67 Square luinaire for installation in wall and ground recessed. Configuration: die-cast aluiniu structure, EN AB-47100 alloy (low copper content). Glass diffuser fixed to the aluiniu body through a robotic gluing syste. Double layer coating for high resistance to corrosion: the aluiniu coponents are painted with a double coat using powders which are copliant with QUALICOAT standards: a first layer of epoxy powder (with excellent cheical and echanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atospheric agents). The entire painting process of the aluiniu fitting starts fro coponents which have been sandblasted in advance to ake the surface ore porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces copletely, then rinses with deineralised water to reove any residue particles, subsequently a cheical conversion treatent is done to protect against rusting. Protection rating: IP67 In copliance with EN 60598-1 standards Class of insulation: III Installation: the luinaire is equipped with 300 of cable for a quick connection. Power LED is equipped with a dc/dc highly efficient converter that reoves electroagnetic interference and allows parallel wiring. The whole range is protected against polarity reversal and sudden voltage peak. Outdoor use requires suitable flexible cables. Installation requires a dedicated box separately. It is iportant to provide a >200 gravel layer or a drain syste (for concrete surface) to ensure good drainage and to avoid water stagnation. We recoend the use of a connection syste with a protection degree greater than or equal to the protection degree of the luinaire. EU Regulation 874/2012 - Illuination equipent energy classes A A A LED VERSION: Class A/A/A Luinaire supplied with integrated LED odules that cannot be replaced Recessed ground fitting Do not install in hollow areas Pre-wired with approx 300 of cable. Reote device required. H2O STOP kg Recessed wall fitting Installation requires a 20c water drainage layer (gravel). Protection against water ingress fro the cable (not for RGB versions) Static load: 1500Kg walk over Glass surface teperature <70 C Protection against ipact. IK 10-20,00 joule 47
sq Power LED / Narrow Bea 10 524012 A A A 6,2W/24Vdc Total power 7,5W l LED 730 l OUTPUT 545 100 20000 444 268 693 419 1233 745 2773 1677 11093 6709 cd / 1000 l = 5.0 5.0 = 5.0 5.0 524013 A A A 6,2W/24Vdc Total power 7,5W l LED 685 l OUTPUT 511 10 4x sq Power LED / iu Bea 40 524022 A A A 6,2W/24Vdc Total power 7,5W l LED 730 l OUTPUT 462 524023 100 40 2000 37 57 101 228 913 23 35 63 141 565 cd / 1000 l = 20.0 20.0 = 20.0 20.0 A A A 6,2W/24Vdc Total power 7,5W l LED 685 l OUTPUT 437 4x sq Mid-Power LED / Diffused light 524002 A A A MID- 5,2W/24Vdc Total power 6,8W l LED 813 l OUTPUT 447 100 524003 48 MID-POWER LED A A A MID- 5,2W/24Vdc Total power 6,8W l LED 774 l OUTPUT 426 320 7 10 18 41 163 2 3 5 10 42 cd / 1000 l = 55.0 55.0 = 55.0 55.0
sq RGB Low-Power LED / Diffused light 524004 A A A RGB LOW- 4,6W/3CH 24Vdc Total power 6W Wiring diagra and installation schee RGB 8 luinaires sq for each code 148 >> See Page 516 Wiring Diagra n.6 100 LOW 49
rc Power LED / Narrow Bea 10 524512 A A A 12,4W/24Vdc Total power 15W l LED 1459 l OUTPUT 1031 955 531 1493 830 2654 1476 5972 3321 23887 13284 cd / 1000 l = 5.0 5.0 = 5.0 5.0 100 20000 524513 A A A 12,4W/24Vdc Total power 15W l LED 1370 l OUTPUT 9 10 8x 200 rc Power LED / iu Bea 40 524522 A A A 12,4W/24Vdc Total power 15W l LED 1459 l OUTPUT 906 76 118 210 472 1888 46 73 129 290 1161 cd / 1000 l = 20.0 20.0 = 20.0 20.0 100 2000 524523 A A A 12,4W/24Vdc Total power 15W l LED 1370 l OUTPUT 857 40 8x 200 rc Mid-Power LED / Diffused light 524502 A A A MID- 11,7W/24Vdc Total power 15,8W l LED 1829 l OUTPUT 1060 524503 A A A MID- 11,7W/24Vdc Total power 15,8W l LED 1742 l OUTPUT 1010 100 MID-POWER LED 200 50 320 16 25 44 100 400 4 7 12 26 104 cd / 1000 l = 55.0 55.0 = 55.0 55.0
rc RGB Low-Power LED / Diffused light 524504 A A A RGB LOW- 10W/3CH 24Vdc Total power 10,5W Wiring diagra and installation schee RGB 4 luinaires rc for each code 148 >> See Page 516 Wiring Diagra n.6 100 LOW 200 51
ln Power LED / Narrow Bea 10 524112 A A A 9,3W/24Vdc Total power 11,8W l LED 1094 l OUTPUT 967 524113 710 1110 1973 4440 17761 444 694 1234 2776 11104 cd / 1000 l = 5.0 5.0 = 5.0 5.0 A A A 9,3W/24Vdc Total power 11,8W l LED 1027 l OUTPUT 916 50 10 16000 300 6x ln Power LED / iu Bea 40 524122 A A A 9,3W/24Vdc Total power 11,8W l LED 1094 l OUTPUT 737 58 90 161 362 1447 36 57 101 228 912 cd / 1000 l = 20.0 20.0 = 20.0 20.0 50 2000 524123 A A A 9,3W/24Vdc Total power 11,8W l LED 1027 l OUTPUT 697 40 300 6x ln Mid-Power LED / Diffused Light 524102 A A A MID- 7,8W/24Vdc Total power 10,5W l LED 1219 l OUTPUT 607 524103 A A A MID- 7,8W/24Vdc Total power 10,5W l LED 1161 l OUTPUT 578 50 300 52 MID-POWER LED 320 9 14 24 54 217 2 13 6 14 54 cd / 1000 l = 55.0 55.0 = 55.0 55.0
ln RGB Low-Power LED / Diffused Light 524104 A A A RGB LOW- 7,5W/3CH 24Vdc Total power 8W Wiring diagra and installation schee RGB 5 luinaires ln for each code 148 >> See Page 516 Wiring Diagra n.6 50 300 LOW 53
Accessories: 151 BOX FOR INSTALLATION 120 x 120 x H 95 152 BOX FOR INSTALLATION 220 x 120 x H 95 183 BOX FOR INSTALLATION 322 x 70 x H 95 120 100 120 100 70 95 120 220 322 153 SUCTION CUP TO PULL THE LUMINAIRE 87 POWER SUPPLY 10W/110 240V - 24Vdc IP20 CLASS II SELV. 1 POWER SUPPLY 10W/110 240V - 24Vdc IP67 CLASS II SELV. 144 POWER SUPPLY 17W/110 240V - 24Vdc (15W@110V) IP20 CLASS II SELV. 55 30 32 20 79 42 67 20 124 150 103 80 DIMMABLE: PUSH-DIM OR 1...10V See Page 514 Wiring Diagra n.4 acc. code prod. code 54
176 POWER SUPPLY 17W/110 240V - 24Vdc (15W@110V) IP67 CLASS II SELV. 147 POWER SUPPLY 20W/220 240V - 24Vdc IP67 CLASS II SELV. 155 POWER SUPPLY 50W/120 240V - 24Vdc IP67 CLASS II SELV. 110 POWER SUPPLY 70W/220 240V - 24Vdc IP67 CLASS II SELV EQ. 95 50 79 42 95 50 66 50 240 150 330 265 DIMMABLE: PUSH-DIM OR 1...10V See Page 514 Wiring Diagra n.4 156 POWER SUPPLY 96W /120 277V - 24Vdc IP67 CLASS II SELV. 148 POWER SUPPLY WITH DMX INTERFACE FOR RGB FIXTURES 55W/220 230V-3CHX24Vdc (3CHX18W) DMX CONTROLLER ALLOWED IP67 CLASS I SELV EQ. 142 DMX CONTROLLER; DIMMER SWITCH FOR RECESSED BOX (60 HOLE CENTRES) 143 DMX CONTROLLER; STAND-ALONE/PC INTERFACE 95 50 95 50 86 10 90 36 330 270 80 186 DMX CABLE - SHIELDED TWISTED PAIR WITH 110 Oh CONSTANT IMPEDANCE. 187 DMX SPLITTER - ELECTRONIC DEVICE TO REGENERATE THE DMX SIGNAL. 1 INPUT AND 7 OUTPUT. 12 24Vdc POWER SUPPLY TO BE ORDERED (87 OR 1 RECOMMENDED) 20 DMX 53 OUT 24V DMX IN 120 acc. code 151 152 183 153 87 1 144 176 147 155 110 156 148 142 143 186 187 prod. code 524002 1 1 2 2 2 6 9 13 524003 1 1 2 2 2 6 9 13 524004 8 524012 1 1 5 8 524013 1 1 5 8 524022 1 1 5 8 524023 1 1 5 8 524502 1 1 1 3 4 6 524503 1 1 1 3 4 6 524504 4 524512 1 2 4 524513 1 2 4 524522 1 2 4 524523 1 2 4 524102 1 1 1 4 6 9 524103 1 1 1 4 6 9 524104 5 524112 1 3 6 524113 1 3 6 524122 1 3 6 524123 1 3 6 fixtures for each power supply (Vin 220 240). Data in the chart are provided as a guide only. Please verify according to your installation. 55