12V Central Lock Universal Remote For Keyless Entry p/n 900.550 Kit include: Functions: Qty Description 1 Electronic Control Box 3 Remote Control 1 Siren 1 Main Loom 12 wires 1 LED Loom 2 wires 1 Input Loom 6 wires 1 Immobiliser Relay Socket 1 Immobiliser Relay 1 Shock Sensor 1 Bonnet Switch 1 Double sided sticky tape 1 Cable ties 1 Box size 210x145x100mm Remote Door locking Panic Alarm One point Immobiliser Shock Sensor Alarm Siren Central Lock Universal Remote For Keyless Entry kit. The kit is designed to operate on an existing vehicle with electric or pneumatic actuators. If the vehicle does not have actuators on the doors, then install and connect the electric VDO door locking kit p/n 880.700 (four actuators) for keyless entry.
To activate alarm 12V Keyless Central Locking, Immobiliser with Alarm p/n 900.550 Operator Instructions Press the button on the transmitter once, the siren would chirp once, the flash lights would gleam once, the central door locking system would lock up automatically, after 3 seconds, ACC ON and door switches would be detected; After 15 seconds, the shock sensor and the microwave sensor would be detected. (To avoid triggering the sensors when the power-window up). The LED indicator would be On Disarm: Press the button on the transmitter, the siren would chirp twice, the flash lights would gleam twice, the central door locking system would unlock automatically-. Press the button on the transmitter for 2 seconds to release the trunk. x Silent (Mute) Press the button x on the transmitter, the flash lights would gleam once, the siren doesn't chirp, the central door locking system locks up automatically. Locating: 1. Press the button on the transmitter once for 2 seconds, the flash lights would gleam for 15 seconds, and the siren would chirp continuously. 2. Press the button on the transmitter once again to stop. After that, the system is still in arm status. 3. In arm status, press the button on the transmitter once for 2 seconds, the flash lights would gleam for 10 seconds, but the siren would keep silent. 4. Press the button on the transmitter again to stop. After that, the system is still in arm status. 5. Anytime, press the button 0 on the transmitter ( with 4 buttons) once, the flash lights would gleam for 15 seconds, and the siren would chirp 15 times. Functions 1. In arm: in arm, the system will be triggered while the door is opened, the vehicle is hit or towed up, the siren would chirp loudly, the flash lights would gleam and the engine would be cut The siren will stop chirping automatically after 40 seconds and the system would re-arm again. 2.Siren Pause The siren would chirp loudly while triggered. Press the button on the transmitter once to stop the siren chirping. The system is still in arm. 3. Power Windows: Press the button on the transmitter on cc, the siren would chirp once, the flash lights would gleam once. The power window system would be closed one window by one window which time is 15 seconds. 4.Trigger Identify Function: If triggered by hitting, when disarmed, the siren would chirp un-continuously; If triggered by door opening or engine starting, when disarmed, the siren would chirp continuously 5. Anti-Hijacking: When moving, press the button x on the transmitter once, the flash lights would gleam urgently, press the button on the transmitter once again to take the system into. Anti-Hijacking status when the flash lights are gleaming quickly and the siren is chirping after 15 seconds, the engine would cut off. You can press the button once to cancel the Anti-hijacking function.
6. Central Door Locking System Automation: 12V Keyless Central Locking, Immobiliser with Alarm p/n 900.550 Operator Instructions cont d When the vehicle is moving, press the button or on the transmitter once to make the central door locking system lock or unlock but the alarm system is not working at the same time. All doors are closed, the car key is put into the key lock and turned to ACC ON position, after 15 seconds, you can press the footbrake once to make the central door locking system lock up. When the car key in the key lock is turned to ACC OFF, the central door locking system would be unlocked for the passengers off conveniently. NOTE: If any door is not closed completely or the car key in the key lock is not turned to ACC ON position, the central door locking system would not lock up automatically. 7. Door Unclosed well Warning (Optional) When parked, any door unclosed well, the car key in the key lock is not turned to ACC ON position, the flash lights would gleam for 30 seconds to warn the coming and going vehicles. When parked, any door unclosed well, the car key in the key lock is turned to ACC ON position, the flash lights would gleam continuously to warn the coming and going vehicles until all doors have been closed well. 8. Car Locating: a. Locating by Sound & Light: in arm, press the button x on the transmitter for 2 seconds, the siren would chirp for 15 seconds, at the same time the flash lights would gleam for 15 seconds also. b. Silently Locating: in arm, press the button on the transmitter for 2 seconds, the flash lights would gleam 10 times but the siren would keep silent. 9. Re-arm: After disarm, if any door is not opened or the engine is not be started within 25 seconds, the system will be in arm automatically 10. Engine Cut off: In arm, any trigger would make the engine cut off.
11. Parking on the Roadside Warning: 12V Keyless Central Locking, Immobiliser with Alarm p/n 900.550 Operator Instructions cont d For safe, when parked and any door opened, the flash lights would gleam to warn the coming and going vehicles. 12. Intruding warning record function: In arm, if it was triggered by door opening/engine cover, sensor or the car key, when disarm, the siren would chirp 5 sounds to warn: 13.Help Calling and Going Ahead: (For transmitter with 4 buttons) Anytime, press the button on the transmitter once, the siren would chirp for 15 seconds, and the flash lights would gleam for 15 seconds at the same time, to call help, press the on the transmitter to stop the siren chirping. 14. Power off Memory: When power off and later on again, the system can remember and remain the status before power off, which is very important. 15. The door unclosed arm reminding: Press the button on the transmitter once, the siren would be chirp once, the flash lights would be gleam once. If the door unclosed well, the siren would be beep 3 times to warn the door unclosed well, the system will warn after 30 seconds 16. Arm reminding When parked and closed all doors, after left the vehicle 10 seconds, the flash lights would gleams 3 times to remind the driver arming the vehicle. 17. How to Learn New Code Put the car key into the key lock and hold the foot break switch, then turn the key from OFF to ON eight times, the flash lights on, Press any button on one of the transmitters until the siren chirps once the flash lights off, finish the first transmitter code learning. Repeat above operation, you can learn max 4 transmitters once. When you learning the other 4 transmitters the old code will be covered.
12V Keyless Central Locking, Immobiliser with Alarm p/n 900.550 Operator Instructions cont d Central Door Locking System Time Option: If it s not electric central locking system and it s pneumatic, please open the module cover and change the jumper JP1 on the main PCB from ON to OFF before installing the car alarm and the central door locking system time would be changed from 0.5 to 3.5 seconds. Door unclosed well reminding: (optional) ACC - ON press the button x, on the transmitter for 2 seconds, the siren would chirp twice to set the door unclosed will reminding function, Press the button x on the transmitter for 2 seconds, the siren would chirp once to cancel the door unclosed well. Central Door Locking System Automatically Option: (ACC-ON) Press the button on the transmitter for 2 seconds, the siren would chirp twice, the central door locking system time function is on, press the on the transmitter for 2 seconds, the siren would chirp once the central door locking system time function is off.
12V Keyless Central Locking, Immobiliser with Alarm p/n 900.550 Car Alarm Installation Instruction The Module Installation: The installation location of the module usually is installed under the instrument panel or the disguise place where is over the driver's feet in the front of the driver seat. Find the module installation place first, and then find what the module will connect to, such as ACC, flash lights, brake light, illumination lights, power, etc. The wire connection should be made perfect. After all wires connected, connect the sockets by sequence 2p, 3p, 5p, 2p. Before re-assembly the decoration panels step by step, you should check and test the wire connection. Shock Sensor Installation & Test: After the module installation is finished, fix the shock sensor on the car. Adjust the sensitivity by the car size and your need. The sensitivity was set by our factory before off work, it is suggested that if not necessary, don' t change it. Shock Sensor Adjustment: There is a LED) in the shock sensor which would flash when the sensor triggered. There is a knob which you can adjust the sensitivity with a driver. Turn to the right H, make the sensitivity higher, turn to the left L to make it lower. The shock sensors should be fixed on the car body or instrument panel as tightly as possible, to ensure the sensors can feel the shock Car Alarm Electronic Specification: A. Car Alarm Module: Working Voltage: 12V+2V Static Current: 5mA (Exclusive of LED Display) LED Display Current: 5mA (at Interval) Shock Sensor Current: <1 ma Output Current (max.): Flash Lights: 5Ax2 Siren: 10A Central Lock System: 10A B. Transmitter: Working Voltage: 12V Static Current: 0mA Battery-: 27A/CR2016 Working Frequency: 315/433 MHz
12V Keyless Central Locking, Immobiliser with Alarm p/n 900.550 Trouble Shootings: * After the module fixed in the car, the siren sounded nonstop and could not be stopped by the transmitter. Check the socket connections correct or not. Check the wire connections correct or not. Check the switch positions correct or not. Check if the fuses are ok. Check the codes between the transmitter and the module matched each other or no\. If you have a spare battery siren, please check the switch positions are correct. * The alarm would be triggered and sound when the car parked on roadside in arm, and there is a heavy vehicle has, passed, Check whether the sensitivity of shock sensor is too high. Make the sensitivity lower * The siren did not sound while the alarm was triggered, Check the siren first. Check the wires connection between siren and module correct or not. * Can't use Remote Control by Transmitter and LED not light. Check the battery and the voltage measured by voltmeter should be >10V Whether the battery is released power too much? It is suggested the battery changed annually. Check the battery holding if rusted. Check the transmitter if water has entered. Check the transmitter for damages.
12V Keyless Central Locking, Immobiliser with Alarm p/n 900.550 Trouble Shootings cont d * Can' t use Remote Control but LED on, Check the battery and the voltage measured by voltmeter min. 10V. Whether the battery terminals for loose connection. Check the remote control frequency if it has changed. Check the remote control for water damage. Check the remote control if damaged. Note: You can use an OK transmitter instead of the doubted problem one to test and find the It is not necessary to open the case. * When in arm, the siren would sound within 10 seconds. Re-arm again after disarm, the same. Check the shock sensor(s) if ok Check the shock sensor whether is too sensitive. Check the shock sensor LED indicator. Check the wire connection, especially the brake light and illumination light, wire. Check the pin switches * The central lock system can t act normally even no action. Check the actuators mechanical & electrical function. Check wire connection and fuse. If the fuse is blown, there must be an installation problem (wire intermittent short circuit to earth, damaged insulation). Check the wire connection again for possible mistake. Please read the central lock system installation instruction and the diagram again.
Antenna 12V Keyless Central Locking with Alarm p/n 900.550 LED _ + 85 Central Door Time option, inside cover 0.5s 3.5s Red Green Blue Other sensors set Window Trigger Door Trigger Neg. Door Trigger Neg. Shock sensor ACC Immobiliser wire Ignition Coil Brake Pedal 12V 12V 30 87a Brake Lights 86 Bridge Links Control Module Brown Brown Red/Black H L Trunk Release + 12V To Negative side of brake switch Flash Lights Red Black 15A Fuse Pink /Black /Black /Black Unlock Lock To Vehicle Central Locking Siren Negative _ +12V Battery
Door Actuators Wiring Diagrams Examples Negative Trigger Positive Trigger 1 2 NC Com NO NC Com NO 1 2 3 4 5 6 /Black /Black /Black Universal Central Control Unit 1 2 3 4 5 6 /Black /Black /Black Cut-Off Cut-Off + 12V Universal Central Control Unit Positive/Negative Trigger Turn Jumper Bridge Off on PCB 3 4 Pneumatic Lock 1 2 3 4 5 6 /Black /Black /Black + 12V Universal Central Control Unit 1 2 3 4 5 6 /Black /Black /Black + 12V Green/Blue Main wire Brown Negative wire Door Lock Switch Red/Blue Positive wire