T-Line Valve T - 4 A N D T - 4 3 P L U G V A L V E S NEW Stainless Steel Armor Available Quality System Certificate Bulletin VT-7z
T-Line Chemical Service Valve Features These features have made Durco T-4 and T-43 valves the most preferred PTFE lined valves in the chemical process industries. Durco T-Line valves provide maximum corrosion resistance and the elimination of product contamination at a reasonable cost. Tapered Plug Is grounded to body. Double D plug stem accepts most standard actuation equipment. In-Line Adjustment Stainless adjuster with rocker-arm design assures even stem seal pressure. One Piece Ductile Iron Body Is available in ANSI class 50 and 300 lb carbon steel body. PFA Reverse Lip Diaphragm Provides static and self-adjusting dynamic stem seal. Stem Seal At top of plug provides double protection against external stem leakage. Typical applications include: Hydrochloric acid Sulfuric acid Hot rayon spin bath solution Waste acids Acid brine Other severe corrosives Corrosion Resistant Coating Is standard on body and top cap. 2 New Alloy Options Plug insert and body armor are also available in D4/36SS and other alloys. Flange Design Accommodates standard gate valve face-to-face dimensions. Encapsulated Plug Is provided in molded PFA and tapered for positive sealing. High Density, One-piece, PTFE Liner Protects the body and forms the flange gasket. Large Port Areas Assure low pressure drop and higher C v.
Benefits You ll Enjoy With Durco T-4 and T-43 Valves Solid one-piece PTFE lining in the body and on flange faces plus a PFA encapsulated plug maximizes corrosion resistance and virtually eliminates potential leak paths. A dynamic self-adjusting, self-energized reverse lip, PFA diaphragm seal prevents stem leakage. Should line pressure force liquid to the stem seal area, the self-energizing reverse lip PFA diaphragm will be forced against the stem to prevent external leakage. A sealing surface as much as 0x greater than other lined valves assures drop tight shut-off. In addition to the large sealing area, sealing is both upstream and downstream and is totally independent of line pressure. You never replace valve seats, you only reseat the plug with a quick and easy in-line adjustment. An open-end wrench and a few seconds are the extent of your maintenance requirements. There are: No seats to replace No lengthy production disruption No piping disconnection No complicated, time-consuming maintenance procedures No hazards to personnel A key design feature of T-4 and T-43 valves is the thick, one-piece continuous PTFE lining that covers all wetted surfaces in the body*. PFA covering the plug extends up the stem through the top cap. *Note: /2 in (5 mm), 3/4 in (20 mm), 0 in (250 mm) and 2 in (300 mm) have PFA lined bodies. Available In Broad Size Range And Extended Pressure Class T-4 valves offered in sizes /2 in (5 mm) through 2 in (300 mm) T-43 valves offered in sizes in (25 mm) through 6 in (50 mm) T-4 (Class 50) and T-43 (Class 300) ANSI face-to-face dimensions, flanged only Available with pneumatic or electric actuators for on-off or modulating control applications T-4 rated 80 psi (240 kpa) @ 400 F, 250 psi (724 kpa) @ 00 F T-43 rated 320 psi (2206 kpa) @ 400 F, 740 psi (502 kpa) @ 00 F Outstanding Cv characteristics better than alternative valve designs in the more common sizes T-4 and T-43 valves are rated to 30 inches Hg vacuum, at ambient The PTFE linings assure nonsticking, easy turning valves that require no lubrication. The PFA plug seated in the PTFE lined body bore provides positive, drop tight shutoff in a quarter turn operation. 3
E-Z Turn T-Line Valves Durco T-Line valves have significantly reduced torque which, in turn, has reduced stress on both piping and people. For nearly 30 years, Durco T-Line valves have been the most preferred PTFE lined valves in the CPI for obvious reasons: They don t leak They seldom need maintenance and never require seat replacement. Design and manufacturing improvements, plus a new gear operator, have made Durco T-Line valves very easy to operate. They are available in more sizes with extended pressure class and higher temperature limits. The T-Line has as much as ten times the sealing area as other lined valves and seals both up and downstream. Durco T-Line valves now provide a positive seal and E-Z Turn convenience. Design and manufacturing improvements, plus new gear operator, have made Durco T-Line valves very easy to operate. So, for leak-free, E-Z Turn performance in the toughest services, specify the best lined valve in the CPI...Durco T-Line valves. E-Z Turn is Available on in (25 mm) thru 8 in (200 mm) T-Line Valves /6 in (.6mm) 4
Durco T-Line Control Valves Choose from a complete line of Automax Valve Automation Equipment for precise proportioning and on-off control or we ll build a control package to your specification. V-Port T-Line valves are available in in (25 mm) through 3 in (80 mm) sizes with C v values of through 66. Standard Port T-Line valves are available in /2 in (5 mm) through 2 in (300 mm) sizes with C v values of 5.6 through 3200. Durco T-Line valves are readily adaptable for automatic operation because the torque is relatively constant and lubrication is not required. Additional information about T-Line control valves can be found in Bulletin V-9, Durco Control Valves. Flowserve s Automax Inc., a specialist in complete automation systems, markets a broad line of rack and pinion, heavy-duty, electric and linear actuators. In addition, a comprehensive line of engineered special control circuits, solenoid valves, limit switches, positioners and actuator mounting kits is offered. This expertise in the rapidly growing control valve market provides a complementary product line to the other automation products offered by Flowserve s Fluid Control Group. 00 90 80 % OF MAXIMUM C v 70 60 50 40 30 20 0 0 0 0 20 30 40 50 60 70 80 90 00 % OF VALVE OPENING Typical characteristic curve for V-Port T-Line. For actual data consult Durco control valve technical manual for valve and actuator sizing. 5
Technical Data in (25 mm) thru 4 in (00 mm) T-Line Valves 8 in (200 mm) T4-MAFS3-Mastergear in (25 mm) thru 6 in (50 mm) E-Z Turn T-Line Valves 0 in (250 mm) thru 2 in (50 mm) E SHUT B 2 in J (50.8 mm) 6 Tooth Spline OPEN F W E A H Z C F I G. T 4 E I F25 ISO Actuator Mounting Flange F B DURCO Y N X BRKT Rotated 90 for Clarity DN 0'' - 50 lbs DN 250 - PN 0 K F I G. T 4 E I DURCO 6 DN 0'' - 50 lbs DN 250 - PN 0 A Z
Technical Data Dimensions Drilling Drilling A B C E* F H J K L N N W W X Y Z M M Valve Class 50 Class 300 Class Class Class Offset High Size Size B.C. Size B.C. 50 300 50 300 50 300 50 300 50 300 50 300 50 300 Design Hub in No. in in No. in in in in in in in in in in in in in in in in in in in in in in in in in in in (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) /2 4 5 2 3 4 /4 3 /2 2 3 /32 7 /6 3 7 /6 /32 7 /6 5 5 /6 (5) (6) (60) (08) (89) (75) () (35) (.) (9) (78) (.5) (35) 3 /4 4 5 2 3 /4 4 5 3 7 3 3 /32 7 /6 /6 7 /6 /32 7 /6 5 7 /6 (20) (6) (70) (7) (98) (79) () (43) (.) (9) (78) (.5) (38) 4 5 3 4 3 /4 3 /2 5 6 /2 4 /4 4 7 4 7 /6 /6 2 /4 2 /32 3 /4 4 7 /32 4 7 /32 2 3 2 3 4 9 /6 4 9 /6 8 8 9 7 5 7 /32 6 /4 (25) (6) (79) (9) (89) (27) (65) (08) (24) (02) () (7) (57) (6.6) (9) (5) (5) (60) (60) (6) (6) (200) (200) (229) (8) (3.) (33) (59) /2 4 5 3 7 4 7 4 /2 6 /2 7 /2 5 6 4 /6 9 /6 3 /6 3 7 3 /6 5 5 /32 5 5 /32 2 3 2 3 4 9 /6 4 9 /6 8 8 2 7 6 7 /6 6 3 /6 (40) (6) (98) (22) (4) (65) (9) (27) (56) (9) (4) (2) (76) (22.2) (2) (3) (3) (60) (60) (6) (6) (200) (200) (305) (8) (3.) (63) (73) 2 4 3 /4 4 3 /4 8 3 /4 5 7 8 /2 6 6 /2 5 /2 5 7 3 3 /4 7 5 /6 5 3 /6 5 3 /6 2 3 2 3 4 9 /6 4 9 /6 8 8 20 7 7 7 /2 (50) (9) (2) (9) (27) (78) (26) (52) (65) (40) (6) (22) (95) (22.2) (24) (48) (48) (60) (60) (6) (6) (200) (200) (508) (8) (3.) (8) (90) 3 4 3 /4 6 8 7 6 5 8 7 /2 8 /4 6 /32 3 /4 5 7 5 /6 6 3 /4 6 3 /4 2 /6 2 /6 4 9 /6 4 9 /6 8 8 20 8 7 3 /32 8 /32 (80) (9) (52) (22) (70) (203) (283) (9) (20) (6) (9) (28) (27) (22.2) (24) (7) (7) (68) (68) (6) (6) (200) (200) (508) (206) (3.) (202) (22) 4 8 3 /4 7 /2 8 7 7 7 9 2 9 0 7 2 /32 5 /6 /4 6 /2 3 /32 3 8 7 8 7 3 7 /6 3 7 /6 2 2 30 8 3 /6 0 3 /6 (00) (9) (90) (22) (200) (229) (305) (229) (254) (94) (24) (32) (65) (35.7) (35) (226) (226) (87) (87) (283) (283) (305) (305) (762) (223) (3.) (259) 6 8 7 9 /2 2 7 0 5 0 /2 5 7 2 /2 9 23 /32 7 /6 8 3 3 /32 7 /6 0 3 /6 0 3 /6 3 7 /6 3 7 /6 2 2 8 3 /6 (50) (22) (24) (22) (270) (267) (403) (279) (38) (247) (25) (36) (23) (35.7) (36) (275) (275) (87) (87) (283) (283) (305) (305) (223) (3.) 8 8 7 3 /4 4 3 /2 3 5 /6 5 /32 0 5 Spline 7 /6 (200) (22) (298) (356) (343) (354) (29) (270) (36) (3.) 0 2 4 /4 3 6 7 3 2 7 /6 3 3 5 /6 2 7 24 9 3 /32 2 /6 /32 (250) (25) (362) (330) (406) (432) (34.5) (36) (76.) (00) (555) (60) (493) (53.5) (280.2) (3.) 2 2 7 4 9 7 7 3 5 3 4 7 /6 22 2 /32 24 9 3 /32 2 /6 7 (300) (25) (432) (356) (482) (454) (34.5) (38) (76.) (2) (575) (60) (493) (53.5) (30.8) (3.) Note:. All dimensions are approximate and for illustration purposes only. For exact dimensions request certified dimensional prints. 2. The two top holes on each flange on the 6 in (50 mm) and 8 in (200 mm) valves are drilled for studs. * E Dimension does not include PTFE raised face per ANSI B-6-5 Pressure-Temperature Rating PRESSURE PSI (kpa) 800 (556) 700 (4827) 600 (437) 500 (3448) 400 (2758) 300 (2069) 200 (379) 00 (690) T-43 T-4 Flow Characteristics Valve Size Area of % Port Opening Based Bare Valve Wt. in Port on ANSI F423-82 C v lbs (kg) (mm) in 2 (m 2 x 0-3 ) PTFE Lined Pipe I.D. 50# 300# /2 (5).50 (.097) 76 5.6 5 /4 (2.3) 3 /4 (20).306 (.97) 69 2 7 3 /4 (3.5) (25).785 (.506) 23 33.9 0 (4.5) 6 /2 (7.4) /2 (40).500 (.968) 97 95.4 4 /2 (6.5) 25 (.3) 2 (50) 2.550 (.645) 90 99 2 /2 (9.7) 27 /2 (2.4) 3 (80) 4.900 (3.6) 74 343 36 (6.3) 64 (29.0) 4 (00) 9.200 (5.936) 77 83 66 /4 (30) 35 (6.2) 6 (50) 8.050 (.646) 66 05 20 /4 (54) 200 (90.7) 8 (200) 32.700 (2.098) 67 424 20 (95.5) 0 (250) 36.8 (23.74) 49 259 345 (56.5) 2 (300) 45.6 (29.49) 42 3200 488 (22.4) -20 0 00 200 300 400 (-29)(-8) (38) (93) (49) (204) TEMPERATURE F ( C) Consult factory for vacuum rating. 7
T-4 Parts List 0 in (250 mm) Thru 2 in (300 mm) T-4 Item No. Description Material Req d. Body Ductile Iron/PFA 2 Plug Ductile Iron/PFA 3 Cap, Top Ductile Iron 3A Fasteners, Top Cap Carbon Steel 6 3B Fasteners, Top Cap Carbon Steel 2 6* Diaphragm* PTFE Collar, Thrust Durcomet 00 2 Adjuster Durcomet 00 2A Fasteners, Adjuster Carbon Steel 4 7 Spring, Ground 304 SS *Recommended spare parts Note: Body liners are not field replaceable. Grounding Spring (7) Fastener Adjuster (2A) Fastener -Top Cap (3A) Fastener -Top Cap (3B) Top Cap (3) Adjuster (2) Thrust Collar () Diaphragm (6) Design Changes In order to follow Flowserve s commitment to continuous improvement, we reserve the right to change product and performance specifications without notice. Plug (2) DURCO Body () 8
T-4 and T-43 Parts List /2 in (5mm) Thru 8 in (200 mm) T-4 Item No. Description Material Req d. Body Ductile Iron/PTFE** 2 Plug Ductile Iron/PFA 3 Cap, Top Ductile Iron 3A Fasteners, Top Cap Carbon Steel 4 6* Diaphragm* PTFE Collar, Thrust Durcomet 00 2 Adjuster Durcomet 00 2A Fasteners, Adjuster Carbon Steel 2 7 Spring, Ground 302 SS 9 Collar, Stop Cadmium Plated Carbon Steel 9A Retainer, Collar 302 SS 20 Hex Nuts, Top Cap Carbon Steel 4 2H T-43 Item No. Description Material Req d. Body Carbon Steel/PTFE 2 Plug Ductile Iron/PFA 3 Cap, Top Durcomet 00 3A Fasteners, Top Cap Carbon Steel 4 6* Diaphragm* PTFE Collar, Thrust Durcomet 00 2 Adjuster Durcomet 00 2A Fasteners, Adjuster Carbon Steel 2 7 Spring, Ground 302 SS 9 Collar, Stop Cadmium Plated Carbon Steel 9A Retainer, Collar 302 SS 20 Hex Nuts, Top Cap Carbon Steel 4 2H **Recommended spare parts ** /2 in (5 mm) and 3 /4 in (20 mm) DCI/PFA Note: Body liners are not field replaceable. Wrench (3) Stop Collar Retainer (9A) Stop Collar (9) Adjuster Fasteners (2A) Adjuster (2) Top Cap Fasteners (3A) Top Cap (3) Grounding Spring (7) Thrust Collar () Diaphragm (6) Top Cap Nuts (20) Plug (2) Body () New alloy options now available. Both the plug insert and body armor of the Class 50 and 300 models are available in D4/36SS and other alloys as well as standard DCI. Consult factory for details. Design Changes In order to follow Flowserve s commitment to continuous improvement, we reserve the right to change product and performance specifications without notice. 9
The world s oldest and largest manufacturer of PTFE lined valves No one valve is optimum for all service conditions, AKH3 in (25mm)-0 in (250mm) standard port ball valves which is why we offer many options in design and materials. As a result, you have the freedom to choose the best valve for your application. AKH2A in (25mm)-6 in (50mm) full port, short pattern ball valves BTV-200 2 in (50mm)-24 in (600mm) butterfly valves AKH2 /2 in (5mm)-2 in (300mm) AMP3L full port ball valves in (25mm)-3 in (75mm) multi-port 3-way valves T-4/43 /2 in (5mm)-2 in (300mm) plug valves Selection, Installation, Operation and Maintenance Although Flowserve can, and often does, provide general guidelines, it is obviously not possible to provide application specific data and warnings for all conceivable applications. The purchaser/end user must therefore assume the ultimate responsibility for the proper selection, installation, operation and maintenance of the products. Read the appropriate IOM available from Cookeville, TN 3850 before installing, operating or repairing any valve. The purchasers/end user should train its employees and/or contractors in the safe use of the Flowserve products in connection with the purchaser s manufacturing processes. Contact your trained Flowserve representative for the technical support to satisfy your valving needs. ASG in (25mm)-4 in (00mm) sight glass ASG in (25mm)-4 in (00mm) 3-way sight glass Flowserve Corporation Flow Control Division Cookeville, Tennessee 3850 93 432 402 ASF in (25mm)-4 in (00mm) strainers ARV/SG in (25mm)-4 in (00mm) check valve/sight glass Or Consult Your Local Stocking Distributor Flowserve Ahaus GmbH Von Braun Straße 9a D-48683 Ahaus, Germany +49 256 686-0 Flowserve Pte. Ltd. Singapore 638824 Republic of Singapore 65 862 3332 Printed in U.S.A. August 200 Flowserve Corporation