Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL
Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167 m) Pumping Temperatures to ºF (288ºC) Working Pressures to 27 PSIG (1,896 kpa) Seven Sizes DL Series Pumps are excellent for high temperature chemical process applications. Features include a space saving design and a fully open impeller. Seven sizes are available in ductile iron and 316SS construction. The quality construction of the DL2/23 Series Pumps provides a pump with maximum service life that is simple to install and maintain. DL2/23 Series Pumps utilize a close-coupled design which eliminates the need for couplings. There are no shaft alignment problems often associated with coupled pumps. Shafts are furnished by the motor manufacturers to Dean s rigid specifications for materials, size and configuration to insure long, trouble-free operation. Shafts have a maximum end play of.6 thereby extending the life of the mechanical seal. Additional Features Include: Removable Backhead allows removal of the entire rotating assembly without removing the pump casing from the line. Low Shaft Deflection design provides a maximum of.2 inch shaft deflection at the face of the stuffing box, assuring maximum packing and seal life. Renewable Shaft Sleeve is a standard Dean Pump feature. Seal Face Flushing is provided for pumps furnished with mechanical seals. Dean Seal guards may be used. Positive Impeller Adjustment can be set on the impeller/backhead/motor before insertion into the casing. Stuffing Box Versatility provides for standard packing and a wide selection of mechanical seal types and materials. Choice of Materials includes ductile iron and 316 stainless steel. 2
Common Features DL2/23 Chemical duty design DL2 Available in two sizes Class 1 flat face flanges Close-coupled design eliminates alignment issues Space saving vertical design Ductile iron and 316SS construction available ANSI type fully open impeller ANSI type backhead 4 F (2 C) operating temperature without cooling F (288 C) maximum operating temperature with cooling Back pull-out design DL23 Available in five sizes Positive impeller adjustment Single and double seal arrangements available Oversized gland bolts 3
ALLOWABLE WORKING PRESSURE VS. PUMPING TEMPERATURE PUMPING TEMPERATURE DEGREES C. TOTAL HEAD-FEET 3 RPM 6 HERTZ WORKING PRESSURE PSIG 3 2 2 1 1 - MINIMUM TEMPERATURE LIMIT -2 DEGREES F. 316SS DUCTILE IRON 1 1 2 DL21/DL231 MAX. TEMP. 4 DEG. F. 2 DL22/DL232 MAX. DEG. F. -1 1 2 3 4 PUMPING TEMPERATURE DEGREES F. 3 8 6 4 2 6 2 18 16 14 12 1 WORKING PRESSURE KPa DL HEAD CAPACITY RANGE CHART WITH TWO POLE MOTOR CAPACITY U.S. GALLONS PER MINUTE 29 RPM HERTZ 1 2 3 4 6 4 3 2 1 1 1 / 2 1 X 1 X 6 /1 2 X 3 X 8 1 / 2 1 / 1 2 X 3 X 6 2 X 3 X 11 1 / 2 2 X 3 X 8 1 / 2 3 X 4 X 8 1 / 2 3 X 4 X 11 1 / 2 1 2 3 4 6 7 CAPACITY U.S. GALLONS PER MINUTE 3 RPM 6 HERTZ DL HEAD CAPACITY RANGE CHART WITH FOUR POLE MOTOR TOTAL HEAD-FEET 17 RPM 6 HERTZ CAPACITY U.S. GALLONS PER MINUTE 14 RPM HERTZ 1 2 3 1 1 1 1 / 2 1 X 1 X 6 /1 2 X 3 X 8 1 / 2 2 X 3 X 11 1 / 2 1 1 / 2 X 3 X 6 2 X 3 X 8 1 / 2 3 X 4 X 11 1 / 2 3 X 4 X 8 1 / 2 1 1 2 2 3 3 4 CAPACITY U.S. GALLONS PER MINUTE 17 RPM 6 HERTZ 8 6 4 2 4 3 2 1 1 TOTAL HEAD FEET 29 RPM HERTZ TOTAL HEAD FEET 14 RPM HERTZ 4
DL21 and DL231 standard inline model with plain casing back cover. DL21 Section No. 1934-1, DL231 Section No. 193-1 Direction of Rotation: Viewed From Motor End Horsepower Rating, Maximum: Rated Horsepower of Driver Not to Exceed @17 rpm @3 rpm MECHANICAL DESIGN SPECIFICATIONS DL2 7 1 /2 HP 1 HP Clockwise Casing Thickness, Minimum /16 Bearings Ball Type: Motor Lubrication Grease Flanges: ASME/ANSI Rating Ductile Iron (CI.22) 316SS (CI.) Facing Finish Impeller Maximum Suction Pressure For 2-Year Minimum Thrust Bearing Life Stuffing Box Jacket Pressure Hydrostatic Test Pressure: Ductile Iron (CI.22) 316SS (CI.) Stuffing Box Dimensions: Length (Depth) Inside Diameter (Bore Dia.) Shaft Sleeve Diameter Lantern Gland Width Distance: Lantern Gland To Open End of Stuffing Box Packing: Size (Square) Number of Rings With Lantern Gland Spacing Number of Rings Lantern Gland Omitted DL23 HP 1 HP CL.1 FF 12 Ra Single Plane Dynamic Balanced 2 1 /8 1 /8 1 7 /16 1 3 /8 /16 2-R-3 6 1 psig Maximum 12 psig 41 psig 2 3 /4 2 1 /2 1 3 /4 /8 1 3 /4 3 /8 2-R-3 Pumping Temperature ºF Pump Type Material Class Min. Max. DL21 and DL231 DL22 and DL232 MECHANICAL SEAL SPECIFICATIONS 22 or 22 or -2-2 7 +4 + All single mechanically sealed pumps contain a seal flushing connection in the gland and internal seal circulating piping. All single mechanically sealed DL22 and DL232 pumps used with cooling jackets require a Min-Flo Bushing. DL22 and DL232 standard inline model with jacketed casing back cover. DL22 Section No. 1934-3, DL232 Section No. 193-3 Part# Part Name Iron (Class 22) 316SS (Class ) 3 Impeller C.I. (1) 316SS (3) Casing D.I. (7) 316SS (3) D Casing Capscrew Steel (8) 7 Cradle Spacer C.I. (1) 7G Cradle Spacer Capscrew Steel (9) 1 Shaft Sleeve 316SS (6) 1K STANDARD MATERIALS OF CONSTRUCTION Shaft Sleeve Key (DL 23 Series only) 34SS 13 Stuffing Box Gland Steel (4) 316SS (3) 14 Stuffing Box Gland Stud 34SS () 14A External Seal Flush Plug Steel (2) 316SS (6) 1 Stuffing Box Gland Stud Nut 34SS () 17 Lantern Ring Teflon 18 Splash Collar 18-8 Stainless Steel 22 Casing Back Cover D.I. (7)* 316SS (3) 22A Back Cover Capscrew Steel (9) 37 Clearance Shim Steel 6 Base (Optional) C.I. (1) 77 Casing Gasket Teflon 77A Impeller Gasket Teflon 9A Stationary Seal Element Optional See Seal Data 9B Rotating Seal Face Optional See Seal Data Trademark of E.I dupont de Nemours & Co. * DL 22 & DL 232: jacketed backhead is Cast Steel A.S.T.M. A216 Grade WCB DL23 pumps with motor frames 182TC and 184TC will have a Cast Iron (1) Splash Collar > Material Specifications * (1) Cast Iron (2) A.I.S.I 12 (3) A.S.T.M. A 744 Grade CF-8M (4) Cast Steel A.S.T.M. A216 Grade WCB *Specifications subject to change without notice. Electric Motor Specifications Standard motors are vertical, solid shaft, normal thrust, C base, 23/46 volts, 3 phase, 6 cycle, Class B insulation, NEMA Design B, for 4ºC maximum ambient temperature. The motor shaft is steel. The bearings are regreasable. Stocked explosion proof motors are Dual label, Class I Group D and Class II Groups F&G, with T-3B temperature code and a 1. service factor. > > () A.I.S.I 34SS (6) A.I.S.I. 316SS (7) Ductile Iron-A.S.T.M. A 39 (8) A.S.T.M. A449 Type 1 (9) A.S.T.M. A37
Dimensions FRAME P (MAX) CP (MAX) AB (MAX) 143TC 9. 21.2 9.2 14TC 9. 22.2 9.2 182TC 1. 26.2 1.7 184TC 1. 26.2 1.7 213TC 12.7 3. 11.37 21TC 12.7 3. 11.37 24TC 14. 32.2 12. 26TC 14. 32.2 12. FRAME P (MAX) CP (MAX) AB (MAX) 284TC 16.2 34. 14. 286TC 16.2 34. 14. 324TC 17.7 36.2 17. 326TC 17.7 36.2 17. 364TC 2. 42.2 18. 36TC 2. 42.2 18. 4TC 22. 44.2 19. SUCTION PUMP SIZE SIZE OD BC BOLTS THK SIZE OD BC BOLTS THK HA HD HE HF X Y 1 X 1 1 /2 X 6 1.. 3.88 4-1 /2.688 1. 4.2 3.13 4-1 /2.63 11. 2.38 3. 6. 12. 6. All dimensions are in inches. IMPORTANT: Do not use for construction unless certified. DISCHARGE 1 1 /2 X 3 X 6 3. 7. 6. 4 - /8.938 1.. 3.88 4-1 /2.688 11. 2.88 3. 6. 14. 8. 1 1 /2 X 3 X 8 1 /2 3. 7. 6. 4 - /8.938 1.. 3.88 4-1 /2.688 13. 4. 4.13 7. 18. 1. 2X 3 X 8 1 /2 3. 7. 6. 4 - /8.938 2. 6. 4.7 4 - /8.7 13. 4. 4.13 7. 2. 11. 3X 4 X 8 1 /2 4. 9. 7. 8 - /8 1. 3. 7. 6. 4 - /8.938 13.. 4.13 7. 24. 13. 2X 3 X 11 1 /2 3. 7. 6. 4 - /8.938 2. 6. 4.7 4 - /8.7 17. 4.. 1. 22. 12. 3X 4 X 11 1 /2 4. 9. 7. 8 - /8 1. 3. 7. 6. 4 - /8.938 17..7. 1. 2. 14. Dean Pump Division 64 Guion Road Indianapolis, IN 4624 Phone: (317) 293-293 TOLL FREE: (8) 81-926 FAX: (317) 297-728 E-Mail: info@deanpump.com Web Site: www.deanpump.com COPYRIGHT 2 MET-PRO CORPORATION, DEAN PUMP DIVISION Dean Pump IS A REGISTERED TRADEMARK OF MET-PRO CORPORATION 9-932 1