Commercial and Industrial coolers Searle Commercial and Industrial Coolers COMMITTED TO ENGINEERING INNOVATION
Searle cooler
WE ARE KELVION THE NEW BRAND IN HEAT EXCHANGE GEA Heat Exchangers has changed: another new standalone company has been created out of the former Heat Exchanger Division of the GEA Group AG. The name Kelvion is new, but we continue as global experts in heat exchange. As always, we remain committed to earning your trust. You ll still recognise us. We continue to develop our products, manufacture them with precision and distribute globally. We continue to offer one of the world s largest heat exchanger product portfolios: Plate heat exchangers, shell & tube heat exchangers, finned tube heat exchangers, modular cooling towers and refrigeration heat exchangers for a wide range of applications. We operate in global markets for power generation, oil and gas, chemistry, marine applications, climate and environment, and food and beverages. From us, you can expect products with outstanding levels of efficiency, safety, and sustainability. More importantly, we care about your business, like close, trusted partners. Customers rely on us to understand their needs, boost their performance, and deliver products that always get the job done. We compete for the toughest deals, in the harshest environments. But we re not too big to care. We re Kelvion ready to take on the challenges of heat exchange. www.kelvion.com Experts in Heat Exchange. 3
Searle TEC cooler THE IDEAL COOLER AT A COMPETITIVE PRICE The Searle TEC cooler range by Kelvion, consists of nine small blow through unit coolers, with a wide operating range of + 10 C to -40 C. The coolers are suitable for high, medium and low temperature applications in the commercial refrigeration sector. The range has 1, 2 and 3 fan configurations, and can be either ceiling mounted or wall mounted (optional wall mounting kit must be specified). The highly efficient performance of the cooler is accompanied by a pleasing aesthetic design whilst maintaining a service focused functionality. Suitable for use in most refrigeration and air conditioning applications. EC fanset as standard Unit can be installed either vertically or horizontally Performance optimised for all modern refrigerants CO2 DX options available
Features Comprises of 9 models Available in 5 FPI (5.1mm) and 7 FPI (3.6mm) fin spacings 1, 2 or 3 fan configurations Eurovent Certified
Searle TEC air cooler TEC RANGE PRODUCT PROFILE 1 CASEWORK 3 COIL The casework is formed from galvanized steel and finished with oven cured white epoxy powder paint (RAL 9010). Comprising of a back plate with formed sides to which the coil is fitted. The front panel is a combined fan plate and drain tray which can be lowered on a hinge bracket to gain access to the electrical box and coil connections. The coil connections are handed on the left hand side when looking into the air off face of the cooler and are the only handing available The coil technology used in the TEC cooler is optimised specifically for DX refrigeration applications. Inner grooved tubes are used to optimise performance by enhancing the internal heat transfer coefficients. The tube is then mechanically expanded to provide a tight Interference fit between the fin and tube. Manufactured from 3/8 Inner Grooved Copper Tube Tube Pitch Across flow = 25.4mm Tube Pitch In Direction of flow = 22mm Fin Spacing(s): 5 FPI (5.1mm) and 7 FPI (3.6mm) 2 FANS AND CONTROLS CO2 OPTION The TEC Cooler from Kelvion has been designed optimising EC fan set technology as standard. This has resulted in a market leading, highly efficient cooler that is both versatile and robust. 1-3 fans as standard Axial (Propeller) Fan set 230mm diameter 50 & 60 Hz as standard Metal wire guard and wall ring Nominal speed 1400rpm Nominal Power 21W Motor Rating IP65 Kelvion has worked closely with various stakeholders in the refrigeration sector to enhance its standard product specifically for CO2 refrigeration applications. This has resulted in the next generation of unit coolers with a maximum operating pressure of 75 Bar as standard. Advanced technology available from Kelvion enables companies to cut refrigeration operating costs significantly, offsetting some of the impact of high energy prices. Reliable refrigeration is a must-have across the food chain from farm to supermarket, and with costs rising all round, users are showing keen interest in the savings potential in the next generation of unit coolers. TEC Refrigerant data Refrigeration R404A R134a R507A R407A/F R407C Capacity factor (dew point, DT1) 1.00 0.91 0.97 1.24* 1.26* Refrigerant charge density (kg/dm 3 ) 0.312 0.338 0.313 0.332 0.332 * Capacity factors for refrigerants with high glide apply only at the nominal rating condition. Refrigerant charge densities are based on 25% of the internal volume being liquid.
1 3 2 Nomenclature TEC 4-5 60 AL Range: TEC, TECX Model: 1, 2, 3, 3.5, 4, 5, 6, 7, 8 Fin Spacing: 5 FPI (5.1mm), 7 FPI (3.6mm) Supply frequency: Blank = 50Hz, 60 = 60Hz Fin material: AL = Aluminium Capacities: R404A: 0.52 kw - 3.4 kw CO2: 0.34 kw - 3.8kW
TEC Selection Data Notes: Rating conditions: The duties shown in this brochure are at EN 328 Standard Condition 2 (-8 C saturated suction temperature, 0 C air entering). For data on refrigerants not shown, please contact your supplier. * DT1 is the difference between the entering air temperature and the saturated suction temperature at the outlet of the cooler. ** Noise levels are based on free field conditions at a distance of 3m. Actual noise levels will depend upon cold store construction, store loading and the number of coolers installed. *** Terminal air velocity 0.25m/s, free air conditions at 10 C. throw cannot be considered an absolute value because many factors have a substantial effect on the distance achieved. Fin spacing 7 FPI (3.6mm) 5 FPI (5.1mm) Model Capacity R404A * No. of fans Motor details 230V - 1ph - 50Hz Fan data Connections Power input FLC per fan SC per fan Speed Volume throw *** Noise level @ 3m ** Inlet Outlet Internal volume Surface area Ref Charge kw W amps amps RPM m 3 /s kg db(a) dm 3 m 2 kg kw TEC1-7 0.57 1 21 0.2 0.9 1440 0.15 4.5 51 3/8" 3/8" 0.4 1.5 0.1 7 TEC2-7 0.89 1 21 0.2 0.9 1440 0.15 4.5 50 3/8" 3/8" 0.8 2.9 0.3 8 TEC3-7 1.04 1 21 0.2 0.9 1440 0.15 5.0 50 3/8" 3/8" 1.1 4.1 0.5 12 TEC3.5-7 1.25 1 21 0.2 0.9 1440 0.16 5.0 50 1/2" 3/8" 1.4 5.4 0.4 10 TEC4-7 1.72 2 42 0.2 0.9 1440 0.26 5.0 53 1/2" 3/8" 1.4 5.4 0.5 14 TEC5-7 2.04 2 42 0.2 0.9 1440 0.30 5.5 52 1/2" 3/8" 1.8 7.3 0.6 16 TEC6-7 2.29 2 42 0.2 0.9 1440 0.32 5.5 51 5/8" 1/2" 2.3 9.7 0.8 19 TEC7-7 3.02 3 63 0.2 0.9 1440 0.45 6.0 54 7/8" 1/2" 2.4 10.3 0.8 24 TEC8-7 3.40 3 63 0.2 0.9 1440 0.48 6.0 53 7/8" 1/2" 3.2 13.8 1.1 27 TEC1-5 0.52 1 21 0.2 0.9 1440 0.16 4.5 51 3/8" 3/8" 0.4 1.1 0.1 7 TEC2-5 0.84 1 21 0.2 0.9 1440 0.15 4.5 50 3/8" 3/8" 0.8 2.1 0.3 8 TEC3-5 1.00 1 21 0.2 0.9 1440 0.16 5.0 50 3/8" 3/8" 1.1 3.0 0.5 12 TEC3.5-5 1.15 1 21 0.2 0.9 1440 0.17 5.0 50 1/2" 3/8" 1.4 4.0 0.4 10 TEC4-5 1.61 2 42 0.2 0.9 1440 0.28 5.0 53 1/2" 3/8" 1.4 4.0 0.5 14 TEC5-5 1.89 2 42 0.2 0.9 1440 0.31 5.5 52 1/2" 3/8" 1.8 5.4 0.6 16 TEC6-5 2.14 2 42 0.2 0.9 1440 0.34 5.5 51 5/8" 1/2" 2.3 7.1 0.8 19 TEC7-5 2.76 3 63 0.2 0.9 1440 0.47 6.0 54 7/8" 1/2" 2.4 7.6 0.8 24 TEC8-5 3.18 3 63 0.2 0.9 1440 0.50 6.0 53 7/8" 1/2" 3.2 10.1 1.1 27 Weight TEC CO2 Fin spacing 7 FPI (3.6mm) Model Capacity R404A * No. of fans Motor details 230V - 1ph - 50Hz Fan data Connections Power input FLC per fan SC per fan Speed Volume Internal volume Surface area Ref Charge kw W amps amps RPM m 3 /s kg db(a) dm 3 m 2 kg kw TEC1-7 0.34 1 21 0.2 0.9 1440 0.16 4.5 51 3/8" 5/8" 0.4 1.1 0.4 8 TEC2-7 0.66 1 21 0.2 0.9 1440 0.14 4.5 50 3/8" 5/8" 0.8 2.1 0.4 9 TEC3-7 0.84 1 21 0.2 0.9 1440 0.16 5.0 50 3/8" 5/8" 1.1 3.0 0.8 11 TEC3.5-7 1.00 1 21 0.2 0.9 1440 0.17 5.0 50 3/8" 5/8" 1.4 4.0 0.8 14 TEC4-7 1.37 2 42 0.2 0.9 1440 0.28 5.0 53 3/8" 5/8" 1.4 4.0 0.8 15 TEC5-7 1.81 2 42 0.2 0.9 1440 0.31 5.5 52 3/8" 5/8" 1.8 5.4 0.8 19 TEC6-7 2.22 2 42 0.2 0.9 1440 0.34 5.5 51 3/8" 5/8" 2.3 7.1 1.4 21 TEC7-7 2.86 3 63 0.2 0.9 1440 0.47 6.0 54 3/8" 5/8" 2.4 7.6 1.4 27 TEC8-7 3.30 3 63 0.2 0.9 1440 0.50 6.0 53 3/8" 5/8" 3.2 10.1 1.8 31 throw *** Noise level @ 3m ** Inlet Outlet Weight TEC Dimension data Model No. of fans A Defrost Coil kw Tray kw TEC1 1 453 (x4) 275 2 x 250 TEC2 1 453 (x4) 550 2 x 250 TEC3 1 618 (x4) 700 2 x 325 TEC3.5 1 793 (x4) 900 2 x 425 TEC4 2 793 (x4) 900 2 x 425 TEC5 2 524 (x6) 1000 2 x 575 TEC6 2 524 (x6) 1000 2 x 675 TEC7 3 728 (x6) 1400 2 x 1030 TEC8 3 728 (x6) 1400 2 x 1030 Options - Part numbers of options supplied separately Part type/ Description TEC1 TEC2 TEC2 TEC3.5/4 TEC4 TEC5 TEC6 TEC7 TEC8 Ceiling Mounting T2 LTKIT T3 LTKIT T3.5/4 T5/6LTKIT T7/8LTKIT Wall Mounting WT1/2LTKIT WT3 LTKIT WT3.5/4 Wall mounting kits WT1/2 PAN WT3 PAN WT3.5/4 PAN WT5 LTKIT WT5 PAN WT6 LTKIT WT6 PAN WT7 PAN WT7/8 WT8 PAN
TEC dimension drawings TEC 1 & TEC 2 TEC1-5 & TEC7 36 525 36 378 120 172.5 210 32 262 3/4 D/CONN 180 TEC 3 690 36 36 TEC3.5 & TEC4 40.8 865 52 36.3 36 425 36 A 32 345 3/4 D/CONN 32 220 3/4 D/CONN 220 432 432 TEC5 1120 36 541 36 32 290 3/4 D/CONN 290 TEC6 560 560 1120 36 36 538 TEC6 & TEC8 378 120 223 260 32 290 3/4 D/CONN 560 560 290 41,6 TEC7 1528 36 474 474 36 Mounting Slot R 7,5 32 290 3/4 D/CONN 764 764 290 TEC8 1528 36 474 474 36 16,5 R 4,0 32 290 3/4 D/CONN 764 764 290
Searle KEC air cooler HIGH EFFICIENCY HIGH PERFORMANCE The Searle KEC cooler is part of the next generation of Unit Coolers by Kelvion, with market leading performance, noise levels and energy efficiency. Using EC fan set technology as standard across the range, the power input for the KEC cooler is typically in excess of 50% lower than that of equivalent AC motor technology. The KEC coolers cover a capacity range from 1.2-10.5kW at Eurovent conditions and are the cooler of choice for a wide range of cold room applications. The KEC has a modern aesthetic design and is easy to install and maintain without compromise on reliability and rigidity. A range of refrigerants can be selected using Kelvion selection software. The KEC defrost system has been designed with efficiency and application variability in mind. The KEC utilises more heater elements than previous design variants, operating at a lower temperature to achieve a more even heat flux. Suitable for medium and low temperature cold room applications Unit is ceiling mounted. CO2 options for direct expansion and pumped applications 1, 2 or 3 fan configurations
Features Comprises of 10 models Available in 4mm, 6mm and 8mm fin spacings 1,2 or 3 fan configurations Eurovent certified
Searle KEC air cooler KEC RANGE PRODUCT PROFILE 1 CASEWORK 3 COIL The casework is formed from galvanized steel and finished with oven cured white epoxy powder paint (RAL 9010). The construction is both rigid and versatile, giving the installer and users flexibility and confidence in service life. Connections and junction boxes for the unit are easily accessible through removable side panels which are fixed in place using easy-alignment keyhole slots. The drain tray is fabricated from galvanised painted steel and is supplied loose, once the unit is installed on site the drain connection can be fitted to the tray and the tray fitted to the unit in its operating position. The coil used in the KEC range balances surface and defrost efficiency and is the result of extensive R&D. The coil is assembled in one block, is available as either 4 or 6 rows deep and uses using aluminium fins as standard. The coil has inner groove tubes on 43mm equilateral centres mechanically bonded to the fin. Manufactured from ½ Tube Tube Pitch Across flow: 43mm Tube Pitch In Direction of flow: 37.2mm Fin Spacing (s): 4mm, 6mm and 8mm Fin Enhancements: Light Ripple Formed heater holes 2 FANS CO2 OPTION The Searle KEC cooler from Kelvion, utilises EC fan sets as standard. The EC motors can accept 196-253V 1Ph at 50/60Hz with built in thermal protection. Fan diameter: 300mm Number of Blades: 5 Guard: Metal Wire (Black) Fan Rotation: Clockwise when facing air stream Motor Rating: IP54 Aluminium orifice Temperature Range :40 C to +40 C Kelvion has delivered a new generation of environmentally friendly CO2 unit coolers, with a capacity range of 0.9-9.9kW. Using the same robust case construction as the standard KEC range and utilising the same high efficiency fan sets, the difference lies in the coil itself. To develop this coil technology specifically for a range of CO2 applications, extensive testing and analysis was essential to ensure they deliver the performance required across a wide range of potential operating conditions. All units are tested to 1.43 x maximum operating pressure before delivery, and 3 standard operating pressure are offered as standard: 57 Bar = KEC-LP 80 Bar = KEC - MP 90 Bar = KEC-HP. KEC Refrigerant data Refrigeration R404A R134a R507A R407A/F R407C Capacity factor (dew point, DT1) 1.00 0.91 0.97 1.24* 1.26* Refrigerant charge density (kg/dm 3 ) 0.312 0.338 0.313 0.332 0.332 * Capacity factors for refrigerants with high glide apply only at the nominal rating condition. Refrigerant charge densities are based on 25% of the internal volume being liquid.
1 6 5 3 2 4 4 Drain Tray 5 End plates 6 Junction box Nomenclature KEC 35-4 L AL Range: KEC, KEC-LP, KEC-MP, KEC-LX, KEC-MX, KEC-HX Model: 10, 15, 20, 25, 30, 35, 40, 45, 55, 70 Fin Spacing: (Type for CO2): 4mm, 6mm, 8mm X = direct expansion, L = 57 bar, M = 80 bar, H = 90 bar Defrost: No defrost, L = Standard Electric defrost, HGD = Hot Gas Coil & tray, HGE = Hot Gas Coil & Electric tray. Each gas defrost option is followed with either an A/ B / C /D, to designate the circuiting option. Fin Material: AL = Aluminium Capacities: R404A: 1.2 kw - 10.5 kw CO2: 0.9 kw - 9.9kW
KEC Selection Data Fin spacing Model Capacity 8K R744 * No. of fans Motor details 230V - 1ph - 50Hz Fan data Connections Power input FLC per fan SC per fan Speed Volume throw *** Noise level @ 3m ** Inlet Outlet Internal volume Surface area Ref Charge kw W amps amps RPM m 3 /s kg db(a) dm 3 m 2 kg kw KEC10-4 1.65 1 33 0.35 0.50 1370 0.28 16.0 44 1/2 1/2 1.4 8.5 0.5 27 KEC15-4 2.01 1 33 0.35 0.50 1370 0.28 16.0 44 1/2 1/2 1.9 10.0 0.6 28 KEC20-4 2.35 1 33 0.35 0.50 1370 0.29 16.0 44 1/2 5/8 2.5 13.7 0.8 33 KEC25-4 3.00 1 77 0.70 1.00 1750 0.42 22.0 52 1/2 5/8 2.5 13.7 0.8 33 4mm KEC30-4 3.73 1 77 0.70 1.00 1750 0.40 22.0 52 1/2 7/8 3.8 20.5 1.2 35 KEC35-4 4.57 2 66 0.35 0.50 1370 0.58 16.0 47 1/2 7/8 4.3 24.9 1.4 47 KEC40-4 5.84 2 154 0.70 1.00 1750 0.83 22.0 55 1/2 7/8 4.3 24.9 1.4 47 KEC45-4 6.99 2 154 0.70 1.00 1750 0.81 22.0 55 1/2 7/8 6.5 37.4 2.1 53 KEC55-4 8.79 3 231 0.70 1.00 1750 1.25 22.0 57 1/2 7/8 6.3 37.4 2.0 67 KEC70-4 10.51 3 231 0.70 1.00 1750 1.21 22.0 57 5/8 7/8 9.4 56.0 3.0 74 KEC10-6 1.34 1 33 0.35 0.50 1370 0.31 16.0 44 1/2 1/2 1.4 5.8 0.5 27 KEC15-6 1.72 1 33 0.35 0.50 1370 0.31 16.0 44 1/2 1/2 1.9 6.8 0.6 28 KEC20-6 1.99 1 33 0.35 0.50 1370 0.32 16.0 44 1/2 5/8 2.5 9.4 0.8 33 KEC25-6 2.38 1 77 0.70 1.00 1750 0.43 22.0 52 1/2 5/8 2.5 9.4 0.8 33 6mm KEC30-6 3.16 1 77 0.70 1.00 1750 0.42 22.0 52 1/2 7/8 3.8 14.1 1.2 35 KEC35-6 3.85 2 66 0.35 0.50 1370 0.63 16.0 47 1/2 7/8 4.3 17.0 1.4 47 KEC40-6 4.63 2 154 0.70 1.00 1750 0.85 22.0 55 1/2 7/8 4.3 17.0 1.4 47 KEC45-6 5.97 2 154 0.70 1.00 1750 0.83 22.0 55 1/2 7/8 6.5 25.6 2.1 53 KEC55-6 7.00 3 231 0.70 1.00 1750 1.28 22.0 57 1/2 7/8 6.3 25.6 2.0 67 KEC70-6 8.98 3 231 0.70 1.00 1750 1.25 22.0 57 5/8 7/8 9.4 38.3 3.0 74 KEC10-8 1.17 1 33 0.35 0.50 1370 0.32 16.0 44 1/2 1/2 1.4 4.4 0.5 27 KEC15-8 1.52 1 33 0.35 0.50 1370 0.32 16.0 44 1/2 1/2 1.9 5.2 0.6 28 KEC20-8 1.74 1 33 0.35 0.50 1370 0.33 16.0 44 1/2 5/8 2.5 7.2 0.8 33 KEC25-8 2.06 1 77 0.70 1.00 1750 0.44 22.0 52 1/2 5/8 2.5 7.2 0.8 33 8mm KEC30-8 2.75 1 77 0.70 1.00 1750 0.43 22.0 52 1/2 7/8 3.8 10.8 1.2 35 KEC35-8 3.30 2 66 0.35 0.50 1370 0.65 16.0 47 1/2 7/8 4.3 13.1 1.4 47 KEC40-8 3.98 2 154 0.70 1.00 1750 0.86 22.0 55 1/2 7/8 4.3 13.1 1.4 47 KEC45-8 5.31 2 154 0.70 1.00 1750 0.86 22.0 55 1/2 7/8 6.5 19.7 2.1 53 KEC55-8 6.01 3 231 0.70 1.00 1750 1.31 22.0 57 1/2 7/8 6.3 19.7 2.0 67 KEC70-8 7.97 3 231 0.70 1.00 1750 1.29 22.0 57 5/8 7/8 9.4 29.5 3.0 74 Weight Notes: Rating conditions - The duties shown in this brochure are at EN 328 Standard Condition 2 (-8 C saturated suction temperature, 0 C air entering). To select at your application conditions please use the Kelvion Searle Selection Software or contact your local sales representative for more information. * DT1 is the difference between the entering air temperature and the saturated suction temperature at the outlet of the cooler. ** Noise levels are based on free field conditions at a distance of 3m. Actual noise levels will depend upon cold store construction, store loading and the number of coolers installed. *** Terminal air velocity 0.25m/s, free air conditions at 10 C. throw cannot be considered an absolute value because many factors have a substantial effect on the distance achieved. Electric defrost data Electric Defrost Model 230V-1PH-50/60Hz Standard Coil Pan Total kw kw kw KEC10-* 0.68 0.34 1.02 KEC15-* 0.68 0.34 1.02 KEC20-* 0.92 0.46 1.38 KEC25-* 0.92 0.46 1.38 KEC25-* 0.92 0.46 1.38 KEC35-* 1.6 0.8 2.4 KEC40-* 1.6 0.8 2.4 KEC45-* 1.6 0.8 2.4 KEC55-* 2.4 1.2 3.6 KEC70-* 2.4 1.2 3.6
CO2 KEC Direct expansion LX (57bar), MX (80 bar), HX (90 bar) Fin spacing 4mm 6mm Model Capacity 8K R744 * No. of fans Motor details 230V - 1ph - 50Hz Fan data Connections Power input FLC per fan SC per fan Speed Volume throw *** Noise level @ 3m ** Inlet Outlet Internal volume Surface area Ref Charge kw W amps amps RPM m 3 /s kg db(a) dm 3 m 2 kg kw KEC-*X10-4 1.40 1 33 0.35 0.50 1370 0.28 16 44 1/2" 5/8" 2.0 7.5 0.9 29 KEC-*X15-4 1.70 1 33 0.35 0.50 1370 0.28 16 44 1/2" 5/8" 2.0 10.0 0.9 30 KEC-*X20-4 2.00 1 33 0.35 0.50 1370 0.29 16 44 1/2" 5/8" 3.0 13.7 1.3 37 KEC-*X25-4 2.50 1 77 0.70 1.00 1750 0.42 22 52 1/2" 5/8" 3.0 13.7 1.3 37 KEC-*X30-4 3.10 1 77 0.70 1.00 1750 0.40 22 52 1/2" 5/8" 4.0 20.5 1.7 41 KEC-*X35-4 4.00 2 66 0.35 0.50 1370 0.58 16 47 1/2" 5/8" 5.0 24.9 2.2 54 KEC-*X40-4 5.20 2 154 0.70 1.00 1750 0.83 22 55 1/2" 5/8" 5.0 24.9 2.2 54 KEC-*X45-4 6.90 2 154 0.70 1.00 1750 0.81 22 55 1/2" 5/8" 7.0 37.3 3.0 62 KEC-*X55-4 8.60 3 231 0.70 1.00 1750 1.25 22 57 1/2" 5/8" 6.0 37.3 2.6 76 KEC-*X70-4 9.90 3 231 0.70 1.00 1750 1.21 22 57 1/2" 5/8" 9.0 56.0 3.9 89 KEC-*X10-6 1.20 1 33 0.35 0.50 1370 0.31 16 44 1/2" 5/8" 2.0 5.1 0.9 29 KEC-*X15-6 1.50 1 33 0.35 0.50 1370 0.31 16 44 1/2" 5/8" 2.0 6.8 0.9 30 KEC-*X20-6 1.80 1 33 0.35 0.50 1370 0.32 16 44 1/2" 5/8" 3.0 9.4 1.3 37 KEC-*X25-6 2.10 1 77 0.70 1.00 1750 0.43 22 52 1/2" 5/8" 3.0 9.4 1.3 37 KEC-*X30-6 2.70 1 77 0.70 1.00 1750 0.42 22 52 1/2" 5/8" 4.0 14.0 1.7 41 KEC-*X35-6 3.40 2 66 0.35 0.50 1370 0.63 16 47 1/2" 5/8" 5.0 17.0 2.2 54 KEC-*X40-6 4.20 2 154 0.70 1.00 1750 0.85 22 55 1/2" 5/8" 5.0 17.0 2.2 54 KEC-*X45-6 6.00 2 154 0.70 1.00 1750 0.83 22 55 1/2" 5/8" 7.0 25.5 3.0 62 KEC-*X55-6 7.00 3 231 0.70 1.00 1750 1.28 22 57 1/2" 5/8" 6.0 25.5 2.6 76 KEC-*X70-6 8.40 3 231 0.70 1.00 1750 1.25 22 57 1/2" 5/8" 9.0 38.3 3.9 89 KEC-*X10-8 0.90 1 33 0.35 0.50 1370 0.32 16 44 1/2" 5/8" 2.0 3.9 0.9 29 KEC-*X15-8 1.30 1 33 0.35 0.50 1370 0.32 16 44 1/2" 5/8" 2.0 5.2 0.9 30 KEC-*X20-8 1.60 1 33 0.35 0.50 1370 0.33 16 44 1/2" 5/8" 3.0 7.2 1.3 37 KEC-*X25-8 1.80 1 77 0.70 1.00 1750 0.44 22 52 1/2" 5/8" 3.0 7.2 1.3 37 8mm KEC-*X30-8 2.40 1 77 0.70 1.00 1750 0.43 22 52 1/2" 5/8" 4.0 10.8 1.7 41 KEC-*X35-8 3.00 2 66 0.35 0.50 1370 0.65 16 47 1/2" 5/8" 5.0 13.1 2.2 54 KEC-*X40-8 3.60 2 154 0.70 1.00 1750 0.86 22 55 1/2" 5/8" 5.0 13.1 2.2 54 KEC-*X45-8 5.20 2 154 0.70 1.00 1750 0.86 22 55 1/2" 5/8" 7.0 19.6 3.0 62 KEC-*X55-8 6.10 3 231 0.70 1.00 1750 1.31 22 57 1/2" 5/8" 6.0 19.6 2.6 76 KEC-*X70-8 7.90 3 231 0.70 1.00 1750 1.29 22 57 1/2" 5/8" 9.0 29.4 3.9 89 Weight
CO2 KEC Pumped LP (57bar), MP (80 bar) Fin spacing 4mm 6mm Model Capacity 8K R744 * No. of fans Motor details 230V - 1ph - 50Hz Fan data Connections Power input FLC per fan SC per fan Speed Volume throw *** Noise level @ 3 ** Inlet Outlet Internal volume Surface area Ref Charge kw W amps amps RPM m 3 /s kg db(a) dm 3 m 2 kg kw KEC-*P10-4 1.80 1 33 0.35 0.5 1370 0.28 16 44 5/8" 7/8" 2.0 7.5 1.2 29 KEC-*P15-4 2.09 1 33 0.35 0.5 1370 0.28 16 44 5/8" 7/8" 2.0 10.0 1.2 30 KEC-*P20-4 2.33 1 33 0.35 0.5 1370 0.29 16 44 5/8" 7/8" 3.0 13.7 1.8 37 KEC-*P25-4 2.97 1 77 0.7 1 1750 0.42 22 52 5/8" 7/8" 3.0 13.7 1.8 37 KEC-*P30-4 3.57 1 77 0.7 1 1750 0.40 22 52 5/8" 7/8" 4.0 20.5 2.4 41 KEC-*P35-4 4.70 2 66 0.35 0.5 1370 0.58 16 47 5/8" 7/8" 5.0 24.9 3.0 54 KEC-*P40-4 6.35 2 154 0.7 1 1750 0.83 22 55 5/8" 7/8" 5.0 24.9 3.0 54 KEC-*P45-4 7.91 2 154 0.7 1 1750 0.81 22 55 5/8" 7/8" 7.0 37.3 4.2 62 KEC-*P55-4 10.16 3 231 0.7 1 1750 1.25 22 57 5/8" 7/8" 6.0 37.3 3.6 76 KEC-*P70-4 11.36 3 231 0.7 1 1750 1.21 22 57 5/8" 7/8" 9.0 56.0 5.4 89 KEC-*P10-6 1.55 1 33 0.35 0.5 1370 0.31 16 44 5/8" 7/8" 2.0 5.1 1.2 29 KEC-*P15-6 1.85 1 33 0.35 0.5 1370 0.31 16 44 5/8" 7/8" 2.0 6.8 1.2 30 KEC-*P20-6 2.10 1 33 0.35 0.5 1370 0.32 16 44 5/8" 7/8" 3.0 9.4 1.8 37 KEC-*P25-6 2.49 1 77 0.7 1 1750 0.43 22 52 5/8" 7/8" 3.0 9.4 1.8 37 KEC-*P30-6 3.11 1 77 0.7 1 1750 0.42 22 52 5/8" 7/8" 4.0 14.0 2.4 41 KEC-*P35-6 4.00 2 66 0.35 0.5 1370 0.63 16 47 5/8" 7/8" 5.0 17.0 3.0 54 KEC-*P40-6 5.12 2 154 0.7 1 1750 0.85 22 55 5/8" 7/8" 5.0 17.0 3.0 54 KEC-*P45-6 6.88 2 154 0.7 1 1750 0.83 22 55 5/8" 7/8" 7.0 25.5 4.2 62 KEC-*P55-6 8.27 3 231 0.7 1 1750 1.28 22 57 5/8" 7/8" 6.0 25.5 3.6 76 KEC-*P70-6 9.64 3 231 0.7 1 1750 1.25 22 57 5/8" 7/8" 9.0 38.3 5.4 89 KEC-*P10-8 1.16 1 33 0.35 0.5 1370 0.32 16 44 5/8" 7/8" 2.0 3.9 1.2 29 KEC-*P15-8 1.60 1 33 0.35 0.5 1370 0.32 16 44 5/8" 7/8" 2.0 5.2 1.2 30 KEC-*P20-8 1.87 1 33 0.35 0.5 1370 0.33 16 44 5/8" 7/8" 3.0 7.2 1.8 37 KEC-*P25-8 2.14 1 77 0.7 1 1750 0.44 22 52 5/8" 7/8" 3.0 7.2 1.8 37 8mm KEC-*P30-8 2.76 1 77 0.7 1 1750 0.43 22 52 5/8" 7/8" 4.0 10.8 2.4 41 KEC-*P35-8 3.53 2 66 0.35 0.5 1370 0.65 16 47 5/8" 7/8" 5.0 13.1 3.0 54 KEC-*P40-8 4.39 2 154 0.7 1 1750 0.86 22 55 5/8" 7/8" 5.0 13.1 3.0 54 KEC-*P45-8 5.96 2 154 0.7 1 1750 0.86 22 55 5/8" 7/8" 7.0 19.6 4.2 62 KEC-*P55-8 7.21 3 231 0.7 1 1750 1.31 22 57 5/8" 7/8" 6.0 19.6 3.6 76 KEC-*P70-8 9.06 3 231 0.7 1 1750 1.29 22 57 5/8" 7/8" 9.0 29.4 5.4 89 Weight Notes: Rating conditions - The duties shown in this brochure are at EN 328 Standard Condition 2 (-8 C saturated suction temperature, 0 C air entering). To select at your application conditions please use the Kelvion Searle Selection Software or contact your local sales representative for more information. * DT1 is the difference between the entering air temperature and the saturated suction temperature at the outlet of the cooler. ** Noise levels are based on free field conditions at a distance of 3m. Actual noise levels will depend upon cold store construction, store loading and the number of coolers installed. *** Terminal air velocity 0.25m/s, free air conditions at 10 C. throw cannot be considered an absolute value because many factors have a substantial effect on the distance achieved.
KEC - dimension drawings KEC 10-15 726 O/A length 700 Casework Hanging bracket for all KEC Models 133 133 F Heater removal 500mm (either end) 524 O/A WIDTH 489 MTG CTRS Coil conns end 1 D/Conn 48 A MTG CTRS 352.5 352.5 705 Drain pan 46 25 KEC 20-30 17.5 15 R6.5 876 O/A length 30 850 Casework 133 133 444 Casework 275 min F Heater removal 600mm (either end) 1 D/Conn 48 427.5 427.5 393 412 461 O/A Height 855 Drain pan 50 KEC 35-45 460 Drain pan 1326 O/A length 1300 Casework 133 1035 MTG CTRS 133 Model Dim A F Heater removal 600mm (either end) KEC10 435 KEC15 435 KEC20 585 KEC25 585 KEC30 585 KEC35 1035 48 1 D/Conn 377.5 377.5 653 653 1305 Drain pan KEC40 1035 KEC45 1035 KEC55 1535 KEC70 1535 KEC 55-70 1826 O/A length 1800 Casework 133 1535 MTG CTRS 133 F Heater removal 600mm (either end) 1 D/Conn 48 427.5 475 475 427.5 1805 Drain pan Note: All dimensions in mm, F = Min heat Withdrawal
Searle KME air cooler MAKING REFRIGERATION GREENER The Searle KME cooler range from Kelvion is ideally suited to large cold rooms and small warehouses where an efficient cooling solution is required. The KME can also be used for industrial food processing and agricultural applications. To find the optimum model from the range it is recommended to use the Kelvion Searle Selection Software. The KME has developed as a green life cycle approach to the design and manufacture of refrigeration components. This ensures that in addition to looking as good in use as they do in our catalogue, our units have a worthwhile monetary value at the end of their service life. Effectively, we have engineered eventual recycling into our products when they are still on the drawing board. Defrost - Hot gas or electric defrost in coil and tray. Alternative Fin Materials - Epoxy (AV), Aluminium Magnesium (ALMG) Copper (CU), Electro-tinned copper (ET). streamer - To extend the air throw of the standard 400mm fanset. Forkguard - Guard system to prevent accidental damage from forklift trucks or similar when sitting the cooler at low level. Axial fans - For significantly increased air throw or for external pressure of 65Pa. Peripheral Heaters - Available in conjunction with axial fans recommended for applications below 0 C. Heavy Electric Defrost - Comprises of additional coil block heaters to increase the total defrost load by approximately 40%.
Features Comprises of 11 models Available in 4mm, 6mm and 8mm fin spacings 1, 2, 3 or 4 fan configurations Eurovent certified
Searle KME air cooler KME RANGE PRODUCT PROFILE 1 CASEWORK 3 COIL The products consist of specially coated white RAL 9010 galvanised steel casework, designed for maximum durability in the harshest environments. Removable side panels help to ensure accessibility during maintenance or installation operations is quick and simple. The drain tray is also fabricated from galvanised steel, and is shipped separately inside the packing case. We would advise the drain tray is loosely fitted onto the cooler with the fixing screws before lifting the cooler into position from underneath. All KME units feature the unique D fin, specially developed a using ½ inch diameter tube with an extended rifle bore inner surface. This maximises performance, providing high efficiency heat transfer and a secondary surface for frost deposits, to extend periods between defrosts. Fins can be aluminium, vinyl coated aluminium, copper or electro-tinned copper. Manufactured from ½ Tube Tube Pitch Across flow: 43mm Tube Pitch In Direction of flow: 37.2mm Fin Spacing (s): 4mm, 6mm and 8mm Light Ripple and Heater Holes 2 FANS CO2 OPTION The KME users trusted and robust AC and EC fanset options. These have been extensively tested to ensure function and performance is delivered throughout the life cycle of the product. Fan diameter: 400mm 4 Bladed aluminium propeller Wire guard in (Black) Fan Rotation Clockwise when facing air stream Motor Rating IP54 Optional fan plate heater to prevent fan blade contact with frost build up at low temperatures. Axial fan to 65 Pa ESP Kelvion is constantly working towards product improvements that increase output, efficiency and reliability, while containing or reducing capital and operating costs and the impact on the environment. As a typical example, the introduction of the use of CO2 and natural hydrocarbons as refrigerants in Kelvion evaporators, is a much greener alternative to synthetic refrigerants. The evaporators are optimised specifically for these refrigerants, giving end users confidence in the getting the right product that delivers the required performance throughout the products life cycle. KME Refrigerant data Refrigeration R404A R134a R507A R407A/F R407C Capacity factor (dew point, DT1) 1.00 0.91 0.97 1.24* 1.26* Refrigerant charge density (kg/dm 3 ) 0.312 0.338 0.313 0.332 0.332 * Capacity factors for refrigerants with high glide apply only at the nominal rating condition. Refrigerant charge densities are based on 25% of the internal volume being liquid.
1 5 3 6 2 4 Drain Tray 4 5 End plates 6 Junction box Nomenclature KME 140-6 L - AL - 3PH - EC Range: KME, KME-LP, KME-MP, KME-LX, KME-MX, KME-HX Model: 50, 60, 80, 95, 115, 140, 175, 232, 282, 352, 353 Fin Spacing: 4mm, 6mm, 8mm (Type for CO2): X = direct expansion, L = 57 bar, M = 80 bar, H = 90 bar Defrost: No defrost, L = Standard Electric defrost, HGD = Hot Gas Coil & tray, HGE = Hot Gas Coil & Electric tray. Each gas defrost option is followed with either an A/ B / C /D, to designate the circuiting option. Fin material: AL = Aluminium Electric supply: Blank = 1PH, 3PH Fan set option: Blank = Standard 400mm fanset, Ax = Axial, EC = EC fanset Capacities: R404A: 5.7 kw - 63.6 kw CO2: 5.9 kw - 49.9 kw
KME Selection Data Fin spacing 4mm Model Capacity 8K DT1 R404A * Dia No. of fans Motor details Fan data Connections Power input Speed Volume throw std *** throw thrower *** Noise level @ 3m ** Inlet Outlet Internal volume Surface area Ref Charge kw W RPM m 3 /s m m db(a) dm 3 m 2 kg kw KME50-4 7.36 400 1 200 1410 0.89 17 26 60 1/2 1 1/8 6.7 37.8 2.1 85 KME60-4 8.71 400 1 200 1410 0.96 19 29 60 5/8 1 1/8 9.5 56 2.9 112 KME80-4 12.10 400 2 400 1410 1.89 19 29 63 5/8 1 1/8 8.4 50.4 2.6 129 KME95-4 14.84 400 2 400 1410 1.78 17 26 63 5/8 1 1/8 12.5 75.6 3.9 139 KME115-4 18.40 400 3 600 1410 2.83 19 29 65 7/8 1 3/8 12.2 75.6 3.8 170 KME140-4 22.31 400 3 600 1410 2.68 17 26 65 7/8 1 3/8 18.4 113.3 5.6 195 KME175-4 27.95 400 4 800 1410 3.45 17 26 66 7/8 1 3/8 21.6 134.3 6.6 217 KME232-4 39.87 630 2-890 5.40 19 N/A 61 3/4 1 5/8 25.6 151 8.0 312 KME282-4 47.61 630 2-890 5.20 18 N/A 61 3/4 1 5/8 37.8 227 11.8 346 KME352-4 60.96 630 2-1330 6.80 24 N/A 71 3/4 1 5/8 45.2 269 14.1 365 Weight KME353-4 63.57 630 3-890 7.20 17 N/A 61 3/4 1 5/8 45.2 269 14.1 406 6mm 8mm KME50-6 6.20 400 1 200 1410 0.98 18 27 60 1/2 1 1/8 6.7 25.8 2.1 83 KME60-6 7.45 400 1 200 1410 1.01 20 31 60 5/8 1 1/8 9.5 38.3 2.9 109 KME80-6 9.74 400 2 400 1410 2.00 20 31 63 5/8 1 1/8 8.4 34.4 2.6 127 KME95-6 12.51 400 2 400 1410 1.95 18 27 63 5/8 1 1/8 12.5 51.7 3.9 135 KME115-6 14.61 400 3 600 1410 3.00 20 31 65 7/8 1 3/8 12.2 51.7 3.8 167 KME140-6 18.75 400 3 600 1410 2.93 18 27 65 7/8 1 3/8 18.4 77.5 5.6 191 KME175-6 23.92 400 4 800 1410 3.86 19 27 66 7/8 1 3/8 21.6 91.9 6.6 214 KME232-6 30.82 630 2-890 5.80 20 N/A 61 3/4 1 3/8 25.6 151 8.0 296 KME282-6 40.34 630 2-890 5.60 19 N/A 61 3/4 1 5/8 37.8 227 11.8 323 KME352-6 50.48 630 2-1330 7.30 25 N/A 71 3/4 1 5/8 45.2 269 14.1 338 KME353-6 54.15 630 3-890 8.20 19 N/A 61 3/4 1 5/8 45.2 269 14.1 379 KME50-8 5.70 400 1 200 1410 1.02 19 29 60 1/2 1 1/8 6.7 19.9 2.1 84 KME60-8 6.81 400 1 200 1410 1.03 22 34 60 5/8 1 1/8 9.5 29.4 2.9 110 KME80-8 8.58 400 2 400 1410 2.05 22 34 63 5/8 1 1/8 8.4 26.5 2.6 127 KME95-8 11.47 400 2 400 1410 2.04 19 29 63 5/8 1 1/8 12.5 39.7 3.9 136 KME115-8 13.0 400 3 600 1410 3.07 22 34 65 7/8 1 3/8 12.2 39.7 3.8 167 KME140-8 17.4 400 3 600 1410 3.06 19 29 65 7/8 1 3/8 18.4 59.6 5.6 190 KME175-8 22.0 400 4 800 1410 4.06 19 29 66 7/8 1 3/8 21.6 70.6 6.6 212 KME232-8 26.08 630 2-890 6.06 21 N/A 61 3/4 1 1/8 25.6 151 8.0 289 KME282-8 34.59 630 2-890 5.98 21 N/A 61 3/4 1 1/8 37.8 227 11.8 313 KME352-8 41.30 630 2-1330 7.42 26 N/A 71 3/4 1 3/8" 45.2 269 14.1 326 KME353-8 46.84 630 3-890 8.80 21 N/A 61 3/4 1 1/8 45.2 269 14.1 367 Notes: Rating conditions - The duties shown in this brochure are at EN 328 Standard Condition 2 (-8 C saturated suction temperature, 0 C air entering). To select at your application conditions please use the Kelvion Searle Selection Software or contact your local sales representative for more information. * DT1 is the difference between the entering air temperature and the saturated suction temperature at the outlet of the cooler. ** Noise levels are based on free field conditions at a distance of 3m. Actual noise levels will depend upon cold store construction, store loading and the number of coolers installed. *** Terminal air velocity 0.25m/s, free air conditions at 10 C. throw cannot be considered an absolute value because many factors have a substantial effect on the distance achieved.
CO2 KME Direct expansion LX (57bar), MX (80 bar), HX (90 bar) Fin spacing 4mm Model Capacity 8K DT1 R404A * Dia No. of fans Motor details Fan data Connections Power input Speed Volume throw std *** throw thrower *** Noise level @ 3m ** Inlet Outlet Internal volume Surface area Ref Charge kw W RPM m 3 /s m m db(a) dm 3 m 2 kg kw KME-*X50-4-1PH 7.30 400 1 200 1410 0.89 17 26 60 1/2" 5/8" 6.7 37.8 3.0 94 KME-*X60-4-1PH 9.10 400 1 200 1410 0.96 19 29 60 1/2" 5/8" 9.5 56 4.3 125 KME-*X80-4-1PH 11.70 400 2 400 1410 1.89 19 29 63 1/2" 5/8" 8.4 50.4 3.9 140 KME-*X95-4-1PH 14.90 400 2 400 1410 1.78 17 26 63 1/2" 5/8" 12.5 75.6 5.6 156 KME-*X115-4-1PH 18.50 400 3 600 1410 2.83 19 29 65 1/2" 7/8" 12.2 75.6 5.2 187 KME-*X140-4-1PH 22.90 400 3 600 1410 2.68 17 26 65 1/2" 7/8" 18.4 113.3 7.7 221 KME-*X175-4-1PH 27.90 400 4 800 1410 3.45 17 26 66 1/2" 7/8" 21.6 134.3 9.5 248 KME-*X232-4-3PH 31.29 630 2 1200 890 5.4 19 N/A 61 5/8" 1 1/8" 25.6 151 11.5 312 KME-*X282-4-3PH 38.96 630 2 1200 890 5.2 18 N/A 61 5/8" 1 1/8" 37.8 227 16.9 346 KME-*X352-4-3PH 48.11 630 2 2500 1330 6.8 24 N/A 71 5/8" 1 1/8" 45.2 269 20.2 365 Weight KME-*X353-4-3PH 49.94 630 3 1200 890 7.2 17 N/A 61 5/8" 1 1/8" 45.2 269 20.2 406 6mm 8mm KME-*X50-6-1PH 6.60 400 1 200 1410 0.98 18 27 60 1/2" 5/8" 6.7 25.8 3.0 92 KME-*X60-6-1PH 7.60 400 1 200 1410 1.01 20 31 60 1/2" 5/8" 9.5 38.3 4.3 122 KME-*X80-6-1PH 9.90 400 2 400 1410 2.00 20 31 63 1/2" 5/8" 8.4 34.4 3.9 138 KME-*X95-6-1PH 13.40 400 2 400 1410 1.95 18 27 63 1/2" 5/8" 12.5 51.7 5.6 152 KME-*X115-6-1PH 15.60 400 3 600 1410 3.00 20 31 65 1/2" 7/8" 12.2 51.7 5.2 184 KME-*X140-6-1PH 19.00 400 3 600 1410 2.93 18 27 65 1/2" 7/8" 18.4 77.5 7.7 217 KME-*X175-6-1PH 25.60 400 4 800 1410 3.86 19 27 66 1/2" 7/8" 21.6 91.9 9.5 245 KME-*X232-6-3PH 26.46 630 2 1200 890 5.80 20 N/A 61 5/8" 7/8" 25.6 151 11.5 296 KME-*X282-6-3PH 32.04 630 2 1200 890 5.60 19 N/A 61 5/8" 7/8" 37.8 227 16.9 32 KME-*X352-6-3PH 42.70 630 2 2500 1330 7.30 25 N/A 71 5/8" 1 1/8" 45.2 269 20.2 338 KME-*X353-6-3PH 46.42 630 3 1200 890 8.20 19 N/A 61 5/8" 1 1/8" 45.2 269 20.2 379 KMe-*X50-8-1PH 5.90 400 1 200 1410 1.02 19 29 60 1/2" 5/8" 6.7 19.9 3.0 93 KMe-*X60-8-1PH 6.90 400 1 200 1410 1.03 22 34 60 1/2" 5/8" 9.5 29.4 4.3 123 KMe-*X80-8-1PH 8.90 400 2 400 1410 2.05 22 34 63 1/2" 5/8" 8.4 26.5 3.9 138 KMe-*X95-8-1PH 11.80 400 2 400 1410 2.04 19 29 63 1/2" 5/8" 12.5 39.7 5.6 153 KMe-*X115-8-1PH 13.40 400 3 600 1410 3.07 22 34 65 1/2" 7/8" 12.2 39.7 5.2 183 KMe-*X140-8-1PH 17.60 400 3 600 1410 3.06 19 29 65 1/2" 7/8" 18.4 59.6 7.7 216 KMe-*X175-8-1PH 23.00 400 4 800 1410 4.06 19 29 66 1/2" 7/8" 21.6 70.6 9.5 243 KMe-*X232-8-3PH 22.94 630 2 1200 890 6.10 21 N/A 61 5/8" 7/8" 25.6 151 11.5 289 KMe-*X282-8-3PH 29.98 630 2 1200 890 6.00 21 N/A 61 5/8" 7/8" 37.8 227 16.9 313 KMe-*X352-8-3PH 37.16 630 2 2500 1330 7.40 26 N/A 71 5/8" 1 1/8" 45.2 269 20.2 236 KMe-*X353-8-3PH 42.58 630 3 1200 890 8.80 21 N/A 61 5/8" 1 1/8" 45.2 269 20.2 367 Note: Weights in the table above apply to MX and HX models. LX model weights are 3% lower. Pump circulation data available on request
CO2 KME Pumped LP (57 bar), MP (80 bar) Fin spacing 4mm Model Capacity 8K DT1 R404A * Dia No. of fans Motor details Fan data Connections Power input Speed Volume throw std *** throw thrower *** Noise level @ 3m ** Inlet Outlet Internal volume Surface area Ref Charge kw W RPM m 3 /s m m db(a) dm 3 m 2 kg kw KME-*P50-4-1PH 8.61 400 1 200 1410 0.89 17 26 60 5/8" 7/8" 6.7 37.8 4.3 94 KME-*P60-4-1PH 10.74 400 1 200 1410 0.96 19 29 60 5/8" 7/8" 9.5 56 6.2 125 KME-*P80-4-1PH 13.81 400 2 400 1410 1.89 19 29 63 5/8" 7/8" 8.4 50.4 5.6 140 KME-*P95-4-1PH 17.58 400 2 400 1410 1.78 17 26 63 5/8" 7/8" 12.5 75.6 8.0 156 KME-*P115-4-1PH 21.83 400 3 600 1410 2.83 19 29 65 5/8" 1-1/8" 12.2 75.6 7.4 187 KME-*P140-4-1PH 27.02 400 3 600 1410 2.68 17 26 65 5/8" 1-1/8" 18.4 113.3 11.1 221 KME-*P175-4-1PH 32.92 400 4 800 1410 3.45 17 26 66 5/8" 1-1/8" 21.6 134.3 13.6 248 KME-*P232-4-3PH 36.92 630 2 1200 890 5.4 19 N/A 61 7/8" 1-3/8" 25.6 151 16.5 312 KME-*P282-4-3PH 45.97 630 2 1200 890 5.2 18 N/A 61 7/8" 1-3/8" 37.8 227 24.4 346 KME-*P352-4-3PH 56.77 630 2 2500 1330 6.8 24 N/A 71 7/8" 1-3/8" 45.2 269 29.1 365 Weight KME-*X353-4-3PH 58.93 630 3 1200 890 7.2 17 N/A 61 7/8" 1-3/8" 45.2 269 29.1 406 6mm 8mm KME-*P50-6-1PH 7.79 400 1 200 1410 0.98 18 27 60 5/8" 7/8" 6.7 25.8 4.3 92 KME-*P60-6-1PH 8.97 400 1 200 1410 1.01 20 31 60 5/8" 7/8" 9.5 38.3 6.2 122 KME-*P80-6-1PH 11.68 400 2 400 1410 2.00 20 31 63 5/8" 7/8" 8.4 34.4 5.6 138 KME-*P95-6-1PH 15.81 400 2 400 1410 1.95 18 27 63 5/8" 7/8" 12.5 51.7 8.0 152 KME-*P115-6-1PH 18.41 400 3 600 1410 3.00 20 31 65 5/8" 1-1/8" 12.2 51.7 7.4 184 KME-*P140-6-1PH 22.42 400 3 600 1410 2.93 18 27 65 5/8" 1-1/8" 18.4 77.5 11.1 217 KME-*P175-6-1PH 30.21 400 4 800 1410 3.86 19 27 66 5/8" 1-1/8" 21.6 91.9 13.6 245 KME-*P232-6-3PH 31.22 630 2 1200 890 5.80 20 N/A 61 7/8" 1-3/8" 25.6 151 16.5 296 KME-*P282-6-3PH 37.81 630 2 1200 890 5.60 19 N/A 61 7/8" 1-3/8" 37.8 227 24.4 32 KME-*P352-6-3PH 50.39 630 2 2500 1330 7.30 25 N/A 71 7/8" 1-3/8" 45.2 269 29.1 338 KME-*X353-6-3PH 54.78 630 3 1200 890 8.20 19 N/A 61 7/8" 1-3/8" 45.2 269 29.1 379 KMe-*X50-8-1PH 6.96 400 1 200 1410 1.02 19 29 60 5/8" 7/8" 6.7 19.9 4.3 93 KMe-*X60-8-1PH 8.14 400 1 200 1410 1.03 22 34 60 5/8" 7/8" 9.5 29.4 6.2 123 KMe-*X80-8-1PH 10.50 400 2 400 1410 2.05 22 34 63 5/8" 7/8" 8.4 26.5 5.6 138 KMe-*X95-8-1PH 13.92 400 2 400 1410 2.04 19 29 63 5/8" 7/8" 12.5 39.7 8.0 153 KMe-*X115-8-1PH 15.81 400 3 600 1410 3.07 22 34 65 5/8" 1-1/8" 12.2 39.7 7.4 183 KMe-*X140-8-1PH 20.77 400 3 600 1410 3.06 19 29 65 5/8" 1-1/8" 18.4 59.6 11.1 216 KMe-*X175-8-1PH 27.14 400 4 800 1410 4.06 19 29 66 5/8" 1-1/8" 21.6 70.6 13.6 243 KMe-*X232-8-3PH 27.07 630 2 1200 890 6.10 21 N/A 61 7/8" 1-3/8" 25.6 151 16.5 289 KMe-*X282-8-3PH 35.38 630 2 1200 890 6.00 21 N/A 61 7/8" 1-3/8" 37.8 227 24.4 313 KMe-*X352-8-3PH 43.85 630 2 2500 1330 7.40 26 N/A 71 7/8" 1-3/8" 45.2 269 29.1 236 KMe-*X353-8-3PH 50.24 630 3 1200 890 8.80 21 N/A 61 7/8" 1-3/8" 45.2 269 29.1 367 Notes: Rating conditions - The duties shown in this brochure are at EN 328 Standard Condition 2 (-8 C saturated suction temperature, 0 C air entering). To select at your application conditions please use the Kelvion Searle Selection Software or contact your local sales representative for more information. * DT1 is the difference between the entering air temperature and the saturated suction temperature at the outlet of the cooler. ** Noise levels are based on free field conditions at a distance of 3m. Actual noise levels will depend upon cold store construction, store loading and the number of coolers installed. *** Terminal air velocity 0.25m/s, free air conditions at 10 C. throw cannot be considered an absolute value because many factors have a substantial effect on the distance achieved.
KME Electric defrost Options & Fan Currents Model Electric defrost Fan set currents 400V - 3ph 230V - 1Ph 400V 3ph Standard Heavy duty 1Ph 3Ph Coil Pan Total Coil Total FLC per fan SC per fan FLC per fan SC per fan kw kw kw kw kw amps amps Amps Amps KME50-* 1.59 0.79 2.38 2.65 3.34 1.05 4.5 0.65 2.60 KME60-* 2.40 1.20 3.60 4.00 5.20 1.05 4.5 0.65 2.60 KME80-* 3.24 1.59 4.83 5.40 6.99 1.05 4.5 0.65 2.60 KME95-* 3.24 1.59 4.83 5.40 6.99 1.05 4.5 0.65 2.60 KME115-* 4.80 2.40 7.20 8.00 10.40 1.05 4.5 0.65 2.60 KME140-* 4.80 2.40 7.20 8.00 10.40 1.05 4.5 0.65 2.60 KME175-* 5.64 2.82 8.46 9.40 12.22 1.05 4.5 0.65 2.60 KME232-* 9.60 4.80 14.40 16.00 20.80 N/A N/A 1.2 4.0 KME282-* 9.60 4.80 14.40 16.00 20.80 N/A N/A 1.2 4.0 KME352-* 11.28 5.64 16.92 18.80 24.44 N/A N/A 2.6 10.0 KME353-* 11.28 5.64 16.92 18.80 24.44 N/A N/A 1.2 4.0
KME Dimensions KME 50 KME 60 1007 146 715 Mounting CTRS 146 1332 146 1040 Mounting CTRS 146 503.5 666 666 Heater removal 265 Heater removal 265 F F 505.5 47.5 668 53 1011 1336 KME 80, KMe 95 1682 146 1390 Mounting CTRS 146 KME 115, KMe 140 2357 146 2065 Mounting CTRS 146 541 600 541 503.5 675 675 503.5 Heater removal 265 Heater removal 265 F F 843 1686 53 1180.5 2361 47.6 KME 175 2732 146 1220 Mounting CTRS 1220 Mounting CTRS 146 466 600 600 600 466 Heater removal 265 F 1368 50 2736 A Mounting brackets details for all KME 17.5 535.5 445.5 17.5 17.5 708 446.5 17.5 45 Mounting CTRS 45 46 Mounting CTRS 46 46 17.5 574.9 555.1 575 555.1 15.2 30.4 Slot 13w x 25L 60 409.5 Drain connection 1 BSP(M) 64 409.5 Note: All dimensions in mm, F = Min heat Withdrawal
, KME Dimensions KME 232 &282 A 684 Heater removal 2357 146 2065 Mounting CTRS 146 44.4 18 546.5 Mounting CTRS 46 46 18 F 1094.1 1011.9 1074.1 2361 50 60 83 509.5 KME 352 2732 146 1220 Mounting CTRS 1220 Mounting CTRS 146 766 766 1200 Heater removal 533.3 F 1368 48.1 2736 KME 353 Model A F Heater removal F 146 2732 1220 Mounting CTRS 1220 Mounting CTRS 566 800 800 566 146 533.3 KM*50 350 805 KM*60 350 1200 KM*80 400 1200 KM*95 450 1200 KM*115 500 1200 KM*140 500 1200 KM*175 500 1200 KM*232 650 1200 KM*282 650 1200 KM*352 850 1200 KM*353 850 1200 1368 48.1 2736 Note: All dimensions in mm, F = Min heat Withdrawal
Searle DSR dual discharge RELIABLE AFFORDABLE ENGINEERING The Searle DSR range from Kelvion are ceiling mounted dual discharge coolers. With low profile and low air velocity, they have been designed for cold rooms, laboratories, food preparation areas and are available for either low or high temperature applications. The revolutionary design combines compactness with efficiency as well as accessibility and serviceability. The range calls on the experiences and designs of previous Searle coolers and provides the opportunity for close temperature control, with minimum energy demands from a compact, unobtrusive unit. junction box and refrigeration connections. Motors can be removed rapidly, due to a simple plug and socket connector and straightforward mounting plate. Units are designed to be flush-mounted to the ceiling low profile, low air velocity available for low temperature or high temperature applications Hot gas or electric defrost in coil and tray Access to components such as fans, motors and defrost heaters is simple and rapid through either the fan guard or heater covers/drain trays. Removable end panels enable easy access to the electrical
Features Comprises of 10 models Available in 3mm, 4mm and 6mm fin spacings 1, 2, 3 or 4 fan configurations Eurovent certified
Searle DSR dual discharge DSR RANGE PRODUCT PROFILE 1 CASEWORK 3 COIL All external metal work is finished in a white high gloss epoxy powder painted RAL 9010, applied by Kelvions modern electrostatic powder paint plant and is baked and cured at 180 C, ensuring an even and durable finish. The coil is supported by the coil end plates, which in turn is connected to the hanger brackets, This enables the cooler to be mounted flush to the ceiling for easy installation. The fan plate can be unbolted and reversed on site to alter the position of the drain connection. The drain trays are fitted underneath each coil block and are bolted to give easy access to the bottom for cleaning and maintenance. The coil assembly comprising of two identical mirror image coils positioned diametrically opposite each other and connected together by their tube plates, forming the chassis to which all the cladding panels and motor mounting beams are fixed. All coils are tubed up with 1/2 OD inner groove tube, has a grooved internal surface which provides a significantly increased surface area compared with plain tube plain tube. This increases the unit performance, and therefore value and efficiency. Manufactured from ½ Tube Tube Pitch Across flow: 43mm Tube Pitch In Direction of flow: 37.2mm Fin Spacing (s): 4mm, 6mm and 8mm Fin Features: Light Ripple and Heater Holes 2 FAN CO2 OPTION The Searle DSR cooler from Kelvion offer one piece 305mm diameter aluminium fan fitted to an AC motor 1-4 fans. 50 and 60 Hz fan options can be fitted on request as standard. Models DSR12 to 83: use a 305mm propeller-type five-bladed fan with a fractional dual speed 25W motor. A pitch of 24 is supplied for 50Hz applications and 20 for 60Hz. Models DSR100 & 116: are fitted with four-bladed 305mm fans and 70W single speed motors, running at 4 pole speed. A pitch of 32 is supplied for 50Hz applications and 26 for 60Hz. All DSR units utilise internally protected single phase squirrel cage motors of a totally enclosed, air cooled, permanent capacitor type in an IP44 enclosure. Utilising the same coil configuration as other Kelvion unit coolers, such as the KME and KEC, the DSR is the ideal solution for compact dual discharge CO2 applications. It is available with the following maximum operating pressures as standard: 57 Bar = KEC-LP 80 Bar = KEC - MP 90 Bar = KEC-HP. All units are factory tested to 1.43 x the rated maximum pressure to ensure the units are safe and leak free prior to delivery. DSR Refrigerant data Refrigeration R404A R134a R507A R407A/F R407C Capacity factor (dew point, DT1) 1.00 0.91 0.97 1.24* 1.26* Refrigerant charge density (kg/dm 3 ) 0.312 0.338 0.313 0.332 0.332 * Capacity factors for refrigerants with high glide apply only at the nominal rating condition. Refrigerant charge densities are based on 25% of the internal volume being liquid.
2 1 5 3 4 4 Drain Tray 6 5 End plates 6 Fan guard Nomenclature DSR 42-4 L AL Range: DSR, DSR-LP, DSR-MP, DSR-LX, DSR-MX, DSR-HX Model: 19, 22, 36, 42, 51, 62, 83, 100, 116 Fin Spacing: 3mm, 4mm, 6mm (Type for CO2): X = direct expansion Defrost: Blank = No defrost, L = electric defrost Fin material: AL = Aluminium (frequency) Blank = 50Hz, 60 = 60Hz Capacities: R404A: 1.25 kw - 15 kw CO2: 1.2 kw - 13 kw
DSR Selection Data High speed Fin spacing 3mm Model Capacity R404A * No. of fans Motor details 230V - 1ph - 50Hz Fan data Connections Power input FLC per fan SC per fan Speed Volume throw *** Noise level @ 3 ** Inlet Outlet Internal volume Surface area Ref Charge kw W amps amps RPM m 3 /s kg db(a) dm 3 m 2 kg kw DSR19-3 2.42 1 64 0.3 0.38 1325 0.31 11 49 1/2 5/8 2.5 18 0.78 11 DSR22-3 2.88 1 64 0.3 0.38 1325 0.3 10 49 1/2 5/8 3.75 27 1.02 10 DSR36-3 4.6 2 128 0.3 0.38 1325 0.6 12 51 1/2 7/8 4.22 33 1.36 12 DSR42-3 5.29 2 128 0.3 0.38 1325 0.58 11 51 1/2 7/8 6.34 49 2.04 11 DSR51-3 6.9 3 192 0.3 0.38 1325 0.9 12 54 1/2 7/8 6.14 49 1.97 12 DSR62-3 7.82 3 192 0.3 0.38 1325 0.86 11 54 1/2 1 1/8 9.22 74 2.96 11 DSR68-3 9.2 4 256 0.3 0.38 1325 1.2 12 55 1/2 1 1/8 8.07 66 2.59 12 DSR83-3 10.58 4 256 0.3 0.38 1325 1.15 11 55 1/2 1 1/8 12.1 98 3.89 11 DSR100-3 13 4 640 0.81 1.85 1420 1.65 10 60 5/8 1 3/8 12.1 98 3.89 10 DSR116-3 14.49 4 640 0.81 1.85 1420 1.47 9 60 5/8 1 3/8 18.14 148 5.53 9 DSR19-4 2.14 1 64 0.3 0.38 1325 0.31 11 49 1/2 5/8 2.5 14 0.78 11 Weight DSR22-4 2.67 1 64 0.3 0.38 1325 0.3 11 49 1/2 5/8 3.75 21 1.02 11 DSR36-4 4.06 2 128 0.3 0.38 1325 0.61 12 51 1/2 7/8 4.22 25 1.36 12 DSR42-4 4.95 2 128 0.3 0.38 1325 0.59 11 51 1/2 7/8 6.34 37 2.04 11 4mm DSR51-4 6.15 3 192 0.3 0.38 1325 0.92 12 54 1/2 7/8 6.14 37 1.97 12 DSR62-4 7.4 3 192 0.3 0.38 1325 0.88 11 54 1/2 1 1/8 9.22 56 2.96 11 DSR68-4 8.19 4 256 0.3 0.38 1325 1.22 12 55 1/2 1 1/8 8.07 50 2.59 12 DSR83-4 9.9 4 256 0.3 0.38 1325 1.18 11 55 1/2 1 1/8 12.1 75 3.89 11 DSR100-4 11.96 4 640 0.81 1.85 1420 1.72 11 60 5/8 1 3/8 12.1 75 3.89 11 DSR116-4 13.7 4 640 0.81 1.85 1420 1.56 10 60 5/8 1 3/8 18.14 112 5.53 10 DSR19-6 1.78 1 64 0.3 0.38 1325 0.32 11 49 1/2 5/8 2.5 9.4 0.78 11 DSR22-6 2.29 1 64 0.3 0.38 1325 0.31 10 49 1/2 5/8 3.75 14 1.02 10 DSR36-6 3.33 2 128 0.3 0.38 1325 0.63 12 51 1/2 7/8 4.22 17 1.36 12 DSR42-6 4.22 2 128 0.3 0.38 1325 0.61 11 51 1/2 7/8 6.34 26 2.04 11 6mm DSR51-6 4.95 3 192 0.3 0.38 1325 0.94 12 54 1/2 7/8 6.14 26 1.97 12 DSR62-6 6.35 3 192 0.3 0.38 1325 0.92 11 54 1/2 1 1/8 9.22 38 2.96 11 DSR68-6 6.68 4 256 0.3 0.38 1325 1.25 12 55 1/2 1 1/8 8.07 34 2.59 12 DSR83-6 8.44 4 256 0.3 0.38 1325 1.22 11 55 1/2 1 1/8 12.1 51 3.89 11 DSR100-6 10.05 4 640 0.81 1.85 1420 1.84 12 60 5/8 1 3/8 12.1 51 3.89 12 DSR116-6 12.31 4 640 0.81 1.85 1420 1.72 11 60 5/8 1 3/8 18.14 77 5.53 11 Notes: Rating conditions - The duties shown in this brochure are at EN 328 Standard Condition 2 (-8 C saturated suction temperature, 0 C air entering). To select at your application conditions please use the Kelvion Searle Selection Software or contact your local sales representative for more information. * DT1 is the difference between the entering air temperature and the saturated suction temperature at the outlet of the cooler. ** Noise levels are based on free field conditions at a distance of 3m. Actual noise levels will depend upon cold store construction, store loading and the number of coolers installed. *** Terminal air velocity 0.25m/s, free air conditions at 10 C. throw cannot be considered an absolute value because many factors have a substantial effect on the distance achieved.
DSR Selection Data Low speed Fin spacing 3mm Model Capacity R404A * No. of fans Motor details 230V - 1ph - 50Hz Fan data Connections Power input FLC per fan SC per fan Speed Volume throw *** Noise level @ 3 ** Inlet Outlet Internal volume Surface area Ref Charge kw W amps amps RPM m 3 /s kg db(a) dm 3 m 2 kg kw DSR19-3 1.61 1 26 0.14 0.14 750 0.17 7 34 1/2 5/8 2.5 18 0.78 7 DSR22-3 1.84 1 26 0.14 0.14 750 0.16 7 34 1/2 5/8 3.75 27 1.02 7 DSR36-3 2.99 2 52 0.14 0.14 750 0.33 8 37 1/2 7/8 4.22 33 1.36 8 DSR42-3 3.34 2 52 0.14 0.14 750 0.31 7 37 1/2 7/8 6.34 49 2.04 7 DSR51-3 4.49 3 78 0.14 0.14 750 0.49 8 39 1/2 7/8 6.14 49 1.97 8 DSR62-3 4.83 3 78 0.14 0.14 750 0.47 7 39 1/2 1 1/8 9.22 74 2.96 7 DSR68-3 5.98 4 104 0.14 0.14 750 0.66 8 40 1/2 1 1/8 8.07 66 2.59 8 DSR83-3 6.56 4 104 0.14 0.14 750 0.62 7 40 1/2 1 1/8 12.1 98 3.89 7 DSR100-3 8.63 4 376 0.87 1.98 800 0.93 7 48 5/8 1 3/8 12.1 98 3.89 7 DSR116-3 9.43 4 376 0.87 1.98 800 0.86 7 48 5/8 1 3/8 18.14 148 5.53 7 DSR19-4 1.46 1 26 0.14 0.14 750 0.17 7 34 1/2 5/8 2.5 14 0.78 7 Weight DSR22-4 1.67 1 26 0.14 0.14 750 0.16 7 34 1/2 5/8 3.75 21 1.02 7 DSR36-4 2.76 2 52 0.14 0.14 750 0.34 8 37 1/2 7/8 4.22 25 1.36 8 DSR42-4 3.18 2 52 0.14 0.14 750 0.32 7 37 1/2 7/8 6.34 37 2.04 7 4mm DSR51-4 4.06 3 78 0.14 0.14 750 0.5 8 39 1/2 7/8 6.14 37 1.97 8 DSR62-4 4.79 3 78 0.14 0.14 750 0.49 7 39 1/2 1 1/8 9.22 56 2.96 7 DSR68-4 5.52 4 104 0.14 0.14 750 0.67 8 40 1/2 1 1/8 8.07 50 2.59 8 DSR83-4 6.41 4 104 0.14 0.14 750 0.65 7 40 1/2 1 1/8 12.1 75 3.89 7 DSR100-4 8.23 4 376 0.87 1.98 800 0.98 7 48 5/8 1 3/8 12.1 75 3.89 7 DSR116-4 9.01 4 376 0.87 1.98 800 0.89 7 48 5/8 1 3/8 18.14 112 5.53 7 DSR19-6 1.25 1 26 0.14 0.14 750 0.17 7 34 1/2 5/8 2.5 9.4 0.78 7 DSR22-6 1.51 1 26 0.14 0.14 750 0.17 7 34 1/2 5/8 3.75 14 1.02 7 DSR36-6 2.29 2 52 0.14 0.14 750 0.34 8 37 1/2 7/8 4.22 17 1.36 8 DSR42-6 2.86 2 52 0.14 0.14 750 0.34 8 37 1/2 7/8 6.34 26 2.04 8 6mm DSR51-6 3.44 3 78 0.14 0.14 750 0.52 8 39 1/2 7/8 6.14 26 1.97 8 DSR62-6 4.22 3 78 0.14 0.14 750 0.5 8 39 1/2 1 1/8 9.22 38 2.96 8 DSR68-6 4.64 4 104 0.14 0.14 750 0.69 8 40 1/2 1 1/8 8.07 34 2.59 8 DSR83-6 5.64 4 104 0.14 0.14 750 0.67 8 40 1/2 1 1/8 12.1 51 3.89 8 DSR100-6 7.08 4 376 0.87 1.98 800 1.05 8 48 5/8 1 3/8 12.1 51 3.89 8 DSR116-6 8.44 4 376 0.87 1.98 800 0.98 7 48 5/8 1 3/8 18.14 77 5.53 7 Models 100 and 116 should only be operated at reduced speeds through the sales triac speed controller, which must be purchased separately. Duties shown are based on fan speeds of 800 rpm.
CO2 DSR Direct expansion LX (57bar), MX (80 bar), HX (90 bar) Capacity kw High Speed - HS Low Speed - LS Noise ** Fan Data Connections Model 8K DT1 No. FLC SC FLC SC Internal Speed throw Surface Weight R404A Power Power Volume of per per per per HS LS kw volume area * fans Input Input kw Inlet Outlet fan fan fan fan *** HS LS W amps amps W amps amps rpm db (A) db (A) HS LS HS LS dm 3 m 2 kg DSR-*X19 1.92 1.21 1 64 0.3 0.4 26 0.14 0.14 1300/750 49 34 0.31 0.17 11 7 3/8 5/8 3 5.95 58 DSR-*X22 2.47 1.52 1 64 0.3 0.4 26 0.14 0.14 1300/750 49 34 0.3 0.16 11 7 3/8 5/8 3 8.93 62 DSR-*X36 3.6 2.31 2 128 0.3 0.4 52 0.14 0.14 1300/750 51 37 0.61 0.34 12 8 1/2 5/8 4 10.82 82 DSR-*X42 4.77 2.95 2 128 0.3 0.4 52 0.14 0.14 1300/750 51 37 0.59 0.32 11 7 1/2 5/8 6 16.23 90 DSR-*X51 5.8 3.78 3 192 0.3 0.4 78 0.14 0.14 1300/750 54 39 0.92 0.5 12 8 1/2 5/8 5 16.23 109 DSR-*X62 7.02 4.61 3 192 0.3 0.4 78 0.14 0.14 1300/750 54 39 0.88 0.49 11 7 1/2 5/8 8 24.35 121 DSR-*X68 7.62 5.16 4 256 0.3 0.4 104 0.14 0.14 1300/750 55 40 1.22 0.67 12 8 1/2 5/8 7 21.64 139 DSR-*X83 9.61 6 4 256 0.3 0.4 104 0.14 0.14 1300/750 55 40 1.18 0.65 11 7 1/2 5/8 10 32.46 154 DSR-*X100 11.17 7.51 4 640 0.81 1.9 376 0.87 1.98 1400/800 60 48 1.72 0.98 11 7 1/2 5/8 11 36.07 166 DSR-*X116 13.06 8.64 4 640 0.81 1.9 376 0.87 1.98 1400/800 60 48 1.56 0.89 11 7 1/2 5/8 16 54.1 189 Notes: Rating conditions - The duties shown in this brochure are at EN 328 Standard Condition 2 (-8 C saturated suction temperature, 0 C air entering). To select at your application conditions please use the Kelvion Searle Selection Software or contact your local sales representative for more information. * DT1 is the difference between the entering air temperature and the saturated suction temperature at the outlet of the cooler. ** Noise levels are based on free field conditions at a distance of 3m. Actual noise levels will depend upon cold store construction, store loading and the number of coolers installed. *** Terminal air velocity 0.25m/s, free air conditions at 10 C. throw cannot be considered an absolute value because many factors have a substantial effect on the distance achieved.
CO2 DSR Pumped LP (57 bar), MP (80 bar) Model Capacity kw 8K DT1 R404A * No. of fans High Speed - HS Power Input FLC per fan SC per fan Low Speed - LS Power Input FLC per fan SC per fan Speed Noise ** Fan Data Connections HS LS Volume kw throw kw *** Inlet Outlet Internal volume HS LS W amps amps W amps amps rpm db (A) db (A) HS LS HS LS dm 3 m 2 kg DSR-*X19 1.92 1.21 1 64 0.3 0.4 26 0.14 0.14 1300/750 49 34 0.31 0.17 11 7 3/8 5/8 3 5.95 58 DSR-*X22 2.47 1.52 1 64 0.3 0.4 26 0.14 0.14 1300/750 49 34 0.3 0.16 11 7 3/8 5/8 3 8.93 62 DSR-*X36 3.6 2.31 2 128 0.3 0.4 52 0.14 0.14 1300/750 51 37 0.61 0.34 12 8 1/2 5/8 4 10.82 82 DSR-*X42 4.77 2.95 2 128 0.3 0.4 52 0.14 0.14 1300/750 51 37 0.59 0.32 11 7 1/2 5/8 6 16.23 90 DSR-*X51 5.8 3.78 3 192 0.3 0.4 78 0.14 0.14 1300/750 54 39 0.92 0.5 12 8 1/2 5/8 5 16.23 109 DSR-*X62 7.02 4.61 3 192 0.3 0.4 78 0.14 0.14 1300/750 54 39 0.88 0.49 11 7 1/2 5/8 8 24.35 121 DSR-*X68 7.62 5.16 4 256 0.3 0.4 104 0.14 0.14 1300/750 55 40 1.22 0.67 12 8 1/2 5/8 7 21.64 139 DSR-*X83 9.61 6 4 256 0.3 0.4 104 0.14 0.14 1300/750 55 40 1.18 0.65 11 7 1/2 5/8 10 32.46 154 DSR-*X100 11.17 7.51 4 640 0.81 1.9 376 0.87 1.98 1400/800 60 48 1.72 0.98 11 7 1/2 5/8 11 36.07 166 DSR-*X116 13.06 8.64 4 640 0.81 1.9 376 0.87 1.98 1400/800 60 48 1.56 0.89 11 7 1/2 5/8 16 54.1 189 Surface area Weight Notes: Rating conditions - The duties shown in this brochure are at EN 328 Standard Condition 2 (-8 C saturated suction temperature, 0 C air entering). To select at your application conditions please use the Kelvion Searle Selection Software or contact your local sales representative for more information. * DT1 is the difference between the entering air temperature and the saturated suction temperature at the outlet of the cooler. ** Noise levels are based on free field conditions at a distance of 3m. Actual noise levels will depend upon cold store construction, store loading and the number of coolers installed. *** Terminal air velocity 0.25m/s, free air conditions at 10 C. throw cannot be considered an absolute value because many factors have a substantial effect on the distance achieved.
DSR & DSC - dimension drawings DSR 19-22 145 580 Mounting CTRS 10 x O25 mounting slot 550 Fin length 16.5 916 Mounting CTRS 266 35 54 127 Drain conn. 3/4 BSP 870 Liquid inlet 50 910 outlet DSR 36-42 145 1030 Mounting CTRS 1000 Fin length 266 127 35 54 Drain conn. 3/4 BSP 1320 DSR 51-62 145 1530 Mounting CTRS 1500 Fin length 266 127 35 54 Drain conn. 3/4 BSP 1820
DSR & DSC - dimension drawings DSR 68-83 145 1015 Mounting CTRS 2000 Fin length 1015 Mounting CTRS 266 127 2320 Drain conn. 3/4 BSP DSR 100-116 145 1015 Mounting CTRS 2000 Fin length 1015 Mounting CTRS 351 213 35 54 2320 Drain conn. 3/4 BSP
Searle LSR Industrial dual discharge VERSATILE ROBUST DURABLE The LSR range of dual discharge coolers by Kelvion has been developed to meet the demands of general cold storage along with those associated with food production and preparation halls. The range is divided into 3 main sections based upon fan speed, with either a 4, 6 or 8 pole fanset available, each as two speeds as standard. The range consists of 6 medium sized ceiling mounted split coil covering a duty range from 6 to 60 kw. They are specifically designed to operate with refrigerant R404A but can also be used with R134a, R407C & R507A without modification. Fast and easy to install. Versatile range of discharge coolers. Robust construction, designed to withstand demanding applications. Easy access via hinged drainpan s and fan plate(s) for maintenance and cleaning. Fin design provides high surface area for frost build-up. Minimal refrigerant charge
Features Comprises of 12 models Available in 4mm and 6mm fin spacings 1-6 fan configurations Eurovent certified
Searle LSR Industrial dual discharge LSR RANGE PRODUCT PROFILE 1 CASEWORK 3 COIL The robust construction of the LSR range is designed to withstand demanding applications. Manufactured from galvanised steel panels, electrostatically gloss painted white RAL 9010, the case work is ideal to house 12 tube high coils. The Drain tray is situated under each coil hinged to give easy access for cleaning and maintenance. Light gauge curved air baffles are also fitted within the unit to give an even air distribution across the coil. 2 FANS The LSR range operates a 4, 6 and 8 pole external rotor fan sets and is available in single or 3 phase. Fan Diameter: 500mm IP Rating: 54 4 pole (nominal 1340 rpm) high speed are suitable for all temperatures 6 pole (nominal 930 rpm) mid speed, are suitable for all temperatures and offer the best compromise between noise and performance. The 8 pole (nominal 680 rpm) offers the low noise, Noise levels are quoted at a distance of 3m When operating at higher fan speeds and higher temperatures (above 0 C) there is a high likelihood of water carry over. Kelvion Searle recommends using 6 pole fan speeds for a good balance between noise level and performance across all applications. All LSR units feature the unique D fin, specially developed using a ½ inch diameter tube with an extended rifle bore inner surface The coil assembly comprising of two identical mirror image coils positioned diametrically opposite each other and connected together by a joining plate fitted between each coil end plates. Manufactured from ½ Tube Tube Pitch Across flow: 43mm Tube Pitch In Direction of flow: 37.2mm Fin Spacing (s): 4mm, 6mm and 8mm Fin Features: Light Ripple and Heater Holes Each coil has a separate coil end plate to complete assembly. Covers are fitted either end of the unit (in front of each coil end plate) to enable access to electrical and mechanical connections ADDITIONAL INFORMATION throws quoted within this catalogue are based on a terminal velocity of 0.25m/s in ideal conditions. Store layout, cooler location and discharge orientation can affect the air throw. Please refer to your supplier for further information. For pump circulation arranged as bottom feed for pump rates between 3:1 and 5:1. For other pump rates please refer to your supplier. The duties shown in this catalogue are at Eurovent Standard 7/C/001, Standard Condition 2 - (-8 0 C saturated suction temp. (dew point), 0 0 C air entering). Capacities are based on DT1 the difference between the entering air temperature and the saturated suction temperature at the outlet of the cooler. LSR Refrigerant data Refrigeration R404A R134a R507A R407A/F R407C Capacity factor (dew point, DT1) 1.00 0.91 0.97 1.24* 1.26* Refrigerant charge density (kg/dm 3 ) 0.312 0.338 0.313 0.332 0.332 * Capacity factors for refrigerants with high glide apply only at the nominal rating condition. Refrigerant charge densities are based on 25% of the internal volume being liquid.
1 5 3 6 2 4 Drain Tray 4 5 End plates 6 Fan plate Nomenclature LSR 12 1-4 4-4D - EL CU/ AL Range: LSR Height of case: 12 tube high No of fans: 1, 2, 3, 4, 5, 6 Coil depth: 4, 6 Fan spacing: 4mm, 6mm Fin speed: 4D, 6D, 8D Defrost: EL = Electric defrost in coil and drain tray Coil materials: CU/AL = Copper, Aluminium fin, CU/AC = Copper tube, Vinyl coasted Aluminium fin (4mm only) BG = Blygold Capacities: R404A: 6.5 kw - 89.2 kw
4 pole high speed - (low temperature, evaporating below -10 0 c) Fin spacing Model Capacity R404A No. of fans Motor details 400V - 3ph - 50Hz Fan data Connections Total power input FLC per fan SC per fan Speed Volume throw Noise level @ 3m Inlet (2 off) Outlet (2 off) Internal volume Surface area Defrost heather loads at 400V kw W amps amps RPM m 3 /s kg db(a) dm 3 m 2 kw kw LSR121-44-4D 12.7 1 700 1.5 5 1390 1.93 12 61 5/8 1 1/8 9.3 50.5 3.2 1.6 Coil Tray LSR121-64-4D 14.6 1 700 1.5 5 1390 1.78 10 61 5/8 1 1/8 14 75.5 3.2 1.6 LSR122-44-4D 25.4 2 1400 1.5 5 1390 3.86 12 64 5/8 1 1/8 17.5 101 6.4 3.2 LSR122-64-4D 29.7 2 1400 1.5 5 1390 3.55 10 64 5/8 1 1/8 26.3 151 6.4 3.2 LSR123-44-4D 38.2 3 2100 1.5 5 1390 5.78 12 66 5/8 1 1/8 25.7 151 9.5 4.8 4mm LSR123-64-4D 44.5 3 2100 1.5 5 1390 5.33 10 66 5/8 1 1/8 38.6 227 9.5 4.8 LSR124-44-4D 50.9 4 2800 1.5 5 1390 7.71 12 67 7/8 1 1/8 32.6 202 12.7 6.4 LSR124-64-4D 59.3 4 2800 1.5 5 1390 7.1 10 67 7/8 1 1/8 48.8 303 12.7 6.4 LSR125-44-4D 62.6 5 3500 1.5 5 1390 9.65 12 68 5/8 1 3/8 41.1 252 15.9 8.0 LSR125-64-4D 73.9 5 3500 1.5 5 1390 8.88 10 68 3/4 1 3/8 60.9 378 15.9 8.0 LSR126-44-4D 76.2 6 4200 1.5 5 1390 11.58 12 69 3/4 1 3/8 49.1 303 19.1 9.6 LSR126-64-4D 89.2 6 4200 1.5 5 1390 10.66 10 69 3/4 1 5/8 73.5 454 19.1 9.6 LSR121-46-4D 10.9 1 700 1.5 5 1390 2.15 14 61 1/2 1 1/8 9.3 34.5 3.2 1.6 LSR121-66-4D 13.4 1 700 1.5 5 1390 2.07 12 61 5/8 1 1/8 14 51.5 3.2 1.6 LSR122-46-4D 21.5 2 1400 1.5 5 1390 4.29 14 64 1/2 1 1/8 17.5 69 6.4 3.2 LSR122-66-4D 27.3 2 1400 1.5 5 1390 4.13 12 64 5/8 1 1/8 26.3 103 6.4 3.2 LSR123-46-4D 32.2 3 2100 1.5 5 1390 6.43 14 66 5/8 1 1/8 25.7 103 9.5 4.8 6mm LSR123-66-4D 40.9 3 2100 1.5 5 1390 6.2 12 66 5/8 1 1/8 38.6 155 9.5 4.8 LSR124-46-4D 42.9 4 2800 1.5 5 1390 8.57 14 67 7/8 1 1/8 32.6 138 12.7 6.4 LSR124-66-4D 54.6 4 2800 1.5 5 1390 8.27 12 67 7/8 1 1/8 48.8 207 12.7 6.4 LSR125-46-4D 53.5 5 3500 1.5 5 1390 10.73 14 68 5/8 1 3/8 41.1 172 15.9 8.0 LSR125-66-4D 68.4 5 3500 1.5 5 1390 10.35 12 68 3/4 1 3/8 60.9 259 15.9 8.0 LSR126-46-4D 65.1 6 4200 1.5 5 1390 12.95 14 69 3/4 1 3/8 49.1 208 19.1 9.6 LSR126-66-4D 82.2 6 4200 1.5 5 1390 12.41 12 69 3/4 1 5/8 73.5 311 19.1 9.6 Note: 4 pole coolers can be used in high temperature applications, however due to the high air velocity water carry over may occur. Energy rating is available from your local Searle representative, or Selection software. Energy efficiency class does not take into account the cooler defrost.
6 pole high speed - (High and low temperature) Fin spacing Model Capacity R404A No. of fans Motor details 400V - 3ph - 50Hz Fan data Connections Total power input FLC per fan SC per fan Speed Volume throw Noise level @ 3m Inlet (2 off) Outlet (2 off) Internal volume Surface area Defrost heather loads at 400V kw W amps amps RPM m 3 /s kg db(a) dm 3 m 2 kw kw LSR121-44-6D 9.5 1 250 0.75 1.65 930 1.29 9 53 5/8 1 1/8 9.3 50.5 3.2 1.6 Coil Tray LSR121-64-6D 10.6 1 250 0.75 1.65 930 1.17 7 53 5/8 1 1/8 14 75.5 3.2 1.6 LSR122-44-6D 19.1 2 500 0.75 1.65 930 2.59 9 56 5/8 1 1/8 17.5 101 6.4 3.2 LSR122-64-6D 21.3 2 500 0.75 1.65 930 2.34 7 56 5/8 1 1/8 26.3 151 6.4 3.2 LSR123-44-6D 28.6 3 750 0.75 1.65 930 3.88 9 58 5/8 1 1/8 25.7 151 9.5 4.8 4mm LSR123-64-6D 31.9 3 750 0.75 1.65 930 3.51 7 58 5/8 1 1/8 38.6 227 9.5 4.8 LSR124-44-6D 38.1 4 1000 0.75 1.65 930 5.18 9 59 7/8 1 1/8 32.6 202 12.7 6.4 LSR124-64-6D 42.7 4 1000 0.75 1.65 930 4.69 7 59 7/8 1 1/8 48.8 303 12.7 6.4 LSR125-44-6D 47.7 5 1250 0.75 1.65 930 6.48 9 60 5/8 1 3/8 41.1 252 15.9 8.0 LSR125-64-6D 53.7 5 1250 0.75 1.65 930 5.85 7 60 3/4 1 3/8 60.9 378 15.9 8.0 LSR126-44-6D 57.4 6 1500 0.75 1.65 930 7.77 9 61 3/4 1 3/8 49.1 303 19.1 9.6 LSR126-64-6D 63.9 6 1500 0.75 1.65 930 7.02 7 61 3/4 1 3/8 73.5 454 19.1 9.6 LSR121-46-6D 8.4 1 250 0.75 1.65 930 1.44 10 53 1/2 1 1/8 9.3 34.5 3.2 1.6 LSR121-66-6D 10.2 1 250 0.75 1.65 930 1.39 9 53 5/8 1 1/8 14 51.5 3.2 1.6 LSR122-46-6D 16.6 2 500 0.75 1.65 930 2.89 10 56 1/2 1 1/8 17.5 69 6.4 3.2 LSR122-66-6D 20.7 2 500 0.75 1.65 930 2.79 9 56 5/8 1 1/8 26.3 103 6.4 3.2 LSR123-46-6D 24.9 3 750 0.75 1.65 930 4.33 10 58 5/8 1 1/8 25.7 103 9.5 4.8 6mm LSR123-66-6D 31.1 3 750 0.75 1.65 930 4.18 9 58 5/8 1 1/8 38.6 155 9.5 4.8 LSR124-46-6D 33.3 4 1000 0.75 1.65 930 5.77 10 59 7/8 1 1/8 32.6 138 12.7 6.4 LSR124-66-6D 41.4 4 1000 0.75 1.65 930 5.57 9 59 7/8 1 1/8 48.8 207 12.7 6.4 LSR125-46-6D 41.8 5 1250 0.75 1.65 930 7.21 10 60 5/8 1 1/8 41.1 172 15.9 8.0 LSR125-66-6D 52.2 5 1250 0.75 1.65 930 6.97 9 60 3/4 1 3/8 60.9 259 15.9 8.0 LSR126-46-6D 50.5 6 1500 0.75 1.65 930 8.71 10 61 3/4 1 3/8 49.1 208 19.1 9.6 LSR126-66-6D 62.2 6 1500 0.75 1.65 930 8.36 9 61 3/4 1 3/8 73.5 311 19.1 9.6 Note: Energy rating is available from your local Sales representative, or Selection software. Energy efficiency class does not take into account the cooler defrost
8 pole high speed - (High and low temperature) Fin spacing Model Capacity R404A No. of fans Motor details 400V - 3ph - 50Hz Fan data Connections Total power input FLC per fan SC per fan Speed Volume throw Noise level @ 3m Inlet (2 off) Outlet (2 off) Internal volume Surface area Defrost heather loads at 400V kw W amps amps RPM m 3 /s kg db(a) dm 3 m 2 kw kw LSR121-44-8D 7.6 1 130 0.42 1.4 680 0.93 7 47 5/8 1 1/8 9.3 50.5 3.2 1.6 Coil Tray LSR121-64-8D 8.2 1 130 0.42 1.4 680 0.84 6 47 5/8 1 1/8 14 75.5 3.2 1.6 LSR122-44-8D 15.1 2 260 0.42 1.4 680 1.87 7 50 5/8 1 1/8 17.5 101 6.4 3.2 LSR122-64-8D 16.4 2 260 0.42 1.4 680 1.68 6 50 5/8 1 1/8 26.3 151 6.4 3.2 LSR123-44-8D 22.7 3 390 0.42 1.4 680 2.8 7 52 5/8 1 1/8 25.7 151 9.5 4.8 4mm LSR123-64-8D 24.7 3 390 0.42 1.4 680 2.53 6 52 5/8 1 1/8 38.6 227 9.5 4.8 LSR124-44-8D 30.1 4 520 0.42 1.4 680 3.74 7 53 7/8 1 1/8 32.6 202 12.7 6.4 LSR124-64-8D 32.9 4 520 0.42 1.4 680 3.37 6 53 7/8 1 1/8 48.8 303 12.7 6.4 LSR125-44-8D 38.19 5 650 0.42 1.4 680 4.68 7 54 5/8 1 1/8 41.1 252 16.0 8.0 LSR125-64-8D 41.86 5 650 0.42 1.4 680 4.21 6 54 5/8 1 1/8 60.9 378 16.0 8.0 LSR126-44-8D 45.81 6 780 0.42 1.4 680 5.6 7 55 5/8 1 3/8 49.1 303 19.2 9.6 LSR126-64-8D 50.17 6 780 0.42 1.4 680 5.06 6 55 3/4 1 3/8 73.5 454 19.2 9.6 LSR121-46-8D 6.5 1 130 0.42 1.4 680 1.07 7 47 1/2 1 1/8 9.3 34.5 3.2 1.6 LSR121-66-8D 8 1 130 0.42 1.4 680 1.03 6 47 5/8 1 1/8 14 51.5 3.2 1.6 LSR122-46-8D 13.1 2 260 0.42 1.4 680 2.14 7 50 1/2 1 1/8 17.5 69 6.4 3.2 LSR122-66-8D 16.1 2 260 0.42 1.4 680 2.06 6 50 5/8 1 1/8 26.3 103 6.4 3.2 LSR123-46-8D 19.7 3 390 0.42 1.4 680 3.21 7 52 5/8 1 1/8 25.7 103 9.5 4.8 6mm LSR123-66-8D 24.2 3 390 0.42 1.4 680 3.09 6 52 5/8 1 1/8 38.6 155 9.5 4.8 LSR124-46-8D 26.3 4 520 0.42 1.4 680 4.28 7 53 7/8 1 1/8 32.6 138 12.7 6.4 LSR124-66-8D 32.2 4 520 0.42 1.4 680 4.13 6 53 7/8 1 1/8 48.8 207 12.7 6.4 LSR125-46-8D 34.67 5 650 0.42 1.4 680 5.36 7 54 5/8 1 1/8 41.1 172 16.0 8.0 LSR125-66-8D 42.29 5 650 0.42 1.4 680 5.16 6 54 5/8 1 1/8 60.9 259 16.0 8.0 LSR126-46-8D 41.75 6 780 0.42 1.4 680 6.48 7 55 5/8" 1 1/8 49.1 208 19.2 9.6 LSR126-66-8D 50.75 6 780 0.42 1.4 680 6.19 6 55 3/4 1 3/8 73.5 311 19.2 9.6 Note: Energy rating is available from your local Sales representative, or Selection software. Energy efficiency class does not take into account the cooler defrost
LSR Dimensions LSR 121 165 1080 Overall length 750 Fixing CTRS O21.0 4 holes 165 1396 Over splash guard 1369 Over hangers 1319 Fixing CTRS 570 580 Coil conns end 1.1/2 drain connection LSR 122 1755 Overall length 1469 Over open drain pans 165 1425 Fixing CTRS 165 O21.0 4 holes 570 Coil conns end 580 1.1/2 drain connection Removable access panels both ends Removable access panels both ends 876.5 Required space 1266.5 Required space LSR 123 570 165 LSR 124 165 570 2430 Overall length 2100 Fixing CTRS 165 O21.0 4 holes 1.1/2 drain connection 3105 Overall length 1387.5 Fixing CTRS 1387.5 Fixing CTRS 165 O21.0 6 holes Coil conns end 590 600 Coil conns end 1.1/2 drain connection Model Cu/Al weight (kg) Cu/Cu weight (kg) LSR121-44-8D 117 151 LSR121-64-8D 130 180 LSR122-44-8D 180 232 LSR122-64-8D 200 277 LSR123-44-8D 237 314 LSR123-64-8D 266 382 LSR124-44-8D 301 405 LSR124-64-8D 341 496 LSR125-44-8D 386 520 LSR125-64-8D 426 623 LSR126-44-8D 464 629 LSR126-64-8D 504 744 LSR121-46-8D 114 141 LSR121-66-8D 125 165 LSR122-46-8D 175 216 LSR122-66-8D 192 254 LSR123-46-8D 230 291 LSR123-66-8D 256 348 LSR124-46-8D 292 374 LSR124-66-8D 326 446 LSR125-46-8D 377 482 LSR125-66-8D 411 561 LSR126-46-8D 455 584 LSR126-66-8D 489 670
Searle FM Industrial cooler RELIABLE ENGINEERING THAT LASTS The Searle FM range of large floor mounted coolers from Kelvion features the draw through arrangement where air enters the front of the cooler horizontally and is turned to discharge either horizontally or vertically depending on the option required. Short cased ducted axial fans are mounted directly on top of the cooler. A discharge cowl can be fitted on top of the unit over the fan set to permit air discharge in the room away from the cooler. Features Robust construction, designed to withstand demanding applications. Capacities can be achieved with many choices of size, fin spacing and air volume. Easy access for maintenance and cleaning. Double-skinned, insulated draintray assists defrost in low temperature applications and prevents condensation in high temperature applications. Structural, one-piece draintray allows units to be lifted, fully-assembled, from underneath. Fin design provides high secondary surface extending operating times between defrosts. Minimal refrigerant charge. Fin design provides high surface area for frost build-up.
Features Comprises of 20,24,30,36 tube height options Available in 4mm and 6mm fin spacings 1-4 fan configurations Eurovent certified
Searle FM Industrial cooler FM RANGE PRODUCT PROFILE 1 CASEWORK 2 COIL The FM displays a unique style the casework is manufactured in galvanized steel sheet panels painted in our traditional white RAL 9010 with the option of either vertical or horizontal orientation. The robust construction design is durable to withstand the most demanding of applications allowing easy access for maintaining and cleaning. The axial fan sets are bolted directly onto the heavy gauge fan plates which are supported by rigid cross members. The structural one-piece draintray allows units to be lifted from underneath. It is double skinned to assist defrost at low temperature and prevent condensation in high temperature applications The coil has been specially designed to offer a large secondary cooling surface which is beneficial for industrial refrigeration applications. Frost can build over a larger surface, reducing the number of defrost cycles, and allowing the cooler to operate efficiently for longer periods. Manufactured from 5/8 Tube Tube Pitch In Direction of flow = 50.8mm Tube Pitch Across flow = 55mm Fin Spacing(s): 4mm, 6mm and 8mm Fin Features: Light Ripple and Heater Holes 2 FANS/MOTOR & NOISE DATA ADDITIONAL INFORMATION Defrost loads include drain pan power peripheral heater load (where fitted) for ducted axial fan sets 800mm diameter = 630W, 900mm diameter = 710W per fan. Ducted axial fans with 125Pa of external static pressure are standard. Standard fans are supplied with 4 pole, nominal 1440rpm fan speeds. Noise levels are quoted at a distance of 3m from the unit at an angle of 45 to the horizontal within a free field condition. The motors are three phase and suitable for 400V/50Hz as standard. The fan sets are provided with a motor side wire guard. throws quoted within this catalogue are based on a terminal velocity of 0.25m/s in ideal conditions. Store layout, cooler location and discharge orientation can affect the air throw. Please refer to your supplier for further information. Arranged as bottom feed for pump rates between 3:1 and 5:1. For other pump rates please refer to your supplier. Incorrect unit location will adversely affect unit performance and air throw. For advice on unit location, please contact your supplier. A full range of turning cowls (for vertical discharge units no external static pressure) and air operated dampers are available. Other options may be available please consult your local Kelvion representative for further details. Defrost loads include drain pan power as below Modules FM--1 FM--2 FM--3 FM--4 Drainpan 1.6 3.2 4.8 6.4 Peripheral heater load (where fitted) for ducted axial fan sets 800mm diameter = 630W, 900mm diameter = 710W per fan. FM Refrigerant data Refrigeration R404A R134a R507A R407A/F R407C Capacity factor (dew point, DT1) 1.00 0.91 0.97 1.24* 1.26* Refrigerant charge density (kg/dm 3 ) 0.312 0.338 0.313 0.332 0.332 * Capacity factors for refrigerants with high glide apply only at the nominal rating condition. Refrigerant charge densities are based on 25% of the internal volume being liquid.
6 2 1 3 5 4 Drain Tray 4 5 End plates 6 Vertical or horizontal discharge orientation Nomenclature FM 20 1-6 6 - AA - V EL CU/ AL Range: FM Height of case: Tube high = 20, 24, 30, 36 No of fans: 1, 2, 3, 4, Coil depth: 4, 6, 8 Fin spacing: 4mm, 6mm, 8mm Fan/motor type: Ducted axial AA, AB, AC, AD Orientation: Discharge: V = vertical, H = Horizontal Coil materials: EL= Electric defrost in coil and drain tray, HGEA,B,C,D = hot gas coil, electric drain tray defrost, HGDA,B = hot gas coil and drain tray defrost, HGDC = hot gas coil and drain tray defrost, HGDD = hot gas coil and drain tray defrost, Coil material: CU/AL = Copper, Aluminium Fin Capacities R404A: 22 kw - 265 kw
4mm specification Model Capacity Dia. Section Total power input FLC per fan SC per fan Volume at 125Pa throw Sound power level Sound pressure level Connections Inlet (2 off) Outlet (2 off) Internal volume Surface area Defrost Weight kw W amps amps m 3 /s m db(a) db(a) dm 3 m 2 kg kg kg FM201-44-AA 26.4 800 1 3.3 5.8 30A 4.54 51 94 77 5/8 1 3/8 26 137.5 10 451 532 FM201-64-AA 32.1 800 1 3.3 5.8 30A 4.19 47 94 77 5/8 1 3/8 38 206.3 12 488 569 FM202-44-AA 52.1 800 1 3.3 5.8 30A 9.07 51 97 80 3/4 1 3/8 49 275 19 686 782 FM202-64-AA 64.5 800 1 3.3 5.8 30A 8.39 47 97 80 3/4 1 5/8 72 412.5 24 759 855 FM203-44-AA 80.1 800 1 3.3 5.8 30A 13.59 51 99 82 3/4 2 1/8 71 412.5 29 921 1032 FM203-64-AA 96.7 800 2 3.3 5.8 30A 12.56 47 99 82 2 x 3/4 2 x 1 5 /8 106 618.8 36 1029 1141 FM241-44-AB 29.2 800 1 3.3 5.8 30A 4.75 54 94 77 5/8 1 3/8 31 165 10 489 569 FM241-64-AB 35.4 800 1 3.3 5.8 30A 4.45 51 94 77 3/4 1 3/8 46 247.5 12 533 614 FM242-44-AB 57.9 800 1 3.3 5.8 30A 9.5 54 97 80 3/4 1 5/8 59 330 19 742 838 FM242-64-AB 71 800 1 3.3 5.8 30A 8.9 51 97 80 3/4 1 5/8 87 495.1 24 830 925 FM243-44-AB 88.3 800 1 3.3 5.8 30A 14.25 54 99 82 3/4 2 1/8 85 495.1 29 996 1107 FM243-64-AB 106.6 800 2 3.3 5.8 30A 13.35 51 99 82 2 x 3/4 2 x 1 5/8 128 742.6 36 1126 1237 FM302-44-AC 73.9 900 2 3.3 5.8 30A 12.06 55 101 84 2 x 5/8 2 x 1 3/8 74 412.5 19 849 944 FM302-64-AC 91.7 900 2 3.3 5.8 30A 11.65 50 101 84 2 x 3/4 2 x 1 3/8 109 618.8 29 958 1054 FM303-44-AC 111 900 2 3.3 5.8 30A 18 55 103 86 2 x 3/4 2 x 1 5/8 107 618.8 29 1141 1152 FM303-64-AC 137.8 900 2 3.3 5.8 30A 17.47 50 103 86 2 x 3/4 2 x 1 5/8 158 928.2 43 1304 1415 FM304-44-AC 146.5 900 2 3.3 5.8 30A 24 55 104 87 2 x 3/4 2 x 1 5/8 140 825.1 38 1433 1560 FM304-64-AC 183.1 900 2 3.3 5.8 30A 23.29 50 104 87 2 x 3/4 2 x 2 1/8 208 1237.6 58 1650 1776 FM362-64-AD 117.6 900 2 3.3 9.4 55A 15.39 52 103 86 2 x 3/4 2 x 1 5/8 130 742.6 34 1064 1160 FM363-84-AD 132 900 2 3.3 9.4 55A 15.02 49 103 86 2 x 3/4 2 x 1 5/8 172 990.1 45 1644 1755 FM363-64-AD 176.6 900 3 3.3 9.4 55A 23.08 52 105 88 3 x 3/4 3 x 1 5/8 191 1113.9 50 1449 1560 FM363-84-AD 196.6 900 2 3.3 9.4 55A 22.53 49 105 88 2 x 3/4 2 x 2 1/8 254 1485.2 67 1644 1755 FM364-64-AD 233.8 900 3 3.3 9.4 55A 30.77 52 106 89 3 x 3/4 3 x 2 1/8 252 1485.2 67 1833 1960 FM364-84-AD 265 900 3 3.3 9.4 55A 30.05 49 106 89 3 x 3/4 3 x 2 1/8 336 1980.2 90 2093 2220 Vertical Horizontal 6mm specification Model Capacity Dia. Section Total power input FLC per fan SC per fan Volume at 125Pa throw Sound power level Sound pressure level Connections Inlet (2 off) Outlet (2 off) Internal volume Surface area Defrost Vertical Weight kw W amps amps m 3 /s m db(a) db(a) dm 3 m 2 kg kg kg FM201-66-AA 26.4 800 1 3.3 5.8 30A 4.45 50 94 77 5/8 1 3/8 38 140 10 464 545 FM201-86-AA 29.9 800 1 3.3 5.8 30A 4.28 48 94 77 5/8 1 3/8 50 186.8 12 493 574 FM202-66-AA 52.9 800 1 3.3 5.8 30A 8.89 50 97 80 3/4 1 3/8 72 280 19 711 807 FM202-86-AA 61.2 800 1 3.3 5.8 30A 8.55 48 97 80 3/4 1 5/8 95 373.7 24 767 863 FM203-66-AA 79.4 800 2 3.3 5.8 30A 13.34 50 99 82 2 x 3/4 2 x 1 3/8 106 420.1 29 957 1068 FM203-86-AA 91.5 800 1 3.3 5.8 30A 12.83 48 99 82 3/4 1 3 /8 141 560.5 36 1042 1153 FM241-66-AB 29.1 800 1 3.3 5.8 30A 4.7 54 94 77 5/8 1 3/8 46 168 10 504 585 FM241-86-AB 33.4 800 1 3.3 5.8 30A 4.5 51 94 77 3/4 1 3/8 61 224.2 12 539 620 FM242-66-AB 58.5 800 1 3.3 5.8 30A 9.4 54 97 80 3/4 1 5/8 87 336.1 19 772 868 FM242-86-AB 67.2 800 1 3.3 5.8 30A 9 51 97 80 3/4 1 5/8 115 448.4 24 840 936 FM243-66-AB 88.8 800 2 3.3 5.8 30A 14.1 54 99 82 2 x 3/4 2 x 1 3/8 128 504.1 29 1039 1150 FM243-86-AB 100.8 800 2 3.3 5.8 30A 13.5 51 99 82 2 x 3/4 2 x 1 5/8 171 672.6 36 1141 1252 FM302-66-AC 74.2 900 2 3.3 5.8 30A 12 54 101 84 2 x 3/4 2 x 1 3/8 109 420.4 19 885 981 FM302-86-AC 86.1 900 2 3.3 5.8 30A 11.65 52 101 84 2 x 3/4 2 x 1 3/8 144 560.5 29 970 1066 FM303-66-AC 111.6 900 2 3.3 5.8 30A 18 54 103 86 2 x 3/4 2 x 1 5/8 158 630.6 29 1195 1307 FM303-86-AC 129.1 900 2 3.3 5.8 30A 17.47 52 103 86 2 x 3/4 2 x 1 5/8 209 840.8 43 1322 1433 FM304-66-AC 149.6 900 2 3.3 5.8 30A 24 54 104 87 2 x 3/4 2 x 1 5/8 208 840.8 38 1505 1632 FM304-86-AC 172.6 900 3 3.3 5.8 30A 23.29 52 104 87 3 x 3/4 3 x 2 5/8 276 1121.1 58 1674 1800 FM362-66-AD 94.3 900 2 3.3 9.4 55A 15.78 56 103 86 2 x 3/4 2 x 1 5/8 130 504.5 34 977 1073 FM362-86-AD 110.8 900 2 3.3 9.4 55A 15.3 54 103 86 2 x 3/4 2 x 1 5/8 172 672.6 45 1079 1175 FM363-66-AD 141.6 900 2 3.3 9.4 55A 23.67 56 105 88 2 x 3/4 2 x 1 5/8 191 756.7 50 1319 1430 FM363-86-AD 165.8 900 2 3.3 9.4 55A 23.29 54 105 88 2 x 3/4 2 x 2 1/8 254 1009 67 1471 1582 FM364-66-AD 190.1 900 3 3.3 9.4 55A 31.57 56 106 89 3 x 3/4 3 x1 5/8 252 1009 67 1660 1787 FM364-86-AD 222 900 3 3.3 9.4 55A 31.03 54 106 89 3 x 3/4 3 x 1 5/8 336 1345.3 90 1862 1989 Horizontal
8mm specification Model Capacity Dia. Section Total power input FLC per fan SC per fan Volume at 125Pa throw Sound power level Sound pressure level Connections Inlet (2 off) Outlet (2 off) Internal volume Surface area Defrost Weight kw W amps amps m 3 /s m db(a) db(a) dm 3 m 2 kg kg kg FM201-68-AA 22.1 800 1 3.3 5.8 30A 4.63 52 94 77 5/8 1 1/8 38 107.1 12 452 533 FM201-88-AA 25.9 800 1 3.3 5.8 30A 4.45 50 94 77 5/8 1 3/8 50 142.8 14 477 558 FM202-68-AA 44.6 800 1 3.3 5.8 30A 9.23 52 97 80 3/4 1 3/8 72 214.1 24 687 782 FM202-88-AA 52.3 800 1 3.3 5.8 30A 8.89 50 97 80 3/4 1 5/8 95 285.5 29 735 831 FM203-68-AA 66.3 800 2 3.3 5.8 30A 13.86 52 99 82 2 x 3/4 2 x1 5 /8 106 321.2 36 921 1032 FM203-88-AA 75.5 800 1 3.3 5.8 30A 13.34 50 99 82 3/4 2 1 /8 141 428.3 43 993 1105 FM241-68-AB 24.4 800 1 3.3 5.8 30A 4.8 55 94 77 5/8 1 1/8 46 128.5 12 490 570 FM241-88-AB 25.7 800 1 3.3 5.8 30A 4.67 53 94 77 5/8 1 3/8 61 171.3 14 520 600 FM242-68-AB 48.5 800 1 3.3 5.8 30A 9.6 55 97 80 3/4 1 5/8 87 257 24 743 839 FM242-88-AB 57.7 800 1 3.3 5.8 30A 9.34 53 97 80 3/4 1 5/8 115 342.6 29 801 897 FM243-68-AB 72.8 800 1 3.3 5.8 30A 14.4 55 99 82 2 x 3/4 2 x 1 3/8 128 385.4 36 996 1107 FM243-88-AB 86.6 800 2 3.3 5.8 30A 14.01 53 99 82 2 x 3/4 2 x 1 3/8 171 513.9 43 1083 1194 FM302-68-AC 61.6 900 2 3.3 5.8 30A 12.21 56 101 84 2 x 5/8 2 x 1 3/8 109 321.2 29 849 945 FM302-88-AC 73.2 900 2 3.3 5.8 30A 12 54 101 84 2 x 3/4 2 x 1 3/8 144 428.3 38 922 1018 FM303-68-AC 93 900 2 3.3 5.8 30A 18.32 56 103 86 2 x 3/4 2 x 1 3/8 158 481.8 43 1141 1252 FM303-88-AC 110.3 900 2 3.3 5.8 30A 18 54 103 86 2 x 3/4 2 x 1 5/8 209 642.4 58 1250 1361 FM304-68-AC 124.1 900 2 3.3 5.8 30A 24.42 56 104 87 2 x 3/4 2 x 1 5/8 208 642.4 58 1433 1560 FM304-88-AC 145 900 2 3.3 5.8 30A 24 54 104 87 2 x 3/4 2 x1 5/8 276 856.6 77 1577 1704 FM362-68-AD 77.5 900 2 3.3 9.4 55A 15.95 58 103 86 2 x 3/4 2 x 1 3/8 130 385.4 34 934 1030 FM362-88-AD 93.2 900 2 3.3 9.4 55A 15.77 56 103 86 2 x 3/4 2 x 1 5/8 172 513.9 45 1021 1117 FM363-68-AD 117.5 900 2 3.3 9.4 55A 23.92 58 105 88 2 x 3/4 2 x 1 5/8 191 578.2 50 1254 1365 FM363-88-AD 140.1 900 2 3.3 9.4 55A 23.65 56 105 88 2 x 3/4 2 x 2 5/8 254 770.9 67 1384 1495 FM364-68-AD 157 900 3 3.3 9.4 55A 31.89 58 106 89 3 x 3/4 3 x 1 5/8 252 770.9 67 1573 1700 FM364-88-AD 186.8 900 3 3.3 9.4 55A 31.53 56 106 89 3 x 3/4 3 x 1 5/8 336 1027.9 90 1746 1973 Vertical Horizontal Note: All data for 400V, 3 phase, 50Hz supply. Noise levels are quoted at a distance of 3m from the units (free field). Capacities are nominal, based on DT1 dew point and stated at Eurovent standard condition 2 (-8oC saturated suction temp, 0 o C air entering).
FM dimensions - Vertical Discharge 1200 1080 40 1000 40 Opening 40 740 operated damper & crowl extension (defrost units) 450 opening 530 300 40 50 1150 MNTG CRS Vertical discharge with spigot attachment option 1875 Mesh guard fitted on all coils 3150 Heater removal 1000 Min 740 Heater removal 2000 Min 740 Rfrig. connections Power supply input A B Rfrig. connections 412 Power supply input A B 412 2 BSP (M) Drain conn 1575 Mounting CTRS 150 16mm MTG hole 2 BSP (M) Drain conn 1425 Mounting CTRS 1425 Mounting CTRS 150 16mm MTG hole 4425 Heater removal 2000 Min 740 Rfrig. connections Power supply input A B 412 2 BSP (M) Drain conn 1425 Mounting CTRS 1275 Mounting CTRS 1425 Mounting CTRS 150 16mm MTG hole 5700 Heater removal 2000 Min 740 Model Dim A Dim B Rfrig. connections Power supply input A B FM20 1016 1969 FM24 1219 2172 FM30 1524 2477 FM36 1829 2782 412 2 BSP (M) Drain conn 1425 Mounting CTRS 1275 Mounting CTRS 1275 Mounting CTRS 1425 Mounting CTRS 150 16mm MTG hole
FM dimensions - Horazontal Discharge 1200 C 1200 50 1875 operated damper & guard (defrost units) Heater removal 1000 Min 1220 A B 1150 1150 2 BSP (M) 1575 Drain conn Mounting CTRS 3150 16mm 150 MTG hole Heater removal 2000 Min 1220 Rfrig. connections A B 4425 Heater removal 2000 Min 1220 A B 2 BSP (M) Drain. conn 1425 MNTG CRS 150 16mm MTG hole 5700 Heater removal 2000 Min 1220 A B 412 412 412 412 Power supply input 2 BSP (M) Drain conn 1425 1425 16mm 150 Mounting CTRS Mounting CTRS MTG hole Rfrig. connections Power supply input 1425 MNTG CRS 1275 MNTG CRS Model Dim A Dim B Dim C Rfrig. connections Power supply input FM20 1016 1468 FM24 1219 1671 FM30 1524 1976 FM36 1829 2281 595 595 573 573 2 BSP (M) Drain conn. 1425 MNTG CRS 1275 MNTG CRS 1275 MNTG CRS 1425 MNTG CRS 16mm 150 MTG hole
Searle SM Industrial cooler ENGINEERING SOLUTIONS THAT MAKE A DIFFERENCE The Searle SM range has been designed by Kelvion to be as versatile as possible, whilst allowing unit selections to be easily made. Unit sizes and coils have been matched with different fan and motor combinations to broadly meet two common operating conditions: 1. High temperature applications such as store rooms and occupied areas. These units, with either propeller or ducted axial fans, feature low face velocities, low noise and high efficiency. These fans have also been selected to ensure that there is no water carry-over. 2. Low temperature applications such as cold storage or blast freezing in generally unoccupied areas. These units, with ducted axial fans, feature high face velocities and high air throws where low noise levels are not required. These units offer greater duty for a given size than high temperature units. Robust construction that can withstand demanding applications. Capacities can be achieved with any choice of size, fin spacing and air volume. Easy access for maintenance and cleaning. One-piece draintray allows units to be lifted, fully-assembled, from underneath Fin design provides high surface area for frost build-up. Double-skinned, insulated draintrays assist defrost in low temperature applications and prevents condensation in high temperature applications.
Features Comprises of 16,20,24,30tube height options Available in 4mm and 6mm fin spacings 1-4 fan configurations Eurovent certified
Searle SM Industrial dual discharge SM RANGE PRODUCT PROFILE 1 CASEWORK 3 COIL Fashioned from galvanised painted steel RAL 9010 the external surfaces are corrosion protected. The pleasing aesthetics offered by other Kelvion Searle coolers such as the KEC and KME is also reflected in the SM, the casework has also been modified suitably to withstand the demanding effects from industrial environments. The versatile design to the SM casework allows the option for ceiling or base mounted positioning with easy access for maintenance and cleaning. All units have a one-piece drain tray which allows units to be lifted fully assembled from underneath using the packing pieces supplied. It is double skinned and insulated to assist defrost in low temperature applications and prevents condensation in high temperature applications. The Searle SM coil features the same characteristics as the FM range. The coils are manufactured in one or two sections with aluminium fins and they are 4, 6 and 8 rows deep designed to offer a large secondary cooling surface which means frost can build over a larger surface, reducing the number of defrost cycles allowing the cooler to operate efficiently for longer periods. Manufactured from 5/8 Tube Tube Pitch In Direction of flow = 50.8mm Tube Pitch Across flow = 55mm Fina Spacing(s): 4mm, 6mm and 8mm Fin Features: Light Ripple and Heater Holes 2 FAN ADDITIONAL INFORMATION Available as propeller or ducted axial fans, with varying face velocities and air throws, are offered to provide optimum performance in the two broad operating conditions. The fan sets are provided with a motor side wire guard, which is sufficiently far away from the rotating fan blades to prevent danger zones being reached. Both fans and motors (P1 propeller type) are suitable for use from 25 C to +40 C Propeller or ducted axial fans P1 option fan-sets are suitable for 400V/50Hz operation Motors are 3 phase and suitable for 400V/50Hz as standard Motors are fitted outboard of the cooler with the terminal box readily accessible for wiring. Incorrect unit location will adversely affect unit performance and air flow. Units should be adequately spaced from walls to ensure even air coverage over the coil block. For advice on unit location, please contact your supplier. throws quoted within this catalogue are based on a terminal velocity of 0.25m/s in ideal conditions. Store layout, cooler location and type of fan can affect the air throw. Please refer to your supplier for further information. Noise levels are quoted at a distance of 3m from the unit at an angle of 45 to the horizontal within a free field condition. The figures are supplied as a guide only, showing comparative noise levels between models and fan selections. If the application is noise sensitive we would advise the appointment of an independent noise consultant. Defrost loads include drain pan power as below Modules FM--1 FM--2 FM--3 FM--4 Drainpan 1.6 3.2 4.8 6.4 Peripheral heater load (where fitted) for ducted axial fan sets 800mm diameter = 630W, 900mm diameter = 710W per fan. SM Refrigerant data Refrigeration R404A R134a R507A R407A/F R407C Capacity factor (dew point, DT1) 1.00 0.91 0.97 1.24* 1.26* Refrigerant charge density (kg/dm 3 ) 0.312 0.338 0.313 0.332 0.332 * Capacity factors for refrigerants with high glide apply only at the nominal rating condition. Refrigerant charge densities are based on 25% of the internal volume being liquid.
5 1 3 2 4 4 Drain Tray 5 End plates Nomenclature SM 16 1-4 4 - A3 EL CU/ AL Range: SM Height of case: Tube high = 16, 20, 24, 30 No of fans: 1, 2, 3, 4 No of rows: 4, 6, 8 Fin spacing: 4mm, 6mm, 8mm Fan/motor type: Ducted axial A1, A2, A3, A4, A5 Defrost: EL= Electric defrost in coil and drain tray, HGEA,B,C,D = hot gas coil, electric draintray defrost, HGDA,B = hot gas coil and drain tray defrost, HGDC = hot gas coil and drain tray defrost, HGDD = hot gas coil and drain tray defrost, Coil material: CU/AL = Copper, Aluminium Fin, BG Blygold Capacities: R404A: 12 kw - 191 kw
4mm specification High/low temperature - Low face velocity, low capacity, low air throw, compact unit Model SM161-44 Fan/Motor P1 entering -25 O C to + 20 O C R404A capacity Propeller volume throw Noise Fan/Motor entering -25 O C to + 20 O C R404A capacity Ducted Axial volume Connections throw Noise Outlet Inlet Surface area Internal volume kw m 3 /s m db(a) kw m 3 /s m db(a) m 2 dm 3 kw 18.1 2.56 18 59 A1 SM161-64 SM162-44 SM162-64 SM163-44 SM163-64 Dia. = 630mm 6 pole FLC/SC = 1.8/5.4A input = 810W 21.1 35.7 43.0 54.1 63.8 2.4 5.1 4.82 7.66 7.22 17 18 17 18 17 59 62 62 64 64 Dia. = 630mm 6 pole FLC/SC = 1.5/4.5A input = 710W 22.2 37 44.9 56.4 67.1 2.56 5.44 5.12 8.18 7.68 33 35 33 35 33 58 61 61 63 63 1 3/8 1 5/8 1 5/8 2 1/8 2 1/8 5/8 5/8 5/8 1 1/8 1 1/8 165 220 330 330 495 30 38 58 57 84 10 14 19 22 29 Defrost power 18.9 2.72 35 58 1 3/8 1/2 110 20 7 SM201-44 P1 21.4 3.24 23 59 A2 21.4 3.02 34 60 1 3/8 5/8 137 26 10 SM201-64 Dia. = 630mm 25.1 3.04 21 59 Dia. = 710mm 25.7 2.84 32 60 1 3/8 5/8 206 38 12 SM202-44 6 pole 42.6 6.48 23 62 6 pole 43 6.04 34 63 2 1/8 5/8 275 49 19 SM202-64 FLC/SC = 50.3 6.08 21 62 FLC/SC = 51.1 5.66 32 63 2 1/8 1 1/8 412 72 24 SM203-44 1.8/5.4A 64.4 9.72 23 64 1.5/4.5A 65.2 9.06 34 65 2 1/8 1 1/8 412 71 29 SM203-64 input = 810W 76.0 9.14 21 64 input = 680W 76.6 8.5 32 65 2 1/8 1 1/8 619 106 36 SM242-44 A4 54.9 7.7 39 66 2 1/8 1 1/8 330 59 19 SM242-64 SM243-44 SM243-64 SM244-44 SM244-64 Dia. = 800mm 8 pole FLC/SC = 2.7/6.8A input = 1000W 63.8 82.6 97.2 108.6 131.1 7.22 11.6 10.84 15.4 14.44 36 39 36 39 36 66 68 68 69 69 2 1/8 2 1/8 2 5/8 2 5/8 2 x 2 1/8 1 1/8 1 1/8 1 1/8 1 1/8 2 x 1 1/8 495 495 742 660 990 87 85 128 114 166 24 29 36 38 48 SM302-44 A4 61.2 8.18 41 66 2 1/8 1 1/8 412 74 19 SM302-64 Dia. = 800mm 73.4 7.8 39 66 2 1/8 1 1/8 619 109 29 SM303-44 8 pole 92.2 12.28 41 68 2 x 2 1/8 2 x 7/8 619 107 29 SM303-64 FLC/SC = 109.8 12.68 39 68 2 x 2 1/8 2 x 1 1/8 928 158 43 SM304-44 2.7/6.8A 123.1 16.34 41 69 2 x 2 1/8 2 x 1 1/8 825 140 38 SM304-64 input = 1000W 147.2 15.58 39 69 2 x 2 1/8 2 x 1 1/8 1237 208 58 4mm specification Low temperature High face velocity, high capacity, high air throw, compact unit Model SM161-44 Fan/Motor entering -35 O C to + 20 O C R404A capacity Propeller volume throw Noise Outlet Connections Inlet Surface area Internal volume kw m 3 /s m db(a) m 2 dm 3 kw 22.8 3.76 48 69 1 5/8 5/8 110 20 7 SM161-64 SM162-44 SM162-64 SM163-44 A3 Dia. = 630mm 4 pole FLC/SC = 3.8/14A input = 1890W 28.1 45.7 56 68.4 3.58 7.52 7.14 11.28 46 44 46 48 69 72 72 74 1 5/8 2 1/8 2 1/8 2 1/8 5/8 7/8 1 1/8 1 1/8 165 220 330 330 30 38 58 57 10 14 19 22 SM163-64 84.4 10.72 46 74 2 5/8 1 1/8 495 84 29 SM201-44 29.8 5.04 51 71 1 5/8 5/8 137 26 10 SM201-64 SM202-44 SM202-64 SM203-44 A5 Dia. = 800mm 6 pole FLC/SC = 3.4/15A input = 2000W 36.5 59.5 73.3 90.4 4.66 10.08 9.32 15.1 47 51 47 51 71 72 72 74 1 5/8 2 1/8 2 1/8 2 5/8 5/8 1 1/8 1 1/8 1 1/8 206 275 412 412 38 49 72 71 12 19 24 29 SM203-64 109.8 13.96 47 74 2 x 2 1/8 2 x 1 1/8 619 106 36 SM242-44 67.2 10.74 54 72 2 1/8 1 1/8 330 59 19 SM242-64 A5 81.7 10.08 51 72 2 1/8 1 1/8 495 87 24 SM243-44 Dia. = 800mm 101.2 16.16 54 74 2 1/8 1 1/8 495 85 29 6 pole SM243-64 FLC/SC = 3.4/15A 123.1 15.4 51 74 2 x 2 1/8 2 x 1 1/8 742 128 36 SM244-44 input = 2000W 132.2 21.48 54 75 2 x 2 1/8 2 x 1 1/8 660 114 38 SM244-64 162.2 20.14 51 75 2 x 2 1/8 2 x 1 1/8 990 166 48 SM302-44 83.8 13.38 54 78 2 1/8 1 1/8 412 74 19 SM302-64 A6 99.8 12.22 49 78 2 x 2 1/8 2 x 1 1/8 419 109 29 SM303-44 Dia. = 1000mm 126.5 20.08 54 79 2 x 2 1/8 2 x 1 1/8 619 107 29 6 pole SM303-64 FLC/SC = 5.8/24A 150.7 18.34 49 79 2 x 2 1/8 2 x 1 1/8 928 158 43 SM304-44 input = 2525W 165.6 26.78 54 81 2 x 2 1/8 2 x 1 1/8 825 140 38 SM304-64 199 24.44 49 81 2 x 2 5/8 2 x 1 1/8 1237 208 58 Defrost power
6mm specification high/low temperature Low face velocity, low capacity, low air throw, compact unit Model Fan/Motor entering -25 O C to + 20 O C Propeller R404A capacity volume throw Noise Fan/Motor entering -25 O C to + 20 O C Ducted Axial R404A capacity 6mm specification Low temperature High face velocity, high capacity, high air throw, compact unit volume Connections throw Noise Outlet Inlet Surface area Internal volume kw m 3 /s m db(a) kw m 3 /s m db(a) m 2 dm 3 kw SM161-46 14.8 2.7 19 59 15.4 2.88 37 58 1 3/8 1/2" 75 20 7 A1 SM161-66 P1 18.6 2.56 18 59 19.4 2.72 35 58 1 3/8 5/8" 112 30 10 Dia = 630mm SM161-86 Dia. = 630mm 21.4 2.56 33 58 1 3/8 5/8" 149 40 12 6 pole SM162-66 6 pole 37.4 5.1 18 62 FLC/SC = 39 5.44 35 61 1 5/8 5/8" 224 57 19 SM162-86 FLC/SC = 1.4/5A 1.5/4.5A 43.2 5.12 33 61 2 1/8 7/8" 299 77 24 SM163-66 input = 650W 56.2 7.66 18 64 input = 710W 58.7 8.18 35 63 2 1/8 1 1/8" 336 84 29 SM163-86 65 7.68 33 63 2 1/8 1 1/8" 446 112 39 SM201-66 P1 21.9 3.14 22 59 A2 SM201-86 Dia = 630mm Dia = 710mm 24.8 2.88 33 60 1 5/8 5/8" 187 50 14 SM202-66 6 pole FLC/ 43.8 6.28 22 62 6 pole FLC/ 44.6 5.94 34 63 2 1/8 7/8" 280 72 24 SM202-86 SC = 1.4/5A SC = 1.8/3A 49.4 5.76 33 63 2 1/8 1 1/8" 374 96 29 SM203-66 input = 650W 65.9 9.42 22 64 input = 620W 67.1 8.92 34 65 2 1/8 1 1/8" 470 106 39 Defrost power 22.2 2.98 34 60 1 3/8 5/8" 140 38 12 SM203-86 74.1 8.64 33 65 2 1/8 1 1/8" 561 140 43 SM242-66 A4 57 7.7 39 66 2 1/8 1 1/8" 336 87 24 SM242-86 Dia = 800mm 63.3 7.32 37 66 2 1/8 1 1/8" 448 115 29 SM243-66 8 pole FLC/ 85.8 11.6 39 68 2 1/8 1 1/8" 505 127 36 SM243-86 SC = 2.7/6.8A 95.8 11.02 37 68 2 x 2 1/8" 2 x 1 1/8" 673 168 43 SM244-66 input = 1000W 114.4 15.4 39 69 2 x 2 1/8" 2 x 1 1/8" 673 166 48 SM244-86 126.5 14.64 37 69 2 x 2 1/8" 2 x 1 1/8" 897 221 58 SM302-66 A4 63.4 8.18 41 66 2 1/8 1 1/8" 420 109 29 SM302-86 Dia = 800mm 71.4 7.88 40 66 2 1/8 1 1/8" 561 144 38 SM303-66 96 12.26 41 68 2 x 2 1/8" 2 x 1 1/8" 631 158 43 6 pole FLC/ SM303-86 107.4 11.88 40 68 2 x 2 1/8" 2 x 1 1/8" 841 210 58 SM304-66 SC = 2.7/6.8A 127.7 16.34 41 69 2 x 2 1/8" 2 x 1 1/8" 841 208 58 SM304-86 input = 1000W 142.6 15.78 40 69 2 x 2 1/8" 2 x 1 1/8" 1121 276 77 Model Fan/Motor entering -35 O C to + 20 O C R404A capacity Propeller volume throw Noise Outlet Connections Inlet Surface area Internal volume kw m 3 /s m db(a) m 2 dm 3 kw SM161-46 17.8 3.86 50 69 1 5/8 5/8 75 20 7 SM161-66 A3 23.2 3.62 46 69 1 5/8 5/8 112 30 10 SM161-86 Dia. = 630mm 26.8 3.52 45 69 1 5/8 5/8 149 40 12 4 pole SM162-66 46.8 7.24 46 72 2 1/8 1 1/8 224 57 19 FLC/SC = 3.8/14A SM162-86 52.8 7.06 45 72 2 1/8 1 1/8 299 77 24 input = 1890W SM163-66 70.2 10.86 46 74 2 1/8 1 1/8 336 84 29 SM163-86 80.9 10.58 45 74 2 1/8 1 1/8 448 112 29 SM201-66 A5 30.8 4.94 50 71 1 5/8 5/8 140 38 12 SM201-86 Dia. = 800mm 34.9 4.76 48 71 1 5/8 5/8 187 50 14 SM202-66 6 pole 61.8 9.88 50 72 2 1/8 1 1/8 280 72 24 SM202-86 FLC/SC = 3.4/15A 71 9.5 48 72 2 1/8 1 1/8 374 96 29 SM203-66 input = 2000W 93 14.82 50 74 2 x 2 1/8 2 x 1 1/8 420 106 36 SM203-86 105.8 14.26 48 74 2 5/8 1 1/8 561 140 43 SM242-66 A5 69.2 10.64 54 72 2 1/8 1 1/8 336 87 24 SM242-86 Dia. = 800mm 79 10.16 51 72 2 1/8 1 1/8 448 115 29 SM243-66 6 pole 104 15.96 54 74 2 x 2 1/8 2 x 1 1/8 505 127 36 SM243-86 FLC/SC = 3.4/15A 118.5 15.3 52 74 2 x 2 1/8 2 x 1 1/8 673 168 43 SM244-66 input = 2000W 139.2 21.28 54 75 2 x 2 1/8 2 x 1 1/8 673 166 48 SM244-86 154.1 20.34 51 75 2 x 2 1/8 2 x 1 1/8 897 221 58 SM302-66 86 13.2 53 78 2 x 2 1/8 2 x 7/8 420 109 29 SM302-86 A6 97.8 12.52 51 78 2 x 2 1/8 2 x 1 1/8 561 144 38 SM303-66 Dia. = 1000mm 6 pole 130 19.78 53 79 2 x 2 1/8 2 x 1 1/8 631 158 43 SM303-86 FLC/SC = 5.8/24A 146.1 18.82 51 79 2 x 2 1/8 2 x 1 1/8 841 210 58 SM304-66 input = 2625W 173.7 26.38 53 81 2 x 2 5/8 2 x 1 1/8 841 208 58 SM304-86 190.9 25.02 51 81 2 x 2 5/8 2 x 1 1/8 1121 276 77 Defrost power
8mm specification high/low temperature Low face velocity, low capacity, low air throw, compact unit Model SM161-48 Fan/Motor P1 entering -25 O C to + 20 O C R404A capacity Propeller volume throw Noise Fan/Motor entering -25 O C to + 20 O C R404A capacity Ducted Axial volume Connections throw Noise Outlet Inlet Surface area Internal volume kw m 3 /s m db(a) kw m 3 /s m db(a) m 2 dm 3 kw 12.2 2.7 19 59 A1 SM161-68 Dia. = 630mm 15.8 2.6 18 59 Dia. = 630mm 16.6 2.78 36 58 1 3/8 5/8 86 30 10 6 pole 6 pole SM161-88 FLC/SC FLC/SC = 19.2 2.68 34 58 1 3/8 5/8 114 40 12 SM162-68 = 1.4/5A 31.9 5.2 18 62 1.5/4.5A 33.2 5.56 36 61 1 5/8 5/8 171 57 19 SM162-88 input = 650W input = 710W 38.2 5.34 34 61 2 1/8 7/8 228 77 24 Defrost power 12.8 2.88 37 58 1 3/8 1/2 57 20 7 SM163-68 48 7.8 18 64 50 8.34 36 63 2 1/8 1 1/8 257 84 29 SM163-88 58.2 8.02 34 63 2 1/8 1 1/8 343 112 39 SM201-68 18.7 3.2 22 59 A2 18.8 3.02 34 60 1 3/8 5/8 107 38 12 SM201-88 SM202-68 P1 Dia. = 630mm 6 pole 37.4 6.38 22 62 Dia. = 710mm 6 pole FLC/SC = 21.97 37.6 2.92 6.04 33 34 60 63 1 5/8 2 1/8 5/8 7/8 143 214 50 72 14 24 SM202-88 FLC/SC 1.5/4.5A 44.2 5.86 33 63 2 1/8 1 1/8 286 96 29 SM203-68 = 1.4/5A input = 680W 56.6 9.58 22 62 input = 650W 57.2 9.06 34 65 2 1/8 1 1/8 321 106 36 SM203-88 66 8.78 33 65 2 1/8 1 1/8 428 140 43 SM242-68 A4 SM242-88 Dia. = 800mm 56.4 7.7 39 66 2 1/8 1 1/8 343 115 29 8 pole SM243-68 FLC/SC = 73.6 11.88 40 68 2 1/8 1 1/8 386 127 36 2.7/6.8A SM243-88 input = 86 11.6 39 68 1000W SM244-68 97.4 15.78 40 69 48.7 7.88 40 66 2 1/8 1 1/8 257 87 24 2 x 2 1/8 2 x 2 1/8 2 x 7/8 2 x 1 1/8 514 168 43 514 166 48 SM244-88 113.4 15.4 39 69 2 x 2 1/8 2 x 1 1/8 685 221 58 SM302-68 55 8.36 42 66 2 1/8 1 1/8 321 109 29 SM302-88 63.8 8.18 41 66 2 1/8 1 1/8 428 144 38 SM303-68 A4 Dia. = 800mm 2 x 2 2 x 82.5 12.54 42 68 1/8 7/8 8 pole 482 158 43 SM303-88 FLC/SC = 94.2 12.26 41 68 2.7/6.8A SM304-68 input = 108.2 16.72 42 69 1000W SM304-88 127.7 16.34 41 69 2 x 2 1/8 2 x 2 1/8 2 x 2 1/8 2 x 1 1/8 2 x 1 1/8 2 x 1 1/8 643 210 58 643 208 58 857 276 77 Rating Conditions and Correction Factors The duties shown in this catalogue are at Eurovent Standard 7/C/001, Standard Condition 2 - (-8 C saturated suction temp. (dewpoint), 0 C air entering). Capacities are based on DT1 the difference between the entering air temperature and the saturated suction temperature at the outlet of the cooler.
8mm specification high/low temperature Low face velocity, low capacity, low air throw, compact unit Model SM161-48 Fan/Motor entering -35 OC to + 20 OC R404A capacity Propeller volume throw Noise Outlet Connections Inlet Surface area Internal volume kw m 3 /s m db(a) m 2 dm 3 kw 15.2 3.94 51 69 1 3/8 1/2 57 20 7 SM161-68 20 3.8 49 69 1 5/8 5/8 86 30 10 SM161-88 A3 24 3.72 48 69 1 5/8 5/8 114 40 12 SM162-68 Dia. = 630mm 6 pole FLC/SC = 1.4/5A 40 7.62 49 72 2 1/8 7/8 171 57 19 SM162-88 input = 650W 48 7.42 48 72 2 1/8 1 1/8 228 77 24 SM163-68 60 11.42 49 74 2 1/8 1 1/8 257 84 29 SM163-88 72.2 11.14 48 74 2 1/8 1 1/8 343 112 39 SM201-68 26.2 5.14 52 71 1 5/8 5/8 107 38 12 SM201-88 SM202-68 SM202-88 A5 Dia. = 800mm 6 pole FLC/SC = 3.4/15A input = 2000W 30.6 52.8 62.6 4.94 10.26 9.88 50 52 50 71 72 72 1 5/8 2 1/8 2 1/8 5/8 1 1/8 1 1/8 143 214 286 50 72 96 14 24 29 SM203-68 78.4 15.4 52 74 2 x 2 1/8 2 x 7/8 321 106 36 SM203-88 93.6 14.82 50 74 2 5/8 1 1/8 428 140 43 SM242-68 57.6 10.84 55 72 2 1/8 1 1/8 257 87 24 SM242-88 SM243-68 SM243-88 A5 Dia. = 800mm 6 pole FLC/SC = 3.4/15A input = 2000W 69.6 86.4 104.8 10.54 16.24 15.86 53 55 53 72 74 74 2 1/8 2 x 2 1/8 2 x 2 1/8 1 1/8 2 x 1 1/8 2 x 1 1/8 343 386 514 115 127 168 29 36 43 SM244-68 118.5 21.66 55 75 2 x 2 1/8 2 x 1 1/8 514 166 48 SM244-88 135.7 21.1 53 75 2 x 2 1/8 2 x 1 1/8 685 221 58 SM302-68 72.8 13.68 55 78 2 x 2 1/8 2 x 7/8 321 109 29 SM302-88 SM303-68 SM303-88 SM304-68 A6 Dia. = 1000mm 6 pole FLC/SC = 5.8/24A input = 2625W 87.1 110.2 131.1 148.4 13.1 20.56 19.7 27.36 53 55 53 55 78 79 79 81 2 x 2 1/8 2 x 2 1/8 2 x 2 1/8 2 x 2 1/8 2 x 1 1/8 2 x 1 1/8 2 x 1 1/8 2 x 1 1/8 428 428 643 643 144 158 210 208 38 43 58 58 SM304-88 169.1 26.2 53 81 2 x 2 1/8 2 x 1 1/8 857 276 77 Defrost power For R407, DT1 is calculated from mid point evaporating temperature Note: All data for 400V, 3 phase, 50Hz supply. Noise levels are quoted at a distance of 3m from the units (free field).capacities are nominal, based on DT1 dew point and stated at Eurovent standard condition 2 (-8 Csaturated suction temp, 0 C air entering). Peripheral Heaters recommended for use on all ducted axial fan options when operating below freezing.
SM Drawings and Dimensions 750 Mounting CTRS 700 459 max 151.5 Heater removal 1000 min 210 6x O21 Mounting hole 1780 1358 Mounting CTRS E Ceiling MTD Base MTD B Aerofoil fan Prop fan A Refrig connection 844 Base MTD CTRS 2 BSP (M) drain conn 1355 Base MTD CTRS 15mm base MTG hole Heater removal 2000 min 210 1315 Mounting CTRS 3050 1315 Mounting CTRS 6x O21 Mounting hole E Min mm A Refrig connection SM 16 SM 20 SM 24 SM 30 800 1000 1200 1500 2 BSP (M) drain conn 1315 Base MTD CTRS 1315 Base MTD CTRS 15mm base MTG hole Heater removal 2000 min 210 1315 Mounting CTRS 4325 1275 Mounting CTRS 1315 Mounting CTRS 21 Mounting hole A Refrig connection 2 BSP (M) drain conn 1315 Base MTD CTRS 1315 Base MTD CTRS 1315 Base MTD CTRS 15mm base MTG hole Heater removal 2000 min 210 1315 Mounting CTRS 1275 Mounting CTRS 5600 1275 Mounting CTRS 1315 Mounting CTRS 21 Mounting hole A Refrig connection 2 BSP (M) drain conn 1315 Base MTD CTRS 1275 Base MTD CTRS 1275 Base MTD CTRS 1315 Base MTD CTRS 15mm base MTG hole