fsfdfsdfsdfssfsf OMNI DIFFUSER

fsfdfsdfsdfssfsf OMNI DIFFUSER

Architectural Ceiling Diffusers diffusers OMNI The Titus OMNI diffuser satisfies architectural as well as engineering criteria. Its strong, clean, unobtrusive lines harmonize with the ceiling system, without sacrificing performance. The curvature of the OMNI backpan works with the formed edges of the face panel to deliver a uniform 360 horizontal air pattern, without excessive noise or pressure drop The OMNI diffuser is an excellent choice for variable air volume systems. The air pattern remains tight and horizontal for effective room air distribution, even when the volume varies over a wide range. The face panel is constructed from 22-gauge steel. The edges of the face panel are formed to a radius for a solid, crisp appearance. The formed edges also stiffen the face panel and assure a straight and level surface. OMNI Redefine your comfort zone www.titus-hvac.com metric sizes retrofit MRI compatible woodgrains open ceiling F The Titus AR mobile app is available for download on most Android devices and ios AVAILABLE MODELS: OMNI / Steel FINISHES Standard Finish - #26 #RAL Whit 9010 / 9016 OVERVIEW Square Plaque The Titus OMNI (steel plaque) face diffusers that satisfie architectural and engineering criteria. Their strong, clean, unobtrusive lines harmonize with ceiling systems without sacrificing performance. The curvature of the OMNI backpans work with the formed edges of the face panel to deliver a uniform 360 degree horizontal air pattern, without excessive noise or pressure drop. They are an excellent selection for variable air volume systems. ADDITIONAL FEATURES The formed edges of the face panel capture another 22-gauge steelthat the hanger brackets are mechanically fastened to. This process provides the OMNI face with a smooth finish under any lighting conditions. See website for Specifications OMNI diffusers installed in the ceiling of a country club The face panel is held in place by four hook brackets that positively engage into slots in the backpan. The panel can be removed from the backpan for easy installation of the diffuser or for access to the optional damper. The new face panel construction ensures a smooth, clean appearance and easier installation and removal Optional factory-insulated R-6 foil-backed insulation available for 24 x 24" full face models, neck sizes 6-15, borders 1, 2, 3 and 4 OMNI / OMNI-AA

DIMENSIONS diffusers Redefine your comfort zone www.titus-hvac.com OMNI DIMENSIONS Frame Type 3 (Lay-In) Full Face Ceiling Module A Nominal Round Duct Size B B minus ⅛" C D ¼" E Ceiling Module A minus ¼" Inlet View Inlet View Showing Flex Duct Connection and T-Bars by Others DIMENSIONS Ceiling Module A 12 x 12 (note 2) 20 x 20 24 x 24 Nominal Round Duct Size B Note 1: Adapter is provided for sizes 4 and 5 Note 2: 12 x 12" module is available in steel only C D E 4, 5 (note 1) 2 7 /8 4 6, 7 1 1 /8 2¼ 8 1¼ 2 3 /8 4, 5 (note 1) 2¾ 5¼ 6, 8, 10 ¾ 3¼ 6, 8 1¼ 3¾ 10, 12, 14, 15 1 3 /8 3 7 /8 9 13 5 /8 18 F1 All dimensions are in inches

DIMENSIONS diffusers ADDITIONAL FRAME TYPES Frame Type 1 (Surface Mount) Full Face Ceiling Module A plus 1¼" Ceiling Module A minus 1" ⅛" Frame Type 2 (Snap-In) Full Face or Panel Mounted Ceiling Module A 13 /16" Frame Type 4 (Spline) Full Face or Panel Mounted Ceiling Module A ⅜" ⅜" Mounting Hardware by others Redefine your comfort zone www.titus-hvac.com Frame Type 4V - (Recessed Spline) - Full Face Frame Type 4T - (Clip-On Recessed Spline) - Full Face Ceiling Module A Cable Support Hole Recessed Spline Tile Ceiling Module A Cable Support Hole Clip-On Recessed Spline Tile ½" 1 1 /8" ¼" ¼" Note: If Border 4V is adjacent to a light fixture a gap will be visible above the backpan. A T-bar extender is available to fill this void, available from the ceiling manufacturer. Borders 4V and 4T have four mounting clips. Two clips on opposed sides with holes to attach mounting wire from above. OPTIONAL DIRECTIONAL BLOW CLIPS Available Model: DB DB Clips to Rods Converts OMNI diffuser from standard 4-way blow to 1-, 2- or 3-way Clips attach to hanger brackets on upper face of center panel Center Panel DIMENSIONS All dimensions are in inches

DIMENSIONS diffusers Redefine your comfort zone www.titus-hvac.com OPTIONAL MOLDED INSULATION BLANKET Duct Size plus 2 Duct Size R-6 Fiberglass Insulation is R-6 where blanket has the most depth. One inch clearance on each side of neck is left for insulated duct connection. 24 x 24" full face models only. REMOVING AND REPLACING FACE PANEL - ADJUSTING OPTIONAL DAMPER 1. Installing Face Panel 1. Insert the hook brackets into the slots in the backpan 2. Rotate the face panel clockwise until... 3. The hooks positively engage in the secondary slots in the backpan 2. Removing Face Panel 1. Lift the faceplate towards the backpan to disengage the hook brackets from the backpan slots 2. Rotate the faceplate counterclockwise 3. Lower the faceplate away from the backpan DIMENSIONS 3. Adjusting Optional Damper 1. Remove face panel as above 2. Use flat blade screwdriver to turn operator shaft at center of damper 3. Replace face panel All dimensions are in inches

TITUS Metric Performance Data Omni OMNI 300 mm x 300 mm Module Size Neck Velocity, m/s 2.0 2.5 3.0 3.6 4.1 4.6 5.1 6.1 7.1 Velocity Pressure, Pa 2 4 6 8 10 13 16 22 30 Air Flow, l/s 16 21 25 29 33 37 41 49 58 SIZE Total Pressure, Pa 8 13 19 26 33 42 52 75 102 4 Throw, m 0.3-0.5-1 0.3-0.5-1.3 0.5-0.5-1.5 0.5-1 - 1.8 0.5-1 - 1.8 0.5-1.3-2.3 1-1.3-2.5 1-1.5-3 1.3-1.8-3.3 NC ( Noise Criteria ) - - 12 17 21 24 27 33 38 Air Flow, l/s 26 32 39 45 51 58 64 77 90 SIZE Total Pressure, Pa 10 16 23 31 40 51 63 90 123 5 Throw, m 0.5-0.5-1.5 0.5-1 - 1.8 0.5-1 - 2.3 1-1.3-2.5 1-1.5-2.8 1-1.5-3 1.3-1.8-3.8 1.5-2.3-4.3 1.5-2.5-4.5 NC ( Noise Criteria ) - - 12 17 21 24 28 33 38 Air Flow, l/s 37 46 56 65 74 83 93 111 130 SIZE Total Pressure, Pa 12 19 27 37 48 61 75 109 148 6 Throw, m 0.5-1 - 1.8 1-1.3-2.5 1-1.5-2.8 1.3-1.5-3.3 1.3-1.8-3.8 1.5-2.3-4.3 1.5-2.5-4.5 1.8-2.8-5.3 2.3-3.3-5.5 NC ( Noise Criteria ) - - 12 17 21 24 28 33 38 Air Flow, l/s 50 63 76 88 101 113 126 151 176 SIZE Total Pressure, Pa 14 23 33 44 58 73 91 130 178 7 Throw, m 1-1.3-2.5 1-1.5-2.8 1.3-1.8-3.3 1.3-2.3-4 1.5-2.5-4.5 1.8-2.8-5.3 1.8-2.8-5.5 2.5-3.3-6 2.8-4 - 6.5 NC ( Noise Criteria ) - - 12 17 21 24 28 33 38 Air Flow, l/s 66 82 99 115 132 148 165 198 231 SIZE Total Pressure, Pa 17 27 39 53 69 88 108 156 212 8 Throw, m 1-1.5-2.8 1.3-1.8-3.3 1.5-2.3-4.3 1.5-2.5-5 1.8-2.8-5.5 2.3-3 - 5.8 2.5-3.3-6 2.8-4.3-6.8 3.3-5 - 7.3 NC ( Noise Criteria ) - - 12 17 21 24 28 33 38 600 mm x 600 mm Module Size Neck Velocity, m/s 2.0 2.5 3.0 3.6 4.1 4.6 5.1 6.1 7.1 Velocity Pressure, Pa 2 4 6 8 10 13 16 22 30 Air Flow, l/s 37 46 56 65 74 83 93 111 130 SIZE Total Pressure, Pa 3 4 6 8 11 14 17 25 34 6 Throw, m 0.3-0.3-1.3 0.3-0.5-1.3 0.3-1 - 1.5 0.5-1 - 1.8 0.5-1.3-2.3 1-1.3-2.5 1-1.3-2.8 1.3-1.5-3.3 1.3-1.8-3.3 NC ( Noise Criteria ) - - - - 13 17 21 28 34 Air Flow, l/s 66 82 99 115 132 148 165 198 231 SIZE Total Pressure, Pa 4 7 10 14 18 23 28 40 55 8 Throw, m 0.5-1 - 1.8 0.5-1.3-2.3 1-1.3-2.8 1-1.5-3 1.3-1.8-3.8 1.3-1.8-3.8 1.5-2.3-4 1.8-2.8-4.3 2.3-3 - 4.5 NC ( Noise Criteria ) - - - 12 17 21 25 32 38 Air Flow, l/s 103 129 154 180 206 231 257 309 360 SIZE Total Pressure, Pa 7 10 15 20 27 34 42 60 82 10 Throw, m 1-1.3-2.5 1-1.5-3 1.3-1.8-3.8 1.5-2.3-4 1.5-2.5-4.3 1.8-2.8-4.5 2.3-3 - 5 2.5-3.8-5.5 3-4 - 5.8 NC ( Noise Criteria ) - - - 15 20 24 28 35 41 Air Flow, l/s 148 185 222 259 296 333 370 445 519 SIZE Total Pressure, Pa 9 15 21 29 37 47 59 84 115 12 Throw, m 1.3-1.5-3.3 1.5-2.3-4.3 1.5-2.5-4.5 1.8-2.8-5 2.3-3.3-5.3 2.5-3.8-5.5 2.8-4.3-5.8 3.3-4.5-6.5 4-5 - 7 NC ( Noise Criteria ) - - 12 18 23 27 31 38 43 Air Flow, l/s 202 252 303 353 404 454 505 605 706 SIZE Total Pressure, Pa 13 20 28 38 50 64 79 113 154 14 Throw, m 1.3-2.3-4 1.8-2.5-5 2.3-3 - 5.3 2.5-3.8-5.8 2.8-4 - 6 3-4.5-6.5 3.3-5 - 7 4-5.3-7.5 4.5-5.8-8.3 NC ( Noise Criteria ) - - 14 20 25 29 33 40 45 Air Flow, l/s 232 290 347 405 463 521 579 695 811 SIZE Total Pressure, Pa 14 22 32 44 57 73 90 129 176 15 Throw, m 1.5-2.3-4.5 1.8-2.8-5.3 2.3-3.3-5.8 2.8-4 - 6 3-4.5-6.8 3.3-5 - 7 3.8-5.3-7.3 4.5-5.8-8 5.3-6 - 8.8 NC ( Noise Criteria ) - - 15 21 26 30 34 41 46 * Data were obtained from test conducted in accordance with ANSI / ASHRAE Standard 70-1991. * Throw values are given for terminal velocities of.8,.5, and.3 mps. * Throw Values are given for Isothermal Conditions * N.C. values are based on Octave Band 2-7 sound power levels minus a room absorption of 10dB. * Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10dB, re 10-12 Watts. * Dash (-) in space denotes an N.C. value of less than 10. * All pressures are given in pascals Note: All dimensions are nominal product will be built to the closest inch equivalent dimension unless specially ordered to true metric contact factory for availability of sizes TITUS All rights reserved. No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, or by an information storage system, without permission in writing from TITUS

Submittal D-MOMNI Architectural Ceiling Di Steel Architectural Square Panel Horizontal Air Pattern Model: OMNI Round Neck Inlet View Showing Flex Duct Connection and T-Bars by Others Frame Type 3 (Lay-In) Full Face. For other border types, please see next page. Ceiling Module A 305 x 305 Nominal Round Duct Sizes B * Adapter is provided for Sizes 102 and 127. C D E 102,127* 73 102 152, 178 29 57 203 32 60 229 610 x 610 152, 203 32 95 457 254,305,356, 381 35 98 All dimensions are in millimeters. (Please see reverse side.) D-35.0-S

Other Available Border Types Check selection Frame Type 1 (Surface Mount) Full Face Frame Type 4 (Spline) Full Face or Panel Mounted Frame Type 2 (Snap-In) Full Face or Panel Mounted Note: *Adapter is provided for sizes 102 and 127. Ceiling Module Face Size Nominal Round Duct Sizes Frame Types 305 x 305 305 x 305 102,127*,152,178,203 1, 2, 3, 4 610 x 610 610 x 610 152, 178, 254, 305,356,381 1, 2, 3, 4 Installing and Removing Face Panel Adjusting Optional Damper Installing Face Panel 1. Insert the hook brackets into the slots in the backpan. 2. Rotate the face panel clockwise until... 3. the hooks positively engage in the secondardy slots in the backpan. Removing Face Panel 1. Lift the faceplate towards the backpan to disengage the hook brackets from the backpan slots 2. Rotate the faceplate counter-clockwise 3. Lower the faceplate away from the backpan. Adjusting Optional Damper 1. Remove face panel as above. 2. Use flat blade screwdriver to turn operator shaft at center of damper. 3. Replace face panel. 2

Accessories (Optional) Check if provided Model D-75 Radial Opposed Blade Damper Model EG Equalizing Grid Model AG-75 Radial Opposed Blade Damper Model EG Equalizing Grid Model D-75 damper is available in duct sizes 152 thru 305mm only. Model AG-75 damper is available in 152, thru 381mm duct sizes only. Size B 152-305 38 356, 381 54 Model AG-85 Butterfly Damper Model EG Equalizing Grid Model AG-65 Combination Damper and Equalizing Grid Model D-100 Radial Slide Blade Damper Model EG Equalizing Grid Model AG-100 Radial Sliding Blade Damper Model EG Equalizing Grid Model D-100 damper is available in duct sizes 152, 203, 254, 305 and 356mm duct sizes only. Model AG-100 damper is available in duct sizes 152, 203, 254, 305 and 356mm duct sizes only DB - Optional Blank Offs TRM TITUS Rapid Mount Frame For Surface Mounting Border Type 3 (Please see reverse side.) 3

Submittal D-MOMNI 2-28-13 Accessories (Optional) Continued Dimension A in millimeters, for Dampers Shown Accessories Nominal Round Duct Sizes 6 7 8 10 12 14 15 D-75 60 73 83 105 124 N/A N/A AG-75 70 83 92 114 2 137 70 76 AG-85 64 76 89 114 140 165 178 AG-65 86 102 114 140 181 219 229 D-100 N/A AG-100 N/A Notes and Model D-100 and AG-100 dampers have radial blades that slide in a horizontal plane. For that reason, no opening clearance A is dimensioned. Other Accessories (Optional) Model SB Sectorizing Check if provided Standard Finish: #RAL Color 9010 / 9016 Note: This submittal is meant to demonstrate general dimensions of this product. The drawings on this submittal are not meant to detail every aspect of the product with exactness. Drawings are not to scale. TITUS reserves the right to make changes without written notice. All rights reserved. No part of this work may be reproduced or transmitted in any form or any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system without permission in writing from Air Distribution Technologies