CEMENT MIXERS & MACHINERY USER & WARRANTY GUIDE. Electric and Petrol models

Similar documents
CEMENT MIXERS & MACHINERY USER & WARRANTY GUIDE. Electric and Petrol Models

OWNER S OPERATING MANUAL

OWNER S OPERATING MANUAL

OWNER S OPERATING MANUAL

VERSION 2017 V.1.0

SIP Direct Drive Oil-Lube Air Compressors - Operating & Maintenance Instructions

Sawhorse with Chainsaw Holder

ORIGINAL INSTRUCTIONS

12V 160A/24V 185A MANUAL WORKSHOP BATTERY CHARGER

CONGRATULATIONS ON YOUR PURCHASE OF YOUR THUNDER BATTERY CHARGER! For your personal safety read, understand and follow the information provided in

Gun 300 Handpiece INSTRUCTION MANUAL. Ph: (02) Refer to instruction book before use.

WARRANTY. Illustration

4. TECHNICAL SPECIFICATIONS

WARRANTY. Illustration

WHAT S IN THE BOX METAL CUTTING SHEARS. Metal Cutting Shears 500W INSTRUCTION MANUAL SPECIFICATIONS. Hex Key. Max. Thickness: ozito.com.

2 PCE HYDRAULIC VEHICLE POSITIONING JACKS

Air-Operated Waste Oil Drainer

2-Pack Indoor/Outdoor Simulated Security Cameras. Owner s Manual

60 Watt Industrial LED Low Bay Light

Electric Chainsaw Sharpener With Bar Mount

50 Ft. Retractable Cord Reel

HEAVY DUTY WHEEL LIFTER

Instruction Manual. Instruction Manual LIFETIME PLU Manufactured and packaged for SRGS PTY LTD ABN CONDITIONAL

STRUT SPRING COMPRESSOR

GBC Polar A4 & A3 Laminators. Instruction Manual

2-Pack Indoor Simulated Dome Security Cameras

RPS1215 ORIGINAL INSTRUCTIONS. Cordless Pruner

12/24 VOLT AUTOMATIC SOLAR CHARGE CONTROLLER

Power Paint Scraper 200W CPS-200. To view the full range visit: Instruction Manual 3 Year Replacement Warranty

POLYCRYSTALLINE SOLAR PANELS. (MC4 Series) P/No SPP80-MC4, SPP120-MC4, SPP135-MC4, SPP150-MC4

HYDRAULIC TROLLEY JACK K Distributed by Kincrome Tools and Equipment:

OPERATOR'S MANUAL. Cat. No. C12 PC. To reduce the risk of injury, user must read and understand operator's manual.

ELECTRIC ENGRAVER 15W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS WHAT S IN THE BOX. ozito.com.au. Electric Engraver

12/24V 30A AUTOMATIC/MANUAL WORKSHOP BATTERY CHARGER

1000 lb. Adjustable Gantry Crane

500kg HYDRAULIC TABLE LIFT

OWNER S OPERATING MANUAL

Heavy-Duty Drywall Dolly Cart

VEHICLE SUPPORT STANDS K Distributed by Kincrome Tools & Equipment.

TBE-700. Operation, Safety and Maintenance Manual. Stainless Steel Weld Cleaning System. Ensitech Pty Ltd

Heavy-Duty Welding Fabrication Table

Power Carver 50W CPC-050. To view the full range visit: Instruction Manual 3 Year Replacement Warranty

2000-lb Hand Winch Truck Crane

SPECIFICATIONS MODEL NO. OZBG150WA

JUMP STARTER OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: JSM350 PART NO: ORIGINAL INSTRUCTIONS LS1117-ISS 1

18V CORDLESS STAPLER/NAILER

MULTI FUNCTION POWER PAK PLUS

3-Pt. Quick Hitch. Owner s Manual

Manual Chain Hoist. Owner s Manual

2000 lb Adjustable Gantry Crane

4 in 1 POWER STATION Model: 7226

Angle Grinder Holder

OFF-ROAD JACK SKU: HCRG-JACK48

160W Monocrystalline Folding Solar Panel USER MANUAL PLEASE READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE USE.

RECHARGEABLE PORTABLE EVAPORATIVE COOLER

Application/Equipment Rated Watts (Running) Maximum Watts (Starting) Light Bulb 75W Refrigerator/Freezer TOTALS

Bore Hole Pump Model Nos: CBB75 CBB100 Part Nos:

AIR PAINT SHAKER OWNER'S MANUAL

4400-Lb. Cargo Trolley

HEAVY DUTY DUAL BATTERY TRAY

500kg TELESCOPIC TRANSMISSION LIFTER

600-lb. Trailer Dolly

BELT GRINDER INSTRUCTION MANUAL READ CAREFULLY AND UNDERSTAND THESE INSTRUCTIONS BEFORE USE.

The breath sample was not strong enough to detect a reading. After warm up, please blow strong and steadily into the mouthpiece.

Rescue Pac. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference

84in. Driveway Drag. Owner s Manual

ASSEMBLY & OPERATION INSTRUCTIONS (HS-PZ002)

HIGH LIFT HYDRAULIC TRANSMISSION JACK K12110

Hydraulic Furniture Movers

Euro Lightweight Wheeled Walker

Push Trolley. Owner s Manual

HOT AIR GUN MODEL No. CHG 1500B Part No

Adjustable Steel Welding Table

12V Oil Extractor Pump

250W Folding Solar Panel USER MANUAL PLEASE READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE USE.

Instruction Manual CORDLESS DRILL & DRIVER 18V. Model SROM 1170

1 2 " H Y D R AU L I C V E H I C L E P O S I T I O N I N G J A C K OWNER S MANUAL

EXTRA WIDE STEEL ROLLATOR

Low-Profile Drum Caddy

2.2 CUFT 65L CEMENT MIXER

Mini Cement Mixer. Owner s Manual

MULTI PURPOSE SAW 500W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX MSW Multi-purpose Saw. Blades x 3.

BENCH GRINDER MODEL NO. OZBG150WA

Instruction Manual. CORDLESS DRILL 18V Li-ion WITH IMPACT FUNCTION. Model SROM 1172

ELECTRIC CAR POLISHER

TJ lb Capacity Trailer Jack. 2-in-1 Combo With Swing Back Design. Assembly & Operating Instructions

ASSEMBLY & SERVICE MANUAL

MULTI PURPOSE MIXER INSTRUCTION MANUAL. 1600w Variable Speed. Paddle KNOW YOUR PRODUCT

OWNER S MANUAL PRODUCT CODE: 2006T

1500-lb Snowmobile Dollies

6 x 10 Belt Disc Sander

Cordless Line Trimmer

C3 Operating Instructions

56V BATTERY 2.0AH/2.5AH/4.0AH/6.0AH MODEL NUMBER BA1120E/BA1400/BA2240E/BA3360 CHARGE BEFORE FIRST USE

INSTRUCTION MANUAL. Stephenson Road Speedwell Industrial Estate Staveley Chesterfield S43 3JN

1000-lb Hydraulic Truck Crane

1000-Lb. Drum Truck. Owner s Manual

CORDLESS TACKER MODEL NO: CCT48 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0414

Compact Solar Charger. Model Number ACSC-116 INSTRUCTION MANUAL

Package Contents Part A (3) I-Beam (1) Base (2) Other parts

Transcription:

CEMENT MIXERS & MACHINERY Electric and Petrol models USER & WARRANTY GUIDE AMES TRUE TEMPER AUSTRALIA PTY LTD TRADING AS WESTMIX VICTORIA HEAD OFFICE: Level 1, 660 Doncaster Road, Doncaster, Victoria 3108 ABN: 34 144 018 280 CUSTOMER SERVICE: Tel.: 1300 367 387 Fax: (03) 8523 2399 Email: customerservice@westmix.com.au

Thankyou for purchasing an ATTA cement mixer. Our cement mixers are designed with a specific purpose in mind. Whether you are a professional tradesman or a home handyman it is important to have the right mixer for the right job. It is important when using your mixer that you follow the instructions closely and if unsure contact the manufacturer or place of purchase. Remember to look after your mixer as proper attention and servicing will provide you with many years of satisfying service. CAUTION Read this manual carefully before using your ATTA cement mixer. Make yourself familiar with the warranty conditions, instructions and safety operations. IMPORTANT Service is strictly from dealer or manufacturer to prevent voiding warranty. All claims must be made in the way set out below. Where a claim is made a receipt of purchase must be produced. CEMENT MIXER WARRANTY All cement mixers are covered under the following: Other than for motors, 12 months warranty against faulty parts. 12 months warranty applies to all motors with the exception of CMG electric motors and HONDA petrol motors. The warranty period commences on the date of purchase by the person who first intends to use the product.

Conditions of warranty WARRANTY (Receipt of purchase must be produced) GENERAL CEMENT MIXER MAINTENANCE 1. Lubricate the cement mixer regularly and in accordance with the lubrication instructions. 2. After use wash down cement mixer thoroughly removing all cement etc (Make sure the electric motor is covered). When dry lightly oil the inside of the bowl (steel bowls only). Do not use too much oil as this may spoil the next mix. 3. Frequently check that all nuts and bolts are tight. 4. If the cement mixer is standing idle for a period of time store under cover and protect it from the weather. Cover with plastic or canvas sheet. This warranty is provided by Ames True Temper Australia Pty Ltd ( WESTMIX ) of Unit 3 / 251 Ferntree Gully Road, Mount Waverley, VIC 3149 Warranty on this product covers the first end user only. The first end user shall mean the person who purchased the unit first for its intended use. The warranty does not apply if the product is resold during the warranty period. In providing such warranty for valid claims made within the specified warranty period we will make available free of charge to the first end user replacement parts for those parts covered under the warranty. A warranty claim can only be approved upon inspection by Westmix or its authorised agent. CMG electric and HONDA petrol motors are not covered by this warranty. Any claim in relation to such motors should be directed to its manufacturer. The warranty does not cover any other loss or damage or damage caused by misuse and will only apply where the product is used in accordance with these instructions.

MODEL NUMBER... PURCHASE DATE... SERIAL NUMBER... PURCHASED FROM...... The benefits to you given by this warranty are in addition to other rights and remedies of the consumer under a law in relation to the goods the subject of this warranty. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. HOW TO MAKE A CLAIM To make a claim you need to contact Westmix by: Calling: telephone number (Australia) 1300 367 387 Emailing: customerservice@westmix.com.au Writing to: The Claims Manager, Ames True Temper Australia Pty Ltd, Unit 3/251 Ferntree Gully Road, Mt Waverley, VIC 3149 You will need to provide proof of purchase when making a claim and provide this user and warranty guide. Westmix may also require you to return the product or part of it. You must bear the cost of claiming the warranty. If the product or part needs to be returned to Westmix you must bear the cost of delivery. The replacement product or part or repaired product will be made available for your collection at an address nominated by Westmix. THIS WARRANTY MUST BE RETAINED BY THE END USER AND PRESENTED WITH PROOF OF PURCHASE WHEN A WARRANTY CLAIM IS MADE.

SAFETY AND WARNINGS As with all machinery, there is an element of risk involved. Using your equipment with caution and respect will considerably lessen the chance of personal injury. It is essential that you use this product only for its intended purpose. Do not modify this product without prior consultation with the manufacturer as this will void any warranty. READ THE FOLLOWING BEFORE USING CEMENT MIXER 1. Always keep safety guards in place and in working order. 2. Never attempt any servicing whilst mixer is operating. 3. Do not overload mixer. This can affect its performance and make it unstable. 4. Never use in a dangerous environment. Do not expose to rain or damp conditions. Use in well lit area and away from explosive liquids and gases. 5. Keep children and visitors away from the mixer whilst in operation. 6. Do not wear loose clothing or jewelry, and ensure long hair is tied back. Wear appropriate hearing protection. 7. Never leave the mixer running whilst unattended. 8. Always keep work area clear and free from clutter. 9. Always use mixer in a well ventilated area. 10. Keep hands well clear of the bowl whilst in operation. 11. Always check for damaged parts before operation. 12. Never operate mixer whilst under the influence of alcohol, drugs or medication.

MAINTENANCE INSTRUCTIONS LUBRICATION When purchasing this mixer, the arm section should already be filled with grease. Westmix uses Valvoline multi-lube lithium 2 ep grease or an equivalent. Regularly check and when required, apply grease through the grease nipples located in the arm section. Grease can be applied until it appears through the bearings or overflows through the nipples. When applying grease to the pinion/shaft area, loosen the bolts on the mixer arm mount to maximise grease coverage. Tighten bolts once the reservoir is full. BELT TENSION Check belt tension every 20 hours of running time. To adjust the belt tension, loosen the bolts on the motor mount clamp and allow the motor to lower. Tighten bolts when tension is correct. The belt has the correct tension when it gives a lively resound when drawn aside and released, whilst a slack belt feels lifeless. If the tension is too low, slipping may occur causing wear and tear to the belt and pulley. If the belt is too tight, it may cause excessive wear to the bearings. Do not attempt to adjust belt whilst the mixer is running.

MAINTENANCE INSTRUCTIONS 1/2 HP ELECTRIC MOTOR Always start the motor before loading the mixer. To gain access to the motor ensure the motor is switched off and remove cover. The unit must be unearthed when operated with an electric motor. Avoid using more than one extension cord. If an extension cord is to be used, it is recommended that a splash proof connector be used and kept well clear from any water. Since extension leads will cause a voltage drop, it is essential that the conductors in the lead conform to the following specifications: 1-25m long - conductor diameter = 1.5mm 25-50m long - conductor diameter = 2.5mm If in doubt, consult a qualified electrician. Always keep the electric motor free from water and moisture. Do not attempt any electrical repairs yourself. PETROL MOTOR Always start the motor before loading the mixer. Ensure the petrol motor is switched off before attempting any servicing. Use unleaded petrol and follow manufacturers instructions. To gain access to petrol motor, unlock cover and lift.

CEMENT WMC2.2SP WM2.2 WMP3.5HON WMTC3.5 MIXERS MACHINERY KC1824 Plate Compactor 14 Brick Saws PC7000-HONDA 16 Brick Saws WHEEL BARROWS FW14000-95lt Steel 55K - 99lt Steel WA64SP - 99lt Poly Kelso Master Builder's 95lt Poly TROLLEYS Multi-Adjustable Trolley Large Fridge Stair Climber Pram handled trolley P handle trolley Choose from a wide range of cement mixers, machinery, wheelbarrows and trolleys. More information on our range is available at www.westmix.com.au