Boomless lat an s - XT-Boom X Tender The XT introduces boomless spray technology, enabling spray to be targeted into places that conventional booms and other nozzles cannot reach. XT delivers a uniform spray pattern over a distance of up to 16 feet (4.9 m). Ideal for weed control in forests and pastureland. Ideal for applications where a conventional boom cannot be used due to obstacles ommon uses include orchard, vineyard, forestry, pasture, turf and golf course spraying, as well as maintaining rights-of-way and fence rows Excellent low-drift option while extending spray reach Large droplet size reduces spray drift and promotes spray penetration aintains a consistent spray swath over a pressure range of 0-60 psi (-5 bar) Standard models with precision-molded polyacetal nozzle and threaded stainless steel body provide excellent durability and low maintenance US Units (NPT) (PSI) 10 (1/4") 15 (1/4") 0 (1/4") 4 (1/4") 4 (/8") 80 (1/") 167 (/4") 15 (/4") low Gallons per Acre at swath shown GAL/1000 Rate PH (GP) 4 5 6 8 10 1 15 0 4 5 0 0.9 8.9 7.1 5.9 4.5.6.0.4 1.8 0.41 0.7 0.0 0.16 40 1.0 9.9 7.9 6.6 5.0 4.0..6.0 0.45 0.0 0. 0.18 1 50 1.1 10.9 8.7 7. 5.4 4.4.6.9. 0.50 0. 0.5 0.0 60 1. 11.9 9.5 7.9 5.9 4.8 4.0..4 0.55 0.6 0.7 0. 0 1. 10.9 8.7 7. 5.4 4.4.6.9. 0.5 0.5 0.6 0.1 40 1.5 1.5 10.0 8. 6. 5.0 4..4.5 0.61 0.41 0.0 0.4 50 1.7 1.7 11.0 9. 6.9 5.5 4.6.7.8 0.67 0.45 0. 0.7 60 1.8 15.0 1.0 10.0 7.5 6.0 5.0 4.0.0 0.7 0.49 0.7 0.9 Swath (t) at 40 PSI 48 in high 0 1.7 1.6 10.9 9.0 6.8 5.4 4.5.6.7 0.6 0.4 0.1 0.5 40.0 16.0 1.8 10.6 8.0 6.4 5. 4.. 0.7 0.49 0.7 0.9 15 50. 17.6 14.1 11.7 8.8 7.0 5.9 4.7.5 0.81 0.54 0.40 0. 60.4 19. 15. 1.8 9.6 7.7 6.4 5.1.8 0.88 0.59 0.44 0.5 0.1 16. 1.0 10.8 8.1 6.5 5.4 4.. 0.75 0.50 0.7 0.0 40.4 18.6 14.9 1.4 9. 7.4 6. 5.0.7 0.85 0.57 0.4 0.4 16 50.7 0.9 16.7 1.9 10.4 8.4 7.0 5.6 4. 0.96 0.64 0.48 0.8 60.9.4 17.9 15.0 11. 9.0 7.5 6.0 4.5 1.0 0.69 0.51 0.41 0.7 1.6 5. 1.1 15.8 1.6 10.5 8.4 6. 1.45 0.97 0.7 0.58 40 4. 6.7 9.4 4.5 18. 14.7 1. 9.8 7. 1.68 1.1 0.84 0.67 14 50 4.8 41.0.8 7. 0.5 16.4 1.7 10.9 8. 1.88 1.5 0.94 0.75 60 5. 45. 6. 0..6 18.1 15.1 1.1 9.0.08 1.8 1.04 0.8 0 6.9 68. 54.6 45.5 4. 7..8 18. 1.7.14.09 1.57 1.5 40 8.0 79. 6.4 5.8 9.6 1.7 6.4 1.1 15.8.64.4 1.8 1.45 1 50 8.9 88.1 70.5 58.7 44.1 5. 9.4.5 17.6 4.04.70.0 1.6 60 9.8 97.0 77.6 64.7 48.5 8.8. 5.9 19.4 4.45.97. 1.78 0 14.5 18 10 85.4 64.1 51. 4.7 4. 5.6 5.88.9.94.5 40 16.7 148 118 98.4 7.8 59.0 49. 9.4 9.5 6.78 4.5.9.71 15 50 18.7 165 1 110 8.6 66.1 55.1 44.1.1 7.59 5.06.79.0 60 0.5 181 145 11 90.6 7.5 60.4 48. 6. 8. 5.54 4.16. 0 18.6 144 115 95.9 71.9 57.5 48.0 8.4 8.8 6.60 4.40.0.64 40 1.5 166 1 111 8.1 66.5 55.4 44.. 7.6 5.09.8.05 16 50 4.0 186 149 14 9.8 74. 61.9 49.5 7.1 8.5 5.68 4.6.41 60 6. 0 16 16 10 81.4 67.8 54. 40.7 9.4 6. 4.67.7 Typical Pattern Produced by XT Series ommon Uses of the Boom X Tender s 14 Adjustable Swath Width Boom X Tender ing (last nozzle on the boom) Swath width can be increased or decreased by adjusting the angle of the nozzle +/- 18. Boomless ing +/- 18 Boomless ing with enter 188
SPEIALTY SPRAY NOZZLES Boom X Tender nozzles are ideal for boomless spraying or as the last nozzle on a boom. Hypro s Boom X Tender nozzles provide excellent coverage throughout the swath width for superior results. Gasket, insert and o-ring kits available to rebuild NPT versions. etric Units low Rate (NPT) (BAR) (LP) 10 (1/4 inch) 15 (1/4 inch) 0 (1/4 inch) 4 (1/4 inch) 4 (/8 inch) 80 (1/ inch) 167 (/4 inch) 15 (/4 inch) Application Rate L/Ha - at swath shown K/H 4 5 6 7 8 10 1 14 16 18 0 Swath Width () @.76 BAR 1. meters high. 14 99 8 71 6 50 41 5 1 8 5.9 15 11 101 87 76 61 51 4 8 4 0.9 4 4.6 175 140 117 100 88 70 58 50 44 9 5 4.6 16 19 108 9 81 65 54 46 40 6 5.7 198 159 1 11 99 79 66 57 50 44 40 4. 4 6.6 9 18 15 11 114 9 76 65 57 51 46 6.4 01 161 14 115 101 81 67 58 50 45 40 7.9 47 197 165 141 1 99 8 71 6 55 49 4.8 4 9.1 85 8 190 16 14 114 95 81 71 6 57 7.7 7 189 158 15 118 95 79 68 59 5 47 9.5 90 19 166 145 116 97 8 7 64 58 4.9 4 10.9 5 68 191 167 14 11 96 84 74 67 1.9 47 78 15 70 6 189 158 15 118 105 95 17 579 46 86 1 89 19 165 145 19 116 4.4 4 19.6 668 55 446 8 4 67 191 167 149 14 5.8 99 79 661 567 496 97 1 8 48 0 198 1.6 115 97 810 694 607 486 405 47 04 70 4.9 4 6.5 140 11 95 80 701 561 468 401 51 1 81 5.8 1878 150 15 107 99 751 66 57 469 417 76 65.9 00 1840 15 114 1150 90 767 657 575 511 460 4. 4 76.1 656 15 1771 1518 18 106 885 759 664 590 51 69. 1 1697 1414 11 1061 849 707 606 50 471 44 84.9 598 079 17 1485 199 109 866 74 650 577 50 4.9 4 98 000 400 000 1715 1500 100 1000 857 750 667 600 Swath widths and application rates in charts are based on height of 48 inches (1. metres), a different height will give different swath widths GP = GPA x PH x swath width (in) GP = GPA x 5,940 5,940 PH x swath width (in) eatures ommon Use Weeds Pattern Boomless an Technology Pre-Orifice aterial Stainless or Polyacetal 105º Range 0-60 PSI (-5 BAR) onfiguration NPT & astap s astaps NPT (Thread) Parts Kits for NPT version -XT010 XT010 (1/4") XT010-GIOKIT -XT015 - - -XT00 XT00 (1/4") XT00-GIOKIT -XT04 XT04 (1/4") XT04-GIOKIT -XT04 XT04 (/8") XT04-GIOKIT - XT080 (1/") XT080-GIOKIT - XT167 (/4") XT167-GIOKIT - XT15 (/4") XT15-GIOKIT Replacement astap Seal W1164 LP = L/ha x Kmph x swath width (m) L/ha = LP x 600 600 Kmph x swath width (m) odel 9950-00 Description Boom X Tender Tee/ Swivel Kit for use with 1/4" NPT or astcap XT s 189
Acid-Resistant Lo-Drift 110 o The Lo-Drift s two-part construction includes a pre-orifice, which reduces the number of drift prone droplets and makes it ideal for broadcast application of acidic defoliants. Acid-resistant material construction Significantly reduces spray drift, widening the operational window Balanced droplet size for effective, on-target spray US Units low Gallons per Acre 0 inch nozzle spacing GAL/1000 t Rate PH 0 inch nozzle spacing (PSI) (GP) 4 5 6 8 10 1 15 0 4 5 6 7 15 0.18 1.4 10.7 8.9 6.7 5. 4.5.6.7 0.61 0.41 0.1 0.5 0 0.1 15.6 1.5 10.4 7.8 6. 5. 4..1 0.7 0.48 0.6 0.9 0 0.6 19. 15.4 1.9 9.7 7.7 6.4 5.1.9 0.89 0.59 0.44 0.5 0 40 0.0. 17.8 14.9 11.1 8.9 7.4 5.9 4.5 1.0 0.68 0.51 0.41 50 0.4 5. 0. 16.8 1.6 10.1 8.4 6.7 5.0 1.16 0.77 0.58 0.46 60 0.7 7.5.0 18. 1.7 11.0 9. 7. 5.5 1.6 0.84 0.6 0.50 70 0.40 9.7.8 19.8 14.9 11.9 9.9 7.9 5.9 1.6 0.91 0.68 0.55 15 0.4 17.8 14. 11.9 8.9 7.1 5.9 4.8.6 0.8 0.55 0.41 0. 0 0.8 0.8 16.6 1.9 10.4 8. 6.9 5.5 4. 0.95 0.64 0.48 0.8 0 0.5 6.0 0.8 17. 1.0 10.4 8.7 6.9 5. 1.19 0.80 0.60 0.48 04 40 0.40 9.7.8 19.8 14.9 11.9 9.9 7.9 5.9 1.6 0.91 0.68 0.55 50 0.45.4 6.7. 16.7 1.4 11.1 8.9 6.7 1.5 1.0 0.77 0.61 60 0.49 6.4 9.1 4. 18. 14.6 1.1 9.7 7. 1.67 1.11 0.84 0.67 70 0.5 9.4 1.5 6. 19.7 15.7 1.1 10.5 7.9 1.81 1.0 0.90 0.7 15 0.1.0 18.4 15. 11.5 9. 7.7 6.1 4.6 1.06 0.70 0.5 0.4 0 0.5 6.0 0.8 17. 1.0 10.4 8.7 6.9 5. 1.19 0.80 0.60 0.48 0 0.4 1.9 5.5 1. 16.0 1.8 10.6 8.5 6.4 1.47 0.98 0.7 0.59 05 40 0.50 7.1 9.7 4.8 18.6 14.9 1.4 9.9 7.4 1.71 1.14 0.85 0.68 50 0.56 41.6. 7.7 0.8 16.6 1.9 11.1 8. 1.91 1.7 0.95 0.76 60 0.61 45. 6. 0..6 18.1 15.1 1.1 9.1.08 1.9 1.04 0.8 70 0.66 49.0 9..7 4.5 19.6 16. 1.1 9.8.5 1.50 1.1 0.90 V 15 0.7 7.5.0 18. 1.7 11.0 9. 7. 5.5 1.6 0.84 0.6 0.50 0 0.4 1. 4.9 0.8 15.6 1.5 10.4 8. 6. 1.4 0.95 0.7 0.57 0 0.5 8.6 0.9 5.7 19. 15.4 1.9 10. 7.7 1.77 1.18 0.89 0.71 06 40 0.60 44.6 5.6 9.7. 17.8 14.9 11.9 8.9.05 1.6 1.0 0.8 50 0.67 49.7 9.8. 4.9 19.9 16.6 1. 9.9.8 1.5 1.14 0.91 60 0.7 54. 4.4 6.1 7.1 1.7 18.1 14.5 10.8.49 1.66 1.4 1.00 70 0.79 58.7 46.9 9.1 9..5 19.6 15.6 11.7.69 1.80 1.5 1.08 size based on ASABE S57.1 standard. eatures ommon Use Acid Defoliants Pattern Tapered lat an Technology Pre-Orifice aterial PVD 110º Range 15-70 PSI (1-5 BAR) onfiguration s s s 110º 90LD0110 90LD04110 90LD05110 90LD06110 etric Units (BAR) low Rate (LP) Application Rate L/Ha - 50 cm Spacing KH 7 8 10 1 15 0 5 0 1 0,69 118 104 8 69 55 41 8 1,5 0,85 146 18 10 85 68 51 41 4 0,98 168 147 118 98 78 59 47 9 0 1,0 06 180 144 10 96 7 58 48 4 1,9 8 09 167 19 111 8 67 56 5 1,55 66 186 155 14 9 74 6 1 0,9 158 18 110 9 74 55 44 7 1,5 1,1 194 170 16 11 90 68 54 45 1,1 5 197 157 11 105 79 6 5 04 1,60 74 40 19 160 18 96 77 64 4 1,85 17 78 185 148 111 89 74 5,07 55 11 48 07 166 14 99 8 1 1,15 197 17 18 115 9 69 55 46 1,5 1,41 4 1 169 141 11 85 68 56 1,6 79 45 196 16 10 98 78 65 05,00 4 00 40 00 160 10 96 80 4,1 96 47 77 1 185 19 111 9 5,58 44 87 10 58 06 155 14 10 V 1 1,9 8 09 167 19 111 8 67 56 1,5 1,70 91 55 04 170 16 10 8 68 1,96 6 94 5 196 157 118 94 78 06,40 411 60 88 40 19 144 115 96 4,77 475 416 77 166 1 111 5,10 51 465 7 10 48 186 149 14 size based on ASABE S57.1 standard. 190
Sudden Impact High Impact ar Wash 5% WATER SAVINGS! 5X S THE LIE! Sample : TUR4B-.0 Breakdown: TUR 4 B -.0 series material size brass.0 Provides a high impact, controlled rotation 0 water stream with much greater impact and cleaning efficiency than other nozzles which reduces wash time & increases thru-put Lasts up to five times longer than other rotating nozzles on the market, reducing operating costs over the life of the car wash Improved cleaning efficiency over other rotating nozzles reduces water consumption by up to 5% Tungsten carbide seat and nozzle provide unmatched wear and shatter resistance over ceramic material commonly utilized in other nozzles High strength, forged housing available in economical brass or corrosion-resistant 04 stainless steel Elastomer cover protects vehicles and nozzles Precision-machined bearing in rotor offers very high wear resistance and optimal impact Available with 4 pattern for maximum impact or 0 pattern for extra coverage BSP-style connection available in 4 brass (sizes.0,.5, 4.5) for use in ark VII washes SPEIALTY SPRAY NOZZLES Specifications Series * Ideal Impact Distance aterial Temperature TUR4B-x.x 1750 PSI (10 bar) 0-0 (51-76cm) Brass 4 180 (8º ) TUR4B-x.x-BSP 1750 PSI (10 bar) 0"-0" (51-76cm) Brass 4º 180º (8º ) TUR4S-x.x 000 PSI (07 bar) 0-0 (51-76cm) Stainless 4 180 (8º ) TUR0B-x.x 100 PSI (90 bar) 15-5 (8-6cm) Brass 0 180 (8º ) TUR0S-x.x 000 PSI (07 bar) 15-5 (8-6cm) Stainless 0 180 (8º ) *See rate chart below for specific information Dimensional hart Series A (in) A (mm) B (in) B (mm) 1/4 NPT or 1/4" BSP 4.05 77.5 1.49 7.8 0.96 75.6 1.69 4.9 A B low Rate (US GP) low Rate (L/min) (PSI) (BAR) 800 900 1000 1100 100 1500 000 50 500 750 000 50 60 70 80 90 100 10 140 160 180 00.0 0.89 0.95 1.00 1.05 1.10 1. 1.41 1.50 1.58 1.66 1.7.1.51.80 4.06 4.0 4.54 4.97 5.7 5.74 6.09 6.4.0 1.4 1.4 1.50 1.57 1.64 1.84.1.5.7.49.60 4.8 5.9 5.71 6.11 6.48 6.8 7.48 8.08 8.64 9.16 9.66.5 1.57 1.66 1.75 1.84 1.9.14.47.6.77.90.0 5.66 6.0 6.70 7.16 7.59 8.00 8.77 9.47 10.10 10.70 11.0 4.0 1.79 1.90.00.10.19.45.8.00.16..46 6.45 7.07 7.6 8.16 8.66 9.1 9.99 10.80 11.50 1.0 1.90 4.5.01.1.5.6.46.76.18.8.56.7.90 7.4 7.94 8.57 9.16 9.7 10.0 11.0 1.10 1.90 1.70 14.40 5.0.4.7.50.6.74.06.54.75.95 4.15 4. 8.07 8.84 9.55 10.0 10.80 11.40 1.50 1.50 14.40 15.0 16.10 5.5.46.61.75.88.01.7.89 4.1 4.5 4.56 4.76 8.87 9.71 10.40 11.0 11.80 1.50 1.70 14.80 15.80 16.80 17.70 6.0.68.85.00.15.9.67 4.4 4.50 4.74 4.97 5.0 9.66 10.50 11.40 1.0 1.90 1.60 14.90 16.10 17.0 18.0 19.0 Sample TUR 4 B.0 odel aterial Dash Number Turbo (NPT) 4 or 0 B Brass or S Stainless.0,.0,.5, 4.0, 4.5, 5.0, 5.5, 6.0 Turbo (BSP) for ark VII Washes* 4 B Brass.0,.5, 4.5 Note: BSP odels: Add suffix BSP -example TUR4B-.0BSP 191
UAS - eramic High Impact ar Wash 10X S THE LIE OVER STAINLESS! Sample : UAS1/4-5-04 Breakdown: UAS 1/4-5 - 04 model connection spray angle size UAS 1/4 NPT 5º 04 eramic inserts provide up to 10 times the life of hardened stainless steel, maximizing your return on investment and decreasing downtime for nozzle replacement Extra long-life ceramic orifice is nearly diamond-hard to resist wear olded ceramic virtually eliminates chemical and mineral buildup in the orifice area Wear characteristics make the UAS nozzle ideal for reclaim systems The U-shaped outlet provides a high-impact spray without additional inserts Wedge-shaped orifice insert seats tightly as spray pressures increase Precision-machined stainless steel carriers resist corrosion and damage High quality components easily withstand wash pressures of 800 to 5000 psi (55-45 BAR) 1/4 NPT connection fits all common applications Permanent laser-etched part number markings ease identification omes in spray angles of 0, 15, 5, 40 low Rate (US GP) (PSI) 800 900 1000 100 1500 1800 000 500 000 500 4000 4500 5000 015 0.67 0.71 0.75 0.8 0.9 1.01 1.06 1.19 1.0 1.40 1.50 1.59 1.68 0 0.89 0.95 1.00 1.10 1. 1.4 1.41 1.58 1.7 1.87.00.1.4 05 1.1 1.19 1.5 1.7 1.5 1.68 1.77 1.98.17.4.50.65.80 0 1.4 1.4 1.50 1.64 1.84.01.1.7.60.81.00.18.5 05 1.57 1.66 1.75 1.9.14.5.47.77.0.7.50.71.91 04 1.79 1.90.00.19.45.68.8.16.46.74 4.00 4.4 4.47 045.01.1.5.46.76.0.18.56.90 4.1 4.50 4.77 5.0 05.4.7.50.74.06.5.54.95 4. 4.68 5.00 5.0 5.59 055.46.61.75.01.7.69.89 4.5 4.76 5.14 5.50 5.8 6.15 06.68.85.00.9.67 4.0 4.4 4.74 5.0 5.61 6.00 6.6 6.71 065.91.08.5.56.98 4.6 4.60 5.14 5.6 6.08 6.50 6.89 7.7 07.1..50.8 4.9 4.70 4.95 5.5 6.06 6.55 7.00 7.4 7.8 08.58.79 4.00 4.8 4.90 5.7 5.66 6. 6.9 7.48 8.00 8.49 8.94 09 4.0 4.7 4.50 4.9 5.51 6.04 6.6 7.1 7.79 8.4 9.00 9.55 10.06 10 4.47 4.74 5.00 5.48 6.1 6.71 7.07 7.91 8.66 9.5 10.00 10.61 11.18 1 5.7 5.69 6.00 6.57 7.5 8.05 8.49 9.49 10.9 11. 1.00 1.7 1.4 19
HP-High Hardened Stainless Steel Achieves up to 16%* greater impact than competitive high pressure nozzles, making them the best value on the market today Hardened 416 stainless steel, the industry standard for long-life Reliable performance in high pressure applications up to 4000 psi (76 BAR) High impact spray in a tightly formed fan pattern onsistent, even distribution provides uniform cleaning without overlapping Protected outlet design guards the orifice during installation and use Versatile 1/4 and 1/8 NPT connections suit a variety of applications omes in spray angles of 0º, 5º, 15º, 5º, 40º Improved marking for easy identification and replacement *ommissioned with an independent tester SPEIALTY SPRAY NOZZLES Available s** X In Stock X Available ontact actory Sample : HP1/4-504 Degree 0 0 05 04 045 05 055 06 065 07 075 08 085 09 0 X X X X X X X X X X X X 5 X X X X 15 X X X X X X X X X X X X X 5 X X X X X X X X X X X X 40 X X X X X X X X X X X X 0 X X X X X X X X X X X X 5 X X X X 15 X X X X X X X X X X X X 5 X X X X X X X X X X X X 40 X X X X X X X X X X X X **or additional sizes, please contact Technical/Applications at 1-800-445-860 1/8 NPT 1/4 NPT US Units 1/8 NPT 1/4 NPT low Rate (US GP) (PSI) 00 400 500 600 700 800 1000 150 1500 000 500 000 500 4000 0 X X 0.55 0.6 0.71 0.77 0.84 0.89 1.00 1.1 1. 1.41 1.58 1.7 1.87.00 0 X X 0.8 0.95 1.60 1.16 1.5 1.4 1.50 1.68 1.84.1.7.06.81.00 05 X X 0.96 1.11 1.4 1.6 1.46 1.57 1.75 1.96.14.47.77.0.7.50 04 X X 1.10 1.6 1.41 1.55 1.67 1.79.00.4.45.8.16.46.74 4.00 045 X X 1. 1.4 1.59 1.74 1.88.01.5.5.76.18.56.90 4.1 4.50 05 X X 1.7 1.58 1.77 1.94.09.4.50.80.06.54.95 4. 4.68 5.00 055 X X 1.51 1.74 1.94.1.0.46.75.07.7.89 4.5 4.76 5.14 5.50 06 X X 1.64 1.90.1..51.68.00.5.67 4.4 4.74 5.0 5.61 6.00 065 X X 1.78.06.0.5.7.91.5.68.98 4.60 5.14 5.6 6.08 6.50 07 X X 1.9.1.47.71.9.1.50.91 4.9 4.95 5.5 6.06 6.55 7.00 075 X X.05.7.65.90.14.5.75 4.19 4.59 5.0 5.9 6.50 7.0 7.50 08 X X.19.5.8.10.5.58 4.00 4.47 4.90 5.66 6. 6.9 7.48 8.00 085 X..69.01.9.56.80 4.5 4.75 5.1 6.01 6.7 7.6 7.95 8.50 09 X.46.85.18.49.76 4.0 4.50 5.0 5.51 6.6 7.1 7.79 8.4 9.00 etric Units 1/8 NPT 1/4 NPT low Rate (L/min) (BAR) 15 0 0 40 50 60 70 80 100 150 00 0 X X 1.77.04.50.88..5.81 4.08 4.56 5.58 6.45 0 X X.65.06.75 4. 4.84 5.0 5.7 6.1 6.84 8.8 9.67 05 X X.09.57 4.7 5.05 5.64 6.18 6.67 7.14 7.98 9.77 11.0 04 X X.5 4.08 4.99 5.77 6.45 7.06 7.6 8.16 9.1 11.10 1.80 045 X X.97 4.59 5.6 6.49 7.5 7.95 8.58 9.17 10.0 1.50 14.50 05 X X 4.41 5.10 6.4 7.1 8.06 8.8 9.54 10.10 11.40 1.90 16.10 055 X X 4.86 5.61 6.87 7.9 8.86 9.71 10.40 11.0 1.50 15.0 17.70 06 X X 5.0 6.1 7.49 8.65 9.67 10.50 11.40 1.0 1.60 16.70 19.0 065 X X 5.74 6.6 8.1 9.7 10.40 11.40 1.40 1.0 14.80 18.10 0.90 07 X X 6.18 7.14 8.74 10.00 11.0 1.0 1.0 14.0 15.90 19.50.50 075 X X 6.6 7.65 9.6 10.80 1.00 1.0 14.0 15.0 17.10 0.90 4.10 08 X X 7.06 8.16 9.99 11.50 1.80 14.10 15.0 16.0 18.0.0 5.70 085 X 7.50 8.66 10.60 1.0 1.70 15.00 16.0 17.0 19.0.70 7.40 09 X 7.95 9.17 11.0 1.90 14.50 15.80 17.10 18.0 0.50 5.10 9.00 19 Breakdown: HP 1/4-5 - 04 model connection spray angle size HP 1/4 NPT 5º 04
ar Wash Kits Save time by not having to order each replacement tip individually, just order one part number for your model of car wash to receive the entire replacement kit. When you install Hypro spray tips, your wash will be brought back to life with increased performance, making your car wash better than new! Washworld High Velocity Arch & Under arriage Kits ar Wash Kits Kit Description Quantity ontains: HPWWHV HPWWHVU UASWWHV UASWWHVU Wash World High Velocity Arch s, Hardened Stainless Steel Wash World High Velocity Under-arriage s, Hardened Stainless Steel Wash World High Velocity Arch s, Premium eramic Orifice Wash World High Velocity Under-arriage s, Premium eramic Orifice 1 HP1/4-400 1 HP1/4-50 14 HP1/4-1504 HP1/4-1505 1 HP1/4-4004 7 HP1/4-1508 4 HP1/4-400 1 UAS1/4-40-0 1 UAS1/4-5-0 14 UAS1/4-15-04 UAS1/4-15-05 1 UAS1/4-40-04 7 UAS1/4-15-08 4 UAS1/4-40-0 PDQ Laser 4000 Kits ar Wash Kits Kit Description Quantity ontains: UASPDQ4000 HPPDQ4000 D&S 5000 T, Super 5000 & Quicksilver, Arch & Wheel Blaster Kits ar Wash Kits Kit Description Quantity ontains: HPDS5000 HPDSQ0WB PDQ Laser 4000 Stainless/ eramic s PDQ Laser 4000 Arch 1/4 Hardened Stainless Steel s D&S 5000, Super 5000, Quicksilver 8 GP Arch s D&S Quicksilver Wheel Blaster Option s 11 UAS1/4-15-04 5 UAS1/4-15-05 1 UAS1/4-5-0 1 UAS1/4-40-0 11 HP1/4-1504 5 HP1/4-1505 1 HP1/4-50 1 HP1/4-400 4 HP1/4-0508 4 HP1/4-0509 4 HP1/4-150 4 HP1/4-504 6 HP1/4-507 6 HP1/4-4006 4 HP1/8-00065 4 HP1/8-0504 194
P-ulcoJet ull one US Units Thread olor one low Rate (Gallons per inute) of Water at 68º (PSI) 10 0 0 40 50 60 70 80 90 100 15 150 90A1P1.0 1/8 NPT Orange 45º 0.10 0.14 0.16 0.19 0.1 0. 0.4 0.5 0.7 0.8 0.1 0.4 90A1P1.5 1/8 NPT Red 55º 0.15 0.0 0.5 0.8 0.1 0.4 0.6 0.8 0.40 0.4 0.47 0.51 90A1P.0 1/8 NPT Light Blue 60º 0.0 0.7 0. 0.7 0.41 0.45 0.48 0.51 0.54 0.56 0.6 0.68 Precision-molded orifice provides accurate and consistent full cone spray pattern Widely used 1/8 and 1/4 NPT or 1/8" and 1/4" BSP connections Available in a variety of standard flow and cone angle options to fit application requirements olor coded by flow rate to simplify nozzle installation and replacement Excellent wear and chemically-resistant Solef Polyvinylidene luoride (PVD) polymer Ideal for low pressure rinsing, washing, coating, cooling, and additive application Sample : 90A1P.0 Breakdown: 90 A1 P.0 material thread family nozzle size 90 = PVD A1 = 1/8 NPT P see table A = 1/4 NPT B1 = 1/8 BSP B = 1/4 BSP SPEIALTY SPRAY NOZZLES 90A1P.0 1/8 NPT Lime Green 50º 0.0 0.41 0.49 0.56 0.6 0.67 0.7 0.76 0.81 0.85 0.9 1.01 90A1P.5 1/8 NPT Terracotta 60º 0.5 0.48 0.57 0.65 0.7 0.78 0.84 0.89 0.94 0.99 1.09 1.18 90A1P5.0 1/8 NPT Blue 80º 0.50 0.68 0.8 0.9 1.0 1.1 1.0 1.7 1.4 1.41 1.56 1.69 90AP6.5 1/4 NPT Purple 50º 0.65 0.89 1.07 1.1 1.4 1.46 1.56 1.66 1.75 1.8.0.0 90AP10 1/4 NPT Olive Green 70º 1.00 1.7 1.64 1.87.06.4.40.55.69.8.1.8 etric Units Thread olor one @ 1 Bar low Rate (L/min) of Water at 0 (BAR 0.5 1 4 5 7 10 90B1P1 1/8 BSP Orange 45 0. 0.46 0.64 0.79 0.91 1.0 1.1 1.44 90B1P1.W 1/8 BSP Natural 90 0.4 0.59 0.84 1.0 1.19 1. 1.57 1.87 90B1P1.5 1/8 BSP Red 55 0.48 0.68 0.97 1.18 1.7 1.5 1.81.16 90B1P 1/8 BSP Light Blue 60 0.64 0.91 1.9 1.58 1.8.04.41.88 90B1PW 1/8 BSP Light Blue 90 0.64 0.91 1.9 1.58 1.8.04.41.88 90B1P 1/8 BSP Lime Green 50 0.97 1.7 1.9.7.74.06.6 4. 90B1P.5 1/8 BSP Terracotta 60 1.1 1.60.6.76.19.57 4. 5.05 90B1P.7W 1/8 BSP Gray 10 1.19 1.69.9.9.7.77 4.46 5. 90B1P5 1/8 BSP Blue 80 1.61.8..95 4.56 5.10 6.0 7.1 90BP6.5 1/4 BSP Purple 50.10.96 4.19 5.1 5.9 6.6 7.84 9.7 90BP10 1/4 BSP Olive Green 70. 4.56 6.45 7.90 9.1 10.1 1.0 14.4 195
anjet - lat an PVD ost popular selling nozzle for lower pressure car wash applications hemically-resistant Polyvinylidene luoride (PVD) polymer s up to 500 PSI Available spray angles ranging from 0, 5, 40, 65, 80 One-piece male 1/4 NPT and 1/4" or 1/8" BSP Hex body prevents distortion of the orifice and provides quick and easy installation Part number is molded into front of nozzle Available s* Degree 01 015 0 05 0 04 05 06 07 08 10 15 0 0 40 50 1/4 NPT X Available ontact actory 0º X X X X X X X X X X 5º X X X X X X X X X X X X X 40º X X X X X X X X X X X X X X 65º X X X X X X X X X X X X X X X X 80º X X X X X X X X X X X X X *or additional sizes, please contact Technical/Applications at 1-800-445-860 Sample : 90A04E80 Breakdown: 90 A 04 E 80 material thread model nozzle pattern 90 = PVD A1 = 1/8 NPT NPT size even fan A1 = 1/8 NPT B1 = 1/8" BSP B = 1/4" BSP fan angle degrees low Rate, (US GP) (PSI) olor 0 40 50 60 70 80 100 150 00 00 400 500 01 Gray 0.09 0.10 0.11 0.1 0.1 0.14 0.16 0.19 0. 0.7 0. 0.5 015 Gray 0.1 0.15 0.17 0.18 0.0 0.1 0.4 0.9 0.4 0.41 0.47 0.5 0 Gray 0.17 0.0 0. 0.4 0.6 0.8 0. 0.9 0.45 0.55 0.6 0.71 05 Gray 0. 0.5 0.8 0.1 0. 0.5 0.40 0.48 0.56 0.68 0.79 0.88 0 Gray 0.6 0.0 0.4 0.7 0.40 0.4 0.47 0.58 0.67 0.8 0.95 1.06 04 Gray 0.5 0.40 0.45 0.49 0.5 0.57 0.6 0.77 0.89 1.10 1.6 1.41 05 Gray 0.4 0.50 0.56 0.61 0.66 0.71 0.79 0.97 1.1 1.7 1.58 1.77 06 Gray 0.5 0.60 0.67 0.7 0.79 0.85 0.95 1.16 1.4 1.64 1.90.1 07 Gray 0.61 0.70 0.78 0.86 0.9 0.99 1.11 1.6 1.57 1.9.1.47 08 Gray 0.69 0.80 0.89 0.98 1.06 1.1 1.6 1.55 1.79.19.5.8 10 Gray 0.87 1.00 1.1 1. 1. 1.41 1.58 1.94.4.74.16.54 15 Gray 1.0 1.50 1.68 1.84 1.98.1.7.90.5 4.11 4.74 5.0 0 Gray 1.7.00.4.45.65.8.16.87 4.47 5.48 6. 7.07 0 Gray.60.00.5.67.97 4.4 4.74 5.81 6.71 8. 9.49 10.61 40 Gray.46 4.00 4.47 4.90 5.9 5.66 6. 7.75 8.94 10.95 1.65 14.14 50 Gray 4. 5.00 5.59 6.1 6.61 7.07 7.91 9.68 11.18 1.69 15.81 17.68 low rate, (L/min) (BAR) olor 0.5 1 4 5 7 0 Gray 0. 0.46 0.65 0.80 0.9 1.0 1. 0 Gray 0.49 0.69 0.98 1.0 1.9 1.55 1.8 04 Gray 0.65 0.9 1.1 1.60 1.85.07.44 05 Gray 0.8 1.15 1.6.00.1.58.06 06 Gray 0.98 1.9 1.96.40.77.10.67 08 Gray 1.1 1.85.61.0.70 4.1 4.89 10 Gray 1.6.1.7 4.00 4.6 5.16 6.11 15 Gray.45.46 4.90 6.00 6.9 7.75 9.17 0 Gray.7 4.6 6.5 8.00 9.4 10. 1. 0 Gray 4.90 6.9 9.80 1.0 1.8 15.4 18. 40 Gray 6.5 9.4 1.0 16.0 18.4 0.6 4.4 50 Gray 8.16 11.5 16. 0.0.0 5.8 0.5 196
isting s -, HA, P, AD, A The Hypro range of misting nozzles produce a high percentage of droplets smaller than 50 microns making the sprays suitable for humidification and evaporative cooling. They are chemically resistant to also allow use with pesticides, disinfectants, and odor control agents as well as dust suppression. A variety of connection options match most applications orrosion-resistant construction Strainers are included on many models to extend service life Anti-drip checks are standard in P and AD models SPEIALTY SPRAY NOZZLES langed s: -lat an olor US gal/hr @ pressure (PSI) L/hr@ pressure (bar) Only 40 60 75 100 150 4 6 8 10 White 65.89.54.96 4.57 5.60 11,59 1,8 16,9 18,9 1,16 65-005 Olive Green 80 4.00 4.90 5.48 6. 7.75 16,04 18,5,68 6,19 9,8 80-0067 langed s: HA-Hollow one US gal/hr @ pressure (PSI) L/hr@ pressure (bar) olor 40 60 75 100 150 4 6 8 10 Only White 110 1.00 1. 1.7 1.58 1.94 4,01 4,6 5,67 6,55 7, 0HA01110 ream 65 1.00 1. 1.7 1.58 1.94 4,01 4,6 5,67 6,55 7, 0HA01-65 int Green 80 1.4 1.75 1.96.6.77 5,7 6,6 8,10 9,6 10,46 0HA01480 White 70 1.51 1.85.07.9.9 6,05 6,99 8,56 9,88 11,05 0HA01570 ommon Use Pattern Technology aterial eatures ooling & Humidification an or Hollow one Elliptical Orifice or Swirl Polyacetal 65-110º Range onfiguration 40-150 PSI (-10 BAR) s, Push-fit, or NPT Retaining Nuts for langed Tips 510WH 510GY 510BL Description /8 inch BSP Retaining Nut White Polypropylene /8 inch BSP Retaining Nut Gray Polypropylene /8 inch BSP Retaining Nut Black Polypropylene 197
isting Accessories Push-fit Anti-drip : P-Hollow one /8 olor US gal/hr @ pressure (PSI) L/hr@ pressure (bar) 40 60 75 100 150 4 6 8 10 with up Strainer White 80 0.91 1.11 1.5 1.44 1.76,65 4,1 5,16 5,96 6,66 0PA008-80 Black 80 0.91 1.11 1.5 1.44 1.76,65 4,1 5,16 5,96 6,66 0PA008-80BL White 105 1.7 1.56 1.74.01.46 5,09 5,88 7,0 8,1 9,9 0PA01-105 Black 105 1.7 1.56 1.74.01.46 5,09 5,88 7,0 8,1 9,9 0PA01-105BL 1 isting Accessories for Push-it Anti-drip s Reference Number Description 1 195Q69 Push-in Porous Plastic 50 esh Post ilter 141418 Barbed Tee 1 8 inch NPT x 1 4 inch Barbs Black (6 mm) 10AEE9000 Barbed Tee 1 8 inch NPT x 1 4 inch Barbs White (6 mm) 8818 Barbed Tee 1 8 inch NPT x 8 inch Barbs Black (6 mm) 11S18 Push-in Tee 1 inch SLIP x 1 inch SLIP x 1 8 inch () 1/8 NPT Anti-drip : AD-Hollow one olor US gal/hr @ pressure (PSI) L/hr@ pressure (bar) 40 60 75 100 150 4 6 8 10 Only with up Strainer Gray 80 0.7 0.88 0.99 1.14 1.9,89,4 4,09 4,7 5,8 01AD0.7-80 S01AD0.7-80 ream 105 1.0 1.47 1.64 1.90. 4,81 5,55 6,80 7,85 8,78 01AD1.-105 S01AD1.-105 Blue 100 1.68.06.0.66.5 6,74 7,78 9,5 11,01 1,1 01AD1.6-100 - 1/8 NPT : A-Hollow one olor US gal/hr @ pressure (PSI) L/hr@ pressure (bar) 40 60 75 100 150 4 6 8 10 Only with SS up Strainer with SS Post Strainer with Plastic ilter White 65 0.48 0.59 0.66 0.76 0.9 1,9,,7,14,51 01A0.4-65 S01A0.4-65 01AUSA0.5 PP01A0.4-65 Gray 80 0.7 0.88 0.99 1.14 1.9,89,4 4,09 4,7 5,8 01A0.7-80 S01A0.7-80 01AUSA1.0 PP01A0.7-80 White 80 0.7 0.88 0.99 1.14 1.9,89,4 4,09 4,7 5,8 01A0.7-80W S01N-W 01N-W PP01A0.7-80W ream 105 1.0 1.47 1.64 1.90. 4,81 5,55 6,80 7,85 8,78 01A1.-105 S01A1.-105 01AUSA.0 PP01A1.-105 Blue 100 1.68.06.0.66.5 6,74 7,78 9,5 11,01 1,1 01A1.6-100 S01A1.6-100 01AUSA.0 PP01A1.6-100 Yellow 70 5.00 6.1 6.85 7.91 9.68 0,05,15 8,5,74 6,61 01A5.0-70 - - - 1 isting Accessories for 1/8 NPT Reference Number Description 1 10000 up Strainer 00 esh (its Rear of Threaded isting s) PIA50 Push-in 00 esh Post Strainer 710161 8 inch BSP x 1 inch Wet Boom Body 198
lat an s - Even 80 o or Knapsack/Backpack ers The Hypro Even lat an spray nozzle creates a consistent pattern that is ideal for single nozzle applications. ommonly used with knapsack sprayers for precise control 80º angle distributes a medium fine spray evenly across the swath ixed droplet spectrum is ideal for all targets One piece design SPEIALTY SPRAY NOZZLES US Units Width 0 in height (in) Width 50 cm height (m) (PSI) (BAR) low Rate (GP) low Rate (LP) Gallons per Acre (Single Applications) PH 1 4 0.0 0.086 15. 7.6 5.1.8 01 80 4 0.0 0.098 17. 8.7 5.8 4. 40.0 0.106 18.7 9.4 6. 4.7 0.0 0.19.9 11.5 7.6 5.7 015 80 4 0.0 0.145 5.7 1.9 8.6 6.4 40.0 0.159 8.1 14.0 9.4 7.0 0.0 0.17 0.5 15. 10. 7.6 0 80 4 0.0 0.19 4.1 17.1 11.4 8.5 40.0 0.11 7.4 18.7 1.5 9.4 0.0 0.59 45.8.9 15. 11.5 0 80 4 0.0 0.91 51.4 5.7 17.1 1.9 40.0 0.17 56.1 8.1 18.7 14.0 size based on ASABE S57.1 standard. Application rates shown reflect single nozzle applications at walking speeds. etric Units Application Rate L/ha (Single Applications) K/H 4 5 01 0.7 117 78 58 47 80 0.8.5 0.70 1 88 66 5 0.400 14 95 7 57 015 0.490 175 117 88 70 80 0.8.5 0.550 197 11 98 79 0.600 15 14 107 86 0 0.65 4 156 117 9 80 0.8.5 0.70 61 174 10 104 0.800 86 191 14 114 0 0.980 50 4 175 140 80 0.8.5 1.100 9 6 197 157 1.00 49 86 15 17 size based on ASABE S57.1 standard. Application rates shown reflect single nozzle applications at walking speeds. eatures ommon Use Knapsack Pattern Even lat an Technology Elliptical Orifice aterial Polyacetal 80º Range 0-40 PSI (- BAR) onfiguration s s 80º aps (5 Pack) E80-01 AP00-01 E80-015 AP00-015 E80-0 AP00-0 E80-0 AP00-0 199
US Units: DeflectTip V Width 0 in height (in) (PSI) low Rate (GP) Gallons per Acre (Single Application) PH 1 4 10.0 0.05 8.8 4.4.9. DT0.5 80º 4 @ 40 PSI 0.0 0.0 0.07 0.09 1.4 15.9 6. 8.0 4.1 5..1 4.0 40.0 0.10 17.7 8.8 5.9 4.4 X 10.0 0.08 10.9 5.4.6.7 DT0.75 95º 44 @ 40 PSI 0.0 0.0 0.11 0.1 15.0 17.7 7.5 8.8 5.0 5.9.7 4.4 40.0 0.15 0.4 10. 6.8 5.1 10.0 0.10 11.4 5.7.8.8 DT1.0 105º 5 @ 40 PSI 0.0 0.0 0.14 0.17 16.0 19.4 8.0 9.7 5. 6.5 4.0 4.8 40.0 0.0.8 11.4 7.6 5.7 10.0 0.15 17.1 8.5 5.7 4. DT1.5 105º 5 @ 40 PSI 0.0 0.0 0.1 0.6.9 9.6 1.0 14.8 8.0 9.9 6.0 7.4 40.0 0.0 4. 17.1 11.4 8.5 size is based on ASABE S57.1 standard. etric Units: DeflectTip ASABE Width 50 cm height (m) Width 0 in height (in) (BAR) (PSI) low Rate (LP) low Rate (GP) Application Rate L/ha (Single Application) K/H 4 5 DT0.5 80º 0.8 @ BAR 1 0. 0. 0.9 81 115 141 54 77 94 41 58 71 46 56 DT0.75 95º 1.1 @ BAR 0.48 0.59 1 16 89 109 66 81 5 65 1 0.4 94 6 47 8 DT1.0 105º 1. @ BAR 0.64 0.79 148 18 99 11 74 91 59 7 1 0.46 105 70 5 4 DT1.5 1 0.68 157 105 79 6 105º 1. @ BAR 0.97 148 111 89 1.18 7 18 16 109 size is based on ASABE S57.1 standard. US Units: PoliJet DeflecTip and PoliJet 5 o -17 o or Knapsack/Backpack ers The DeflecTip and PoliJet wide-angle flood fan nozzle creates a wide pattern at very low pressures while creating mainly medium and coarse droplets. It is well suited for sprayers using very low pressures, including manual sprayers. Different spray angles offer a choice of swath widths PoliJet nozzles are designed for knapsack applications, giving a low drift, course, even spray ircular orifice reduces the chances of blocking Gallons per Acre (Single Application) PH 1 4 AN0.6 5º 0 @ 40 PSI 10.0 0.0 40.0 0.16 0. 0.7 47. 66.7 81.7.6.4 40.9 15.7. 7. 11.8 16.7 0.4 AN1. 90º 40 @ 40 PSI 0.0 40.0 0.45 0.55 66.5 81.5. 40.7. 7. 16.6 0.4 10.0 0. 47.0.5 15.7 11.8 AN1.8 11º 60 @ 40 PSI 0.0 40.0 0.67 0.8 66.7 81.7. 40.8. 7. 16.7 0.4 10.0 0.48 47..6 15.7 11.8 AN.4 10.0 0.6 46.9.5 15.6 11.7 17º 80 @ 40 PSI 0.0 0.90 66...1 16.6 40.0 1.10 81. 40.6 7.1 0. size is based on ASABE S57.1 standard. eatures ommon Use Knapsack Pattern lood Technology Deflection aterial Polyacetal 5º-17º Range 15-45 PSI (1- BAR) onfiguration DT s s aps (5 Pack) 0DT0.5 AP0-0 0DT0.75 AP0-0 0DT1.0 AP0-0 0DT1.5 AP0-0 AN s s aps (5 Pack) 0AN0.6 AP0-0 0AN01. AP0-0 0AN01.8 AP0-0 0AN0.4 AP0-0 etric Units: PoliJet BP Width 50 cm height (m) (BAR) low Rate (LP) Application Rate L/ha (Single Application) K/H 4 5 AN0.6 5º 0.5 @ BAR 1 0.60 61 41 181 0.85 144 511 40 55 04 1.04 65 417 1 50 AN1. 90º 1.0 @ BAR 1.70.08 509 64 9 416 55 1 04 49 1 1.0 60 40 180 144 AN1.8 11º 1.5 @ BAR.55.1 510 65 40 417 55 1 04 50 1 1.80 61 41 180 144 AN.4 1.40 59 9 179 144 17º.0 @ BAR.9 508 8 54 0 4.16 6 415 1 49 BP ODING INE EDIU OARSE BP droplet size based on BP standard. Application rates shown reflect single nozzle applications at walking speeds. 00