420CT-440CT Series 3 445CT vertical lift Series 3

COMPACT TRACKED SKID STEER 420CT-440CT Series 3 445CT vertical lift Series 3 420CT Series 3 440CT Series 3 445CT Series 3 Operating load 1297 1361 1497 Engine Horsepower 55 kw - 74 hp 67 kw - 90 hp 61 kw - 82 hp Operating weight 3783 4048 4630 P R O F E S S I O N A L P A R T N E R

DRIVING FORCE Turbocharged, 4 cylinders, Tier 3 engines provide ighty power and assive torque to push through the toughest site conditions. Gear type hydraulic pup ensures plenty of hydraulic power for breakout, lift and attachents. Auxiliary hydraulics circuit is standard on all Case copact track skid steers, high flow is an option. Power to perfor. Total versatility. STRUCTURAL INTEGRITY Fully welded steel chassis, straddle ounted pins and bushings on the loader ars, radial lift (420CT, 440CT) or vertical lift (445CT) lift kineatics ensure powerful, durable digging and lifting abilities. The standard echanical quick coupler is copatible not only within the range but also with forer Case XT s, 400 series skid steers, Case E sall wheel loaders but also with all ajor anufacturers of skid steers and related attachents. Optional hydraulic quick coupler is of course available. Loader strength. Robust design. ALL TERRAIN Dozer style undercarriage has rigid track fraes and an elevated final drive for protection fro daage and ease of service. Oversize bearings in line with drive sprocket offer durability and reliability. All sealed rollers and idlers are oil lubricated for longer service life. Durable design. Reliability guaranteed. 2 REDUCED DOWNTIME Lift up panel in engine canopy and swing out rear panel provides easy access to daily service checks. Tilting cab allows access in less than a inute to the engine, the transission and hydraulics, thus cutting service downtie tie and boosting productivity. Easy access. Maxiu uptie.

ADDITIONAL FLOW Standard auxiliary hydraulics circuit, working at the pressure and flow of the hydraulic syste, is equipped with ISO flat face quick disconnects on all odels. Additional Case drain plubing ( syste for hydraulic tools needing pressure release), high flow circuit or auxiliary electrical circuit are also available to power deanding hydraulic tools like cold planers, stup grinders or any of the vast choice of tools offered by the Case parts syste. Versatility built in. Operator control. PILOT CONTROLS Standard hydraulic control levers offer precision with low effort. Straight line forward and reverse operations are easy to control, increasing productivity in fine grading and dozing operations. Ease of operation boosts productivity and efficiency. Standard ISO pattern controls used for European version eans left handle controls direction (forward/reverse/counter-rotation) and right handle controls equipent (ar and bucket). Non European version can opt for either ISO or the Case classic H pattern. H pattern eans left handle controls the left wheels (forward/reverse) and the ar (raise/lower) whereas the right handle controls the right wheels (forward/reverse) and the bucket (rollback/dup). High precision low effort. TWO SPEED The Case CT s have standard two-speed tracking, offering a travel speed of 13.8 kph-k/h boosting productivity. Reliability and durability. COMPACT DIMENSIONS Excellent stability in short diensions offer superb anoeuvrability. Heavier than a wheeled skid steer, the copact tracked skid steers retain a low ground bearing pressure for use in sensitive ground conditions. They are agile yet powerful perforers, capable of dozing, digging, lifting, loading and powering a wide range of attachents. Stability and strength. Maxiu productivity. 3

LOADER/DOZER The Case CT s have a heavy duty steel chassis, loader ars with straddle ounted pins and bushings for durability. With consequent operating weight, the copact achine have high tipping loads capacities and high operating loads. Breakout force at the bucket is powerful. Case skid steers are renowned for their durable build quality and high productivity. The CT s take that perforance to a new level, boosting productivity in the toughest applications. Case CT s offer a highly versatile solution in wet, uddy or sensitive ground conditions. Two types of kineatics are available on Case CT s: radial with 420CT and 440CT; vertical with better loading abilities with 445CT. DOZER STYLE UNDERCARRIAGE The rigid track frae with no oving parts reduces aintenance costs copared to suspension track systes. The steel track scrapers and tapered track frae keep aterial and ud fro ipeding track oveent, the angled track frae cover decreases ud and aterial build-up on the track frae. The siple track adjustent siplifies track tensioning by adding grease to a hydraulic tensioning cylinder. The duo cone face seal technology reduces aintenance costs and provides longer life by using proven dozer technology on rollers and idlers. The triple flange rollers helps prevent detracking on inclines by using dozer style rollers with a larger inner diaeter flange positioned between the track tabs. RELIABILITY The elevated drive otor/final drive increases coponent life by using an oversized bearing in line with the drive sprocket. The sealed and oil lubricated rollers & idlers provides greater reliability and lowers aintenance costs by reducing the possibility of aterial and oisture getting into the rollers and idlers. The excellent fit and finish iniizes exposure to aterial and oisture with a tightly fit-and-finished track frae with fewer oving parts than copetitive designs. The long life, sooth ride provides longer lasting track and a soother ride by using steel ebedded tracks and rolling on the rubber instead of on steel (track patterns and structures differ fro one odel to another). 4

OPERATOR S CAB The new ergonoically designed, wider, CT Series 3 punched cab with its unique side lights is ROPS/FOPS level 1. It is available with or without side windows, high visibility door, deolition door or optional air conditioning. Standard hydraulic ISO pilot controls (left handle: travel/right handle : ar) are responsive and easy to use, providing precision control with low fatigue for the operator. Visibility to the top, to the bucket or the attachent has been vastly iproved in all positions increasing cofort of use and safety. The view to the rear of the achine has been iproved by the new enlarged rear window. Wider integral ergonoic arrests and safety seatbelt are standard equipent. The achine s hydraulic functions have a safety lockout syste to prevent unintentional oveent of the ars. The control switches and control panels are fitted in the Rops pillars of the cab for convenience and non-obstruction to the visibility to the working area. 5

ENGINE The Case Series 3 CT s are powered by Tier 3 eission certified, 4 cylinder, diesel turbo engines designed for Case with efficiency and fuel econoy in ind. 420CT (radial lift) and 445CT (vertical lift) are equipped with the new 3.2 litre turbo tier 3 engine developing respectively 74 hp and 82 hp. The ighty 440CT (radial lift) is equipped with the 4.5 litre turbo tier 3 engine of 90 hp. Strong torques offer ipressive ri pull to keep the achine oving and recovering in the toughest of conditions, aiding digging and loading perforance. Side by side radiator and cooler are assive (no need of additional cooling for high flow option) and help preserve engines, oil qualities and coponents. HYDRAULICS Gear pup and 3 spool open center syste offer optiu hydraulic power. Standard auxiliary hydraulics (working at flow and pressure of the ain syste) drive ost hydraulic attachents. For ore hydraulic power deanding tools, optional high flow hydraulics can be specified for planers, stup grinders and other alike attachents. All CT s can share attachents with the popular Case skid steer range, XT s, 400 series and all other ajor brands, thanks to their universal coupler. MAINTENANCE Regular service ites can be easily accessed through a lift up panel on top of the engine cover and a full swing-out door to the rear of the achine. For ore in-depth aintenance the entire cab structure can easily be tilted forward in less than a inute, to provide unparalleled access to the centre of the achine. 6

DOZER STYLE UNDERCARRIAGE BUILT WITH THE DOZER IN MIND The rigid track frae with no oving parts reduces aintenance costs copared to suspension track systes. Designed with steel track scrapers and a tapered track frae to keep aterial and ud fro ipeding track oveent. DRIVE MOTOR/ FINAL DRIVE Increases coponent life by using an oversized bearing in line with the drive sprocket and elevating the drive assebly, keeping it out of aterial. ANGLED TRACK FRAME COVER Decreases ud and aterial build-up on the track frae with Case dozerstyle agled track frae and aterial scrapers. SIMPLE TRACK ADJUSTMENT Siplifies track tensioning by adding grease to a hydraulic tensioning cylinder. SEALED AND OIL LUBRICATED ROLLERS & IDLERS Provides greater reliability and lowers aintenance costs by reducing the possibility of aterial and oisture getting into the rollers and idlers. DUO CONE FACE SEAL TECHNOLOGY Reduces aintenance costs and provides longer life by using proven dozer technology on rollers and idlers. TRIPLE FLANGE ROLLERS Helps prevent de-tracking on inclines by using dozer style rollers with a larger inner diaeter flange positioned between the track tabs. Note: Photograph cutaway here designed to display the engineering concepts used on Case CT undercarriage. The 420CT and 440CT odels undercarriage has 3 rollers (not 4 as displayed on cutaway). EXCELLENT FIT AND FINISH Miniizes exposure to aterial and oisture with a tightly fit-and-finished track frae with fewer oving parts than copetitive designs. LONG LIFE, SMOOTH RIDE Provides longer lasting track and a soother ride by using steel ebedded tracks and rolling on the rubber instead of on steel. 7

SPECIFICATIONS 420CT Series 3 ENGINE Make Iveco SpA (for Case) EPA* faily 8VEXL03.2TCI Model F5CE9454E*A Engine type F5CE9454E*A002 Type 4-stroke, turbocharged Cylinders 4 Horsepower per SAE Gross 74 (55 kw) @ 2500 rp Net 69 (51 kw) @ 2500 rp Peak torque @ 1400 rp 275 N Displaceent 3.2 l Fuel injection Direct Cooling style Internal Water pup Style Centrifugal Flow 109.8 l/in HYDRAULIC SYSTEM Standard equipent pup Type Gear pup Displaceent 36.1 cc Pup flow @ rated engine rp Total 90.1 l/in Loader control valve 3 spool open center Relief pressure 210 bar Optional high flow @ rated engine rp Total 125.8 l/in ELECTRICAL SYSTEM Alternator 95 ap Starter 2.7 kw Battery 12-volt low-aintenance 1125 cold-cranking aps @ -17.8 C SERVICE CAPACITIES Fuel tank 88.2 l Engine oil w/filter 8.5 l Engine cooling syste 11.4 l Hydraulic syste Reservoir 26.8 l Total 50 l POWERTRAIN Travel speed Low range 9.3 rph-k/h High range (trigger actuated) 13.5 rph-k/h Drive pup Tande, axial piston hydrostatic transission with integral charge pup driven directly off engine flywheel Final drive Double-reduction planetary Controls Pilot Pup to engine ratio 1:1 Undercarriage Torque @ ax displaceent and relief pressure 3579 N Track adjustent Hydraulic Frae Rigid Length of track on ground 1438 Track rollers per side 3 Front idler diaeter 350 Rear Idler diaeter 290 Botto Rollers Outer flange diaeter 200 Center flange diaeter 214 Sprocket Teeth Nuber 17 46 Track rollers and idlers sealed with duo cone face seals and peranently lubricated bushings Parking brakes Spring applied, hydraulic release disc Engageent Depress on/off brake button, raise seat bar, get off seat, or stop engine TRACKS Ground Pressure 40 kpa Area per track 4593 c2 to Outside of Track 1654 Track width 320 OPERATING WEIGHTS Unit equipped with 320 track, 1.67 foundry/excavating bucket, echanical attachent coupler, full fuel tank and 75 operator 3783 Shipping weight 3488 Add-on weights Side cab glass 32 Glass door with wiper 35 Suspension seat 4,5 * Environental Protection Agency 8 OPTIONAL BUCKETS FOUNDRY/EXCAVATING Heaped capacity 3 LOW PROFILE EXTENDED Heaped capacity 3 LOW PROFILE Heaped capacity 3 0.43 0.47 0.52 1.67 1.82 1.98 168 177 225 0.44 0.49 1.67 1.82 197 216 0.37 0.41 1.67 1.82 181 193 HEAVY DUTY/DIRT Heaped capacity 3 UTILITY/LIGHT MATERIAL Heaped capacity 3 0.37 0.41 0.45 1.67 1.82 1.98 215 227 239 0.67 0.79 1.82 2.13 197 225 For other bucket sizes, please contact your CASE dealer

GENERAL DIMENSIONS 420CT Series 3 L G S A B J R C H D Q T P K M E F V Z A B C D E F G H Overall operating height w/foundry/excavating bucket - short lip w/low profile bucket - standard lip w/low profile extended bucket - long lip Height to Bucket hinge pin Top of rollover protective structure Botto of level bucket, loader ar fully raised Overall length w/o attachent with coupler w/foundry/excavating bucket on ground w/low profile bucket on ground w/low profile extended bucket on ground Dup angle at axiu height Dup height - loader ar fully raised* w/foundry/excavating bucket w/low profile bucket w/low profile extended bucket *Equipped with 320 track PERFORMANCE SPECS Tipping capacity @ 35% Tipping capacity @ 50% Tipping load Breakout force Bucket circuit Loader circuit Dig depth cutting edge horizontal Cycle tie Raise Lower Dup Rollback N N 3.89 4.03 4.16 3.07 2.02 2.88 2.60 3.29 3.38 3.50 39 2.42 2.33 2.24 907 1297 2592 25244 24479 3 3.6 2.6 1.3 1.6 SAE rated lift capacities. Breakout force and cycle tie easured with rated load in F/E bucket. J K L M P Q R S T V Z Dup reach - loader ar fully raised w/foundry/excavating bucket w/low profile bucket w/low profile extended bucket Maxiu attachent rollback Bucket on ground Bucket at full height Length of track on ground Ground clearance Botto of belly pan Angle of departure Clearance circle front Less bucket w/1.68 foundry/excavating bucket on ground w/1.68 low profile bucket on ground w/1.68 low profile extended bucket on ground Clearance circle rear Track gauge, centerline to centerline over tracks 0.63 0.74 0.84 29 96 1.39 213 32 1.36 2.05 2.14 2.26 1.45 1.33 1654 9

10

11

SPECIFICATIONS 440CT Series 3 ENGINE Make CNH U.K. Liited (for Case) EPA* faily 8NHXL04.5DTD Model type 445T/MMC Engine odel F4GE9454C*J Type diesel, Tier III certified, 4-stroke, turbocharged Cylinders 4 Horsepower per SAE Gross 90 hp (67 kw) @ 2300 rp Net 83 hp (62 kw) @ 2300 rp Peak torque @ 1300 rp 390 N Displaceent 4.5 l Fuel injection Direct Cooling style Internal Water pup Style Centrifugal HYDRAULIC SYSTEM Standard equipent pup Type Gear pup Displaceent 36.1 cc Pup flow @ rated engine rp Total 83 l/in Loader control valve 3 spool open center Relief pressure 210 bar Optional high flow @ rated engine rp Total 143.1 l/in ELECTRICAL SYSTEM Alternator 95 ap Starter 2.7 kw Battery 12-volt low-aintenance 1125 cold-cranking aps @ -17.8 C SERVICE CAPACITIES Fuel tank 88.2 l Engine oil with filter 12 l Engine cooling syste 11.4 l Hydraulic syste Reservoir 26.9 l Total 50 l POWERTRAIN Travel speed Low range 8.0 rph-k/h High range (optional) 12.9 rph-k/h Drive pup Tande, axial piston hydrostatic transission with integral charge pup driven directly off engine flywheel Final drive Single-reduction planetary Controls Pilot Pup to engine ratio 1:1 Undercarriage Torque @ ax displaceent and relief pressure 4208 N Track adjustent Hydraulic Frae Rigid Length of track on ground 1438 Track rollers per side 3 Front idler diaeter 350 Rear Idler diaeter 290 Botto Rollers Outer flange diaeter 200 Center flange diaeter 214 Sprocket Teeth Nuber 17 46 Track rollers and idlers sealed with duo cone face seals and peranently lubricated bushings Parking brakes Spring applied, hydraulic release disc Engageent Depress on/off brake button, raise seat bar, get off seat, or stop engine TRACKS Ground Pressure 35 kpa Area per track 5740 c2 to Outside of Track 1814 Track width 400 OPERATING WEIGHTS Unit equipped with 400 track, 1.8 foundry/excavating bucket, echanical attachent coupler, full fuel tank and operator (75 ) 4048 Shipping weight 3744 Add-on weights Side cab glass 32 Glass door w/wiper 35 Suspension seat 4.5 * Environental Protection Agency OPTIONAL BUCKETS FOUNDRY/EXCAVATING Heaped capacity 3 0.47 0.52 1.82 1.98 177 197 LOW PROFILE Heaped capacity 3 0.41 1.82 193 LOW PROFILE EXTENDED Heaped capacity 3 HEAVY DUTY/DIRT Heaped capacity 3 0.49 0.53 1.82 1.98 216 205 0.41 0.45 1.82 1.98 227 239 UTILITY/LIGHT MATERIAL Heaped capacity 3 0.67 0.79 1.82 2.13 197 225 For other bucket sizes, please contact your CASE dealer 12

GENERAL DIMENSIONS 440CT Series 3 L G S A B J R C H D Q P K T M E F V Z A B C D E F G H Overall operating height with foundry/excavating bucket - short lip with low profile bucket - standard lip with low profile extended bucket - long lip Height to Bucket hinge pin Top of rollover protective structure Botto of level bucket, loader ar fully raised Overall length without attachent with coupler with foundry/excavating bucket on ground with low profile bucket on ground with low profile extended bucket on ground Dup angle at axiu height Dup height - loader ar fully raised* with foundry/excavating bucket with low profile bucket with low profile extended bucket *Equipped with 400 track 3.91 4.05 4.18 3.09 2.05 2.90 2.06 3.29 3.43 3.65 39 2.43 2.35 2.27 PERFORMANCE SPECS J K L M P Q R S T V Z Dup reach - loader ar fully raised w/foundry/excavating bucket w/low profile bucket w/low profile extended bucket Maxiu attachent rollback Bucket on ground Bucket at full height Length of track on ground Ground clearance Botto of belly pan Angle of departure Clearance circle front Less bucket with 1.8 foundry/excavating bucket on ground with 1.8 low profile bucket on ground with 1.8 low profile extended bucket on ground Clearance circle rear Track gauge, centerline to centerline over tracks 0.62 0.74 0.84 29 96 1.44 236 34 1.36 2.02 2.10 2.22 1.45 1.41 1814 Tipping capacity @ 35% Tipping capacity @ 50% Tipping load Breakout force Bucket circuit Loader circuit Dig depth cutting edge horizontal Cycle tie Raise Lower Dup Rollback SAE rated lift capacities. N N 953 1361 2722 27610 20355 25 4.1 2.6 1.7 1.9 13

14

15

SPECIFICATIONS 445CT Series 3 ENGINE Make Iveco SpA (For Case) EPA* faily 8VEXL03.2TCE Engine type F5CE5454B*A002 Engine odel F5CE5454B*A Type diesel, Tier III certified, 4-stroke, turbocharged Cylinders 4 Horsepower per SAE Gross 82 (61 kw) @ 2500 rp Net 77 (57 kw) @ 2500 rp Maxiu torque @ 1400 rp Gross 310 N Displaceent 3.2 l Fuel injection Direct Cooling style Internal Water pup Style Centrifugal HYDRAULIC SYSTEM Standard equipent pup Type Gear pup Displaceent 36.1 cc Pup flow @ rated engine rp Total 90.1 l/in Loader control valve 3 spool open center Relief pressure 210 bar Optional high flow @ rated engine rp Total 125.8 l/in ELECTRICAL SYSTEM Alternator 95 ap Starter 2.7 kw Battery 12-volt low-aintenance 1125 cold-cranking aps @ 0 F (-17.8 C) SERVICE CAPACITIES Fuel tank 63.2 l Engine oil w/filter 8.5 l Engine cooling syste 11.4 l Hydraulic syste Reservoir 21.6 l Total 41.6 l POWERTRAIN Travel speeds Low range 8.7 rph-k/h High range 13.8 rph-k/h Drive pup Tande, axial piston hydrostatic transission w/integral charge pup driven directly off engine flywheel Final drive Single-reduction planetary Pup to engine ratio 1:1 VERTICAL LIFT Undercarriage Torque @ ax displaceent and relief pressure 4208 N Track adjustent Hydraulic Frae Rigid Length of track on ground 1638 Track rollers per side 4 Front idler diaeter 350 Rear Idler diaeter 290 Botto Rollers Outer flange diaeter 200 Center flange diaeter 214 Sprocket Teeth Nuber 17 46 Track rollers and idlers sealed with duo cone face seals and peranently lubricated bushings Parking brakes Spring-applied, hydraulic release disc Engageent Depress on/off brake button, raise seat bar, get off seat, or stop enginel TRACKS Ground Pressure (450 ) 27.6 kpa Area per track (450 ) 13776 c2 to Outside of Track (450 ) 2112 Ground Pressure (400 ) 31.1 kpa Area per track (400 ) 13120 c2 to Outside of Track (400 ) 2065 OPERATING WEIGHTS Unit equipped with 450 track, 2.13 long lip bucket, echanical attachent coupler, 75 operator and full fuel tank _ 4630 Shipping weight 4232 Add-on weights Side cab glass 32 Glass door w/wiper 35 Heater 27 Suspension seat 4,5 Hydraulic attachent coupler 17 * Environental Protection Agency OPTIONAL BUCKETS DIRT Heaped capacity HEAVY DUTY/DIRT Heaped capacity 3 3 0.54 2.13 251 0.54 2.13 281 HEAVY DUTY/UTILITY Heaped capacity UTILITY Heaped capacity 3 3 0.72 2.13 342 0.72 2.13 281 16 For other bucket sizes, please contact your CASE dealer

GENERAL DIMENSIONS 445CT Series 3 L S G A J R B C H D Q P O K T M E F V Z A B C D E F G H J Overall operating height Dirt bucket Height to Bucket hinge pin Top of rollover protection structure Botto of level bucket, loader ar fully raised Overall length without attachent with coupler with dirt bucket on ground Dup angle at full height Dup height - loader ar fully raised dirt bucket Dup reach - loader ar fully raised dirt bucket 4.04 3.11 2.11 2.90 2.65 3.44 51 2.23 1.03 K L M O P Q R S T V Z Z Maxiu attachent rollback Bucket on ground Bucket at full height Length of track on ground Ground clearance Botto of chain case Botto of belly pan Angle of departure Clearance circle front less bucket with 2.13 bucket in carry position Clearance circle rear Track gauge, centerline to centerline over tracks (450 ) over tracks (400 ) 27 86 1.35 1.64 236 283 47 236 1.52 2.34 1.4 1.66 2112 2065 *Equipped with 450 track PERFORMANCE SPECS Tipping capacity @ 35% Tipping capacity @ 50% Tipping load Breakout force Bucket circuit Loader circuit Dig depth cutting edge horizontal Cycle tie Raise Lower Dup Rollback N N 1048 1497 2994 29803 18683 SAE rated lift capacities. Breakout force and cycle tie easured with rated load in Long Lip Dirt Bucket. 3 4.2 2.7 1.6 2.0 17

18

19

420CT-440CT- 445CT Series 3 STANDARD EQUIPMENT & OPTIONS STANDARD EQUIPMENT Engine Tier 3 low eissions certified 4 cylinder Turbo 3.2 litre (420CT series 3-74 hp; 445CT series 3-82 hp) 4.5 litre (440CT series 3-90 hp) Integral liquid cooling Heavy-duty radiator ( side by side with hyd cooler ) Grid heater No aintenance belt Fuel filter with water trap Dual eleent air cleaner 95 ap alternator 12 Volt battery Battery disconnect switch with jup start terinals Hand and foot throttle Hydraulic Syste Gear pup Heavy duty oil cooler (side by side engine radiator) 3 spool loader control valve Auxiliary hydraulics standard (sae pressure and flow as loader circuit) Auxiliary function lockout override Loader ar-ounted ISO flat face hydraulic quick connectors Loader lift lockout override Loader function lockout syste Loader ar float position Loader Radial (420CT, 440 CT series 3) loader ar design Vertical (445CT series 3) loader ar design with heavy lift-and reach linkage Lift cylinder plubing guard Mechanical attachent coupler Loader lift ar support safety strut (420CT-440CT Series 3) Powertrain Hydraulic pilot controls (ISO pattern) SAHR (spring applied hydraulic release) disc parking brakes 2 speed (13k/h) ground drive Operator environent Tilt ROPS/FOPS level 1 canopy Water-shedding vinyl seat 51 retractable seat belt Seat presence switch Seat bar with ergonoic integral arrests ISO pattern (left travel /right ar) low effort hydraulic Pilot Controls Two speed (13k/h) trigger on hand control Loader control lockout syste Electric parking brake control Halogen lights (2 front, 2 rear, 2 side) Foot rest Cleanout panel Enlarged top window Non-visibility obstructing instruent panels Large rear window with eergency escape Headliner Storage tray Cup holder 12 Volt power plug socke Backup alar Horn Instruentation Indicators Digital Houreter Fuel level LCD bar graph with alar Warning lights with alars Engine coolant teperature Engine oil pressure Engine Malfunction Hydraulic charge pressure Hydraulic filter restriction Hydraulic oil teperature Warning alars Battery voltage (plus display) Indicator light Engine preheat Parking brake Seat bar reinder Other standard equipent Integral buper counterweight Lockable service access hood Single-point daily servicing Reote oil drain Lift cylinder guards OPTIONS Engine Air pre-cleaner/aspirator Engine block heater Hydraulics High-flow auxiliary hydraulics Second auxiliary hydraulics Attachent case drain plubing Loader Ride control (aortization of load in travel) Hydraulic attachent coupler Hydraulic self-leveling (raise only) Case drain plubing Front auxiliary electrics Operator s copartent Air conditioning and heater Vinyl full suspension seat with 76 retractable seat belt Deluxe cloth suspension full seat with heater and lubar support for enclosed cab Side windows New wide front door with wiper & washer New wide deolition front door ( 12,7 lexan polycarbonate ) Electric auxiliary hydraulic control Heater deluxe Radio Other options Deluxe instruent panel Road lights Rotating beacon Lift hooks Locking fuel cap Lift cylinder plubing guards For No. 26061086GB - Printed in Italy - LEADER Firenze - 07/08 Standard and optional equipent shown can vary by country. Worldwide Case Construction Equipent Contact Inforation EUROPE/AFRICA/MIDDLE EAST: Centre D affaires EGB 5, Avenue Georges Bataille - BP 40401 60671 Le Plessis-Belleville - FRANCE NORTH AMERICA/MEXICO: 700 State Street Racine, WI 53404 U.S.A. LATIN AMERICA: Av. General David Sarnoff 2237 32210-900 Contage - MG Belo Horizonte BRAZIL ASIA PACIFIC: Unit 1-1 Foundation Place - Prospect New South Wales - 2148 AUSTRALIA CHINA: No. 29, Industrial Preises, No. 376. De Bao Road, Waigaoqiao Ftz, Pudong, SHANGHAI, 200131, P.R.C. The call is free fro a land line. Check in advance with your Mobile Operator if you will be charged. NOTE: Standard and optional fittings can vary according to the deands and specific regulations of each country. The illustrations ay include optional rather than standard fittings - consult your Case dealer. Furtherore, CNH reserves the right to odify achine specifications without incurring any obligation relating to such changes. Confors to directive 98/37/CE CASE Construction Equipent CNH UK Ltd Unit 4, Hayfield Lane Business Park, Field Lane, Auckley, Doncaster, DN9 3FL Tel. 00800-2273-7373 Fax +44 1302 802829 www.casece.co