1 Modular line 1/ Regulator 5..5 3..3 1..1 3,5 1 7 INLET PRESSURE = 1 (1 ),3,,5 1,5 3 1 8 17,5 1 15 1 Regulator * Sensitive high performance model with rolling diaphragm; high stability with low load losses and big flow rate. * Can be wall mounted using the relative holes or a bracket. * Lockable safety knob. * Built-in overpressure relieving function. * Pressure ranges:, 8 (standard), 1,5,,,8 (standard), 1,5 * Maximum inlet pressure: 1, (1, ). * Temperature range: 5 5 C (1 1 F). * Gauge connection: G1/8. * Max. torque inserts G1/ IN-OUT: 5 N m. * Reference flow rate (P=,3 - p=1 ): 85 Nl/min. * Weight:,15 Kg. REGULATION FEATURES CONSTANT FLOW RATE= dm 3 /s( Nl/m).,3 5.5 3..3. 1.1,5,....8 8 1. 1 INLET PRESSURE 8 7.8.7 RELIEVING PERFORMANCES,3 5 3..3..1..5,5,.1. 1.3 18..5 3 15
Modular line 1/ Filter Filter 1..8 PRESSURE DROP....1.8..., 5 FILTERING ELEMENT = MICRONS,,3,5 8,3 5 1,5 75 1, 1,8 15 1, 5 15 * High level of condensate separation. * Low pressure drop. * Can be wall mounted using the relative holes. * Filtering degree: 5 micron and micron (standard). * Manual and semiautomatic condensate drainage in the integrated (SS) or float type automatic version (SA). * Bowl available in two configurations: transparent toughened polyamide or with outer bowl guard. * Collected quantity of condensate: cc. * Maximum operating pressure: 1, (1, ). * Temperature range: 5 5 C (1 F). * Max. torque inserts G1/ IN-OUT: 5 N m. * Reference flow rate (P=1 - p=1 ): 15 Nl/min. * Weight:,95 Kg. 1
Modular line 1/ Microfilter PRESSURE DROP 1..8....1.8... FILTRATION EFFICIENCY OF 99,99 % WITH PARTICLES OF,1 MICRONS.5 3 1. 1.5 9,5,,3 Coalescent Cartdridge. 1.5 15 3. 18 Coalescent oil-proof microfilter Essential in circuits where oil is not permitted. * Coalescent cartridge made in microfiber, allows an high filtration efficiency of 99,99% on,1 micron particles. * Can be wall mounted using the relative holes. * Manual and semiautomatic condensate drainage in the integrated (SS) or float type automatic version (SA). * Bowl available in two configurations: transparent toughened poliamide or with outer bowl guard. * It is advisable to install a filter with 5 micron element, to consent long-lasting of coalescent cartridge. * Maximum operating pressure: 1, (1, ). * Temperature range: 5 5 C (1 1 F). * Max. torque inserts G1/ IN-OUT: 5 N m. * Reference flow rate (P=,3 - p=1 ): 195 Nl/min. * Weight:,95 Kg. FUNCTIONING The air with impurity enter into the special cartridge with high efficiency, that stop solid particles, capture and join outside particles of oil and condensate (coalescent effect). In this way, they easily fall down at the bottom of the bowl, where condensate is discharged. Filtered air obtained is without solid and liquid parts. 17
Modular line 1/ Lubricator Lubricator PRESSURE DROP 1..1.8.8......,3 375,5,,3 1,5 75 18,8 5 15 115 31,3 1875 1, 37,5 5 Proportional oil mist type. * Constantly steady delivery. * Suction ensured even with low flow rates. * Sensitive lubricant flow adjustment. * 3 drip display. * Oil fill plug. * Can be wall mounted using the relative holes. * Bowl available in two configurations: transparent toughened polyamide or with outer bowl guard. * Bowl capacity: cc. * Recommended oil viscosity ISO VG3. * Maximum operating pressure: 1, (1, ). * Temperature range: 5 5 C (1 1 F). * Max. torque inserts G1/ IN-OUT: 5 N m. * Reference flow rate (P=1 - p=1 ): Nl/min. * Weight:,95 Kg. MINIMUM OPERATING FLOW Inlet Pressure Minimum Air Flow Psi dm 3 /s (ANR) Nl/1' (ANR) SCFM 3,5,5,3.77 58,,,3.9 91,3,3,5 3 1.5 18
Modular line 1/ Lubricator VL Automatic filling lubricator 1..1.8.8. PRESSURE DROP.....,3 375,5,,3 1,5 75 18,8 5 15 115 31,3 1875 1, 37,5 5 Essential when the oil must be quickly and safety loaded without interrupting the normal operation of the system. * Filling is achieved by keeping the button at the base of the lubricator casing depressed. This provokes a vacuum inside the bowl enabling the oil to be intaken. * The flow will only interrupt when the button is released. * The oil level must be visually inspected. * Minimum attivation pressure: 3 (,3 ). * Other functional features as standard model. * Reference flow rate (P=1 - p=1 ): Nl/min. * Weight:,1 Kg. MINIMUM OPERATING FLOW Inlet Pressure Minimum Air Flow Psi dm 3 /s (ANR) Nl/1' (ANR) SCFM 3,5,5,3.77 58,,,3.9 91,3,3,5 3 1.5 19
1 Modular line 1/ Filter regulator 5 3 1..5..3..1 5..5 3,5 1 INLET PRESSURE = 1 (1 ),3,,5 7 1,5 3 1 8 REGULATION FEATURES CONSTANT FLOW RATE= dm 3 /s( Nl/m),3 17,5 1 15 1 Filter regulator * Sensitive high performance model with rolling diaphragm; high stability with low load losses and big flow rate. * Can be wall mounted using the relative holes or on brackets. * Lockable safety knob. * Built-in overpressure relieving function. * High level of condensate separation. * Pressure ranges:, 8 (standard), 1,5,,,8 (standard), 1,5 * Filtering degree: 5 micron and micron (standard). * Manual and semiautomatic condensate drainage in the integrated (SS) or float type automatic version (SA). * Bowl available in two configurations: transparent toughened polyamide or with outer bowl guard. * Collected quantity of condensate cc. * Maximum operating pressure 1, (1, ). * Temperature range 5 5 C (1 1 F). * Max. torque inserts G1/ IN-OUT: 5 N m. * Reference flow rate (P=,3 - p=1 ): 85 Nl/min. * Weight:,1 Kg. 3..3.,5, 1.1....8 8 1. 1 INLET PRESSURE 8 7.8.7 RELIEVING PERFORMANCES,3 5 3..3..1..5,5,.1. 1.3 18..5 3
Modular line 1/ 3 Way on-off valve 1 8 1,,8,,,.5 7 9 5,3,,5 13.5 81 18 18.5 135 1, 7 1 3 Way on-off valve with lock Used to shut off the air supply while relieving the downstream circuit. * The block device is particularly useful during maintenance operations. It prevents the system from being accidentally or wrongly pressurized. * It can be wall mounted using the relative holes. * Discharge connection: G 1/8. * Maximum inlet pressure: 1, (1, ). * Temperature range: 5 5 C (1 1 F). * The device is equipped with 1 lock. * Max. torque inserts G1/ IN-OUT: 5 N m. * Reference flow rate (P=1 - p=1 ): 157 Nl/min. * Weight:,155 Kg. 1
Modular line 1/ Shut-off valve Shut-off valve 1 8 1,,8,,,.5 7,3, 9 5 13.5 81 18 18.5 135 1, 7 1 Device used to shut off the air supply while relieving the downstream circuit by a remote electric control. * Available with MICROSOL type or in compliance with CNOMO standards (to be ordered separately). * Available with remote pneumatic control. * It can be wall mounted using the relative holes. * Discharge connection: G1/8". * Minimum pressure admitted: 3 (,3 ). * Maximum working pressure: 1 (1 ). * Temperature range: 5 5 C (1 1 F). * Max. torque inserts G1/ IN-OUT: 5 N m. * Reference flow rate (P=1 - p=1 ): 157 Nl/min. * Weight:,189 Kg. Microsol Control Cnomo Control Pneumatic Control
Modular line 1/ Slow start valve Slow start valve 1 8 1,,8,,,.5 7,3, 9 5 13.5 81 18 18.5 135 1, 7 1 Gradually pressurizes the system until reaching the set operating pressure value. * Before delivering the maximum available pressure, the air is allowed to slowly flow around the downstream circuit until about % of the pressure is reached upstream. * Use the built-in flow governor to establish the pressurizing time. * It can be wall mounted using the relative holes. * Minimum pressure admitted: 3 (,3 ). * Maximum working pressure: 1 (1 ). * Temperature range: 5 5 C (1 1 F). * Max. torque inserts G1/ IN-OUT: 5 N m. * Reference flow rate (P=1 - p=1 ): 157 Nl/min. * Weight:,13 Kg. 3
Modular line 1/ Assembling system The new line is characterized by a high versatility thanks to the double assembling system. Infact, the usual UNIT ASSEMBLING KIT (see picture 1) is utilized for assembling standard combined units such as FR+L, V3+FR+L, F+R+L, F+L e F+MF. Besides being really practical and functional, this unit assembling kit reduces to the minimum the assembled unit overall dimensions. Whereas, the BATTERY ASSEMBLING KIT (see picture ) is utilized for assembling particularly complex groups. This battery assembling kit, which is preassembled on single standard products, allows the realization of innumerable combinations so as to actually meet the most demanding application requirements. Fig.1 Fig. Battery assembling kit T bracket kit Lubricator Slow start valve Shut-off valve Filter regulator 3 way on-off valve with lock
Modular line 1/ Order Code Guide to references FR 8 S Line Special Type V = Vacuum loading Product R = Regulator F = Filter L = Lubricator FR = Filter regulator Drain S = Manual and semi-automatic (standard) A = Automatic V3 = 3 Way on-off valve SV = Shut-off valve AVP = Slow start valve Connection = 1/ Filtering element 5 = 5 micron = micron 1 =,1 micron Range of pressure = 8 = 8 1 = 1 Regulator R R R 8 R R 1 R Regulator 1/" Regulator 1/" 8 Regulator 1/" 1 Lubricator L L V Lubricator 1/" Lubricator 1/" - Vacuum loading Filter F S F A F 5 S F 5 A Filter 1/" mic Semi Filter 1/" mic Auto Filter 1/" 5mic Semi Filter 1/" 5mic Auto Filter regulator FR R S FR 8 R S FR 1 R S FR 5 R S FR 5 8 R S FR 5 1 R S FR R A FR 8 R A FR 1 R A FR 5 R A FR 5 8 R A FR 5 1 R A Filter/Reg. 1/" mic Semi Filter/Reg. 1/" mic 8 Semi Filter/Reg. 1/" mic 1 Semi Filter/Reg. 1/" 5mic Semi Filter/Reg. 1/" 5mic 8 Semi Filter/Reg. 1/" 5mic 1 Semi Filter/Reg. 1/" mic Auto Filter/Reg. 1/" mic 8 Auto Filter/Reg. 1/" mic 1 Auto Filter/Reg. 1/" 5mic Auto Filter/Reg. 1/" 5mic 8 Auto Filter/Reg. 1/" 5mic 1 Auto = Standard version 5
Modular line 1/ Order Code 3 Way on-off valve Shut-off valve IV Isolation Valve 1/" IV S/P Isolation Valve 1/" Solenoid/Pneu. Control C5.. Sol. Kit for IV S/P-VDC C5..3 Sol. Kit for IV S/P-VAC C5.. Sol. Kit for IV S/P-11VAC C5..5 Sol. Kit for IV S/P-VAC C..1 Pneumatic Control kit for IV S/P IV C Isolation Valve 1/" CNOMO Control C..11 3/ Way Sol. Valve for IV C A5.. Coil DC V Sp.=mm A5..7 Coil AC V Sp.=mm A5..8 Coil AC 11V Sp.=mm A5..9 Coil AC V Sp.=mm A5..1 Connector mm FR+L Unit FR+L S FR+L 1/" mic Semiauto FR+L 8 S FR+L 1/" mic 8 Semiauto FR+L 1 S FR+L 1/" mic 1 Semiauto FR+L 5 S FR+L 1/" 5mic Semiauto FR+L 5 8 S FR+L 1/" 5mic 8 Semiauto FR+L 5 1 S FR+L 1/" 5mic 1 Semiauto FR+L A FR+L 1/" mic Auto FR+L 8 A FR+L 1/" mic 8 Auto FR+L 1 A FR+L 1/" mic 1 Auto FR+L 5 A FR+L 1/" 5mic Auto FR+L 5 8 A FR+L 1/" 5mic 8 Auto FR+L 5 1 A FR+L 1/" 5mic 1 Auto FR+L 8 S V FR+L 1/" mic 8 SA Vac Load FR+L 1 S V FR+L 1/" mic 1 SAVac Load FR+L 5 8 S V FR+L 1/" 5mic 8 SA Vac Load FR+L 5 1 S V FR+L 1/" 5mic 1 SA Vac Load FR+L 8 A V FR+L 1/" mic 8 A Vac Load FR+L 1 A V FR+L 1/" mic 1 A Vac Load FR+L 5 8 A V FR+L 1/" 5mic 8 A Vac Load FR+L 5 1 A V FR+L 1/" 5mic 1 A Vac Load Slow start valve SS Slow Start 1/" = Standard version
Modular line 1/ Order Code Spare parts Diaphragm complete PROD. VERSION C.1.13 R - FR RELIEVING C.1.1 R - FR NON RELIEVING Bowl for lubricator PROD. VERSION C.3.8 L TT C.3.8 L PE C.3.11 VL TT C.3.117 VL PE Regulation spring Bowl for filter PROD. SET REGULATION A38.. MR - R - FR A38.. MR - R - FR 8 A38..1 MR - R - FR 1 PROD. VERSION C.. F - FR - MF TT SS C..18 F - FR - MF PE SS Filtering element PROD. VERSION C..11 F MICRON C..1 FR MICRON C..1 F 5 MICRON C..5 FR 5 MICRON C..53 MF,1 MICRON Oil window C.3.5 PROD. L Bowl with automatic drain PROD. VERSION C..133 F - FR - MF TT SA C..13 F - FR - MF PE SA Oil plug with OR 31 C75.3.11 PROD. L Automatic drain C..13 PRODUCT F - FR - MF Mounting kit for automatic drain C..131 PRODUCT F - FR - MF Gauge Psi A B CH. A38.. 1 175 G1/8 1 A38..55 85 G1/8 1 7
Modular line 1/ Order Code Kit assembling units Plug PRODUCT CONNECTION C.5.1 F+R+L - V3+FR+L B38..18 G1/8 C..1 FR+L A.1.1 G1/ (air takeoff) C.7.1 F+L - F+MF Battery assembling kit C..1 19 Air takeoff for units CONNECTION PRODUCT C.5.1 1/8 F+R+L - FR+L V3+FR+L - F+L - F+MF C.5.18 1/ F+R+L - FR+L V3+FR+L - F+L - F+MF C.5.13 WAYS (1/ -1/8 ) F+R+L - FR+L V3+FR+L - F+L - F+MF Battery air take-off C.5.3 CONNECTIONS n 1 G1/ - n G1/8 Distribution block for two regulators C.5.111 Bracket C38..9 T bracket kit C.5.1 8