Ado Products BLOWING MACHINE ACCU-1 #9218 Rugged, powerfull and poratble, the AccuOne 9218 blowing machine can be used for both loose fill insulation and spray-on application. Designed for versatility and economical operation with the professional contractor in mind. The AccuOne 9218 is constructed with standardized parts and has the best production from a compact 100 volt machine. Features Specifications * Modular component design * Production Rate: 130 lbs per hour * Welded Steel construction * Weight: 17 lbs * Epoxy polyester coating * Dimensions: 20"W x 24"D x 48"H * 1 hp TEFC drive motor * Hopper Capacity: 8 cu. ft. * Recessed control panel * Airlock: 18" x " dia. * Remote switch with 100' cord * Blower Size: 10. amp/2-stage Part No. Description Price AC9218 Blows 130# per hour of cellulose $,200.00 ACCU-1 #9400 The AccuOne 9400 is a portable, all fiber blowing and spray machine, engineered with the busy contractor in mind. The variable speed blower and adjustable material feed maximum production from a 110-volt machine. Durable construction and corrosion resistant coating provide long life with minimal maintenance Features Specifications * Modular component design * Production Rate: 1800 lbs per hour * Welded Steel construction * Weight: 390 lbs * Epoxy polyester coating * Dimensions: 2"W x 38"D x 48"H * Material conditioning card system * Hopper Capacity: 14 cu. * 1 hp TEFC drive motor * Airlock: 10" x 10' dia * Recessed control panel * Blower Size: 12.9 amp/3-stage * Remote switch with 100' cord * Power Requirements: Dual input, 1 amp/120v * Variable speed agitator drive * Hose: 3" dia. Up to 400 feet Part No. Description Price AC9400 Blows 1800# per hour of cellulose $4,29.00 ACCU-1 #900 The AccuOne 900 provides the contractor with the most power and versatility in a portable mutistory blowing, spraying and fireproofing machine. Durable construction and corrosion resistant coating privide long life with minimal maintenace Features Specifications * Modular component design * Production Rate: 2100 lbs per hour * Welded Steel construction * Weight: 4 lbs * Epoxy polyester coating * Dimensions: 2"W x 38"D x 48"H * Material conditioning card system * Hopper Capacity: 14 cu. * 1 1/2 hp TEFC drive motor * Airlock: 10" x 10' dia * Recessed control panel * Blower Size: (2) 12.9 amp/3-stage * Remote switch with 100' cord * Power Requirements: Single input, 20amp/240V * Variable speed agitator drive * Hose: 3" dia. Up to 400 feet Part No. Description Price AC900 Blows 2100# per hour of cellulose $,99.00 1 Cecilia Circle Bloomington, MN 439 Page #1
3-Way Remote BLOWING MACHINE ACCESSORIES PUMPS & SWITCHES This switch is available as an option on all AccuOne insulations machines or as an easy-to-install conversion kit. With the 3-way remote switch, the user is given the added flexibility of controlling the blower and the agitator individually, allowing material to be cleared out of the hose. AccuOne Diaphragm Pump Portable, lightweight and 1 hp direct drive diaphragm pump with pressure regulator. Maximum pressure 27 psi. Maximum flow 4.4 gpm. AccuOne Wet Spray System Portable, lightweight diaphragm pump,suction hose, bypass hose, 100' pf pressure hose, and your choise of spray nozzle FOB PLANT Part No. Description Price LX0103A 3-Way Remote $.4 PM1290 Wet Spray System $1,29.00 PM1300 Diaphragm Pump $89.00 REDUCING NOZZLES Ado Products We carrty varied sizes and types of nozzles to choose from. Their design and solid steel or aluminum construction make them the best buy. FOB WAREHOUSE Part No. OD Size Description Price BN-2100 1" - /8" Brick Nozzle $23.29 BR-210 2" - 1" Aluminum Nozzle $23.4 BR-22 2" - 1 1/4" Aluminum Nozzle $24.92 RN-210 2" - 1" Steel Nozzle $1.19 RN-214 2" - 1 1/4" Steel Nozzle $17.49 RN-21 2" - 1 1/2" Steel Nozzle $17.49 1 Cecilia Circle Bloomington, MN 439 Page #2
Ado Products ANCHORS & ACCESSORIES STANDARD ANCHOR Anchors are glued in place and used to support rigid board and batt type insulation on walls, ceilings and roof applications. The anchors are copper coated 12-guage steel spindle on a 2" x 2" galvanized steel plate. Generally anchors installed on one day and insulation the next. Anchor and glue needs to be at room temperature when installed. Space anchors 12" to 1" apart for ceilings and walls. One gallon of adhesive used for 70-1000 pins. Part No. Description Price IS-01 IS-020 IS-02 IS-03 IS-04 IS-0 IS-0 IS-08 IS-09 IS-10 IS-11 1 /8" Length 2" Length 2 1/2" Length 3 1/2" Length 4 1/2" Length 1/2" Length 1/2" Length 8 1/2" Length 9 1/2" Length 10 1/2" Length 11 1/2" Length $49.3 $1.4 $3. $1.9 $47.2 $1.4 $8.80 $70.3 $81.90 $98.70 $113.40 le BLOWING HOSE & ACCESSORIES FLEX-PLUS HOSE m p This hose has a smooth bore interior, maximizing insulation flow. It is made of a pemium grade copolymer that is crush-proof and abrasion resistant. Blue FlexPlus is for rugged all purpose performance. Clear Flex-Plus is light weight and see through for easy monitoring of material flow. 2" X 0 Clear Flex-Plus Hose 2." X 0 Clear Flex-Plus Hose 3" X 0 Clear Flex-Plus Hose 3." X 0 Clear Flex-Plus Hose 4" X 0 Clear Flex-Plus Hose 2" X 0 Blue Flex-Plus Hose 2." X 0 Blue Flex-Plus Hose 3" X 0 Blue Flex-Plus Hose 3." X 0 Bluer Flex-Plus Hose 4" X 2 Blue Flex-Plus Hose Price a Description FC200 FC20 FC300 FC30 FC402 FG200 FG20 FG300 FG30 FG402 S Part No. $10.1 $133.94 $1. $187.79 $13.03 $10.1 $133.94 $1. $187.79 $13.03 FOAM SEALANTS & ACCESSORIES ENERFOAM The Swiss manufactured Pageris gun is the industry's top of the line gun. The Pageris guns work well with most forams including Enerforam. (Ask about our rebuild program) Features: -Exclusive propellant and formula eliminates waste and allows use of the entire can -Best temperature rating of any foeam (2 to 120 degrees.) -Best yield - 32 oz of Enerfoam yields 90 feet of 1/2" bead. -Fast curing - tack free and ready to trim in 20 minutes and fully cured in one hour. 1 Cecilia Circle Part No. Description ENER12 ENER2 ENER42 ENERCLEAN Enerfoam, 12 oz, w/straw top Enerfoam, 24 oz Enerfoam, 32 oz Enerclean, 10. oz cans Page #3 Price $0.00 $9.00 $14.00 $.0 Bloomington, MN 439
Ado Products No. 110 Taper Shank General Purpose High Speed Steel FRACTIONAL SIZES 118 Point Black Oxide Finish Designed for drilling in many different materials and a wide range of applications, these drills feature a surface treatment to improve chip flow and a taper shank made to American National Standard (Morse) dimensions. MfgNo Size Description Flute Lth. B&C No Price 3112 3/1 Taper Shank 3-1/8 044228 $.43 3113 13/4 Taper Shank 3-1/8 044230 $7.10 3114 7/32 Taper Shank 3-1/8 044231 $7.10 311 1/4 Taper Shank 3-1/8 04423 $8.38 311 1/4 Taper Shank 3-1/8 04423 $7. 3117 17/4 Taper Shank 3-1/8 044238 $7.97 3118 9/32 Taper Shank 3-1/8 044241 $7.97 3119 19/4 Taper Shank 3-1/8 044243 $10.1 3120 /1 Taper Shank 3-1/8 04424 $8.13 3121 21/4 Taper Shank 3-1/8 044248 $11.21 3122 11/32 Taper Shank 3-1/8 044241 $11.89 3123 23/4 Taper Shank 3-1/8 044242 $13.12 3124 3/8 Taper Shank 3-1/8 04424 $13.12 312 2/4 Taper Shank 3-1/8 04427 $13.2 312 13/32 Taper Shank 3-1/8 04420 $13.12 3127 27/4 Taper Shank 3-1/8 0442 $13.98 3128 7/1 Taper Shank 3-1/8 04427 $14.19 3129 29/4 Taper Shank 3-1/8 04429 $1. 3130 1/33 Taper Shank 3-1/8 044271 $1.28 3131 31/4 Taper Shank 3-1/8 044273 $1.98 3132 1/2 Taper Shank 3-1/8 04427 $1.2 3133 33/4 Taper Shank 3-1/8 044277 $1.98 3134 17/32 Taper Shank 3-1/8 044281 $1.98 313 3/4 Taper Shank 3-1/8 04428 $18.9 313 9/1 Taper Shank 3-1/8 044289 $18.0 3137 37/4 Taper Shank 3-1/8 044291 $20.14 3138 19/32 Taper Shank 3-1/8 044294 $19.79 3139 39/4 Taper Shank 3-1/8 044298 $21.09 3140 /8 Taper Shank 3-1/8 044301 $20.33 3141 41/4 Taper Shank 3-1/8 044303 $23.20 3142 21/32 Taper Shank 3-1/8 04430 $22.4 3143 43/4 Taper Shank 3-1/8 044310 $24.90 3144 11/1 Taper Shank 3-1/8 044311 $23.3 314 4/4 Taper Shank 3-1/8 044313 $2.93 314 23/32 Taper Shank 3-1/8 044314 $2.0 314 23/32 Taper Shank 3-1/8 044314 $2.0 314 23/32 Taper Shank 3-1/8 044314 $2.0 3147 47/4 Taper Shank 3-1/8 044317 $27.3 3148 3/4 Taper Shank 3-1/8 044318 $27.3 3149 49/4 Taper Shank 3-1/8 044319 $33.13 310 2/32 Taper Shank 3-1/8 044320 $32.93 311 1/4 Taper Shank 3-1/8 044322 $3.28 312 13/1 Taper Shank 3-1/8 04432 $34.0 313 3/4 Taper Shank 3-1/8 04432 $37.81 314 27/32 Taper Shank 3-1/8 044328 $3.9 314 1 Taper Shank 3-1/8 04433 $42.43 31 /4 Taper Shank 3-1/8 044332 $39.14 31 7/8 Taper Shank 3-1/8 044334 $37.81 31 7/8 Taper Shank 3-1/8 044334 $37.81 31 7/8 Taper Shank 3-1/8 044334 $37.81 31 7/8 Taper Shank 3-1/8 044334 $37.81 31 7/8 Taper Shank 3-1/8 044334 $37.81 31 7/8 Taper Shank 3-1/8 044334 $37.81 31 7/8 Taper Shank 3-1/8 044334 $37.81 Drills And Reamers No.190 F S&D Reduced Shank (Flatted Shank) General Purpose with 1/2" High Speed Steel FRACTIONAL SIZES 118 Point Black Oxide Coated Silver and Deming drills are widely used in machine shops, maintenance departments, Garages, body shops - wherever the maximum chuck capacity is ½". They are also popular in screw machines and machining centers where a short rigid drill is desirable. These tools are suitable for most materials including wood MfgNo Size Description Flute Lth. B&C No Price 2432 1/2 Reduced Shank 3-1/8 042724 $14.01 2433 33/4 Reduced Shank 3-1/8 04272 $14.01 2434 17/32 Reduced Shank 3-1/8 01284 $14.01 243 3/4 Reduced Shank 3-1/8 042731 $14.89 243 9/1 Reduced Shank 3-1/8 01287 $14.89 2437 37/4 Reduced Shank 3-1/8 01289 $1.99 2438 19/32 Reduced Shank 3-1/8 012874 $1.99 2439 39/4 Reduced Shank 3-1/8 042741 $1.7 3440 /8 Reduced Shank 3-1/8 012881 $1.7 2441 41/4 Reduced Shank 3-1/8 04274 $17.8 2442 21/32 Reduced Shank 3-1/8 012890 $17.8 2443 43/4 Reduced Shank 3-1/8 042749 $18.7 2443 43/4 Reduced Shank 3-1/8 042749 $18.7 2444 11/1 Reduced Shank 3-1/8 012902 $18.7 244 4/4 Reduced Shank 3-1/8 04273 $18.81 244 4/4 Reduced Shank 3-1/8 04273 $18.81 244 23/32 Reduced Shank 3-1/8 012909 $18.81 2447 47/4 Reduced Shank 3-1/8 04274 $20.0 2448 3/4 Reduced Shank 3-1/8 01291 $20.0 2449 49/4 Reduced Shank 3-1/8 012921 $21.87 240 2/32 Reduced Shank 3-1/8 01292 $21.87 241 1/4 Reduced Shank 3-1/8 04278 $27.31 242 13/1 Reduced Shank 3-1/8 01293 $22.98 243 3/4 Reduced Shank 3-1/8 04279 $28.20 244 27/32 Reduced Shank 3-1/8 01294 $23.77 24 /4 Reduced Shank 3-1/8 04271 $29.33 24 7/8 Reduced Shank 3-1/8 01293 $24.8 247 7/4 Reduced Shank 3-1/8 04272 $30.1 248 29/32 Reduced Shank 3-1/8 01299 $2.78 249 9/4 Reduced Shank 3-1/8 0129 $32.77 240 1/1 Reduced Shank 3-1/8 01299 $27.9 241 1/4 Reduced Shank 3-1/8 04277 $34.1 241 1/4 Reduced Shank 3-1/8 04277 $34.1 241 1/4 Reduced Shank 3-1/8 04277 $34.1 242 31/32 Reduced Shank 3-1/8 012978 $29.12 242 31/32 Reduced Shank 3-1/8 012978 $29.12 243 3/4 Reduced Shank 3-1/8 042770 $38.7 243 3/4 Reduced Shank 3-1/8 042770 $38.7 244 1 Reduced Shank 3-1/8 012987 $32.4 24 1-1/4 Reduced Shank 3-1/8 04277 $4.0 24 1-1/32 Reduced Shank 3-1/8 042777 $41.4 247 1-3/4 Reduced Shank 3-1/8 042779 $41.4 248 1-1/1 Reduced Shank 3-1/8 013007 $38.09 249 1-/4 Reduced Shank 3-1/8 042783 $42.81 2470 1-3/32 Reduced Shank 3-1/8 04278 $44.18 2471 1-7/4 Reduced Shank 3-1/8 042789 $4.12 1 Cecilia Circle Bloomington, MN 439 Page #4
HAND SOCKETS and DRIVE TOOLS 1/2" Drive 1/2" Drive Roundhead Ratchet Provides precise torque application Head design specifically for torque wrenches Enclosed head seals out dirt and contaminants Torque wrap design reduces stress on gear teeth and pawls for longer life 12-913 Roundhead Ratchet 00400 $40.3 12-914 Roundhead Ratchet 03399 $47.1 1/2" Drive Breaker Bar Carbon Steel, Chrome Plated Heads have Case-hardened pins Heads flex 180 degrees for easy access to nuts and bolts Long lever arm provides added torque removing stubborn nuts and bolts 12-917 Drive Breaker 004022 $27.3 12-918 Drive Breaker 004027 $30.80 1/2" Drive Extensions Allows greater flexibility for all your sockets and drive tools Ball detent securely holds all sockets on coupler 12-921 Drive Extension 004041 $7.2 12-923 Drive Extension 00401 $9.40 12-92 Drive Extension 0040 $12.41 12-927 Drive Extension 00407 $19.31 3/4" Drive 12 Point Standard Length Sockets The patented 12 point Standard length Sockets design drives the side of the fastener, not the corner, This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. 13-124 12-pt Std. Socket 01191 $10.92 13-12 12-pt Std. Socket 01198 $10.92 13-128 12-pt Std. Socket 011707 $10.99 13-130 12-pt Std. Socket 011723 $11.10 13-132 12-pt Std. Socket 011729 $11.18 13-134 12-pt Std. Socket 011739 $11.24 13-13 12-pt Std. Socket 011744 $11.24 13-138 12-pt Std. Socket 01173 $11.33 13-140 12-pt Std. Socket 01172 $12.08 12 Point Standard Length Sockets (Continued) 13-142 12-pt Std. Socket 011772 $13.39 13-144 12-pt Std. Socket 011783 $14.93 13-14 12-pt Std. Socket 011790 $1.3 13-148 12-pt Std. Socket 01179 $17.37 13-10 12-pt Std. Socket 011809 $19.04 13-12 12-pt Std. Socket 011819 $20.88 13-14 12-pt Std. Socket 011828 $21.8 13-1 12-pt Std. Socket 011832 $21.79 13-18 12-pt Std. Socket 011837 $23.8 13-10 12-pt Std. Socket 01184 $2.3 13-14 12-pt Std. Socket 0118 $29.7 13-1 12-pt Std. Socket 04749 $33.04 13-18 12-pt Std. Socket 04740 $3.1 13-170 12-pt Std. Socket 04741 $37.9 13-172 12-pt Std. Socket 04742 $4.8 13-174 12-pt Std. Socket 04743 $47.81 13-17 12-pt Std. Socket 04744 $3.3 Metric 12 Point Standard Length Sockets No-Slip design in forged cro-moly steel grips flats of fasteners not the corners. Lifetime manufacturer's warranty. Comes in molded tray and includes these standard length 12 point impact sockets: 10, 11, 12, 13, 14, 1, 1, 17, 18, 19, 21, 22, and 24mm MfgNo Description Flute Lth. B&C No Price 40-119 12-pt Std. Socket 027910 $11.41 40-120 12-pt Std. Socket 027912 $11.0 40-121 12-pt Std. Socket 027914 $11. 40-122 12-pt Std. Socket 02791 $11.2 40-123 12-pt Std. Socket 027921 $11. 40-124 12-pt Std. Socket 02792 $11.9 40-12 12-pt Std. Socket 027927 $11.73 40-12 12-pt Std. Socket 027933 $11.80 40-127 12-pt Std. Socket 027937 $11.80 40-128 12-pt Std. Socket 2328 $11.83 40-129 12-pt Std. Socket 2329 $11.90 40-130 12-pt Std. Socket 02794 $12. 40-132 12-pt Std. Socket 0279 $14.0 40-138 12-pt Std. Socket 1904 $18.21 40-141 12-pt Std. Socket 027984 $21.9 40-142 12-pt Std. Socket 23439 $22. 40-14 12-pt Std. Socket 027994 $27.8 40-10 12-pt Std. Socket 028004 $31.24 40-14 12-pt Std. Socket 2321 $37.30 40-1 12-pt Std. Socket 028017 $47.99 40-18 12-pt Std. Socket 2322 $2.13 40-10 12-pt Std. Socket 3-1/8 028027 $.32 12 Point Deep Sockets Manufactured from high alloy steel, utilizing the most upto-date manufacturing processes for greater strength and durability Socket wall dimesnions optimized for strength while providing access to restricted fastners 13-328 12-pt Deep Socket 03371 $17.1 13-330 12-pt Deep Socket 047478 $17.19 13-332 12-pt Deep Socket 01243 $17.39 13-334 12-pt Deep Socket 047480 $17.48 13-340 12-pt Deep Socket 047482 $17.7 ARMSTRONG 1 Cecilia Circle Bloomington, MN 439 Page #
Ball Valves BRONZE BALL VALVES FULL PORT BALL VALVES Gland Follower Design ISO-9002 10 WSP / 00 WOG 101-221 T-901 I.P.S 180 1/4" $7.1 101-222 T-901 I.P.S 180 3/8" $7.1 101-223 T-901 I.P.S 120 1/2" $.78 101-224 T-901 I.P.S 90 3/4" $9. 101-22 T-901 I.P.S 0 1/" $13.48 101-22 T-901 I.P.S 3 1-1/4" $2.93 101-227 T-901 I.P.S 4 1-1/2" $34.41 101-228 T-901 I.P.S 12 2" $40.43 101-229 T-901 I.P.S 8 2-1/2" $14.7 101-230 T-901 I.P.S 3" $21.3 101-233 S-901 I.P.S 120 1/2" $.78 101-234 S-901 I.P.S 90 3/4" $9. 101-23 S-901 I.P.S 0 1" $13.48 101-23 S-901 I.P.S 3 1-1/4" $2.93 101-237 S-901 I.P.S 24 1-1/2" $34.41 101-238 S-901 I.P.S 12 2" $40.43 FORGED BRASS BALL VALUES CONVENTIONAL PORT BALL VALVES ISO-9002 10 WSP / 400 WOG NSF APPROVED, UL LISTED 101-301 T-800 I.P.S 180 1/4" $4.1 101-302 T-800 I.P.S 180 3/8" $4.1 101-303 T-800 I.P.S 120 1/2" $3.31 FULL PORT BALL VALVES Gland Follower Design ISO-9002 10 WSP / 00 WOG 1/2" - 2" CSA CERTIFIED, UL LISTED, FM APPROVED, NSF APPROVED 101-01 T-1002 I.P.S 180 1/4" $4.3 101-02 T-1002 I.P.S 180 3/8" $4.3 101-03 T-1002 I.P.S 120 1/2" $3.7 101-04 T-1002 I.P.S 90 3/4" $.90 101-0 T-1002 I.P.S 0 1" $8. 101-0 T-1002 I.P.S 3 1-1/4" $1.97 101-07 T-1002 I.P.S 24 1-1/2" $21.81 101-08 T-1002 I.P.S 12 2" $29.0 101-09 T-1002 I.P.S 8 2-1/2" $118.01 101-070 T-1002 I.P.S 3" $174.39 FULL PORT BALL VALVES Heavy Pattern ISO-9002 10 WSP / 00, 00 WOG 101-003 T-1000 I.P.S 100 1/2" $.32 101-004 T-1000 I.P.S 0 3/4" $8. 101-00 T-1000 I.P.S 3 1" $12.74 101-00 T-1000 I.P.S 24 1-1/4" $24.32 101-007 T-1000 I.P.S 1 1-1/2" $31.3 FULL PORT BALL VALVES Regular Pattern ISO-9002 10 WSP / 00, 400 WOG 1/4" - 3" CSA CERTIFIED, 1/2" - 2" UL LISTED, FM APPROVED 101-023 T-1001 I.P.S 100 1/2" $3.48 101-024 T-1001 I.P.S 100 3/4" $.2 101-02 T-1001 I.P.S 0 1" $8.12 101-02 T-1001 I.P.S 20 1-1/4" $1.28 101-027 T-1001 I.P.S 20 1-1/2" $19.93 101-028 T-1001 I.P.S 20 2" $28.31 101-101 T-1001 I.P.S 100 1/4" $.2 101-102 T-1001 I.P.S 100 3/8" $.2 101-109 T-1001 I.P.S 2-1/2" $118.01 101-110 T-1001 I.P.S 4 3" $174.39 111-110 T-1001 I.P.S 4 3" $174.39 101-111 T-1001 I.P.S 2 4" $30.39 101-300 T-1001 I.P.S 200 1/8" $4.9 NSF APPROVED MODEL 101-043 S-1001 C X C 100 1/2" $3.48 101-044 S-1001 C X C 0 3/4" $.2 101-04 S-1001 C X C 3 1" $8.12 101-04 S-1001 C X C 24 1-1/4" $1.28 101-047 S-1001 C X C 1 1-1/2" $19.93 101-048 S-1001 C X C 10 2" $28.31 101-448 S-1001 C X C 10 2" $28.31 101-209 S-1001 C X C 2-1/2" $118.01 101-210 S-1001 C X C 4 3" $174.39 101-211 S-1001 C X C 4 4" $30.39 LARGE PORT BALL VALVES ISO-9002 10 WSP / 00, 00 WOG 1/2" - 2" CSA CERTIFIED, UL LISTED, FM APPROVED 101-103 T-900 I.P.S 100 1/2" $.37 101-104 T-900 I.P.S 0 3/4" $7.34 101-10 T-900 I.P.S 3 1" $10.78 101-10 T-900 I.P.S 24 1-1/4" $21.20 101-107 T-900 I.P.S 1 1-1/2" $27.11 101-108 T-900 I.P.S 10 2" $31.8 NSF APPROVED BRASS BALL VALVES NSF APPROVED BRASS BALL VALVES ISO-9002 10 WSP / 00, 00 WOG MEETS NSF STANDARD 1. 1/2" - 2" CSA, UL, FM 101-23 T-2000 I.P.S 100 1/2" $.89 101-24 T-2000 I.P.S 0 3/4" $7.74 111-24 T-2000 I.P.S 0 3/4" $7.74 101-2 T-2000 I.P.S 3 1" $12.89 101-28 T-2000 I.P.S 10 2" $3.73 1 Cecilia Circle Bloomington, MN 439 Page #
Ball Valves 3M Belts Portable Tool Belts 241D (Aluminum Oxide - X wt. Cloth) Excellent all around abrasive belt for everyday use. 240D (Aluminum Oxide - X wt. Cloth - open coat) Open coat resists loading Excellent for wood and soft substrates 241E/21E (Grades 0 and finer are 241E/Grades 40 and coarser are 21E) (Aluminum Oxide - XE wt. Cloth) High strength backing for tougher applications 0140 P0 234822 $0.98 EA 0141 P80 1117 $0.94 EA 0142 P100 23113 $0.83 EA 0143 P120 2341 $0.83 EA 1474 100 23241 $0.74 EA 297 P320 23493 $0.83 EA 299 P240 23494 $0.83 EA 200 P220 2349 $0.83 EA 201 P180 1192 $0.83 EA 202 P10 2307 $0.83 EA 212 P40 2349 $1.14 EA 214 P3 23497 $1.19 EA 2713 320 2307 $0.77 EA 2714 220 23402 $0.77 EA 271 180 174127 $0.77 EA 271 10 23403 $0.77 EA 2717 120 09873 $0.77 EA 2719 100 23404 $0.77 EA 2720 80 10302 $0.80 EA 2723 0 10397 $0.83 EA 272 0 2340 $0.8 EA 272 40 103904 $1.22 EA 2729 320 2340 $0.71 EA 2730 180 23407 $0.71 EA 2731 120 23077 $0.71 EA 2732 80 23408 $0.73 EA 2733 0 23409 $0.7 EA 277 180 23410 $0.81 EA 2778 120 103422 $0.81 EA 2779 100 23411 $0.81 EA 2780 80 147290 $0.84 EA 2781 0 23412 $0.8 EA 2782 0 23413 $0.90 EA 2783 40 23078 $1.28 EA 2784 3 23414 $1.32 EA 2892 120 23079 $0.71 EA 2893 100 1039 $0.71 EA 2894 80 1039 $0.73 EA Portable Tool Belts (Continued) 30290 40 23080 $1.10 EA 31074 180 23428 $0.71 EA 31170 0 23429 $0.7 EA 31823 P0 23431 $1.0 EA 3217 100 0728 $1.19 EA 3218 120 11412 $1.19 EA 3210 180 23081 $1.19 EA 3211 3 23432 $1.94 EA 3237 3 23433 $1.2 EA 32398 240 23434 $.71 EA 32399 240 2343 $0.77 EA 32407 100 2343 $0.71 EA 32417 40 23437 $1.10 EA 3417 80 3417 $1.2 EA 7103 0 234709 $0.71 EA 7222 40 234712 $1.1 EA 72227 0 234713 $0.79 EA 72228 80 234714 $0.77 EA 72229 120 23471 $0.74 EA 7732 3 234739 $1.20 EA 7798 220 23474 $0.74 EA 289 0 23420 $0.78 EA Scotch-Brite Surface Conditioning Discs (Hook & Loop) Scotch-Brite Surface Conditioning discs are best for finishing, cleaning and light deburring on flat metal surfaces. Attach and remove easily to 3M Hook & Loop backup pads. Used with the fillowing hand tools: Right Angle Random Orbit Dual Action A VFN -- Blue A MED -- Maroon A CRS 0043 A MED 10328 $1.78 EA 004 A MED 0811 $3.0 EA 0070 A CRS 09798 $2.03 EA 0071 A CRS 0812 $3.49 EA 04120 A CRS 009331 $1.1 EA 04124 A MED 021331 $1.01 EA 0427 A VFN 08190 $0.2 EA 04277 A VFN 021892 $1.01 EA 04303 A VFN 10328 $1.78 EA 0430 A VFN 09810 $3.0 EA 0748 A CRS 08190 $0.9 EA Scotch-Brite Surface Conditioning Discs (Continued) 0749 A MED 079173 $0.2 EA 14099 A VFN 094848 $1.49 EA 14100 A MED 09480 $1.49 EA 14101 A CRS 094849 $1.70 EA 2771 A CRS 234983 $1.70 EA 2772 A MED 23498 $1.49 EA 2773 A VFN 23029 $1.49 EA 2774 A CRS 234987 $2.03 EA 277 A MED 234989 $1.78 EA 277 A VFN 234991 $1.78 EA 2777 A CRS 234993 $3.49 EA 2778 A MED 23499 $3.0 EA 2779 A VFN 234997 $3.0 EA Scotch-Brite Coating Removal Discs (Hook & Loop) (Silicon Carbide - extra coarse) Made for right angle tools from aggressive Clean & Strip web. Non-loading design ideal for removing rust and coatings. Hook and Loop backing easily attaches to 3M disc pad holder. 183 S XCS 23491 $.13 EA 1838 S XCS 23493 $10. EA 18424 S XCS 23491 $.13 EA 18482 S XCS 23027 $.13 EA 18483 S XCS 193347 $.13 EA 1848 S XCS 1308 $10. EA Accessories- Hook and Loop Disc Pad Holders (Hook & Loop) For use with 3M Scotch-Brite Surface Conditioning and Removal Discs. MfgNo B&C No Price UM 04132 0189 $3.44 EA 080 000129 $13.10 EA 07494 034483 $2.9 EA 09448 234897 $13.7 EA 0940 08238 $14.24 EA 14111 1029 $13.10 EA 1 Cecilia Circle Bloomington, MN 439 Page #7
Table of Contents Categorized listing Ado Products 1 BLOWING MACHINE 1 ACCU-1 #9218 1 ACCU-1 #9400 1 ACCU-1 #900 1 BLOWING MACHINE 2 ACCESSORIES PUMPS & SWITCHES 2 REDUCING NOZZLES 2 ANCHORS & ACCESSORIES 3 STANDARD ANCHOR 3 BLOWING HOSE & 3 ACCESSORIES FLEX-PLUS HOSE 3 FOAM SEALANTS & 3 ACCESSORIES ENERFOAM 3 GREENFIELD INDUSTRIES 4 No. 110 Taper Shank 4 FRACTIONAL SIZES 4 Drills And Reamers 4 No.190 F S&D 4 Reduced Shank FRACTIONAL SIZES 4 ARMSTRONG HAND SOCKETS and DRIVE TOOLS 1/2" Drive 1/2" Drive Roundhead Ratchet 1/2" Drive Breaker Bar 1/2" Drive Extensions 3/4" Drive 12 Point Standard Length Sockets 12 Point Standard Length Sockets (Continued) Metric 12 Point Standard Length Sockets 12 Point Deep Sockets Ball Valves BRONZE BALL VALVES FULL PORT BALL VALVES Gland Follower Design ISO-9002 10 WSP / 00 WOG FORGED BRASS BALL VALUES CONVENTIONAL PORT BALL VALVES ISO-9002 10 WSP / 400 WOG NSF APPROVED, UL LISTED FULL PORT BALL VALVES Gland Follower Design ISO-9002 10 WSP / 00 WOG 1/2" - 2" CSA CERTIFIED, UL LISTED, FM APPROVED, NSF APPROVED FULL PORT BALL VALVES Heavy Pattern ISO-9002 10 WSP / 00, 00 WOG FULL PORT BALL VALVES Regular Pattern ISO-9002 10 WSP / 00, 400 WOG 1/4" - 3" CSA CERTIFIED, 1/2" - 2" UL LISTED, FM APPROVED NSF APPROVED MODEL LARGE PORT BALL VALVES ISO-9002 10 WSP / 00, 00 WOG 1/2" - 2" CSA CERTIFIED, UL LISTED, FM APPROVED NSF APPROVED BRASS BALL VALVES NSF APPROVED BRASS BALL VALVES ISO-9002 10 WSP / 00, 00 WOG MEETS NSF STANDARD 1. 1/2" - 2" CSA, UL, FM
3 3M 1 A ACCU-1 #9218 1 ACCU-1 #9400 1 ACCU-1 #900 1 Ado Products 1-3 ANCHORS & ACCESSORIES 3 ARMSTRONG 1-2 B Ball Valves 2-3 BLOWING HOSE & ACCESSORIES 3 BLOWING MACHINE 1 BLOWING MACHINE ACCESSORIES 2 E ENERFOAM 3 F FLEX-PLUS HOSE 3 FOAM SEALANTS & ACCESSORIES 3 G GREENFIELD INDUSTRIES 1 P PUMPS & SWITCHES 2 R REDUCING NOZZLES 2 S STANDARD ANCHOR 3 Table of Contents Alphabetized listing