All you need for sieving VWR-Haver test sieve shakers VWR Collection test sieves and sieving accessories vwr.com Test Sieve shakers Quick release clamps Sound absorbing cabinets Software U ltrasonic sieving aids Sample splitters Test sieves Sieve standards Ultrasonic cleaning baths
VWR-Haver test sieve shakers Contents Introduction...3 Test Sieve shaker selector tool...4 EML digital electromagnetic driven test sieve shakers...5 EML 200 digital plus 3D electromagnetic driven test sieve shaker...6 EML 315 digital plus 3D electromagnetic driven test sieve shaker...7 EML 450 digital plus 3D electromagnetic driven test sieve shaker...8 UWL 400 digital plus Heavy duty test sieve shaker...9 Tyler Ro-Tap test sieve shaker...11 Sound absorbing cabinets...12 HAVER-CSA Software...12 Ultrasound sieving...13 Sample splitters...14 VWR test sieve specifications...15 Test sieve certificates...16 76, 100 and 150 mm test sieves...17 200 mm test sieves...18 203 mm test sieves...20 250 mm test sieves...22 300 mm test sieves...23 305 mm test sieves...25 315 mm test sieves...26 350 mm test sieves...27 400 mm test sieves...28 Ultrasonic sieve cleaning baths...29 NIST sieve standards... 31 2
For more information, please contact your VWR International Sales Office VWR-Haver test sieve shakers Introduction Test sieve shakers are used to separate sieveable products into single fractions. Reproducible sieve results can be achieved in the shortest possible time by using electromagnetic driven and fully electronically controlled sieve shakers. This way, hand sieving, which is the basis of the total separation technique, can be accurately replicated. After completion of sieving (consistant results achieved) the individual fragments are weighed for analysis. The software from Haver offers an easy to use tool for this analysis. The VWR-HAVER test sieve shakers have no rotating parts, are extremely durable, maintenance free, very adaptable and have a low noise level. Due to the use of a special spring system and cast iron parts, the construction is heavy and sturdy. This avoids unwanted vibrations being transmitted to the stationary parts of the sieve shaker and its stand. VWR - HAVER sieve shakers have a 4 year Warranty. Key features of the VWR-HAVER sieve shakers 3-D-sieving action All VWR-HAVER sieve shakers offers optimum reproducible and quick results All VWR-HAVER test sieve shakers produce a three-dimensional (3-D) sieving action, also the EML450 digital plus, which is unique due to it s size! The circular movement distributes the material over the whole sieving surface, thus using the whole available surface of the sieve. The vertical motion facilitates the material progresses through the meshes. Combinations of both movements reduce the sieving period. The sieving time is finished when the result remains constant. Self-readjusting amplitude with permanent acceleration measurement G-control Our G-control technology ensures self-readjusting amplitude using permanent acceleration measurement of the whole test sieve tower. It balances the oscillation of the machine and the effect of variable undergrounds. This guarantees that amplitudes stay the same irrespective of the feed quantity and the installation position. All electromagnetically driven VWR-HAVER sieve shakers (models EML-200 till 450) use this technology. Optional TwinNut - quick-release clamping system The TwinNut clamps for easy fixing and removal of the cover are an alternative to the standard Classic knurled nuts. The guide rods of the Classic system can also be used for the TwinNut system. 3
VWR-Haver test sieve shakers Shaker summary Characteristics Test Sieve Shaker EML 200 digital EML 315 digital EML 450 digital UWL 400 Ro-Tap 8 RX-29 Ro-Tap 12 RX-30 76 (3 ) 100 150 Applicable Test Sieves Round sieves, diameter in mm 200 203 (8 ) 250 300 305 (12 ) 315 350 400 450 (18 ) optional Square sieves mm 300 x 300 500 x 500 Three-dimensional sieving action Self-readjusting amplitude; G-control _ Constant acceleration/rotation Max. amplitude approx./mm (with maximum load) 3 2 2 2,5 Fixed horizontal orbit 23 mm Intermittent operation (repeated stop & go ) Control programmable - - - 10 programs 10 programs 10 programs No No No Control with saving function _ - - Time switch, minutes 0-99 0-99 0-99 0-599 0-99 0-99 Continuous operation - - - All electronic control - - - Digit display for all functions Max. load capacity in kg 8,7 21 42 50 7,2 17 Max. weight of sieving material in kg (with full load) 3 6 15 20 3 6 Dry sieving Wet sieving Sound emission, dba 70 70 73 70 <70* <70* Weight, approx. kg (without test sieves) 34 53 100 190 82 82 * Used with a sound absorbing cupboard (standard delivered with Ro-Tap Shakers) 4
For more information, please contact your VWR International Sales Office VWR-Haver test sieve shakers EML digital electromagnetic driven sieve shakers EML digital plus electromagnetic driven test sieve shakers (for dry and wet sieving) The 3 models from the electromagnetic driven test sieve shaker series, EML 200, and 315 the 450 digital plus, are constructed for optimal 3-D sieving action. The self-readjusting amplitude, using permanent acceleration measurement of the whole sieve tower, balances the oscillation of the machine and its stand. This guarantees that amplitudes stay the same, irrespective of the feed quantity and the installation position. The EML 200 digital plus for dry sieving has a built-in control panel. Models EML 315 and 450 for dry sieving have a separate control gear. Models EML 200, 315 and 450 have a separate control gear for wet sieving. The EML 450 digital plus is the first sieve shaker worldwide utilizing 3-D sieving action with a self-readjusting amplitude for sieves up to 450 mm. All models can be equipped with the TwinNut clamping system for a fast and secure fixing of the sieve stack on the shaker. EML 200 digital T with optional clamping system TwinNut EML 315 digital T with optional Easylock clamping system Short description: Self readjusting amplitude Forced regulated 3-D sieving action All electronic control Digital indication of all functions Saving function for 10 sieving programs Handy push-button key front panel Electromagnetic drive 3000 impulses per minute (50 Hertz) Timer function: 0-99 minutes or continuous operation Intermittent or continuous shaking operation Operating voltage: 230 V, 50-60 Hz Power consumption: 185 W Sound emission: 70 dba on EML 200 and 315 73 dba on EML 450 Vibration Body 3 Spring System Base Plate EML 450 digital N (for wet sieving) with optional TwinNut clamping system. Standard included with each shaker: Clamp system with 2 guide rods and 2 knurled nuts with handlebars Cover with inspection glass Water spray diffuser for wet sieving models Software for analysis of sieve results 5
VWR-Haver test sieve shakers EML digital electromagnetic driven sieve shakers VWR-HAVER test sieve shaker EML 200 digital plus for dry and wet sieving Description EML 200 digital T (for dry sieving) 230 Volt, 50-60 Hz Includes clamping system Classic and a cover with inspection glass. Can hold 9 standard test sieves or 15 half-height test sieves + 1 sieve pan. Includes the software for analysis of sieve results. EML 200 digital plus T with TwinNut quick-release clamping system Simlilar as above, but delivered with TwinNut clamps EML 200 digital N (for wet sieving) 230 V, 50-60 Hz Includes clamping system Classic, a cover with inspection glass and wide spreading spray diffuser, a water plug with socket and 2 hose clips and 3 m PVC water hose. Can hold 9 standard test sieves or 15 half-height test sieves + 1 sieve pan. Includes the software for analysis of sieve results. EML 200 digital plus N with TwinNut quick-release clamping system. Simlilar as above, but delivered with TwinNut clamps. 510-0948 510-0949 510-0950 510-1283 510-1284 510-1285 510-0951 510-0952 510-0953 510-1286 510-1287 510-1288 IQ/OQ documentation 510-1246 Accessories Reduction pieces for standard cover, made of polyamide to receive test sieves with diameters smaller then 200mm: 76 mm (3 ) 510-1017 100 mm 510-1009 150 mm 510-1013 Cover with inspection glass 510-1020 Cover with inspection glass and wide spreading spray diffuser (for wet sieving) 510-1021 Inspection glass without centre hole (to be mounted in the cover) 510-1007 Inspection glass with centre hole (to be mounted in the cover) 510-1018 Wide spreading spray diffuser with socket 510-1008 (to be mounted on the inspection glass with centre hole) Water plug with socket and 2 hose clips 510-0978 (to be mounted on the inspection glass with centre hole) PVC water hose, 12,5 mm diameter, 3 m 510-0984 Guide rod for Classic or TwinNut clamping system, 510-1309 660 mm long (1 piece) Knurled nut with 2 handlebars (one piece) 510-0985 Sound absorbing cupboard for Test Sieve Shaker EML 200 510-1310 Sieve pan and standard sieve set Sieve pan, stainless steel, 200 mm ø, 50 mm effective height, for dry sieving 510-3673 Sieve pan with discharge nozzle, stainless steel, 200 mm ø, 50 mm effective height, with discharge nozzle and PVC water hose for wet sieving 510-3675 Standard sieve set Stainless steel, 200 mm ø, 50 mm effective height, according to DIN ISO 3310-1; 45 µm, 63 µm, 125 µm, 250 µm, 500 µm, 1,0 mm, 2,0 mm, 4,0 mm, sieve pan 510-1243 6
For more information, please contact your VWR International Sales Office VWR-Haver test sieve shakers EML digital electromagnetic driven sieve shakers VWR-HAVER test sieve shaker EML 315 digital plus for dry and wet sieving Description EML 300/315 digital plus T (for dry sieving) 230 Volt, 50-60 Hertz Includes clamping system Classic and a cover with inspection glass. Can hold 8 standard test sieves or 14 half-height test sieves + 1 sieve pan. Includes the software for analysis of sieve results. EML 315 Digital T with TwinNut quick-release clamping system. Simlilar as above, but delivered with TwinNut clamps EML 300 digital plus N (for wet sieving) 230 Volt, 50-60 Hertz Includes clamping system Classic, a cover with inspection glass and wide spreading spray diffuser, a water plug with socket and 2 hose clips 3 m PVC water hose. Can hold 8 standard test sieves or 14 half-height test sieves + 1 sieve pan. Includes the software for analysis of sieve results. EML 315 Digital N with TwinNut quick-release clamping system simlilar as above, but delivered with TwinNut clamps. 510-0954 510-0955 510-0956 510-1289 510-1290 510-1291 510-0957 510-0958 510-0959 510-1292 510-1293 510-1294 IQ-OQ documentation 510-1246 Accessories Cover with inspection glass (test sieve diameter 300/250/200 mm) 510-1003 Cover with inspection glass (test sieve diameter 305/250/200 mm) 510-1004 Cover with inspection glass (test sieve diameter 315/250/200 mm) 510-0998 Cover with wide spreading spray diffuser 510-0999 (wet sieving, test sieve diameter 300/250/200 mm) Cover with wide spreading spray diffuser 510-1001 (wet sieving, test sieve diameter 305/250/200 mm) Cover with wide spreading spray diffuser 510-1002 (wet sieving, test sieve diameter 315/250/200 mm) Inspection glass without centre hole (to be mounted in the cover) 510-1007 Inspection glass with centre hole (to be mounted in the cover) 510-1018 Wide spreading spray diffuser with socket 510-1008 (to be mounted on the inspection glass with centre hole) Water plug with socket and 2 hose clips 510-0978 Reduction piece, made from polyamide, 510-1252 to receive a sieve pan with discharge nozzle, diameter 200 mm PVC water hose, 12,5 mm diameter, 3 m 510-0984 Guide rod for Classic or TwinNut clamping system, 660 mm long 510-1309 (1 piece) Knurled nut with 2 handlebars (one piece) 510-0985 Sound absorbing cupboard for test sieve shaker EML 315 510-1311 Sieve pan and standard sieve set Sieve pan, stainless steel, 300 mm ø, 60 mm effective height, for dry sieving 510-3691 Sieve pan with discharge nozzle, stainless steel, 300 mm ø, 60 mm effect. 510-3692 height, with discharge nozzle and PVC water hose for wet sieving Standard sieve set: Stainless steel, 300 mm ø, 60 mm effect. height, according to DIN ISO 3310-1; 510-1244 45 μm, 63 μm, 125 μm, 250 μm, 500 μm, 1,0 mm, 2,0 mm, 4,0 mm, sieve pan 7
VWR-Haver test sieve shakers EML digital electromagnetic driven sieve shakers VWR-HAVER test sieve shaker EML 450 digital plus for dry and wet sieving Description EML 450 digital T (for dry sieving) 230 Volt, 50-60 Hertz Includes clamping system Classic and a cover with inspection glass. Can hold 12 standard test sieves + 1 sieve pan. Includes the software for analysis of sieve results. EML 450 Digital T with TwinNut quick-release clamping system. Simlilar as above, but delivered with TwinNut clamps EML 450 digital N (for wet sieving) 230 Volt, 50-60 Hertz Includes clamping system Classic, a cover with inspection glass and wide spreading spray diffuser, a water plug with socket and 2 hose clips and 3 m PVC water hose Can hold 12 standard test sieves + 1 sieve pan. Includes the software for analysis of sieve results. EML 450 Digital N with TwinNut quick-release clamping system Simlilar as above, but delivered with TwinNut clamps. 510-0960 510-0961 510-0962 510-1295 510-1296 510-1297 510-0963 510-0964 510-0965 510-1298 510-1299 510-1300 IQ-OQ documentation 510-1246 Accessories Cover with inspection glass (test sieve ø 450/400/350/315/305/300 mm) 510-0992 Cover with inspection glass with wide spreading spray diffuser (wet sieving, test sieve diameter 450/400/350/305/300 mm) 510-0993 Reduction piece for cover, made from polyamide, for test sieves 200 mm ø 510-0996 Inspection glass without centre hole (to be mounted in the cover) 510-1010 Inspection glass with centre hole (to be mounted in the cover) 510-1014 Wide spreading spray diffuser incl. socket (to be mounted on the inspection glass with centre hole) 510-1008 Water plug with socket and 2 hose clips 510-0978 PVC water hose, 12,5 mm ø, 3 m 510-0984 Reduction piece made from polyamide, to receive a sieve pan of only 400 mm under larger sieves 510-0997 Additional weight for extra stability for test sieve diameter 200-450 mm (27 kg) 510-0994 Knurled nut with 2 handlebars 510-0977 Guide rod 850 mm long (one piece) 510-0976 Guide rod 1 000 mm long (one piece) 510-1016 Sound absorbing cupboard for test sieve shaker EML 450 510-1312 Sieve pan and standard sieve set Sieve pan, stainless steel, 400 mm ø, 65 mm effective height, for dry sieving 510-3709 Sieve pan with discharge nozzle, stainless steel, 400 mm ø, 65 mm effective height, with discharge nozzle and PVC water hose for wet sieving 510-3710 Standard sieve set: Stainless steel, 400 mm ø, 65 mm effective height, according to DIN ISO 3310-1; 510-1245 45 µm, 63 µm, 125 µm, 250 µm, 500 µm, 1,0 mm, 2,0 mm, 4,0 mm, sieve pan 8
For more information, please contact your VWR International Sales Office UWL heavy duty test sieve shakers (for dry and wet sieving) VWR-Haver test sieve shakers UWL heavy duty sieve shakers The VWR-HAVER shaker UWL 400 with his 2 unbalanced motors is the most efficient of our test sieve shakers and achieves optimum result for large feed quantities. It creates a 3-D sieving action and is especially designed for coarse grained products. Besides the standard use the UWL 400 T can be fitted as UWL 400 N for wet sieving (protection IP 54) or as UWL 400 H for test sieves with beech wood frame. UWL 400 short description: 3-D sieving action All electronic control Driven by two rotary current unbalanced motors Rotations 1 500 rpm Separate control gear, wall fixing possible For test sieves up to 400 mm diameter or square sieved up to 500 x 500 mm Max. weight of full sieve tower: 50 kg (equivalent to a weight of sieving material of 20 kg) Timer function: 0-599 Operating voltage: 230 V, 50 Hz Power consumption: 470 W Sound emission: 70 dba UWL 400 T (for dry sieving) with optional clamping system TwinNut UWL400 H for Beechwooden square sieves Standard included with each shaker: Clamp system with 2 guide rods and 2 knurled nuts with handlebars Cover with inspection glass Water spray diffuser only on wet sieving models UWL400 N Special appliance for beech wood frames only on UWL400 H model Shakers are also available with TwinNut quick-release clamping system 9
VWR-Haver test sieve shakers UWL heavy duty sieve shakers Description UWL 400 T (for dry sieving) 230 Volt, 50 Hz Includes clamping system Classic and a cover with inspection glass Can hold 12 standard test sieves + 1 sieve pan. UWL 400 T with TwinNut quick-release clamping system Simlilar as above, but delivered with TwinNut clamps UWL 400 N (for wet sieving) 230 Volt, 50 Hz. Includes clamping system Classic, a cover with inspection glass and wide spreading spray diffuser, a water plug with socket and 2 hose clips and 3 m PVC water hose Can hold 12 standard test sieves + 1 sieve pan. UWL 400 N with TwinNut quick-release clamping system Simlilar as above, but delivered with TwinNut clamps UWL 400 H (for dry sieving) 230 Volt, 50 Hertz Includes a special appliance for beech wood frames 300 x 300/500 x 500 mm and clamping system Can hold 9 beechwood sieves + 1 sieve pan Accessories VWR-HAVER heavy duty sieve shaker UWL 400 for dry and wet sieving 510-0968 510-0967 510-0966 510-1302 510-1303 510-1304 510-0974 510-0973 510-0972 510-1305 510-1306 510-1307 510-0971 510-0970 510-0969 Cover with inspection glass (test sieve diameter 400/300 mm) 510-1256 Cover with inspection glass (test sieve diameter 400/305 mm) 510-1255 Cover with inspection glass (test sieve diameter 400/315 mm) 510-1257 Cover with wide spreading spray diffuser (wet sieving, test sieve ø 400/300 mm) 510-1254 Cover with wide spreading spray diffuser (wet sieving, test sieve ø 400/305 mm) 510-1253 Cover with wide spreading spray diffuser (wet sieving, test sieve ø 400/315 mm) 510-1258 Inspection glass without centre hole 510-1010 Inspection glass with centre hole 510-1014 Wide spreading spray diffuser incl. socket 510-1008 Water plug with socket and 2 hose clips 510-0978 PVC water hose, 12,5 mm, 3 m 510-0984 Reduction pieces for test sieve ø 200 mm (upper and lower part) 510-1015 Reduction piece for test sieve ø 350 mm 510-1023 Reduction piece made from polyamide, to receive a sieve pan of only 300 mm with discharge nozzle 510-1022 Knurled nut with 2 handlebars (one piece) 510-0977 Guide rod, classic, 850 mm long (one piece) 510-0976 Guide rod, classic, 1000 mm long (one piece) 510-1016 Special appliance for beech wood frames and clamping system for test sieves with beech wood frame 510-1259 (300 x 300/500 x 500 mm) Sound absorbing cupboard for test sieve shaker UWL 400 510-1312 Sieve pan ans standard sieve set Sieve pan, stainless steel, ø 400 mm, for dry sieving 510-3709 Sieve pan with discharge nozzle, stainless steel, ø 400 mm, with discharge nozzle and PVC water hose for wet sieving 510-3710 Standard sieve set: Stainless steel, 400 mm ø, 65 mm effective height, according to DIN ISO 3310-1; 510-1245 45 µm, 63 µm, 125 µm, 250 µm, 500 µm, 1,0 mm, 2,0 mm, 4,0 mm, sieve pan 10
For more information, please contact your VWR International Sales Office Tyler Ro-Tap test sieve shaker (for dry sieving) VWR-Haver test sieve shakers Tyler Ro-Tap sieve shaker The Tyler Ro-Tap shaker RX 29 and RX 30 reproduce the circular and tapping motion of hand sieving, but in a repeatable mechanical action. The sieve shaker makes a circular movement of the sieve stack and a mechanical arm makes a tapping movement on the top of the sieve stack, thus creating a perfect and repeatable imitation of hand shaking with additional tapping of the sieve on the side. They are operated in a totally enclosed cabinet, which guarantees the safety of the operator, and reduces the sound emission significantly and makes the shaker CE-conform. The Ro-Tap shaker RX 29 accepts sieves with a maximum diameter of 203mm (8 ). The Ro-Tap shaker RX 30 accepts sieves with a maximum diameter of 305mm (12 ). Tyler Ro-Tap Shaker short description: 2-D circular sieving action plus tapping movement of a mechanical arm All electronic control Rotation frequency: 278 rpm Tapping frequency: 150 rpm Separate control gear, mounted in the enclosure For test sieves up to 203 mm (8 ) or 305 mm (12 ) Max. weight of full sieve tower: 3 kg (net load) or 6 kg Timer function: 0-99 minutes Operating voltage: 230 V, 50 Hz Power consumption: 670 VA Sound emission: < 70 dba (with standard sound absorbing enclosure) Weight: +/- 124 kg Dimensions: 110 x 61 x 71 cm Description Tyler Ro-Tap RX29 (for dry sieving) 230 Volt, 50 Hz Includes clamping system for 6 standard or 13 half height sieves and an additional sieve pan with maximum diameter of 203 mm (8 ). Tyler Ro-Tap RX30 (for dry sieving) 230 Volt, 50 Hz Includes clamping system for 5 standard or 8 half height sieves and an additional sieve pan with maximum diameter of 203 mm (12 ). 510-0945 510-0946 510-0947 510-1035 510-1034 510-1036 11
VWR-Haver test sieve shakers Cupboards CSA Software Sound absorbing cupboards for test sieve shakers Sound absorbing cupboards are designed to reduce the intensity of sound. The intensity of sound during operation can be reduced by up to 25 db(a) depending on the machine type. For VWR-HAVER EML 200 and 315 Outside dimensions (w x d x h): 600 x 600 x 1210 mm For VWR-HAVER EML 450 and UWL 400 Outside dimensions (w x d x h): 1000 x 800 x 1750 mm Colour: RAL 9010, white Description Sound absorbing cupboard for VWR-HAVER EML 200 510-1310 Sound absorbing cupboard for VWR-HAVER EML 315 510-1311 Sound absorbing cupboard for VWR-HAVER EML 450 and UWL 400 510-1312 HAVER CSA 5.0 Evaluation Software for Sieve Analysis The HAVER CSA 5.0 software enables PC-aided analysis of standard sieve systems. Three versions of this software are available which differ in the scale of functions. The results of measurements are documented for quality assurance purposes and can be introduced into statistics and reports due to the complex data processing. Input of sieve sets, materials and customers / Analysis report / Protocol (DIN 2591 + DIN 66165) / Particle size account (DIN 66141) Statistic functions, for example for materials and customers Expanded account, Example: Sauter mean diameter Account of AFS-numbers according to VDG-data sheet HAVER CSA 5.0 BASIC HAVER CSA 5.0 EXPERT HAVER CSA 5.0 NETWORK X X X Definition of particle limits / Loading of comparable data X X Graphics: RRSB-net, cumulative oversize distribution curve Data bank functions, example: searching and reporting Data export, for example to Excel Import of aged data X X X X X X X X X X X X X X Take over of external data in the context of LIM s systems, example: numbers of samples and charges Transfer to external systems (LIMS) by txtdata connections X X 12
For more information, please contact your VWR International Sales Office VWR-Haver test sieve shakers The ultrasonic sieving system Your advantages at a glance Simple and precise reports. User friendly and self-explanatory user interface. Complex graphical display and detailed documentation. Works under the operating systems Windows XP, Vista, 7.0. Connection of different types of scales and test sieve shakers. Description HAVER CSA 5.0 BASIC Software 510-1622 HAVER CSA 5.0 EXPERT Software 510-1623 HAVER CSA 5.0 NETWORK Software 510-1624 Ultrasonic sieving Using ultrasonic frequency variation for test sieving even powders with separating cuts of 300 micron can be sieved. Fitting at least one HAVER-Test Sieve with a frequency variation system enables to do so. The ultrasonic frequency variation system consists of a clamping ring, which is connected by a converter to a generator. The generator converts electrical energy into high frequency energy which is then converted to mechanical energy by the converter and transferred to the clamping ring. The sound waves cause the test sieve frame to oscillate at high frequency. These oscillations are transferred to the test sieve cloth where they are evenly distributed. The oscillations of the test sieve cloth reduce the frictional resistance between the grains and the screen. This reduces the tendency towards blockage, resulting in increased throughput. The end of a test sieving period is achieved clearly faster. Test sieving of some difficult products is easier or even becomes possible. Sieve diameter (mm) Operating frequency Maximum ultrasonic capacity Voltage/Current Available for 200, 300 and 400 mm sieves 33-37 khz 50 W 200-240 V ± 10%/1A To fit Ultrasonic sieving system to fit 200mm test sieve, CH plug 510-1274 Ultrasonic sieving system to fit 200mm test sieve, EU plug 510-1275 Ultrasonic sieving system to fit 200mm test sieve, UK plug 510-1276 Ultrasonic sieving system to fit 300mm test sieve, CH plug 510-1277 Ultrasonic sieving system to fit 300mm test sieve, EU plug 510-1278 Ultrasonic sieving system to fit 300mm test sieve, UK plug 510-1279 Ultrasonic sieving system to fit 400mm test sieve, CH plug 510-1280 Ultrasonic sieving system to fit 400mm test sieve, EU plug 510-1281 Ultrasonic sieving system to fit 400mm test sieve, UK plug 510-1282 13
VWR-Haver sieve shakers VWR-HAVER sample splitters VWR-HAVER sample splitters for Dividing Sieve Material into Representative Test Sieve Samples Sample splitters RT 6.3 - RT 12.5 Sample splitters consisting of: 1 rack made from lacquered sheet steel 1 divider made from stainless steel 3 receivers, made from tinned sheet, contents 1,75 l model RT 12.5 18 divisions 12,5 mm = ½ model RT 6.3 12 divisions 6,3 mm = ¼ Approx. Weight kg 3,5 3,5 510-0491 510-0492 Alternative with 3 plastic laminated containers of 2 l RT 12.5 18 divisions 12,5 mm = ½ RT 6.3 12 divisions 6,3 mm = ¼ 3,5 3,5 510-0493 510-0494 Spare parts: Rack, 300 x 250 x 270 mm Receiver made from tinned sheet, contents: 1,75 l Receiver plastic laminated, contents: 2 l Divider, 18 divisions 12,5 mm = ½ Divider, 12 divisions 6,3 mm = ¼ Sample splitters RT 25 - RT 37.5 - RT 50 - RT 75 Sample splitter made from galvanized sheet steel consisting of: 1 rack, 1 divider, 3 receivers with grab handles, contents 8 litres RT 75 6 divisions 75 mm = 3 RT 50 8 divisions 50 mm = 2 RT 37.5 12 divisions 37,5 mm = 1½ RT 25 16 divisions 25 mm = 1 2,2 0,2 0,6 1,0 0,8 21,5 21,5 21,5 21,5 510-0498 510-1261 510-1262 510-0499 510-0944 510-0487 510-0488 510-0489 510-0490 Spare parts: Rack 620 x 260 x 420 mm Receiver, contents: 8 Liter Divider, 6 divisions 75 mm = 3 Divider, 8 divisions 50 mm = 2 Divider, 12 divisions 37,5 mm = 1½ Divider, 16 divisions 25 mm = 1 8,9 2,7 4,6 4,6 4,6 4,6 510-0495 510-1263 510-0942 510-0496 510-0943 510-0497 TYLER sample reducer RX 18 TYLER Sample Reducer designed to reduce large material samples to workable testing sizes; The Sample Reducer accomplishes a 16 to 1 reduction and maintains a representative size distribution in one process. 18 510-1264 Max. particule size 12,7 mm (1/2 ) Sieve rack, for max. 5 sieves to 203 mm Ø, 50 mm height 510-1313 Sieve rack, for max. 10 sieves to 203 mm Ø, 50 mm height 510-1991 14
For more information, please contact your VWR International Sales Office VWR Collection test sieves Specifications VWR test sieves and accessories Test sieve with beaded frame, stainless steel, full nominal height: Diameter D 100 150 200 203 8 250 300 305 315 350 400 mm Nominal height H 45 50 50 50 55 60 60 75 60 65 mm Test sieve with beaded frame, stainless steel, reduced nominal height: Diameter D 200 203 8 300 mm Nominal height H 32 32 30 mm Test sieve with flat frame, stainless steel, especially for ultra-fine particle separation: Diameter D 76 3 mm Nominal height H 22 mm Sieve cover, stainless steel, with knob: Diameter D 76 100 150 200 203 8" 250 300 305 315 400 mm Intermediate pan, stainless steel, frame with solid base Diameter D 200 203 8 300 400 mm Nominal height H 50 or 32 50 or 32 60 65 mm Intermediate ring, stainless steel, frame without base: Diameter D 100 150 200 203 8 250 300 305 315 350 400 mm Nominal height H 45 50 50 or 32 50 55 60 60 75 60 65 mm Sieve pan, stainless steel, to receive the sieved material: Diameter D 76 100 150 200 203 8" 250 300 305 315 350 400 mm Nominal height H 16 45 50 50 or 25 50 or 25 55 60 50 60 60 65 mm Sieve pan with outlet, stainless steel: Diameter D 200 203 8" 250 300 305 315 350 400 mm 350 400 mm Nominal height H 50 50 55 60 50 60 60 65 mm 60 65 mm 15
VWR Collection test sieves Certificates Control of measuring instruments and inspection certificates for VWR test sieves The standard EN ISO 9000 ff. requires measuring instruments to be inspected at regular intervals. This also includes test sieves that are used as measuring instruments. VWR offers the opportunity to examine test sieves by a computerized video analysis system at the manufacturers works laboratory or on site. During the inspection aperture sizes are measured and recorded in warp and weft direction. Statistical analysis is used to verify the quality of the test sieve. Following inspection, test sieves receive a seal. For each inspected test sieve, the customer obtains as quality assurance document an inspection certificate 3.1 according to EN 10 204 showing the distribution of aperture widths in graphic (for test sieve cloth only) and tabular form. Test sieves are inspected by specially skilled persons at the manufacturer factory using calibrated computerized video analysis system. The institution Materialprüfungsanstalt für das Bauwesen, Institut für Baustoffe, Massivbau und Brandschutz (MPA IBMP TU Braunschweig) confirms that the measuring device of the manufacturer corresponds to ISO 3310-1:2000 (5.2, Test Methods Test 3) and ASTM E 11-01 (Test Methods for Checking Wire Cloth and Testing Sieves to determine whether they conform to specification). The calibration method by the manufacturer guarantees the traceability to the national measuring standard. VWR Test Certificates 1. Standard Certificate of Compliance 2.1 The metal cloth for test sieves and the test sieve itself are fabricated to current standards. The fabrication is subject to our quality assurance system certified according to EN ISO 9001-2000. Each VWR test sieve is as standard delivered with a Certificate of Compliance with the Order 2.1 according to EN 10 204. 2. Optional Inspection Certificate or Calibration Certificate 3.1 VWR Test Sieves may be delivered with an Inspection Certificate or Calibration Certificate 3.1 according to EN 10 204 with measuring results of a specific test. Both methods perform a measurement in warp and weft direction. They differ in the quantity of the measured aperture widths, resulting in different confidence levels. During a calibration thrice as much aperture widths are measured than during a certification. In general the test sieve is subject to a specific inspection. The aperture widths are stated for warp and weft direction. The results are recorded for further control measurements. 16
VWR Collection test sieves with frame made from stainless steel With serial number and certificate of compliance with the order 2.1 EN 10 204 For more information, please contact your VWR International Sales Office VWR Collection test sieves 76 x 22 mm 100 x 45 mm 150 x 50 mm Sieve base made of stainless steel metal wire cloth mesh width mm 76 mm diameter 22 mm height 100 mm diameter 45 mm height 150 mm diameter 50 mm height 2,5 510-3661 510-0553 510-0607 2,36 510-3660 510-0552 510-0606 2,24 510-3659 510-0551 510-0605 2 510-3658 510-0550 510-0604 1,8 510-3657 510-0549 510-0603 1,7 510-3656 510-0548 510-0602 1,6 510-3655 510-0547 510-0601 1,4 510-3654 510-0546 510-0600 1,25 510-3653 510-0545 510-0599 1,18 510-3652 510-0544 510-0598 1,12 510-3651 510-0543 510-0597 1 510-3650 510-0542 510-0596 mesh width µm 900 510-3814 510-0541 510-0595 850 510-3815 510-0540 510-0594 800 510-3649 510-0539 510-0593 710 510-3648 510-0538 510-0592 630 510-3647 510-0537 510-0591 600 510-3646 510-0536 510-0590 560 510-3645 510-0535 510-0589 500 510-3644 510-0534 510-0588 450 510-3643 510-0533 510-0587 425 510-3642 510-0532 510-0586 400 510-3641 510-0531 510-0585 355 510-3640 510-0530 510-0584 315 510-3816 510-0529 510-0583 300 510-3639 510-0528 510-0582 280 510-3638 510-0527 510-0581 250 510-3637 510-0526 510-0580 224 510-3636 510-0525 510-0579 212 510-3635 510-0524 510-0578 200 510-3634 510-0523 510-0577 180 510-3633 510-0522 510-0576 160 510-3632 510-0521 510-0575 150 510-3631 510-0520 510-0574 140 510-3630 510-0519 510-0573 125 510-3629 510-0518 510-0572 112 510-3628 510-0517 510-0571 106 510-3627 510-0516 510-0570 100 510-3626 510-0515 510-0569 90 510-3625 510-0514 510-0568 80 510-3624 510-0513 510-0567 75 510-3623 510-0512 510-0566 71 510-3622 510-0511 510-0565 63 510-3621 510-0510 510-0564 56 510-3620 510-0509 510-0563 53 510-3619 510-0508 510-0562 50 510-3618 510-0507 510-0561 45 510-3617 510-0506 510-0560 40 510-3616 510-0505 510-0559 38 510-3615 510-0504 510-0558 36 510-3614 510-0503 510-0557 32 510-3613 510-0502 510-0556 25 510-3612 510-0501 510-0555 20 510-3611 510-0500 510-0554 Inspection Certificate 3.1 according to EN 10204 (together with initial order of sieve) Calibration Certificate 3.1 according to EN 10204 (together with initial order of sieve) 510-1240 510-1237 Accessories 76 mm 100 mm 150 mm Sieve cover 510-3662 510-3664 510-3669 Sieve pan 510-3663 510-3665 510-3670 Sealing ring PVC - 510-3666 510-3671 Rubber balls and cubes for faster sieving: Rubber balls dia. 20 mm 510-3667 (for all sieves diameters): Rubber cubes 20 x 20 x 20 mm 510-3668 (for all sieves diameters): 17
VWR Collection test sieves 200 x 50 mm VWR VWR Collection Collection test test sieves sieves with with frame frame made made from from stainless stainless steel steel With serial number and certificate of compliance with the order 2.1 EN 10 204 With serial number and certificate of compliance with the order 2.1 EN 10 204 Sieve base made of stainless steel metal wire cloth mesh width mm mesh width µm mesh width mm 125 510-0798 900 510-0741 125 510-0839 112 510-0797 850 510-0740 112 510-0838 106 510-0796 800 510-0739 106 510-0837 100 510-0795 710 510-0738 100 510-0836 90 510-0794 630 510-0737 90 510-0835 80 510-0793 600 510-0736 80 510-0834 75 510-0792 560 510-0735 75 510-0833 71 510-0791 500 510-0734 71 510-0832 63 510-0790 450 510-0733 63 510-0831 56 510-0789 425 510-0732 56 510-0830 53 510-0788 400 510-0731 53 510-0829 50 510-0787 355 510-0730 50 510-0828 45 510-0786 315 510-0729 45 510-0827 40 510-0785 300 510-0728 40 510-0826 37,5 510-0784 280 510-0727 37,5 510-0825 35,5 510-0783 250 510-0726 35,5 510-0824 31,5 510-0782 224 510-0725 31,5 510-0823 28 510-0781 212 510-0724 28 510-0822 26,5 510-0780 200 510-0723 26,5 510-0821 25 510-0779 180 510-0722 25 510-0820 22,4 510-0778 160 510-0721 22,4 510-0819 20 510-0777 150 510-0720 20 510-0818 19 510-0776 140 510-0719 19 510-0817 18 510-0775 125 510-0718 18 510-0816 16 510-0774 112 510-0717 16 510-0815 14 510-0773 106 510-0716 14 510-0814 13,2 510-0772 100 510-0715 13,2 510-0813 12,5 510-0771 90 510-0714 12,5 510-0812 11,2 510-0770 80 510-0713 11,2 510-0811 10 510-0769 75 510-0712 10 510-0810 9,5 510-0768 71 510-0711 9,5 510-0809 9 510-0767 63 510-0710 9 510-0808 8 510-0766 56 510-0709 8 510-0807 7,1 510-0765 53 510-0708 7,1 510-0806 6,7 510-0764 50 510-0707 6,7 510-0805 6,3 510-0763 45 510-0706 6,3 510-0804 5,6 510-0762 40 510-0705 5,6 510-0803 5 510-0761 38 510-0704 5 510-0802 4,75 510-0760 36 510-0703 4,75 510-0801 4,5 510-0759 32 510-0702 4,5 510-0800 4 510-0758 25 510-0701 4 510-0799 3,55 510-0757 20 510-0700 3,35 510-0756 3,15 510-0755 2,8 510-0754 2,5 510-0753 2,36 510-0752 2,24 510-0751 2 510-0750 1,8 510-0749 1,7 510-0748 1,6 510-0747 1,4 510-0746 1,25 510-0745 1,18 510-0744 1,12 510-0743 1 510-0742 Perforated metal plate with square holes Inspection Certificate 3.1 according to EN 10204 (together with initial order of sieve) 510-1240 Calibration Certificate 3.1 according to EN 10204 (together with initial order of sieve) 510-1237 Accessories 50 mm nominal height Sieve cover 510-3672 Sieve pan 510-3673 Sieve pan with discharge nozzle 510-3675 Intermediate pan (sieve frame with solid base) 510-3676 Intermediate ring (sieve frame without base) 510-3678 Sealing ring PVC 510-3680 Sealing ring VITON (-15 C up to + 200 C) 510-3681 Rubber balls and cubes for faster sieving: Rubber balls dia. 20 mm (for all sieves diameters): 510-3667 Rubber cubes 20 x 20 x 20 mm (for all sieves diameters): 510-3668 18
For more information, please contact your VWR International Sales Office VWR Collection test sieves 200 x 32 mm VWR VWR Collection test test sieves with with frame made from from stainless steel steel With serial number With serial and number certificate and of certificate compliance of compliance with the order with 2.1 the EN order 10 204 2.1 EN 10 204 Sieve base made of stainless steel metal wire cloth mesh width mm mesh width µm 11,2 510-0678 900 510-0649 10 510-0677 850 510-0648 9,5 510-0676 800 510-0647 9 510-0675 710 510-0646 8 510-0674 630 510-0645 7,1 510-0673 600 510-0644 6,7 510-0672 560 510-0643 6,3 510-0671 500 510-0642 5,6 510-0670 450 510-0641 5 510-0669 425 510-0640 4,75 510-0668 400 510-0639 4,5 510-0667 355 510-0638 4 510-0666 315 510-0637 3,55 510-0665 300 510-0636 3,35 510-0664 280 510-0635 3,15 510-0663 250 510-0634 2,8 510-0662 224 510-0633 2,5 510-0661 212 510-0632 2,36 510-0660 200 510-0631 2,24 510-0659 180 510-0630 2 510-0658 160 510-0629 1,8 510-0657 150 510-0628 1,7 510-0656 140 510-0627 1,6 510-0655 125 510-0626 1,4 510-0654 112 510-0625 1,25 510-0653 106 510-0624 1,18 510-0652 100 510-0623 1,12 510-0651 90 510-0622 1 510-0650 80 510-0621 75 510-0620 71 510-0619 63 510-0618 56 510-0617 53 510-0616 50 510-0615 45 510-0614 40 510-0613 38 510-0612 36 510-0611 32 510-0610 25 510-0609 20 510-0608 Perforated metal plate with square holes mesh width mm 22,4 510-0699 20 510-0698 19 510-0697 18 510-0696 16 510-0695 14 510-0694 13,2 510-0693 12,5 510-0692 11,2 510-0691 10 510-0690 9,5 510-0689 9 510-0688 8 510-0687 7,1 510-0686 6,7 510-0685 6,3 510-0684 5,6 510-0683 5 510-0682 4,75 510-0681 4,5 510-0680 4 510-0679 Inspection Certificate 3.1 according to EN 10204 (together with initial order of sieve) 510-1240 Calibration Certificate 3.1 according to EN 10204 (together with 510-1237 initial order of sieve) Accessories 32 mm nominal height Sieve cover 510-3672 Sieve pan 510-3674 Sieve pan with discharge nozzle (50 mm height) 510-3675 Intermediate pan (sieve frame with solid base) 510-3677 Intermediate ring (sieve frame without base) 510-3679 Sealing ring PVC 510-3680 Sealing ring VITON (-15 C to + 200 C) 510-3681 Rubber balls and cubes for faster sieving: Rubber balls dia. 20 mm (for all sieves diameters): 510-3667 Rubber cubes 20 x 20 x 20 mm (for all sieves diameters): 510-3668 19
VWR Collection test sieves 203 x 50 mm VWR Collection test test sieves with frame made from stainless steel With serial number With serial and number certificate and of certificate compliance of compliance with the order with 2.1 the EN order 10 204 2.1 EN 10 204 Sieve base made of stainless steel metal wire cloth mesh width mm mesh width µm 125 510-2568 900 510-2511 112 510-2567 850 510-2510 106 510-2566 800 510-2509 100 510-2565 710 510-2508 90 510-2564 630 510-2507 80 510-2563 600 510-2506 75 510-2562 560 510-2505 71 510-2561 500 510-2504 63 510-2560 450 510-2503 56 510-2559 425 510-2502 53 510-2558 400 510-2501 50 510-2557 355 510-2500 45 510-2556 315 510-0940 40 510-2555 300 510-0939 37,5 510-2554 280 510-0938 35,5 510-2553 250 510-0937 31,5 510-2552 224 510-0936 28 510-2551 212 510-0935 26,5 510-2550 200 510-0934 25 510-2549 180 510-0933 22,4 510-2548 160 510-0932 20 510-2547 150 510-0931 19 510-2546 140 510-0930 18 510-2545 125 510-0929 16 510-2544 112 510-0928 14 510-2543 106 510-0927 13,2 510-2542 100 510-0926 12,5 510-2541 90 510-0925 11,2 510-2540 80 510-0924 10 510-2539 75 510-0923 9,5 510-2538 71 510-0922 9 510-2537 63 510-0921 8 510-2536 56 510-0920 7,1 510-2535 53 510-0919 6,7 510-2534 50 510-0918 6,3 510-2533 45 510-0917 5,6 510-2532 40 510-0916 5 510-2531 38 510-0915 4,75 510-2530 36 510-0914 4,5 510-2529 32 510-0913 4 510-2528 25 510-0912 3,55 510-2527 20 510-0911 3,35 510-2526 3,15 510-2525 2,8 510-2524 2,5 510-2523 2,36 510-2522 2,24 510-2521 2 510-2520 1,8 510-2519 1,7 510-2518 1,6 510-2517 1,4 510-2516 1,25 510-2515 1,18 510-2514 1,12 510-2513 1 510-2512 Perforated metal plate with square holes mesh width mm 22,4 510-2589 20 510-2588 19 510-2587 18 510-2586 16 510-2585 14 510-2584 13,2 510-2583 12,5 510-2582 11,2 510-2581 10 510-2580 9,5 510-2579 9 510-2578 8 510-2577 7,1 510-2576 6,7 510-2575 6,3 510-2574 5,6 510-2573 5 510-2572 4,75 510-2571 4,5 510-2570 4 510-2569 Inspection Certificate 3.1 according to EN 10204 (together with initial order of sieve) 510-1240 Calibration Certificate 3.1 according to EN 10204 (together with initial order of sieve) 510-1237 Accessories 50 mm nominal height Sieve cover 510-3682 Sieve pan 510-3683 Sieve pan with discharge nozzle 510-3685 Intermediate pan (sieve frame with solid base) 510-3686 Intermediate ring (sieve frame without base) 510-3688 Sealing ring PVC 510-3680 Sealing ring VITON (-15 C to + 200 C) 510-3681 Rubber balls and cubes for faster sieving: Rubber balls dia. 20 mm (for all sieves diameters): 510-3667 Rubber cubes 20 x 20 x 20 mm (for all sieves diameters): 510-3668 20
VWR VWR Collection test test sieves sieves with with frame frame made made from from stainless steel steel With serial number With Serial and Number certificate and of Certificate compliance of with Compliance the order with 2.1 the EN Order 10 2042.1 EN 10 204 Sieve base made of stainless steel metal wire cloth mesh width mm mesh width µm 11,2 510-0910 900 510-0881 10 510-0909 850 510-0880 9,5 510-0908 800 510-0879 9 510-0907 710 510-0878 8 510-0906 630 510-0877 7,1 510-0905 600 510-0876 6,7 510-0904 560 510-0875 6,3 510-0903 500 510-0874 5,6 510-0902 450 510-0873 5 510-0901 425 510-0872 4,75 510-0900 400 510-0871 4,5 510-0899 355 510-0870 4 510-0898 315 510-0869 3,55 510-0897 300 510-0868 3,35 510-0896 280 510-0867 3,15 510-0895 250 510-0866 2,8 510-0894 224 510-0865 2,5 510-0893 212 510-0864 2,36 510-0892 200 510-0863 2,24 510-0891 180 510-0862 2 510-0890 160 510-0861 1,8 510-0889 150 510-0860 1,7 510-0888 140 510-0859 1,6 510-0887 125 510-0858 1,4 510-0886 112 510-0857 1,25 510-0885 106 510-0856 1,18 510-0884 100 510-0855 1,12 510-0883 90 510-0854 1 510-0882 80 510-0853 75 510-0852 71 510-0851 63 510-0850 56 510-0849 53 510-0848 50 510-0847 45 510-0846 40 510-0845 38 510-0844 36 510-0843 32 510-0842 25 510-0841 20 510-0840 For more information, please contact your VWR International Sales Office VWR Collection test sieves 203 x 32 mm Inspection Certificate 3.1 according to EN 10204 (together with initial order of sieve) 510-1240 Calibration Certificate 3.1 according to EN 10204 (together with 510-1237 initial order of sieve) Accessories Certificate and accessories table missing 32 mm nominal height Sieve cover 510-3672 Sieve pan 510-3674 Sieve pan with discharge nozzle (50 mm height) 510-3675 Intermediate pan (sieve frame with solid base) 510-3677 Intermediate ring (sieve frame without base) 510-3679 Sealing ring PVC 510-3680 Sealing ring VITON (-15 C to + 200 C) 510-3681 Rubber balls and cubes for faster sieving: Rubber balls dia. 20 mm (for all sieves diameters): 510-3667 Rubber cubes 20 x 20 x 20 mm (for all sieves diameters): 510-3668 21
VWR Collection test sieves 250 x 55 mm VWR Collection test -Test sieves Sieves with with frame Frame made made from from stainless Stainless steel Steel With serial number With Serial and Number certificate and of Certificate compliance of with Compliance the order with 2.1 the EN 10 Order 2042.1 EN 10 204 Sieve base made of stainless steel metal wire cloth mesh width mm mesh width µm 125 510-3813 900 510-3756 112 510-3812 850 510-3755 106 510-3811 800 510-3754 100 510-3810 710 510-3753 90 510-3809 630 510-3752 80 510-3808 600 510-3751 75 510-3807 560 510-3750 71 510-3806 500 510-3749 63 510-3805 450 510-3748 56 510-3804 425 510-3747 53 510-3803 400 510-3746 50 510-3802 355 510-3745 45 510-3801 315 510-3744 40 510-3800 300 510-3743 37,5 510-3799 280 510-3742 35,5 510-3798 250 510-3741 31,5 510-3797 224 510-3740 28 510-3796 212 510-3739 26,5 510-3795 200 510-3738 25 510-3794 180 510-3737 22,4 510-3793 160 510-3736 20 510-3792 150 510-3735 19 510-3791 140 510-3734 18 510-3790 125 510-3733 16 510-3789 112 510-3732 14 510-3788 106 510-3731 13,2 510-3787 100 510-3730 12,5 510-3786 90 510-3729 11,2 510-3785 80 510-3728 10 510-3784 75 510-3727 9,5 510-3783 71 510-3726 9 510-3782 63 510-3725 8 510-3781 56 510-3724 7,1 510-3780 53 510-3723 6,7 510-3779 50 510-3722 6,3 510-3778 45 510-3721 5,6 510-3777 40 510-3720 5 510-3776 38 510-3719 4,75 510-3775 36 510-3718 4,5 510-3774 32 510-3717 4 510-3773 25 510-3716 3,55 510-3772 20 510-3715 3,35 510-3771 3,15 510-3770 2,8 510-3769 2,5 510-3768 2,36 510-3767 2,24 510-3766 2 510-3765 1,8 510-3764 1,7 510-3763 1,6 510-3762 1,4 510-3761 1,25 510-3760 1,18 510-3759 1,12 510-3758 1 510-3757 Perforated metal plate with square holes mesh width mm 125 510-1086 112 510-1085 106 510-1084 100 510-1083 90 510-1082 80 510-1081 75 510-1080 71 510-1079 63 510-1078 56 510-1077 53 510-1076 50 510-1075 45 510-1074 40 510-1073 37,5 510-1072 35,5 510-1071 31,5 510-1070 28 510-1069 26,5 510-1068 25 510-1067 22,4 510-1066 20 510-1065 19 510-1064 18 510-1063 16 510-1062 14 510-1061 13,2 510-1060 12,5 510-1059 11,2 510-1058 10 510-1057 9,5 510-1056 9 510-1055 8 510-1054 7,1 510-1053 6,7 510-1052 6,3 510-1051 5,6 510-1050 5 510-1049 4,75 510-1048 4,5 510-1047 4 510-1046 Inspection Certificate 3.1 according to EN 10204 (together with initial order of sieve) 510-1241 Calibration Certificate 3.1 according to EN 10204 (together with 510-1238 initial order of sieve) Accessories 55 mm nominal height Sieve cover 510-1229 Sieve pan 510-1230 Sieve pan with discharge nozzle (50 mm height) 510-1231 Intermediate ring (sieve frame without base) 510-1232 Rubber balls and cubes for faster sieving: Rubber balls dia. 20 mm (for all sieves diameters): 510-3667 Rubber cubes 20 x 20 x 20 mm (for all sieves diameters): 510-3668 22
VWR VWR Collection test test sieves sieves with with frame frame made made from from stainless steel steel With serial number With serial and certificate number and of compliance certificate of with compliance the order with 2.1 the EN 10 order 2042.1 EN 10 204 Sieve base made of stainless steel metal wire cloth mesh width mm mesh width µm 125 510-2788 900 510-2731 112 510-2787 850 510-2730 106 510-2786 800 510-2729 100 510-2785 710 510-2728 90 510-2784 630 510-2727 80 510-2783 600 510-2726 75 510-2782 560 510-2725 71 510-2781 500 510-2724 63 510-2780 450 510-2723 56 510-2779 425 510-2722 53 510-2778 400 510-2721 50 510-2777 355 510-2720 45 510-2776 315 510-2719 40 510-2775 300 510-2718 37,5 510-2774 280 510-2717 35,5 510-2773 250 510-2716 31,5 510-2772 224 510-2715 28 510-2771 212 510-2714 26,5 510-2770 200 510-2713 25 510-2769 180 510-2712 22,4 510-2768 160 510-2711 20 510-2767 150 510-2710 19 510-2766 140 510-2709 18 510-2765 125 510-2708 16 510-2764 112 510-2707 14 510-2763 106 510-2706 13,2 510-2762 100 510-2705 12,5 510-2761 90 510-2704 11,2 510-2760 80 510-2703 10 510-2759 75 510-2702 9,5 510-2758 71 510-2701 9 510-2757 63 510-2700 8 510-2756 56 510-2699 7,1 510-2755 53 510-2698 6,7 510-2754 50 510-2697 6,3 510-2753 45 510-2696 5,6 510-2752 40 510-2695 5 510-2751 38 510-2694 4,75 510-2750 36 510-2693 4,5 510-2749 32 510-2692 4 510-2748 25 510-2691 3,55 510-2747 20 510-2690 3,35 510-2746 3,15 510-2745 2,8 510-2744 2,5 510-2743 2,36 510-2742 2,24 510-2741 2 510-2740 1,8 510-2739 1,7 510-2738 1,6 510-2737 1,4 510-2736 1,25 510-2735 1,18 510-2734 1,12 510-2733 1 510-2732 For more information, please contact your VWR International Sales Office VWR Collection test sieves Inspection Certificate 3.1 according to EN 10204 (together with initial order of sieve) 510-1241 Calibration Certificate 3.1 according to EN 10204 (together with 510-1238 initial order of sieve) 300 x 60 mm Perforated metal plate with square holes mesh width mm 125 510-2829 112 510-2828 106 510-2827 100 510-2826 90 510-2825 80 510-2824 75 510-2823 71 510-2822 63 510-2821 56 510-2820 53 510-2819 50 510-2818 45 510-2817 40 510-2816 37,5 510-2815 35,5 510-2814 31,5 510-2813 28 510-2812 26,5 510-2811 25 510-2810 22,4 510-2809 20 510-2808 19 510-2807 18 510-2806 16 510-2805 14 510-2804 13,2 510-2803 12,5 510-2802 11,2 510-2801 10 510-2800 9,5 510-2799 9 510-2798 8 510-2797 7,1 510-2796 6,7 510-2795 6,3 510-2794 5,6 510-2793 5 510-2792 4,75 510-2791 4,5 510-2790 4 510-2789 Accessories 60 mm nominal height Sieve cover 510-3690 Sieve pan 510-3691 Sieve pan with discharge nozzle (50 mm height) 510-3692 Intermediate pan (sieve frame with solid base) 510-3693 Intermediate ring (sieve frame without base) 510-3694 Sealing ring PVC 510-3696 Sealing ring VITON (-15 C to +200 C) 510-3697 Rubber balls and cubes for faster sieving: Rubber balls dia. 20 mm (for all sieves diameters): 510-3667 Rubber cubes 20 x 20 x 20 mm (for all sieves diameters): 510-3668 23
VWR Collection test sieves 300 x 30 mm VWR VWR Collection test test sieves with with frame made from from stainless steel steel With serial number With serial and number certificate and of certificate compliance of with compliance the order with 2.1 the EN order 10 204 2.1 EN 10 204 Sieve base made of stainless steel metal wire cloth mesh width mm mesh width µm 5,6 510-2648 900 510-2627 5 510-2647 850 510-2626 4,75 510-2646 800 510-2625 4,5 510-2645 710 510-2624 4 510-2644 630 510-2623 3,55 510-2643 600 510-2622 3,35 510-2642 560 510-2621 3,15 510-2641 500 510-2620 2,8 510-2640 450 510-2619 2,5 510-2639 425 510-2618 2,36 510-2638 400 510-2617 2,24 510-2637 355 510-2616 2 510-2636 315 510-2615 1,8 510-2635 300 510-2614 1,7 510-2634 280 510-2613 1,6 510-2633 250 510-2612 1,4 510-2632 224 510-2611 1,25 510-2631 212 510-2610 1,18 510-2630 200 510-2609 1,12 510-2629 180 510-2608 1 510-2628 160 510-2607 150 510-2606 140 510-2605 125 510-2604 112 510-2603 106 510-2602 100 510-2601 90 510-2600 80 510-2599 75 510-2598 71 510-2597 63 510-2596 56 510-2595 53 510-2594 50 510-2593 45 510-2592 40 510-2591 38 510-2590 Perforated metal plate with square holes mesh width mm Cat. No/ 125 510-2689 112 510-2688 106 510-2687 100 510-2686 90 510-2685 80 510-2684 75 510-2683 71 510-2682 63 510-2681 56 510-2680 53 510-2679 50 510-2678 45 510-2677 40 510-2676 37,5 510-2675 35,5 510-2674 31,5 510-2673 28 510-2672 26,5 510-2671 25 510-2670 22,4 510-2669 20 510-2668 19 510-2667 18 510-2666 16 510-2665 14 510-2664 13,2 510-2663 12,5 510-2662 11,2 510-2661 10 510-2660 9,5 510-2659 9 510-2658 8 510-2657 7,1 510-2656 6,7 510-2655 6,3 510-2654 5,6 510-2653 5 510-2652 4,75 510-2651 4,5 510-2650 4 510-2649 Inspection Certificate 3.1 according to EN 10204 (together with initial order of sieve) 510-1241 Calibration Certificate 3.1 according to EN 10204 (together with 510-1238 initial order of sieve) Accessories 30 mm nominal height Sieve cover 510-3690 Sieve pan (60 mm height) 510-3691 Sieve pan with discharge nozzle (60 mm height) 510-3692 Intermediate pan (sieve frame with solid base) (60 mm height) 510-3693 Intermediate ring (sieve frame without base) 510-3695 Sealing ring PVC 510-3696 Sealing ring VITON (-15 C to +200 C) 510-3697 Rubber balls and cubes for faster sieving: Rubber balls dia. 20 mm (for all sieves diameters): 510-3667 Rubber cubes 20 x 20 x 20 mm (for all sieves diameters): 510-3668 24
VWR VWR Collection test test sieves with with frame made made from from stainless steel steel With serial number With serial and number certificate and of certificate compliance of with compliance the order with 2.1 the EN order 10 204 2.1 EN 10 204 Sieve base made of stainless steel metal wire cloth mesh width mm mesh width µm 125 510-2928 900 510-2871 112 510-2927 850 510-2870 106 510-2926 800 510-2869 100 510-2925 710 510-2868 90 510-2924 630 510-2867 80 510-2923 600 510-2866 75 510-2922 560 510-2865 71 510-2921 500 510-2864 63 510-2920 450 510-2863 56 510-2919 425 510-2862 53 510-2918 400 510-2861 50 510-2917 355 510-2860 45 510-2916 315 510-2859 40 510-2915 300 510-2858 37,5 510-2914 280 510-2857 35,5 510-2913 250 510-2856 31,5 510-2912 224 510-2855 28 510-2911 212 510-2854 26,5 510-2910 200 510-2853 25 510-2909 180 510-2852 22,4 510-2908 160 510-2851 20 510-2907 150 510-2850 19 510-2906 140 510-2849 18 510-2905 125 510-2848 16 510-2904 112 510-2847 14 510-2903 106 510-2846 13,2 510-2902 100 510-2845 12,5 510-2901 90 510-2844 11,2 510-2900 80 510-2843 10 510-2899 75 510-2842 9,5 510-2898 71 510-2841 9 510-2897 63 510-2840 8 510-2896 56 510-2839 7,1 510-2895 53 510-2838 6,7 510-2894 50 510-2837 6,3 510-2893 45 510-2836 5,6 510-2892 40 510-2835 5 510-2891 38 510-2834 4,75 510-2890 36 510-2833 4,5 510-2889 32 510-2832 4 510-2888 25 510-2831 3,55 510-2887 20 510-2830 3,35 510-2886 3,15 510-2885 2,8 510-2884 2,5 510-2883 2,36 510-2882 2,24 510-2881 2 510-2880 1,8 510-2879 1,7 510-2878 1,6 510-2877 1,4 510-2876 1,25 510-2875 1,18 510-2874 1,12 510-2873 1 510-2872 For more information, please contact your VWR International Sales Office VWR Collection test sieves Inspection Certificate 3.1 according to EN 10204 (together with initial order of sieve) 510-1241 Calibration Certificate 3.1 according to EN 10204 (together with 510-1238 initial order of sieve) 305 x 60 mm Perforated metal plate with square holes mesh width mm 125 510-3330 112 510-3329 106 510-3328 100 510-3327 90 510-3326 80 510-3325 75 510-3324 71 510-3323 63 510-3322 56 510-3321 53 510-3320 50 510-3319 45 510-3318 40 510-3317 37,5 510-3316 35,5 510-3315 31,5 510-3314 28 510-3313 26,5 510-3312 25 510-3311 22,4 510-3310 20 510-3309 19 510-3308 18 510-3307 16 510-3306 14 510-3305 13,2 510-3304 12,5 510-3303 11,2 510-3302 10 510-3301 9,5 510-3300 9 510-2938 8 510-2937 7,1 510-2936 6,7 510-2935 6,3 510-2934 5,6 510-2933 5 510-2932 4,75 510-2931 4,5 510-2930 4 510-2929 Accessories 60 mm nominal height Sieve cover 510-3698 Sieve pan 510-3699 Sieve pan with discharge nozzle 510-3700 Intermediate ring (sieve frame without base) 510-3701 Sealing ring PVC 510-3696 Sealing ring VITON (-15 C to +200 C) 510-3697 Rubber balls, 20 mm diameter 510-3667 Rubber balls and cubes for faster sieving: Rubber balls dia. 20 mm (for all sieves diameters): 510-3667 Rubber cubes 20 x 20 x 20 mm (for all sieves diameters): 510-3668 25
VWR Collection test sieves 315 x 75 mm VWR VWR Collection test test sieves sieves with with frame frame made made from from stainless steel steel With serial number With serial and number certificate and of certificate compliance of with compliance the order with 2.1 the EN order 10 204 2.1 EN 10 204 Sieve base made of stainless steel metal wire cloth mesh width mm mesh width µm 125 510-1186 900 510-1129 112 510-1185 850 510-1128 106 510-1184 800 510-1127 100 510-1183 710 510-1126 90 510-1182 630 510-1125 80 510-1181 600 510-1124 75 510-1180 560 510-1123 71 510-1179 500 510-1122 63 510-1178 450 510-1121 56 510-1177 425 510-1120 53 510-1176 400 510-1119 50 510-1175 355 510-1118 45 510-1174 315 510-1117 40 510-1173 300 510-1116 37,5 510-1172 280 510-1115 35,5 510-1171 250 510-1114 31,5 510-1170 224 510-1113 28 510-1169 212 510-1112 26,5 510-1168 200 510-1111 25 510-1167 180 510-1110 22,4 510-1166 160 510-1109 20 510-1165 150 510-1108 19 510-1164 140 510-1107 18 510-1163 125 510-1106 16 510-1162 112 510-1105 14 510-1161 106 510-1104 13,2 510-1160 100 510-1103 12,5 510-1159 90 510-1102 11,2 510-1158 80 510-1101 10 510-1157 75 510-1099 9,5 510-1156 71 510-1098 9 510-1155 63 510-1097 8 510-1154 56 510-1096 7,1 510-1153 53 510-1095 6,7 510-1152 50 510-1094 6,3 510-1151 45 510-1093 5,6 510-1150 40 510-1092 5 510-1149 38 510-1091 4,75 510-1148 36 510-1090 4,5 510-1147 32 510-1089 4 510-1146 25 510-1088 3,55 510-1145 20 510-1087 3,35 510-1144 3,15 510-1143 2,8 510-1142 2,5 510-1141 2,36 510-1140 2,24 510-1139 2 510-1138 1,8 510-1137 1,7 510-1136 1,6 510-1135 1,4 510-1134 1,25 510-1133 1,18 510-1132 1,12 510-1131 1 510-1130 Perforated metal plate with square holes mesh width mm 125 510-1228 112 510-1227 106 510-1226 100 510-1225 90 510-1224 80 510-1223 75 510-1222 71 510-1221 63 510-1220 56 510-1219 53 510-1218 50 510-1217 45 510-1216 40 510-1215 37,5 510-1214 35,5 510-1213 31,5 510-1212 28 510-1211 26,5 510-1210 25 510-1209 22,4 510-1208 20 510-1207 19 510-1206 18 510-1205 16 510-1204 14 510-1203 13,2 510-1202 12,5 510-1200 11,2 510-1199 10 510-1198 9,5 510-1197 9 510-1196 8 510-1195 7,1 510-1194 6,7 510-1193 6,3 510-1192 5,6 510-1191 5 510-1190 4,75 510-1189 4,5 510-1188 4 510-1187 Inspection Certificate 3.1 according to EN 10204 (together with initial order of sieve) 510-1241 Calibration Certificate 3.1 according to EN 10204 (together with 510-1238 initial order of sieve) Accessories 75 mm nominal height Sieve cover 510-1233 Sieve pan 510-1234 Sieve pan with discharge nozzle 510-1235 Intermediate ring (sieve frame without base) 510-1236 Rubber balls and cubes for faster sieving: Rubber balls dia. 20 mm (for all sieves diameters): 510-3667 Rubber cubes 20 x 20 x 20 mm (for all sieves diameters): 510-3668 26
VWR VWR Collection test test sieves sieves with with frame frame made made from from stainless steel steel With serial number With serial and certificate number and of certificate compliance of with compliance the order with 2.1 the EN order 10 204 2.1 EN 10 204 Sieve base made of stainless steel metal wire cloth mesh width mm mesh width µm 125 510-3429 900 510-3372 112 510-3428 850 510-3371 106 510-3427 800 510-3370 100 510-3426 710 510-3369 90 510-3425 630 510-3368 80 510-3424 600 510-3367 75 510-3423 560 510-3366 71 510-3422 500 510-3365 63 510-3421 450 510-3364 56 510-3420 425 510-3363 53 510-3419 400 510-3362 50 510-3418 355 510-3361 45 510-3417 315 510-3360 40 510-3416 300 510-3359 37,5 510-3415 280 510-3358 35,5 510-3414 250 510-3357 31,5 510-3413 224 510-3356 28 510-3412 212 510-3355 26,5 510-3411 200 510-3354 25 510-3410 180 510-3353 22,4 510-3409 160 510-3352 20 510-3408 150 510-3351 19 510-3407 140 510-3350 18 510-3406 125 510-3349 16 510-3405 112 510-3348 14 510-3404 106 510-3347 13,2 510-3403 100 510-3346 12,5 510-3402 90 510-3345 11,2 510-3401 80 510-3344 10 510-3400 75 510-3343 9,5 510-3399 71 510-3342 9 510-3398 63 510-3341 8 510-3397 56 510-3340 7,1 510-3396 53 510-3339 6,7 510-3395 50 510-3338 6,3 510-3394 45 510-3337 5,6 510-3393 40 510-3336 5 510-3392 38 510-3335 4,75 510-3391 36 510-3334 4,5 510-3390 32 510-3333 4 510-3389 25 510-3332 3,55 510-3388 20 510-3331 3,35 510-3387 3,15 510-3386 2,8 510-3385 2,5 510-3384 2,36 510-3383 2,24 510-3382 2 510-3381 1,8 510-3380 1,7 510-3379 1,6 510-3378 1,4 510-3377 1,25 510-3376 1,18 510-3375 1,12 510-3374 1 510-3373 For more information, please contact your VWR International Sales Office VWR Collection test sieves Inspection Certificate 3.1 according to EN 10204 (together with initial order of sieve) 510-1242 Calibration Certificate 3.1 according to EN 10204 (together with initial order of sieve) 510-1239 350 x 60 mm Perforated metal plate with square holes mesh width mm 125 510-3470 112 510-3469 106 510-3468 100 510-3467 90 510-3466 80 510-3465 75 510-3464 71 510-3463 63 510-3462 56 510-3461 53 510-3460 50 510-3459 45 510-3458 40 510-3457 37,5 510-3456 35,5 510-3455 31,5 510-3454 28 510-3453 26,5 510-3452 25 510-3451 22,4 510-3450 20 510-3449 19 510-3448 18 510-3447 16 510-3446 14 510-3445 13,2 510-3444 12,5 510-3443 11,2 510-3442 10 510-3441 9,5 510-3440 9 510-3439 8 510-3438 7,1 510-3437 6,7 510-3436 6,3 510-3435 5,6 510-3434 5 510-3433 4,75 510-3432 4,5 510-3431 4 510-3430 3,55 Accessories 60 mm nominal height Sieve cover 510-3702 Sieve pan 510-3703 Sieve pan with discharge nozzle 510-3704 Intermediate ring (sieve frame without base) 510-3705 Sealing ring PVC 510-3706 Sealing ring VITON (-15 C to +200 C) 510-3707 Rubber balls and cubes for faster sieving: Rubber balls dia. 20 mm (for all sieves diameters): 510-3667 Rubber cubes 20 x 20 x 20 mm (for all sieves diameters): 510-3668 27
VWR Collection test sieves 400 x 65 mm VWR VWR Collection test test sieves sieves with with frame frame made made from from stainless steel steel With serial number With and serial certificate number and of compliance certificate of with compliance the order with 2.1 the EN order 102.1 204EN 10 204 Sieve base made of stainless steel metal wire cloth mesh width mm mesh width µm 125 510-3569 900 510-3512 112 510-3568 850 510-3511 106 510-3567 800 510-3510 100 510-3566 710 510-3509 90 510-3565 630 510-3508 80 510-3564 600 510-3507 75 510-3563 560 510-3506 71 510-3562 500 510-3505 63 510-3561 450 510-3504 56 510-3560 425 510-3503 53 510-3559 400 510-3502 50 510-3558 355 510-3501 45 510-3557 315 510-3500 40 510-3556 300 510-3499 37,5 510-3555 280 510-3498 35,5 510-3554 250 510-3497 31,5 510-3553 224 510-3496 28 510-3552 212 510-3495 26,5 510-3551 200 510-3494 25 510-3550 180 510-3493 22,4 510-3549 160 510-3492 20 510-3548 150 510-3491 19 510-3547 140 510-3490 18 510-3546 125 510-3489 16 510-3545 112 510-3488 14 510-3544 106 510-3487 13,2 510-3543 100 510-3486 12,5 510-3542 90 510-3485 11,2 510-3541 80 510-3484 10 510-3540 75 510-3483 9,5 510-3539 71 510-3482 9 510-3538 63 510-3481 8 510-3537 56 510-3480 7,1 510-3536 53 510-3479 6,7 510-3535 50 510-3478 6,3 510-3534 45 510-3477 5,6 510-3533 40 510-3476 5 510-3532 38 510-3475 4,75 510-3531 36 510-3474 4,5 510-3530 32 510-3473 4 510-3529 25 510-3472 3,55 510-3528 20 510-3471 3,35 510-3527 3,15 510-3526 2,8 510-3525 2,5 510-3524 2,36 510-3523 2,24 510-3522 2 510-3521 1,8 510-3520 1,7 510-3519 1,6 510-3518 1,4 510-3517 1,25 510-3516 1,18 510-3515 1,12 510-3514 1 510-3513 Perforated metal plate with square holes mesh width mm 125 510-3610 112 510-3609 106 510-3608 100 510-3607 90 510-3606 80 510-3605 75 510-3604 71 510-3603 63 510-3602 56 510-3601 53 510-3600 50 510-3599 45 510-3598 40 510-3597 37,5 510-3596 35,5 510-3595 31,5 510-3594 28 510-3593 26,5 510-3592 25 510-3591 22,4 510-3590 20 510-3589 19 510-3588 18 510-3587 16 510-3586 14 510-3585 13,2 510-3584 12,5 510-3583 11,2 510-3582 10 510-3581 9,5 510-3580 9 510-3579 8 510-3578 7,1 510-3577 6,7 510-3576 6,3 510-3575 5,6 510-3574 5 510-3573 4,75 510-3572 4,5 510-3571 4 510-3570 Inspection Certificate 3.1 according to EN 10204 (together with initial order of sieve) Calibration Certificate 3.1 according to EN 10204 (together with initial order of sieve) 510-1242 510-1239 Accessories 60 mm nominal height Sieve cover 510-3708 Sieve pan 510-3709 Sieve pan with discharge nozzle 510-3710 Intermediate pan (sieve frame with solid base) 510-3711 Intermediate ring (sieve frame without base) 510-3712 Sealing ring PVC 510-3713 Sealing ring VITON (-15 C to +200 C) 510-3714 Rubber balls and cubes for faster sieving: Rubber balls dia. 20 mm (for all sieves diameters): 510-3667 Rubber cubes 20 x 20 x 20 mm (for all sieves diameters): 510-3668 28
For more information, please contact your VWR International Sales Office TS 540 - Ultrasonic cleaner for sieve cleaning Ultrasonic Baths Elma ultrasonic cleaner The multiple use unit for laboratories and practices. Designed for the intensive cleaning of laboratory instruments, glass, probes, scalpels and of analytical and micro-precision sieves and similar items. Cleaning of 1 lab sieve at a time Powerful through two broad beam sandwich transducer systems Easy operation, through timer and handles Ultrasonic frequency (khz) 35 Power requirement (W)(without heating) 160 Ultrasonic peak output (W) 320 Voltage (Vac) 115/230 Power frequency (Hz) 50/60 Mains connection 1 Ph. prot. earth Timer 1-15 min/continuous Outer dimensions of unit w/d/h (mm) 300 x 280 x 285 mm Inner dimensions of tank ø/h (mm) 240 x 145 Tank capacity (litres) 6,4 Drain - Weight (ca. kg) 4,4 Material tank Stainless steel Material casing Stainless steel CE Guideline 73/23 EWG (EEC) CE Guideline 89/336 EWG (EEC) Ordering information TS 540 230V 142-2105 Stainless steel lid 142-2112 Stainless steel basket (mm) 215/45 142-2172 Additional accessories on request 29
Ultrasonic Baths Elma ultrasonic baths Elmasonic S 300 (H) Ultrasonic cleaning unit Technical specifications Mains voltage (Vac) 100-120 V/220-240 V Mains frequency (Hz) 50/60 Ultrasonic frequency (khz) 37 Power consumption total (W) 300 Power consumption total (W) 1500 Ultrasonic power effective (W) 300 Ultrasonic peak performance max.(w) 1200 Heating power (units w. heating) (W) 1200 Unit outer dimensions W/D/H (mm) 568/340/321 Tank internal dimensions W/D/H (mm) 505/300/200 Max. filling volume tank (lit./gal.) 28/7.4 Weight (kg) 11 Material tank stainless steel Material casing stainless steel Drain 3/8 Carrying handles plastic 89/336 EWG (EEC) CE directives and 73/23 EWG (EEC) Protection class IP 20 The new Elmasonic S units are available in 16 different sizes ranging from 0,5 litres to 90 litres. State-of-the-art microprocessor controlled ultrasonic cleaning and sweep technology. The user-friendly LED display ensures an excellent operation. Further advantages High performance 37 khz sandwich transducer systems Cleaning tank made of cavitation-resistant stainless steel User-friendly and clear operating panel, splash water proof LED Display showing set and remaining time of cleaning period Turning knob for setting continued and short-period operation from 1 to 30 min Temperature controlled ultrasonic operation (applies only for units with heating) Sweep function for an optimised sound field distribution in the cleaning liquid by frequency modulation Degas function for the efficient degassing of the cleaning liquid and for laboratory purposes Auto degas function for automatic degassing cycles, i.e. with fresh cleaning liquids Dry run protected heating (applies only for units with heating) Turning knob temperature (applies only for units w. heating). Temperature range variable in 5 ºC steps from 30 º up to 80 ºC LED Display for pre-set and actual temperature (applies only for units with heating) Plastic carrying handles, heat conducting Turning knob for tank drainage at side of unit for simple get effective draining of tank Diameter Elmasonic S 300 142-0035 Elmasonic S 300 H 142-0020 Basket stainless steel 142-0030 Lid (plastic) 142-0025 Sieve rotation holder SRH 4/200 with integrated rotation for Elma ultrasonic cleaning units S 300 (H) Technical Data SRH 4/200 Mains Voltage (Vac) 220-240 Vac or 100-120 V Supply Frequency (Hz) 50/60 Outer dimensions 580 x 260 x 300 w/d/h (mm) Weight (ca. kg) 5,75 Construction Stainless steel Time and money saving yet intensive cleaning of analytical sieves Simultaneous cleaning of up to 4 sieves at once (dia. 200 mm) Sieves from different producers can be cleaned at the same time - simple to operate, no installation required - made from hygienic and easy to clean stainless steel - dirt and contaminants collect on bottom of tank, not in other sieves - no damage to sieves; web tension and mesh size are not affected by ultrasonic cleaning Elma accessory SRH 4/200 142-0041 30
For more information, please contact your VWR International Sales Office NIST Traceable sieve standards VWR - Haver sieve shakers Ultrasonic cleaner for sieve cleaning Unique microsphere method of sieve calibration applicable to all sieves from 20-3350 µm. Mean aperture size traceable to NIST and NPL. Method analyses over 80% of the sieve surface Results independent of sieve shaking method No need to send sieves away for calibration Accuracy and repeatability better than 1 µm Typical calibration time of about 1 minute Single shot bottles remove operator bias 5 tests per pack For sieve size Calibration range 20 µm 19 24 µm 510-0166 25 µm 22 30 µm 510-0167 32 µm 28 34 µm 510-0168 38 µm 34 41 µm 510-0169 45 µm 42 50 µm 510-0170 53 µm 48 59 µm 510-0171 63 µm 57 70 µm 510-0172 75 µm 67 83 µm 510-0173 90 µm 79 97 µm 510-0174 106 µm 91 117 µm 510-0175 125 µm 112 140 µm 510-0176 150 µm 134 167 µm 510-0177 180 µm 161 200 µm 510-0178 212 µm 191 237 µm 510-0179 250 µm 226 281 µm 510-0180 300 µm 270 333 µm 510-0181 355 µm 322 398 µm 510-0182 425 µm 377 470 µm 510-0183 500 µm 440 557 µm 510-0184 600 µm 526 657 µm 510-0185 710 µm 648 809 µm 510-0186 850 µm 774 950 µm 510-0187 Please enquire for other standards not listed here 31