Tabelle A-a Standardmineralöle für FLENDER Stirnrad-, Kegelrad-, Planetengetriebe und 'Marinegetriebe ohne Lamellenkupplung' sowie Getriebemotoren

Similar documents
Table A-c Standard PAO oils for FLENDER helical, bevel-helical, planetary gear boxes and 'Marine gear units without multi-disk clutches'

Section 3.1. Machine Maintenance - Machine Maintenance Information. Important Preventive Maintenance Information: Maintenance Charts & Diagrams:

5 Lubrication, Cooling and Heating

Catalogue geared motors. Edition 01/

5 Gear units, types of installation, lubricant quantities. 5.1 Standard fitting positions/ types of installation for Bauer geared motors

5 Lubricants. Lubricants Guidelines for lubricant selection. 5.1 Guidelines for lubricant selection STOP

5 Lubrication, Cooling, and Heating

Installation and Maintenance Helical and Bevel Helical Gearboxes KUMERA POWER TRANSMISSION GROUP

RFP # 6632 EXHIBIT 3 Technical Specifications Supply of Wärtsilä Gas Engine Lubrication Oil and Cooling System Glycol

Section 3.1. Machine Maintenance - Machine Maintenance Information

DIWA List of Approved Oils Oil Change Interval 120,000 km

LUBRICATION OIL LIST FOR SIMPLEX STERN TUBE BUSHES, INTERMEDIATE SHAFT BEARINGS AND SEALS

GEARED MOTOR UNITS R, S, F, K SERIES INSTALLATION & MAINTENANCE GUIDE

Addendum to the Assembly and Operating Instructions

Operating Instructions

Addendum to the Assembly and Operating Instructions

INDUSTRIAL REDUCER UNITS

6 Design and Operating Notes

8 Design and Operating Notes

Das Winkelgetriebe. Made in Germany. Service. bevel gearboxes. Miniature. gearboxes. Bevel. Hygiene-design. gearboxes. gearboxes.

6 Design and Operating Notes

314 ORDINARY MAINTENANCE MANUAL FOR. PGA series VERTICAL MOUNTING POSITION. Release A02/15

FLENDER ZAPEX couplings ZWTR. Operating instructions BA 3528 EN 09/2011. FLENDER couplings

GEAR UNITS FOR INDUSTRIAL APPLICATIONS AND ROTATION

Approved Lubricants ILU 1.00GBD0110. For further information call +44 (0) , or visit

7 Design and Operating Notes

Series M. C. F. K - Geared Motors Installation & Maintenance

Approved Suppliers

6 Design and Operating Notes

Technical Information

6 Lubricants. 6 Design and Operating Notes. 6.1 Lubricants. General information

Catalog. Industrial Gear Units Planetary Gear Unit Series XP130 - XP250 Torque Range from 600 to 5200 knm * _0415*

Handbuch für installation, betrieb und wartung Planetengetriebe

Danfoss Bauer GmbH Esslingen BA GB

Routine Maintenance. Cat. No. IM

FLOTAX FC 1. TABLE OF CONTENT FLOTAX FC. Installation & Maintenance Manual ATEX UNIT SHIPPED WITHOUT OIL

Certified Quality System UNI EN ISO 9001 : 2008 SERVICE MANUAL PGRF series Release A10/14

Section 3.1. Machine Maintenance - Machine Maintenance Information. Important Preventive Maintenance Information: Maintenance Charts & Diagrams:

POWER GEAR The high performance bevel gearbox

3 Mounting Positions and Important Order Information

Installation and Maintenance. Helical and Bevel Helical Gear Units KUMERA POWER TRANSMISSION GROUP

DIN EN ISO 9001:2008 CYLINDER GEAR SUBMERGED OPERATION

POWER GEAR. The high performance bevel gearbox.

DOCUMENTATION - INSTALLATION _ MAINTENANCE

M6 General notes on mounting positions R, F, K, S, W gear units

Lubricating and Control Oils for Gas and Steam Turbines

Powershift transmissions, type EcoLife, for buses, trucks, special vehicles and stationary applications List of lubricants TE-ML 20.

Powershift transmissions, type EcoLife, for buses List of lubricants TE-ML 20. Table of contents

7.3 Drive Chain Q

TABLE OF CONTENTS. Shaft Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Hercules (Page 1 of 21)

Operating, lubrication and maintenance instructions for gearboxes and motors

TABLE OF CONTENTS. Shaft-Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Jupiter (Page 1 of 23)

Powershift transmissions, type EcoLife, for buses List of lubricants TE-ML 20. Table of contents

VIN: XXXXXXX Vehicle: 5'/F10/SEDAN/M5/S63/MANUAL/EUR/LL/2013/11

Serie 300. Installation, Operation and Maintenance Manual ATEX INCLUDED

TABLE OF CONTENTS. Falk RAM Parallel Shaft Mixer Drives Owners Manual Sizes 20 thru 22 Types HMX & HMH (Page 1 of 48)

PARAMAX. SFC Series The Cooling Tower Drives CW21

Technical Bulletin. 550 Trimmer LUBRICATION

6 Design and operating notes

Shaft Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Orion (Page 1 of 20)

EN Page 1/9 EGT-TD Lubricant approvals latest version:

KS TWINGEAR. Compact, precise and powerful.

Edition. Planetary Gear Units P..RF.., P..KF.. Series 12/2002. Operating Instructions X / EN

Examples of Applications

HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 14 / A / 103 / 0309 / E

LUBRICANT LIST FOR STERNTUBE SEALS <FOR SEAL TYPE AX, CX, DX>

OPERATING INSTRUCTIONS. E Series Worm Gearboxes OIECE

FAMILY OF PRODUCTS MEROPA GEAR OILS CHEVRON LUBRICANTS CAN HELP YOU RUN BETTER LONGER

Operating Instructions

Series H Industrial Gearbox

INVOLUTE TOOLING CORPORATION

Addendum to the Assembly and Operating Instructions

Planning Section. Environmental conditions. Different power supply. Industrial solutions

INSTRUCTIONS FOR USE FACE GEARBOXES

Addendum to the Assembly and Operating Instructions

Hydrostatic-mechanical and electric drive systems List of lubricants TE-ML 07. Table of contents

HOW TO USE THIS MANUAL

Operating Instructions

Powershift transmissions, type Ecomat (1), for buses, trucks, and special vehicles List of lubricants TE-ML 14. Table of contents

Falk RAM Mixer Drives Installation and Maintenance MDXU MDXQ

Lubricating instructions for linear guideways and ballscrews

not just a gear unit - every component manufactured with pride to exceed ISO 9000 standards by ISO 9000 certified manufacturer.

Operating instructions Gear Boxes and Geared Motors ZUVERLÄSSIG ANTREIBEND EFFIZIENT

Falk Enclosed Gear Drives Installation and Maintenance. Type A Series Sizes 305 thru 585 (Page 1 of 17) Type ABRC

MOTORIZED PULLEYS UNIT HANDLING

Well-to-Wheels: Setting the Scene

BA EN.A0= L force Geared Motors. Ä.A0=ä. Operating Instructions GST, GFL, GKS/GKL, GKR, GSS. Gearbox

Marine transmissions List of lubricants TE-ML 04. Table of contents

Marine transmissions List of lubricants TE-ML 04

KAVITSU Excellence in Gear Technology. The compact And Efficient

Motor driven diaphragm metering pump P D S V N PUMP HEAD MATERIAL. O RING V FKM B D Dutral LUBRICANT TYPE

Operating Instructions

Tractor transmissions and hydraulic lifts List of lubricants TE-ML 06. Table of contents

WORM REDUCTION GEAR UNITS INSTALLATION, OPERATION AND MAINTENANCE MANUAL

Geared motors. G-motion const. G-motion const

Marine transmissions List of lubricants TE-ML 04. Table of contents

Section 5. Maintenance. Risk of Burns. Relieving Pressure. Important when Using Cleaning Agents. Maintenance 5-1

Tractor transmissions and hydraulic lifts List of lubricants TE-ML 06. Table of contents

TA Technical Instruction. Lubricating oil for type 2, 3, 4 and 6 Jenbacher engines. GE Power


Transcription:

Approved lubricants --- Freigegebene Schmierstoffe T 7300 Table A-a Standard mineral oils for FLENDER helical, bevel-helical, planetary gear boxes and 'Marine gear Tabelle A-a Standardmineralöle für FLENDER Stirnrad-, Kegelrad-, Planetengetriebe und 'Marinegetriebe ohne Lamellenkupplung' sowie Getriebemotoren revision: 22 July 2014 Revision: 22. Juli 2014 A - a 1 (5)

Gear Oil 150 F Gear Oil 220 F Gear Oil 320 F Gear Oil 460 F Gear Oil 680 F Addinol ECO GEAR 150 M ECO GEAR 220 M ECO GEAR 320 M ECO GEAR 460 M ECO GEAR 680 M Bantleon Avilub Gear RSX-F 150 Avilub Gear RSX-F 220 Avilub Gear RSX-F 320 Avilub Gear RSX-F 460 Avilub Gear RSX-F 680 BP Energol GR-XP 150 Energol GR-XP 220 Energol GR-XP 320 Energol GR-XP 460 Energol GR-XP 680 Castrol classic Alpha SP 150 Alpha SP 220 Alpha SP 320 Alpha SP 460 Alpha SP 680 Castrol performance CEPSA Optigear BM 150 Optigear BM 220 Optigear BM 320 Optigear BM 460 ENGRANAJES XMP 150 ENGRANAJES XMP 220 AEROGEAR 320 ENGRANAJES XMP 460 ENGRANAJES XMP 320 Chevron Meropa XL 150 Meropa XL 220 Meropa XL 320 Meropa XL 460 Cogelsa ULTRAGEAR EP 150 ULTRAGEAR EP 220 ULTRAGEAR EP 320 ULTRAGEAR EP 460 ULTRAGEAR EP 680 Engen Petroleum Ltd. Gengear XEP 150 Gengear XEP 220 Gengear XEP 320 Gengear XEP 460 Gengear XEP 680 A - a 2 (5)

RENOLIN CLP 150 RENOLIN CLP 220 RENOLIN CLP 320 RENOLIN CLP 460 RENOLIN CLP 680 Fuchs RENOLIN CLP Plus 150 RENOLIN CLP Plus 220 RENOLIN CLP Plus 320 RENOLIN CLP Plus 460 RENOLIN CLP Plus 680 Fuchs Lubritech GEARMASTER CLP 150 GEARMASTER CLP 220 GEARMASTER CLP 320 GEARMASTER CLP 460 GEARMASTER CLP 680 Reductor F 150 Reductor F 220 Reductor F 320 Reductor F 460 Gulf Oil International Gulf Gear WT 220 Gulf Gear WT 320 Gulf Gear WT 460 Indian Oil Klüber LLC LLK International Servomesh Gold 150 Servomesh Gold 220 Servomesh Gold 320 Servomesh Gold 460 Klüberoil GEM 1-150 N Klüberoil GEM 1-220 N Klüberoil GEM 1-320 N Klüberoil GEM 1-460 N Klüberoil GEM 1-680 N Klüberoil GEM 1-1000 N LUKOIL STEELO 150 LUKOIL STEELO 220 LUKOIL STEELO 320 LUKOIL STEELO 460 LOTOS OIL XSP 150 XSP 220 XSP 320 XSP 460 XSP 680 XSP 1000 Mobil Mobilgear 600 XP 100 Mobilgear 600 XP 150 Mobilgear 600 XP 220 Mobilgear 600 XP 320 Mobilgear 600 XP 460 Mobilgear 600 XP 680 A - a 3 (5)

MOL-LUB Ltd. MOL Ultrans EP 150 MOL Ultrans EP 220 MOL Ultrans EP 320 MOL Ultrans EP 460 MOTOREX 100 150 220 320 460 680 OMV Petrol Ofisi Gravis MP 150 Gravis MP 220 Gravis MP 320 Gravis MP 460 Gravis MP 680 OMV R & M OMV gear HAST 150 OMV gear HAST 220 OMV gear HAST 320 OMV gear HAST 460 OMV gear HAST 680 OMV gear HAST 1000 Pertamina MASRI SUPER FLG 150 MASRI SUPER FLG 220 MASRI SUPER FLG 320 MASRI SUPER FLG 460 PETROGAL 150 220 320 460 A - a 4 (5)

Q8-Kuweit Petroleum Q8 Goya NT 150 Q8 Goya NT 220 Q8 Goya NT 320 Q8 Goya NT 460 Setral TOTAL MI-setral-GEAR 150 MI-setral-GEAR 220 MI-setral-GEAR 320 MI-setral-GEAR 460 MI-setral-GEAR 680 CARTER EP 220 CARTER EP 320 CARTER EP 460 CARTER EP 680 CARTER XEP 150 CARTER EP 1000 CARTER XEP 220 CARTER XEP 320 CARTER XEP 460 CARTER XEP 680 Verkol COMPOUND MP 150 COMPOUND MP 220 COMPOUND MP 320 COMPOUND MP 460 COMPOUND MP 680 A - a 5 (5)