Series 1700 1.8
Series 1700 1.9
Series 1700 Air Service Units Filter 17v01c.s.t 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" Filter pore size A = 5 s B = 20 C = 50 TYPE P = Bowl protection t S = Automatic drain PS = Bowl protection and Automatic drain Example: 17101A.B.P Filter size 1 with G 1/8" connections, filter pore size 20 and bowl protection with technopolymer body. - Double filtering action: by air centrifuging and by replaceable and reusable HDPE porous filter element. - Zinc alloy body or reinforced technopolymer body with threaded aluminium insert connections. - Wall mounting possibility with screws protected by covers. - Transparent technopolymer bowl screwed to the body. - Shock resistant bowl technopolymer protection. - Manual and semi-automatic water drain valve; in the semi-automatic version the drainage happens when there is no pressure or by pushing the valve up-wards. - Possibility to see the water level on 60 also with bowl protection assembled. - Automatic water drainage bowl available on request. Filter Serie Size Air Service 1_GB 1700 Units - Filter s 1 bar - 1, MPa Weight with technopolymer body gr. 10 Weight with zinc alloy body gr. 218 Filter pore size 5-20 - 50 Bowl capacity 20 cm Vertical on zinc alloy body 0 Nm on technopolymer body.10
Air Service Units Coalescing filter Series 1700 17v08c.e.t 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" FILTER EFFICIENCY e E = 99,97% TYPE P = Bowl protection t S = Automatic drain PS = Bowl protection and Automatic drain Example: 17108A.E.P Filter size 1 with G 1/8" connections. Filter efficiency 99,97% and bowl protection with technopolymer body. - Coalescing filter element remove 0,1 particle equivalent to 99,97%. - Zinc alloy body or reinforced technopolymer body with threaded aluminium insert connections. - Wall mounting possibility with screws protected by covers. - Transparent technopolymer bowl screwed to the body. - Shock resistant bowl technopolymer protection. - Manual and semi-automatic water drain valve; in the semi-automatic version the drainage happens when there is no pressure or by pushing the valve up-wards. - Possibility to see the water level on 60 also with bowl protection assembled. - Automatic water drainage bowl available on request. Coalescing Serie Size Air Service 1_GB 1700 Units filter - Coalescing filter s 1 bar - 1, MPa Weight with technopolymer body gr. 110 Weight with zinc alloy body gr. 225 Filter efficiency with 0,1 particle 0,9997 Bowl capacity 20 cm Vertical on zinc alloy body 0 Nm on technopolymer body.11
Series 1700 Air Service Units Panel mounting pressure reguletor 17109c.g.t c CONNECTIONS A = G 1/8" B = G 1/4" ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar TYPE L = no Relieving SM = improved relieving SR = Unbalanced valve t SRM = Unbalanced valve with improved relieving SMF = Improved relieving with controlled refiel Example: 17109A.C Panel mounting pressure regulator size 1 with G 1/8" connections, 0-8 bar adjusting range with relieving. Adjustment characteristics - Diaphragm pressure regulator with relieving. - Balanced poppet. - Technopolymer body with aluminum reinforced threaded connections. - Handle lockable in the desired position by simply pressing it downwards. - Two pressure gauge connections with plug complete of seal. - Panel mounting bracket. Panel Serie Size Air Service 1_GB 1700 mounting Units pressure - Panel mounting reguletor pressure reguletor s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight gr. 110 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Any.12
Air Service Units Panel mounting pressure regulator including manometer Series 1700 17129c.g c CONNECTIONS A = G 1/8" B = G 1/4" ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar Example: 17129A.C Panel mounting pressure regulator size 1 with G 1/8" connections, 0-8 bar. Adjustment characteristics - Diaphragm pressure regulator with relieving. - Balanced poppet. - Technopolymer body with aluminum reinforced threaded connections. - Handle lockable in the desired position by simply pressing it downwards. - Including manometer in the handle upper surface. - Panel mounting bracket. Panel Serie Size Air Service 1_GB 1700 mounting Units pressure - Panel mounting regulator pressure including regulator manometer including manometer s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight gr. 250 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Any.1
Series 1700 Air Service Units Modular pressure regulator 17v02c.g.t 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar t TYPE L = no Relieving SM = improved relieving Example: 17102A.C Pressure regulator size 1 with G 1/8" connections and 0-8 bar adjusting range with relieving with technopolymer body. Adjustment characteristics - Diaphragm pressure regulator with relieving. - Balanced poppet. - Zinc alloy body or reinforced technopolymer body with threaded aluminium insert connections. - Wall mounting possibility with screws protected by covers. - Handle lockable in the desired position by simply pressing it downwards. - Two pressure gauge connections with plug complete of seal. - Panel mounting bracket. Modular Serie Size Air Service 1_GB 1700 pressure Units - regulator Modular pressure regulator s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight with technopolymer body gr. 15 Weight with zinc alloy body gr. 250 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Any on zinc alloy body 25 Nm on technopolymer body.14
Air Service Units Modular pressure regulator including manometer Series 1700 17v22c.g 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar Example: 17022A.C Pressure regulator size 1 with G 1/8" connections and 0-8 bar adjusting range with relieving with Zinc alloy body. Adjustment characteristics - Diaphragm pressure regulator with relieving. - Pressure gauge included on the top of adjusting knob. - Balanced poppet. - Zinc alloy body or reinforced technopolymer body with threaded aluminium insert connections. - Wall mounting possibility with screws protected by covers. - Lockable handle by simply pressing it downwards in the desired position. - Panel mounting bracket. Modular Serie Size Air Service 1_GB 1700 pressure Units - regulator Modular pressure including regulator manometer including manometer s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight with technopolymer body gr. 250 Weight with zinc alloy body gr. 80 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Any on zinc alloy body 25 Nm on technopolymer body.15
Series 1700 Air Service Units Manifold pressure regulators 170t2c.g TYPE B = Standard regulator t M = Manifold press. reg. c/w manometer c CONNECTIONS A = G 1/8" B = G 1/4" ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar Example: 170B2A.C Standard manifold pressure regulator with connections G1/8" and adjusting range 0-8 bar. Adjustment characteristics - Pneumax modular regulators have a common inlet for the whole manifold joined by a bayonet system. - Alternatively to standard version it is also possible to use regulators with manometer included. - This solution allows space savings on machine and avoids further pneumatic connections among regulators and manometers. Manifold Serie Size Air Service 1_GB 1700 pressure Units - regulators Manifold pressure regulators s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight w/out manometer gr. 25 Weight with manometer gr. 80 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Any 25 Nm.16
Air Service Units Manifold pressure regulators Series 1700 17Bt2c.n.g t TYPE B = Standard regulator M = vers. manometer included c CONNECTIONS A = G 1/8" B = G 1/4" POSITIONS N. 2 = 2 regulators = regulators n 4 = 4 regulators 5 = 5 regulators 6 = 6 regulators ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar Note: a special kit between pressure regulators is necessary for manifold mounting. Therefore regulators and kits must be ordered in same quantity less one kit. Code 170M6, see next page. Adjustment characteristics - Pneumax modular regulators have a common inlet for the whole manifold joined by a bayonet system. - Alternatively to standard version it is also possible to use regulators with manometer included. - This solution allows space savings on machine and avoids further pneumatic connections among regulators and manometers. Air Manifold Service pressure Units regulators s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight w/out manometer gr. 25 Weight with manometer gr. 80 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Any 25 Nm.17
Series 1700 Air Service Units Lubrifcator 17v0c.t 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" t TYPE P = Bowl protection Example: 1710A.P Lubricator size 1 with G 1/8" connections and bowl protection with technopolymer body. - Fog type lubrication with variable section orifice according to the flow. - Zinc alloy body or reinforced technopolymer body with threaded aluminum insert connections. - Wall mounting possibility with screws protected by covers. - Transparent technopolymer bowl screwed to the body. - Technopolymer shock resistant bowl protection. - Possibility to see the min. and max. oil level on 60 also with bowl protection assembled. - Transparent technopolymer sight dome with adjusting handle. - Oil filling plug. Lubrifcator Serie Size Air Service 1_GB 1700 Units - Lubrifcator s 1 bar - 1, MPa Weight with technopolymer body gr. 108 Weight with zinc alloy body gr. 258 Indicative oil drip rate 1 drop every 00/600 Nl Oil type FD22 - HG2 Bowl capacity 6 cm Vertical on zinc alloy body 0 Nm on technopolymer body Min. operational flow at 6, bar 10 Nl/min..18
Air Service Units Filter pressure regulator Series 1700 17v04c.s.g.t.o 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" Filter pore size A = 5 s B = 20 C = 50 ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar TYPE P = Bowl protection t S = Automatic drain PS = Bowl protection e Automatic drain o OPTION O = Lockable version Example: 17104A.B.C.P Filter - pressure regulator size 1 with G 1/8î connections, filter pore 20 adjusting range 0-8 bar and bowl protection with technopolymer body. Adjustment characteristics - Filter - diaphragm pressure regulator with relieving. - Balanced poppet. - Double filtering action: by air centrifuging and by replaceable and reusable HDPE porous filter element. - Zinc alloy body or reinforced tecnopolymer body with threaded aluminium insert connections. - Wall mounting possibility with screws protected by covers. - Handle lockable in the desired position by simply pressing it downwards. - Transparent technopolymer bowl screwed to the body. - Technopolymer shock resistant bowl protection. - Manual and semi-automatic water drain valve; in the semi-automatic version the drainage happens when there is no pressure or by pushing the valve up-wards. - Possibility to see the water level on 60 also with bowl protection assembled. - Two pressure gauge connections with plug complete of seal. - Panel mounting bracket. - Automatic water drainage bowl available on request. Filter Serie Size Air Service 1_GB pressure 1700 Units regulator - Filter pressure regulator s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight with technopolymer body gr. 180 Weight with zinc alloy body gr. 295 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Filter pore size 5-20 - 50 Bowl capacity 20 cm Vertical on zinc alloy body 0 Nm on technopolymer body.19
Series 1700 Air Service Units Progressive start-up valve t 171t TYPE 10.M2 = Electric control complete wih M2 mechanic (see pag. 2.1) 20 = with pneumatic control - way valve with double poppet. - Possibility to adjust the down stream circuit filling time by the enclosed adjustable metering screw. - Quick down stream circuit discharge. - Possibility for a pneumatic or electric piloting control. - Body made with anodized 2011 aluminum alloy. - Wall mounting possibility with screws. Progressive Serie Size Air Service 1_GB 1700 Units start-up - Progressive valve start-up valve s 10 bar - 1 MPa Weight gr. 65 Any Min. operating pressure 2,5 bar - 0,25 MPa Nominal flow at 6 bar with p=1 1000 Nl/min. Flow with adjustable metering screw fully open 150 Nl/min..20
Air Service Units Shut-off valve Series 1700 17v0.t 0 = Zinc alloy body 1 = Technopolymer body t TYPE A = Not lockable handle B = Lockable handle - ways poppet valve. - Zinc alloy body or reinforced technopolymer body with threaded aluminium insert connections. - Double handle action for valve opening: pushing and rotating (clockwise). - Simply rotate the valve handle counter clockwise for valve closing and down stream circuit discharging. - Possibility to lock the valve in the discharging position by fitting in a padlock in the proper seat. - Technopolymer body with metal reinforced threaded connections. Shut-off Serie Size Air Service 1_GB 1700 valve Units - Shut-off valve s 10 bar - 1, MPa Weight with technopolymer body gr. 155 Weight with zinc alloy body gr. 280 Any Handle opening and closing angle 90 on zinc alloy body 0 Nm on technopolymer body.21
Series 1700 Air Service Units Shut-off valve 17v0.t 0 = Zinc alloy body 1 = Technopolymer body TYPE M2 = Electric with M2 t M2/9 = Electric with M2/9 - ways poppet valve, electric control. - Zinc alloy body or reinforced technopolymer body with threaded aluminium insert connections. - Technopolymer body with metal reinforced threaded connections. Air Shut-off Service valve Units s Max. working pressure 10 bar - 1, MPa Min. working pressure 2 bar Max. ambient temperature (at 10 bar) -5 C - 50 C Weight with technopolymer body gr. 215 Weight with zinc alloy body gr. 45 Any on zinc alloy body 0 Nm on technopolymer body.22
Air Service Units Shut-off valve Series 1700 17v0.t 0 = Zinc alloy body 1 = Technopolymer body t TYPE PN = with pneumatic control - ways poppet valve, pneumatic pilot. - Zinc alloy body or reinforced technopolymer body with threaded aluminium insert connections. - Technopolymer body with metal reinforced threaded connections. Air Shut-off Service valve Units s Connections G 1/8" Max. working pressure 10 bar - 1, MPa Min. working pressure 0 bar Max. ambient temperature (at 10 bar) -5 C - 50 C Weight with technopolymer body gr. 180 Weight with zinc alloy body gr. 10 Any on zinc alloy body 0 Nm on technopolymer body.2
Series 1700 Air Service Units Filter pressure regulator + Lubricator 17v06c.s.g.t 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" Filter pore size A = 5 s B = 20 C = 50 ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar TYPE P = Bowl protection t S = Automatic drain PS = Bowl protection and Automatic drain Example: 17106A.B.C.P Service unit combination complete with filter - pressure regulator and lubricator size 1 G 1/8î connections, filter pore size 20, adjusting range 0-8 bar and bowl protections with technopolymer body. Adjustment characteristics - Filter - diaphragm pressure regulator with relieving. - Balanced poppet. - Double filtering action: by air centrifuging and by replaceable and reusable HDPE porous filter element. - Zinc alloy body reinforced technopolymer body with threaded aluminum insert connections - Wall mounting possibility with screws protected by covers. - Lockable handle by simply pressing it downwards in the desired position. - Transparent technopolymer bowls screwed to the body. - Shock resistant bowl technopolymer protections. - Manual and semi-automatic water drain valve; in the semi-automatic version the drainage happens when there is no pressure or by pushing the valve up-wards. - Possibility to see the water level on 60 also with bowl protection assembled. - Two pressure gauge connections with plug complete of seal. - Panel mounting bracket. - Automatic water drainage bowl available on request. - Fog type lubrication with variable section orifice according to the flow. - Possibility to see the min. and max. oil level on 60 also with bowl protection assembled. - Transparent technopolymer sight dome with adjusting handle. - Oil filling plug. Filter Serie Size Air Service 1_GB pressure 1700 Units regulator - Filter pressure + Lubricator regulator + Lubricator s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight with technopolymer body gr. 295 Weight with zinc alloy body gr. 560 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Filter pore size 5-20 - 50 Bowl capacity 20 cm Indicative oil drip rate 1 drop every 00/600 Nl Oil type FD22 - HG2 Bowl capacity 6 cm Vertical on zinc alloy body 0 Nm on technopolymer body Min. operational flow at 6, bar 10 Nl/min..24
Air Service Units Filter + Pressure regulator + Lubricator Series 1700 17v07c.s.g.t 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" Filter pore size A = 5 s B = 20 C = 50 ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar TYPE P = Bowl protection t S = Automatic drain PS = Bowl protection and Automatic drain Example: 17107A.B.C.P Service unit combination complete with filter - pressure regulator and lubricator size 1 G 1/8î connections, filter pore size 20, adjusting range 0-8 bar and bowl protections with technopolymer body. Adjustment characteristics - Zinc alloy body or reinforced technopolymer body with threaded aluminum insert connections. - Wall mounting possibility with screws protected by covers. - Transparent technopolymer bowls screwed to the body. - Shock resistant bowl technopolymer protections. - Double filtering action: by air centrifuging and by replaceable and reusable HDPE porous filter element. - Manual and semi-automatic water drain valve; in the semi-automatic version the drainage happens when there is no pressure or by pushing the valve up-wards. - Possibility to see the water level on 60 also with bowl protection assembled. - Diaphragm pressure regulator with relieving and balanced poppet. - Pressure adjusting lockable handle by simply pressing it downwards in the desired position. - Two pressure gauge connections with plug complete of seal. - Panel mounting bracket. - Automatic water drainage bowl available on request. - Fog type lubrication with variable section orifice according to the flow. - Possibility to see the min. and max. oil level on 60 also with bowl protection assembled. - Transparent technopolymer sight dome with adjusting handle. - Oil filling plug. Filter Serie Size Air Service 1_GB + 1700 Pressure Units regulator - Filter + Pressure + Lubricator regulator + Lubricator s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight with technopolymer body gr. 75 Weight with zinc alloy body gr. 755 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Filter pore size 5-20 - 50 Bowl capacity 20 cm Indicative oil drip rate 1 drop every 00/600 Nl Oil type FD22 - HG2 Bowl capacity 6 cm Vertical on zinc alloy body 0 Nm on technopolymer body Min. operational flow at 6, bar 10 Nl/min..25
Series 1700 Air Service Units High sensitive air pressure regulator with high flow rate relieving g 17112B.g ADJUSTING RANGE A = 0,1-2 bar B = 0,1-4 bar C = 0,1-7 bar Example: 17112B.C Pressure regulator with G 1/4" 0,1-7 bar Adjustment characteristics - Accurate capacity to maintain set pressure. - Sensitivity combined with high relieving rates. - High flow rate with extremely low pressure drop. - Pressure adjusting lockable handle by simply pressing it donwards in the desired position. - Body made with anodized zoll aluminium alloy - Two pressure gauge connections with plug complete of seal. - Ring nut for panel mounting. - Once set, a constant bleed of air maintains the accuracy of the regulator. - This controlled release is a charasteric, not a fault. High Serie Size Air Service 1_GB sensitive 1700 Units air - pressure High sensitive regulator air pressure with high regulator flow rate relieving with high flow rate relieving s Connections G 1/4" 10 bar - 1 MPa Pressure gauge connections G 1/8" Weight gr. 50 Pressure range 0,1-2 bar / 0,1-4 bar 0,1-7 bar Any Air flow (inlet pressure 10 bar) 5 Nl/min 20m filtered air and Fluid preferably non lubricated.26
Air Service Units Accessories - Pressure Switch complete with adapter Series 1700 t 17t TYPE 14A = Pressure switch adapter 14B = Pressure switch 14C = Pressure switch complete Example: 1714C Pressure switch complete with adapter. Connection - The pressure switch complete with adapter has to be assembled between two elements of the FRL group. It cannot be utilized separately or at the end of the FRL group. - The pressure switch can be set at desired pressure (pressure range from 2 to 10 bar) by rotating the adjusting screw. - The electrical connection is made by mean of a 15 mm connector DIN 4650 type C. - The microswitch contact could be normally closed or open (change over switch). Accessories Serie Size Air Service 1_GB 1700 Units - Pressure - Accessories Switch complete - Pressure with Switch adapter complete with adapter s 1 bar - 1, MPa Weight gr. 160 Microswitch capacity 1A Microswitch Maximum voltage 250 VAC Grade of protection (with connector assembled) IP 65 Adjusting range 2-10 bar Any.27
Series 1700 Air Intake Air Service Units Accessories Air Intake - "H" profile Accessories Serie Size Air Intake Service 1_GB 1700- "H" Units profile - Accessories 17140 Weight gr. 75 17140H Weight gr. 50 Fixing bracket Fixing bracket Air Accessories Fixing Service bracket Units 17150 Weight gr. 2 170M5 Weight gr. 20 Assembling kit Assembling kit for manifold regulators 1716v 170M6 0 = Standard 5 = for progressive start-up val- Weight gr. 15 Weight gr. 20 Air Accessories Assembling Service Units kit for manifold regulators Pressure gauge 17070v.s A = Dial ø40 B = Dial ø50 SCALE A = Scale 0-4 bar s B = Scale 0-6 bar C = Scale 0-12 bar Air Accessories Pressure Service gauge Units.28
Air Service Units Spare parts Series 1700 Filter Pos. Codice Descrizione 1 RS/1701/10 Front tab 2 RS/1701/11 Rear tab RS/OR 2125 Seal 4 RS/1701/1 RS/1701/52 RS/1701/5 Porous filter element 20 Porous filter element 5 Porous filter element 50 5 RS/1701/7 Bowl protection 6 RK1701A/01 Filter bowl c/w drain valve 7 RK1701A/018 Filter bowl c/w automatic drain A RK1701A/014 RK1701A/021 RK1701A/022 Filter group assembly 20 Filter group assembly 5 Filter group assembly 50 Spare Serie Size Air Filter Service 1_GB 1700 partsunits - Spare parts Coalescing filter Pos. Codice Descrizione 1 RS/1701/9 Front tab 2 RS/1701/94 Rear tab RS/OR 2125 Seal 4 RK1701A/027 Coalescent group 0.1 5 RS/1701/7 Bowl protection 6 RK1701A/01 Filter bowl c/w drain valve 7 RK1701A/018 Filter bowl c/w automatic drain Air Spare Coalescing Service partsunits filter.29
Series 1700 Air Service Units Spare parts Panel mounting pressure regulator Pos. Codice Descrizione 1 RS/1701/12 Lock nut 2 RS/1701/ Adjusting knob RS/1701/2 Adjusting support 4 RK1701A/016 Adjusting screw assembly 5 6 RS/1701/0 RS/1701/29 RS/1701/28 RS/1701/1 RK1701A/012 RK1701A/024 Spring 0-2 bar range Spring 0-4 bar range Spring 0-8 bar range Spring 0-12 bar range Diaphragm assembly Diaphragm assembly w/o relieving 7 RK1701A/02 Nozzle c/w poppet 8 RK1701A/020 Plug c/w seal G1/8 Air Spare Panel Service mounting partsunitspressure regulator Modular pressure regulator Pos. Codice Descrizione 1 RS/1701/12 Lock nut 2 RS/1701/ Adjusting knob RS/1701/2 Adjusting support 4 RK1701A/016 Adjusting screw assembly 5 6 RS/1701/0 RS/1701/29 RS/1701/28 RS/1701/1 RK1701A/012 RK1701A/024 7 RS/1701/11 Rear tab Spring 0-2 bar range Spring 0-4 bar range Spring 0-8 bar range Spring 0-12 bar range Diaphragm assembly Diaphragm assembly w/o relieving 8 RK1701A/020 Plug c/w seal G1/8 9 RS/1701/10 Front tab 10 RK1701A/025 Poppet c/w spring 11 RS/OR 2125 Seal 12 RS/1701/2 Plug Air Spare Modular Service parts pressure Units regulator.0
Air Service Units Spare parts Series 1700 Lubricator Pos. Codice Descrizione 1 RK1701A/026 Lubricator sight dome assembly 2 RS/OR 5x1,5 RS/OR 2075 Seal 4 RS/1701/4 Venturi diaphragm 5 RS/1701/11 Rear tab 6 RS/1701/10 Front tab 7 RS/OR 2125 Seal 8 RS/1701/7 Bowl protection 9 RS/1701/41 Lubricator bowl 10 RS/1701/47 Oil tube Air Spare Lubricator Service partsunits Filter-pressure regulator Pos. Codice Descrizione 1 RS/1701/12 Lock nut 2 RS/1701/ Adjusting knob RS/1701/2 Adjusting support 4 RK1701A/016 Adjusting screw assembly 5 6 RS/1701/0 RS/1701/29 RS/1701/28 RS/1701/1 RK1701A/012 RK1701A/024 7 RS/1701/11 Rear tab Spring 0-2 bar range Spring 0-4 bar range Spring 0-8 bar range Spring 0-12 bar range Diaphragm assembly Diaphragm assembly w/o rel. 8 RK1701A/020 Plug c/w seal G1/8 9 RS/1701/10 Front tab 10 RK1701A/025 Poppet c/w spring and seal 11 RS/OR 2125 Seal 12 RS/1701/1 RS/1701/52 RS/1701/5 Porous filter element 20 Porous filter element 5 Porous filter element 50 1 RS/1701/7 Bowl protection 14 RK1701A/01 Filter bowl c/w drain valve 15 RK1701A/018 Filter bowl c/w automatic drain A RK1701A/014 RK1701A/021 RK1701A/022 Filter group assembly 20 Filter group assembly 5 Filter group assembly 50 Air Spare Filter-pressure Service partsunits regulator.1