ICC-ES Report PMG-1454 Issued 10/2017 This report is subject to renewal 10/2018 EVALUATION SUBJECT: CERAMIC PLUMBING FIXTURES DIVISION: 22 00 00 PLUMBING SECTION: 22 40 00 PLUMBING FIXTURES 22 09 00 INSTRUMENTATION AND CONTROL FOR PLUMBING Report Holder: COBBAN ENTERPRISES LTD 2413 WEYMOUTH PLACE NORTH VANCOUVER, BC CANADA
ICC-ES PMG Product Certificate PMG-1454 Effective Date: October 2017 This listing is subject to re-examination in one year. www.icc-es-pmg.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council CSI: DIVISION: 22 00 00 PLUMBING Section: 22 40 00 Plumbing Fixtures Section: 22 09 00 Instrumentation and Control for Plumbing Product certification system: The ICC-ES product certification system includes testing samples taken from the market or supplier s stock, or a combination of both, to verify compliance with applicable codes and standards. The system also involves factory inspections, and assessment and surveillance of the supplier s quality system Product: Listee: Ceramic Plumbing Fixtures Cobban Enterprises Ltd. 2413 Weymouth Place North Vancouver, British Columbia Canada Compliance with the following codes: 2015, 2010 and 2005 National Plumbing Code of Canada ** **National Plumbing Code of Canada is a copyrighted publication of National Research Council Canada Compliance with the following standards: Identification: ASME A112.19.2-2013/CSA B45.1-2013 Plumbing Fixtures Each plumbing fixture must be permanently and legibly marked with the following: 1) Manufacturer s name or registered trademark or, in case of private labelling, the name of the customer for whom the fixture was manufactured. 2) ICC-ES PMG listing mark. Water closets and urinals shall be marked with the water consumption in GPF and LPF. Water closets shall be additional marked with 1) the model number, 2) A water level mark (gravity flush tanks only), Packaging of each plumbing fixture must be marked with the: a) Manufacturer s name or registered trademark or, in case of private labelling, the name of the customer for whom the fixture was manufactured. b) number Packaging for water closets and urinals shall be marked with the water consumption in GPF and LPF. Listings are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed as an endorsement of the subject of the listing or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as to any finding or other matter in this listing, or as to any product covered by the listing. Copyright 2017 ICC Evaluation Service, LLC. All rights reserved. Page 1 of 5
PMG-1454 Most Widely Accepted and Trusted Page 2 of 5 Installation: : Fixtures are to be installed in accordance with the manufacturer's instructions and the applicable code. A water closet, urinal, lavatory or bidet shall not be set closer than 15 inches (381 mm) from its center to any side wall, partition, vanity or other obstruction, or closer than 30 inches (762 mm) center to center between adjacent fixtures. There shall be not less than a 21-inch (533 mm) clearance in front of the water closet, urinal, lavatory or bidet to any wall, fixture or door. Water closet compartments shall be not less than 30 inches (762 mm) in width and not less than 60 inches (1524 mm) in depth for floor- mounted water closets and not less than 30 inches (762 mm) in width and 56 inches (1422 mm) in depth for wall- hung water closets. Duval Bathworks Brand Name Drop-In Lavatories Name Description Drillings 01DLO2017 CALLA 20.25" x 17.25" Oval Drop-In Lavatory 4", 8", SH 02DLO2017 CULTUS 20.3" x 17.1" Oval Drop-In Lavatory 4", 8", SH 03DLR19 DODD 19" Round Drop-In Lavatory 4", 8", SH 04DLT2519 HARRISON 19.2" Round Drop-In Lavatory 4", 8", SH 05DLO2319 LOIS 22.8" x 19.1" Oval Drop-In Lavatory 4", 8", SH 06DLO2319 MORRIS 22.8" x 19.0" Oval Drop-In Lavatory 4", 8", SH 07DLO2218 FINLAY 22.4" x 18.1" Drop-In Lavatory 4", 8", SH 08DL2318 QUEEN 23.2" x 18.1" Drop-In Lavatory 4", 8", SH 09DL1714 PROPER 16.7" x 13.8" Drop-In Lavatory 4", 8", SH Pedestal Lavatories Name Description Drillings 10L2319 10P35 GEORGIA 23.3" x 18.8" x 35.4" Pedestal Lavatory 4", 8", SH 11L2621 11P35 HOWE 26.0" x 20.9" x 37.2" Pedestal Lavatory 8" 12L2820 12P35 DEAN 28.0" x 20.3" x 34.5" Pedestal Lavatory 4", 8", SH 13L3222 13P2 MEMORY 31.9" x 21.5" x 39.8" Console Lavatory with Legs 4", 8", SH 14L2621 14P34 KNIGHT 26.4" x 21.3" x 34.3" Pedestal Lavatory 4", 8", SH 15L1917 15P36 BUTE 19.3" x 17.3" x 35.6" Pedestal Lavatory 4", SH 16L2218 16P36 FRASER 21.6" x 18.3" x 36.4" Pedestal Lavatory 4", 8", SH 17L2318 17P35 BESA 23.0" x 18.1" x 35.2" Pedestal Lavatory 4", 8", SH 07L2720 07P36 FINLAY 27.0" x 20.1" x 35.6" Pedestal Lavatory 4", 8", SH 07LC2520 07PC36 FINLAY 24.8" x 19.9" x 36.4" Corner Pedestal Lavatory 4" 07L2218 07PM36 FINLAY 22.4" x 17.5" x 35.7" Mini Pedestal Lavatory 4" 08L2620 08P34 QUEEN 26.4" x 19.6" x 33.7" Square Pedestal Lavatory 4", 8", SH 09L2621 09P34 PROPER 26.0" x 21.1" x 34.0" Pedestal Lavatory 4", 8", SH 09L2218 09PM35 PROPER 21.9" x 18.2" x 34.5" Mini Pedestal Lavatory 4" Under Mount Lavatories Name Description Drillings
PMG-1454 Most Widely Accepted and Trusted Page 3 of 5 UL2014 UL2017OV 20.2" x 14.3" Rectangular Under Mount Lavatory with Installation Clips 19.8" x 16.6" Oval Under Mount Lavatory with Installation Clips Vessel Lavatories Name Description Drillings 18VL18R STAVE 18.1" Round Vessel Lavatory No Drill 19VL18TL Tri-Layer 18.1" Round Vessel Lavatory Closed Back SH 20VL16R NIMPO 16.2" Round Bowl Vessel Lavatory No Drill 21VL17R BUNTZEN 17.0" Round Vessel Lavatory No Drill 22VL1815 ALTA 18.4" x 14.6" Rectangular Vessel Lavatory SH 23VL2020 AZURE 20" Square Vessel Lavatory 4", 8", SH 24VL18R BABINE 18.25" Round In/Out Vessel Lavatory No Drill 25VL18HX BERG 17.5" Hexagon Vessel Lavatory No Drill 26VL17BK DOUGLAS Bucket 16 1/2" Round Vessel Lavatory No Drill Wall Hung Lavatories Name Description Drillings 27WH2018 COLUMBIA ADA' 20.3" x 18.1" Wall Hung Lavatory 4", 8", SH 28WH1917 CHEHALIS 19.1" x 16.9" Wall Hung Lavatory 4", 8", SH One-Piece Toilets BT1016ESF BT1115ESF BT1215ETDF BT1316ETDF Name Description GPF Class GROUSE ROBSON ROBSON NELSON Elite Elongated 3 1/4" Flush Valve One Piece Toilet with Deluxe Fittings, SIDE FLUSH 15 Elongated 3 1/4" Flush Valve One Piece Toilet, SIDE FLUSH 15 Elongated 3 1/4" Flush Valve One Piece Toilet, TOP Dual Flush Comfort Height 16 1/2" Elongated, 3 1/4" Flush Valve One Piece Toilet, TOP Dual Flush 1.60 L/C 1.28 HET 1.55 / 0.95 HET 1.55 / 1.05 HET Two-Piece Toilets Name Description GPF Class B3115R T30338 COULOIR 15 ROUND FRONT BOWL, 2 Siphon Jet with 3 Flapper, 3.8L TANK 1.0 HET B3115E T30338 COULOIR 15 ELONGATED FRONT 2 Siphon Jet with 3 Flapper, 3.8L TANK 1.0 HET B3118E T30338 COULOIR 18 ELONGATED FRONT, 3.8L TANK 1.0 B3315R T33006 SANFORD 15 Round Front, 2" Siphon Jet, 6L TANK 1.6 L/C B3315E T33006 SANFORD 15 Elongated FRONT, 2" Siphon Jet, 6 L TANK 1.6 L/C B3315R T33036 SANFORD 15 Round Front, 2 Siphon Jet, 6 L TANK 1.6 L/C B3315E T33036 SANFORD 15 Elongated FRONT, 2" Siphon Jet, 6 L TANK 1.6 L/C B3416E T34036 SANFORD Comfort Height 16 1/2" Elongated, 2" Siphon Jet, 6 L TANK 1.6 L/C B3015R T30548 15 Round Front, 2" Siphon Jet with 3 Flapper, 4.8 L B3015E 15 Elongated FRONT, 2" Siphon Jet with 3 T30548 B3015R T30348 Flapper, 4.8 L 15 Round Front, 2" Siphon Jet with 3 Flapper, 4.8 L
PMG-1454 Most Widely Accepted and Trusted Page 4 of 5 B3015E T30348 15 Elongated FRONT, 2" Siphon Jet with 3 Flapper, 4.8L Comfort Height 16.5" Elongated FRONT, 2" Siphon Jet with 3 Flapper, 4.8L Comfort Height 16 1/2" Elongated FRONT, 2" Siphon Jet, 6L TANK 1.60 L/C 'ADA' 18" Elongated FRONT, 2" Siphon Jet, 6L TANK 1.60 L/C B3016E T30348 B3416E T30036 ROBSON B3418E T30036 ROBSON B3515R T36006 PEAK 15 Round Front, 2" Siphon Jet, 6L TANK 1.60 L/C B3614R T37348 B3616E T37348 B3614E T37348 B3716E T40348 B3716E T4001DF B3718E T40348 B3216R T32348 B3216R T410DF B3216E T32348 B3816E T410DF FORBES FORBES FORBES DAWSON DAWSON DAWSON 14 Round Front, 2" Siphon Jet, 1.28 Gallon, 4.8 L Comfort Height 16 1/2" Elongated FRONT, 2" Siphon Jet, 1.21 Gallon 4.8 L 14 Elongated, 2" Siphon Jet, 1.28 Gallon, 4.8L Comfort Height 16 1/2" Elongated, 2" Siphon Jet Toilet with 3" Flapper, 4.8L TANK 1.60 L/C Comfort Height 16 1/2" Elongated, 2" Siphon Jet with 3" Flapper, Dual Flush 1.28 / 1.0 HET ADA' 18" Elongated, 2" Siphon Jet with 3" Flapper, 4.8L TANK 1.60 L/C Comfort Height 16 1/2" Round Front, 2 1/8" Siphon Jet with 3" Flapper and Pedestal Flush Valve, 4.8L Comfort Height 16 1/2" Round Front, 2 1/8" Siphon Jet with 3" Flapper and Pedestal Flush Valve, Dual Flush 1.28 / 1.0 HET Comfort Height 16 1/2" Elongated FRONT, 2 1/8" Siphon Jet with 3" Flapper and Pedestal Flush Valve, 4.8L Comfort Height 16 1/2" Elongated FRONT, 2 1/8" Siphon Jet with 3" Flapper and Pedestal Flush Valve, Dual Flush 1.28 / 1.0 HET B0715E T076 FINLAY 15 Elongated FRONT, 6L TANK 1.60 L/C B0915R T0948 PROPER Round Front Toilet with Flat Lid, 6 L TANK 1.60 L/C B0915E T0906 PROPER Elongated Toilet with Back Splash Lid, 6 L TANK 1.60 L/C B4314R T4306 BELLA 14 Round Front,6 L TANK 1.60 L/C Ready-To-Go Toilets Name Description GPF Class CBT1115ESF ROBSON Elongated 3 1/4" Flush Valve One Piece Toilet 1.28 HET CBT1215ETDF Elongated 3 1/4" Flush Valve One Piece Toilet, Dual Flush 1.55 / 0.95 HET ROBSON CBT4314R4306 BELLA 'ADA' High Boy Ht. 18" Elongated, Siphon Jet 1.60 L/C CBT3115R30338 COULOIR RF 2 Siphon Jet with 3 Flapper, 3.8L TANK 1.0 HET CBT3115E30338 COULOIR EL 2 Siphon Jet with 3 Flapper 3.8 L TANK 1.0 HET CBT3315R33006 SANFORD Round Front, 2" Siphon Jet 6L TANK 1.55 L/C CBT3315E33006 SANFORD Elongated, 2" Siphon Jet, 6 L TANK 1.50 L/C CBT3315R33036 SANFORD Round Front, 2" Siphon Jet 6 L TANK 1.50 L/C CBT3315E33036 SANFORD Elongated, 2" Siphon Jet 6 L TANK 1.55 L/C CBT3015R30548 Round Front, 2" Siphon Jet with 3 Flapper, 4.8 L CBT3015E30548 CBT3015R30348 Elongate, 2" Siphon Jet with 3 Flapper, 4.8L Round Front, 2" Siphon Jet with 3 Flapper, 4.8L
PMG-1454 Most Widely Accepted and Trusted Page 5 of 5 CBT3015E30348 Elongated, 2" Siphon Jet with 3 Flapper, 4.8L CBT3016E30348 Comfort Height 17 1/8" Elongated, 2" Siphon Jet with 3 Flapper 4.8L CBT3416E30036 Comfort Height 16 1/2" Elongated, 2" Siphon Jet ROBSON 6 L TANK 1.55 L/C CBT3515R36006 PEAK Round Front, 2" Siphon Jet 6L TANK 1.60 L/C CBT3614R37348 FORBES Round Front, 2" Siphon Jet 4.8 L CBT3616E37348 Comfort Height 16½" Elongated, 2" Siphon Jet, FORBES 1.21 Gallon 4.8 L CBT3614E37348 FORBES Elongated, 2" Siphon Jet 4.8 L CBT3716E40348 Comfort Height 16½" Elongated, 2" Siphon Jet DAWSON Toilet with 3" Flapper 4.8 L 1.60 L/C CBT3716E4001DF Comfort Height 16½" Elongated, 2" Siphon Jet DAWSON with 3" Flapper, Dual Flush 1.24 / 0.92 HET CBT3718E40348 ADA' 18" Elongated, 2" Siphon Jet with 3" DAWSON Flapper 4.8L TANK 1.60 L/C CBT3216R32348 Comfort Height 16½" Round Front, 2-1/8" Siphon Jet with 3" Flapper and Pedestal Flush Valve 4.8 L CBT3216R410DF CBT3216E32348 CBT3816E410DF Flush Valve Toilets Comfort Height 16½" Round Front, 2-1/8" Siphon Jet with 3" Flapper and Pedestal Flush Valve, Dual Flush 1.24 / 0.95 HET Comfort Height 16½" Elongated, 2-1/8" Siphon Jet with 3" Flapper and Pedestal Flush Valve, 4.8 Comfort Height 16 1/2" Elongated, 2 1/8" Siphon Jet with 3" Flapper and Pedestal Flush Valve, Dual Flush 1.24 / 1.03 HET Name Description GPF Class B4415R48 Elongated Flush Valve Toilet 1.28 HET B4415E48 Comfort Height 16 3/4 Elongated Flush Valve Toilet 1.28 HET Urinals SU01WH Washout Wall Hung Siphon Jet Urinal with ¾ Inlet Spud & 2 Outlet Spud 0.13 HET Conditions of Listing: 1. The products recognized in this listing must be installed in accordance with the manufacturer s published installation instructions and the applicable code. 2. The products recognized in this listing are manufactured by under a quality control program with annual surveillance inspections by ICC-ES.