Agrosky EVOLVING AGRICULTURE.
Saving time and resources. Bout after bout. Advantages Overlapping bouts and missed areas are avoided Cost savings of up to 15 per cent for fertilisers, crop protection chemicals and seed Fewer working hours, consequential fuel saving (up to 20 per cent) and reduced work costs Much less driver fatigue at night and in poor weather conditions Improved utilisation of driver / tractor and implement train Yield gain 6m 6m 6m 1st/2nd day 18 m After 4 weeks After 1 year Precise lane driving without overlapping or areas missed in any kind of weather, day and night. Precise application of seeds, then some four weeks later: safe, accurate application of pesticides or fertilisers always in the same tracks. Even after a whole year the tracks can be found again without any problems. Increasing yields and decreasing work management costs these are the objectives of modern farmers along with savings in the use of consumables, seeds, fertiliser and crop protection agents. Already, for many years in fact, DEUTZ-FAHR has been pursuing a consistent strategy to optimise the operational technology of its tractors. Even if the tractor and the attached implements are harmonised to each other in an ideal manner, it may happen that tracks or tram-lines are not absolutely parallel, maybe as a result of the weather, soil condition, topography and / or concentration of the driver. The consequences can be overlapping bouts or areas missed, resulting in unequal plant growth and thus loss in yield. Particularly in bad visibility, the satellitebased automatic steering guide (ASG) is a perfect addition, enabling accurate tractor / implement operating widths to be maintained; with this accuracy seed and chemicals can also be saved. The tractor travels accurately along its tracks, time after time, always precisely parallel to the first reference track. The driver can concentrate entirely on controlling the operation and the setting of the implements. Cost cutting depending on the precision 2 At a precision of +/- 2 cm, ASG offers most savings.
edge And ontrac2 : the right track clearly Before your face. ADVANTAGEs simple installation and removal of the individual components Modular system of optical track guiding, mechanical steering wheel control or integrated hydraulic control Precision of ± 30 to ± 2 cm depending on which model is chosen Clearly arranged and user friendly TFT colour terminal Different menus and individual programming of section widths The colour monitor EDGE has appealing and clearly arranged graphics. EDGE or OnTrac2 monitor with partial amplitude control. simply installed and ready to use: The mechanical control of the steering wheel OnTrac2 that can be also quickly installed on another tractor or combine harvester. When driving into the track, the programmed partial amplitudes are automatically activated. The antenna for EDGE und OnTrac2 is easily attached by a magnet to the roof of the tractor. Also a yield mapping function can be included. The tasks and operating widths used in modern agriculture require high concentration from the tractor driver. Few diversified applications tire the eyes when monitoring the invariable procedures and tracks. Simultaneously, in maintaining the track, is not possible to concentrate on all functions of spraying fi elds and the sowing machines. Thus, there is always a demand on the driver. Here, a track guiding system, whether optical or automatic, offers not only comfortable safety but relieves the driver and immediately helps to economize. Fields are cultivated effectively, seed sown accurately, fertiliser and chemicals applied without wastage, crops grow better and costs controlled. Optimum selection With their Agrosky program, DEUTZ- FAHR has the solution to suit your need. With the monitor and antenna, simple optical track guidance is offered that guides the driver and, therefore, the tractor, over the fi eld with a precision of ± 30 cm. steering on Demand The next step is represented through the addition of automatic steering. A selection of various solutions are offered. Option 1 the mechanical solution: Here, a mechanical drive for the steering wheel is easily and conveniently fi tted. It can also be transferred to another tractor at any time. Thus, several different tractors can be guided using one system. Option 2 the automatic steering can be integrated in the tractor's hydraulic steering system. Depending on the receiver and correction signal used, a steering precision of ± 30 to ± 2 cm is achieved. 4 5
ASG and AF Tracker: Straight as an arrow from A to B. Again and again. Advantages Easy programming of the tracks Storage and retrieval of track patterns Large, clearly arranged and colour touchscreen operating terminal, with simple menu guidance Easy and individual adaptation to all implements used track accuracy by means of the RTK signal Absolute repeatability of the tracks using ground signal, even after many years of use Easy operation and installation on the tractor Application is possible for special crops as no plants are damaged because of the high steering precision Unbeatable operation in hilly terrain on account of the topography compensation The Agrosky ASG from DEUTZ-FAHR offers a precision of ± 2 cm and a repeatability of the tracks for each process throughout the agricultural calendar, thanks to the application of the RTK signal The operation of Agrosky ASG tracking system is as easy as falling off a log. The driver enters the operating width of the implement used by means of the userfriendly touchscreen; then he drives to the beginning of the requested track, marks the point, drives to the end of the track, enters another mark, and immediately the system starts calculating all other exactly parallel runs. Depending on the work to be carried out, the input control icons can be used to call default track patterns. The operator drives the tractor into the track, and Agrosky ASG takes over the steering. Shortly before the headland is reached, a signal is sounded, the driver turns the tractor around and the ASG is activated again. There cannot be anything easier. By means of the new auto-contour function, the driver can even enter individual winding tracks. Thus, Agrosky ASG is the only system that can take all topographical conditions into consideration perfectly. 1 Antenna 2 Steering valve 3 Steering angle sensor 4 Touch screen 5 Control unit 1 The user-friendly clearly arranged touch screen with its coloured input icons is a real gem. In order to prevent the implement to drift off in hilly terrain, Agrosky AF Tracker ensures a precise guidance of the implement. The implement is guided safely in the tractor's tracks by using guiding discs which reach into the soil by up to 20 cm. 4 5 2 3 The GPS receiver and transmission dual-antenna is simply attached onto the cabin roof. The tractor position is measured in real-time by the control unit. Using the ground correction signal, the DEUTZ-FAHR Agrosky ASG attains a track precision of ± 2 cm. Simple and consolidated installation of all components in a short time. The driver always sees the position and track of the tractor. The driver can enter free contours individually; even standard tracks can be called automatically. 7
always precise from 30 to 2 cm. Product overview Agrosky. Agrosky system EDGE EDGE OnTrac2 ASG / AF Tracker Guidance optical automatic, mechanical or hydraulic Precision ± 30 cm ± 30 to ± 2 cm ± 2 cm Recommended applications Manure spreading Tillage Fertilizer spreading Mowing, swathing Lime spreading Drilling Row manuring Grain harvesting Maintenance row cultivation Vegetable cultivation overview correction signals Agrosky system Edge OnTrac2 ASG / AF Tracker Signal EGNOS OMNISTAR HP Mobile base station Fixed base station Technology ESA Private service Reference station Reference station Continuous fees free 1.500 per year Radio license Radio license Inaccuracy when repeated after 15 min. 15-30 cm 10 cm 2 cm with ASG 2-3 cm with ASG Availability Europe Worldwide Mobile, radius 5 km Fixed base station radius 15 km Your DEUTZ-FAHR dealer will be pleased to answer your questions: www.trio-b.com SDFL201-682 Leo 1109 This printed material is designed for international use. The illustrations it contains show both special equipment and incomplete standard equipment. The availability of some illustrated models, standard and special equipment can vary from country to country. Only the dealer s price list stipulates whether such illustrated equipment is included as a standard feature or whether it is a special accessory. In addition the illustrated mounted implements and special accessories may not always comply with the respective statutory regulations. It is the responsibility of the customer after consultation with the dealer to verify this, taking the operating instructions into account. All information and illustrations in this brochure are subject to correction; errors excepted. Furthermore all information contained in this brochure is not binding and is subject to modifications of a technical and commercial nature or those resulting from statutory regulations. No claims whatsoever can be derived from these. SAME DEUTZ-FAHR DEUTSCHLAND GmbH reserves the right to make any changes to the design and technical construction and also the scope of standard equipment at any time and without prior notice. Order no.: 932-10-01 SAME DEUTZ-FAHR DEUTSCHLAND GmbH, D-89415 Lauingen, www.deutz-fahr.de EVOLVING AGRICULTURE.