30"/24" Return Combos 41 7 8" 59 7 8" 29 7 8" 23 7 8" 1 3 16" SS30426024WSTC $ 875 $ 1233 $ 1136 47 7 8" SS30486024WSTC 998 1410 1298 Rim Profiles: Plastic (P) Softened (F) Dimensions for Space Planning: 21" 21" on 42"D worksurface 27" on 48"D worksurface IMPORTANT: If using support at the narrowest point of the surface, consider the depth of the support. Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 5 SS24426024WSTCLW1 F STD 6 7 8 480 STD MC Kimball Office Systems Page 374
Worksurfaces & Support GSA SIN 711-1 C Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Mobile undersurface storage units are recommended for use with serpentine corner worksurface. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. Return combo dimensions are determined from left to right when seated at the worksurface. B D A Left-Hand Serpentine Corner Worksurfaces 1 3 16" Wire Manager Laminate with Thermofoil Laminate Wood Rim Wood A B C D H Model (T) (L) (LW) (W) 24"/24" Return Combos 41 7 8" 59 7 8" 23 7 8" 23 7 8" 1 3 16" SS24604224WSTC $ 801 $ 914 $ 1132 $ 1128 47 7 8" SS24604824WSTC 914 1047 1292 1288 30"/30" Return Combos 41 7 8" 59 7 8" 29 7 8" 29 7 8" 1 3 16" SS30604230WSTC $ 801 $ 914 $ 1132 $ 1128 47 7 8" SS30604830WSTC 914 1047 1292 1288 24"/30" Return Combos 41 7 8" 59 7 8" 23 7 8" 29 7 8" 1 3 16" SS24604230WSTC $ 801 $ 914 $ 1132 $ 1128 47 7 8" SS24604830WSTC 914 1047 1292 1288 30"/24" Return Combos 41 7 8" 59 7 8" 29 7 8" 23 7 8" 1 3 16" SS30604224WSTC $ 801 $ 914 $ 1132 $ 1128 47 7 8" SS30604824WSTC 914 1047 1292 1288 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Dimensions for Space Planning: 21" 21" on 42"D worksurface 27" on 48"D worksurface IMPORTANT: If using support at the narrowest point of the surface, consider the depth of the support. Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 SS24604224WSTCLW3 F 5 6 7 8 9 STD 480 STD MC 480 Kimball Office Systems Page 375 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 C Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Mobile undersurface storage units are recommended for use with serpentine corner worksurfaces. Side and back edges are finished to match front rim. Return combo dimensions are determined from left to right when seated at the worksurface. B D A Left-Hand Serpentine Corner Worksurfaces 1 3 16" Single Rim Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 24"/24" Return Combos 41 7 8" 59 7 8" 23 7 8" 23 7 8" 1 3 16" SS24604224WSTC $ 875 $ 1233 $ 1136 47 7 8" SS24604824WSTC 998 1410 1298 30"/30" Return Combos 41 7 8" 59 7 8" 29 7 8" 29 7 8" 1 3 16" SS30604230WSTC $ 875 $ 1233 $ 1136 47 7 8" SS30604830WSTC 998 1410 1298 24"/30" Return Combos 41 7 8" 59 7 8" 23 7 8" 29 7 8" 1 3 16" SS24604230WSTC $ 875 $ 1233 $ 1136 47 7 8" SS24604830WSTC 998 1410 1298 30"/24" Return Combos 41 7 8" 59 7 8" 29 7 8" 23 7 8" 1 3 16" SS30604224WSTC $ 875 $ 1233 $ 1136 47 7 8" SS30604824WSTC 998 1410 1298 Rim Profiles: Plastic (P) Softened (F) Dimensions for Space Planning: Kimball Office Systems Page 376 21" 21" on 42"D worksurface 27" on 48"D worksurface IMPORTANT: If using support at the narrowest point of the surface, consider the depth of the support. Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 5 SS24604224WSTCLW1 F STD 6 7 8 480 STD MC
Worksurfaces & Support GSA SIN 711-1 C A B Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Dimensions shown are nominal. Actual dimensions vary slightly to correspond to the panel system specified. IMPORTANT: Brackets must be specified separately. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. Return combo dimensions are determined from left to right when seated at the worksurface D 120 Curved Corner Worksurfaces 1 3 16" Wire Manager Laminate with Thermofoil Laminate Wood Rim Wood A B C D H Model (T) (L) (LW) (W) 24"/24" Return Combos 36" 36" 24" 24" 1 3 16" SS24363624WSCY $ 724 $ 762 $ 1219 $ 1136 42" 42" SS24424224WSCY 774 815 1293 1210 48" 48" SS24484824WSCY 854 898 1333 1248 60" 60" SS24606024WSCY 1596 2362 2218 30"/30" Return Combos 42" 42" 30" 30" 1 3 16" SS30424230WSCY $ 887 $ 1314 $ 1248 48" 48" SS30484830WSCY 929 1374 1272 60" 60" SS30606030WSCY 1643 2432 2296 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Kimball Office Systems Page 377 Worksurfaces Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Panel system: C = Cetra X = Xsite I = Interworks EQ 5 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 6 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 7 Surface finish designator 8 Rim finish price group (include for laminate with wood rim only): 9 Rim finish designator (include for laminate with wood rim or P rim only) bl Wire manager finish designator 1 234 5 SS24363624WSCYLW3C F 6 7 8 9 bl STD 480 STD MC 480
Worksurfaces & Support GSA SIN 711-1 A C Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. B D Right-Hand Extended Straight Worksurfaces 1 3 16" Wire Manager 24"/24" Return Combos Laminate with Thermofoil Laminate Wood Rim Wood A B C D H Model (T) (L) (LW) (W) 35 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24366624WSSE $ 755 $ 863 $ 1064 $ 1059 71 7 8" SS24367224WSSE 822 942 1162 1156 77 7 8" SS24367824WSSE 889 1017 1260 1251 83 7 8" SS24368424WSSE 957 1099 1357 1349 89 7 8" SS24369024WSSE 1029 1177 1453 1445 95 7 8" SS24369624WSSE 1098 1255 1550 1541 41 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24426624WSSE 880 1007 1245 1237 71 7 8" SS24427224WSSE 957 1099 1357 1349 77 7 8" SS24427824WSSE 1038 1188 1471 1462 83 7 8" SS24428424WSSE 1119 1281 1585 1575 89 7 8" SS24429024WSSE 1198 1373 1697 1687 95 7 8" SS24429624WSSE 1278 1466 1809 1799 47 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24486624WSSE 1005 1150 1422 1412 71 7 8" SS24487224WSSE 1098 1255 1550 1541 77 7 8" SS24487824WSSE 1187 1360 1680 1669 83 7 8" SS24488424WSSE 1278 1466 1809 1799 89 7 8" SS24489024WSSE 1371 1569 1939 1926 95 7 8" SS24489624WSSE 1462 1673 2070 2053 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 SS24366624WSSELW3 F 5 6 7 8 9 STD 480 STD MC 480 Kimball Office Systems Page 378
Worksurfaces & Support GSA SIN 711-1 A C Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. B D Right-Hand Extended Straight Worksurfaces 1 3 16" Wire Manager 30"/30" Return Combos Laminate with Thermofoil Laminate Wood Rim Wood A B C D H Model (T) (L) (LW) (W) 41 7 8" 65 7 8" 29 7 8" 29 7 8" 1 3 16" SS30426630WSSE $ 880 $ 1007 $ 1245 $ 1237 71 7 8" SS30427230WSSE 957 1099 1357 1349 77 7 8" SS30427830WSSE 1038 1188 1471 1462 83 7 8" SS30428430WSSE 1119 1281 1585 1575 89 7 8" SS30429030WSSE 1198 1373 1697 1687 95 7 8" SS30429630WSSE 1278 1466 1809 1799 47 7 8" 65 7 8" 29 7 8" 29 7 8" 1 3 16" SS30486630WSSE 1005 1150 1422 1412 71 7 8" SS30487230WSSE 1098 1255 1550 1541 77 7 8" SS30487830WSSE 1187 1360 1680 1669 83 7 8" SS30488430WSSE 1278 1466 1809 1799 89 7 8" SS30489030WSSE 1371 1569 1939 1926 95 7 8" SS30489630WSSE 1462 1673 2070 2053 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 SS30426630WSSELW3 F 5 6 7 8 9 STD 480 STD MC 480 Kimball Office Systems Page 379 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 A C Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. B D Right-Hand Extended Straight Worksurfaces 1 3 16" Wire Manager 24"/30" Return Combos Laminate with Thermofoil Laminate Wood Rim Wood A B C D H Model (T) (L) (LW) (W) 41 7 8" 65 7 8" 23 7 8" 29 7 8" 1 3 16" SS24426630WSSE $ 880 $ 1007 $ 1245 $ 1237 71 7 8" SS24427230WSSE 957 1099 1357 1349 77 7 8" SS24427830WSSE 1038 1188 1471 1462 83 7 8" SS24428430WSSE 1119 1281 1585 1575 89 7 8" SS24429030WSSE 1198 1373 1697 1687 95 7 8" SS24429630WSSE 1278 1466 1809 1799 47 7 8" 65 7 8" 23 7 8" 29 7 8" 1 3 16" SS24486630WSSE 1005 1150 1422 1412 71 7 8" SS24487230WSSE 1098 1255 1550 1541 77 7 8" SS24487830WSSE 1187 1360 1680 1669 83 7 8" SS24488430WSSE 1278 1466 1809 1799 89 7 8" SS24489030WSSE 1371 1569 1939 1926 95 7 8" SS24489630WSSE 1462 1673 2070 2053 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 SS24426630WSSELW3 F 5 6 7 8 9 STD 480 STD MC 480 Kimball Office Systems Page 380
Worksurfaces & Support GSA SIN 711-1 A C Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. B D Right-Hand Extended Straight Worksurfaces 1 3 16" Wire Manager 30"/24" Return Combos Laminate with Thermofoil Laminate Wood Rim Wood A B C D H Model (T) (L) (LW) (W) 35 7 8" 65 7 8" 29 7 8" 23 7 8" 1 3 16" SS30366624WSSE $ 755 $ 863 $ 1064 $ 1059 71 7 8" SS30367224WSSE 822 942 1162 1156 77 7 8" SS30367824WSSE 889 1017 1260 1251 83 7 8" SS30368424WSSE 957 1099 1357 1349 89 7 8" SS30369024WSSE 1029 1177 1453 1445 95 7 8" SS30369624WSSE 1098 1255 1550 1541 41 7 8" 65 7 8" 29 7 8" 23 7 8" 1 3 16" SS30426624WSSE 880 1007 1245 1237 71 7 8" SS30427224WSSE 957 1099 1357 1349 77 7 8" SS30427824WSSE 1038 1188 1471 1462 83 7 8" SS30428424WSSE 1119 1281 1585 1575 89 7 8" SS30429024WSSE 1198 1373 1697 1687 95 7 8" SS30429624WSSE 1278 1466 1809 1799 47 7 8" 65 7 8" 29 7 8" 23 7 8" 1 3 16" SS30486624WSSE 1005 1150 1422 1412 71 7 8" SS30487224WSSE 1098 1255 1550 1541 77 7 8" SS30487824WSSE 1187 1360 1680 1669 83 7 8" SS30488424WSSE 1278 1466 1809 1799 89 7 8" SS30489024WSSE 1371 1569 1939 1926 95 7 8" SS30489624WSSE 1462 1673 2070 2053 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 SS30366624WSSELW3 F 5 6 7 8 9 STD 480 STD MC 480 Kimball Office Systems Page 381 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 A C IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side and back edges are finished to match front rim. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D Right-Hand Extended Straight Worksurfaces 1 3 16" Single Rim 24"/24" Return Combos Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 35 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24366624WSSE $ 822 $ 1162 $ 1070 71 7 8" SS24367224WSSE 896 1267 1169 77 7 8" SS24367824WSSE 971 1374 1266 83 7 8" SS24368424WSSE 1045 1479 1364 89 7 8" SS24369024WSSE 1121 1586 1462 95 7 8" SS24369624WSSE 1196 1692 1559 41 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24426624WSSE 958 1356 1251 71 7 8" SS24427224WSSE 1045 1479 1364 77 7 8" SS24427824WSSE 1134 1603 1478 83 7 8" SS24428424WSSE 1220 1725 1591 89 7 8" SS24429024WSSE 1307 1849 1706 95 7 8" SS24429624WSSE 1394 1973 1818 47 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24486624WSSE 1096 1548 1429 71 7 8" SS24487224WSSE 1196 1692 1559 77 7 8" SS24487824WSSE 1294 1830 1689 83 7 8" SS24488424WSSE 1394 1973 1818 89 7 8" SS24489024WSSE 1493 2112 1948 95 7 8" SS24489624WSSE 1593 2255 2078 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS24366624WSSELW1 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 382
Worksurfaces & Support GSA SIN 711-1 A C IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side and back edges are finished to match front rim. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D Right-Hand Extended Straight Worksurfaces 1 3 16" Single Rim 30"/30" Return Combos Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 41 7 8" 65 7 8" 29 7 8" 29 7 8" 1 3 16" SS30426630WSSE $ 958 $ 1356 $ 1251 71 7 8" SS30427230WSSE 1045 1479 1364 77 7 8" SS30427830WSSE 1134 1603 1478 83 7 8" SS30428430WSSE 1220 1725 1591 89 7 8" SS30429030WSSE 1307 1849 1706 95 7 8" SS30429630WSSE 1394 1973 1818 47 7 8" 65 7 8" 29 7 8" 29 7 8" 1 3 16" SS30486630WSSE 1096 1548 1429 71 7 8" SS30487230WSSE 1196 1692 1559 77 7 8" SS30487830WSSE 1294 1830 1689 83 7 8" SS30488430WSSE 1394 1973 1818 89 7 8" SS30489030WSSE 1493 2112 1948 95 7 8" SS30489630WSSE 1593 2255 2078 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS30426630WSSELW1 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 383 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 A C IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side and back edges are finished to match front rim. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D Right-Hand Extended Straight Worksurfaces 1 3 16" Single Rim 24"/30" Return Combos Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 41 7 8" 65 7 8" 23 7 8" 29 7 8" 1 3 16" SS24426630WSSE $ 958 $ 1356 $ 1251 71 7 8" SS24427230WSSE 1045 1479 1364 77 7 8" SS24427830WSSE 1134 1603 1478 83 7 8" SS24428430WSSE 1220 1725 1591 89 7 8" SS24429030WSSE 1307 1849 1706 95 7 8" SS24429630WSSE 1394 1973 1818 47 7 8" 65 7 8" 23 7 8" 29 7 8" 1 3 16" SS24486630WSSE 1096 1548 1429 71 7 8" SS24487230WSSE 1196 1692 1559 77 7 8" SS24487830WSSE 1294 1830 1689 83 7 8" SS24488430WSSE 1394 1973 1818 89 7 8" SS24489030WSSE 1493 2112 1948 95 7 8" SS24489630WSSE 1593 2255 2078 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS24426630WSSELW1 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 384
Worksurfaces & Support GSA SIN 711-1 A C IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side and back edges are finished to match front rim. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D Right-Hand Extended Straight Worksurfaces 1 3 16" Single Rim 30"/24" Return Combos Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 35 7 8" 65 7 8" 29 7 8" 23 7 8" 1 3 16" SS30366624WSSE $ 822 $ 1162 $ 1070 71 7 8" SS30367224WSSE 896 1267 1169 77 7 8" SS30367824WSSE 971 1374 1266 83 7 8" SS30368424WSSE 1045 1479 1364 89 7 8" SS30369024WSSE 1121 1586 1462 95 7 8" SS30369624WSSE 1196 1692 1559 41 7 8" 65 7 8" 29 7 8" 23 7 8" 1 3 16" SS30426624WSSE 958 1356 1251 71 7 8" SS30427224WSSE 1045 1479 1364 77 7 8" SS30427824WSSE 1134 1603 1478 83 7 8" SS30428424WSSE 1220 1725 1591 89 7 8" SS30429024WSSE 1307 1849 1706 95 7 8" SS30429624WSSE 1394 1973 1818 47 7 8" 65 7 8" 29 7 8" 23 7 8" 1 3 16" SS30486624WSSE 1096 1548 1429 71 7 8" SS30487224WSSE 1196 1692 1559 77 7 8" SS30487824WSSE 1294 1830 1689 83 7 8" SS30488424WSSE 1394 1973 1818 89 7 8" SS30489024WSSE 1493 2112 1948 95 7 8" SS30489624WSSE 1593 2255 2078 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS30366624WSSELW1 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 385 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 A C IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side edges are finished to match front and back rims. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D Right-Hand Extended Straight Worksurfaces 1 3 16" Double Rim 24"/24" Return Combos Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 35 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24366624WSSE $ 853 $ 1178 $ 1084 71 7 8" SS24367224WSSE 932 1283 1181 77 7 8" SS24367824WSSE 1009 1392 1280 83 7 8" SS24368424WSSE 1086 1499 1378 89 7 8" SS24369024WSSE 1163 1605 1478 95 7 8" SS24369624WSSE 1240 1713 1577 41 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24426624WSSE 995 1374 1264 71 7 8" SS24427224WSSE 1086 1499 1378 77 7 8" SS24427824WSSE 1175 1623 1494 83 7 8" SS24428424WSSE 1266 1749 1608 89 7 8" SS24429024WSSE 1357 1873 1725 95 7 8" SS24429624WSSE 1448 1998 1840 47 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24486624WSSE 1137 1569 1445 71 7 8" SS24487224WSSE 1240 1713 1577 77 7 8" SS24487824WSSE 1344 1855 1709 83 7 8" SS24488424WSSE 1448 1998 1840 89 7 8" SS24489024WSSE 1550 2142 1971 95 7 8" SS24489624WSSE 1655 2283 2101 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 2 = Double rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS24366624WSSELW2 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 386
Worksurfaces & Support GSA SIN 711-1 A C IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side edges are finished to match front and back rims. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D Right-Hand Extended Straight Worksurfaces 1 3 16" Double Rim 30"/30" Return Combos Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 41 7 8" 65 7 8" 29 7 8" 29 7 8" 1 3 16" SS30426630WSSE $ 995 $ 1374 $ 1264 71 7 8" SS30427230WSSE 1086 1499 1378 77 7 8" SS30427830WSSE 1175 1623 1494 83 7 8" SS30428430WSSE 1266 1749 1608 89 7 8" SS30429030WSSE 1357 1873 1725 95 7 8" SS30429630WSSE 1448 1998 1840 47 7 8" 65 7 8" 29 7 8" 29 7 8" 1 3 16" SS30486630WSSE 1137 1569 1445 71 7 8" SS30487230WSSE 1240 1713 1577 77 7 8" SS30487830WSSE 1344 1855 1709 83 7 8" SS30488430WSSE 1448 1998 1840 89 7 8" SS30489030WSSE 1550 2142 1971 95 7 8" SS30489630WSSE 1655 2283 2101 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 2 = Double rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS30426630WSSELW2 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 387 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 A C IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side edges are finished to match front and back rims. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D Right-Hand Extended Straight Worksurfaces 1 3 16" Double Rim 24"/30" Return Combos Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 41 7 8" 65 7 8" 23 7 8" 29 7 8" 1 3 16" SS24426630WSSE $ 995 $ 1374 $ 1264 71 7 8" SS24427230WSSE 1086 1499 1378 77 7 8" SS24427830WSSE 1175 1623 1494 83 7 8" SS24428430WSSE 1266 1749 1608 89 7 8" SS24429030WSSE 1357 1873 1725 95 7 8" SS24429630WSSE 1448 1998 1840 47 7 8" 65 7 8" 23 7 8" 29 7 8" 1 3 16" SS24486630WSSE 1137 1569 1445 71 7 8" SS24487230WSSE 1240 1713 1577 77 7 8" SS24487830WSSE 1344 1855 1709 83 7 8" SS24488430WSSE 1448 1998 1840 89 7 8" SS24489030WSSE 1550 2142 1971 95 7 8" SS24489630WSSE 1655 2283 2101 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 2 = Double rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS24426630WSSELW2 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 388
Worksurfaces & Support GSA SIN 711-1 A C IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side edges are finished to match front and back rims. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D Right-Hand Extended Straight Worksurfaces 1 3 16" Double Rim 30"/24" Return Combos Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 35 7 8" 65 7 8" 29 7 8" 23 7 8" 1 3 16" SS30366624WSSE $ 853 $ 1178 $ 1084 71 7 8" SS30367224WSSE 932 1283 1181 77 7 8" SS30367824WSSE 1009 1392 1280 83 7 8" SS30368424WSSE 1086 1499 1378 89 7 8" SS30369024WSSE 1163 1605 1478 95 7 8" SS30369624WSSE 1240 1713 1577 41 7 8" 65 7 8" 29 7 8" 23 7 8" 1 3 16" SS30426624WSSE 995 1374 1264 71 7 8" SS30427224WSSE 1086 1499 1378 77 7 8" SS30427824WSSE 1175 1623 1494 83 7 8" SS30428424WSSE 1266 1749 1608 89 7 8" SS30429024WSSE 1357 1873 1725 95 7 8" SS30429624WSSE 1448 1998 1840 47 7 8" 65 7 8" 29 7 8" 23 7 8" 1 3 16" SS30486624WSSE 1137 1569 1445 71 7 8" SS30487224WSSE 1240 1713 1577 77 7 8" SS30487824WSSE 1344 1855 1709 83 7 8" SS30488424WSSE 1448 1998 1840 89 7 8" SS30489024WSSE 1550 2142 1971 95 7 8" SS30489624WSSE 1655 2283 2101 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 2 = Double rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS30366624WSSELW2 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 389 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 C Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. B D A Left-Hand Extended Straight Worksurfaces 1 3 16" Wire Manager 24"/24" Return Combos Laminate with Thermofoil Laminate Wood Rim Wood A B C D H Model (T) (L) (LW) (W) 35 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24663624WSSE $ 755 $ 863 $ 1064 $ 1059 71 7 8" SS24723624WSSE 822 942 1162 1156 77 7 8" SS24783624WSSE 889 1017 1260 1251 83 7 8" SS24843624WSSE 957 1099 1357 1349 89 7 8" SS24903624WSSE 1029 1177 1453 1445 95 7 8" SS24963624WSSE 1098 1255 1550 1541 41 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24664224WSSE 880 1007 1245 1237 71 7 8" SS24724224WSSE 957 1099 1357 1349 77 7 8" SS24784224WSSE 1038 1188 1471 1462 83 7 8" SS24844224WSSE 1119 1281 1585 1575 89 7 8" SS24904224WSSE 1198 1373 1697 1687 95 7 8" SS24964224WSSE 1278 1466 1809 1799 47 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24664824WSSE 1005 1150 1422 1412 71 7 8" SS24724824WSSE 1098 1255 1550 1541 77 7 8" SS24784824WSSE 1187 1360 1680 1669 83 7 8" SS24844824WSSE 1278 1466 1809 1799 89 7 8" SS24904824WSSE 1371 1569 1939 1926 95 7 8" SS24964824WSSE 1462 1673 2070 2053 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 SS24663624WSSELW3 F 5 6 7 8 9 STD 480 STD MC 480 Kimball Office Systems Page 390
Worksurfaces & Support GSA SIN 711-1 C Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. B D A Left-Hand Extended Straight Worksurfaces 1 3 16" Wire Manager 30"/30" Return Combos Laminate with Thermofoil Laminate Wood Rim Wood A B C D H Model (T) (L) (LW) (W) 41 7 8" 65 7 8" 29 7 8" 29 7 8" 1 3 16" SS30664230WSSE $ 880 $ 1007 $ 1245 $ 1237 71 7 8" SS30724230WSSE 957 1099 1357 1349 77 7 8" SS30784230WSSE 1038 1188 1471 1462 83 7 8" SS30844230WSSE 1119 1281 1585 1575 89 7 8" SS30904230WSSE 1198 1373 1697 1687 95 7 8" SS30964230WSSE 1278 1466 1809 1799 47 7 8" 65 7 8" 29 7 8" 29 7 8" 1 3 16" SS30664830WSSE 1005 1150 1422 1412 71 7 8" SS30724830WSSE 1098 1255 1550 1541 77 7 8" SS30784830WSSE 1187 1360 1680 1669 83 7 8" SS30844830WSSE 1278 1466 1809 1799 89 7 8" SS30904830WSSE 1371 1569 1939 1926 95 7 8" SS30964830WSSE 1462 1673 2070 2053 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 SS30664230WSSELW3 F 5 6 7 8 9 STD 480 STD MC 480 Kimball Office Systems Page 391 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 C Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. B D A Left-Hand Extended Straight Worksurfaces 1 3 16" Wire Manager 24"/30" Return Combos Laminate with Thermofoil Laminate Wood Rim Wood A B C D H Model (T) (L) (LW) (W) 35 7 8" 65 7 8" 23 7 8" 29 7 8" 1 3 16" SS24663630WSSE $ 755 $ 863 $ 1064 $ 1059 71 7 8" SS24723630WSSE 822 942 1162 1156 77 7 8" SS24783630WSSE 889 1017 1260 1251 83 7 8" SS24843630WSSE 957 1099 1357 1349 89 7 8" SS24903630WSSE 1029 1177 1453 1445 95 7 8" SS24963630WSSE 1098 1255 1550 1541 41 7 8" 65 7 8" 23 7 8" 29 7 8" 1 3 16" SS24664230WSSE 880 1007 1245 1237 71 7 8" SS24724230WSSE 957 1099 1357 1349 77 7 8" SS24784230WSSE 1038 1188 1471 1462 83 7 8" SS24844230WSSE 1119 1281 1585 1575 89 7 8" SS24904230WSSE 1198 1373 1697 1687 95 7 8" SS24964230WSSE 1278 1466 1809 1799 47 7 8" 65 7 8" 23 7 8" 29 7 8" 1 3 16" SS24664830WSSE 1005 1150 1422 1412 71 7 8" SS24724830WSSE 1098 1255 1550 1541 77 7 8" SS24784830WSSE 1187 1360 1680 1669 83 7 8" SS24844830WSSE 1278 1466 1809 1799 89 7 8" SS24904830WSSE 1371 1569 1939 1926 95 7 8" SS24964830WSSE 1462 1673 2070 2053 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 SS24663630WSSELW3 F 5 6 7 8 9 STD 480 STD MC 480 Kimball Office Systems Page 392
Worksurfaces & Support GSA SIN 711-1 C Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. B D A Left-Hand Extended Straight Worksurfaces 1 3 16" Wire Manager 30"/24" Return Combos Laminate with Thermofoil Laminate Wood Rim Wood A B C D H Model (T) (L) (LW) (W) 41 7 8" 65 7 8" 29 7 8" 23 7 8" 1 3 16" SS30664224WSSE $ 880 $ 1007 $ 1245 $ 1237 71 7 8" SS30724224WSSE 957 1099 1357 1349 77 7 8" SS30784224WSSE 1038 1188 1471 1462 83 7 8" SS30844224WSSE 1119 1281 1585 1575 89 7 8" SS30904224WSSE 1198 1373 1697 1687 95 7 8" SS30964224WSSE 1278 1466 1809 1799 47 7 8" 65 7 8" 29 7 8" 23 7 8" 1 3 16" SS30664824WSSE 1005 1150 1422 1412 71 7 8" SS30724824WSSE 1098 1255 1550 1541 77 7 8" SS30784824WSSE 1187 1360 1680 1669 83 7 8" SS30844824WSSE 1278 1466 1809 1799 89 7 8" SS30904824WSSE 1371 1569 1939 1926 95 7 8" SS30964824WSSE 1462 1673 2070 2053 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 SS30664224WSSELW3 F 5 6 7 8 9 STD 480 STD MC 480 Kimball Office Systems Page 393 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 C IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side and back edges are finished to match front rim. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D A Left-Hand Extended Straight Worksurfaces 1 3 16" Single Rim 24"/24" Return Combos Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 35 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24663624WSSE $ 822 $ 1162 $ 1070 71 7 8" SS24723624WSSE 896 1267 1169 77 7 8" SS24783624WSSE 971 1374 1266 83 7 8" SS24843624WSSE 1045 1479 1364 89 7 8" SS24903624WSSE 1121 1586 1462 95 7 8" SS24963624WSSE 1196 1692 1559 41 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24664224WSSE 958 1356 1251 71 7 8" SS24724224WSSE 1045 1479 1364 77 7 8" SS24784224WSSE 1134 1603 1478 83 7 8" SS24844224WSSE 1220 1725 1591 89 7 8" SS24904224WSSE 1307 1849 1706 95 7 8" SS24964224WSSE 1394 1973 1818 47 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24664824WSSE 1096 1548 1429 71 7 8" SS24724824WSSE 1196 1692 1559 77 7 8" SS24784824WSSE 1294 1830 1689 83 7 8" SS24844824WSSE 1394 1973 1818 89 7 8" SS24904824WSSE 1493 2112 1948 95 7 8" SS24964824WSSE 1593 2255 2078 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS24663624WSSELW1 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 394
Worksurfaces & Support GSA SIN 711-1 C IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side and back edges are finished to match front rim. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D A Left-Hand Extended Straight Worksurfaces 1 3 16" Single Rim 30"/30" Return Combos Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 41 7 8" 65 7 8" 29 7 8" 29 7 8" 1 3 16" SS30664230WSSE $ 958 $ 1356 $ 1251 71 7 8" SS30724230WSSE 1045 1479 1364 77 7 8" SS30784230WSSE 1133 1603 1478 83 7 8" SS30844230WSSE 1220 1725 1591 89 7 8" SS30904230WSSE 1307 1849 1706 95 7 8" SS30964230WSSE 1394 1973 1818 47 7 8" 65 7 8" 29 7 8" 29 7 8" 1 3 16" SS30664830WSSE 1096 1548 1429 71 7 8" SS30724830WSSE 1196 1692 1559 77 7 8" SS30784830WSSE 1294 1830 1689 83 7 8" SS30844830WSSE 1394 1973 1818 89 7 8" SS30904830WSSE 1493 2112 1948 95 7 8" SS30964830WSSE 1593 2255 2078 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS30664230WSSELW1 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 395 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 C IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side and back edges are finished to match front rim. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D A Left-Hand Extended Straight Worksurfaces 1 3 16" Single Rim 24"/30" Returns Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 35 7 8" 65 7 8" 23 7 8" 29 7 8" 1 3 16" SS24663630WSSE $ 822 $ 1162 $ 1070 71 7 8" SS24723630WSSE 896 1267 1169 77 7 8" SS24783630WSSE 971 1374 1266 83 7 8" SS24843630WSSE 1045 1479 1364 89 7 8" SS24903630WSSE 1121 1586 1462 95 7 8" SS24963630WSSE 1196 1692 1559 41 7 8" 65 7 8" 23 7 8" 29 7 8" 1 3 16" SS24664230WSSE 958 1356 1251 71 7 8" SS24724230WSSE 1045 1479 1364 77 7 8" SS24784230WSSE 1134 1603 1478 83 7 8" SS24844230WSSE 1220 1725 1591 89 7 8" SS24904230WSSE 1307 1849 1706 95 7 8" SS24964230WSSE 1394 1973 1818 47 7 8" 65 7 8" 23 7 8" 29 7 8" 1 3 16" SS24664830WSSE 1096 1548 1429 71 7 8" SS24724830WSSE 1196 1692 1559 77 7 8" SS24784830WSSE 1294 1830 1689 83 7 8" SS24844830WSSE 1394 1973 1818 89 7 8" SS24904830WSSE 1493 2112 1948 95 7 8" SS24964830WSSE 1593 2255 2078 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS24663630WSSELW1 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 396
Worksurfaces & Support GSA SIN 711-1 C IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side and back edges are finished to match front rim. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D A Left-Hand Extended Straight Worksurfaces 1 3 16" Single Rim 30"/24" Returns Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 41 7 8" 65 7 8" 29 7 8" 23 7 8" 1 3 16" SS30664224WSSE $ 958 $ 1356 $ 1251 71 7 8" SS30724224WSSE 1045 1479 1364 77 7 8" SS30784224WSSE 1134 1603 1478 83 7 8" SS30844224WSSE 1220 1725 1591 89 7 8" SS30904224WSSE 1307 1849 1706 95 7 8" SS30964224WSSE 1394 1973 1818 47 7 8" 65 7 8" 29 7 8" 23 7 8" 1 3 16" SS30664824WSSE 1096 1548 1429 71 7 8" SS30724824WSSE 1196 1692 1559 77 7 8" SS30784824WSSE 1294 1830 1689 83 7 8" SS30844824WSSE 1394 1973 1818 89 7 8" SS30904824WSSE 1493 2112 1948 95 7 8" SS30964824WSSE 1593 2255 2078 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS30664224WSSELW1 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 397 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 C IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side edges are finished to match the front and back rims. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D A Left-Hand Extended Straight Worksurfaces 1 3 16" Double Rim 24"/24" Return Combos Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 35 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24663624WSSE $ 853 $ 1178 $ 1084 71 7 8" SS24723624WSSE 932 1283 1181 77 7 8" SS24783624WSSE 1009 1392 1280 83 7 8" SS24843624WSSE 1086 1499 1378 89 7 8" SS24903624WSSE 1163 1605 1478 95 7 8" SS24963624WSSE 1240 1713 1577 41 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24664224WSSE 995 1374 1264 71 7 8" SS24724224WSSE 1086 1499 1378 77 7 8" SS24784224WSSE 1175 1623 1494 83 7 8" SS24844224WSSE 1266 1749 1608 89 7 8" SS24904224WSSE 1357 1873 1725 95 7 8" SS24964224WSSE 1448 1998 1840 47 7 8" 65 7 8" 23 7 8" 23 7 8" 1 3 16" SS24664824WSSE 1137 1569 1445 71 7 8" SS24724824WSSE 1240 1713 1577 77 7 8" SS24784824WSSE 1344 1855 1709 83 7 8" SS24844824WSSE 1448 1998 1840 89 7 8" SS24904824WSSE 1550 2142 1971 95 7 8" SS24964824WSSE 1655 2283 2101 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 2 = Double rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS24663624WSSELW2 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 398
Worksurfaces & Support GSA SIN 711-1 C IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side edges are finished to match the front and back rims. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D A Left-Hand Extended Straight Worksurfaces 1 3 16" Double Rim 30"/30" Return Combos Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 41 7 8" 65 7 8" 29 7 8" 29 7 8" 1 3 16" SS30664230WSSE $ 995 $ 1374 $ 1264 71 7 8" SS30724230WSSE 1086 1499 1378 77 7 8" SS30784230WSSE 1175 1623 1494 83 7 8" SS30844230WSSE 1266 1749 1608 89 7 8" SS30904230WSSE 1357 1873 1725 95 7 8" SS30964230WSSE 1448 1998 1840 47 7 8" 65 7 8" 29 7 8" 29 7 8" 1 3 16" SS30664830WSSE 1137 1569 1445 71 7 8" SS30724830WSSE 1240 1713 1577 77 7 8" SS30784830WSSE 1344 1855 1709 83 7 8" SS30844830WSSE 1448 1998 1840 89 7 8" SS30904830WSSE 1550 2142 1971 95 7 8" SS30964830WSSE 1655 2283 2101 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 2 = Double rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS30664230WSSELW2 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 399 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 C IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side edges are finished to match the front and back rims. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D A Left-Hand Extended Straight Worksurfaces 1 3 16" Double Rim 24"/30" Return Combos Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 35 7 8" 65 7 8" 23 7 8" 29 7 8" 1 3 16" SS24663630WSSE $ 853 $ 1178 $ 1084 71 7 8" SS24723630WSSE 932 1283 1181 77 7 8" SS24783630WSSE 1009 1392 1280 83 7 8" SS24843630WSSE 1086 1499 1378 89 7 8" SS24903630WSSE 1163 1605 1478 95 7 8" SS24963630WSSE 1240 1713 1577 41 7 8" 65 7 8" 23 7 8" 29 7 8" 1 3 16" SS24664230WSSE 995 1374 1264 71 7 8" SS24724230WSSE 1086 1499 1378 77 7 8" SS24784230WSSE 1175 1623 1494 83 7 8" SS24844230WSSE 1266 1749 1608 89 7 8" SS24904230WSSE 1357 1873 1725 95 7 8" SS24964230WSSE 1448 1998 1840 47 7 8" 65 7 8" 23 7 8" 29 7 8" 1 3 16" SS24664830WSSE 1137 1569 1445 71 7 8" SS24724830WSSE 1240 1713 1577 77 7 8" SS24784830WSSE 1344 1855 1709 83 7 8" SS24844830WSSE 1448 1998 1840 89 7 8" SS24904830WSSE 1550 2142 1971 95 7 8" SS24964830WSSE 1655 2283 2101 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 2 = Double rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS24663630WSSELW2 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 400
Worksurfaces & Support GSA SIN 711-1 C IMPORTANT: Brackets must be specified separately. Return combo dimensions are determined from left to right when seated at the worksurface. Side edges are finished to match the front and back rims. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D A Left-Hand Extended Straight Worksurfaces 1 3 16" Double Rim 30"/24" Return Combos Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 41 7 8" 65 7 8" 29 7 8" 23 7 8" 1 3 16" SS30664224WSSE $ 995 $ 1374 $ 1264 71 7 8" SS30724224WSSE 1086 1499 1378 77 7 8" SS30784224WSSE 1175 1623 1494 83 7 8" SS30844224WSSE 1266 1749 1608 89 7 8" SS30904224WSSE 1357 1873 1725 95 7 8" SS30964224WSSE 1448 1998 1840 47 7 8" 65 7 8" 29 7 8" 23 7 8" 1 3 16" SS30664824WSSE 1137 1569 1445 71 7 8" SS30724824WSSE 1240 1713 1577 77 7 8" SS30784824WSSE 1344 1855 1709 83 7 8" SS30844824WSSE 1448 1998 1840 89 7 8" SS30904824WSSE 1550 2142 1971 95 7 8" SS30964824WSSE 1655 2283 2101 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 2 = Double rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS30664224WSSELW2 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 401 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 A C IMPORTANT: Brackets must be specified separately. Side A dimension for thermofoil worksurfaces is 40 9 32". Consider dimension "E" when specifying pedestals for use with extended arc worksurfaces. Extended arc worksurfaces with an E dimension of 15 1 8" are for use with 15"W pedestals only. Side edges are finished to match the front and back rims. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. E D Right-Hand Extended Arc Worksurfaces 1 3 16" Double Rim Laminate with Thermofoil Laminate Wood Rim Wood A B C D E H Model (T) (L) (LW) (W) 30"/30" Return Combos 41 7 8" 77 7 8" 29 7 8" 29 7 8" 15 1 8" 1 3 16" SS30427830WSAE $ 1139 $ 1234 $ 1707 $ 1570 83 7 8" 21 1 8" SS30428430WSAE 1236 1330 1836 1692 47 7 8" 77 7 8" 15 1 8" SS30487830WSAE 1412 1948 1794 83 7 8" 21 1 8" SS30488430WSAE 1522 2099 1932 24"/30" Return Combos 41 7 8" 71 7 8" 23 7 8" 29 7 8" 15 1 8" 1 3 16" SS24427230WSAE $ 1046 $ 1141 $ 1576 $ 1449 77 7 8" 21 1 8" SS24427830WSAE 1139 1234 1707 1570 83 7 8" 27 1 8" SS24428430WSAE 1236 1330 1836 1692 47 7 8" 71 7 8" 23 7 8" 29 7 8" 15 1 8" 1 3 16" SS24487230WSAE 1303 1801 1657 77 7 8" 21 1 8" SS24487830WSAE 1412 1948 1794 83 7 8" 27 1 8" SS24488430WSAE 1522 2099 1932 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Dimensions for Space Planning: 32" 36" 16" on 42"D worksurface 22" on 48"D worksurface Note: Dimensions for thermofoil work surfaces are 1 2" less than shown. Kimball Office Systems Page 402 Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 2 = Double rim 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS30427830WSAELW2 F 5 6 7 8 STD 480 STD MC
Worksurfaces & Support GSA SIN 711-1 C E Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Side A dimension for thermofoil worksurfaces is 40 9 32". Consider dimension "E" when specifying pedestals for use with extended arc worksurfaces. Extended arc worksurfaces with an E dimension of 15 1 8" are for use with 15"W pedestals only. Side edges are finished to match the front and back rims. B D A Left-Hand Extended Arc Worksurfaces 1 3 16" Double Rim Laminate with Thermofoil Laminate Wood Rim Wood A B C D E H Model (T) (L) (LW) (W) 30"/30" Return Combos 41 7 8" 77 7 8" 29 7 8" 29 7 8" 15 1 8" 1 3 16" SS30784230WSAE $ 1139 $ 1234 $ 1707 $ 1570 83 7 8" 21 1 8" SS30844230WSAE 1236 1330 1836 1692 47 7 8" 77 7 8" 15 1 8" SS30784830WSAE 1412 1948 1794 83 7 8" 21 1 8" SS30844830WSAE 1522 2099 1932 30"/24" Return Combos 41 7 8" 71 7 8" 29 7 8" 23 7 8" 15 1 8" 1 3 16" SS30724224WSAE $ 1046 $ 1141 $ 1576 $ 1449 77 7 8" 21 1 8" SS30784224WSAE 1139 1234 1707 1570 83 7 8" 27 1 8" SS30844224WSAE 1236 1330 1836 1692 47 7 8" 71 7 8" 29 7 8" 23 7 8" 15 1 8" 1 3 16" SS30724824WSAE 1303 1801 1657 77 7 8" 21 1 8" SS30784824WSAE 1412 1948 1794 83 7 8" 27 1 8" SS30844824WSAE 1522 2099 1932 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Dimensions for Space Planning: 32" 36" 16" on 42"D worksurface 22" on 48"D worksurface Note: Dimensions for thermofoil work surfaces are 1 2" less than shown. Kimball Office Systems Page 403 Worksurfaces Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 2 = Double rim 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS30784230WSAELW2 F 5 6 7 8 STD 480 STD MC
Worksurfaces & Support GSA SIN 711-1 A C Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Mobile pedestals are recommended for use with extended wedge worksurfaces. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. B Right-Hand Extended Wedge Worksurfaces 1 3 16" Wire Manager Laminate with Thermofoil Laminate Wood Rim Wood A B C H Model (T) (L) (LW) (W) 24" Return Combo 41 7 8" 71 7 8" 23 7 8" 1 3 16" SS24427224WSWE $ 1007 $ 1153 $ 1425 $ 1415 77 7 8" SS24427824WSWE 1091 1248 1543 1535 47 7 8" 71 7 8" 23 7 8" 1 3 16" SS24487224WSWE 1152 1320 1630 1617 77 7 8" SS24487824WSWE 1248 1430 1765 1752 30" Return Combo 41 7 8" 77 7 8" 29 7 8" 1 3 16" SS30427830WSWE $ 1091 $ 1248 $ 1543 $ 1535 47 7 8" SS30487830WSWE 1248 1430 1765 1752 Rim Profiles: Note: The sloped rim on thermofoil extended wedge worksurfaces with wire manager flattens on the top and side to allow attachment of the wire manager. Sloped (S) Plastic (P) Softened (F) Dimensions for Space Planning: 25" 31" 17" on 42"D worksurface 23" on 48"D worksurface Kimball Office Systems Page 404 Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 SS24427224WSWELW3 F 5 6 7 8 9 STD 480 STD MC 480
Worksurfaces & Support GSA SIN 711-1 Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Mobile pedestals are recommended for use with extended wedge worksurfaces. Side edges are finished to match the top; wire manager is on the back edge. Exception: Side edges on worksurfaces with plastic rim option (P) are finished to match the front plastic rim. B C A Left-Hand Extended Wedge Worksurfaces 1 3 16" Wire Manager Laminate with Thermofoil Laminate Wood Rim Wood A B C H Model (T) (L) (LW) (W) 24" Return Combo 41 7 8" 71 7 8" 23 7 8" 1 3 16" SS24724224WSWE $ 1007 $ 1153 $ 1425 $ 1415 77 7 8" SS24784224WSWE 1091 1248 1543 1535 47 7 8" 71 7 8" 23 7 8" 1 3 16" SS24724824WSWE 1152 1320 1630 1617 77 7 8" SS24784824WSWE 1248 1430 1765 1752 30" Return Combo 41 7 8" 77 7 8" 29 7 8" 1 3 16" SS30784230WSWE $ 1091 $ 1248 $ 1543 $ 1535 47 7 8" SS30784830WSWE 1248 1430 1765 1752 Rim Profiles: Note: The sloped rim on thermofoil extended wedge worksurfaces with wire manager flattens on the top and side to allow attachment of the wire manager. Sloped (S) Plastic (P) Softened (F) Dimensions for Space Planning: 25" 31" 17" on 42"D worksurface 23" on 48"D worksurface Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 SS24724224WSWELW3 F 5 6 7 8 9 STD 480 STD MC 480 Kimball Office Systems Page 405 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 A C Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Mobile pedestals are recommended for use with extended wedge worksurfaces. Side and back edges are finished to match front rim. B B C A Extended Wedge Worksurfaces 1 3 16" Single Rim Laminate with Laminate Wood Rim Wood A B C H Model (L) (LW) (W) Right-Hand 24" Return Combo 41 7 8" 71 7 8" 23 7 8" 1 3 16" SS24427224WSWE $ 1099 $ 1556 $ 1431 77 7 8" SS24427824WSWE 1189 1684 1553 47 7 8" 71 7 8" SS24487224WSWE 1254 1775 1637 77 7 8" SS24487824WSWE 1359 1924 1774 30" Return Combo 41 7 8" 77 7 8" 29 7 8" 1 3 16" SS30427830WSWE $ 1189 $ 1684 $ 1553 47 7 8" SS30487830WSWE 1359 1924 1774 Left-Hand 24" Return Combo 41 7 8" 71 7 8" 23 7 8" 1 3 16" SS24724224WSWE $ 1099 $ 1556 $ 1431 77 7 8" SS24784224WSWE 1189 1684 1553 47 7 8" 71 7 8" SS24724824WSWE 1254 1775 1637 77 7 8" SS24784824WSWE 1359 1924 1774 30" Return Combo 41 7 8" 77 7 8" 29 7 8" 1 3 16" SS30784230WSWE $ 1189 $ 1684 $ 1553 47 7 8" SS30784830WSWE 1359 1924 1774 Rim Profiles: Plastic (P) Softened (F) Dimensions for Space Planning: 25" 31" 17" on 42"D worksurface 23" on 48"D worksurface Kimball Office Systems Page 406 Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS24427224WSWELW1 F 5 6 7 8 STD 480 STD MC
Worksurfaces & Support GSA SIN 711-1 A C IMPORTANT: Brackets must be specified separately. IMPORTANT: Notice the hand orientation of these surfaces. Side and back edges are finished to match front rim. Conference area of extended P-top worksurface has a diameter of 40". P-tops used in freestanding applications must be attached to a return or extension for additional support. Extended P-tops should be specified with a 24"D return or corner worksurface. B Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. B C A Extended P-Top Worksurfaces 1 3 16" Single Rim Laminate with Laminate Wood Rim Wood A B C H Model (L) (LW) (W) Right-Hand 47 7 8" 77 7 8" 23 7 8" 1 3 16" SS244878WSPE $ 1863 $ 2433 $ 2261 Left-Hand 47 7 8" 77 7 8" 23 7 8" 1 3 16" SS784824WSPE $ 1863 $ 2433 $ 2261 Rim Profiles: Plastic (P) Softened (F) Kimball Office Systems Page 407 Worksurfaces Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS244878WSPELW1 F 5 6 7 8 STD 480 STD MC
Worksurfaces & Support GSA SIN 711-1 A C B Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. B C A Extended U-Top Worksurfaces 1 3 16" Wire Manager Laminate A B C H Model (L) Right-Hand 47 7 8" 59 7 8" 23 7 8" 1 3 16" SS244860WSUE $ 882 65 7 8" SS244866WSUE 919 71 7 8" SS244872WSUE 997 83 7 8" SS244884WSUE 1062 47 7 8" 71 7 8" 29 7 8" 1 3 16" SS304872WSUE 1064 Left-Hand 83 7 8" SS304884WSUE 1121 47 7 8" 59 7 8" 23 7 8" 1 3 16" SS604824WSUE $ 882 65 7 8" SS664824WSUE 919 71 7 8" SS724824WSUE 997 83 7 8" SS844824WSUE 1062 47 7 8" 71 7 8" 29 7 8" 1 3 16" SS724830WSUE 1064 83 7 8" SS844830WSUE 1121 Rim Profiles: Plastic (P) Kimball Office Systems Page 408 Brackets & Support page 436 IMPORTANT: Brackets must be specified separately. IMPORTANT: Notice the hand orientation of these surfaces. Side edges are finished to match front rim. Wire manager is on the back edge. U-tops used in freestanding applications must be attached to a return or extension for additional support. Extended U-tops should be specified with a 24"D return or corner worksurface. 3 Rim option: 3 = Wire manager 4 Rim profile: P = Plastic rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish designator 8 Wire manager finish designator 1 23 4 SS244860WSUEL3 P 5 6 7 8 STD 480 480 480
Worksurfaces & Support GSA SIN 711-1 A C Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. B IMPORTANT: Brackets must be specified separately. IMPORTANT: Notice the hand orientation of these surfaces. Side and back edges are finished to match front rim. U-tops used in freestanding applications must be attached to a return or extension for additional support. Extended U-tops should be specified with a 24"D return or corner worksurface. B C A Extended U-Top Worksurfaces 1 3 16" Single Rim Laminate with Laminate Wood Rim Wood A B C H Model (L) (LW) (W) Right-Hand 47 7 8" 59 7 8" 23 7 8" 1 3 16" SS244860WSUE $ 823 65 7 8" SS244866WSUE 859 71 7 8" SS244872WSUE 931 $ 1713 $ 1564 83 7 8" SS244884WSUE 993 47 7 8" 71 7 8" 29 7 8" 1 3 16" SS304872WSUE 995 Left-Hand 83 7 8" SS304884WSUE 1047 47 7 8" 59 7 8" 23 7 8" 1 3 16" SS604824WSUE $ 823 65 7 8" SS664824WSUE 859 71 7 8" SS724824WSUE 931 $ 1713 $ 1564 83 7 8" SS844824WSUE 993 47 7 8" 71 7 8" 29 7 8" 1 3 16" SS724830WSUE 995 83 7 8" SS844830WSUE 1047 Rim Profiles: Plastic (P) Softened (F) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single-rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 SS244860WSUEL1 P 5 6 8 STD 480 480 Kimball Office Systems Page 409 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 D IMPORTANT: Brackets must be specified separately. IMPORTANT: Notice the hand orientation of P-top surfaces. Rim detail appears on the front and user edges. Side edges are finished to match front rim. Conference area of 30"D P-top worksurface is 42" in diameter; it is 48" in diameter on a 36"D P-top. P-tops used in freestanding applications must be attached to a return or extension for additional support. W W Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. D P-Top Worksurfaces 1 3 16" Single Rim Laminate with Thermofoil Laminate Wood Rim Wood D W H Model (T) (L) (LW) (W) Right-Hand 29 7 8" 71 7 8" 1 3 16" SS3072WSP $ 919 $ 1003 $ 1330 $ 1211 35 7 8" 83 7 8" SS3684WSP 1156 1260 1658 1505 Left-Hand 29 7 8" 71 7 8" 1 3 16" SS7230WSP $ 919 $ 1003 $ 1330 $ 1211 35 7 8" 83 7 8" SS8436WSP 1156 1260 1658 1505 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Kimball Office Systems Page 410 Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 5 SS3072WSPLW1 F STD 6 7 8 480 STD MC
Worksurfaces & Support GSA SIN 711-1 D D W W Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. U-Top Worksurfaces 1 3 16" Wire Manager Laminate D W H Model (L) Radius 29 7 8" 59 7 8" 1 3 16" SS3060WSU $ 730 65 7 8" SS3066WSU 764 71 7 8" SS3072WSU 795 35 7 8" 59 7 8" 1 3 16" SS3660WSU 776 Crowned 65 7 8" SS3666WSU 808 71 7 8" SS3672WSU 840 29 7 8" 59 7 8" 1 3 16" SS3060WSUC $ 730 65 7 8" SS3066WSUC 764 71 7 8" SS3072WSUC 795 35 7 8" 59 7 8" 1 3 16" SS3660WSUC 776 65 7 8" SS3666WSUC 808 71 7 8" SS3672WSUC 840 = Kwik Office model available. See the Kwik Office Price List. Brackets & Support page 436 IMPORTANT: Brackets must be specified separately. Wire manager is on the back edge. U-tops used in freestanding applications must be attached to a return or extension for additional support. 3 Rim option: 3 = Wire manager 4 Rim profile: P = Plastic rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish designator 8 Wire manager finish designator Rim Profiles: 1 23 4 5 SS3060WSUL3 P STD 6 7 8 480 480 480 Plastic (P) Kimball Office Systems Page 411 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 D D W W Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Back edge is finished to match front rim. U-tops used in freestanding applications must be attached to a return or extension for additional support. U-Top Worksurfaces 1 3 16" Single Rim Laminate with Thermofoil Laminate Wood Rim Wood D W H Model (T) (L) (LW) (W) Radius 29 7 8" 59 7 8" 1 3 16" SS3060WSU $ 582 $ 636 $ 953 $ 842 65 7 8" SS3066WSU 629 687 998 931 71 7 8" SS3072WSU 676 736 1043 945 35 7 8" 59 7 8" 1 3 16" SS3660WSU 724 Crowned 65 7 8" SS3666WSU 755 71 7 8" SS3672WSU 755 785 1139 1023 29 7 8" 59 7 8" 1 3 16" SS3060WSUC $ 636 65 7 8" SS3066WSUC 687 71 7 8" SS3072WSUC 736 35 7 8" 59 7 8" 1 3 16" SS3660WSUC 724 65 7 8" SS3666WSUC 755 71 7 8" SS3672WSUC 785 Rim Profiles: Sloped (S) Plastic (P) Softened (F) = Kwik Office model available. See the Kwik Office Price List. Brackets & Support page 436 T = Thermofoil LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim 4 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 5 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 5 SS3060WSULW1 F STD 6 7 8 480 STD MC Kimball Office Systems Page 412
Worksurfaces & Support GSA SIN 711-1 W W IMPORTANT: Worksurfaces are notched appropriately and dimen sionally adjusted for the panel type specified. IMPORTANT: Brackets must be specified separately. Rim detail appears on the front rim only; back edges are finished to match front rim. D D Note: Bold line indicates location of rim detail. D-Shape and Wedge Spanner Worksurfaces 1 3 16" Single Rim Laminate with Thermofoil Laminate Wood Rim Wood D W H Model (T) (L) (LW) (W) D-Shape Worksurfaces For Use with Two 24"D Worksurfaces 30" 50 3 8" 1 3 16" SS2424WSD $ 914 $ 996 $ 1695 $ 1141 For Use with Two 30"D Worksurfaces 36" 62 3 8" SS3030WSD $ 1078 $ 1177 $ 2001 $ 1376 Wedge Spanner For Use with Two 24"D Worksurfaces 43" 49 27 32" 1 3 16" SS2424WSWS $ 1008 $ 1100 $ 1780 $ 1254 For Use with Two 30"D Worksurfaces 48" 61 27 32" SS3030WSWS $ 1297 $ 2101 $ 1512 Grain Direction: D-Shape Wood Rim Profiles: Laminate or Thermofoil Wedge Spanner Wood Sloped (S) Plastic (P) Softened (F) Laminate or Thermofoil Dimensions for Space Planning: 50"W model 62"W model Kimball Office Systems Page 413 6" 61 27 32 " 6 1 4" 28 3 8" 29" Note: Cetra panel type dimensions shown. 74 3 8" Worksurfaces Brackets & Support page 436 T = Thermofoil W = Wood LW = Laminate with wood rim 3 Rim option: 1 = Single rim 4 Panel type: X = Xsite C = Cetra I = Interworks EQ 5 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 6 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 7 Surface finish designator 8 Rim finish price group (include for laminate with wood rim only): 9 Rim finish designator (include for laminate with wood rim or P rim only) 1 234 5 6 SS2424WSDLW1X F STD 7 8 9 480 STD MC
Worksurfaces & Support GSA SIN 711-1 D D W W Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Rim detail appears on the front rim only; back edges are finished to match front rim. Quarter Round Worksurfaces 1 3 16" Single Rim Laminate with Thermofoil Laminate Wood Rim Wood D W H Model (T) (L) (LW) (W) Notched Quarter Round 23 7 8" 23 7 8" 1 3 16" SS2424WSQRN $ 355 $ 386 $ 672 $ 607 29 7 8" 29 7 8" SS3030WSQRN 388 426 753 647 Un-Notched Quarter Round 23 7 8" 23 7 8" 1 3 16" SS2424WSQR $ 355 $ 386 $ 672 $ 607 29 7 8" 29 7 8" SS3030WSQR 388 426 753 647 Rim Profiles: Sloped (S) Plastic (P) Softened (F) Dimensions for Space Planning: 23" on 24"D worksurface 29" on 30"D worksurface Note: Cetra panel type dimensions shown. Kimball Office Systems Page 414 Brackets & Support page 436 T = Thermofoil W = Wood LW = Laminate with wood rim 3 Rim option: 1 = Single rim 4 Panel type (omit for un-notched quarter round): X = Xsite C = Cetra I = Interworks EQ 5 Rim profile: S = Sloped rim (available on thermofoil surface only) P = Plastic rim (available on laminate surface only) F = Wood, softened rim 6 Surface finish price group: STD2 = Group 2 thermofoil (+$60); Group 2 wood (+20%) 7 Surface finish designator 8 Rim finish price group (include for laminate with wood rim only): 9 Rim finish designator (include for laminate with wood rim or P rim only) 1 234 5 6 SS2424WSQRNLW1X F STD 7 8 9 480 STD MC
Worksurfaces & Support GSA SIN 711-1 Cable Management Accessories D W H Model Description Price Wire Manager Filler Cap 3 4" 15 16" 15 16" IAWMF Caps rear wire manager when exposed at $ 20 end-of-run. 2 Finish designator 1 2 iawmf 462 Kimball Office Systems Page 415 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 W Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Side edges are finished to match the top. D 18"D and 24"D Straight Worksurfaces 1 9 16" Wire Manager Laminate with Laminate Wood Rim Wood D W H Model (L) (LW) (W) 17 7 8" 23 7 8" 1 9 16" ST1824WSS $ 214 $ 339 $ 354 29 7 8" ST1830WSS 234 368 383 35 7 8" ST1836WSS 261 400 421 41 7 8" ST1842WSS 287 432 453 47 7 8" ST1848WSS 314 467 488 59 7 8" ST1860WSS 357 526 553 65 7 8" ST1866WSS 383 557 587 71 7 8" ST1872WSS 408 590 622 23 7 8" 23 7 8" 1 9 16" ST2424WSS 232 349 371 29 7 8" ST2430WSS 253 378 402 35 7 8" ST2436WSS 280 421 450 41 7 8" ST2442WSS 314 463 491 47 7 8" ST2448WSS 341 471 539 53 7 8" ST2454WSS 378 506 571 59 7 8" ST2460WSS 395 583 620 65 7 8" ST2466WSS 426 627 660 71 7 8" ST2472WSS 457 668 708 77 7 8" ST2478WSS 494 714 757 83 7 8" ST2484WSS 536 762 805 89 7 8" ST2490WSS 570 809 857 95 7 8" ST2496WSS 610 857 901 101 7 8" ST24102WSS 674 899 952 107 7 8" ST24108WSS 716 945 1002 113 7 8" ST24114WSS 759 1010 1129 119 7 8" ST24120WSS 799 1040 1211 Rim Profiles: Plastic (P) Waterfall (K) Softened (F) Reed (W) Scalloped (X) Transitional (E) Kimball Office Systems Page 416 Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager (plastic and wood rims) 31 = Wire manager (K rim only) 4 Rim profile: P = Plastic rim (available on laminate surface only) K = Waterfall rim (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 5 ST2430WSSLW3 F STD 6 7 8 9 480 STD MC 480
Worksurfaces & Support GSA SIN 711-1 W Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Side and back edges are finished to match front rim. D 24"D Straight Worksurfaces 1 9 16" Single Rim Laminate with Laminate Wood Rim Wood D W H Model (L) (LW) (W) 23 7 8" 23 7 8" 1 9 16" ST2424WSS $ 223 $ 492 $ 442 29 7 8" ST2430WSS 241 532 478 35 7 8" ST2436WSS 272 561 504 41 7 8" ST2442WSS 314 599 539 47 7 8" ST2448WSS 352 647 586 53 7 8" ST2454WSS 388 707 636 59 7 8" ST2460WSS 427 740 669 65 7 8" ST2466WSS 498 809 728 71 7 8" ST2472WSS 514 840 756 77 7 8" ST2478WSS 560 883 794 83 7 8" ST2484WSS 605 953 859 89 7 8" ST2490WSS 648 995 898 95 7 8" ST2496WSS 693 1066 959 101 7 8" ST24102WSS 788 1179 1065 107 7 8" ST24108WSS 820 1208 1089 113 7 8" ST24114WSS 859 1252 1142 119 7 8" ST24120WSS 899 1290 1226 Rim Profiles: Plastic (P) Waterfall (K) Softened (F) Reed (W) Scalloped (X) Transitional (E) Kimball Office Systems Page 417 Worksurfaces LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim (plastic & wood rims) 11 = Single rim (K rim only) 4 Rim profile: P = Plastic rim (available on laminate surface only) K = Waterfall rim (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 5 ST2430WSSLW1 F STD 6 7 8 480 STD MC 1 23 4 5 ST2430WSSL11 K STD 6 480 Brackets & Support page 436
Worksurfaces & Support GSA SIN 711-1 W Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Side edges are finished to match the top; wire manager is on the back edge. D 30"D Straight Worksurfaces 1 9 16" Wire Manager Laminate with Laminate Wood Rim Wood D W H Model (L) (LW) (W) 29 7 8" 23 7 8" 1 9 16" ST3024WSS $ 262 $ 404 $ 441 29 7 8" ST3030WSS 280 435 479 35 7 8" ST3036WSS 319 488 534 41 7 8" ST3042WSS 359 541 589 47 7 8" ST3048WSS 435 593 641 53 7 8" ST3054WSS 450 669 694 59 7 8" ST3060WSS 465 692 740 65 7 8" ST3066WSS 506 742 792 71 7 8" ST3072WSS 543 792 847 77 7 8" ST3078WSS 594 848 907 83 7 8" ST3084WSS 638 907 964 89 7 8" ST3090WSS 684 962 1026 95 7 8" ST3096WSS 730 1016 1082 101 7 8" ST30102WSS 808 1076 1138 107 7 8" ST30108WSS 860 1132 1208 113 7 8" ST30114WSS 926 1199 1286 119 7 8" ST30120WSS 953 1244 1315 Rim Profiles: Plastic (P) Waterfall (K) Softened (F) Reed (W) Scalloped (X) Transitional (E) Kimball Office Systems Page 418 Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager (plastic and wood rims) 31 = Wire manager (K rim only) 4 Rim profile: P = Plastic rim (available on laminate surface only) K = Waterfall rim (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 5 ST3030WSSLW3 F STD 6 7 8 9 480 STD MC 480 1 23 4 5 ST3030WSSL31 K STD 6 9 480 480
Worksurfaces & Support GSA SIN 711-1 W Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Side and back edges are finished to match front rim. D 30"D Straight Worksurfaces 1 9 16" Single Rim Laminate with Laminate Wood Rim Wood D W H Model (L) (LW) (W) 29 7 8" 23 7 8" 1 9 16" ST3024WSS $ 254 $ 532 $ 482 29 7 8" ST3030WSS 274 573 520 35 7 8" ST3036WSS 319 616 553 41 7 8" ST3042WSS 370 660 596 47 7 8" ST3048WSS 423 714 651 53 7 8" ST3054WSS 464 786 708 59 7 8" ST3060WSS 508 824 755 65 7 8" ST3066WSS 592 911 820 71 7 8" ST3072WSS 612 940 862 77 7 8" ST3078WSS 665 992 917 83 7 8" ST3084WSS 714 1072 981 89 7 8" ST3090WSS 763 1119 1039 95 7 8" ST3096WSS 815 1194 1094 101 7 8" ST30102WSS 900 1302 1173 107 7 8" ST30108WSS 958 1362 1227 113 7 8" ST30114WSS 1008 1412 1318 119 7 8" ST30120WSS 1055 1453 1380 Rim Profiles: Plastic (P) Waterfall (K) Softened (F) Reed (W) Scalloped (X) Transitional (E) Kimball Office Systems Page 419 Worksurfaces Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim (plastic and wood rims) 11 = Single rim (K rim only) 4 Rim profile: P = Plastic rim (available on laminate surface only) K = Waterfall rim (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 5 ST3030WSSLW1 F STD 6 7 8 480 STD MC 1 23 4 5 ST3030WSSL11 K STD 6 480
Worksurfaces & Support GSA SIN 711-1 W Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Side edges are finished to match the front and back rims. Double rim worksurfaces are designed for freestanding applications. D 30"D and 36"D Straight Worksurfaces 1 9 16" Double Rim Laminate with Laminate Wood Rim Wood D W H Model (L) (LW) (W) 29 7 8" 59 7 8" 1 9 16" ST3060WSS $ 560 $ 895 $ 811 65 7 8" ST3066WSS 642 969 878 71 7 8" ST3072WSS 660 1010 954 77 7 8" ST3078WSS 714 1057 970 83 7 8" ST3084WSS 772 1148 1034 89 7 8" ST3090WSS 815 1197 1136 95 7 8" ST3096WSS 868 1283 1159 101 7 8" ST30102WSS 954 1414 1232 107 7 8" ST30108WSS 1017 1475 1347 113 7 8" ST30114WSS 1065 1527 1440 119 7 8" ST30120WSS 1110 1570 1492 35 7 8" 59 7 8" 1 9 16" ST3660WSS 621 978 884 65 7 8" ST3666WSS 714 1062 962 71 7 8" ST3672WSS 739 1107 997 77 7 8" ST3678WSS 796 1159 1111 83 7 8" ST3684WSS 858 1278 1204 89 7 8" ST3690WSS 912 1333 1324 95 7 8" ST3696WSS 970 1483 1347 101 7 8" ST36102WSS 1067 1624 1432 107 7 8" ST36108WSS 1138 1694 1532 113 7 8" ST36114WSS 1197 1753 1679 119 7 8" ST36120WSS 1249 1809 1735 Rim Profiles: Plastic (P) Waterfall (K) Softened (F) Reed (W) Scalloped (X) Transitional (E) Kimball Office Systems Page 420 Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 2 = Double rim (plastic and wood rims) 21 = Double rim (K rim only) 4 Rim profile: P = Plastic rim (available on laminate surface only) K = Waterfall rim (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 5 ST3060WSSLW2 F STD 6 7 8 480 STD MC 1 23 4 5 ST3060WSSL21 K STD 6 480
Worksurfaces & Support GSA SIN 711-1 W Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Arc worksurfaces are 30"D on the ends and 36"D in the center. Rim detail appears on the front and back rims. Side edges are finished to match the front and back rims. Double rim worksurfaces are designed for freestanding applications. D Arc Worksurfaces 1 9 16" Double Rim Laminate with Laminate Wood Rim Wood D W H Model (L) (LW) (W) 29 7 8" 71 7 8" 1 9 16" ST3672WSA $ 920 $ 1312 $ 1187 77 7 8" ST3678WSA 982 1367 1312 83 7 8" ST3684WSA 1039 1484 1402 89 7 8" ST3690WSA 1094 1628 1524 95 7 8" ST3696WSA 1154 1693 1544 Rim Profiles: Plastic (P) Softened (F) Reed (W) Scalloped (X) Transitional (E) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 2 = Double rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim): 8 Rim finish designator (include for laminate with wood rim and P rim) 1 23 4 5 ST3672WSALW2 F STD 6 7 8 480 STD MC Kimball Office Systems Page 421 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 A C Note: Bold line indicates location of rim detail. Arrows on surfaces indicate grain direction. IMPORTANT: Brackets must be specified separately. IMPORTANT: Notice the hand orientation of these surfaces. Side and back edges are finished to match front rim. Conference area of extended P-top is 40" in diameter. P-tops used in freestanding applications must be attached to a return or extension for additional support. Extended P-tops should be specified with a 24"D return or corner worksurface. B B C A Extended P-Top Worksurfaces 1 9 16" Single Rim Laminate with Laminate Wood Rim Wood A B C H Model (L) (LW) (W) Right-Hand 47 7 8" 77 7 8" 23 7 8" 1 9 16" ST244878WSPE $ 2058 $ 2689 $ 2499 Left-Hand 47 7 8" 77 7 8" 23 7 8" 1 9 16" ST784824WSPE $ 2058 $ 2689 $ 2499 Rim Profiles: Plastic (P) Softened (F) Reed (W) Scalloped (X) Transitional (E) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single Rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 ST244878WSPELW1 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 422
Worksurfaces & Support GSA SIN 711-1 A C IMPORTANT: Brackets must be specified separately. IMPORTANT: Notice the hand orientation of these surfaces. Side and back edges are finished to match front rim. Conference area of extended U-top worksurface is 30" in diameter. U-tops used in freestanding applications must be attached to a return or extension for additional support. Extended U-tops should be specified with a 24"D return or corner worksurface. B Note: Bold line indicates location of rim detail. Arrows on surfaces indicate grain direction. B C A Extended U-Top Worksurfaces 1 9 16" Single Rim Laminate with Laminate Wood Rim Wood A B C H Model (L) (LW) (W) Right-Hand 47 7 8" 71 7 8" 23 7 8" 1 9 16" ST244872WSUE $ 1364 $ 1888 $ 1724 Left-Hand 47 7 8" 71 7 8" 23 7 8" 1 9 16" ST724824WSUE $ 1364 $ 1888 $ 1724 Rim Profiles: Plastic (P) Softened (F) Reed (W) Scalloped (X) Transitional (E) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single Rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 ST244872WSUELW1 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 423 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 D IMPORTANT: Brackets must be specified separately. IMPORTANT: Notice the hand orientation of these surfaces. Side edges are finished to match front rim. Conference area of 30"D P-top worksurface is 42" in diameter; it is 48" in diameter on a 36"D P-top. P-tops used in freestanding applications must be attached to a return or extension for additional support. W W Note: Bold line indicates location of rim detail. Arrows on surfaces indicate grain direction. D P-Top Worksurfaces 1 9 16" Single Rim Laminate with Laminate Wood Rim Wood D W H Model (L) (LW) (W) Right-Hand 29 7 8" 71 7 8" 1 9 16" ST3072WSP $ 1103 $ 1478 $ 1344 35 7 8" 83 7 8" ST3684WSP 1388 1842 1671 Left-Hand 29 7 8" 71 7 8" 1 9 16" ST7230WSP $ 1103 $ 1478 $ 1344 35 7 8" 83 7 8" ST8436WSP 1388 1842 1671 Rim Profiles: Plastic (P) Self Edge (J) Softened (F) Reed (W) Scalloped (X) Transitional (E) Kimball Office Systems Page 424 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim (plastic & wood rims) 11 = Single rim (J rim only) 4 Rim profile: P = Plastic rim (available on laminate surface only) J = Self edge (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood or P rim only) 1 23 4 5 ST3072WSPLW1 F STD 6 7 8 480 STD MC 1 23 4 5 ST3072WSPL11 J STD 6 480 Brackets & Support page 436
Worksurfaces & Support GSA SIN 711-1 D W Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. All edges are finished to match front rim. U-tops used in freestanding applications must be attached to a return or extension for additional support. U-Top Worksurfaces 1 9 16" Single Rim Laminate with Laminate Wood Rim Wood D W H Model (L) (LW) (W) U-Top 29 7 8" 59 7 8" 1 9 16" ST3060WSU $ 672 $ 1026 $ 904 65 7 8" ST3066WSU 728 1074 1000 71 7 8" ST3072WSU 786 1125 1017 35 7 8" 71 7 8" ST3672WSU 884 1232 1102 Rim Profiles: Plastic (P) Self Edge (J) Softened (F) Reed (W) Scalloped (X) Transitional (E) Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim (plastic & wood rims) 11 = Single rim (J rim only) 4 Panel price group (include for D-shape only): C = Cetra 5 Rim profile: P = Plastic rim (available on laminate surface only) J = Self edge (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 6 Surface finish price group: 7 Surface finish designator 8 Rim finish price group (include for laminate with wood rim only): 9 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 5 6 7 ST3060WSUL11 J STD 480 Kimball Office Systems Page 425 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 A C Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Side edges are finished to match the top; wire manager is on the back edges. Return combo dimensions are determined from left to right when seated at the worksurface. B E D Straight Corner Worksurfaces 1 9 16" Wire Manager Laminate with Laminate Wood Rim Wood A B C D E H Model (L) (LW) (W) 24"/24" Return Combo 35 7 8" 35 7 8" 23 7 8" 23 7 8" 16 31 32" 1 9 16" ST24363624WSCS $ 577 $ 647 $ 673 41 7 8" 41 7 8" 25 15 32" ST24424224WSCS 640 704 727 47 7 8" 47 7 8" 33 15 16" ST24484824WSCS 665 805 969 30"/30" Return Combo 41 7 8" 41 7 8" 29 7 8" 29 7 8" 16 31 32" 1 9 16" ST30424230WSCS $ 655 $ 719 $ 746 47 7 8" 47 7 8" 25 15 32" ST30484830WSCS 735 868 1006 Rim Profiles: Plastic (P) Waterfall (K) Softened (F) Reed (W) Scalloped (X) Transitional (E) Kimball Office Systems Page 426 LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager (plastic & wood rims) 31 = Wire manager (K rim only) 4 Rim profile: P = Plastic rim (available on laminate surface only) K = Waterfall rim (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 ST24363624WSCSLW3 F 5 6 7 8 9 STD 480 STD MC 480 1 23 4 ST24363624WSCSL31 K 5 6 9 STD 480 480 Brackets & Support page 436
Worksurfaces & Support GSA SIN 711-1 A C Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. IMPORTANT: Brackets must be specified separately. Side and back edges are finished to match front rim. Return combo dimensions are determined from left to right when seated at the worksurface. B E D Straight Corner Worksurfaces 1 9 16" Single Rim Laminate with Laminate Wood Rim Wood A B C D E H Model (L) (LW) (W) 24"/24" Return Combo 35 7 8" 35 7 8" 23 7 8" 23 7 8" 16 31 32" 1 9 16" ST24363624WSCS $ 561 $ 832 $ 707 41 7 8" 41 7 8" 25 15 32" ST24424224WSCS 617 886 760 47 7 8" 47 7 8" 33 15 16" ST24484824WSCS 705 983 992 30"/30" Return Combo 41 7 8" 41 7 8" 29 7 8" 29 7 8" 16 31 32" 1 9 16" ST30424230WSCS $ 631 $ 900 $ 779 47 7 8" 47 7 8" 25 15 32" ST30484830WSCS 713 1044 1022 Rim Profiles: Plastic (P) Waterfall (K) Softened (F) Reed (W) Scalloped (X) Transitional (E) Kimball Office Systems Page 427 Worksurfaces Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single rim (plastic & wood rims) 11 = Single rim (K rim only) 4 Rim profile: P = Plastic rim (available on laminate surface only) K = Waterfall rim (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 ST24363624WSCSLW1 F 5 6 7 8 STD 480 STD MC 1 23 4 ST24363624WSCSL11 K 5 6 STD 480
Worksurfaces & Support GSA SIN 711-1 A C IMPORTANT: Brackets must be specified separately. Exception: Z brackets are included with split corner worksurfaces. Side edges are finished to match the top; wire manager is on the back edges. Return combo dimensions are determined from left to right when seated at the worksurface. B D Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Arrow on surface indicates grain direction. E Straight Split Corner Worksurfaces 1 9 16" Wire Manager Laminate with Laminate Wood Rim Wood A B C D E H Model (L) (LW) (W) 24"/24" Return Combo 41 7 8" 41 7 8" 23 7 8" 23 7 8" 25 15 32" 1 9 16" ST24424224WSCSS $ 876 $ 937 $ 956 47 7 8" 47 7 8" 33 15 16" ST24484824WSCSS 918 1040 1208 30"/30" Return Combo 47 7 8" 47 7 8" 29 7 8" 29 7 8" 25 15 32" 1 9 16" ST30484830WSCSS $ 977 $ 1073 $ 1239 Rim Profiles: Plastic (P) Waterfall (K) Softened (F) Reed (W) Scalloped (X) Transitional (E) Kimball Office Systems Page 428 Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager (Plastic & wood rims) 31 = Wire manager (K rim only) 4 Rim profile: P = Plastic rim (available on laminate surface only) K = Waterfall rim (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 ST24424224WSCSSLW3 F 5 6 7 8 9 STD 480 STD MC 480 1 23 4 ST24424224WSCSSL31 K 5 6 9 STD 480 480
Worksurfaces & Support GSA SIN 711-1 A C A B Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Grain runs diagonally on 48" x 48" tops and parallel to 60" side on 48" x 60" and 60" x 48" tops. IMPORTANT: Brackets must be specified separately. Side edges are finished to match the top; wire manager is on back edges. Return combo dimensions are determined from left to right when seated at the worksurface. B C A D C B D D Curved Corner Worksurfaces 1 9 16" Wire Manager Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 24"/24" Return Combo 47 7 8" 47 7 8" 23 7 8" 23 7 8" 1 9 16" ST24484824WSCC $ 792 $ 908 $ 1037 47 7 8" 59 7 8" ST24486024WSCC 1058 1331 1324 59 7 8" 47 7 8" ST24604824WSCC 1058 1331 1324 30"/30" Return Combo 47 7 8" 47 7 8" 29 7 8" 29 7 8" 1 9 16" ST30484830WSCC $ 792 $ 908 $ 1037 47 7 8" 59 7 8" ST30486030WSCC 1058 1331 1324 59 7 8" 47 7 8" ST30604830WSCC 1058 1331 1324 24"/30" Return Combo 47 7 8" 47 7 8" 23 7 8" 29 7 8" 1 9 16" ST24484830WSCC $ 792 $ 908 $ 1037 47 7 8" 59 7 8" ST24486030WSCC 1058 1331 1324 59 7 8" 47 7 8" ST24604830WSCC 1058 1331 1324 30"/24" Return Combo 47 7 8" 47 7 8" 29 7 8" 23 7 8" 1 9 16" ST30484824WSCC $ 792 $ 908 $ 1037 47 7 8" 59 7 8" ST30486024WSCC 1058 1331 1324 59 7 8" 47 7 8" ST30604824WSCC 1058 1331 1324 Rim Profiles: Plastic (P) Softened (F) Reed (W) Scalloped (X) Transitional (E) See page Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 3 = Wire manager 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 9 Wire manager finish designator 1 23 4 ST24484824WSCCLW3 F 5 6 7 8 9 STD 480 STD MC 480 Kimball Office Systems Page 429 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 A C B A IMPORTANT: Brackets must be specified separately. Side and back edges are finished to match front rim. Return combo dimensions are determined from left to right when seated at the worksurface. C Note: Bold line indicates location of rim detail; double line indicates location of wire manager. Grain runs diagonally on 48" x 48" tops and parallel to 60" side on 48" x 60" and 60" x 48" tops. D B A C B D D Curved Corner Worksurfaces 1 9 16" Single Rim Laminate with Laminate Wood Rim Wood A B C D H Model (L) (LW) (W) 24"/24" Return Combo 47 7 8" 47 7 8" 23 7 8" 23 7 8" 1 9 16" ST24484824WSCC $ 757 $ 1159 $ 1044 47 7 8" 59 7 8" ST24486024WSCC 1008 1466 1343 59 7 8" 47 7 8" ST24604824WSCC 1008 1466 1343 30"/30" Return Combo 47 7 8" 47 7 8" 29 7 8" 29 7 8" 1 9 16" ST30484830WSCC $ 757 $ 1159 $ 1044 47 7 8" 59 7 8" ST30486030WSCC 1008 1466 1343 59 7 8" 47 7 8" ST30604830WSCC 1008 1466 1343 24"/30" Return Combo 47 7 8" 47 7 8" 23 7 8" 29 7 8" 1 9 16" ST24484830WSCC $ 757 $ 1159 $ 1044 47 7 8" 59 7 8" ST24486030WSCC 1008 1466 1343 59 7 8" 47 7 8" ST24604830WSCC 1008 1466 1343 30"/24" Return Combo 47 7 8" 47 7 8" 29 7 8" 23 7 8" 1 9 16" ST30484824WSCC $ 757 $ 1159 $ 1044 47 7 8" 59 7 8" ST30486024WSCC 1008 1466 1343 59 7 8" 47 7 8" ST30604824WSCC 1008 1466 1343 Rim Profiles: Plastic (P) Softened (F) Reed (W) Scalloped (X) Transitional (E) See page Brackets & Support page 436 LW = Laminate with wood rim W = Wood 3 Rim option: 1 = Single Rim 4 Rim profile: P = Plastic rim (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (include for laminate with wood rim only): 8 Rim finish designator (include for laminate with wood rim or P rim only) 1 23 4 ST24484824WSCCLW1 F 5 6 7 8 STD 480 STD MC Kimball Office Systems Page 430
Worksurfaces & Support GSA SIN 711-1 Transaction Counters For Use with Xsite and Interworks EQ Panels Statement of Line page 330 Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. Laminate D W H Model (L) Straight 15" 23 7 8" 1 3 16" SS1524WSTC $ 184 29 7 8" SS1530WSTC 194 35 7 8" SS1536WSTC 211 41 7 8" SS1542WSTC 226 47 7 8" SS1548WSTC 243 53 7 8" SS1554WSTC 265 59 7 8" SS1560WSTC 292 71 7 8" SS1572WSTC 312 IMPORTANT: Brackets must be specified separately. Specify appropriate transaction counter brackets to coordinate with panel being used. Transaction counters are mounted on top of and supported by panels. Rim detail appears on all four edges. Related Products: Brackets and support components s 436 and 439. Rim Profile: Plastic (P) 3 Rim profile: P = Plastic rim 4 Surface finish price group: 5 Surface finish designator 6 Rim finish designator 1 2 3 4 5 SS1524WSTCL P STD 480 6 462 Kimball Office Systems Page 431 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 Note: Bold line indicates location of rim detail. Arrow on surface indicates grain direction. IMPORTANT: Brackets are included with transaction counters for use with Cetra panels. Soffits must be specified separately. Transaction counters are mounted inside Cetra panels. Transaction counters can only be supported by panels. Transaction counters are unfinished on back edge. Woodgrain runs parallel to surface width. Rim detail appears on the front edge only. Straight transaction worksurfaces may be used on Xsite by specifying Rim detail on back edge through electronic specification tools. Transaction Counters For Use with Cetra Panels Laminate with Laminate with Laminate Waterfall Rim Wood Rim Wood D W H Model (L) (L1) (LW) (W) Straight 12" 60" 1" ST1260WSTC $ 334 $ 334 $ 448 $ 451 72" ST1272WSTC 357 357 503 509 84" ST1284WSTC 389 389 563 568 90" ST1290WSTC 408 408 593 600 96" ST1296WSTC 428 428 622 631 102" ST12102WSTC 464 464 678 718 108" ST12108WSTC 488 488 713 754 120" ST12120WSTC 540 540 766 811 Rim Profiles: Plastic (P) Waterfall (K) Softened (F) Reed (W) Scalloped (X) Transitional (E) Kimball Office Systems Page 432 Related Products: Soffits 433. Statement of Line page 330 L1 = Laminate with waterfall (K) rim LW = Laminate with wood rim W = Wood 3 Rim profile: P = Plastic rim (available on laminate surface only) K = Waterfall rim (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 4 Surface finish price group: 5 Surface finish designator 6 Rim finish price group (omit for P & K rims): 7 Rim finish designator (omit for K rim) 1 2 3 4 ST1260WSTCL P STD 5 6 7 480 STD 480 1 2 3 4 5 ST1260WSTCL1 K STD 480
Worksurfaces & Support GSA SIN 711-1 Transaction Counter Soffits For Use With Cetra Panels Statement of Line page 330 D W H Model Laminate Wood End 11" 1" 2 3 4" ST0111TLS $ 50 $ 62 Straight 1" 60" 2 3 4" ST60TLSS $ 114 $ 152 72" ST72TLSS 133 166 84" ST84TLSS 139 182 90" ST90TLSS 145 189 96" ST96TLSS 160 206 102" ST102TLSS 231 298 108" ST108TLSS 259 332 120" ST120TLSS 272 357 Specify for use under Cetra transaction counters Specify the same nominal size as the transaction counter. Soffits include all necessary mounting hardware. Soffits are recommended to hide task lights, but are not required. W = Wood 3 Surface finish price group: 4 Surface finish designator 1 2 3 4 ST60TLSSL STD 480 Kimball Office Systems Page 433 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 Table Tops 1 3 16" = Kwik Office model available. See the Kwik Office Price List. Statement of Line page 331 Note: Arrow on surface indicates grain direction. D W H Model Price Round Laminate 29 5 8" diameter 1 3 16" SS30TTRNL $ 189 35 5 8" diameter SS36TTRNL 280 41 5 8" diameter SS42TTRNL 346 47 5 8" diameter SS48TTRNL 385 Thermofoil 36" diameter 1 3 16" SS36TTRNT $ 764 42" diameter SS42TTRNT 827 47" diameter SS47TTRNT 921 Square Laminate 29 5 8" 29 5 8" 1 3 16" SS3030TTSQL $ 189 35 5 8" 35 5 8" SS3636TTSQL 280 41 5 8" 41 5 8" SS4242TTSQL 346 Rectangular Laminate 29 5 8" 59 5 8" 1 3 16" SS3060TTRTL $ 425 71 5 8" SS3072TTRTL 526 35 5 8" 59 5 8" SS3660TTRTL 450 71 5 8" SS3672TTRTL 576 Race Track Laminate 35" 59" 1 3 16" SS3660TTRCL $ 479 71" SS3672TTRCL 605 83" SS3684TTRCL 636 Specify support separately. One base is required for round and square tops; two bases are required for rectangular and racetrack tops. Related Products: Support legs and bases s 446, 448 449. Mobile table legs and bases 455. 2 Rim profile: P = Plastic rim (available on laminate models only) S = Sloped rim (available on thermofoil models only) 3 Surface finish price group: STD2 = Group 2 thermofoil (+$60) 4 Surface finish designator 5 Rim finish designator (omit for thermofoil surfaces) 1 2 3 4 5 SS30TTRNL P STD 480 480 Rim Profiles: Kimball Office Systems Page 434 Sloped (S) Plastic (P)
Worksurfaces & Support GSA SIN 711-1 Table Tops 1 9 16" Statement of Line page 331 Note: Arrow on surface indicates grain direction. Specify support separately. One base is required for round top; two bases are required for racetrack top. Related Products: Support legs and bases s 446, 448 449. Mobile table legs and bases 455. Laminate with Laminate Wood Rm Wood D W H Model (L) (LW) (W) Round 36" diameter 1 9 16" ST36TTRN $ 834 $ 1281 $ 1159 42" diameter ST42TTRN 902 1364 1233 48" diameter ST48TTRN 1006 1518 1373 Racetrack 36" 72" 1 9 16" ST3672TTRC $ 1044 $ 1594 $ 1478 Rim Profiles: Plastic (P) Self edge (J) Softened (F) Reed (W) Scalloped (X) Transitional (E) LW = Laminate with wood rim W = Wood 3 Rim price group (omit for all but J rims): 1 = Self edge (J) 4 Rim profile: P = Plastic rim (available on laminate surface only) J = Self edge (available on laminate surface only) F = Wood, softened rim W = Reed rim X = Scalloped rim E = Transitional rim 5 Surface finish price group: 6 Surface finish designator 7 Rim finish price group (omit for P & J rims and wood tops): 8 Rim finish designator (omit for J rim and wood tops) 1 2 4 5 ST36TTRNLW F STD 6 7 8 480 STD MC Kimball Office Systems Page 435 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 Worksurface Support Compatible with Xsite Statement of Line page 332 End-Support Leg Mid-Support Leg Stick Support Leg Flat Bracket Adjustable Mid-Support D W H Model Description Price Adjustable Edge Support End-Support Legs 27 3 4" 29" 36WBSA 336 for appropriate application. $ 16 ( 5 8" increments) Note: Heights are from floor to top of 1 3 16"worksurface. 24" 2 1 2" 27 1 4" 36W2427ES Used with 24"D worksurfaces. $ 295 30" 2 1 2" 27 1 4" 36W3027ES Used with 30"D worksurfaces. 311 Mid-Support Leg 10" 2 1 2" 27 1 4" 36W1027MS Used with 24" and 30 D worksurfaces. $ 261 Stick Support Leg 2 1 2" 27 1 4" 36W0227SS Not for use in freestanding applications. $ 203 Adjustable Mid-Supports 19 3 4" 3 15 16" 27 3 4" 29" 36W1927BCA Used with 24"D worksurfaces at 2H. $ 124 19 3 4" 3 15 16" 40 1 4" 41 1 2" 36W1940BCA Used with 24"D worksurfaces at 3H. 187 25 3 4" 3 15 16" 27 3 4" 29" 36W2527BCA Used with 30"D worksurfaces at 2H. 145 25 3 4" 3 15 16" 40 1 4" 41 1 2" 36W2540BCA Used with 30"D worksurfaces at 3H. 199 ( 5 8" increments) Note: Heights are from floor to top of 1 3 16"worksurface. Flat Bracket 2" 5 1 2" IBF1 Galvanized finish. $ 10 Transaction Counter Support 4 7 16" 5 1 1 16" 36WBTC Specify two brackets for 24" 60"W counters; $ 25 specify four brackets for 66" 72"W counters. IMPORTANT: All supports must be specified separately from worksurface. Adjustable mid-supports are used when placing two worksurfaces end to end or when kneespace exceeds 48". Adjustable midsupport cannot provide support at the end of a worksurface. One flat bracket is required to properly join two flush, adjacent/ perpendicular worksurfaces when an adjustable mid-support or midsupport leg is used; two flat brackets are required to properly secure and support when undersurface support panels or pedestals are used. Top cap must be field modified where transaction counter is used. Worksurface brackets are exposed above the worksurface. 2 Finish price group: STDM = Group M (+10%) 3 Finish designator Standard: Attachment hardware Kimball Office Systems Page 436 1 2 3 36WBSA STD 462 Flat Bracket or Transaction Counter Support
Worksurfaces & Support GSA SIN 711-1 Worksurface Support Compatible with Cetra Panels Statement of Line page 332 ABWR ABWL Model Description Price Edge Support Bracket Right-Hand ABWR For use with Cetra panel-mounted worksurface. Cinder finish. $ 9 Left-Hand ABWL For use with Cetra panel-mounted worksurface. Cinder finish. $ 9 IMPORTANT: Brackets must be specified separately. 338 for proper bracket/support application. Brackets are sold individually, unless otherwise specified. 3" Drop Bracket AZB16A For use with 18"D worksurfaces; 3" drop. Cinder finish. $ 35 AZB22A For use with 24"D worksurfaces; 3" drop. Cinder finish.35 AZB28A For use with 30"D worksurfaces; 3" drop. Cinder finish.35 Flat Bracket IBF1 One bracket. Secures two flush, adjacent/perpendicular $ 10 worksurfaces. Galvanized finish. 2"D x 5 1 2"W. Kimball Office Systems Page 437 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 Worksurface Support Compatible with Cetra Panels, continued D W H Model Description Price Cantilever Bracket Right-Hand 16 1 16" 1 1 8" 16 1 4" ABWC14R For use with Cetra panel-mounted worksurfaces. Cinder finish. $ 64 Left-Hand 16 1 16" 1 1 8" 16 1 4" ABWC14L For use with Cetra panel-mounted worksurfaces. Cinder finish. $ 64 Laminate Wood D W H Model (L) (W) Support Panels 12" 1 1 4" 24 3 4" AE1224 $ 242 $ 408 27 3 4" AE1227 242 408 38 1 32" AE1238 368 617 17 11 16" 24 3 4" AE1824 242 408 27 3 4" AE1827 242 408 38 1 32" AE1838 368 617 23 11 16" 24 3 4" AE2424 307 432 27 3 4" AE2427 307 432 38 1 32" AE2438 459 652 29 11 16" 24 3 4" AE3024 320 458 27 3 4" AE3027 320 458 38 1 32" AE3038 482 681 IMPORTANT: Brackets and support must be specified separately. 338 for proper bracket/support application. Brackets are sold individually, unless otherwise specified. Support Panels W = Wood 3 Finish price group: 4 Finish designator 1 2 3 AE1224L 462 Cantilever Statement of Line page 332 Kimball Office Systems Page 438
Worksurfaces & Support GSA SIN 711-1 Worksurface Support Compatible with Interworks EQ Panels = Kwik Office model available. See the Kwik Office Price List. Statement of Line page 333 Model Description Price Edge Support Bracket Right-Hand IBRWSER For use with Interworks EQ panel-mounted worksurface. Cinder finish. $ 22 Left-Hand IBRWSEL For use with Interworks EQ panel-mounted worksurface. Cinder finish. $ 22 Transaction Counter Bracket Right-Hand IBTCBR1 For use with Interworks EQ panel-mounted transaction counters. $ 23 Left-Hand IBTCBL1 For use with Interworks EQ panel-mounted transaction counters. $ 23 Drop Bracket IB0224D For use with 24"D worksurfaces. 2" drop. Cinder finish. $ 38 IB0230D For use with 30"D worksurfaces. 2" drop. Cinder finish. $ 47 Flat Bracket IBF1 One bracket. Secures two flush, adjacent/perpendicular $ 10 worksurfaces. Galvanized finish. 2"D x 5 1 2"W. IMPORTANT: Brackets must be specified separately. 342 for proper bracket/support application. Brackets are sold individually, unless otherwise noted. Specify two right-hand and two left-hand transaction counter brackets for each surface. Transaction Counter Bracket 2 Finish price group: STDM = Group M (+10%) 3 Finish designator 1 2 3 IBTCBR1 STD 462 Edge Support, Drop, and Flat Brackets Kimball Office Systems Page 439 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 Worksurface Support Compatible with Interworks EQ Panels, continued D W H Model Description Price Cantilever Bracket Right-Hand 21 3 4" 3 1 4" 20" IB24CR For use with Interworks EQ panel-mounted $ 89 worksurface. Cinder finish. Left-Hand 21 3 4" 3 1 4" 20" IB24CL For use with Interworks EQ panel-mounted worksurface. Cinder finish. $ 89 Support Panels Half End Panel 16 1 2" 1 1 4" 27 1 4" IB1827H $ 183 Full End Panel = Kwik Office model available. See the Kwik Office Price List. 23 5 8" 1 1 4" 27 1 4" IB2427F $ 227 29 5 8" IB3027F 276 Standard: Support Panels Brackets to attach to panel and worksurface Two glides IMPORTANT: Brackets and support must be specified separately. 342 for proper bracket/support application. Brackets are sold individually, unless otherwise specified. Specify gusset bracket for use with support panels if additional stability is required. 446. 2 Finish price group (omit for cantilevers): STDM = Group M (+10%) 3 Finish designator (omit for cantilevers): Statement of Line page 333 1 2 3 IB1827H STD 462 Kimball Office Systems Page 440
Worksurfaces & Support GSA SIN 711-1 Worksurface Support Compatible with Traxx Applications = Kwik Office model available. See the Kwik Office Price List. Statement of Line page 334 Model Description Price Traxx Worksurface Bracket IBTWS Single bracket $ 12 IMPORTANT: Brackets must be specified separately. 344 for proper bracket/support application. Kimball Office Systems Page 441 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 Worksurface Support Compatible with Traxx and Freestanding Applications Laminate Wood D W H Model (L) (W) Freestanding End Supports 29 7 8" 11 1 8" 24 3 4" FBT3024 $ 586 $ 669 35 7 8" FBT3624 593 681 47 7 8" FBT4824 658 726 29 7 8" 11 1 8" 27 3 4" FBT3027 589 671 35 7 8" FBT3627 595 692 47 7 8" FBT4827 665 727 Freestanding Corner Supports 47 7 8" 47 7 8" 24 3 4" FBL484824 $ 1347 $ 1452 59 7 8" FBL486024 1455 1526 59 7 8" 47 7 8" FBL604824 1455 1526 47 7 8" 47 7 8" 27 3 4" FBL484827 1383 1508 59 7 8" FBL486027 1494 1581 59 7 8" 47 7 8" FBL604827 1494 1581 Freestanding Undersurface Support Panel 12" 1" 24 3 4" FEP1224 $ 225 $ 319 22 3 4" FEP2324 341 404 28 3 4" FEP2924 378 457 34 3 4" FEP3524 471 567 12" 1" 27 3 4" FEP1227 226 320 22 3 4" FEP2327 366 406 28 3 4" FEP2927 393 458 34 3 4" FEP3527 488 568 IMPORTANT: Supports must be specified separately. s 344 345 for proper bracket/support application. Support panels are sized 1 1 8" less deep than the worksurface to accommodate a modesty. Freestanding undersurface end panels finished on front and back edges. P-tops and U-tops used in freestanding applications must be attached to a return extension for additional support. W = Wood 3 Finish price group: 4 Finish designator Statement of Line page 334 1 2 3 4 FBT3024L STD 480 Kimball Office Systems Page 442
Worksurfaces & Support GSA SIN 711-1 Worksurface Support Compatible with Traxx and Freestanding Applications, continued Statement of Line page 334 D W H Model Laminate (L) Wood (W) Modesty Panel 1" 18 1 16" 24 3 16" FMP1824 $ 242 $ 343 29 13 16" FMP3024 366 384 35 13 16" FMP3624 371 404 41 13 16" FMP4224 399 428 47 13 16" FMP4824 438 447 53 13 16" FMP5424 505 514 59 13 16" FMP6024 534 538 18 1 16" 27 3 16" FMP1827 244 355 29 13 16" FMP3027 369 399 35 13 16" FMP3627 376 412 41 13 16" FMP4227 402 438 47 13 16" FMP4827 447 457 53 13 16" FMP5427 519 520 59 13 16" FMP6027 538 550 65 13 16" FMP6627 576 604 71 13 16" FMP7227 600 619 77 13 16" FMP7827 813 950 83 13 16" FMP8427 823 998 89 13 16" FMP9027 828 1002 95 13 16" FMP9627 834 1010 101 13 16" FMP10227 995 1129 107 13 16" FMP10827 1000 1134 113 13 16" FMP11427 1010 1138 119 13 16" FMP12027 1017 1147 Modesty Filler Strip 1" 1 9 16" 24 3 16" FMFS0124 $ 26 $ 36 27 3 16" FMFS0127 26 36 Kimball Office Systems Page 443 Worksurfaces IMPORTANT: Supports must be specified separately. s 344 345 for proper bracket/support application. If a modesty panel is not used, specify the modesty filler strip which maintains space for cabling behind pedestal while filling the 1 1 8" difference in depth. Grain direction runs horizontal on 60 W or wider woodgrain laminate modesty panels. If using wood modesty and support panels with flat profile metal pedestals with wood fronts to create freestanding desk applications, specify the worksurface to be deeper than the pedestals. 466. W = Wood 3 Finish price group: 4 Finish designator 1 2 3 4 FMP1824L STD 480
Worksurfaces & Support GSA SIN 711-1 Related Products: Gusset bracket 446. Worksurface Support Compatible with Traxx and Freestanding Metal Applications D W H Model Description Price Half End Panels 16 1 2" 1 1 4" 27 1 4" IF1827H Non-handed. $ 183 Full End Panels 22 5 8" 1 1 4" 27 1 4" IF2427F Non-handed. $ 227 28 5 8" IF3027F Non-handed. 276 34 5 8" IF3627F Non-handed. 327 Return Support Panels 7 3 8" 1 1 4" 27 1 4" IF0827RS Non-handed. Use to create 24"D return. $ 80 12" IF1227RS Non-handed. Use to create 30"D return. $ 110 Support Panel 12" 1 1 4" 27 1 4" IF1227WSP Includes filler panel. $ 139 Corner Post = Kwik Office model available. See the Kwik Office Price List. 6 2 3" 6 2 3" 27 1 4" IF0727CP Creates freestanding corner. $ 250 IMPORTANT: All supports must be specified separately. s 344 345 for proper bracket/support application. End/support panels are structural, non-handed. End panels, 12" return support panel, worksurface support panel include two glides. 8" return support panel and corner post include one glide. End panels, support panels and corner post are designed to secure modesty panel. Return or worksurface support panel: Gusset bracket may be specified separately to provide additional support. 2 Surface finish price group: STDM = Group M (+10%) 3 Finish designator Statement of Line page 334 1 2 3 IF1827H STDM 501 Kimball Office Systems Page 444
Worksurfaces & Support GSA SIN 711-1 Worksurface Support Compatible Flat Profile Storage = Kwik Office model available. See the Kwik Office Price List. Statement of Line page 334 Related Products: Model Pedestal Non-Deface Kit Price IFMNDF $ 51 Note: Includes an upper and a lower bracket. Use to mount modesty panel to pedestal without drilling holes in the sides. Environmental Grey finish. D W H Model Price Metal Modesty Panels 1 1 2" 19 1 2" 23" IF2023M $ 120 23 7 8" IF2423M Use with 36"W corner. 120 25 1 2" IF2623M 129 29 7 8" IF3023M Use with 42"W corner. 134 31 1 2" IF3223M 141 33 1 4" IF3423M 141 35 7 8" IF3623M Use with 48"W corner. 141 37 1 2" IF3823M 150 39 7 8" IF4023M 150 41 7 8" IF4223M 157 43 1 2" IF4423M 157 45 1 4" IF4623M 157 47 7 8" IF4823M Use with 60"W corner. 163 49 1 2" IF5023M 163 51 1 4" IF5223M 163 53 7 8" IF5423M 163 55 1 2" IF5623M 168 57 1 4" IF5823M 168 59 7 8" IF6023M 168 63 1 4" IF6423M 177 65 7 8" IF6623M 177 67 1 2" IF6823M 177 69 1 4" IF7023M 187 73 1 2" IF7423M 187 79 1 2" IF8023M 193 81 1 4" IF8223M 193 87 1 4" IF8823M 199 93 1 4" IF9423M 205 IMPORTANT: All supports must be specified separately. 346 for proper bracket/support application. Modesty panels are pre-drilled and attach 4" inset from rear of pedestal or end panel only. Gap between top of modesty panel and underside of worksurface is 1 1 2"; gap from bottom of modesty panel to floor is 3". To determine modesty panel width required, subtract total nominal width of support (pedestals or end panels) from nominal width of worksurface. Example: 72"W worksurface - 30"W support (Two 15"W peds) = 42"W modesty panel required 347 for planning guideline chart. 2 Surface finish price group: STDM = Group M (+10%) 3 Finish designator 1 2 3 IF2023M STDM 501 Kimball Office Systems Page 445 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 Worksurface Support Universal = Kwik Office model available. See the Kwik Office Price List. Statement of Line page 335 D W H Model Description Price Support Panel Bracket Gusset Bracket ABEPS For use as additional support for wood or laminate $ 10 end panels that are not next to a storage component or modesty panel. Black metal. 9 7 8" 9 7 8" FBG One. Non-handed. For use as additional support for $ 25 metal support panel that is not next to a storage component or modesty panel. Diameter H Model Description Price 4" Column Legs Fixed Height 4" 27 3 4" AC2804SFB For use as additional support option. $ 245 Adjustable Height 4" 26 1 2"-30 1 2" IB0427AC For use as additional support option. $ 256 1 1 2" Column Legs (static or mobile) 1 1 2" 27 3 4" AC2802SFB $ 264 Tapered Legs 4" 27 3 4" AC2804STL For use as additional support option. $ 266 Kimball Office Systems Page 446 IMPORTANT: All brackets and supports must be specified separately. 348 for proper bracket/support application. Support Panel Brackets Gusset Bracket or 4" Column Legs 2 Finish price group: STDM = Group M (+10%) 3 Finish designator 1 1 2" Column Legs 2 Static or mobile: S = Static M = Mobile 3 Finish price group: 4 Finish designator 1 2 3 4 AC2802SFB S STD 501 Tapered Legs 2 Finish designator 462 = Cinder 501 = Platinum metallic 514 = Carbon metallic
Worksurfaces & Support GSA SIN 711-1 Worksurface Support Universal, continued Statement of Line page 335 D W H Model Description Price Decorative Support Legs 3" 14" 27 7 8" IB1427D For use as additional support option. $ 423 Decorative support includes glide and carpet gripper. Decorative insert may be specified separately, below. Decorative Support Inserts 1 8" 9" 22 5 8" IB1427DIP Painted insert (for a contrasting paint color). $ 72 Modesty Panels 1" 43 1 2" 11 1 2" IF4412MB For use with 60"W worksurface. $ 151 49 1 2" IF5012MB For use with 66"W worksurface. 158 55 1 2" IF5612MB For use with 72"W worksurface. 165 IMPORTANT: All supports must be specified separately. 348 for proper bracket/support application. Units created using decorative support leg cannot be used freestanding. They must be secured to adjacent worksurface for necessary stability. Gusset bracket used to attach metal modesty panel to worksurface must be specified separately. 446. For contrasting paint color on decorative support leg, specify insert separately. 2 Finish price group: STDM = Group M (+10%) 3 Finish designator 1 2 3 IB1427D STDM 501 Kimball Office Systems Page 447 Worksurfaces
Worksurfaces & Support GSA SIN 711-1 Worksurface Support Universal, continued = Kwik Office model available. See the Kwik Office Price List. Statement of Line page 335 D W H Model Description Paint (P) Chrome (C) X-Bases 26" 26" 27" TBS2627X Available in paint finishes or chrome. $ 495 $ 666 For use with 30" and 36" round and square worksurfaces. Painted model is available on Kwik Office. 34" 34" 27" TBS3427X Available in paint finishes or chrome. 519 754 For use with 42" and 48" round and 42" square worksurfaces. Painted model is available on Kwik Office. T-Base 26" 27" TBS2627T Available in paint finishes or chrome. $ 734 $ 937 For use with rectangular and racetrack worksurfaces. Set of 2. Painted model is available on Kwik Office. IMPORTANT: All brackets and supports must be specified separately. 348 for proper bracket/support application. One X-base is required for use with round or square tops. Two T-bases are required for use with rectangular or racetrack tops. Glides adjustable to 1 2". P = Paint C = Chrome 3 Finish price group (omit for chrome model): STDM = Group M (+10%) 4 Finish designator 1 2 3 4 TBS2627XP STDM 501 Kimball Office Systems Page 448
Worksurfaces & Support GSA SIN 711-1 Worksurface Support Universal, continued Paint Wood Diameter H Model Description (P) (W) Cylinder Base 12" 27 3 4" AB22 For use with P-top, U-top, D-shape and $ 589 $ 589 wedge spanner worksurfaces. 16" 27 3 4" AB32G For use with 48" or less round and racetrack 901 901 table tops. Includes anti-tip weight. Paint Wood W D H Model Description (P) (W) Half-Cylinder Base 22" 16" 27 3 4" ASB52 For use as additional support option. $ 954 $ 954 22" 11" 27 3 4" AB52 For use as additional support option. 853 853 22" 11" 27 3 4" AB52E For use with table tops. 883 883 Includes anti-tip weight. IMPORTANT: All supports must be specified separately. 348 for proper bracket/support application. P = Paint W = Wood 3 Surface finish price group: 4 Finish designator Statement of Line page 335 12 3 4 AB22P STD 462 D D W ASB52 W AB52 and AB52E Kimball Office Systems Page 449 Worksurfaces
Mobile Mobile Statement of Line Overview page 451 Mobile Table Rim Profiles: Sloped Plastic Wood (S) Bullnose Bullnose (N) (N) Tear Drop Mobile Tables Available in fixed-height, adjustableheight, and top-only models. 452 to specify. Rectangular Mobile Tables Available in fixed-height, adjustableheight, and top-only models. 453 to specify. Three rim profiles are available on column-leg mobile tables: sloped, plastic bullnose, wood bullnose. Sloped rim is available on thermofoil tops only. Plastic bullnose is available on laminate tops only; wood bullnose is available on wood tops only. Square Mobile Table Available in adjustable base or top-only models. 454 to specify. Round Mobile Table Available in adjustable base or top-only models. 454 to specify. Quarter Round Mobile Table Available in adjustable base or top-only models. 454 to specify. Tri-Star Mobile Table Available in adjustable base or top-only models. 454 to specify. Sloped Wood Plastic (S) Bullnose Flat (C) (N) Three rim profiles are available on adjustable-base mobile tables: sloped, wood bullnose and plastic flat. Sloped rim is available on thermofoil tops only. Plastic flat is available on laminate tops only; wood bullnose is available on wood tops only. Note: Due to different material composites, wood finishes may vary slightly between the top and the bullnose rim. Mobile Legs and Adjustable Base Mobile legs are available in fixedheight and adjustable-height models. 455 to specify. Kimball Office Systems Page 450
Mobile Mobile Overview Options: Bullnose or sloped rim profiles are available on mobile tables. 450. Column-leg mobile tables are available with fixed-height column legs (29 1 8") or adjustable-height column legs (26 5 8" 30 1 2"). All mobile table models are available in a top-only model to allow attachment of an alternate base in the field or to replace an existing table worksurface. Table tops are 1 3 16" thick. Locking casters are standard on all mobile column legs. Features Adjustable base is for use on table tops that are not larger than 30" in diameter and thicker than 1 3 16". Sloped rim table tops are 3 4" thick and offer a continuous edge that provides a clean, mono - chromatic aesthetic without the change of materials between surface and edge. Adjustable base features a pneumatic adjustment for quick and simple height changes. It includes four locking casters. Height adjustable from 27" 37"H. Cord Management: A variety of accessories may be added in the field to help manage cords and cables, including grommets and undersurface wire managers. See the Perks Price List. Fixed-height and adjustableheight mobile column legs can be specified separately and used with other table tops, including those listed in the worksurfaces section in accordance with the guidelines listed. Kimball Office Systems Page 451 Mobile
Mobile GSA SIN 711-1 Note: Arrow on surface indicates grain direction. Note: Due to different material composites, wood finishes may vary slightly between the top and the bullnose rim. Tear Drop Mobile Tables Thermofoil Laminate Wood D W H Model Description (T) (L) (W) Tear Drop 37 3 8" 37 3 8" 29 1 8" SK1937TPSTA Fixed-height legs $ 899 $ 882 $ 1246 26 5 8" 31 5 8" SK1937TPADJ Adjustable-height legs 1213 1216 1509 1 3 16" SK1937TP Top only 524 482 707 Statement of Line page 450 Overview page 451 All legs include locking casters. T = Thermofoil W = Wood 3 Rim profile: S = Sloped (thermofoil only) N = Bullnose (plastic on laminate surfaces; wood on wood surfaces) 4 Surface finish designator 5 Rim finish designator (laminate surfaces only) 6 Leg finish designator (omit for top only): 462 = Cinder 501 = Platinum Metallic (+10%) 1 23 4 5 SK1937TPSTALN 480 480 6 501 Rim Profiles: Dimensions for Space Planning: (Top only) 1 23 4 5 SK1937TPLN 480 480 Related Products: Cable management See the Perks Price List. Sloped (S) Plastic Bullnose (N) Wood Bullnose (N) 37 3 8" 37 3 8" 18 15 16" Kimball Office Systems Page 452
Mobile GSA SIN 711-1 Note: Arrow on surface indicates grain direction. Note: Due to different material composites, wood finishes may vary slightly between the top and the bullnose rim. Rectangular Mobile Tables Thermofoil Laminate Wood D W H Model Description (T) (L) (W) Rectangular 20 5 16" 46 1 4" 29 1 8" SK2046TRSTA Fixed-height legs $ 796 $ 775 $ 1092 26 5 8" 31 5 8" SK2046TRADJ Adjustable-height legs 1110 1109 1620 1 3 16" SK2046TR Top only 421 375 546 24 7 8" 47 7 8" 29 1 8" SK2548TRSTA Fixed-height legs 876 857 1208 26 5 8" 31 5 8" SK2548TRADJ Adjustable-height legs 1189 1191 1672 1 3 16" SK2548TR Top only 499 458 668 30" 60" 29 1 8" SK3060TRSTA Fixed-height legs 1062 1172 $ 1330 26 5 8" 31 5 8" SK3060TRADJ Adjustable-height legs 1376 1362 1787 1 3 16" SK3060TR Top only 686 620 788 Statement of Line page 450 Overview page 451 All legs include locking casters. T = Thermofoil W = Wood 3 Rim profile: S = Sloped (thermofoil only) N = Bullnose (plastic on laminate surfaces; wood on wood surfaces) 4 Surface finish designator 5 Rim finish designator (laminate surfaces only) 6 Leg finish designator (omit for top only): 462 = Cinder 501 = Platinum Metallic (+10%) 1 23 4 5 SK2046TRSTALN 480 480 6 501 Related Products: Cable management See the Perks Price List. Rim Profiles: Sloped (S) Plastic Bullnose (N) Wood Bullnose (N) (Top only) 1 23 4 5 SK2046TRLN 480 480 Kimball Office Systems Page 453 Mobile
Mobile GSA SIN 711-1 Square, Round, Quarter Round, and Tri-Star Mobile Tables Thermofoil Laminate Wood D W H Model Description (T) (L) (W) Square 24" 24" 27"-37" SK30TQADJ Adjustable base $ 1058 $ 1101 $ 1328 Round 3 4" SK30TQ Top only 398 414 643 30" diameter 27"-37" SK30TDADJ Adjustable base $ 1058 $ 1101 $ 1328 Quarter Round 3 4" SK30TD Top only 398 414 643 22" 30" 27"-37" SK30TUADJ Adjustable base $ 1058 $ 1101 $ 1328 Tri-Star 3 4" SK30TU Top only 398 414 643 25" 27" 27"-37" SK30TSADJ Adjustable base $ 1058 $ 1101 $ 1328 3 4" SK30TS Top only 398 $ 414 $ 643 Statement of Line page 450 Overview page 451 Adjustable base provides 10" adjustment range. Base features four locking casters. Flat plastic edge (C) is available in cinder only. T = Thermofoil W = Wood 3 Rim profile: S = Sloped (thermofoil only) C = Plastic flat (laminate only) N = Bullnose (wood only) 4 Surface finish designator 5 Base finish designator (omit for top): 462 = Cinder 501 = Platinum Metallic (+10%) Note: Arrow on surface indicates grain direction. 1 23 4 5 SK30TQADJTS 480 501 Note: Due to different material composites, wood finishes may vary slightly between the top and the bullnose rim. Rim Profiles: Dimensions for Space Planning: 30" 30" 30" (Top only) 1 23 4 SK30TQTS 480 Sloped (S) Plastic Flat (C) Wood Bullnose (N) 24" 22" 25" 24" 22" 27" Kimball Office Systems Page 454
Mobile GSA SIN 711-1 Mobile Column Legs and Adjustable Base D W H Model Description Price Mobile Column Legs Fixed Height 7 1 2" 7 1 2" 27 15 16" SKLSTA 2 1 8" diameter. Locking caster. One; four required $ 101 to support surface. Cinder and Platinum only. For use with 1 3 16" thick worksurfaces no deeper than 30" and no wider than 60". Adjustable Height 7 1 2" 7 1 2" 25 7 16" 30 1 2" SKLADJ 2 1 8" diameter. Locking caster. One; four required $ 185 to support surface. Cinder and Platinum only. For use with 1 3 16" thick worksurfaces no deeper than 30" and no wider than 60". Statement of Line page 450 Overview page 451 2 Finish designator 462 = Cinder 501 = Platinum metallic (+10%) 1 2 SKBADJ 501 Adjustable Base 26 1 4" 26 1 4" 27" 37" SKBADJ Available in 462 Cinder and 501 Platinum Metallic only. $ 707 For use with table tops not larger than 30" diameter and not thicker than 1 3 16". Kimball Office Systems Page 455 Mobile
Mobile Kimball Office Systems Page 456
Storage Undersurface Storage Profiles: Undersurface Storage Statement of Line Square Profile: Overview page 463 Locking Information page 476 Note: Available in wood or laminate. Square Box/Box/File Pedestals 464 for product info. 479 to specify. File/File Pedestals 464 for product info. 479 to specify. Lateral File Pedestals 464 for product info. 481 to specify. Hinged Door Pedestals 464 for product info. s 480 481 to specify. Radius Flat 458 for Statement of Line. Open Bookcases 464 for product info. 482 to specify. Mobile Box/File Pedestals 464 for product info. 483 to specify. Radius Profile: Note: Available in wood or laminate. Box/Box/File and File/File Pedestals 465 for product info. 484 to specify. Lateral File Pedestals 465 for product info. 485 to specify. Hinged Door Pedestals 465 for product info. 485 to specify. Kimball Office Systems Page 457 Storage
Storage Undersurface Storage Statement of Line, continued Overview page 463 Locking Information page 476 Undersurface Storage Profiles: Flat Profile: Note: Flat profile storage is metal or metal with wood fronts. Square 457 for Statement of Line. Suspended Box/File Pedestals 466 for product info. 486 for metal. Box/Box/File Pedestals 466 for product info. 486 for metal. 487 for metal with wood front. File/File Pedestals 466 for product info. 486 for metal. 487 for metal with wood front. Undersurface Lateral Files 466 for product info. 488 for metal. 489 for metal with wood front. Radius 457 for Statement of Line. Flat File Centers 466 for product info. 488 for metal. 489 for metal with wood front. Bookcases 466 for product info. 488 for metal. Mobile Pedestals Available in cushion top box/file, box/box/file, and file/file models. 466 for product info. 490 for metal. 491 for metal with wood front. Kimball Office Systems Page 458
Overhead Storage Profiles: Storage Overhead Storage Statement of Line Square Profile: Overview page 463 Locking Information page 476 Note: Available in wood or laminate. Square Radius (19"H flipper door model shown) Flipper Door Overheads Available in 19"H and 16"H models. 470 for product info. 492 to specify. Hinged Door Overheads Available in 19"H and 16"H models. 470 for product info. 492 to specify. Glass-Front Overheads 470 for product info. 492 to specify. Overhead Shelves 470 for product info. 493 to specify. Curved Bevel 460. 460. Flat Lunar 460. 460. Highback Organizers with Flipper Doors 470 for product info. 494 to specify. Highback Organizers with Hinged Doors 470 for product info. 494 to specify. Glass Patterns: Radius Profile: Note: Available in wood or laminate. Linear Vertical Frosted Flipper Door Overheads Available in 19"H and 16"H models. 471 for product info. 495 to specify. Hinged Door Overheads Available in 19"H and 16"H models. 471 for product info. 495 to specify. Highback Organizers with Flipper Doors 471 for product info. 496 to specify. Highback Organizers with Hinged Doors 471 for product info. 496 to specify. Kimball Office Systems Page 459 Storage