Fluorescent fitting Features Double central locking for ingress protection All components mounted on hinged and removable gear tray which gives easy access for maintenance Including accessories (cable gland, plugs & fixing brackets) Option: Automatic switch off on opening for safe maintenance Specifications Main body constructed of glass reinforced polyester for high impact strength UV protected polycarbonate diffuser to resist harsh environments Rated voltage - 26Vac/Vdc 5-6Hz Wiring configuration: 5 wires xentries M2 2x Emergency versions (Type: EM version h battery duration or EMA with h with automatic test and blackstart capabilities) Certifications Standards Approved to: EN679-, 679-5, 679- EC Type examination Directive 94/9/EC certificate to: Ex II G Ex nr IIC T4 Gc for -4 C to + 6 C Ex nr IIC T5 Gc for -4 C to + 5 C Ex II D Ex tc IIIC T5 C Dc IP66 for -4 C to + 6 C Ex tc IIIC T C Dc IP66 for -4 C to + 5 C Glow wire test: 96ºC EN6598-2-22 Ambient -2 C to +55ºC EVN, temperature range: - C to +5ºC EVN EM & EVN EMA IP test: IP66 IEC 6529 (2) Impact protection index: IK9 according to IEC 62262 ABB DTS - Light fittings, boxes & custom built control panels for hazardous areas LIT-4 UK /5 /5
Fluorescent fitting 2 x M8 hole 2mm depth B C 7 mm EVN Dimensional drawing A 7 mm Technical specifications Light Current External dimensions mm Type Wiring Configuration Rating W A 2V A B C Weight kg 5 wires: Equipped with cable gland & 2 plugs EVN2-5 wires x 8.9 785 42 4 4.4 EVN4-5 wires x 6.7 7 9 7 7.6 EVN65-5 wires x 58.26 67 9 7 9.2 EVN22-5 wires 2 x 8.7 785 42 4 4.4 EVN24-5 wires 2 x 6. 7 9 7 7.6 EVN265-5 wires 2 x 58.5 67 9 7 9.2 EVN2-D 5 wires & continuity plate x 8.9 785 42 4 4.4 EVN4-D 5 wires & continuity plate x 6.7 7 9 7 7.6 EVN65-D 5 wires & continuity plate x 58.26 67 9 7 9.2 EVN22-D 5 wires & continuity plate 2 x 8.7 785 42 4 4.4 EVN24-D 5 wires & continuity plate 2 x 6. 7 9 7 7.6 EVN265-D 5 wires & continuity plate 2 x 58.5 67 9 7 9.2 5 wires through: Equipped with 2 cable glands & plug EVN2-B 5 wires through x 8.9 785 42 4 4.4 EVN4-B 5 wires through x 6.7 7 9 7 7.6 EVN65-B 5 wires through x 58.26 67 9 7 9.2 EVN22-B 5 wires through 2 x 8.7 785 42 4 4.4 EVN24-B 5 wires through 2 x 6. 7 9 7 7.6 EVN265-B 5 wires through 2 x 58.5 67 9 7 9.2 EVN2-E 5 wires through & 2 continuity plates x 8.9 785 42 4 4.4 EVN4-E 5 wires through & 2 continuity plates x 6.7 7 9 7 7.6 EVN65-E 5 wires through & 2 continuity plates x 58.26 67 9 7 9.2 EVN22-E 5 wires through & 2 continuity plates 2 x 8.7 785 42 4 4.4 EVN24-E 5 wires through & 2 continuity plates 2 x 6. 7 9 7 7.6 EVN265-E 5 wires through & 2 continuity plates 2 x 58.5 67 9 7 9.2 Technical information Lamps Fluorescent Lamp (order separately) T8 bi-pin tube, lampholder G, diameter 26mm - white industry 4 k. Photometric curve See page 6/ Rated voltages Electronic ballast: - 26Vac/Vdc 5-6Hz. Power factor.98. Terminal block (screws) 6mm²(rigid wire), 4mm² (flexible wire) Terminals supplied L, L2, L, N, PE (looping possible with one additional cable gland) Cable entries Three entries M2 For non- armoured cable: included two M2 nylon plugs (EX-M2) and one M2 nylon cable gland, diameter 6-2mm (EXCGM2S) For armoured cable: included continuity plate - two M2 nylon plugs (EX-M2) and one M2 nickel plated brass cable gland, diameter 6-2/ 8.5-6mm (EXN4MMC) Housing Fiberglass reinforced polyester housing for high impact strength, UV protected polycarbonate diffuser to resist harsh environments, Painted steel gear tray & Stainless steel 6L insert Fixing (included) V5-2x Two zinc-plated steel brackets for ceiling mounting /6 ABB DTS - Light fittings, boxes & custom built control panels for hazardous areas LIT-4 UK /5
Emergency fluorescent fitting - h EVN EM - Zones 2 & 22 Technical specifications Light Current External dimensions mm Type Wiring Configuration Rating W Battery h A 2V A B C Weight kg wires: Equipped with cable gland & 2 plugs EVN2EM- wires x 8 h.9 785 42 4 5.8 EVN4EM- wires x 6 h.7 7 9 7 9. EVN65EM- wires x 58 h.26 67 9 7.6 EVN22EM- wires 2 x 8 h.7 785 42 4 5.8 EVN24EM- wires 2 x 6 h. 7 9 7 9. EVN265EM- wires 2 x 58 h.5 67 9 7.6 EVN2EM-D wires & continuity plate x 8 h.9 785 42 4 5.8 EVN4EM-D wires & continuity plate x 6 h.7 7 9 7 9. EVN65EM-D wires & continuity plate x 58 h.26 67 9 7.6 EVN22EM-D wires & continuity plate 2 x 8 h.7 785 42 4 5.8 EVN24EM-D wires & continuity plate 2 x 6 h. 7 9 7 9. EVN265EM-D wires & continuity plate 2 x 58 h.5 67 9 7.6 * For dimensional drawing please refer to page /6 Electrical Features Lamps Fluorescent Lamp (order separately) T8 bi-pin tube, lampholder G, diameter 26mm - white industry 4 K Rated voltages Electronic ballast: 22-24 Vac/Vdc 5/6Hz Power factor.98. Battery Battery NiCd 7,2V Lumen output in emergency mode ( lamp lit) 2 hours: 4% for EVN2, EVN22,% for EVN4, EVN24, % for EVN65, EVN265 hours: 24% for EVN2, EVN22, 8% for EVN4, EVN24, 8% for EVN65, EVN265 Monitored by one LED Bs Bs Terminal block Terminal block (screws plug in terminal block) 4mm²(rigid wire), 2,5mm² (flexible wire) Terminals supplied L, L2, L, LS, N, PE (looping possible with one additional cable gland) Cable entries Three entries M2 For non- armoured cable: included two M2 nylon plugs (EX-M2) and one M2 nylon cable gland, diameter 6-2mm (EXCGM2S) For armoured cable: included continuity plate - two M2 nylon plugs (EX-M2) and one M2 nickel plated brass cable gland, diameter 6-2/ 8,5-6mm (EXN4MMC) Housing Fiberglass reinforced polyester housing for high impact strength, UV protected polycarbonate diffuser to resist harsh environments Stainless steel 6L insert Painted steel geartray Fixing V5-2x Two zinc-plated steel brackets for ceiling mounting Emergency function diagrams Wiring provided by DTS - Maintained Mode Switch between LS/L - Non Maintained Mode * s Ls L L E Bs Bs N N Ls Ls L L L2 L E ON Lit Charged OFF Only emergency tube lit Discharged ON OFF Charged OFF Only emergency tube lit Discharged * This table corresponds to the position open. If the switch is on position close, refer to the table on the left ABB DTS - Light fittings, boxes & custom built control panels for hazardous areas LIT-4 UK /5 /7
Emergency Fluorescent fitting with automatic test & blackstart capabilities - h. EVN EMA - Zones 2 & 22 Technical specifications Light Nominal External dimensions mm Type Wiring Configuration Rating W Battery h Current A A B C Weight kg 5 wires: Equipped with cable gland & 2 plugs EVN2EMA- 5 wires x 8 h.9 785 42 4 5.8 EVN4EMA- 5 wires x 6 h.7 7 9 7 9. EVN22EMA- 5 wires 2 x 8 h.7 785 42 4 5.8 EVN24EMA- 5 wires 2 x 6 h. 7 9 7 9. EVN2EMA-D 5 wires & continuity plate x 8 h.9 785 42 4 5.8 EVN4EMA-D 5 wires & continuity plate x 6 h.7 7 9 7 9. EVN22EMA-D 5 wires & continuity plate 2 x 8 h.7 785 42 4 5.8 EVN24EMA-D 5 wires & continuity plate 2 x 6 h. 7 9 7 9. * For dimensional drawing please refer to page /6 Electrical Features Lamp Fluorescent Lamp (order separately) T8 bi-pin tube, lampholder G, diameter 26mm - white industry 4 K Rated voltages Electronic ballast: 22-24Vac/Vdc 5/6Hz Power factor.98. Battery Battery NiCd 6V 4Ah for EVN2, EVN22 Battery NiCd 6V 7Ah for EVN4, EVN24 EVS EM A terminals wiring diagram Lumen output in emergency mode ( lamp lit) hours: 4% for EVN2, EVN22 hours: % for EVN4, EVN24 Closed loop option Closed loop option Monitored by two LED EVS EM A terminals wiring diagram Terminal block (spring) Bs Bs Bs Bs Jumped bar x2 terminal blocks 4mm²(rigid wire), 2,5mm² (flexible wire) N N Ls Terminals supplied L, L2, L, LS, N, E, BS (looping possible with one additional cable gland) Cable entries Three entries M2 For non- armoured cable: included two M2 nylon plugs (EX-M2) and one M2 nylon cable gland, diameter 6-2mm (EXCGM2S) For armoured cable: included continuity plate - two M2 nylon plugs (EX-M2) and one M2 nickel plated brass cable gland, diameter 6-2/ 8,5-6mm (EXN4MMC) Housing Fiberglass reinforced polyester housing for LNLNL2Ls Ls L L L2 high impact strength, UV protected polycarbonate diffuser to resist harsh environments, 2 x M8 Stainless steel 6L insert Painted steel geartray E E Ls L E L E Fixing (included) V5-2x Two zinc-plated steel brackets for ceiling mounting VS EM A Emergency terminals wiring function diagramdiagrams Wiring provided by DTS - Maintained Mode losed loop option E Bs Bs E Bs Bs N N Ls Ls L L L2 L E Switch between LS/L - Non Maintained Mode Switched option Switched option E Bs Bs E Bs Bs N N Ls Ls LNLNL2LsLLsE L L L2 L E Preventive maintenance mode Battery charge - daily Emergency lamp during min - weekly Battery charge capacity during hr - quaterly Clear system test display Switched option Switched option Battery charge monitored by 2 LED witched option ON Lit Charged OFF Only emergency Discharged tube lit ON OFF Charged OFF Only emergency Discharged tube lit Healthy (test OK) Emergency or Indicator Lamp Fault (must be replaced) Test in Progress (waiting end of test) Fault (replace battery) E Bs Bs E Bs Bs N N Ls Ls L NL NL2LsLLsE L L L2 L E Emergency function diagram - Blackstart mode Switched option The EMA product contains 2 blackstart terminals. The blackstart mode consists in disconnecting the battery and so switching off the fitting. This mode is mainly used during maintenance. As soon as the maintenance is done, the main power ON and the blackstart terminals connected, the emergency fitting is ready to be used as the battery is not discharged. Switch between BS terminals E Bs Bs This table corresponds to the position open. If the switch is on position close, please refer to the above tables. Mains supply Tube Battery ON Lit Disconnected - not charged OFF OFF Disconnected - not charged /8 ABB DTS - Light fittings, boxes & custom built control panels for hazardous areas LIT-4 UK /5
Accessories Lamps Bi-pin T8 fluorescent lamps Specifications: G - ø 26mm Colour temperature: White industry 4 K CRI: > 8 lm/w: 65 to 9 Average operating life: 2, hours Type Power W Lumen output lm Lampholder TL8W 8 25 G TL6W 6 5 G TL58W 58 52 G Fixing Accessories 2 25 ø9 6 2 25 M Brackets V5 2 x pair of zinc plated steel for ceiling mounting (Included with product) V6 2 x stainless steel 6L brackets for ceiling mounting Hook Type V24 Specifications 2x Zinc plated steel ceiling suspension hook 6, 2 Ø 8.5 2 2xø9 7 2 ø9 6 maxi Mounting bracket clip V4 2x Rapid ceiling mounting with stainless steel clip Hinged bracket V2 2x Steel hinged brackets plastic coated 25 M8 α ø9 ~7 4 Fixing bracket and flange V8 2x zinc plated steel pole mounted brackets for ø ¼ & ½ V9 2x zinc plated steel pole mounted brackets for ø2 V2 2x Stainless steel 6L pole mounted brackets for ø ¼ & ½ V22 2x Stainless steel 6L pole mounted brackets ø2 ABB DTS - Light fittings, boxes & custom built control panels for hazardous areas LIT-4 UK /5 /9
4 5 6 7 8 9 2 4 5 6 7 8 9 2 2 22 2 24 4 5 6 7 8 9 2 4 5 6 7 8 9 2 SAUF INDICATION CONTRAIRE: FINITION: LES COTES SONT EN MILLIMETRES ETAT DE SURFACE: TOLERANCES: LINEAIRES: ANGULAIRES: NOM AUTEUR VERIF. APPR. FAB. QUAL. SIGNATURE DATE MATERIAU: MASSE: CASSER LES ANGLES VIFS TITRE: No. DE PLAN ECHELLE::5 NE PAS CHANGER L'ECHELLE REVISION FEUILLE SUR A A B C D E F G H J K L M N P Q Linear fittings Spare parts V V4 V8N Spare parts Type Specifications EVD 4-24 (toutes config.) V2W 2W diffuser with gasket for EV. range V4W 4W diffuser with gasket for EV. range V65W 65W diffuser with gasket for EV. range V4X2WE Gear tray X8W with electronic ballast -26V 5-6Hz for EVN2 V4X4WE Gear tray X6W with electronic ballast -26V 5-6Hz for EVN4 V4X65WE Gear tray X58W with electronic ballast -26V 5-6Hz for EVN65 V42X2WE Gear tray 2X8W with electronic ballast -26V 5-6Hz for EVN22 V42X4WE Gear tray 2x6W with electronic ballast 22-24V 5-6Hz for EVN24 V42X65WE Gear tray 2x58W with electronic ballast 22-24V 5-6Hz for EVN265 V4X2WEM Emergency gear tray x8w with electronic ballast 22-24V 5-6Hz for EVN2EM V4X4WEM Emergency gear tray x6w with electronic ballast 22-24V 5-6Hz for EVN4EM V4X65WEM Emergency gear tray x58w with electronic ballast 22-24V 5-6Hz for EVN65EM V42X2WEM Emergency gear tray 2x8W with electronic ballast 22-24V 5-6Hz for EVN22EM V42X4WEM Emergency gear tray 2x6W with electronic ballast 22-24V 5-6Hz for EVN24EM V42X65WEM Emergency gear tray 2x58W with electronic ballast 22-24V 5-6Hz for EVN265EM V4X2WEMA Emergency gear tray + auto test X8W with electronic ballast 22-24V 5-6Hz for EVN2EMA V4X4WEMA Emergency gear tray + auto test X6W with electronic ballast 22-24V 5-6Hz for EVN4EMA V42X2WEMA Emergency gear tray + auto test 2X8W with electronic ballast 22-24V 5-6Hz for EVN22EMA V42X4WEMA Emergency gear tray + auto test 2X6W with electronic ballast 22-24V 5-6Hz for EVN24EMA V8N Bi-pin G lampholder V252x4W Brass continuity plate for EV. 2, EV. 22, EV. 4, EV. 24 V2565W Brass continuity plate for EV. 65, EV. 265 EXCGM2S- Kit M2 Exe IIC nylon cable gland for non armoured cable diameter 6-2, and locknut EXN4MMC- Kit M2 Ex-d IIC Ex-e II Ex-td double compression nickel plated cable gland for armoured cable diameter inner 6-2 outer 8,5-6, locknut, sealing gasket /2 ABB DTS - Light fittings, boxes & custom built control panels for hazardous areas LIT-4 UK /5