19" The Spacial 3D 19" enclosure offer, for electronics and networks, comprises 2 ranges: - 1-body enclosures, depth 400 mm, with fi xed or swing rack. - 2-body enclosures, depths 400 and 500 mm. Technical characteristics c Textured polyester powder paint fi nish, colour grey RAL 7032. For other colours, please ask. c Degree of protection: IP 66. c External mechanical impact resistance: IK 08. c One-piece folded and welded body. Double plate thickness gutter shaped front profi le. c Perforated rails on door, drilled diameter on 25 mm pitch. c Glazed Securit glass door, easily removable and reversible with double thickness 20 mm return fold for excellent rigidity, 120 opening, 2 or 3 concealed hinges, 3 locking points from height 600 mm. c Enclosure supplied as standard with 3 mm double bar lock. c Polyurethane door seal. c M6 16 earthing screw for equipotential connection between enclosure door and body. c Wall mounting by fi xing lugs (to be ordered separately, see page 87). c For special versions, consult your local SAREL offi ce. 1-body enclosure with fixed rack c These enclosures are available with 19" pivoting or 19" fi xed rack. c Enclosures in 2 parts: body + door. c Heights: 4, 7, 9, 13 and 16 U with swing rack and 5, 8, 10, 14 and 17 U with fi xed rack. c Top and botton cable gland plates. c Fixed rack depht adjustable on 25 mm pitch with step slides. c Maximum load: 3 kg per unit. 19" 1-body enclosure 1-body enclosure, depth 400 mm, fixed rack no. external dimensions (mm) U (1) height width depth 5 300 600 400 54240 8 400 600 400 54241 10 500 600 400 54242 14 700 600 400 54243 17 800 600 400 54244 (1) With fi xed rack. 1-body enclosure, depth 400 mm, swing rack no. external dimensions (mm) U (2) height width depth 4 300 600 400 54230 7 400 600 400 54231 9 500 600 400 54232 13 700 600 400 54233 16 800 600 400 54234 1-body enclosure with swing rack (2) With swing rack. 84 Steel enclosure Spacial 3D When ordering in the UK please add the prefix ENN to the number. 084_085.indd 84 7/2/08 17:12:03
Base c Depth 150 mm. c Internal attachment point for fi xing of various supports. c Hinges and locking system with body. c Top and bottom cable gland plates. 19" 2-body enclosure Body c Usable depth 183 or 283 mm. c Two 19" uprights in treated steel, set back 65 mm from front face. c Height: 5, 8, 10, 14 and 17 U. c Intermediate body mounted on rear panel with 120º hinge. c Maximum load: 2 kg per unit. 2-body enclosure, depth 380 mm, with fixed rack no. external dimensions (mm) U (1) height width depth 5 300 600 380 54330 8 400 600 380 54331 10 500 600 380 54332 14 700 600 380 54333 17 800 600 380 54334 (1) With fi xed rack. 2-body enclosure, depth 380 or 480 mm 2-body enclosure, depth 480 mm, with fixed rack no. external dimensions (mm) U (1) height width depth (1) With fi xed rack. 5 300 600 480 54335 8 400 600 480 54336 10 500 600 480 54337 14 700 600 480 54338 17 800 600 480 54339 Steel enclosure Spacial 3D 85 When ordering in the UK please add the prefix ENN to the number. 084_085.indd 85 7/2/08 17:12:05
Dimensions 1-body 19" enclosure with fixed rack 1-body 19" enclosure with swing rack 19" fixed rack mounted on step slides Side view A A 12,5 mini 453 467 543 c 12,5 B 30,7 8,5 x 8,5 A A 600 C1 157 C 403 403 536,6 488,85 Detail A 453 467 485 80 Top view B (bar) (mm) C (travel) (mm) 200 100 250 150 300 200 400 300 2-body 19" enclosure A (mm) C (mm) C1 (mm) 54330 300 373 183 54335 400 373 183 54331 500 373 183 54336 700 373 183 54332 800 373 183 54337 300 473 283 54333 400 473 283 54338 500 473 283 54334 700 473 283 54339 800 473 283 86 When ordering in the UK please add the prefix ENN to the number. 086.indd 86 7/2/08 17:12:39
Universal enclosure for 19" application Technical characteristics c Two enclosure versions are offered: - with plain door. - with glazed door, Securit glass thickness 4 mm. c Textured polyester powder paint fi nish, colour grey RAL 7032. c Degree of protection IP 66 for all single door enclosures. c External mechanical impact resistance: - IK 10 for enclosures with plain door. - IK 08 for enclosures with glazed door. c Enclosure supplied without galvanised 19" chassis. Fixed or swing rack c Fixed rack comprising 2 uprights with fi xings. c Swing chassis opening to 120 with closure by 3 mm double bar insert. c Material: galvanised sheet steel, thickness 20/10 mm. c Maximum load: 3 kg per unit. Spacial 3D 19" enclosure to configure, fixed and swing rack selection guide enclosure dimensions empty enclosure fixed rack (*) swing rack* height (mm) width (mm) depth (mm) glazed door plain door no. U no. U 400 600 250 83532 83032 25911 8 25940 7 600 600 250 83529 83029 25912 12 25941 11 300 83530 83030 25912 12 25941 11 400 83539 83039 25912 12 25941 11 800 600 250 83556 83056 25913 17 25942 16 300 83557 83057 25913 17 25942 16 400 83544 83044 25913 17 25942 16 1000 600 250 83554 83054 25914 21 25943 20 400 83559 83059 25914 21 25943 20 800 250 83560 83060 - - 25944 20 300 83561 83061 - - 25944 20 400 83562 83062 - - 25944 20 1200 800 300 83564 83064 - - 25945 25 400 83567 83067 - - 25945 25 * Chassis not assembled. c Set of 4 wall fi xing lugs. c Mounted vertically or horizontally directly on enclosure rear panel. c Two lug types, steel and stainless steel 304, for 10 mm spacing from wall. c Permissible load: - in horizontal mounting: 180 kg; - in vertical mounting: 350 kg. c Supplied with fi xings and protection seals. Wall fixing lugs material 51206 steel 51207 stainless steel Steel enclosure Spacial 3D 87 When ordering in the UK please add the prefix ENN to the number. 087.indd 87 18/2/08 12:00:11
Accesories Cable gland plate selection guide for enclosures cable gland plate width (mm) depth (mm) standard with knock-outs in aluminium with membrane entries 600 200-250 51536 51546 51556 51566 600 300-400 51537 51547 51557 51567 800 250-300-400-51544 51554 51564 c IP 67. c Conforming to standard EN 50262. c Material: EPDM plastic. c Adapted to wall thicknesses 1 to 4 mm (0.5 to 2 mm for ref. 08831). c Quick installation with no tool required. c Application: see page 22. ISO IP 67 cable entries ISO drilling cable (mm) 08831 M12 12.5 3-5 08832 M16 16 5-7 08833 M20 20.3 7-10 08834 M25 25.3 10-14 08835 M32 32.4 14-20 08836 M40 40.7 20-26 08837 M50 50.3 26-35 c Conforming to NF C 32-201. c Copper/brass eyelet conforming to NF C 20-130. c Yellow/green PVC insulation. c Packaging unit: 10. Earth leads section eyelet lenght (mm) (mm 2 ) hole (mm) 21721 6 130 6.0 21715 6 160 6.4 21716 6 160 8.3 21725 10 250 6.4 21735 25 350 8.3 88 When ordering in the UK please add the prefix ENN to the number. 088_091.indd Sec1:88 18/2/08 12:01:27
c Composite material handle, attractive and ergonomic. c Extensive range of barrels enabling coverage of a wide range of requirements. c Easily installed to replace the standard lock. c Material: zamack. Key handle Key handle barrels with keys 51332 1242 E 51333 405 51334 421 51335 455 51336 2331 A 51337 2433 A 51338 3113 A c Two versions: - for door opening to 180. - standard 120. c Captive pin, indexed spring. c Set of 1 hinge, supplied with fi xings. c Material: body in zamak for ref. 51208, in treated sheet steel for ref. 51209, pin in aluminium. Door hinges hinge type 51208 opening to 180 51209 standard (120 ) 51208 51209 c To hold door open during work. c Mounted at the desired height on perforated rails of enclosure door. c Cannot be mounted in enclosures of height less than 400 mm (absence of perforated rails). c Locks the door at an opening angle of 120. c Material: polyamide 6. c Fixings included. Door stop description 51210 door stop c To control lighting, temperature control accessory, etc. c Direct fi xing in Spacial 3D enclosure using fi xings and support supplied. c N/C contact (on lock), 10 A/500 V. Door switch 51341 89 When ordering in the UK please add the prefix ENN to the number. 088_091.indd Sec1:89 18/2/08 12:01:32
c 2 plastic models for A4 format, 22 and 40 mm depth. c 1 plastic model for A3 format. c Attachment by double-sided tape. Plastic document pocket document pocket format depth (mm) 21322 A4 22 21323 A4 40 21317 A3 35 c Enable mounting of 19" accessories. c Screws, washers and nuts in three pack types: - 50 M6 screws+washers+cage-nuts, - 50 M6 screws+washers, - 50 separate cage-nuts. 19" chassis fixings description 17127 M6 16 screws and washers 14629 M6 cage-nuts 11916 M6 screws+washers+cage-nuts c Set of 2 Euronorm type slides. c Fixed between front and rear uprights of 19" chassis. c Material: treated steel. c Heel: 0 mm. c Permissible load: 15 kg. 19" 2 U partial fixed slides 11265 44 140 c Fixing on front 19" uprights. c Heel: 5 mm. c Sheet steel, painted grey RAL 7035. c Permissible load: 20 kg. 19" 2 U fixed modem support plate plate depth (mm) 11271 250 11272 380 90 When ordering in the UK please add the prefix ENN to the number. 088_091.indd Sec1:90 18/2/08 12:01:34
c Fixing on front 19" uprights. c Sheet steel, painted grey RAL 7035. c Permissible load: 5 kg. c It is delivered with telescopic runners and the fi xings necessary for assembly. 19" 2 U telescoping modem support plate plate ref. plate depth (mm) 11270 250 c All accessories necessary for electronics equipment, 19" and network, can be consulted page 3/202 and 3/203. 19" chassis accessories 19" front faces 91 When ordering in the UK please add the prefix ENN to the number. 088_091.indd Sec1:91 18/2/08 12:01:35
Accesories Cable gland plate selection guide for enclosures cable gland plate width (mm) depth (mm) standard with knock-outs in aluminium with membrane entries 600 200-250 51536 51546 51556 51566 600 300-400 51537 51547 51557 51567 800 250-300-400-51544 51554 51564 c IP 67. c Conforming to standard EN 50262. c Material: EPDM plastic. c Adapted to wall thicknesses 1 to 4 mm (0.5 to 2 mm for ref. 08831). c Quick installation with no tool required. c Application: see page 22. ISO IP 67 cable entries ISO drilling cable (mm) 08831 M12 12.5 3-5 08832 M16 16 5-7 08833 M20 20.3 7-10 08834 M25 25.3 10-14 08835 M32 32.4 14-20 08836 M40 40.7 20-26 08837 M50 50.3 26-35 c Conforming to NF C 32-201. c Copper/brass eyelet conforming to NF C 20-130. c Yellow/green PVC insulation. c Packaging unit: 10. Earth leads section eyelet lenght (mm) (mm 2 ) hole (mm) 21721 6 130 6.0 21715 6 160 6.4 21716 6 160 8.3 21725 10 250 6.4 21735 25 350 8.3 88 When ordering in the UK please add the prefix ENN to the number. 088_091.indd Sec1:88 18/2/08 12:01:27
c Composite material handle, attractive and ergonomic. c Extensive range of barrels enabling coverage of a wide range of requirements. c Easily installed to replace the standard lock. c Material: zamack. Key handle Key handle barrels with keys 51332 1242 E 51333 405 51334 421 51335 455 51336 2331 A 51337 2433 A 51338 3113 A c Two versions: - for door opening to 180. - standard 120. c Captive pin, indexed spring. c Set of 1 hinge, supplied with fi xings. c Material: body in zamak for ref. 51208, in treated sheet steel for ref. 51209, pin in aluminium. Door hinges hinge type 51208 opening to 180 51209 standard (120 ) 51208 51209 c To hold door open during work. c Mounted at the desired height on perforated rails of enclosure door. c Cannot be mounted in enclosures of height less than 400 mm (absence of perforated rails). c Locks the door at an opening angle of 120. c Material: polyamide 6. c Fixings included. Door stop description 51210 door stop c To control lighting, temperature control accessory, etc. c Direct fi xing in Spacial 3D enclosure using fi xings and support supplied. c N/C contact (on lock), 10 A/500 V. Door switch 51341 89 When ordering in the UK please add the prefix ENN to the number. 088_091.indd Sec1:89 18/2/08 12:01:32
c 2 plastic models for A4 format, 22 and 40 mm depth. c 1 plastic model for A3 format. c Attachment by double-sided tape. Plastic document pocket document pocket format depth (mm) 21322 A4 22 21323 A4 40 21317 A3 35 c Enable mounting of 19" accessories. c Screws, washers and nuts in three pack types: - 50 M6 screws+washers+cage-nuts, - 50 M6 screws+washers, - 50 separate cage-nuts. 19" chassis fixings description 17127 M6 16 screws and washers 14629 M6 cage-nuts 11916 M6 screws+washers+cage-nuts c Set of 2 Euronorm type slides. c Fixed between front and rear uprights of 19" chassis. c Material: treated steel. c Heel: 0 mm. c Permissible load: 15 kg. 19" 2 U partial fixed slides 11265 44 140 c Fixing on front 19" uprights. c Heel: 5 mm. c Sheet steel, painted grey RAL 7035. c Permissible load: 20 kg. 19" 2 U fixed modem support plate plate depth (mm) 11271 250 11272 380 90 When ordering in the UK please add the prefix ENN to the number. 088_091.indd Sec1:90 18/2/08 12:01:34
c Fixing on front 19" uprights. c Sheet steel, painted grey RAL 7035. c Permissible load: 5 kg. c It is delivered with telescopic runners and the fi xings necessary for assembly. 19" 2 U telescoping modem support plate plate ref. plate depth (mm) 11270 250 c All accessories necessary for electronics equipment, 19" and network, can be consulted page 3/202 and 3/203. 19" chassis accessories 19" front faces 91 When ordering in the UK please add the prefix ENN to the number. 088_091.indd Sec1:91 18/2/08 12:01:35