Rotary limit switches FCR FGR series Rotary control switches with 00mm rods from up to positions. Control switches with rotary gear from up to 00 rpm with or micro switches.
0 Rotary limit switches FCR series for control circuits IP GENERL CHRCTERISTICS ELECTRICL CHRCTERISTICS Self extinguishing thermoplastic housing VO UL9 IP protection rating according to IEC/EN 09 mbient temperature: operating - + C storage -0 +0 C Material class II, Pollution class according to IEC/EN09 Slow break positive opening double gap contacts No. cable entry, Ø Comply with IEC/EN09-, UL0 Certifications IMQ, CCC, GOST, UL Rated insulation voltage Ui Rated impulse withstand voltage Uimp Rated thermal current Ith Frequency Rated operating current: C - C C -phase -pole Rated short circuit withstand current (gg 0- V kv Hz 90V 0V /kw 00V /kw 90V fuses) k 90 0/0 / /, DESCRIPTION For single-speed motor control -position FCR00 -position FCR00 -position rotary FCR00 -position rotary FCR00 -position rotary -position FCR00 For two-speed motor control WIRING DIGRM No. 9. 0.9 90 FCR00 00 WIRING DIGRM WIRING DIGRM WIRING DIGRM WITH MECHNICL INTERLOCK WITH MECHNICL INTERLOCK 00 Ø.. 9 Ø. -90 0 +90 SINGLE-SPEED -90 0 +90 0 90 0 0 WIRING DIGRM WIRING DIGRM WIRING DIGRM SINGLE-SPEED WITH MECHNICL INTERLOCK 0 90 0 0 0 90 0 0-0 -90 0 +90 +0 TWO-SPEED
Rotary gear limit switches FGR series for control circuits IP GENERL CHRCTERISTICS This range is aimed at the control of rotating parts: crane rope drums, machinery, etc. They are supplied with a micro,adjustable by a tool, to set the contacts to open and close independent from one another according to the different requirements. The FGR..B version is supplied with a coaxial shaft to use an encoder. Die cast main body with self extinguishing thermoplastic cover VO IP protection rating according to IEC/EN 09 Galvanised steel worm gear with ball bearings P control cams with central stainless steel shaft mounted on ball bearings Cams and micrometric adjustment screws in P Maximum number of operating contacts ( cams) No. cable entries with M0 cable glands Operating temperature - C + 0 C ELECTRICL CHRCTERISTICS Comply with IEC/EN 0-, UL 0 Certifications IMQ, CCC, GOST, UL Recognized NC+NO changeover switches (C form) Snap action contacts with positive opening NC contact Self cleaning silver alloy contacts Rated insulation voltage Ui 0V Rated thermal current Rated operating current: resistive load Ie -0V ac inductive load Ie -0V ac IEC/EN 0- ()-0V ac, UL 0-0Vac STNDRD VERSION CM/MOTORSHFT REV RTIO With micro switches With micro switches WEIGHT gr MIN. PCK QTY. / / /0 /00 /00 FGR00 FGR00 FGR00 FGR009 FGR00 FGR00 FGR00 FGR00 FGR009 FGR00.00.00.00.00.00 COXIL SHFT VERSION CM/MOTORSHFT REV RTIO With micro switches With micro switches WEIGHT gr MIN. PCK QTY. / / /0 /00 /00 FGR00B FGR00B FGR00B FGR009B FGR00B FGR00B FGR00B FGR00B FGR009B FGR00B.00.00.00.00.00
Rotary gear limit switches FGR series for control circuits IP TRIP DIMENSIONS The trip refer to the action of the cam on contact - (NC) of the micro-switches B C D E F CM No. CM No. CM No. CM No. CM No. CM No. Contacts: Open Close NOTE: all micro-switches have changeover contacts a b c d e f - Flange fixing version - Twin shaft version RPM revs revs 0 revs 00 revs 00 revs,, 0 0 a 0, 9, 90 0 B, 0 0 0 REVOLUTIONS REFERRED TO THE CMS CTIVTION b C c D d E e 9, 0 0 0, 0, 0 0,, 0 0 0 0 0 9 0 0 0,, 0 00,, 0 00 F, 0 0 0 f, 0 0 0 CCESSORIES The FLG flange in P, the Oldham coupling in PC reinforced with GF can be used on the main shaft.
programmable control systems safety remote controls rotary limit switches control pendants cabled controls general purpose radio controls foot switches PO BOX BRENDLE QLD 00 USTRLI (t) + 9 99 (f) + 9 90 (e) support@industryiq.com.au (w)