Technical Application LED Downlight LUZ-DL32-6-12WD LUZ-DL32-6-12WN
Introduction DL32 downlight retrofit kit adopts high lumen LM8 SMD led chip, with efficiency of 75-8 LPW. UL cul and Energy Star approved for North America. 4inch, 5inch and 6inch full sizes in E26 & GU24 adaptor for installation. Triac dim minimum to 8%. Compatible with Lutron dimmers Up to 7% energy saving compared to standard CFL Long lifetime of 36, hours Dimmable when using triac dimmer 9 wide beam angle CCT: 27K 3K 4K 5K No UV/IR light Environment friendly, without Mercury or any other hazardous substances Application notes IP2 for indoor use only Professional electrician for installation only Switch off before installation Do not touch when in use Keep away from hot steam and corrosive gas Application Areas It is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc. Certificate
Product Information Ø19mm 7.48'' Ø15mm 5.9'' 77.8mm 3.6'' Technical Specifications Model Voltage Power Power Factor Lumen (±5%) Beam angle CCT Lifespan CRI Dimmable Dimension LUZ-DL32-6-12WD AC12V 12W.9 87 1 o 27K 36h 8 Yes Ø19*77.8mm LUZ-DL32-6-12WD AC12V 12W.9 91 1 o 3K 36h 8 Yes Ø19*77.8mm LUZ-DL32-6-12WD AC12V 12W.9 18 1 o 4K 36h 8 Yes Ø19*77.8mm LUZ-DL32-6-12WD AC12V 12W.9 15 1 o 5K 36h 8 Yes Ø19*77.8mm LUZ-DL32-6-12WN AC1-277V 12W.9 88 1 o 27K 36h 8 No Ø19*77.8mm LUZ-DL32-6-12WN AC1-277V 12W.9 92 1 o 3K 36h 8 No Ø19*77.8mm LUZ-DL32-6-12WN AC1-277V 12W.9 11 1 o 4K 36h 8 No Ø19*77.8mm LUZ-DL32-6-12WN AC1-277V 12W.9 17 1 o 5K 36h 8 No Ø19*77.8mm Driver data Sheet Driver data DIM Non dim Input rated Voltage AC12V AC1-277V Frequency 6Hz 5/6Hz Input Voltage AC9-14V AC9-35V Efficiency 82% 85% Total load Wattage 12W±1W 12W±1W Power Factor.9.9 Rated input current.12a.14a Full load output Voltage DC24-38V DC24-38V Rated output current 35mA 35mA Output current range 35mA±5% 35mA±5% Power tolerance ±5% ±5% Current output tolerance ±5% ±5% Dimming range 8%-1% Dimmer Triac dimmers Short circuit protection PASS PASS Over voltage protection PASS PASS Over temperature protection PASS PASS Withstand voltage AC15V AC375V Fixture Compatibility Rated Wattage Electrical Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 12W Ⅱ IP2-2 o C~45 o C ~9% -2 o C~65 o C
Spectral Distribution 27K 3K.8 Max=6788 [1.=2] 1.13SDCM F27K.8 Max=5338 [1.=2] 3.5SDCM F3K.7.7.6.6.5.4.3 x=.3439 y=.3656.5.4.3 x=.4464 y=.449.2.2.1.1. 38 5 6 7 8. 38 5 6 7 8 4K 5K.8 Max=7171 [1.=2] 2.12SDCM F4K.8 Max=8694 [1.=2] 2.5SDCM F5K.7.7.6.6.5.4.3 x=.3841 y=.3816.5.4.3 x=.3473 y=.3564.2.2.1.1. 38 5 6 7 8. 38 5 6 7 8 Photometric Diagram 27K 3K -/+18-12 12-9 9 8 16 24 32 4-3 3 AVERAGE BEAM ANGLE(5%): 97.1 DEG MH=1m 4 C/18 C9/27 3.6 3.2 2.8 2.4 2 1.6 1.2.8.4-25 -2-15 -1-5 5 1 15 2 25 Flux out: 67.7 lm 3.281ft 13.58, 35.88fc 7.364ft 1m 146.2, 386.2lx 224.46cm 6.562ft 3.395, 8.972fc 14.73ft 2m 36.54, 96.56lx 448.92cm 9.843ft 1.59, 3.987fc 22.9ft 3m 16.24, 42.91lx 673.38cm 13.12ft.8487, 2.242fc 29.46ft 4m 9.135, 24.14lx 897.84cm 16.4ft.5432, 1.435fc 36.82ft 5m 5.846, 15.45lx 1122.3cm Height Eavg, Emax Angle: 96.6deg Diameter -/+18-12 12-9 9 1 2 3 4 5-3 3 AVERAGE BEAM ANGLE(5%): 97.4 DEG MH=1m 5 C/18 C9/27 4.5 4 3.5 3 2.5 2 1.5 1.5-25 -2-15 -1-5 5 1 15 2 25 Flux out: 79.3 lm 3.281ft 15.85, 41.87fc 7.389ft 1m 17.6, 45.7lx 225.21cm 6.562ft 3.963, 1.47fc 14.78ft 2m 42.65, 112.7lx 45.42cm 9.843ft 1.761, 4.652fc 22.17ft 3m 18.96, 5.7lx 675.63cm 13.12ft.997, 2.617fc 29.56ft 4m 1.66, 28.17lx 9.84cm 16.4ft.634, 1.676fc 36.94ft 5m 6.825, 18.3lx 1126.5cm Height Eavg, Emax Angle: 96.79deg Diameter 4K 5K Flux out: 698. lm Flux out: 651.8 lm -12-9 -/+18 12 9 4.5 4.5 3.6 MH=1m C/18 C9/27 3.281ft 15.6, 41.2fc 1m 167.9, 443.4lx 6.562ft 3.9, 1.3fc 2m 41.97, 11.9lx 7.393ft 225.33cm 14.79ft 45.66cm -12-9 -/+18 12 9 4.5 4.5 3.6 MH=1m C/18 C9/27 3.281ft 14.57, 38.44fc 1m 156.8, 413.7lx 6.562ft 3.641, 9.69fc 2m 39.2, 13.4lx 7.391ft 225.29cm 14.78ft 45.58cm 9 3.15 9 3.15 18 2.7 2.25 9.843ft 1.733, 4.577fc 3m 18.66, 49.27lx 22.18ft 675.99cm 18 2.7 2.25 9.843ft 1.618, 4.271fc 3m 17.42, 45.97lx 22.17ft 675.87cm 27 36 1.8 1.35 13.12ft.9749, 2.575fc 4m 1.49, 27.71lx 29.57ft 91.32cm 27 36 1.8 1.35 13.12ft.914, 2.42fc 4m 9.799, 25.86lx 29.57ft 91.16cm -3 45 3.9.45 16.4ft.6239, 1.668fc 5m 6.716, 17.74lx 36.96ft 1126.65cm -3 45 3.9.45 16.4ft.5826, 1.537fc 5m 6.271, 16.55lx 36.96ft 126.45cm AVERAGE BEAM ANGLE(5%): 97.6 DEG -25-2 -15-1 -5 5 1 15 2 25 Height Eavg, Emax Angle: 96.82deg Diameter AVERAGE BEAM ANGLE(5%): 97.3 DEG -25-2 -15-1 -5 5 1 15 2 25 Height Eavg, Emax Angle: 96.81deg Diameter
Polar Diagram Comparison -15 O +/-18 O 15 O -12 O 12 O -9 O 9 O 9 18-6 O 27 6 O 36-3 O 45 3 O O AVERAGE BEAM ANGLE (5%): 97.3DEG C/18, 97.3 deg C3/21, 97.3 deg C6/24, 97.3 deg C9/27, 97.4 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11%.4 Lifetime (hours) 8 7 6 5 4 3 2 1 65 o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15%.35 1%.3 95%.25 9%.2 85%.15 8% 75% FLUX.1.5 U'V' 7%. 1 2 3 4 5 6 7 8 9 1 LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C Temperature ( o C) 9 8 7 6 5 4 3 2 1 11:13:13 11:25:1 11:37:1 11:49:1 12:1:1 12:13:1 12:25:1 12:37:1 12:49:1 13:1:1 13:13:1 13:25:1 13:37:1 13:49:1 14:1:1 14:13:1 14:25:1 14:37:1 14:49:1 15:1:1 15:13:1 15:25:1 15:37:1 15:49:1 16:1:1 16:13:1 16:25:1 16:37:1 Time IC Capacitor MOS PCB LED Fitting Environmental temperature The driver lifespan is based on capacitor working temperature.
Installation Step1: Unscrew the wing nut inside the can to detach the socket bracket fron the can. Disengage the socket from the socket bracket. Step2: Thread the socket adapter into the socket. Step3: Plug the female connector of the retrofit trim onto the male connector of the socket adapter assembly. Step4: Squeeze both torsion spring arms together and insert into the torsion spring slots (or receiner brackets) of the can. Tuck all wires into the can and carefully push the retrofit trim into can (note: to provide enough room in shallow cans carefully position socket adapter and socket adjacent to the long side of the LED driver prior to inserting the retrofit tirm into the can. Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 49.5*4.5*41.8 18 2 CTNS Q'TY(PCS) VOLUME(CBM) 2'' standard container 335 67 28 4'' standard container 67 134 56 LUZON LIGHTING 1945 B STREET SUIATE A - SAN DIEGO - CA - 9212 619 878 273 / SALES@LUZONLIGHTING.COM WWW.LUZONLIGHTING.COM