Cbfab.com. roller shades double roller shades

Cbfab.com roller shades double roller shades retail price list october 31, 2014

Table of Contents Roller Shades Roller Shade Specifications 1 Roller Shade Index 2-3 Roller Shade Chart I 4 Roller Shade Chart II 5 Roller shade Chart III 6 Roller Shade Chart IV 7 Roller Shade Chart V 8 Roller Shade Chart VI 9 Roller Shade Chart VII 10 Roller Shade Chart VIII 11 Screen Essentials Chart IX 12 Screen Essentials Chart X 13 Screen Essentials Chart XI 14 Roller Shade Options & Surcharges Coulisse Absolute Roller System 15 Headrail Options Treatment Options Hembar Options 16-18 Top 19-22 Bottom 23 Roller Shade Installation Instructions 24 Double Roller Shades Double Roller Shade Specifications 25 Double Roller Shade Index 26 Double Roller Shade Chart XII 27 Double Roller Shade Chart XIII 28 Double Roller shade Chart XIV 29 Warranty 30

R O L L E R S H A D E S Headrail systems: Roller Shades are fabricated with the Rollease Skyline clutch system which is included in the chart pricing Shades can be set at any position and easily controlled manually Roller shades are fabricated with a silver #10 metal bead chain loop Other colors and plastic chains are available but must be requested Headrail Options include: (surcharges apply) Rollease Spring-Assist system, Galaxy clutch systems and Pin-end assist system reduce the pull force needed to raise heavy manual shades In most cases these clutch systems are a cost effective alternative to motorization and recommended for shades up to 144 wide shades or shades that exceed 24 pounds Lite Touch clutch-free cordless lift system eliminates lifting cords using a spring mechanism The Outdoor-use clutch system and cable-guided outdoor system are designed and warranted for exterior shade applications Fabric: Pay close attention to the maximum width of the fabric when dealing with wide windows Many of the fabrics are available in wide width fabrics Please refer to the fabric section of this guide for the maximum width of the fabrics Railroading: Depending on the weave/mesh and fabric content, many of the fabrics can be railroaded (turned width for length) but may have a visible seam (placed at the top of the shade) when the shade is fully extended If the width of the window exceeds the width of the fabric you must consider that the shade may have a visible seam Fabrics that are railroaded may curl along the edge This is not a defect in the product NOTE: If railroading shades, we recommend that you specify when placing your purchase order that all shades located in the same area be railroaded and cut from the same roll of fabric for the best possible match Fabric Roll: Roller Shades are fabricated with the fabric lowering from the back of the shade Optional reverse roll (fabric lowers from the front side of the shade) can be requested at no additional charge Top Treatments: Many options (surcharges apply) are available to hide the roller tube including cassettes (with or without fabric inserts), fascia, fabric wrapped cornice and IB shade valance Optional side/bottom channels are available Bottom Hembar: Standard roller shades include a heat sealed bottom hembar with open ends Sealed ends may be requested at no additional charge An external aluminum hembar can also be requested (additional charge) Light gap chart illustrates the light filtration combined from the control and idle ends of the shade. The allowance is a total deduction taken from the fabric This is an approximate calculation and may vary slightly depending on size and installation of shade LIGHT GAP GUIDELINES SL10 Rollease Clutch System (1½ tube) 1⅛ Fabric Wrapped Cornice 0 SL15 Rollease Clutch System (1½ tube) 1¼ Fascia (square/rounded) 1¼ SL20 Rollease Clutch System (2 tube) 1½ Classic IB Valance ⅛ Rollease Spring Assist System 1¼ Absolute Roller Shade System 1½ Rollease Galaxy Clutch System 1½ Double Roller Cassette 1½ Rollease Pin-end Assist System 1¼ Optional Double Roller Aluminum Headrail 1½ Cassettes 1¼ Ultimate Double Roller System 2 Lite Touch Clutch-Free Cordless Roller Shades 1¼ 1

R O L L E R S H A D E S FABRIC Essentials Collection: *Shade Heights Limited Fabric Specifications: PRICE PAGE CHART # Coulisse Berlin Transparent I 4 Coulisse Berlin Blackout IV 7 Coulisse Fernando Blackout II 5 Coulisse RF Linen 5100* VII 10 Coulisse Muenchen Transparent II 5 Coulisse Muenchen Blackout III 6 Coulisse Natal Transparent II 5 Coulisse Natal Blackout IV 7 Coulisse Paris VII 10 Coulisse PR 79884-01* IV 7 Coulisse PR 79884-51* VII 10 Coulisse PR 79886-52* VII 10 Coulisse PRB 99685-01* III 6 Coulisse PRF 90087-51* III 6 Coulisse SA 69754* VI 9 Coulisse SA 69764 VI 9 Coulisse SA 69765* VII 10 Coulisse SA 89973* VII 10 Coulisse SAF 90055-02* VII 10 Coulisse SAF 90055-51* VIII 11 Coulisse SAF 90056-51* VIII 11 Coulisse SAF 90057-04* VII 10 Coulisse SAF 90057-55* VIII 11 Coulisse SAF 90069-03* VII 10 Coulisse SAF 90069-54* VIII 11 Coulisse Salvador Transparent VI 9 Coulisse SCP7-MET VI 9 Coulisse SCP5-MET VI 9 Coulisse Coulisse Coulisse Screen Essentials 3005, 3010, 4005, 4010 Screen Essentials 1003, 3003, 3001 Screen Essentials 4001, 4003, 5001 IX 12 X 13 XI 14 Coulisse TRF 90056-01* VI 9 Coulisse TRF 90087-04* VI 9 For additional fabric specifications - visit www.coulisse.com Please refer to the Coulisse sample book for color selection Please refer to the price charts and options section to calculate the cost of the shade PRICE PAGE FABRIC CHART # Ultimate Collection: Coulisse Eco 30 VI 9 Coulisse Eco 50 V 8 Coulisse Esvedra I 4 Coulisse Explosion VI 9 Coulisse Fishbone VI 9 Coulisse JA 21001 VIII 11 Coulisse JA 21002 VIII 11 Coulisse JA 21003 VIII 11 Coulisse JA 21004 VIII 11 Coulisse JA L 81819-03 VIII 11 Coulisse Lyon VI 9 Coulisse Pearlchain V 8 Coulisse SCA-5-Linen VIII 11 Coulisse SCA-JA-ULT VIII 11 Coulisse Scala VII 10 PRICE PAGE FABRIC CHART # Ultimate Jacquard Collection I & II: Coulisse RF-JA 81821 VIII 11 Coulisse RF-JA 81823 VIII 11 Coulisse RF-JA 81819 VIII 11 Coulisse RF-JA 81818 VIII 11 Coulisse RF-JA 81822 VIII 11 Coulisse RF-JA 81826 VIII 11 Coulisse RF-JA 81816 VIII 11 Coulisse RF-JA 81817 VIII 11 Coulisse RF-JA 81825, 81824 VIII 11 Coulisse Explosion VI 9 Coulisse Fishbone VI 9 Coulisse Flower VIII 11 Coulisse Ornament VI 9 Coulisse Pearlchain V 8 Coulisse Scale VII 10 PRICE PAGE FABRIC CHART # Ultimate Screen Fabrics: Coulisse SCP-CO-ULT VIII 11 Coulisse SCP-JA-ULT VIII 11 Coulisse SCA-5-LINEN VIII 11 Coulisse SCA-JA-ULT VIII 11 2

R O L L E R S H A D E S FABRIC Nature Collection: Coulisse Bali 78 VI 9 Coulisse Beijing 71 IV 7 Coulisse Gunsangspngl 78 VI 9 Coulisse Gunsang 78 V 8 Coulisse Hainan 71 III 6 Coulisse Hanoi 71 II 5 Coulisse Hongkong 71 IV 7 Coulisse Java 78 VI 9 Coulisse Jinju 78 VI 9 Coulisse Kowloon 71 III 6 Coulisse Kyoto 78 IV 7 Coulisse Linen 78 IV 7 Coulisse Lin 1, 2, 3 71 II 5 Coulisse Macau 71 V 8 Coulisse Masan 78 VIII 11 Coulisse Nara 78 VII 10 Coulisse Osaka 72 V 8 Coulisse Pap 1 71 III 6 Coulisse Pap 2,3,4,5,6,7 94 III 6 Coulisse Pohang 78 IV 7 Coulisse Puket 71 IV 7 Coulisse Saigon 94 VII 10 Coulisse Sapporo 78 V 8 Coulisse Seoul 78 V 8 Coulisse Shanghai 71 III 6 Coulisse Suzuka 78 IV 7 Coulisse Tokio 78 VII 10 Specifications: FABRIC WIDTH PRICE CHART PAGE # The Nature Collection is sold separately. Style names for the Nature Collection are NOT listed on the pricing grids. Please refer to the standard price charts listed in the index above for pricing. Please refer to the Coulisse sample book for color selection Please refer to the price charts and options section to calculate the cost of the shade Nature Collection fabics can NOT be railroaded or seamed Valance options are limited to Classic IB Valance or Fabric Inserted Cassette due to the nature of the construction of the fabrics Natural materials such as paper, jute and cotton are the base materials for this collection Small irregularities as well as possible slight fraying at the edges may occur and are considered *normal characterics Natural materials may crack split, twist, bow and flare. Natural materials may experience color changes over time due to aging, direct sunlight and other climatic conditions. Climatic conditions may cause the shade length to stretch or shrink *Normal characteristics are not considered defects in the product or workmanship 3

HEIGHT - IN INCHES R O L L E R S H A D E S Product Specifications: Roller shades wider than the standard fabric width (refer to the index page for details) will be railroaded (turned width for length) When a shade is railroaded (turned width for length), we recommend shades in the same area are made with the same style and cut width for length for the best possible match Fabrics railroaded (turned width for length) may have a visible seam when fabricated longer than the maximum standard width Shades will have a maximum of one (1) horizontal seam for any length Please specify if shades are located in the same room to ensure that the shades are cut from the same roll of fabric if possible We recommend that roller shades over 144 wide should be motorized due to the weight of the shade Berlin Transparent, Esvedra CHART I WIDTH - IN INCHES (TIP TO TIP) UP TO 30 37 46 55 64 73 78 84 96 109 121 132 144 156 168 36 48 60 72 84 96 108 120 EACH ADD L 12 75 91 119 145 165 181 251 263 274 355 379 446 469 490 520 81 99 124 155 183 195 273 293 313 388 409 484 514 520 559 86 105 134 163 191 206 289 311 335 420 484 505 535 559 595 93 113 146 173 203 223 309 351 394 469 595 636 699 754 825 96 118 154 188 219 235 334 375 419 569 669 775 783 864 919 99 120 161 193 231 265 354 396 441 638 769 813 838 919 969 109 133 176 214 269 325 401 459 500 710 788 850 900 956 1,019 118 144 193 250 305 359 468 503 565 756 831 906 950 1,019 1,081 10 13 18 20 24 28 30 35 43 48 51 54 56 59 61 Esvedra standard width is 78 ; must be railroaded over 78 in width Berlin Transparent colors 0200, 0400, 0150, 0311, 0610, 0810, 0821, 0847, 0849, 0910, 0919, 0920, 0927, 0928, 0929, 0934, 0941, 0960 standard width is 79 ; must be railroaded over 79 in width All other colors have a standard width of 98 ; must be railroaded over 98 in width FABRIC WILL BE RAILROADED 2 ROLLER TUBE 2½ ROLLER TUBE 4

HEIGHT - IN INCHES R O L L E R S H A D E S Product Specifications: Roller shades wider than the standard fabric width (refer to the index page for details) will be railroaded (turned width for length) When a shade is railroaded (turned width for length), we recommend shades in the same area are made with the same style and cut width for length for the best possible match Fabrics railroaded (turned width for length) may have a visible seam when fabricated longer than the maximum standard width Shades will have a maximum of one (1) horizontal seam for any length Please specify if shades are located in the same room to ensure that the shades are cut from the same roll of fabric if possible We recommend that roller shades over 144 wide should be motorized due to the weight of the shade Muenchen Transparent, Natal Transparent, Fernando Blackout CHART II WIDTH - IN INCHES (TIP TO TIP) UP TO 36 48 60 72 84 96 108 120 EACH ADD L 12 30 37 46 55 64 73 78 84 96 109 121 132 144 156 168 83 100 124 138 159 169 195 224 286 348 455 550 659 788 906 93 113 133 150 176 194 213 250 309 391 486 595 715 866 1,018 100 123 141 166 193 211 230 260 325 408 518 646 788 953 1,116 108 131 150 183 213 230 255 299 348 430 558 716 899 1,050 1,208 126 154 171 199 229 256 289 319 384 470 606 766 1,050 1,208 1,379 140 171 189 218 250 285 319 353 426 503 656 834 1,181 1,313 1,470 184 224 241 276 311 345 389 420 493 551 711 940 1,313 1,446 1,575 200 244 265 295 333 381 434 466 545 624 788 1,079 1,444 1,608 1,720 19 23 25 28 31 35 41 48 54 63 71 90 124 139 158 Muenchen Transparent colors 0150, 0401, 1300, 1401, 1700, 1900, 2203, 2502, 2700, 2803, 3301,4101, 4102, 4300,4301 standard width is 79 ; must be railroaded over 79 in width All other colors have a standard width of 110 ; must be railroaded over 110 in width Natal Transparent standard width is 98 ; must be railroaded over 98 in width Fernando Blackout standard width is 110 ; must be railroaded over 110 in width FABRIC WILL BE RAILROADED 2 ROLLER TUBE 2½ ROLLER TUBE 5

HEIGHT - IN INCHES R O L L E R S H A D E S Product Specifications: Roller shades wider than the standard fabric width (refer to the index page for details) will be railroaded (turned width for length) When a shade is railroaded (turned width for length), we recommend shades in the same area are made with the same style and cut width for length for the best possible match Fabrics railroaded (turned width for length) may have a visible seam when fabricated longer than the maximum standard width Shades will have a maximum of one (1) horizontal seam for any length Please specify if shades are located in the same room to ensure that the shades are cut from the same roll of fabric if possible We recommend that roller shades over 144 wide should be motorized due to the weight of the shade Muenchen Blackout, PRB 99685-01, PRF 90087-51 CHART III WIDTH - IN INCHES (TIP TO TIP) UP TO 30 37 46 55 64 73 78 84 96 109 121 132 144 156 168 36 48 60 72 84 96 108 120 EACH ADD L 12 113 138 173 189 223 231 274 308 356 484 629 761 811 936 1,078 125 153 181 208 243 263 293 338 384 531 661 829 904 1,030 1,203 139 169 194 226 263 288 313 363 404 549 703 873 961 1,153 1,346 149 181 213 251 296 321 359 413 440 596 774 995 1,123 1,346 1,503 175 214 238 274 321 355 399 440 484 649 836 1,060 1,181 1,446 1,646 193 235 260 299 343 393 440 489 529 694 898 1,148 1,406 1,546 1,709 236 288 313 363 413 451 524 574 674 749 961 1,243 1,541 1,775 1,975 268 326 356 413 454 524 586 649 749 836 1,038 1,385 1,696 1,945 2,170 28 34 39 45 49 51 56 65 69 76 81 126 156 170 188 PRB 99685-01 & PRF 90087-51 standard width is 77 ; and can NOT be railroaded Muenchen Blackout color 6250 standard width is 79 ; must be railroaded over 79 in width All other colors have a standard width of 110 ; must be railroaded over 110 in width FABRIC WILL BE RAILROADED 2 ROLLER TUBE 2½ ROLLER TUBE 6

HEIGHT - IN INCHES R O L L E R S H A D E S Product Specifications: Roller shades wider than the standard fabric width (refer to the index page for details) will be railroaded (turned width for length) When a shade is railroaded (turned width for length), we recommend shades in the same area are made with the same style and cut width for length for the best possible match Fabrics railroaded (turned width for length) may have a visible seam when fabricated longer than the maximum standard width Shades will have a maximum of one (1) horizontal seam for any length Please specify if shades are located in the same room to ensure that the shades are cut from the same roll of fabric if possible We recommend that roller shades over 144 wide should be motorized due to the weight of the shade Berlin Blackout, Natal blackout, PR 79884-01 CHART IV WIDTH - IN INCHES (TIP TO TIP) UP TO 30 37 46 55 64 73 78 84 96 109 121 132 144 156 168 36 48 60 72 84 96 108 120 EACH ADD L 12 119 145 181 199 234 244 288 324 375 509 661 801 854 985 1,134 131 160 191 219 255 276 308 355 404 559 696 873 951 1,084 1,266 145 178 204 239 276 303 329 381 425 578 740 919 1,011 1,213 1,418 156 191 224 265 311 338 378 434 463 628 815 1,048 1,181 1,418 1,581 185 225 250 288 338 374 420 463 509 683 880 1,116 1,244 1,523 1,733 203 248 274 315 360 413 463 515 556 730 945 1,208 1,480 1,628 1,799 248 303 329 381 434 475 551 604 709 788 1,011 1,308 1,623 1,869 2,079 283 344 375 434 478 551 618 683 788 880 1,093 1,458 1,785 2,048 2,284 29 35 41 48 51 54 59 69 73 80 85 133 165 179 198 PR 79884-01 standard width is 77 ; and can NOT be railroaded Berlin Blackout colors 5150, 5200, 5400, standard width is 79 ; must be railroaded over 79 in width All other colors have a standard width of 98 ; must be railroaded over 98 in width Natal Blackout standard width is 98 ; must be railroaded over 98 in width FABRIC WILL BE RAILROADED 2 ROLLER TUBE 2½ ROLLER TUBE 7

HEIGHT - IN INCHES R O L L E R S H A D E S Product Specifications: Roller shades wider than the standard fabric width (refer to the index page for details) will be railroaded (turned width for length) When a shade is railroaded (turned width for length), we recommend shades in the same area are made with the same style and cut width for length for the best possible match Fabrics railroaded (turned width for length) may have a visible seam when fabricated longer than the maximum standard width Shades will have a maximum of one (1) horizontal seam for any length Please specify if shades are located in the same room to ensure that the shades are cut from the same roll of fabric if possible We recommend that roller shades over 144 wide should be motorized due to the weight of the shade Eco 50, Pearlchain CHART V WIDTH - IN INCHES (TIP TO TIP) UP TO 30 37 46 55 64 73 78 84 96 109 121 132 144 156 168 36 138 168 210 230 270 283 350 375 455 588 763 933 1,025 1,163 1,330 A 48 151 185 223 255 295 325 406 444 481 650 798 1,000 1,125 1,300 1,500 60 166 203 236 278 313 345 440 481 525 673 830 1,063 1,205 1,438 1,675 72 191 233 260 308 363 388 475 503 563 731 933 1,200 1,400 1,675 1,868 84 214 260 288 335 388 430 543 584 625 795 1,025 1,295 1,500 1,825 2,050 96 236 288 320 368 419 480 575 600 675 848 1,088 1,388 1,720 1,975 2,125 108 288 350 383 438 500 548 670 688 788 905 1,175 1,500 1,913 2,225 2,488 120 326 398 435 500 558 623 763 800 875 1,000 1,250 1,688 2,100 2,450 2,700 EACH DD L 12 35 43 48 53 60 64 74 84 93 100 106 155 195 218 235 Eco 50 standard width is 83 ; must be railroaded over 83 in width Pearlchain standard width is 95 ; and can NOT be railroaded FABRIC WILL BE RAILROADED 2 ROLLER TUBE 2½ ROLLER TUBE 8

HEIGHT - IN INCHES R O L L E R S H A D E S Product Specifications: Roller shades wider than the standard fabric width (refer to the index page for details) will be railroaded (turned width for length) When a shade is railroaded (turned width for length), we recommend shades in the same area are made with the same style and cut width for length for the best possible match Fabrics railroaded (turned width for length) may have a visible seam when fabricated longer than the maximum standard width Shades will have a maximum of one (1) horizontal seam for any length Please specify if shades are located in the same room to ensure that the shades are cut from the same roll of fabric if possible We recommend that roller shades over 144 wide should be motorized due to the weight of the shade Eco 30, Explosion, Fishbone, Lyon, Ornament, SA 69754, SA 69764, TRF 90056-01, Salvador Transparent, SCP7-MET, SCP5-MET, TRF 90087-04 CHART VI WIDTH - IN INCHES (TIP TO TIP) UP TO 30 37 46 55 64 73 78 84 96 109 121 132 144 156 168 36 146 179 225 246 289 303 375 401 486 629 816 998 1,096 1,244 1,423 A 48 163 198 238 273 316 348 435 475 515 695 854 1,070 1,204 1,391 1,605 60 178 216 253 298 335 369 471 515 561 720 888 1,138 1,289 1,539 1,793 72 204 249 279 329 388 415 509 538 603 783 998 1,284 1,498 1,793 1,999 84 229 279 308 359 415 460 580 625 669 851 1,096 1,386 1,605 1,953 2,194 96 253 308 343 394 448 514 615 643 723 906 1,164 1,485 1,840 2,114 2,274 108 308 375 409 469 535 586 718 736 843 969 1,258 1,605 2,046 2,381 2,661 120 349 425 465 535 596 666 816 856 936 1,070 1,338 1,806 2,248 2,621 2,889 EACH DD L 12 38 45 51 56 64 69 79 90 99 108 114 166 209 233 251 SA 69754, SA 69764, TRF 90056-01 and TRF 90087-04 standard width is 79 ; and can NOT be railroaded Eco 30 standard width is 83 ; must be railroaded over 83 in width Salvador Transparent standard width is 94 ; must be railroaded over 94 in width Explosion & Fishbone standard width is 95 ; and can NOT be railroaded Lyon & Ornament standard width is 95 ; must be railroaded over 95 in width SCP7-MET & SCP5-MET standard width is 98 ; must be railroaded over 98 in width FABRIC WILL BE RAILROADED 2 ROLLER TUBE 2½ ROLLER TUBE 9

HEIGHT - IN INCHES R O L L E R S H A D E S Product Specifications: Roller shades wider than the standard fabric width (refer to the index page for details) will be railroaded (turned width for length) When a shade is railroaded (turned width for length), we recommend shades in the same area are made with the same style and cut width for length for the best possible match Fabrics railroaded (turned width for length) may have a visible seam when fabricated longer than the maximum standard width Shades will have a maximum of one (1) horizontal seam for any length Please specify if shades are located in the same room to ensure that the shades are cut from the same roll of fabric if possible We recommend that roller shades over 144 wide should be motorized due to the weight of the shade Paris, SA 69765, SA 89973, SAF 90055-02, SAF 90057-04, SAF 90069-03, Scale, Scala, PR 79884-51, PR 79886-52, RF-LINEN-5100 CHART VII WIDTH - IN INCHES (TIP TO TIP) UP TO 30 37 46 55 64 73 78 84 96 109 121 132 144 156 168 36 48 60 72 84 96 108 120 EACH ADD L 12 158 193 244 268 315 331 410 439 530 690 893 1,095 1,203 1,339 1,536 173 210 260 296 344 381 473 519 565 761 933 1,169 1,313 1,496 1,733 194 236 276 325 368 404 515 565 611 788 971 1,248 1,413 1,654 1,930 224 273 303 360 423 454 556 591 656 859 1,095 1,405 1,641 1,930 2,153 250 305 336 394 454 504 635 685 735 933 1,203 1,510 1,759 2,100 2,363 276 336 373 430 491 565 675 704 788 995 1,274 1,628 2,009 2,271 2,441 334 408 446 513 585 640 785 806 919 1,058 1,379 1,759 2,231 2,560 2,861 381 465 509 585 654 730 893 935 1,024 1,169 1,468 1,969 2,455 2,823 3,098 40 49 54 60 69 75 84 95 105 114 125 178 215 246 263 PR 79884-51 & PR 79886-52 standard width is 77 ; and can NOT be railroaded SA 69765, SA 89973, SAF 90055-02, SAF 90057-04, SAF 90069-03 and RF-LINEN-5100 standard width is 79 ; and can NOT be railroaded Paris standard width is 95 ; must be railroaded over 95 in width Scale, Scala, standard width is 95 ; and can NOT be railroaded FABRIC WILL BE RAILROADED 2 ROLLER TUBE 2½ ROLLER TUBE 10

HEIGHT - IN INCHES R O L L E R S H A D E S Product Specifications: Roller shades wider than the standard fabric width (refer to the index page for details) will be railroaded (turned width for length) When a shade is railroaded (turned width for length), we recommend shades in the same area are made with the same style and cut width for length for the best possible match Fabrics railroaded (turned width for length) may have a visible seam when fabricated longer than the maximum standard width Shades will have a maximum of one (1) horizontal seam for any length Please specify if shades are located in the same room to ensure that the shades are cut from the same roll of fabric if possible We recommend that roller shades over 144 wide should be motorized due to the weight of the shade Flower, JA 21001, JA 21002, JA 21003, JA 21004, JA L 81819-03, SAF 90055-51, SAF 90056-51, SAF 90057-55, SAF 90069-54, JA 81821, JA 81823, JA 81818, JA 81822, JA 81826, JA 81816, JA 81817, JA 81825, JA 81824, JA 81819, SCP-CO-ULT, SCP-JA-ULT, SCA-5-LINEN, SCA-JA-ULT CHART VIII WIDTH - IN INCHES (TIP TO TIP) UP TO 30 37 46 55 64 73 78 84 96 109 121 132 144 156 168 36 169 206 329 336 399 405 414 560 661 743 866 1,083 1,185 1,338 1,541 48 194 236 386 398 456 463 478 601 703 793 943 1,159 1,338 1,503 1,719 60 224 273 443 453 515 523 541 628 743 876 968 1,235 1,426 1,655 1,910 72 246 300 501 513 580 584 599 784 844 979 1,083 1,400 1,655 1,923 2,114 84 270 329 559 575 634 639 663 810 945 1,079 1,178 1,528 1,758 2,101 2,343 96 328 399 670 685 698 703 726 840 1,013 1,181 1,274 1,630 2,025 2,254 2,419 108 353 430 733 744 759 763 789 979 1,148 1,280 1,350 1,731 2,229 2,560 2,826 120 EACH ADD L 12 390 475 803 810 824 834 879 1,066 1,249 1,396 1,528 1,974 2,445 2,801 3,055 41 50 54 61 69 76 91 96 106 119 125 179 218 243 249 SAF 90055-51, SAF 90056-51, SAF 90057-55 & SAF 90069-54 standard width is 79 ; and can NOT be railroaded Flower, JA L 81819-03, JA 81821, JA 81823, JA 81818, JA 81822, JA 81826, JA 81816, JA 81817, JA 81825, JA 81824, JA 81819, standard width is 95 ; and can NOT be railroaded SCP-CO-ULT, SCP-JA-ULT, SCA-5-LINEN, SCA-JA-ULT standard width is 98 ; and can NOT be railroaded JA 21001, JA 21002, JA 21003, & JA 21004 standard width is 110 ; and can NOT be railroaded FABRIC WILL BE RAILROADED FABRIC WILL BE RAILROADED 2 ROLLER TUBE 2½ ROLLER TUBE 2 ROLLER TUBE 2½ ROLLER TUBE 11

HEIGHT - IN INCHES R O L L E R S H A D E S Product Features & Benefits: All fabrics have over 16 certifications! Eco-Friendly, NFPA701 rated and excellent for commercial applications All screens are made of PVC & Polyester 1000 and 3000 series: interior use only 4000 and 5000 series: interior and exterior use approved Fabrics vary in openness factors-from 1% to 10%- please refer to sample book for details and specifications All fabrics stocked in 98 widths and styles 3003 and 3005 stocked in 118 widths! Product Specifications: Roller shades wider than the standard fabric width will be railroaded (turned width for length) When a shade is railroaded (turned width for length), we recommend shades in the same area are made with the same style and cut width for length for the best possible match Fabrics railroaded (turned width for length) may have a visible seam when fabricated longer than the maximum standard width Shades will have a maximum of one (1) horizontal seam for any length Please specify if shades are located in the same room to ensure that the shades are cut from the same roll of fabric if possible We recommend that roller shades over 144 wide should be motorized due to the weight of the shade Please refer to Coulisse Shade Retail Price List for options & surcharges Coulisse Screen Essentials # 3005, 3010, 4005, 4010 CHART IX WIDTH - IN INCHES (TIP TO TIP) UP TO 30 37 46 55 64 73 78 84 96 109 121 132 144 36 48 60 72 84 96 108 96 115 142 157 184 192 228 258 295 381 425 545 595 106 124 151 172 202 218 242 279 320 416 460 575 670 117 139 161 187 217 237 260 298 335 448 498 615 735 126 150 176 210 245 268 295 330 360 491 562 695 830 149 175 198 226 265 296 325 360 396 530 600 745 870 162 195 218 250 285 325 360 400 428 556 648 800 925 198 239 258 294 334 375 415 455 510 605 682 862 995 120 EACH ADD L 12 226 270 293 330 376 432 470 510 575 688 745 985 1,095 25 29 33 40 45 48 51 55 60 67 74 90 102 3005 available in 98 and 118 widths 3010, 4005, 4010 available in 98 width All colors/fabrics that have a standard width of 98 ; must be railroaded over 98 in width All colors/fabrics that come in 118 width; must be railroaded over 118 in width FABRIC WILL BE RAILROADED 2 ROLLER TUBE 2½ ROLLER TUBE 12

HEIGHT - IN INCHES R O L L E R S H A D E S Product Specifications: Roller shades wider than the standard fabric width will be railroaded (turned width for length) When a shade is railroaded (turned width for length), we recommend shades in the same area are made with the same style and cut width for length for the best possible match Fabrics railroaded (turned width for length) may have a visible seam when fabricated longer than the maximum standard width Shades will have a maximum of one (1) horizontal seam for any length Please specify if shades are located in the same room to ensure that the shades are cut from the same roll of fabric if possible We recommend that roller shades over 144 wide should be motorized due to the weight of the shade Please refer to Coulisse Shade Retail Price List for options & surcharges Coulisse Screen Essentials # 1003, 3003, 3001 EACH ADD L 12 CHART X WIDTH - IN INCHES (TIP TO TIP) UP TO 30 37 46 55 64 73 78 84 96 109 121 132 144 36 48 60 72 84 96 108 120 108 129 159 176 206 215 255 289 330 427 476 610 666 119 139 169 193 226 244 271 312 358 466 515 644 750 131 156 180 209 243 265 291 334 375 502 558 689 823 141 168 197 235 274 300 330 370 403 550 629 778 930 167 196 222 253 297 332 364 403 444 594 672 834 974 181 218 244 280 319 364 403 448 479 623 726 896 1,036 222 268 289 329 374 420 465 510 571 678 764 965 1,114 253 302 328 370 421 484 526 571 644 771 834 1,103 1,226 28 32 37 45 50 54 57 62 67 75 83 101 114 1003 and 3001 available in 98 width 3003 available in 98 and 118 widths All colors/fabrics that have a standard width of 98 ; must be railroaded over 98 in width All colors/fabrics that come in 118 widths; must be railroaded over 118 in width FABRIC WILL BE RAILROADED 2 ROLLER TUBE 2½ ROLLER TUBE 13

HEIGHT - IN INCHES R O L L E R S H A D E S Product Specifications: Roller shades wider than the standard fabric width will be railroaded (turned width for length) When a shade is railroaded (turned width for length), we recommend shades in the same area are made with the same style and cut width for length for the best possible match Fabrics railroaded (turned width for length) may have a visible seam when fabricated longer than the maximum standard width Shades will have a maximum of one (1) horizontal seam for any length Please specify if shades are located in the same room to ensure that the shades are cut from the same roll of fabric if possible We recommend that roller shades over 144 wide should be motorized due to the weight of the shade Please refer to Coulisse Shade Retail Price List for options & surcharges Coulisse Screen Essentials # 4001, 4003, 5001 EACH ADD L 12 CHART XI WIDTH - IN INCHES (TIP TO TIP) UP TO 30 37 46 55 64 73 78 84 96 109 121 132 144 36 48 60 72 84 96 108 120 110 132 163 181 212 221 262 297 339 438 489 627 684 122 143 174 198 232 251 278 321 368 478 529 661 771 135 160 185 215 250 273 299 343 385 515 573 707 845 145 173 202 242 282 308 339 380 414 565 646 799 955 171 201 228 260 305 340 374 414 455 610 690 857 1,001 186 224 251 288 328 374 414 460 492 639 745 920 1,064 228 275 297 338 384 431 477 523 587 696 784 991 1,144 260 311 337 380 432 497 541 587 661 791 857 1,133 1,259 29 33 38 46 52 55 59 63 69 77 85 103 117 4001, 4003, 5001 standard fabric width is 98 ; must be railroaded over 98 in width FABRIC WILL BE RAILROADED 2 ROLLER TUBE 2½ ROLLER TUBE 14

R O L L E R S H A D E S Options & Surcharges H E A D R A I L S Y S T E M S ABSOLUTE ROLLER SHADE SYSTEM This head rail system is available in decorative metallic finishes for a contemporary look. This system can be ceiling or wall mounted For roller shades up to 96 : Coulisse Absolute Roller System Metallic colors: available in white, gray, satin, old brass and mill finish 42mm pair of brackets & clutch will accommodate shades up to 96 wide Combination: Coulisse Bracket RCU-01 Coulisse Clutch RCU-16 $66 each Coulisse Absolute Rounded Fascia Colors: available in white and anodized 42mm Small (must be fabricated with 42mm clutch RCU-16/brackets RCU-01) RCU-11 $27 per foot For roller shades over 96 : Coulisse Absolute Roller System Metallic colors: available in white, gray, satin, old brass and mill finish 80mm pair of brackets & clutch will accommodate shades over 96 wide Combination: Coulisse Bracket RCU-03 Coulisse Clutch RCU-16 $116 each Coulisse Absolute Rounded Fascia Colors: available in white and anodized 80mm Large (must be fabricated with 80mm clutch RCU-16/brackets RCU-03) RCU-12 $32 per foot Prices Effective March 1, 2015 15

R O L L E R S H A D E S Options & Surcharges H E A D R A I L S Y S T E M S LITE TOUCH CLUTCH FREE CORDLESS LIFT SYSTEM Min width: 35 Max width: 96 Max length: 96 UP TO 48 UP TO 72 UP TO 96 The new Lite Touch clutch free cordless lift system features a streamlined design eliminating lift cords This system uses a spring mechanism to replace the operating cords $65 each $115 each $160 each Standard 10 tassel cord; optional longer cords are available upon request for no additional charge Valance options available: Classic Fabric Wrapped Cornice (Not available in Nature Collection) or the IB Shade Valance. **Can NOT be used with fascia or cassettes. DUAL SHADE BRACKET Max width: 120 Max length: 120 The Skyline Dual Shade Bracket allows you to secure two separate roller shades together on a single bracket There are two styles of brackets: Please specify if the shades will be a vertical or horizontal mount to ensure the correct brackets are shipped with your order VERTICAL MOUNT: Shades are stacked one on top of the other We recommend that the upper shade be reverse roll and the lower shade standard roll Bracket dimensions 5 67 height by 2 depth HORIZONTAL MOUNT: Shades can be mounted in any combination Bracket dimensions 3 55 height by 6 97 depth Not all options of valance and clutch systems are available; please contact customer service $30 per pair PIN-END ASSIST SYSTEM $37 The Pin-End Spring Assist is a device for roller shades which reduces the pull forces required to raise a shade When a shade is lowered, gravity is used to coil a spring attached to the pin-end side of the shade When the shade is raised the coiled spring assists the operator by reducing the pull force required by upwards of 40% When used with a RollEase clutch the operator experiences the smoothest and lowest pull force available on any manually operated shade Max width 1¼ tube: 96 Max drop 1¼ tube: 88 Max weight 1¼ tube: 8 lbs. Reduces pull force approx 40% Max width 1½ tube: 96 Max drop 1½ tube: 88 Max weight 1½ tube: 16 lbs. Reduces pull force approx 30% Prices Effective March 1, 2015 16

R O L L E R S H A D E S Options & Surcharges H E A D R A I L S Y S T E M S SPRING ASSIST SYSTEM - EACH $280 Min width: 70 Max width: 132 Max length: 178 The Spring Assist combines RollEase clutch technology with a new spring which when pre-rotated to the designated tension, reduces the pull force necessary to raise and lower heavy shades weighing up to 30 lbs to an average of just 6 lbs (on a fully assembled shade) The spring assist is simply inserted into the roller shade tube and the shade is ready for installation No further adjustments are needed for the lifetime of the shade Motorization recommended for larger shades GALAXY G-200 CLUTCH SYSTEM - EACH $38 The Galaxy G-200 Clutch System features RollEase patented Velvetrol spring system, the smoothest clutch operating system available today Galaxy clutches have the same compact, sleek appearance and outside dimensions as the standard clutch system Shades weighing up to 30 pounds require a consistent 6-7 pounds of pull force to lift Roller Shades made with the Galaxy Clutch system will have a continuous stainless steel chain G-200 Specifications: Max weight 2 tube: 20 lbs. Max shade width 120 Reduces pull force approx 30% GALAXY G-400 CLUTCH SYSTEM - EACH $90 The NEW G-400 Galaxy Clutch System uses RollEase s patented* planetary gear and clutch combination to greatly reduce the pull force needed to lift a shade up to 40 lbs Galaxy clutches have the same compact, sleek appearance and outside dimensions as the standard clutch system allowing you to have a consistent look on any size shade Roller Shades made with the Galaxy Clutch system will have a continuous stainless steel chain G-400 Specifications: Max weight 2 tube: 40 lbs Max weight 2½ tube: 32 lbs. Max shade width 144 Reduces pull force approx 30% OUTDOOR-USE CLUTCH SYSTEM $30 The Outdoor-use Clutch System is specifically designed and fully warranted for outdoor use. Special stainless steel internals provide a weatherable solution which are ideal for extremely humid climates or any location where water may be of concern Outdoor clutches may be used on outdoor awnings for side sunlight protection, gazebos, decks, outdoor living areas, yachts, RV s and more The outdoor-use clutch system should only be combined with outdoor fabrics Please refer to fabric cards for specifications. Prices Effective March 1, 2015 17

R O L L E R S H A D E S Options & Surcharges H E A D R A I L S Y S T E M S CABLE-GUIDED OUTDOOR SYSTEM $70 The Cable-Guided Outdoor System allows you to secure the bottom of your roller shade on an outside installation A guided cable is attached to the top of the clutch system and runs vertically along the side of the roller shade This system can be attached to a wall, window frame or floor depending on the installation. Shade clutch system is outdoor-approved and should be only combined with outdoor fabrics Shade openness varies and effects the performance of this product in high wind conditions This product is not warranted against wind damage; shades must be pulled up in windy conditions Light gap can be slightly larger due to cable system Max width: 96 Max length: 108 Wall Mount Frame Mount NEW Safety Device (This new device comes standard with all roller shades ) This new device meets all current and upcoming 2013 CPSC and WCMA safety standards, it also offers a lower profile and improved aesthetics for a better consumer experience SAFE - Eliminates dangling bead chain and cord loops to help keep children safer COMPLIANT - Follows the WCMA Recommended Standards for Safety INNOVATIVE - Guide allows bead chain (with connectors) or cord to pass through easier, ensuring proper performance and operation STYLISH - Clear product matches any decor DURABLE - Material formulated for durability and resistance to discoloration ADVANCED - A clear advantage over spring-loaded devices with too much tension EASY - Simple to assemble and install Prices Effective March 1, 2015 18

R O L L E R S H A D E S Options & Surcharges T O P T R E A T M E N T S CASSETTE 100 HEADRAIL WITH FABRIC INSERT - Price per foot $36 The Cassette 100 Headrail with fabric insert is available with a matching fabric insert creating a designer look Intermediate bracket allows two or three shades in one headrail (minimum gap is ½ between idle ends) and can be combined with low voltage motorization, side channels or spring assist. Max width: 190 Colors Available: white, vanilla, gray, bronze, and black 120 x 84 Max size limitations: (20 mil fabric thickness): Up to 120 x 120 (21-30 mil fabric thickness): Up to 120 x 108 (31 & over mil fabrics): CASSETTE 100 HEADRAIL (NO FABRIC INSERT) - Price per foot $27 The Cassette 100 Headrail (No fabric insert) offers a greater range of drop length possibilities and can be fabricated with thicker fabrics The sleek look accommodates upscale commercial needs and affords greater residential appeal Intermediate bracket allows two or three shades in one headrail (minimum gap is ½ between idle ends) and can be combined with low voltage motorization, side channels or spring assist. Max width: 190 Colors Available: white, vanilla, gray, bronze, and black Max size limitations: (20 mil fabric thickness): Up to 120 x 120 (21-30 mil fabric thickness): Up to 120 x 108 (31 & over mil fabrics): 120 x 84 Prices Effective March 1, 2015 19

R O L L E R S H A D E S Options & Surcharges T O P T R E A T M E N T S 3 ROLLEASE ROUNDED FASCIA - Price per foot $24 3 FASCIA BRACKETS (SOLD SEPARATELY) - Price per pair $32 Max size limitations: (up to 30 mil fabric thickness): Up to 96 x 96 (over 31 mil fabric thickness): Up to 96 x 84 The 3 Rollease Rounded Fascia affords greater decorative appeal for both commercial and residential applications This comes with a universal rounded end cap that works on either the left or right side and IB or OB applications Brackets are sold separately Colors Available: white, vanilla, silver, and bronze Max width of 144 for 2 on 1; center notch for control to be made by installer to ensure proper alignment. Colors Available: white, vanilla, silver, and bronze 3 ROLLEASE DELUXE SQUARE FASCIA - Price per foot $20 3 FASCIA BRACKETS (SOLD SEPARATELY) - Price per pair $16 Max size limitations: (up to 30 mil fabric thickness): Up to 96 x 96 (over 31 mil fabric thickness): Up to 96 x 84 The 3 Rollease Deluxe Square Fascia is a great alternative when you need a cost effective product. The difference between the contract grade product and this product is the paint finish. This product has a powder coated durable paint finish that exudes quality! Brackets are sold separately Max width of 144 for 2 on 1; center notch for control to be made by installer to ensure proper alignment. Bracket covers are available for OB applications upon request. Colors Available: white, vanilla, bronze Prices Effective March 1, 2015 20

R O L L E R S H A D E S Options & Surcharges T O P T R E A T M E N T S 4 ROLLEASE DELUXE SQUARE FASCIA - Price per foot $22 4 FASCIA BRACKETS (SOLD SEPARATELY) - Price per pair $22 The 4 Rollease Deluxe Square Fascia is a high quality product with a powder coated durable paint finish. Brackets are sold separately. Max width of 144 for 2 on 1; center notch for control to be made by installer to ensure proper alignment. Available with side channels, spring assist and 110V AC motors. Bracket covers are available for OB applications upon request. Max size limitations: (up to 30 mil fabric thickness): Up to 132 x 144 (over 31 mil fabric thickness using a 2 tube): Up to 132 x 108 (over 31 mil fabric thickness using a 1½ tube): Up to 96 x 120 Colors Available: white, vanilla, silver, bronze, and black 1 PIECE BLACKOUT SIDE CHANNEL (LEFT/RIGHT PAIR) - Price per foot $28 1 PIECE BOTTOM CHANNEL (WHITE OR BRONZE) - Price per foot $16 The One-piece Blackout Side Channel System prevents light from escaping into your room The application of felt inserts (included in price) completes the sealing for an energy efficient window treatment. Not recommended for outside mount Custom cutting of the side channel/shade fabric is required by installer. Colors Available: white andbronze Prices Effective March 1, 2015 21

R O L L E R S H A D E S Options & Surcharges T O P T R E A T M E N T S CLASSIC FABRIC WRAPPED CORNICE - PRICE PER FOOT $40 The Classic Cornice fabric-wrapped Cornice is approximately8 in height This cornice is made of wood; covered with batting and upholstered in any Coulisse fabric except Nature fabric Collection Larger face sizes are available; please contact customer service for a price quote Standard 2 dust cap with returns Returns can be made up to 6 deep at no charge Outside Measurements: overall finished width Inside Measurements: inside return to inside return Cornice does not include brackets CLASSIC LOW PROFILE FABRIC WRAPPED CORNICE - PRICE PER FOOT $34 Valance options available: 5 height, Batting, Returns can be made to 6 deep no charge Standard 3 dust cap with NO returns Outside Measurements: overall finished width Inside Measurements: inside return to inside return Cornice does not include brackets Not available with Coulisse Nature Collection fabrics Low profile Cornice comes standard 4 height with no batting. CLASSIC IB SHADE VALANCE - PRICE PER FOOT $28 The Classic IB Shade Valance is approximately 8 in height and mounted to a header wood board which is easily installed into the top of the window frame This is only available as an inside mounted valance Mounted on a 1 x ¾ header Optional deeper headers available upon request at additional charge Fabrics Available: All fabrics Prices Effective March 1, 2015 22

R O L L E R S H A D E S Options & Surcharges B O T T O M H E M B A R S HEAT SEALED BOTTOM HEMBAR INCLUDED IN ROLLER SHADE PRICE Shades can be fabricated with a heat sealed bottom hembar with open ends: Optional application is a heat sealed hembar with aluminum insert and open ends Standard: (included in window shade price) Roller shades can be fabricated with an optional heat sealed bottom hembar with sealed ends: Optional heat sealed hembar with aluminum insert and sealed ends. MUST BE REQUESTED UPON RECEIPT OF PURCHASE ORDER: External Fabric Rapped Aluminum Hembar Roller shades are fabricated with an fabric rapped external aluminum bottom hembar: Hembar Max width is 144 Optional external aluminum bottom hembar Must be requested upon receipt of purchase order: (additional $4.00 per ft.) Prices Effective March 1, 2015 23

ROLLER SHADE INSTALLATION INSTRUCTIONS STEP 1: CHECK PACKAGE CONTENTS If any parts are missing, please call the place of purchase for replacement Roller Shade Universal End Plug Bracket Universal Clutch Bracket Stopper Bead Qty (4) installation screws needed; supplied by installer STEP 2: TOOLS REQUIRED Tape Measure - Pencil - Screwdriver or ¼ Hex driver - Tape STEP 3: BRACKET LOCATION & INSTALLATION Your Window Shade may be installed either inside or outside of the window frame The universal brackets shown above can be mounted as inside, outside or as ceiling brackets These brackets can also be mounted on either side of the shade to correspond with how the blind control was ordered When measuring and installing shades make sure there is some play between the roller and the brackets Shades mounted too tight in the brackets may not function properly IB or Inside Mount OB or Outside Mount STEP 4: MOUNTING THE BRACKETS & SHADE Inside Mount The universal brackets included are designed to give proper clearance for your shade s operation when installed against the top corner of your window frame Make sure that the Universal Clutch bracket is installed on the same side as the control end of your window shade Install both brackets to each corner of your window frame and install the shade. Install the clutch end first, then place the idle end in the bracket and be sure to lock the metal clasp Install brackets to the top corner of your window frame Outside Mount The Universal brackets included are designed to give proper clearance for your shades operation when installed against the side frame of your window Make sure that the Universal Clutch bracket is installed on the same side as the control end of your window shade The measurement between the outside edge of both brackets will measure ¼ inch larger than the ordered size of your blind, so a 30 inch shade would have a measurement of 30 ¼ inches from outside edge to outside edge of the brackets. Install the shades by installing the clutch end first, then place the idle end in the bracket and be sure to lock the metal clasp Install brackets to the outside frame measurement from outside bracket edge to outside bracket edge is 1/4 inch larger than the ordered shade width STEP 5: SHADE FINAL ADJUSTMENT If your shade does not roll up straight simply apply a piece of tape to the proper side of the shade If your shade veers toward the RIGHT, lower the shade completely and place a piece of tape (more than one piece may be needed), as close to the LEFT edge of the roller as possible This will act as a shim Once your shade is raising and lowering properly you then lower your shade to the proper length Take the stopper bead and bend it at the crease This bead is installed on the beaded chain to stop the shade at the proper length Place this bead on the front side of the chain If your shade veers toward the LEFT, lower the shade completely and place a piece of tape (more than one piece may be needed), as close to the RIGHT edge of the roller as possible This will act as a shim 24

R O L L E R S H A D E S Top Treatments: Four different top treatments are available for double roller blinds Cassette: This cassette is standard and included in the price charts Optional Aluminum Headrail with Standard bottom rail Included in the price charts - must specify color of bottom rail Optional Aluminum Headrail with Ultimate bottom rail. Use Ultimate Surcharge price chart - must specify bright or satin finish. Optional Ultimate Fascia: Available for a surcharge Fabric: Pay close attention to the maximum width of the fabric when dealing with wide windows Double roller shades are limited to a maximum width of 96. Double roller shade fabrics can NOT be railroaded; the width of the shade is limited to the width of the fabric Bottom Rail: Standard bottom rail is available in white, ivory, black, and gray, matches the cassette Brown also available but does not match the cassette Bottom Rails not available in Bronze Ultimate bottom rail is available in bright and satin aluminum and matches the Ultimate Fascia Outside wall mount only Cassette - Standard Colors: white, ivory, black, bronze & gray Light gap 1½ total Optional Aluminum Headrail (2½ Depth) Color: white Standard Ceiling Mount Snap-on Brackets Wall mount - must specify at time of order Light gap 1½ total Excellent option for under Cornices, Ceiling mount pockets Optional Ultimate Fascia Colors: bright & satin aluminum Additional surcharge applies Light gap 2 total 25

Coulisse Double Roller Shade Index FABRIC Collection: MAX. WIDTH PRICE CHART Coulisse Block 96" XII Coulisse BoraBora* 96 XI Coulisse Fiji 96 XI Coulisse Honey 96" XII Coulisse Hydra 96 XI Coulisse Kos - XXL 96 X Coulisse Madagascar 96 XI Coulisse Maladives 96 XI Coulisse Naxos 96" XI Coulisse Oval 96" XII Coulisse Parga 96 XI Coulisse Poros 96" XI Coulisse Samos 96" XI Coulisse Skiathos - XL 96 X Coulisse Skyros 96" XI Coulisse Triangle 96" XII Coulisse Zakynthos 96 IX PAGE # *Due to fabric thickness/weight this pattern has different specifications. Cassette 100-84 x 60 max drop, over 84 x 42 max drop Cassette 120-84 x 90 max drop, over 84 x 72 max drop 30 29 29 30 29 28 29 29 29 30 29 29 29 28 29 30 27 Coulisse 26

HEIGHT - IN INCHES R O L L E R S H A D E S Zakynthos CHART XII WIDTH - IN INCHES (TIP TO TIP) UP TO 24" 30" 36" 42" 48" 54" 60" 66" 72" 84" 96" 36" 299 338 378 413 451 490 525 565 663 743 818 42" 318 356 398 440 481 524 565 606 706 794 876 48" 335 378 423 466 511 556 605 651 753 843 935 54" 348 396 444 494 543 593 646 700 798 894 1,000 60" 364 418 468 520 573 629 685 743 841 951 1,066 66" 380 438 493 548 606 668 730 790 886 1,011 1,133 72" 398 458 518 576 640 706 771 838 935 1,068 1,200 78" 408 473 535 601 668 738 805 876 979 1,123 1,260 84" 424 493 558 633 703 775 851 925 1,030 1,183 1,328 90" 443 511 583 660 738 818 893 971 1,079 1,239 1,395 96" 459 533 608 689 771 853 933 1,014 1,130 1,298 1,461 102" 526 609 693 784 868 946 1,058 1,160 1,243 1,413 1,574 108" 554 643 730 825 911 998 1,113 1,223 1,308 1,484 1,658 114" 589 680 775 876 971 1,060 1,178 1,296 1,388 1,574 1,756 120" 633 729 833 938 1,036 1,133 1,260 1,388 1,484 1,688 1,883 Cassette and bottom rail are included in price grid; Colors available: white, ivory or black ULTIMATE SURCHARGE 24 30 36 42 48 54 60 66 72 84 96 113 118 121 126 131 135 140 145 149 159 168 Colors available: bright and satin aluminum 27

HEIGHT - IN INCHES R O L L E R S H A D E S Kos XXL, Skiathos XL CHART XIII WIDTH - IN INCHES (TIP TO TIP) UP TO 24" 30" 36" 42" 48" 54" 60" 66" 72" 84" 96" 36" 374 421 471 515 564 613 656 706 828 929 1,023 42" 396 445 496 550 601 655 706 758 883 993 1,095 48" 419 473 528 583 639 695 756 814 940 1,054 1,169 54" 435 495 555 618 679 740 808 875 998 1,118 1,250 60" 455 523 585 650 715 786 856 929 1,051 1,189 1,333 66" 475 548 616 685 758 834 913 988 1,108 1,264 1,416 72" 496 571 646 720 800 883 964 1,046 1,169 1,334 1,500 78" 509 591 669 751 835 923 1,006 1,095 1,224 1,403 1,575 84" 530 616 698 790 879 969 1,064 1,156 1,288 1,478 1,660 90" 554 639 729 825 921 1,023 1,115 1,214 1,349 1,549 1,744 96" 574 666 760 861 964 1,065 1,165 1,268 1,413 1,621 1,826 102" 658 761 866 980 1,085 1,183 1,321 1,450 1,553 1,765 1,968 108" 693 803 913 1,031 1,139 1,246 1,390 1,528 1,634 1,855 2,073 114" 736 850 969 1,095 1,214 1,325 1,473 1,620 1,734 1,968 2,195 120" 790 911 1,040 1,171 1,295 1,416 1,575 1,734 1,855 2,109 2,353 Cassette and bottom rail are included in price grid; Colors available: white, ivory or black ULTIMATE SURCHARGE 24 30 36 42 48 54 60 66 72 84 96 113 118 121 126 131 135 140 145 149 159 168 Colors available: bright and satin aluminum 28

R O L L E R S H A D E S Bora Bora, Fiji, Hydra, Madagascar, Maldives, Naxos, Parga, Poros, Samos, Skyros HEIGHT - IN INCHES CHART XIV WIDTH - IN INCHES (TIP TO TIP) UP TO 24" 30" 36" 42" 48" 54" 60" 66" 72" 84" 96" 36" 468 526 589 644 704 766 821 883 1,034 1,160 1,279 42" 495 558 620 688 753 820 883 948 1,103 1,240 1,369 48" 524 590 660 728 799 869 945 1,018 1,176 1,318 1,460 54" 545 619 695 771 849 925 1,009 1,094 1,248 1,398 1,563 60" 569 654 731 813 894 984 1,070 1,160 1,315 1,486 1,665 66" 594 685 770 856 948 1,043 1,141 1,235 1,385 1,580 1,771 72" 620 714 808 899 1,000 1,103 1,205 1,308 1,460 1643 1,875 78" 636 740 836 939 1,044 1,154 1,259 1,369 1,529 1,754 1,969 84" 663 770 871 988 1,099 1,211 1,330 1,445 1,609 1,846 2,075 90" 691 799 911 1,031 1,153 1,278 1,394 1,516 1,686 1,936 2,180 96" 718 834 950 1,076 1,205 1,331 1,456 1,584 1,765 2,026 2,283 102" 823 951 1,084 1,225 1,356 1,479 1,651 1,813 1,940 2,205 2,460 108" 866 1,003 1,141 1,290 1,424 1,558 1,738 1,910 2,043 2,319 2,590 114" 920 1,063 1,211 1,369 1,516 1,658 1,841 2,025 2,168 2,460 2,745 120" 988 1,139 1,300 1,465 1,619 1,771 1,969 2,168 2,319 2,636 2,941 Cassette and bottom rail are included in price grid; Colors available: white, ivory or black ULTIMATE SURCHARGE 24 30 36 42 48 54 60 66 72 84 96 113 118 121 126 131 135 140 145 149 159 168 Colors available: bright and satin aluminum 29

Coulisse Double Roller Shades - Charts XV Coming Soon Block, Honey, Oval, Triangle HEIGHT - IN INCHES DOUBLE ROLLER SHADES - CHART XV WIDTH - IN INCHES (TIP TO TIP) UP TO 24" 30" 36" 42" 48" 54" 60" 66" 72" 84" 96" 36" 562 632 707 773 845 920 985 1059 1240 1393 1535 42" 594 669 745 825 903 983 1059 1138 1323 1488 1643 48" 629 708 793 873 959 1043 1134 1222 1412 1582 1753 54" 654 743 834 925 1018 1110 1210 1312 1498 1678 1875 60" 683 785 878 975 1073 1180 1284 1393 1578 1784 1998 66" 713 823 924 1028 1138 1252 1370 1482 1663 1896 2125 72" 744 857 969 1079 1200 1323 1447 1569 1753 2002 2250 78" 764 888 1004 1127 1253 1385 1510 1643 1835 2105 2363 84" 795 924 1045 1185 1319 1454 1597 1734 1930 2215 2490 90" 830 959 1094 1238 1383 1533 1673 1820 2024 2324 2617 96" 862 1000 1140 1292 1447 1598 1748 1900 2118 2432 2739 102" 988 1142 1300 1470 1628 1775 1982 2175 2328 2647 2953 108" 1040 1203 1370 1548 1869 1869 2085 2293 2452 2783 3108 ULTIMATE SURCHARGE 24 30 36 42 48 54 60 66 72 84 96 Bright 113 118 121 126 131 135 140 145 149 159 168 Satin 113 118 121 126 131 135 140 145 149 159 168 Colors available: bright and satin aluminum, includes top and bottom rail. ULTIMATE SURCHARGE - BOTTOM RAIL ONLY 24 30 36 42 48 54 60 66 72 84 96 62 68 73 79 85 92 98 103 109 122 133 Colors available: bright and satin aluminum - bottom rails are priced the same Coulisse 30

NON-TRANSFERABLE LIFETIME LIMITED WARRANTY FOR CUSTOM BLINDS AND SHADES Limited Lifetime warranty on custom made blinds and shades to the original purchaser provided the product remains in the original window Included in warranty: Custom made blinds and shades are warranted against manufacturing defects (flaws in the product design, materials or workmanship) that may cause the product to malfunction) Exceptions: 1 Cords including internal cords are warranted for a period of two (2) years 2 Coulisse warrants its motors to be free from defects in material and workmanship under normal and proper use for a period of three (3) years starting from the date stamped on the motor Drapery motors, mechanical, electrical and electronic accessories (excluding batteries) are warranted for three (3) years from the date of invoice Not Included in warranty: The warranty does not cover damages or deterioration due to the following reasons: 1 Normal wear and tear of the product including: -abuse -exposure to salt air -improper operation -accident -improper cleaning -misapplication -alterations -improper handling -misuse -damage from pets/insects -improper installation -high wind conditions 2 Any product that with the passage of time: -loses color intensity -experiences a loss of pleating -yellows or cracks 3 Natural Woods: -variations in color, grain or texture -warping of wood slats in high-humidity areas 4 Costs associated with: -product removal -product reinstallation -incidental damage -product re measure -transportation to and from the retailer -shipping In the event multiple blinds/shades are in the same room, only the defective blind/shade will be replaced THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, LIABILITIES, OR OBLIGATIONS 31

Custom Blind Fabricators 22525 Hoover Warren, MI 48089 P. 586-754-4405 F. 586-754-4406 orders@cbfab.com www.cbfab.com