PRODUCT CATALOG 21 ST EDITION

BE PRESSURE SUPPLY PRODUCT CATALOG 21 ST EDITION POWER WASHERS GENERATORS WATER PUMPS CLEANING EQUIPMENT & ACCESSORIES.

2 TABLE TABLE OF CONTENTS OF CONTENTS CONNECTION GUIDE 1 TABLE OF CONTENTS 2 SECTION 1 HIGH PRESSURE UNITS 4 PRESSURE WASHERS VERTICAL DIRECT DRIVE UNITS 4.75 HP Briggs & Stratton 6 HORIZONTAL DIRECT DRIVE UNITS 5 & 6 HP Honda 7 5.5 & 6.5 HP Honda 8 7 HP Robin 9 9 HP Honda 10 11 HP Honda 11 13 HP Honda 12 13.5 HP Robin 13 Truck Mounted Pressure Washers 14 STAINLESS STEEL DIRECT DRIVE 5.5 & 6.5 HP Honda 15 9 HP Honda 16 13 HP Honda 17 BELT DRIVE UNITS 13 HP Honda -Steel Frame 18 13 HP Honda -Staineless Steel Frame 19 6.5 HP Baby CoolDrive 20 13 HP CoolDrive 21 20 & 24 HP Belt Drive 22 24 HP GEAR DRIVE UNITS 23 ELECTRIC POWERED UNITS 1.5 HP Baldor 24 2 HP Baldor 25 5-10 HP Baldor 26 2 HP Pack-A-Round 27 PTO DRIVEN PRESSURE WASHER 28 GENERATORS 2600 Watt Honda Generators 30 2800, 3100, & 4800 Watt Honda 31 HYDROSTATIC TESTERS 40 HOT WATER UNITS 42 3 & 4.2 GAL. AIR COMPRESSORS 43 5 & 8 Gallon Air Storage 43 SECTION 2 SPECIALTY CLEANING UNITS 44 WATER BROOMS Large Water Broom 46 Small Water Broom 46 FLAT SURFACE CLEANERS POLYPROPYLENE 12 Multi-Use Whirl-A-Way 48 16 Whirl-A-Way 49 18 Whirl-A-Way 50 20 Whirl-A-Way 51 ABS & NYLON WITH QUICK CASTOR 22 Whirl-A-Way 52 STAINLESS STEEL 20 Whirl-A-Way 53 24 Whirl-A-Way 54 TELESCOPING WANDS Fiberglass 60 Aluminum 62 Telescoping Wand Accessories 63 SECTION 3 MATERIAL HANDLING GOODS 66 Dolleys and Trolleys 68 Hand Carts and Hydraulics 69 Utility and Tool Carts 70 Jacks 71 Trailer Jacks 72 WATER PUMPS General Purpose Water Pumps 32 Trash Pumps & Nylon Transfer Pump 33 High Pressure Pumps 34 Sludge Pump Kit & Hose Kits 34 Polypro & Aluminum Camlcoks 36

TABLE OF CONTENTS 3 SECTION 4 PRESSURE WASHER PUMPS 74 REPLACEMENT PUMP PROGRAM 76 CAT PUMPS 2DX, 3DX 78 2SF 78 66DX 78 5CP 78 Seal Kits,Valve Kits, & Accessories 79 COMET PUMPS BXD 80 AXD 80 LWD 81 LWS 81 ZWDK 81 ZWD 81 FW 82 HWS 82 TW 82 Seal Kits,Valve Kits, & Accessories 83 GENERAL PUMPS TP 84 EZ/TX 84 T 84 TS 84 Seal Kits,Valve Kits, & Accessories 85 GEARBOXES 86 SECTION 5 BASIC ACCESSORIES 88 SECTION 6 VALVES AND FITTINGS 112 Unloaders 114 Ball Valves 116 Valves 118 Orings 120 Sure-Lock Couplers 120 Couplers and Plugs 121 Screw-Type Fittings 122 Garden Hose and Nozzle Fittings 123 SECTION 7 KITS & CUSTOM ACCESSORIES 124 Hose Reels 126 Engine Parts 128 Sandblast Kits 129 Power Accessories 130 Fluid Accessories 131 Chemical Injectors & Kits 132 Brushes and Kits 134 Gutter Cleaners & Accessory Kits 135 Pressure Gauges 136 Filters and Strainers 137 Miscellaneous Water Accessories 138 Garden Hose Accessories 139 Garden Spray Guns 140 Garden Hose 141 Electrical Accessories 142 Replacement Blocks and Feet 143 Tires, Wheels, & Parts Bins 144 BRABER EQUIPMENT FEATURE 145 WARRANTY POLICIES 146 COMPANY PROFILE 147 Spray Guns 90 Wands and Lances 94 Wands and Handles 96 Low Pressure Sprayers 97 Packaged Parts Display Racks 98 Packaged Parts 100 Spray Nozzles, Quick Connect 104 Spray Nozzles, Meg 105 Rotary Nozzles 106 Nozzles & Nozzle Holders 108 High Pressure Hoses 110 Low Pressure Hoses 111

SECTION 1 HIGH PRESSURE UNITS 5 PRESSURE WASHERS VERTICAL DIRECT DRIVE UNITS 4.75 HP Briggs & Stratton 6 HORIZONTAL DIRECT DRIVE UNITS 5 & 6 HP Honda 7 5.5 & 6.5 HP Honda 8 7 HP Robin 9 9 HP Honda 10 11 HP Honda 11 13 HP Honda 12 13.5 HP Robin 13 Truck Mounted Pressure Washers 14 STAINLESS STEEL DIRECT DRIVE 5.5 & 6.5 HP Honda 15 9 HP Honda 16 13 HP Honda 17 BELT DRIVE UNITS 13 HP Honda -Steel Frame 18 13 HP Honda -Staineless Steel Frame 19 6.5 HP Baby CoolDrive 20 13 HP CoolDrive 21 20 & 24 HP Belt Drive 22 24 HP GEAR DRIVE UNITS 23 ELECTRIC POWERED UNITS 1.5 HP Baldor 24 2 HP Baldor 25 5-10 HP Baldor 26 2 HP Pack-A-Round 27 PTO DRIVEN PRESSURE WASHER 28 GENERATORS 2600 Watt Honda Generators 30 2800, 3100, & 4800 Watt Honda 31 WATER PUMPS General Purpose Water Pumps 32 Trash Pumps & Nylon Transfer Pump 33 High Pressure Pumps 34 Sludge Pump Kit & Hose Kits 34 Polypro & Aluminum Camlcoks 36 HYDROSTATIC TESTERS 40 HOT WATER UNITS 42 3 & 4.2 GAL. AIR COMPRESSORS 43 5 & 8 Gallon Air Storage 43

6 PRESSURE WASHERS 4.75HP BRIGGS & STRATTON VERTICAL 2,350 PSI 2.0 GPM BLACK & RED POWDER COATED FRAME Powered by a reliable 4.75 Briggs & Stratton vertical direct drive gas engine. Reliable Comet VRX axial pump with thermal protector to prevent pump from overheating. Comes with a 25 steel braided hose. # Model# Engine Pump PSI GPM 1 BEVB-2404BWCOMX MODEL SHOWN 4.75 HP Briggs & Stratton Intek Comet VRX2022G 2,350 PSI 2.0 72 lbs Additional Features 4,700 Cleaning Units Composite Tires Chemical Injector Powder Coated Frame Anti-Vibration Rubber Foot Thermal Valve Accessories The accessory kit includes a 2950 PSI front entry spray gun, a 36 insulated split lance, 25 Steel braided hose and an adjustable variable nozzle. Comet VRX2022G 85.149.048B 19 221 2 21

PRESSURE WASHERS 5 & 6 HP GAS POWERED DIRECT DRIVE UNITS UP TO 2800 PSI 2.5 GPM 7 BLACK POWDER COATED STEEL FRAME Powered by a reliable Honda 5HP GC160 or 6HP GC190 gas engine. Commercial grade axial pump with oil sight glass, and oil drain plug. EZ Grip Garden Hose Fittings. Durable powder coated steel frame with antivibration rubber foot and frame cut-outs to easily change engine oil. # Model# Engine Pump PSI GPM 3 PE-2005HWCOMB MODEL SHOWN Honda 5.0 HP GC160 Comet BXD2525G 2,500 2.5 80 lbs PE-2005HWCOMXE Honda 5.0 HP GC160 Comet AXD2525G 2,500 2.3 80 lbs 4 PE-2760HWCOMB Honda 6.0 HP GC190 Comet BXD2528G 2,800 2.5 80 lbs PE-2760HWCOMX Honda 6.0 HP GC190 Comet AXD2527G 2,700 2.5 80 lbs Additional Features 6,250-7,000 Cleaning Units Low Pressure Chemical Injector 25 steel wire braided hose Quick Connect nozzles in 0, 15, 40, and soap nozzle 2,950 PSI front entry spray gun 36 Insulated Lance 10 tubed pneumatic tires Comet BXD2525G 85.149.080B (5HP) Comet BXD2825G 85.149.081B (6HP) Comet AXD2325G 85.149.049B (5HP) Comet AXD2527G 85.149.026B (6HP) 19 221 2 21

8 PRESSURE WASHERS 5.5 & 6.5 HP GAS POWERED DIRECT DRIVE UNITS UP TO 2700 PSI UP TO 3.0 GPM BLACK POWDER COATED STEEL FRAME Powered by a commercial grade 5.5HP Honda GX160 or 6.5HP Honda GX200 gas engine with steel gas tank. Industrial triplex pump with oil sight glass, oil drain plug, and adjustable unloader.* Durable powder coated steel frame with antivibration rubber foot and frame cut-outs to easily change engine oil. # Model# Engine Pump PSI GPM 5 PE-2055HWCOMX* Honda 5.5 HP GX160 Comet AXD2325G 2,500 2.3 95 lbs 6 PE-2055HWCAT Honda 5.5 HP GX160 Cat 2DX27GS 2,000 2.7 95 lbs 7 PE-2055HWCOM Honda 5.5 HP GX160 Comet LWD-K3020G 2,000 3.0 95 lbs 8 PE-2055HWGEN Honda 5.5 HP GX160 General TP-2530 2,000 3.0 95 lbs 9 PE-2765HWCOMX* Honda 6.5 HP GX200 Comet AXD2527 2,700 2.5 95 lbs 10 PE-2565HWCAT Honda 6.5 HP GX200 Cat 3DX29GS1 2,500 3.0 95 lbs 11 PE-2565HWCOM MODEL SHOWN Honda 6.5 HP GX200 Comet LWD-K3025GS 2,500 3.0 95 lbs 12 PE-2565HWGEN Honda 6.5 HP GX200 General TP-2530 2,500 3.0 95 lbs * Models PE-2055HWCOMX & PE-2765HWCOMX are equipped with a commercial axial pump. Additional Features 5,400-7,500 Cleaning Units 25 steel wire braided hose Thermal Relief Valve Protects the Quick Connect nozzles in 0, 15, 40, Pump from Overheating** and soap nozzle Industrial 5,000 PSI spray gun Low Pressure Chemical Injector 36 Insulated Lance 10 tubed pneumatic tires ** Feature available only on PE-2055HWCAT, PE-2055HWCOM, PE-2055HWGEN, PE-2565HWCAT, PE-2565HWCOM, & PE-2565HWGEN Comet AXD2325G 85.149.049B (5.5HP) Comet AXD2527G 85.149.026B (6.5HP) 19 221 2 21 Comet LWD-K3020G 85.149.009B (5.5HP) Comet LWD-K3025G 85.149.015B (6.5 HP) Cat 2DX27GS 85.119.018B (5.5HP) Cat 3DX29GS 85.119.028B (6.5HP) General TP-2530 85.139.020B

PRESSURE WASHERS 7.0 HP ROBIN/SUBARU DIRECT DRIVE 2,500 PSI 3.0 GPM 9 BLACK POWDER COATED FRAME Powered by an industrial grade Robin/ Subaru 7HP engine with a quiet one-pull start. Commercial triplex pump with oil sight glass, oil drain plug, and built in unloader. Durable powder coated steel frame with antivibration rubber foot and frame cut-outs to easily change engine oil. # Model# Engine Pump PSI GPM 13 PE-2570RWCOM MODEL SHOWN 7HP Robin Comet LWD- K3025G 2,500 3.0 80 lbs 14 PE-2570RWGEN 7HP Robin General TP2530 2,500 3.0 80 lbs Additional Features 7,500 Cleaning Units 25 steel wire braided hose Quick Connect nozzles in 0, 15, 40, Industrial 5,000 PSI rear entry and soap nozzle spray gun Low Pressure Chemical Injector 10 tubed pneumatic tires 36 Insulated Lance Comet LWD-K3025G 85.149.015B General TP2530 85.139.020B 19 221 2 21

10 PRESSURE WASHERS 9 HP GAS POWERED DIRECT DRIVE UNITS 3000 PSI 3.0 GPM BLACK & RED POWDER COATED STEEL FRAME Powered by a commercial grade 9HP Honda GX270 engine with steel gas tank and engine oil alert. LOW OIL ALERT Clear bowl water filter for easy inspection. Industrial triplex pump with oil sight glass, oil drain plug, and adjustable unloader. Comet ZWDK 3030 (built-in unloader cartridge) Part # 1215032600 PE-3009HWCOMK COMES WITH A BUILT-IN UNLOADER! The benefits of a built in unloader: A built in unloader has built in plumbing and an easily replaceable unloader cartridge. Redesigned powder coated steel frame has 3 lbs more bulk. Comes with anti-vibration rubber foot and frame cut-outs to easily change engine oil. # Model# Engine Pump Unloader PSI GPM 15 PE-3009HWCOMK MODEL SHOWN Honda 9.0 HP GX270 (Oil Alert) Comet ZWDK 3030 Built In 3,000 3.0 165 lbs 16 PE-3009HWCOMZ Honda 9.0 HP GX270 (Oil Alert) Comet ZWD3030G Separate Mount 3,000 3.0 165 lbs Additional Features 9,000 Cleaning Units 13 tubed pneumatic tires Low Pressure Chemical Injector Thermal Relief Valve Protects the Quick Connect nozzles in 0, 15, 40, and Industrial 5,000 PSI spray gun Pump from Overheating soap nozzle Safety Relief Valve 50 steel wire braided hose 36 Insulated Lance Comet ZWD3030G 85.149.011B Comet ZWDK 3030 85.149.078B (Built-in) 25 31 24

PRESSURE WASHERS 11 HP GAS POWERED DIRECT DRIVE UNITS 3000 PSI 4.0 GPM 11 BLACK & RED POWDER COATED STEEL FRAME Powered by a commercial grade 11HP Honda GX340 engine with steel gas tank and engine oil alert. LOW OIL ALERT Clear bowl water filter for easy inspection. Industrial triplex pump with oil sight glass, oil drain plug, and adjustable unloader. Comet ZWDK 4036 (built-in unloader cartridge) Part # 1215039000 PE-3011HWCOMK COMES WITH A BUILT-IN UNLOADER! The benefits of a built in unloader: A built in unloader has built in plumbing and an easily replaceable unloader cartridge. Redesigned powder coated steel frame has 3 lbs more bulk. Comes with anti-vibration rubber foot and frame cut-outs to easily change engine oil. # Model# Engine Pump Unloader PSI GPM 17 PE-3011HWCOMK MODEL SHOWN Honda 11 HP GX340 (Oil Alert) Comet ZWDK 4036 Built In 3,000 4.0 165 lbs 18 PE-3011HWGENTX Honda 11 HP GX340 (Oil Alert) General TX1510 Built In 3,000 4.0 165 lbs 19 PE-3011HWCAT Honda 11 HP GX340 (Oil Alert) Cat 66DX40 Separate Mount 3,000 4.0 165 lbs 20 PE-3011HWCOMZ Honda 11 HP GX340 (Oil Alert) Comet ZWD4030G Separate Mount 3,000 4.0 165 lbs 21 PE-3011HWGEN Honda 11 HP GX340 (Oil Alert) General TX1510G8 Separate Mount 3,000 4.0 165 lbs Additional Features 12,000 Cleaning Units 13 tubed pneumatic tires Low Pressure Chemical Injector Thermal Relief Valve Protects the Quick Connect nozzles in 0, 15, 40, Industrial 5,000 PSI spray gun Pump from Overheating and soap nozzle Safety Relief Valve 50 steel wire braided hose 36 Insulated Lance *Separate mounted unloaders shown below. Comet ZWDK4036G 85.149.075B (Built In) Comet ZWD4030G 85.149.012B Cat 66DX40 85.119.014B General TX1510G8 85.139.045B (Built In) General TX1510G8 85.139.002B 25 31 24

12 PRESSURE WASHERS 13 HP GAS POWERED DIRECT DRIVE UNITS UP TO 4000 PSI UP TO 4.0 GPM BLACK & RED POWDER COATED STEEL FRAME Powered by a commercial grade 13HP Honda GX390 engine with steel gas tank and oil alert engine. LOW OIL ALERT Clear bowl water filter for easy inspection. Industrial triplex pump with oil sight glass, oil drain plug, and adjustable unloader. Comet ZWDK 4036 (built-in unloader cartridge) Part # 1215039000 * PE-4013HWPCOMK & PE-4013HWPGENTX COME WITH A BUILT-IN UNLOADER! The benefits of a built in unloader: A built in unloader has built in plumbing and an easily replaceable unloader cartridge. Redesigned powder coated steel frame has 3 lbs more bulk. Comes with anti-vibration rubber foot and frame cut-outs to easily change engine oil. # Model# Engine Pump Unloader PSI GPM 22 PE-4013HWPCOMK* Honda 13 HP GX390 Pull Start (Oil Alert) Comet ZWDK 4036 Built In MODEL SHOWN 3,600 4.0 175 lbs 23 PE-4013HWPGENTX* Honda 13 HP GX390 Pull Start (Oil Alert) General TX1510 Built In 3,700 4.0 175 lbs 24 PE-4013HWPCAT Honda 13 HP GX390 Pull Start (Oil Alert) Cat 66DX35 Separate Mount 4,000 3.5 175 lbs 25 PE-4013HWPCOMZ Honda 13 HP GX390 Pull Start (Oil Alert) Comet ZWD4040G Separate Mount 4,000 4.0 175 lbs 26 PE-4013HWPGEN Honda 13 HP GX390 Pull Start (Oil Alert) General EZ4040G Separate Mount 4,000 4.0 175 lbs 27 PE-4013HWECAT Honda 13 HP GX390 Elec. Start (Oil Alert) Cat 66DX35 Separate Mount 4,000 3.5 175 lbs 28 PE-4013HWECOMZ Honda 13 HP GX390 Elec. Start (Oil Alert) Comet ZWD4040G Separate Mount 4,000 4.0 175 lbs 29 PE-4013HWEGEN Honda 13 HP GX390 Elec. Start (Oil Alert) General EZ4040G Separate Mount 4,000 4.0 175 lbs Additional Features 14,000 to 16,000 Cleaning Units 13 tubed pneumatic tires Low Pressure Chemical Injector Thermal Relief Valve Protects the Quick Connect nozzles in 0, 15, 40, and Industrial 5,000 PSI spray gun Pump from Overheating soap nozzle Safety Relief Valve 50 steel wire braided hose 36 Insulated Lance Separate mounted unloaders shown below. Comet ZWD4040G 85.149.022B Comet ZWDK4036 85.149.075B (Built-In) General EZ4040G 85.139.021B General TX1510 85.139.045B (Built In) Cat 66DX35 85.119.025B 25 31 24

PRESSURE WASHERS 13.5 HP ROBIN/SUBARU DIRECT DRIVE UP TO 4000 PSI 4.0 GPM 13 BLACK & RED POWDER COATED STEEL Powered by an industrial grade Robin/ Subaru 13.5HP gas engine. Industrial triplex pump with oil sight glass, oil drain plug, externally mounted EZ Start adjustable unloader.* Clear bowl water filter for easy inspection. Redesigned powder coated steel frame has 3 lbs more bulk. Comes with anti-vibration rubber foot and frame cut-outs to easily change engine oil. # Model# Engine Unloader Pump PSI GPM 30 PE-4013RWPGENTX* 13.5HP Robin Built-in General TX1510 3,700 4.0 175 lbs 31 PE-4013RWPCOMZ MODEL SHOWN 13.5HP Robin Separate Mount Comet ZWD4040G 4,000 4.0 175 lbs * PE-4013RWGENTX comes with a built-in unloader. Additional Features 14,800-16,000 Cleaning Units 13 tubed pneumatic tires Thermal Relief Valve Protects the Quick Connect nozzles in 0, 15, 40, Pump from Overheating and soap nozzle Safety Relief Valve 50 steel wire braided non-marking hose Low Pressure Chemical Injector Industrial 5,000 PSI spray gun 36 Insulated Lance Comet ZWD4040G 85.149.022B General TX1510 85.139.045B (Built-in) 25 31 24

14 TRUCK MOUNT PRESSURE WASHERS TRUCK MOUNT PRESSURE WASHERS TRUCK MOUNT PRESSURE WASHERS Turn any Power Washer into a truck or trailer mount unit. Has 4 rubber feet that can be bolted through to mount to trailer bottom. Powered by a commercial grade 5.0HP Honda GC160 5.5HP Honda GX160 or 6.5HP Honda GX200 gas engine. Part # Dimensions 85.600.016 W13.625 x L18.125 x H1.75 Industrial triplex pump with oil sight glass, oil drain plug, and adjustable unloader.* Durable powder coated steel frame with four rubber feet and frame cut-outs to easily change engine oil. # Model# Engine Pump PSI GPM 32 PE-2005HTCOMXE Honda 5.0 HP GC160 Comet BXD 2525 2,500 2.5 80 lbs 33 PE-2055HTCOM MODEL SHOWN Honda 5.5 HP GX160 Comet LWD-K3020G 2,000 3.0 95 lbs 34 PE-2055HTGEN Honda 5.5 HP GX160 General TP-2530 2,000 3.0 95 lbs 35 PE-2565HTGEN Honda 6.5 HP GX200 General TP-2530 2,500 3.0 95 lbs 36 PE-2765HTCOMX Honda 6.5 HP GX200 Comet AXD2527 2,700 2.5 95 lbs 37 PE-3011HTCOMZ Honda 11 HP GX340 Comet ZWD4030G 3,000 4.0 165 lbs * Model PE-2005HTWCOMXE PE-2765HTCOMX is equipped with a commercial axial pump. Additional Features 6,000-12,000 Cleaning Units Steel wire braided hose Thermal Relief Valve Protects the Quick Connect nozzles in 0, 15, 40, Pump from Overheating** and soap nozzle Industrial 5,000 PSI spray gun*** Low Pressure Chemical Injector 36 Insulated Lance ** Feature available only on PE-2055HTCOM, PE-2055HTGEN, PE-2565HTGEN, and PE-3011HTCOMZ *** PE-2005HTCOMXE comes with a 2950 PSI front entry spray gun Comet ZWD4030G 85.149.012B (11HP) Comet BXD2525G 85.149.080B (5HP) Comet LWD-K3020G 85.149.009B (5.5HP) General TP-2530 85.139.020B (5.5 & 6.5HP) Comet AXD2527G 85.149.026B (6.5HP)

PRESSURE WASHERS 5.5 & 6.5 HP GAS POWERED DIRECT DRIVE UNITS UP TO 2500 PSI UP TO 3.0 GPM 15 STAINLESS STEEL COMPACT FRAMES Powered by a commercial grade 5.5HP Honda GX160 or 6.5HP Honda GX200 engine with steel gas tank and oil alert engine. LOW OIL ALERT Industrial triplex pump with oil sight glass, oil drain plug, and adjustable unloader. Compact frame designed for easy carrying and transport. Comes with a 50 foot steel wire braided hose. Durable Stainless Steel Frame with solid welded anti-vibration rubber foot. # Model# Engine Pump Unloader PSI GPM 38 PE-2055HWSCAT Honda 5.5 HP GX160 Cat 2DX27GS Built In 2,000 2.7 105 lbs 39 PE-2055HWSCOM Honda 5.5 HP GX160 Comet LWD-K3020G Built In 2,000 3.0 105 lbs 40 PE-2055HWSGEN Honda 5.5 HP GX160 General TP-2530 Built In 2,000 3.0 105 lbs 41 PE-2565HWSCAT Honda 6.5 HP GX200 Cat 3DX29GS1 Built In 2,500 3.0 105 lbs 42 PE-2565HWSCOM MODEL SHOWN Honda 6.5 HP GX200 Comet LWD-K3025G Built In 2,500 3.0 105 lbs 43 PE-2565HWSGEN Honda 6.5 HP GX200 General TP-2530 Built In 2,500 3.0 105 lbs 44 PE-2565HWSCOMSP* Honda 6.5 HP GX200 Comet LWD-3025G Separate Mount 2,500 3.0 105 lbs 45 PE-2565HWSGENSP* Honda 6.5 HP GX200 General TP2530 Separate Mount 2,500 3.0 105 lbs Additional Features 5,400-7,500 Cleaning Units Low Pressure Chemical Injector 36 Insulated Lance Thermal Relief Valve Protects the Quick Connect nozzles in 0, 15, 40, and Industrial 5,000 PSI spray gun Pump from Overheating soap nozzle 50 steel wire braided hose 10 tubed pneumatic tires Comet LWD-K3020G 85.149.009B (5.5) General TP-2530 85.139.020B (5.5 & 6.5) Cat 2DX27GS 85.119.018B (5.5) Cat 3DX29GS 85.119.028B (6.5HP) Comet LWD-3025G 85.149.004B (6.5) General TP2530 85. 139.020SPB (6.5) Comet LWD-K3025G 85.149.015B (6.5) 27 33 27

16 PRESSURE WASHERS 9 HP GAS POWERED DIRECT DRIVE UNITS 3000 PSI 3.0 GPM STAINLESS STEEL COMPACT FRAMES Powered by a commercial grade 9HP Honda GX270 engine with steel gas tank and oil alert engine. LOW OIL ALERT Industrial triplex pump with oil sight glass, oil drain plug, adjustable unloader, and external bypass. Compact frame designed for easy carrying and transport. Durable Stainless Steel Frame with solid welded anti-vibration rubber foot. Comes with a 50 foot steel wire braided hose. # Model# Engine Pump Unloader PSI GPM 46 PE-3009HWCCOMZ MODEL SHOWN 9HP Honda GX270 Comet ZWD3030G Separate Mount 3,000 3.0 130 lbs Additional Features 9,000 Cleaning Units Low Pressure Chemical Injector 36 Insulated Lance Thermal Relief Valve Protects the Quick Connect nozzles in 0, 15, 40, Industrial 5,000 PSI spray gun Pump from Overheating and soap nozzle Safety Relief Valve 50 steel wire braided hose 10 tubed pneumatic tires Comet ZWD3030G 85.149.011B 27 33 27

PRESSURE WASHERS 13HP GAS POWERED DIRECT DRIVE UNITS 4000 PSI UP TO 4.0 GPM 17 STAINLESS STEEL FRAMES PACKAGING: Boxed Powered by a commercial grade 13HP Honda GX390 engine with steel gas tank and oil alert engine. LOW OIL ALERT Industrial triplex pump with oil sight glass, oil drain plug, EZ Start adjustable unloader, and external bypass. Clear bowl water filter for easy inspection. EZ Grip quick connect coupler. HEAVY DUTY FRAME What makes this frame heavy duty? Anti-vibration rubber foot 2mm thick tubing on handle and bumper Solid welded stainless steel foot Threaded axle and bolted on tires # Model# Engine Pump PSI GPM 47 PE-4013HWPSCAT Honda 13 HP GX390 Cat 66DX35 4,000 3.5 162 lbs 48 PE-4013HWPSCOMZ MODEL SHOWN Honda 13 HP GX390 Comet ZWD4040G 4,000 4.0 162 lbs 49 PE-4013HWPSGEN Honda 13 HP GX390 General EZ4040 4,000 4.0 162 lbs Additional Features 14-16,000 Cleaning Units Low Pressure Chemical Injector 36 Insulated Lance Thermal Relief Valve Protects the Quick Connect nozzles in 0, 15, 40, Industrial 5,000 PSI spray gun Pump from Overheating and soap nozzle Safety Relief Valve 50 steel wire braided hose 13 tubed pneumatic tires Comet ZWD4040G 85.149.022B General EZ4040 85.139.021B Cat 66DX35 85.119.025B 27 33 27

18 PRESSURE WASHERS 13HP 4000 PSI STEEL BELT DRIVE UNITS 3.5 GPM GREY POWDER COATED STEEL FRAMES LOW OIL ALERT Powered by a commercial grade 13HP Honda GX390 engine with steel gas tank and oil alert engine. Industrial triplex pump with oil sight glass, oil drain plug, and EZ Start adjustable unloader. Clear bowl water filter for easy inspection. PULLEY SYSTEM. Dual cogged B belt system to help prevent slippage. Pneumatic tire with threaded bolt on axle. Durable grey powder coated steel with solid welded anti-vibration rubber foot. # Model# Engine Pump PSI GPM 50 PE-4013HWBCOM MODEL SHOWN Honda 13 HP GX390 Oil Alert Comet HW3540S 4,000 3.5 200 lbs Additional Features 14,000 Cleaning Units 13 tubed pneumatic tires Low Pressure Chemical Injector Thermal Relief Valve Protects the Quick Connect nozzles in 0, 15, 40, and Industrial 5,000 PSI spray gun Pump from Overheating soap nozzle Safety Relief Valve 50 steel wire braided hose 36 Insulated Lance Comet HW3540S 85.149.031AB 27 33 27

13HP STAINLESS STEEL BELT DRIVE UNITS UP TO 4000 PSI UP TO 4.0 GPM 19 STAINLESS STEEL FRAMES LOW OIL ALERT Powered by a commercial grade 13HP Honda GX390 engine with steel gas tank and oil alert engine. Industrial triplex pump with oil sight glass, oil drain plug, and EZ Start adjustable unloader. Clear bowl water filter for easy inspection. PULLEY SYSTEM. Dual cogged B belt system to help prevent slippage. Pneumatic tire with threaded bolt on axle. Durable stainless steel frame with solid welded anti-vibration rubber foot. # Model# Engine Pump PSI GPM 51 PE-3513HWBSCAT Honda 13 HP GX390 Oil Alert Cat 5CP3120 3,500 4.0 200 lbs 52 PE-4013HWBSCOMA MODEL SHOWN Honda 13 HP GX390 Oil Alert Comet HW3540 4,000 3.5 200 lbs 53 PE-3513HWBSGEN Honda 13 HP GX390 Oil Alert General TS1511 3,500 4.0 200 lbs Additional Features 14,000 Cleaning Units 13 tubed pneumatic tires Low Pressure Chemical Injector Thermal Relief Valve Protects the Quick Connect nozzles in 0, 15, 40, and Industrial 5,000 PSI spray gun Pump from Overheating soap nozzle Safety Relief Valve 50 steel wire braided hose 36 Insulated Lance Comet HW3540S 85.149.031AB General TS1511 85.139.005AB Cat 5CP3120 85.119.021AB 27 33 27

20 PRESSURE WASHERS 6.5HP 2500 PSI BELT DRIVE UNITS 3.0 GPM Industrial triplex pump with oil sight glass, oil drain plug, adjustable unloader and external bypass system. LOW OIL ALERT Powered by a commercial grade 6.5HP Honda GX200 engine with steel gas tank and oil alert engine. QUICK REMOVE COVER. Stainless steel belt guard removes easily in 20 seconds with 1 hand-tightening knob. No tools are required. COOLER PUMP. Cool air is propelled over the pump, reducing the heat by 25%. AIR VENTS. Cool air is drawn into the unit through the outer air vents. Durable stainless steel frame with solid welded antivibration rubber foot. PULLEY SYSTEM. Laser aligned patented pulley fanning system creates cooling air flow and helps prevent slippage. # Model# Engine Pump PSI GPM 54 CD-2565HWBSCOM MODEL SHOWN Honda 6.5 GX200 Engine Comet LWS3025 2,500 3.0 122 lbs Additional Features 7,500 Cleaning Units 5,000 PSI spray gun 10 Pneumatic Tires Thermal Relief Valve Protects the Quick Connect tips in 0, 15, 40, 50 steel wire braided hose Pump from Overheating and soap nozzle Adjustable Unloader 36 Insulated Lance with Molded Grip Patented Cooldrive technology Clear bowl filter for easy inspection Low Pressure Chemical Injector Comet LWS3025 85.149.065B 27 33 27

PRESSURE WASHERS 13HP STEEL BELT DRIVE UNITS UP TO 4000 PSI UP TO 4.0 GPM 21 LOW OIL ALERT Powered by a commercial grade 13HP Honda GX390 engine with steel gas tank and oil alert engine. Industrial triplex pump with oil sight glass, oil drain plug, and EZ Start adjustable unloader. QUICK REMOVE COVER. Stainless steel belt guard removes easily in 20 seconds with 3 hand-tightening knobs. No tools are required. COOLER PUMP. Cool air is propelled over the pump, reducing the heat by 25%. AIR VENTS. Cool air is drawn into the unit through the outer air vents. PULLEY SYSTEM. Laser aligned patented pulley fanning system creates cooling air flow and helps prevent slippage. Industrial strength stainless steel frame with foam-filled tires, aluminum mags, and solid welded anti-vibration rubber foot. # Model# Engine Pump PSI GPM 55 CD-3513HWBSCAT Honda 13 HP GX390 Oil Alert Cat 5CP3120 3,500 4.0 210 lbs 56 CD-4013HWBSCOMA MODEL SHOWN Honda 13 HP GX390 Oil Alert Comet HW3540 4,000 3.5 210 lbs 57 CD-3513HWBSGEN Honda 13 HP GX390 Oil Alert General TS1511 3,500 4.0 210 lbs Additional Features 14,000 Cleaning Units Low Pressure Chemical Injector Clear bowl filter for easy inspection Thermal Relief Valve Protects the Quick Connect nozzles in 0, 15, 40, 50 steel wire braided, Pump from Overheating and soap nozzle non-marking hose Safety Relief Valve 36 Insulated Lance with Molded Grip Patented Cooldrive technology Adjustable Unloader Industrial 5,000 PSI spray gun. Comet HW3540S 85.149.031B General TS1511 85.139.005B Cat 5CP3120 85.119.021B 27 33 27

22 PRESSURE WASHERS up to 24 HP GAS POWERED BELT DRIVE UNITS UP TO 5000 PSI UP TO 10.0 GPM STAINLESS STEEL 4 WHEEL FRAME Powered by an industrial grade 20 or 24HP Honda engine with steel gas tank, engine oil alert, and an electric start engine. LOW OIL ALERT Industrial triplex pump with oil sight glass, oil drain plug, adjustable unloader, and external bypass hose. PULLEY SYSTEM. Dual cogged B belt system to help prevent slippage. INDUSTRIAL STRENGTH STAINLESS STEEL ROLL CAGE FRAME: Comes with four 13 pneumatic tires, threaded bolt-on axle, and a large 4 gallon top mounted gas tank with drip tray. General TS2021 85.139.026B General T5050 85.139.018B Comet TW5050S 85.149.059B Comet HWS5040S 85.149.030B Comet TW10025 85.149.064B Comet TW8030 85.149.062B # Model# Engine Pump PSI GPM 58 PE-4020HWEBSCOM Honda Electric Start 20 HP GX620 Comet HWS5040S 4,000 5.3 290 lbs 59 PE-4020HWEBSGEN Honda Electric Start 20 HP GX620 General TS2021 3,500 5.6 290 lbs 60 PE-5024HWEBSCOM Honda Electric Start 24 HP GX670 Comet TW5050 5,000 5.0 290 lbs 61 PE-5024HWEBSGEN MODEL SHOWN Honda Electric Start 24 HP GX670 General T5050 5,000 5.0 290 lbs 62 PE-3024HWEBSCOM Honda Electric Start 24 HP GX670 Comet TW8030 3,000 8.0 290 lbs. 63 PE-2524HWEBSCOM Honda Electric Start 24 HP GX670 Comet TW10025 2,500 10.0 290 lbs. *Battery may not be able to ship with all carriers. ** Batteries must be charged. Additional Features 19,600-25,000 Cleaning units 36 Insulated Lance 36 Insulated Lance Thermal Relief Valve Protects the Quick Connect nozzles in 0, 15, 40, Comes wrapped & strapped on a pallet Pump from Overheating and soap nozzle Safety Relief Valve Industrial 5,000 PSI Spray Gun

PRESSURE WASHERS up to 24 HP GAS POWERED GEARDRIVE UNITS UP TO 5000 PSI 10.0 GPM 23 STAINLESS STEEL FRAMES GEARDRIVE Powered by an industrial grade 24HP Honda engine with oil alert engine and electric start. LOW OIL ALERT INDUSTRIAL STRENGTH STAINLESS FRAME: Comes with 13 foam-filled tires, aluminum mags, and threaded bolt-on axle. Gearbox-driven industrial triplex pump with oil sight glass, oil drain plug, adjustable unloader, and external bypass hose. Die cast aluminum alloy crank case for protection again corrosion. Piston guides are heat treated stainless steel. Stainless steel check valves. Single piece, solid bronze alloy connecting rods. *Unit does not come with a gas tank! Part# Optional Kits 31103 3 Gallon Gas Tank 31109 9 Gallon Gas Tank Available Truck Mount Version Mount any 20 or 24HP pressure washer to a truck or trailer. Call for details. # Model# Engine Pump PSI GPM 64 PE-5024HWEGSCOM MODEL SHOWN Honda Electric Start 24 HP GX670 Comet TW5050S 5,000 5.0 250 lbs 65 PE-5024HWEGSGEN Honda Electric Start 24 HP GX670 General TSP1819 5,000 5.0 250 lbs 66 PE-3024HWEGSCOM Honda Electric Start 24 HP GX670 Comet TW8030 3,000 8.0 250 lbs. 67 PE-2524HWEGSCOM Honda Electric Start 24 HP GX670 Comet TW10025 2,500 10.0 250 lbs. **Available in truck mount version. Call for details. ***Battery may not be able to ship with all carriers. Pic Feature Pic Feature Pic Feature 21,000-25,000 Cleaning units Chemical Injector 36 Insulated Lance Thermal Relief Valve Protects the Quick Connect nozzles in 0, 15, 40, 50 Steel Braided Hose Pump from Overheating and soap nozzle Safety Relief Valve Industrial 5,000 PSI Spray Gun Comes wrapped & strapped on a pallet Comet TW5050S 85.149.059GB Comet TW8030 85.149.062GB Comet TW10025 85.149.064GB General TSP1819 Call for Part #.

24 PRESSURE WASHERS 1.5 HP ELECTRIC POWERED UNITS 1100 PSI 2.0 GPM BLACK POWDER COATED FRAME Powered by a reliable 1.5 HP Baldor Electric Motor. Commercial axial or triplex pump with oil sight glass, oil drain plug, and adjustable unloader. CSA APPROVED UNITS INCLUDE A GFCI (GROUND FAULT CIRCUIT INTERRUPTER) 23 FT. 12 GAUGE CORD C US 189790 Some models come CSA Approved # Model# Approval Engine Amps Pump PSI GPM 68 PE-1115EW1COM MODEL SHOWN CSA Approved 1.5 HP (1 phase) 110V 13.7 Comet LWD-K2020E 1,100 2.0 95 lbs 69 PE-1115EW1COMX CSA Approved 1.5 HP (1 phase) 110V 13.7 Comet AXD2020E 1,100 2.0 95 lbs 70 PE-1115EW1CAT CSA Approved 1.5 HP (1 phase) 110V 13.7 Cat2DX20E 1,100 2.0 95 lbs 71 PE-1115EW1COME 1.5 HP (1 phase) 110V 13.7 Comet LWD-K2020E 1,100 2.0 95 lbs 72 PE-1115EW1COMXE 1.5 HP (1 phase) 110V 13.7 Comet AXD2020E 1,100 2.0 95 lbs Additional Features 2,200 Cleaning Units 10 tubed pneumatic tires Industrial 5,000 PSI spray gun Powder coated steel frame with Quick Connect nozzles in 0, 15, 40, Switch, Cord & Plug Included anti-vibration rubber foot and soap nozzle 25 steel wire braided hose Anti-Vibration Rubber Foot Comet AXD2020E 85.149.028B Comet LWD-K2020E 85.149.021B Cat 2DX20E 85.119.019B 19 221 2 21

PRESSURE WASHERS 2.0 HP ELECTRIC POWERED UNITS 1500 PSI 2.0 GPM 25 BLACK POWDER COATED FRAME Powered by a reliable 2.0 HP Baldor Electric Motor. Commercial axial or triplex pump with oil sight glass, oil drain plug, and adjustable unloader. CSA APPROVED UNITS INCLUDE A GFCI (GROUND FAULT CIRCUIT INTERRUPTER) 23 FT. 12 GAUGE CORD C US 189790 Some models come CSA Approved # Model# Approval Engine Amps Pump PSI GPM 73 PE-1520EW1COM CSA Approved 2.0 HP (1 phase) 110V 17.3 Comet LWD-K2020E 1,500 2.0 100 lbs 74 PE-1520EW1COMX MODEL SHOWN CSA Approved 2.0 HP (1 phase) 110V 17.3 Comet AXD2020E 1,500 2.0 100 lbs 75 PE-1520EW1CAT CSA Approved 2.0 HP (1 phase) 110V 17.3 Cat2DX20E 1,500 2.0 100 lbs 76 PE-1520EW1COME 2.0 HP (1 phase) 110V 17.3 Comet LWD-K2020E 1,500 2.0 100 lbs 77 PE-1520EW1COMXE 2.0 HP (1 phase) 110V 17.3 Comet AXD2020E 1,500 2.0 100 lbs Additional Features 3,000 Cleaning Units 10 tubed pneumatic tires Industrial 5,000 PSI spray gun Powder coated steel frame with Quick Connect nozzles in 0, 15, 40, Switch, Cord & Plug Included anti-vibration rubber foot and soap nozzle 25 steel wire braided hose Anti-Vibration Rubber Foot Comet AXD2020E 85.149.028B Comet LWD-K2020E 85.149.021B Cat 2DX20E 85.119.019B 19 221 2 21

26 PRESSURE WASHERS UPTO 10HP ELECTRIC POWERED UNITS UP TO 3000 PSI UP TO 4.0 GPM BLACK & RED POWDER COATED FRAME Powered by a reliable Baldor Electric Motor. Industrial triplex pump with oil sight glass, oil drain plug, and EZ Start adjustable unloader. DOES NOT INCLUDE SWITCH, CORD & PLUG (EXCEPT PE-2030EW1COM) Redesigned powder coated steel frame has 3 lbs more bulk. Comes with antivibration rubber foot. # Model# Engine Pump PSI GPM 78 PE-2030EW1COM* 3.0 HP (1 phase) 220V Comet LWD-K2020E 2,000 2.2 135 lbs 79 PE-2050EW1COM 5.0 HP (1 phase) 220V Comet FWS3530E 2,000 3.5 200 lbs 80 PE-2050EW3COM 5.0 HP (3 phase) 575V Comet FWS3530E 2,000 3.5 200 lbs 81 PE-2775EW1COM MODEL SHOWN 7.5 HP (1 phase) 220V Comet FWS3530E 2,700 3.5 230 lbs 82 PE-2775EW3COM 7.5 HP (3 phase) 575V Comet FWS3530E 2,700 3.5 230 lbs 83 PE-3010EW3COM 10 HP (3 phase) 575V Comet FWS4030E 3,000 4.0 230 lbs 84 PE-2050EW3COM4 5.0 HP (3 phase) 230/460V Comet FWS3530E 2,000 3.5 200 lbs 85 PE-2775EW3COM4 7.5 HP (3 phase) 230/460V Comet FWS3530E 2,700 3.5 230 lbs 86 PE-3010EW3COM4 10 HP (3 phase) 230/460V Comet FWS4030E 3,000 4.0 230 lbs Additional Features 4,400-12,000 Cleaning Units Low Pressure Chemical Injector * Does not include Cord, Switch or Plug Industrial 5,000 PSI spray gun 50 steel wire braided hose (except PE-2030EW1COM) Quick Connect nozzles in 0, 15, 40, 13 Tubed Pneumatic Tires and soap nozzle Comet LWD-K2020E 85.149.021B Comet FWS4030E 85.149.008B Comet FWS3530E 85.149.017B 25 31 24

PRESSURE WASHERS 2.0 HP ELECTRIC POWERED UNITS 1500 PSI 2.0 GPM 27 RED POWDER COATED FRAME Example of Pack-A-Round mounted to a wall. Powered by a reliable 2.0 HP Baldor Electric Motor. Industrial triplex pump with oil sight glass, oil drain plug, and adjustable unloader. AUTO ON/OFF FEATURE Unit starts automatically when trigger is pulled, and shuts down automatically when trigger is released. # Model# Engine Pump PSI GPM 87 PE-1520EP1COMH MODEL SHOWN 2.0 HP (1 phase) 110V Comet LWD-K2020E 1,500 2.0 80 lbs Additional Features 3,000 Cleaning Units Auto Switch Box Low Pressure Chemical Injector 25 steel wire braided hose 36 Insulated Lance Quick Connect nozzles in 0, 15, 40, Industrial 5,000 PSI spray gun and soap nozzle Comet LWD-K2020E 85.149.021B 241 2 32 25

28 PRESSURE WASHERS 540 RPM 4000 PSI PTO DRIVEN DIRECT DRIVE 3.5 GPM PTO MOUNTED STEEL FRAME A B C Distinguishing Features Mounts to any Category 1 hitch PTO Shaft is Included Industrial Black Powder Coated Frame # Model# PTO RPM Hitch Pump PSI GPM 88 PE-40PTOCOM MODEL SHOWN 540 CAT 1 Comet HW3540S 4,000 3.5 120 lbs Pic Feature Pic Feature Pic Feature 14,000 Cleaning Units 2 Chemical Injector PTO Shaft Included PTO Driven 3 50 Steel Braided Non Marking Hose 540 6 Spline PTO Included 1 Adjustable Unloader 4 5,000 PSI Spray Gun Black Powder Coated Frame Thermal Relief Valve (145 ) 5 36 Insulated Lance Comes with Industrial Triplex Pump Safety Relief Valve 6 4 Quick-Connect Spray Tips (Part # 85.149.031AB) PTO INCLUDED 1 2 3 4 5 6

PRESSURE WASHERS 29 PTO DRIVEN CLEANING DRIVEN BY THE PTO ON YOUR TRACTOR OR CAT

30 GENERATORS 5 HP BLACK POWDER COATED FRAME 2600 WATTS 120 VOLT PACKAGING: Boxed PREMIUM GENERATOR SERIES GENERATOR 5 HP Optional wheel kit part# 85.400. 037 Model# BE-2600WT Engine 5 HP Honda GC160 Max Output 2600 Watts Continuous Output 2100 Watts Approx. Run Time 15 Hours at 50% Load Voltage 120V Receptacles 4 x 120 volt Breakers 2-10 Amps Tank Capacity 14 L (3.75 Gal) 81 lbs Box Dimensions L24 x W18 x H18 189790 A B C Distinguishing Features Brushless Generator Head 4 x 120V Receptacles Long-Lasting 14L (3.75 Gal) Gas Tank LONG-LASTING 14L (3.75 GAL) GAS TANK GENERATOR 5 HP Optional wheel kit part# 85.400.029 Model# BE-2600W Engine 5 HP Honda GC160 Max Output 2600 Watts Continuous Output 2100 Watts Approx. Run Time 3.5 Hours at 50% Load Max Load 21 Amps Max Continuous Load 17 Amps Voltage 120V Receptacles 4 x 120 volt Breakers 2-10 Amps Tank Capacity 1.72L 1.82 Quart 80 lbs Box Dimensions L24 x W18 x H18

GENERATORS up to 9 HP BLACK POWDER COATED FRAME UP TO 4800 WATTS UP TO 240 VOLT 31 PACKAGING: Boxed INDUSTRIAL GENERATOR SERIES GENERATOR 5.5 HP Optional wheel kit part# 85.400.029 Model# BE-2900W Engine 5.5 HP Honda GX160, Oil Alert Max Output 2,900 Watts, 24.1 Amps Continuous Output 2,400 Watts, 20 Amps Approx. Run Time 4.1 Hours at 1/2 Load Voltage 120V Receptacles 2 x 120V Duplex Breakers 2-15 Amps Tank Capacity 3.88 Litres 85 lbs Box Dimensions L24 x W18 x H18 GENERATOR 6.5 HP GENERATOR 9 HP Optional wheel kit part# 85.400.029 Optional wheel kit part# 85.400.034 BE-4800W BE-4800W4 Model# BE-3100W Engine 6.5 HP Honda GX200, Oil Alert Max Output 3100 Watts, 25.8 Amps Continuous Output 2800 Watts, 23.3 Amps Approx. Run Time 4 Hours at 1/2 Load Voltage 120V/240V Receptacles 120V Duplex & 240V Twistlock Breakers 2-15 Amps Tank Capacity 3.88 Litres 91 lbs Box Dimensions L24 x W18 x H18 Model# BE-4800W BE-4800W4 Receptacles 120V Duplex &120 Twistlock 120V Duplex &240 Twistlock Voltage 120V 120/ 240V Specifications Engine 9 HP Honda GX270, Oil Alert Max Output 4800 Watts, 40 Amps Continuous Output 4500 Watts, 37.5 Amps Approx. Run Time 4.1 Hours at 1/2 Load Breaker 1-20A, 1-30A, & 1-40A Tank Capacity 6.4 Litres 132 lbs Box Dimensions L31 x W24 x H25

32 WATER PUMPS GENERAL PURPOSE WATER PUMPS PACKAGING: Boxed GENERAL PURPOSE WATER PUMP 1 GENERAL PURPOSE WATER PUMP 2 Model# WP-1015HM Size 1 Engine 1.5 HP Honda GX25 4 Stroke Pump Centrifugal Aluminum Max Flow 34 GPM Total Head 96 Ft / 38 PSI Max Suction Head 25 Ft / 10 PSI Impeller Aluminum Solids No Solids (dry) 14.3 lbs. Model# WP-2040HM Size 2 Engine 4.0 HP Honda GX120 Oil Alert Pump Centrifugal Aluminum Max Flow 150 GPM Total Head 105 Ft / 42 PSI Max Suction Head 26 Ft / 10 PSI Impeller Cast Iron Solids No Solids (dry) 55 lbs. GENERAL PURPOSE WATER PUMP 2 GENERAL PURPOSE WATER PUMP 3 Model# WP-2050HM Size 2 Engine 5.0 HP Honda GC160 Pump Centrifugal Aluminum Max Flow 150 GPM Total Head 105 Ft / 40 PSI Max Suction Head 26 Ft / 10 PSI Impeller Cast Iron Solids No Solids (dry) 55 lbs. Model# WP-3050HM Size 3 Engine 5.5 HP Honda GX160 Oil Alert Pump Centrifugal Aluminum Max Flow 265 GPM Total Head 105 Ft / 40 PSI Max Suction Head 26 Ft / 10 PSI Impeller Cast Iron Solids No Solids (dry) 65 lbs.

WATER PUMPS 33 GENERAL PURPOSE & TRASH PUMPS PACKAGING: Boxed GENERAL PURPOSE WATER PUMP 4 TRASH PUMP 3 Model# WP-4080HM Size 4 Engine 8.0 HP GX Honda Oil Alert Pump Centrifugal Aluminum Max Flow 528 GPM Total Head 102 Ft / 40 PSI Max Suction Head 26 Ft / 10 PSI Impeller Cast Iron Solids No Solids (dry) 87 lbs. Model# TP-3080HM Size 3 Engine 8.0 HP GX Honda Oil Alert Pump Centrifugal Aluminum Max Flow 286 GPM Total Head 98 Ft / 38 PSI Max Suction Head 26 Ft / 10 PSI Impeller Cast Iron Solids Up to 1 Dia (dry) 130 lbs. TRASH PUMP 4 HEAD DIAGRAM FOR ALL PUMPS The following is a diagram to show how to set up a water pump or trash pump in relation to the water level, suction hose and discharge hose. Total pump head refers to the amount of lift (suction head) and push (discharge head) a pump is capable of. For best performance, place the pump as near to the water source as possible. This produces the greatest output with the least priming time. Since discharge head capability is always greater than suction head capability, it is important that suction head always be the shorter part of the total head. The following chart shows the water pump and trash pump capabilities. Operation Tip: If the unit does not pump water right away, continue to add water through the priming plug until it is full. Model# TP-4011HM Size 4 Engine 11.0 HP GX Honda Oil Alert Pump Centrifugal Aluminum Max Flow 506 GPM Total Head 95 Ft / 38 PSI Max Suction Head 26 Ft / 10 PSI Impeller Cast Iron Solids Up to 1 Dia (dry) 149 lbs. Discharge Head Suction Head Total Head

34 WATER PUMPS HIGH PRESSURE TRANSFER PUMPS & SLUDGE PUMP KIT PACKAGING: Boxed HIGH PRESSURE TRANSFER PUMP New high pressure system operates at 65 PSI, great for fire fighting and lawn sprinkling. NYLON TRANSFER PUMP 2 This transfer pump is ideal for tank filling, floodwater removal, and lawn and garden watering. The nylon transfer pump can be used for transferring fluids and chemicals or in corrosive environments. Model# HP-2055HM Size 2 Engine 5.5 HP Honda GX160 Oil Alert Pump Centrifugal Aluminum Max Flow 130 GPM Total Head 165 Ft / 65 PSI Max Suction Head 26 Ft / 10 PSI Impeller Cast Iron Solids No Solids (dry) 65 lbs. Model# NP-2055HM Size 2 Engine Honda 5.5 HP Engine Oil Alert Max Flow 200 GPM Total Head 82 Ft Max Suction Head 26 Ft Impeller Nylon (dry) 52.5 lbs SLUDGE PUMP KIT A sludge pump kit easily converts a pressure washer into a light duty water pump. The kit comes with a sludge pump, 25 ft discharge hose, 18 suction hose, and hose clamps. It quickly connects to a standard 1/4 coupler. Convert Your Pressure Washer into a Powerful Sludge Pump Attach to a pressure washer quick connect lance. Part# Size 85.400.018 2 12 lbs

WATER PUMP HOSE ACCESSORIES 35 DISCHARGE HOSE KITS & SUCTION HOSE DISCHARGE HOSE KITS Temperature Rating: 150 F INDUSTRIAL DISCHARGE HOSE KITS Temperature Rating: 150 F Part# Length Size Pressure 85.400.084 50 ft. 1 80 PSI 21.0 lbs 85.400.085 50 ft. 2 80 PSI 22.0 lbs 85.400.086 50 ft. 3 65 PSI 23.0 lbs 85.400.087 50 ft. 4 55 PSI 24.0 lbs Part# Length Size Pressure 85.400.097 50 ft. 2 150 PSI 23.0 lbs 85.400.098 50 ft. 3 150 PSI 24.0 lbs SUCTION HOSE KITS Part# Length Size 85.400.088 25 ft. 1 5 lbs 85.400.089 25 ft. 2 12 lbs 85.400.090 25 ft. 3 16 lbs 85.400.091 25 ft. 4 20 lbs

36 WATER PUMP HOSE ACCESSORIES ALUMINUM CAMLOCK FITTINGS TYPE A CAMLOCK TYPE B CAMLOCK Part# Size Thread Material 90.390.034 3 4 Male coupler X FPT Aluminum 90.390.100 1 Male coupler X FPT Aluminum 90.390.114 1 1 4 Male coupler X FPT Aluminum 90.390.112 1 1 2 Male coupler X FPT Aluminum 90.390.200 2 Male coupler X FPT Aluminum 90.390.300 3 Male coupler X FPT Aluminum Part# Size Thread Material 90.391.034 3 4 Female coupler X MPT Aluminum 90.391.100 1 Female coupler X MPT Aluminum 90.391.114 1 1 4 Female coupler X MPT Aluminum 90.391.112 1 1 2 Female coupler X MPT Aluminum 90.391.200 2 Female coupler X MPT Aluminum 90.391.300 3 Female coupler X MPT Aluminum TYPE C CAMLOCK TYPE D CAMLOCK Part# Size Thread Material 90.392.034 3 4 Male barb x female coupler Aluminum 90.392.100 1 Male barb x female coupler Aluminum 90.392.114 1 1 4 Male barb x female coupler Aluminum 90.392.112 1 1 2 Male barb x female coupler Aluminum 90.392.200 2 Male barb x female coupler Aluminum 90.392.300 3 Male barb x female coupler Aluminum Part# Size Thread Material 90.393.034 3 4 Female coupler X FPT Aluminum 90.393.100 1 Female coupler X FPT Aluminum 90.393.114 1 1 4 Female coupler X FPT Aluminum 90.393.112 1 1 2 Female coupler X FPT Aluminum 90.393.200 2 Female coupler X FPT Aluminum 90.393.300 3 Female coupler X FPT Aluminum

WATER PUMP HOSE ACCESSORIES 37 ALUMINUM CAMLOCK FITTINGS TYPE E CAMLOCK TYPE F CAMLOCK Part# Size Thread Material 90.394.034 3 4 Male barb x male coupler Aluminum 90.394.100 1 Male barb x male coupler Aluminum 90.394.114 1 1 4 Male barb x male coupler Aluminum 90.394.112 1 1 2 Male barb x male coupler Aluminum 90.394.200 2 Male barb x male coupler Aluminum 90.394.300 3 Male barb x male coupler Aluminum Part# Size Thread Material 90.395.034 3 4 Male coupler X MPT Aluminum 90.395.100 1 Male coupler X MPT Aluminum 90.395.114 1 1 4 Male coupler X MPT Aluminum 90.395.112 1 1 2 Male coupler X MPT Aluminum 90.395.200 2 Male coupler X MPT Aluminum 90.395.300 3 Male coupler X MPT Aluminum TYPE DC CAMLOCK TYPE DP CAMLOCK Part# Size Thread Material 90.396.034 3 4 Dust Cap Aluminum 90.396.100 1 Dust Cap Aluminum 90.396.114 1 1 4 Dust Cap Aluminum 90.396.112 1 1 2 Dust Cap Aluminum 90.396.200 2 Dust Cap Aluminum 90.396.300 3 Dust Cap Aluminum Part# Size Thread Material 90.397.034 3 4 Dust Plug Aluminum 90.397.100 1 Dust Plug Aluminum 90.397.114 1 1 4 Dust Plug Aluminum 90.397.112 1 1 2 Dust Plug Aluminum 90.397.200 2 Dust Plug Aluminum 90.397.300 3 Dust Plug Aluminum

38 WATER PUMP HOSE ACCESSORIES POLYPRO CAMLOCK FITTINGS TYPE A CAMLOCK TYPE B CAMLOCK Part# Size Thread Material 90.720.034 3 4 Male coupler X FPT Polypropylene 90.720.100 1 Male coupler X FPT Polypropylene 90.720.114 1 1 4 Male coupler X FPT Polypropylene 90.720.112 1 1 2 Male coupler X FPT Polypropylene 90.737.040 2 Male coupler X FPT Polypropylene 90.720.300 3 Male coupler X FPT Polypropylene Part# Size Thread Material 90.721.034 3 4 Female coupler X MPT Polypropylene 90.721.100 1 Female coupler X MPT Polypropylene 90.721.114 1 1 4 Female coupler X MPT Polypropylene 90.721.112 1 1 2 Female coupler X MPT Polypropylene 90.737.300 2 Female coupler X MPT Polypropylene 90.721.300 3 Female coupler X MPT Polypropylene TYPE C CAMLOCK TYPE D CAMLOCK Part# Size Thread Material 90.722.034 3 4 Male barb x female coupler Polypro 90.722.100 1 Male barb x female coupler Polypro 90.722.114 1 1 4 Male barb x female coupler Polypro 90.722.112 1 1 2 Male barb x female coupler Polypro 90.737.360 2 Male barb x female coupler Polypro 90.722.300 3 Male barb x female coupler Polypro Part# Size Thread Material 90.723.034 3 4 Female coupler X FPT Polypropylene 90.723.100 1 Female coupler X FPT Polypropylene 90.723.114 1 1 4 Female coupler X FPT Polypropylene 90.723.112 1 1 2 Female coupler X FPT Polypropylene 90.737.240 2 Female coupler X FPT Polypropylene 90.723.300 3 Female coupler X FPT Polypropylene

WATER PUMP HOSE ACCESSORIES 39 POLYPRO CAMLOCK FITTINGS TYPE E CAMLOCK TYPE F CAMLOCK Part# Size Thread Material 90.724.034 3 4 Male barb x male coupler Polypro 90.724.100 1 Male barb x male coupler Polypro 90.724.114 1 1 4 Male barb x male coupler Polypro 90.724.112 1 1 2 Male barb x male coupler Polypro 90.737.160 2 Male barb x male coupler Polypro 90.724.300 3 Male barb x male coupler Polypro Part# Size Thread Material 90.725.034 3 4 Male coupler X MPT Polypropylene 90.725.100 1 Male coupler X MPT Polypropylene 90.725.114 1 1 4 Male coupler X MPT Polypropylene 90.725.112 1 1 2 Male coupler X MPT Polypropylene 90.737.100 2 Male coupler X MPT Polypropylene 90.725.300 3 Male coupler X MPT Polypropylene TYPE DC CAMLOCK TYPE DP CAMLOCK Part# Size Thread Material 90.726.034 3 4 Dust Cap Polypropylene 90.726.100 1 Dust Cap Polypropylene 90.726.114 1 1 4 Dust Cap Polypropylene 90.726.112 1 1 2 Dust Cap Polypropylene 90.737.440 2 Dust Cap Polypropylene 90.726.300 3 Dust Cap Polypropylene Part# Size Thread Material 90.727.034 3 4 Dust Plug Polypropylene 90.727.100 1 Dust Plug Polypropylene 90.727.114 1 1 4 Dust Plug Polypropylene 90.727.112 1 1 2 Dust Plug Polypropylene 90.737.500 2 Dust Plug Polypropylene 90.727.300 3 Dust Plug Polypropylene

40 HYDROSTATIC TESTERS 5.5 HP GAS POWERED DIRECT DRIVE 580 PSI 9.3 GPM STAINLESS STEEL 4 WHEEL FRAME A hydrostatic test unit allows the user to test line pressure on a system up to 580 PSI. The user is able to pump water into a closed pipeline system, set and lock the pressure, and test to see if there are any leaks in the pipeline system. Ideal for contractors or rental yards. This Hydrostatic unit provides easy use with a front facing control panel. A B Pic A B C Distinguishing Features Stainless steel frame and easy to use control panel Exclusive water gauge design [10 Gal tank] High capacity water filter C HYDROSTATIC TESTING KIT Can be used to convert any pressure washer into a hydrostatic line test unit. Model# 85.400.004 1,000 PSI Max Temperature 140 F Size 3 4 GHT Outlet Size 3/8 QC 5 lbs. # Model# Engine Pump PSI GPM Diaphragms 89 HS-0655HWHY MODEL SHOWN 5.5 HP Honda GX160 (Oil Alert) AR30 580 9.3 2 210 lbs Pic Feature Pic Feature Pic Feature Honda 5.5 HP GX160 Gas Engine 3 AR Diaphragm Pump 5 Easy Read Control Panel 1 13 Tubed Pneumatic Tires 4 Stainless Steel 10 Gallon Water Reservoir Tank 2 5 Oversize Water Filter 1 2 3 4 5

HYDROSTATIC TESTERS 5.5 HP GAS POWERED DIRECT DRIVE 580 PSI 6.6 GPM 41 STAINLESS STEEL 2 WHEEL FRAME A hydrostatic test unit allows the user to test line pressure on a system up to 580 PSI. The user is able to pump water into a closed pipeline system, set and lock the pressure, and test to see if there are any leaks in the pipeline system. Ideal for contractors or rental yards. This hydrostatic unit is compact and provides easy portability. A B C D Pic Distinguishing Features A Safety Relief Valve B 1 Way Check Valve for Line Pressure C Pressure Regulator D 5 Oversized Water Filter Removable Tank # Model# Engine Pump PSI GPM Diaphragms 90 HS-0650HWHY MODEL SHOWN Honda 5.5 HP GX160 (Oil Alert) Comet APS31 580 6.6 3 190 lbs Pic Feature Pic Feature Pic Feature Honda 5.5 HP GX160 Gas Engine 2 5 Oversize Water Filter 4 Stainless Steel 15 Gallon Water 1 13 Tubed Pneumatic Tires 3 Comet Diaphragm Pump Reservoir Tank 1 2 3 4

42 HOT WATER UNITS 110V UP TO 4,000 PSI HOT WATER TOWERS UP TO 5.6 GPM HOT WATER TOWERS, SKID AND TIRE MOUNTED HOT WATER TOWERS (TIRE MOUNT DIESEL) Call for custom hot washer designs. HOT WATER TOWERS (TIRE MOUNT DIESEL) Call for custom hot washer designs. Model# HT-2003D 2,000 PSI Max Flow 3 GPM Voltage 110V AC, 15A Switch Flow Fuel Nozzle 1.50-1.65 340 lbs HOT WATER TOWERS (TIRE MOUNT DIESEL) For 9.0-13 HP (18A Charger) Honda Engine. Call for custom hot washer designs. The hot water towers above can be connected to an existing pressure washer. For a complete hot water unit please call. Model# HT-3004D 3,000 PSI Max Flow 4 GPM Voltage 110V AC, 15A Switch Flow Fuel Nozzle 2.0 390 lbs Model# 85.380.001L 3,500-4,000 PSI Max Flow 4.0 GPM Voltage 12V DC Switch Pressure Fuel Nozzle 2.0 390 lbs HOT WATER TOWERS (SKID MOUNT DIESEL) Units do not come with pump, engine, or battery. Call for a custom quotation. Specifications may vary with elevation and inlet water temperature (average water temperature is 50 F). Units that will be started and stopped frequently should use a pull start engine instead of an electric start engine. Use 9.0-25.0 HP (18A charger) Honda engines. Model# 85.380.003 4,000 PSI Max Flow 4.6-5.6 GPM Voltage 12V DC Switch Pressure Fuel Nozzle 2.50-2.75 425 lbs

AIR STORAGE TANKS 43 AIR COMPRESSORS 5 GALLON AIR STORAGE TANK 8 GALLON AIR STORAGE TANK Model# 67.000.500 Capacity 5 Gallons 145 PSI Additional Info Comes with gauge, 32 air hose, 1 4 NPT nut, & brass shut-off valve. Model# 67.000.800 Capacity 8 Gallons 145 PSI Additional Info Comes with gauge, 32 air hose, 1 4 NPT nut, & brass shut-off valve.

SECTION 2 SPECIALTY CLEANING UNITS WATER BROOMS Large Water Broom 46 Small Water Broom 46 45 FLAT SURFACE CLEANERS POLYPROPYLENE 12 Multi-Use Whirl-A-Way 48 16 Whirl-A-Way 49 18 Whirl-A-Way 50 20 Whirl-A-Way 51 ABS & NYLON WITH QUICK CASTOR 22 Whirl-A-Way 52 STAINLESS STEEL 20 Whirl-A-Way 53 24 Whirl-A-Way 54 TELESCOPING WANDS Fiberglass 60 Aluminum 62 Telescoping Wand Accessories 63 DRIVEWAY, BEFORE DRIVEWAY, AFTER

46 WATERBROOMS PACKAGING: Packaged The following comparison chart shows the time taken to clean a typical size driveway (400 sq. ft.) using a water broom or a standard spray nozzle. Unit Water Broom Spray Nozzle Time to clean 30 Minutes 80 Minutes WATER BROOM, SMALL Used for cleaning vast surfaces quickly. Comes in a bubble pack ready for display. WATER BROOM, LARGE Used for cleaning vast surfaces quickly. Comes boxed and ready for display. Part# 85.400.060 4,000 PSI Max Flow 3 GPM Width 12 Connection 1/4 Quick-Disconnect plug Nozzles 3 Replacement Nozzles 85.265.013 3.5 lbs Part# 85.400.061 4,000 PSI Max Flow 4 GPM Width 16 Connection 1/4 Quick-Disconnect plug Nozzles 4 Replacement Nozzles 85.265.013 4.5 lbs

FLAT SURFACE CLEANERS 47 Semi-Professional, Commercial, & Industrial Use WHIRL-A-WAYS SEMI-PROFESSIONAL WHIRL-A-WAY S 12 INCH WHIRL-A-WAY 16 INCH WHIRL-A-WAY The Multi-Use Whirl-A-Way is a versatile cleaner and can be used for a variety of cleaning applications. Use with an optional spray gun kit Attach to a longwand Attach to a spray lance FOR MORE INFO SEE PAGE 48 Two rotary cleaning arms Hover action ideal for cleaning rooftops and rough surfaces Easy to handle frame is designed for less operator fatigue Helps eliminate zebra striping FOR MORE INFO SEE PAGE 49 COMMERCIAL USE WHIRL-A-WAY S 18 INCH WHIRL-A-WAY Two rotary cleaning arms Comes with castors ideal for cleaning driveways and other large flat surfaces Easy to handle frame is designed for less operator fatigue Helps eliminate zebra striping FOR MORE INFO SEE PAGE 50 20 INCH WHIRL-A-WAY Two rotary cleaning arms Hover action ideal for cleaning rooftops and rough surfaces Easy to handle frame is designed for less operator fatigue Helps eliminate zebra striping FOR MORE INFO SEE PAGE 51 INDUSTRIAL USE WHIRL-A-WAY S 22 INCH WHIRL-A-WAY Two rotary cleaning arms Comes with removable castors for increased versatility Works well for cleaning large flat surfaces as well as rough surfaces Easy to handle frame is designed for less operator fatigue Helps eliminate zebra striping FOR MORE INFO SEE PAGE 52 20 & 24 INCH WHIRL-A-WAY Three rotary cleaning arms Comes with castors ideal for cleaning driveways and other large flat surfaces Stainless Steel design for maximum cleaning durability Easy to handle frame is designed for less operator fatigue Helps eliminate zebra striping FOR MORE INFO SEE PAGES 53 & 54

48 FLAT SURFACE CLEANERS 12 HEAVY DUTY COMPOSITE 4000 PSI MAX UP TO 8.0 GPM 12 MULTI-USE WHIRL-A-WAY SEMI-PROFESSIONAL WHIRL-A-WAY S The following comparison chart shows the time taken to clean a typical size driveway (400 sq. ft.) using 3 different components. Unit Whirl-A-Way Water Broom Spray Nozzle Time to clean 10 Minutes 30 Minutes 80 Minutes Attach to a longwand and clean hard to reach surfaces. Attach to a gun and lance for cleaning flat surfaces. Use an high pressure spray gun kit to clean walls.* 4,000 PSI Rotary Head 180 F Durable Nylon Brush Skirt & Heavy Duty Polypropylene Cover. Welded Steel Two Arm Rotary Bar. Part# Optional Kits 85.400.066 Spray Gun Kit Kit complete with spray gun and handle. # Model# Max Flow Max Temp. Size 91 BE-1200WAW MODEL SHOWN 4,000 PSI 8.0 GPM 180 F 12 5.6 lbs Additional Features Zero Wall Clearance * Gun kit sold separately. 71 2 131 2 131 2

FLAT SURFACE CLEANERS 16 HEAVY DUTY COMPOSITE 4000 PSI MAX UP TO 8.0 GPM 49 16 WHIRL-A-WAY, HEAVY DUTY COMPOSITE SEMI-PROFESSIONAL WHIRL-A-WAY S UP TO 180 F HOT COLD Hover action is ideal for rooftop cleaning applications. Easy to handle frame is designed for less operator fatigue. The following comparison chart shows the time taken to clean a typical size driveway (400 sq. ft.) using 3 different components. Unit Whirl-A-Way Water Broom Spray Nozzle Time to clean 10 Minutes 30 Minutes 80 Minutes Welded Steel Two Arm Rotary Bar. Heavy Duty Polypropylene Cover SPRAY GUN Welded Elbows and Assembly Durable Nylon Brush Skirt Part# 85.202.017 4,000 PSI Max Temp 180 F Max Flow 8 GPM Outlet 1/4 FNPT 3/8 FNPT 1.3 lbs # Model# Max Flow Max Temp. Size 92 BE-1600WAW 4,000 PSI 8.0 GPM 180 F 16 diameter 26 lbs. MODEL SHOWN Additional Features Zero Wall Clearance Water Flow Out Front Eliminates Water Build Up 13 32 20

50 FLAT SURFACE CLEANERS 18 18 HEAVY DUTY COMPOSITE 4000 PSI MAX UP TO 8.0 GPM 18 WHIRL-A-WAY, HEAVY DUTY COMPOSITE COMMERCIAL USE WHIRL-A-WAY S UP TO 180 F HOT COLD Whirl-A-Ways with castors are ideal for cleaning driveways Easy to handle frame is designed for less operator fatigue The following comparison chart shows the time taken to clean a typical size driveway (400 sq. ft.) using 3 different components. Unit Whirl-A-Way Water Broom Spray Nozzle Time to clean 10 Minutes 30 Minutes 80 Minutes Welded Steel Two Arm Rotary Bar. Heavy Duty Polypropylene Cover SPRAY GUN Welded Elbows and Assembly Greasable Casters 4,000 PSI Rotary Head 180 F Part# 85.202.115 4,000 PSI Max Temp 180 F Max Flow 8 GPM Outlet 1/4 FNPT 3/8 FNPT 1.3 lbs # Model# Max Flow Max Temp. Size 93 BE-1800WAW MODEL SHOWN 4,000 PSI 8.0 GPM 180 F 18 diameter 32 lbs. Additional Features Zero Wall Clearance Water Flow Out Front Eliminates Water Build Up 13 32 21

FLAT SURFACE CLEANERS 20 HEAVY DUTY COMPOSITE 4000 PSI MAX UP TO 8.0 GPM 51 20 WHIRL-A-WAY, HEAVY DUTY COMPOSITE COMMERCIAL USE WHIRL-A-WAY S UP TO 180 F HOT COLD Hover action is ideal for rooftop cleaning applications. Ergonomic frame design for less operator fatigue and more ease-of-use. The following comparison chart shows the time taken to clean a typical size driveway (400 sq. ft.) using 3 different components. Unit Whirl-A-Way Water Broom Spray Nozzle Time to clean 10 Minutes 30 Minutes 80 Minutes Welded Steel Two Arm Rotary Bar. Heavy Duty Polypropylene Cover SPRAY GUN Welded Elbows and Assembly Durable Nylon Brush Skirt Part# 85.202.115 4,000 PSI Max Temp 180 F Max Flow 8 GPM Outlet 1/4 FNPT 3/8 FNPT 1.3 lbs # Model# Max Flow Max Temp. Size 94 BE-2000WAWY MODEL SHOWN 4,000 PSI 8.0 GPM 180 F 20 diameter 32 lbs. Additional Features Zero Wall Clearance Water Flow Out Front Eliminates Water Build Up 13 32 21

PATENTED PRODUCT PATENTED PRODUCT PATENTED PRODUCT PATENTED PRODUCT PATENTED PRODUCT 52 FLAT SURFACE CLEANERS 22 HEAVY DUTY COMPOSITE 4000 PSI MAX UP TO 8.0 GPM 22 WHIRL-A-WAY, HEAVY DUTY COMPOSITE COMMERCIAL USE WHIRL-A-WAY S UP TO 180 F HOT COLD Add the castors for cleaning driveways. Easy removal of castors for cleaning rooftops. Threaded gun allows for quick removal and easy field repair. Tough ABS & Nylon Cover for maximum durability. Welded steel two arm rotary bar with welded elbows and assembly. Easy to handle frame is designed for less operator fatigue The following comparison chart shows the time taken to clean a typical size driveway (400 sq. ft.) using 3 different components. Unit Whirl-A-Way Water Broom Spray Nozzle THREADED SPRAY GUN Replacement spray gun for the BE- 2200WAWG and the Aluminum long wands. Time to clean 10 Minutes 30 Minutes 80 Minutes 4,000 PSI Rotary Head 180 F Patented Non-Marking removable castors designed for maximum cleaning versatility. REPAIR KITS Part# Repair kit 85.201.005 Part# 85.202.116 4,000 PSI Max Temp 180 F Max Flow 10 GPM Outlet 1/4 FNPT 3/8 FNPT 2.12 lbs # Model# Max Flow Max Temp. Size 95 BE-2200WAWG MODEL SHOWN 4,000 PSI 8.0 GPM 180 F 22 diameter 38 lbs. Additional Features Zero Wall Clearance Water Flow Out Front Eliminates Water Build Up 13 32 22

FLAT SURFACE CLEANERS 20 4000 PSI MAX STAINLESS STEEL UP TO 8.0 GPM 53 20 WHIRL-A-WAY, STAINLESS STEEL INDUSTRIAL USE WHIRL-A-WAY S UP TO 180 F HOT COLD Comes with castors ideal for cleaning large flat surfaces Easy to handle frame is designed for less operator fatigue The following comparison chart shows the time taken to clean a typical size driveway (400 sq. ft.) using 3 different components. Unit Whirl-A-Way Water Broom Spray Nozzle Time to clean 10 Minutes 30 Minutes 80 Minutes Welded steel three Arm Rotary bar with a welded elbows and assembly. SPRAY GUN Non-Marking castors 4,000 PSI Rotary Head 180 F Part# 85.202.115 4,000 PSI Max Temp 180 F Max Flow 8 GPM Outlet 1/4 FNPT 3/8 FNPT 1.3 lbs # Model# Max Flow Max Temp. Size 96 BE-2000WAWS MODEL SHOWN 4,000 PSI 8.0 GPM 180 F 20 diameter 38 lbs. Additional Feature Zero Wall Clearance 13 32 22

54 FLAT SURFACE CLEANERS 24 4000 PSI MAX STAINLESS STEEL UP TO 8.0 GPM 24 WHIRL-A-WAY, STAINLESS STEEL INDUSTRIAL USE WHIRL-A-WAY S UP TO 180 F HOT COLD Comes with castors ideal for cleaning large flat surfaces Easy to handle frame is designed for less operator fatigue The following comparison chart shows the time taken to clean a typical size driveway (400 sq. ft.) using 3 different components. Unit Whirl-A-Way Water Broom Spray Nozzle Time to clean 10 Minutes 30 Minutes 80 Minutes Welded steel three arm rotary bar with a welded elbows and assembly. SPRAY GUN Non-Marking castors 4,000 PSI Rotary Head 180 F Part# 85.202.115 4,000 PSI Max Temp 180 F Max Flow 8 GPM Outlet 1/4 FNPT 3/8 FNPT 1.3 lbs # Model# Max Flow Max Temp. Size 97 BE-2400WAWS MODEL SHOWN 4,000 PSI 8.0 GPM 180 F 24 diameter 45 lbs. Additional Feature Zero Wall Clearance 13 32 26

WHIRL-A-WAY ACCESSORIES & REPLACEMENT PARTS 55 BALL VALVE KIT, BE-1200WAW, & BE-1600WAW BREAKDOWNS BALL VALVE KIT Allows you to switch between Whirl-A-Way and Wand without having to shutdown the unit. REPLACEMENT PARTS, BE-1600WAW Part# 85.300.044 4,000 PSI Max Temperature 180 F Outlet 3/8 Quick Connect Plug 3/8 Quick Connect Coupler 2.28 lbs REPLACEMENT PARTS, BE-1200WAW 1 1 # Part# Replacement Part 1 85.790.004 Rotary Head 2 85.791.009 Rotary Arm - 16 2 Arm 85.790.010 Rotary Head Repair Kit 3 85.225.025 Replacement Nozzle Tip - 025 Orifice 4 85.790.012 Nylon Brush Skirt - 16 SPRAY GUN, BE-1600WAW 4 2 3 2 2 3 # Part# Replacement Part 1 85.790.021 Rotary Head 2 85.791.016 Rotary Arm 85.790.022 Rotary Head Repair Kit 3 85.215.020 Replacement Nozzle Tip - 020 Orifice 4 85.790.024 Nylon Brush Skirt - 12 Part# 85.202.017 4,000 PSI Max Temperature 180 F Max Flow 8 GPM Outlet 1/4 FNPT 3/8 FNPT 1.35 lbs

56 WHIRL-A-WAY REPLACEMENT PARTS BE-1800WAW & BE-2000WAWY BREAKDOWNS REPLACEMENT PARTS, BE-1800WAW REPLACEMENT PARTS, BE-2000WAWY 2 3 1 1 2 3 4 4 # Part# Replacement Part 1 85.790.006 Rotary Head 2 85.791.007 Rotary Arm - 2 Arm for 18 85.790.010 Rotary Head Repair Kit 3 85.225.025 Replacement Nozzle Tip - 025 Orifice 4 85.790.007 1 Caster Wheels # Part# Replacement Part 1 85.790.004 Rotary Head 2 85.791.013 Rotary Arm - 2 Arm for 20 85.790.010 Rotary Head Repair Kit 3 85.225.025 Replacement Nozzle Tip - 025 Orifice 4 85.790.014 Nylon Brush Skirt SPRAY GUN, BE-1800WAW & BE-200WAWY WHIRL-A-WAY ROTARY HEAD BREAKDOWN Hose connection inlet Grease nipple (P/N# 85.790.027) Stainless steel spring Viton O-Ring (P/N# 85.790.002) Stainless steel sleeve Stainless steel inlet valve with Carbide seat (P/N# 85.790.001 includes oring) Part# 85.202.115 4,000 PSI Max Temperature 180 F Max Flow 8 GPM Outlet 1/4 FNPT 3/8 FNPT 1.3 lbs Viton O-Ring Stainless steel bearings Aluminum housing Stainless steel rotating shaft

WHIRL-A-WAY REPLACEMENT PARTS 57 BE-2000WAWS & BE-2400WAWS BREAKDOWNS REPLACEMENT PARTS, BE-2000WAWS REPLACEMENT PARTS, BE-2400WAWS 1 5 1 5 2 2 3 4 3 4 # Part# Replacement Part 1 85.790.004 Rotary Head 2 85.791.012 Tri-Rotary Arm - 2 Arm for 20 SS 3 85.790.009 1 Non Marking Caster 4 85.790.014S Nylon Brush Skirt 20 85.790.010 Rotary Head Repair Kit 5 85.225.020 Replacement Nozzle Tip - 020 Orifice # Part# Replacement Part 1 85.790.004 Rotary Head 2 85.791.010S Tri-Rotary Arm 11 R - 24 SS 3 85.790.020 1.5 Non Marking Caster 4 85.790.019S Nylon Brush Skirt - 24 SS WAW 85.790.010 Rotary Head Repair Kit 5 85.225.020 Replacement Nozzle Tip - 020 Orifice SPRAY GUN, BE-2000WAWS & BE-2400WAWS WHIRL-A-WAY ROTARY HEAD BREAKDOWN Hose connection inlet Grease nipple (P/N# 85.790.027) Stainless steel spring Viton O-Ring (P/N# 85.790.002) Stainless steel sleeve Stainless steel inlet valve with Carbide seat (P/N# 85.790.001 includes oring) Part# 85.202.115 4,000 PSI Max Temperature 180 F Max Flow 8 GPM Outlet 1/4 FNPT 3/8 FNPT 1.3 lbs Viton O-Ring Stainless steel bearings Aluminum housing Stainless steel rotating shaft

58 CLEAN HARD TO REACH AREAS WITH A BE TELESCOPING WAND. MAKE YOUR JOB EASIER WITH OPTIONAL ACCESSORIES. Part# BE-1200WAW Description 12 Whirl-A-Way Part# Description 85.210.020 5,100 PSI Rotary Nozzle Part# Description 85.400.019 Belt Kit Part# Description 85.400.008 Rotating Brush Part# Description 85.400.033 Gutter Cleaner Kit

TELESCOPING WAND ACCESSORIES 59 Semi-Professional, Commercial, & Industrial Use TELESCOPING WANDS SEMI-PROFESSIONAL TELESCOPING WANDS 12/18/24 FT TELESCOPING WAND [FIBERGLASS] - PAGE 60 Easily clean rooftops and tough to reach areas with a telescoping wand. Threaded gun for quick removal and easy field repair. Two aluminum inner poles & fiberglass outer pole for maximum strength. Coarse threaded pole lock for a tight grip. M22 screw-type connections to easily and securely add accessories. COMMERCIAL USE TELESCOPING WANDS 24 FT TELESCOPING WAND [SHD FIBERGLASS] - PAGE 61 Easily clean rooftops and tough to reach areas with a telescoping wand. Threaded gun for quick removal and easy field repair. Two fiberglass outer poles and aluminum inner pole for maximum strength. Coarse threaded pole lock for a tight grip. M22 screw-type connections to easily and securely add accessories. Large 3/8 hose for maximum chemical draw. INDUSTRIAL USE TELESCOPING WANDS 24 FT TELESCOPING WAND [HD ALUMINUM] - PAGE 62 Easily clean rooftops and tough to reach areas with a telescoping wand. Threaded gun for quick removal and easy field repair. Three aluminum poles for maximum strength. Pin lock couplers allow you to easily change pole height. M22 screw-type connections to easily and securely add accessories.

60 TELESCOPING WANDS 24FT FIBERGLASS HEAVY DUTY 4000 PSI 8 GPM FIBERGLASS, HEAVY DUTY SEMI-PROFESSIONAL TELESCOPING WANDS Easily clean rooftops with a telescoping wand. Threaded gun for quick removal and easy field repair. Two aluminum poles and fiberglass outer pole for maximum strength. THREADED LONG WAND SPRAY GUN Screw type connection for a solid grip on accessories. REPAIR KITS Part# Repair kit 85.201.005 Coarse threaded pole lock for a tight grip. Part# 85.202.114 4,000 PSI Max Temp 200 F Max Flow 10 GPM Outlet 1/4 FNPT 3/8 FNPT 2.12 lbs Part# Replacement Parts 85.205.104 Small Pole Lock 85.205.105 Large Pole Lock # Model# Max Flow Max Temp. Length Hose 98 85.206.012 4,000 PSI 8 GPM 200 F 6ft. 6 12ft. 1/4 7.5 lbs 99 85.206.018 MODEL SHOWN 4,000 PSI 8 GPM 200 F 6ft. 6 18ft. 1/4 8.5 lbs 100 85.206.024 4,000 PSI 8 GPM 200 F 9ft. 24ft. 1/4 10.5 lbs

TELESCOPING WANDS 24FT FIBERGLASS SUPER HEAVY DUTY 4000 PSI 8.0 GPM 61 FIBERGLASS, SUPER HEAVY DUTY COMMERCIAL USE TELESCOPING WANDS Easily clean rooftops with a telescoping wand. Threaded gun for quick removal and easy field repair. Screw type connection for a solid grip on accessories. Coarse threaded pole lock for a tight grip. LONG WAND SPRAY GUN Two fiberglass outer poles and one aluminum inner pole for maximum strength. Large 3/8 hose for maximum chemical draw. REPAIR KITS Part# Repair kit 85.201.005 Lightweight design includes a belt kit which helps reduce operator fatigue. Part# 85.202.114 4,000 PSI Max Temp 200 F Max Flow 10 GPM Outlet 1/4 FNPT 3/8 FNPT 2.12 lbs Part# Replacement Parts 85.205.104 Small Pole Lock 85.205.105 Large Pole Lock # Model# Max Flow Max Temp. Length Hose 101 85.206.024SHD MODEL SHOWN 4,000 PSI 8 GPM 200 F 9ft. 24ft. 3/8 16 lbs

62 TELESCOPING WANDS up to 24FT ALUMINUM SUPER HEAVY DUTY 4000 PSI 8 GPM ALUMINUM SUPER HEAVY DUTY INDUSTRIAL USE TELESCOPING WANDS Easily clean high walls with a telescoping wand. Threaded gun for quick removal and easy field repair. Two flat sided aluminum poles retract easily and won t spin during operation. LONG WAND SPRAY GUN Screw type connection for a solid grip on accessories. Easy to use pin lock couplers. Lightweight design includes a belt kit which helps reduce operator fatigue. REPAIR KITS Part# Repair kit 85.201.005 Part# 85.202.116 4,000 PSI Max Temp 200 F Max Flow 10 GPM Outlet 1/4 FNPT 3/8 FNPT 2.12 lbs Part# Replacement Parts 85.205.106 Small Pole Lock 85.205.107 Large Pole Lock # Model# Max Flow Max Temp. Length Hose 102 85.205.018ALSHD 4,000 PSI 8 GPM 200 F 6ft. 6 18ft. 1/4 13 lbs 103 85.205.024ALSHD 4,000 PSI 8 GPM 200 F 9ft. 24ft. 1/4 16.5 lbs MODEL SHOWN

TELESCOPING WAND ACCESSORIES 63 GUTTER CLEANERS, BRUSHES, & BELT KIT GUTTER CLEANER Turns wands into efficient gutter cleaners so that gutters can be cleaned from the ground. Connects with a quick connect fitting. GUTTER CLEANER KIT This gutter pole attaches to the new style BE Long Wand. Held firmly in place by an M22 fitting. Part# 85.400.007 4,000 PSI Outlet 1/4 quick connect coupler 1/4 plug 0.55 lbs Part# 85.400.033 4,000 PSI Outlet 1/4 quick connect coupler Male M22 0.60 lbs NYLON BRUSH, ROTATING Attach to telescoping wand to provide low pressure scrubbing action. TELESCOPING WAND, BELT KIT Used to support Long Wands, taking stress off the arms and body. For use with all Long Wands. Fits any size (adjustable). Part# 85.400.008 2,000 PSI Max Temperature 140 F 1/4 quick connect plug 1.15 lbs Part# Telescoping Wands 85.400.019 Fits all BE Long Wands

SECTION 3 MATERIAL HANDLING GOODS 67 MATERIAL HANDLING GOODS Dolleys and Trolleys 68 Hand Carts and Hydraulics 69 Utility and Tool Carts 70 Jacks 71 Trailer Jacks 72

68 DOLLIES AND TROLLIES SMALL TRUCK DOLLY LARGE TRUCK DOLLY APPLIANCE DOLLY Part# 85.600.011 Capacity 600 lbs Wheels 10 Pneumatic Tires Height 52 Frame Red Powder Coated Handle Loop For Easy Use 27 lbs REPLACEMENT PARTS Axle 85.604.011 Tires 85.604.009 HAND TROLLEY Part# 85.600.012 Part# 85.600.014 Capacity 700 lbs Capacity 750 lbs Wheels 14 Pneumatic Tires Wheels 6 Solid Wheels Height 52 Height 601 2 Frame Red Powder Coated Frame Red Powder Coated Handle Loop For Easy Use Treads Crawler For Stairs 31 lbs. Rubber Non Marking Ratchet Secure & Tighten Load REPLACEMENT PARTS 48 lbs Axle 85.604.008 Tires 85.604.010 REPLACEMENT PARTS Stair Climber 85.604.006 Upper Ratchet 85.604.003 Wheel 85.604.002 3-IN-1 HAND TROLLEY Easily converts between truck dolley to an appliance dolley or hand dolley. Part# HT1842 Capacity 550 lbs Wheels 10 Pneumatic Tires Body Size L52 x W22 x H18 Toe Plate Width 7 Frame Red Powder Coated 30 lbs. Part# 85.600.019 Capacity 440 lbs Wheels 10 Pneumatic Tires Body Size L50 xw24 H22 Toe Plate Width 12 Frame Red Powder Coated 46 lbs REPLACEMENT PARTS Castor Wheel 85.604.031 Tires 85.604.030

HAND CARTS AND HYDRAULICS 69 PLATFORM HAND TRUCK PLATFORM HAND TRUCK MOVING CART Part# PH150 Capacity 150 Kgs Wheels 4 casters Body Size L28 x W18 20 lbs Part# PH300 Capacity 300 Kgs Wheels 5 casters Body Size L35 x 24 W 37 lbs Part# Capacity Wheels Body Size D1000 600 lbs 3 casters L30 x W18 x H5.5 12 lbs PALLET JACK HYDRAULIC LIFT The pallet jack forks can be lowered as low as 3 and raised as high as 8. Part# PJ5500R Capacity 5,500 lbs Front Wheels 2 Rubber Wheels Fork Wheels Polyurethane 2 x 7 Outside Fork Width 27 Inside Fork Width 15 Fork Length 48 Handle 3 Control Position 203 lbs Part# 85.600.200 Capacity 300 Kgs. Max Height 35.5 Min Height 12.5 Wheels 5 casters Base Plate L32 x W20 160 lbs REPLACEMENT PARTS Castor Wheel 85.604.020 Fork Wheel 85.604.021

70 UTILITY AND TOOL CARTS TOOL CART, SOLID BASE UTILITY CART, OPEN DECK GARDEN CART Part# TC1820 Capacity 250 lbs Wheels 10 Pneumatic Tires Body Size L42 x W20 x H13 Frame Gray Powder Coated 64 lbs REPLACEMENT PART Tire 85.604.009 Part# TC1807 Capacity 250 lbs Wheels 10 Pneumatic Tires Body Size L48 x W24 x H12 Frame Green Powder Coated 58 lbs REPLACEMENT PART Tire 85.604.009 Part# TC1858 Capacity 500 lbs Wheels 13 Pneumatic Tires Body Size L52 x W30 x H40 Frame Green Plastic 80 lbs REPLACEMENT PART Tire 85.604.032 ACCESSORY CART ACCESSORY CART, TOOL CHEST Part# 85.600.010 Wheels 4 Lockable Casters Height 341 4 Frame Red Powder Coated Trays L29 x W151 4 x H2 31 lbs Part# 85.600.201 Wheels 4 Lockable Casters Height 341 4 Frame Red Powder Coated Trays L29 x W151 4 x H3 Drawers 2 74 lbs

JACKS 71 TOP WIND JACKS SIDE WIND JACKS TOP WIND JACK, A FRAME Part# BE-020 BE-520 Capacity 2,000 lbs 2,000 lbs Wind Top Top Lift 10 15 Length 111 2 151 2 11.2 lbs 13.5 lbs Part# BE-050 BE-550 Capacity 5,000 lbs 5,000 lbs Wind Side Side Lift 10 15 Length 111 2 151 2 14.5 lbs 16.9 lbs Part# BE-120 Capacity 2,000 lbs Wind Top Lift 13 Length 8 9.5 lbs TOP WIND JACK (PREMIUM) SIDE WIND JACK (PREMIUM) TOP WIND JACK (PREMIUM) Part# ST-2104 ST-2154 Capacity 2,000 lbs 2,000 lbs Wind Top Top Lift 10 15 Length 11 16 10.5 lbs 12.5 lbs Part# LT-5103 LT-5153 Capacity 5,000 lbs 5,000 lbs Wind Side Side Lift 10 15 Length 11 16 13.5 lbs 15 lbs Part# BE-555 Capacity 5,000 lbs Wind Top Lift 15 Length 151 2 13.8 lbs

72 TRAILER JACKS WELD FLANGE JACKS Bracket & retaining ring swivel mount. Locks in 4 positions. Includes mounting plate, retaining ring, spring loaded lock pin and grease nipple. HEAVY DUTY JACKS Heavy duty premium jacks use weld-on bracket BE-701. HEAVY DUTY JACK Heavy duty premium side wind jack, uses handle part # BE-1201. Part# FJ-020 FJ-530 Capacity 2,000 lbs 2,000 lbs Wind Top Side Lift 10 15 Length 11 15 11 lbs 14 lbs Part# BE-720 BE-700 Capacity 7,000 lbs 7,000 lbs Wind Top Side Lift 26 26 22.5 lbs 24.4 lbs Part# BE-1200 Capacity 12,000 lbs Wind Side Lift 26 62.1 lbs TRAILER JACK, SMALL Comes with grease nipple TRAILER JACK, MEDIUM Comes with grease nipple TRAILER JACK, LARGE Comes with grease nipple A A B A B B Part# TJ-06-01K Capacity 1,000 lbs Lift 10 Retracted Height (A) 24 Retracted Mount H. (B) 14 Part# TJ-01-405 Capacity 750 lbs Lift 14 Retracted Height (A) 29 Retracted Mount H. (B) 8.5-23 Part# TJ-07-51L Capacity 1,000 lbs Lift 15 Retracted Height (A) 30 Retracted Mount H. (B) 12.5

SECTION 4 HIGH PRESSURE PUMPS 75 REPLACEMENT PUMP PROGRAM 76 CAT PUMPS 2DX, 3DX 78 2SF 78 66DX 78 5CP 78 Seal Kits,Valve Kits, & Accessories 79 COMET PUMPS BXD 80 AXD 80 LWD 81 LWS 81 ZWDK 81 ZWD 81 FW 82 HWS 82 TW 82 Seal Kits,Valve Kits, & Accessories 83 GENERAL PUMPS TP 83 EZ/TX 83 T 83 TS 83 Seal Kits,Valve Kits, & Accessories 83 GEARBOXES 86

SIMPLIFY YOUR REPLACEMENT PUMP PROGRAM! 1 Comet Axial BXD for 4.0 to 7.0 HP horizontal direct drives with a 3/4 engine shaft. Part# Model GPM PSI HP RPM Shaft Motor 85.149.081B BXD2528G 2.5 2,900 4.0 to 7.0 3,400 3/4 Gas 2 Comet Triplex ZWDK pump for 8 to 13 HP horizontal direct drives with a 1 engine shaft. Part# Model GPM PSI HP RPM Shaft Motor 85.149.075B ZWDK4036G 4.0 3,600 8.0 to 13.0 3,400 1 Gas FULL COLOR BOXES LIST PUMP SPECS AND STEP-BY-STEP INSTALLATION INSTRUCTIONS! 2 PUMPS FOR ALL 4HP TO 13HP HORIZONTAL GAS PRESSURE WASHER MODELS.

78 PRESSURE WASHERS PUMPS CAT PUMPS BARE PUMPS AVAILABLE ON REQUEST 2DX, 3DX SERIES Part# Model GPM PSI HP RPM Shaft Motor 85.119.019B 2DX20E 2.2 2,000 1.5-2 3,400 5/8 Elec. 85.119.018B 2DX27GS 2.7 2,000 5.5 3,400 3/4 Gas 85.119.028B 3DX29GS1 3.0 2,500 6.5 3,400 3/4 Gas Model Seal Kit Valve Kit Oil Cap Unloader Piston 2DX20E 33053 33057 45690 33099 (orings) 542403 2DX27GS 33053 33057 45690 33099 (orings) 542403 3DX29GS1 30530 33057 45690 30378 542403 2SF SERIES Part# Model GPM PSI HP RPM Shaft Motor 85.119.012B 2SF22ES 2.0 2,000 3 3,450 5/8 Elec. 85.119.002B 2SFX30GS 3.0 2,000 5.5 3,450 3/4 Gas Model Seal Kit Valve Kit Oil Cap Unloader Piston 2SF22ES 34053 34052 45690 32097 (orings) 45847 2SFX30GS 34053 34056 45690 32097 (orings) 45847 66DX SERIES Part# Model GPM PSI HP RPM Shaft Motor 85.119.014B 66DX40GG1 4.0 3,000 11 3,400 1 Gas 85.119.025B 66DX35GG1 3.5 4,000 13 3,400 1 Gas Model Seal Kit Valve Kit Oil Cap Unloader Piston 66DX40GG1 34262 89910 48787 85.300.206 48752 66DX35GG1 34262 89910 48787 85.300.207 48752 5CP SERIES Part# Model Unloader GPM PSI HP RPM Shaft Motor 85.119.021B 5CP3120 Block Mount 4.5 3/3,500 11/13 1,645 20mm Gas 85.119.021AB 5CP3120 Pump Mount 4.5 3/3,500 11/13 1,645 20mm Gas Model Unloader Type Seal Kit Valve Kit Oil Cap Unloader Piston 5CP3120 Block Mount 33629 33060 (2) 46798 85.300.212 46884 5CP3120 Pump Mount 33629 33060 (2) 46798 85.300.207 46884

PRESSURE WASHERS PUMPS CAT PUMPS 79 BARE PUMPS AVAILABLE ON REQUEST SEAL KITS, CAT PUMPS VALVE KITS, CAT PUMPS Part# Pump Models 33053 2DX, 2X [1 kit per pump] 33629 5CP3120 [1 kit per pump] 34053 2SF, 2SFX [1 kit per pump] 34054 4SF [1 kit per pump] 34062 4HP, 5DX [1 kit per pump] 34262 6DX [1 kit per pump] Part# Pump Models 33057 2DX [1 kit per pump] 33060 5CP3120 [2 per pump] 34052 2SF [2 per pump] 34055 4SF [2 per pump] 34056 2SFX [2 per pump] 34260 4HP, 5DX, 6DX [2 per pump] 89910 5DX, 6DX, 66DX [1 per pump] OIL CAP, CAT OIL CAP, CAT SHAFT COVER FOR CAT PUMP Part# 46798 Pumps 5DX, 66DX, 5CP Part# 45690 Pumps 2SF, 4SF, 2DX Part# 85.603.021 Pump 5CP3120

80 PRESSURE WASHERS PUMPS COMET PUMPS BARE PUMPS AVAILABLE ON REQUEST BXD SERIES Part# Model GPM PSI HP RPM Shaft Motor 85.149.080B BXD2525G 2.5 2,500 5 3,400 3/4 Gas 85.149.081B BXD2528G 2.5 2,800 6.5 3,400 3/4 Gas Model Seal Kit Valve Kit Oil Cap Unloader BXD2525G 5019066700 5025001400 3200008600 1215039200 BXD2528G 5019066700 5025001400 3200008600 1215039300 AXD SERIES AXD PUMPS FOR GAS ENGINES Part# Model GPM PSI HP RPM Shaft Motor 85.149.049B AXD2325G 2.3 2,500 5 3,400 3/4 Gas 85.149.026B AXD2527G 2.5 2,700 6/6.5 3,400 3/4 Gas 85.149.028B AXD2020E 2.0 2,000 1.5-2 3,400 5/8 Elec. 85.149.025B AXD3020E 3.0 2,000 3 3,400 5/8 Elec. AXD PUMPS FOR ELECTRIC MOTORS Model Seal Kit Valve Kit Oil Cap Unloader AXD2325G 5019007800 5025001400 3200007100 1215027100 AXD2527G 5019007800 5025001400 3200007100 1215027100 AXD3030G 5019008600 5025001400 3200007100 1215027100 AXD4030G 5019008600 5025001400 3200007100 1215027100 AXD2020E 5019007700 5025001400 3200007100 1215027100 AXD3020E 5019007700 5025001400 3200007100 1215027100

PRESSURE WASHERS PUMPS COMET PUMPS 81 BARE PUMPS AVAILABLE ON REQUEST LWD SERIES Part# Model GPM PSI HP RPM Shaft Motor 85.149.021B LWDK2020E 2.2 2,000 1.5-3 3,400 5/8 Elec. 85.149.005B LWD3020E 3.0 2,000 3 3,400 5/8 Elec. 85.149.009B LWDK3020G 3.0 2,000 5.5 3,400 3/4 Gas 85.149.015B LWDK3025G 3.0 2,500 6.5 3,400 3/4 Gas Model Seal Kit Valve Kit Oil Cap Unloader Piston LWDK Models 5019003500 KIT001 3200005100 1215027100 0202002000 LWD Models 5019003500 KIT001 3200005100 85.300.003 0202002000 LWS SERIES Part# Model GPM PSI HP RPM Shaft Motor 85.149.065B LWS3025S 3.0 2,500 6.5 1,750 24 mm Gas Model Seal Kit Valve Kit Oil Cap Unloader Piston LWS3025 5019003700 KIT001 3200005100 85.300.003 0202001800 ZWD SERIES BUILT-IN UNLOADER Part# Model GPM PSI HP RPM Shaft Motor 85.149.078B ZWDK3030G 3.0 3,000 9 3,400 1 Gas 85.149.075B ZWDK4036G 4.0 3,600 11/13 3,400 1 Gas 85.149.011B ZWD3030G 3.0 3,000 9 3,400 1 Gas 85.149.012B ZWD4030G 4.0 3,000 11 3,400 1 Gas 85.149.022B ZWD4040G 4.0 4,000 13 3,400 1 Gas Model Seal Kit Valve Kit Oil Cap Unloader Piston ZWDK3030G 5019006400 KIT001 3200005100 1215032600 0202002000 ZWDK4036G 5019006400 KIT001 3200005100 1215039000 0202002000 ZWD3030G 5019006400 KIT001 3200005100 85.300.206 0202002000 ZWD4030G 5019006400 KIT001 3200005100 85.300.206 0202002000 ZWD4040G 5019006400 KIT001 3200005100 85.300.207 0202002000

82 PRESSURE WASHERS PUMPS COMET PUMPS BARE PUMPS AVAILABLE ON REQUEST FW SERIES Part# Model GPM PSI HP RPM Shaft Motor 85.149.017B FWS3530E 3.5 2,700 5-7.5 1,750 1-1/8 Elec. 85.149.008B FWS4030E 4.0 3,000 10 1,750 1-1/8 Elec. Model Seal Kit Valve Kit Oil Cap Unloader Piston FWS3530E 5019003800 KIT001 3200005100 85.300.206 0202002200 FWS4030E 5019003800 KIT001 3200005100 85.300.206 0202002200 HWS SERIES Part# Model Unloader Type GPM PSI HP RPM Shaft Motor 85.149.031B HW3540S Block Mount 3.5 4,000 11/13 1,450 24mm Gas 85.149.031AB HW3540S Pump Mount 3.5 4,000 11/13 1,450 24mm Gas 85.149.030B HWS5040S Block Mount 5.3 4,000 20 1,750 24mm Gas Model Unloader Type Seal Kit Valve Kit Oil Cap Unloader Piston HW3540S Block Mount 5019063100 KIT001 3200005100 85.300.212 0202002200 HW3540S Pump Mount 5019063100 KIT001 3200005100 85.300.207 0202002200 HWS5040S Block Mount 5019063100 KIT001 3200005100 AL607 0202002200 TW SERIES Part# Model GPM PSI HP RPM Shaft Motor 85.149.059B TW5050 5.0 5,000 24 1,450 24mm Gas 85.149.062B TW8030 8.0 3,000 24 1,450 24mm Gas 85.149.064B TW10025 10.0 2,500 24 1,450 24mm Gas Model Seal Kit Valve Kit Unloader Piston TW5050 5019064500 5025002100 85.300.013 0202004200 (18mm) TW8030 5019064600 5025002100 85.310.003 0202004300 (22mm) TW10025 5019064700 5025002100 85.310.003 0202004400 (25mm)

PRESSURE WASHERS PUMPS COMET PUMPS 83 BARE PUMPS AVAILABLE ON REQUEST TW SERIES (WITH GEARBOX) Part# Model GPM PSI HP RPM Shaft Motor 85.149.059GB TW5050 5.0 5,000 24 1,450 24mm Gas 85.149.062GB TW8030 8.0 3,000 24 1,450 24mm Gas 85.149.064GB TW10025 10.0 2,500 24 1,450 24mm Gas Model Seal Kit Valve Kit Unloader Piston TW5050 5019064500 5025002100 85.300.013 0202004200 TW8030 5019064600 5025002100 85.310.003 0202004300 TW10025 5019064700 5025002100 85.310.003 0202004400 SEAL KITS, COMET PUMPS VALVE KITS, COMET PUMPS Part# Pump Models 5025001400 BXD KIT001 ZWD, FWS, LWDK, LWS, HWS 5025001400 AXD, GXD Part# Pump Models 5019066700 BXD2528, BXD2528 [1 per pump] 5026025600 GXD2528, GXD2528 [1 per pump] 5019003500 LWDK3020G, LWDK3025G, LWDK2020E [1 per pump] 5019003800 FWD4030G [1 per pump] 5019006400 ZWD2530G, ZWD3030G, ZWD4030G, ZWD4040G, ZWDK3030, ZWDK4036, ZWDK4040 [1 per pump] 5019007700 AXD2518G, AXD2020E, AXD3020E [1 per pump] 5019007800 AXD2424G, AXD3025G [1 per pump] 5019008600 AXD3030G, AXD3530G, AXD4030G [1 per pump] 5019063100 HWS3540S, HWS5040S [1 per pump] OIL CAP, COMET Part# Description 3200005100 Most Comet Triplex 3200007500 TW Series OIL CAP, COMET Part# Description 3200008600 Comet GXD & BXD Pumps OIL CAP, COMET Part# Description 3200007100 Comet AXD Pumps

84 PRESSURE WASHERS PUMPS GENERAL PUMPS BARE PUMPS AVAILABLE ON REQUEST TP SERIES Oversized connecting rods for ultimate crankcase performance. Solid ceramic plungers continuously lubricate packings. Ideal for all general cleaning applications, commercial or residential. Part# Model GPM PSI HP RPM Shaft Motor 85.139.020B TP2530J34UIL 2.88 2,500 5.5-6.5 3,400 3/4 Gas 85.139.020SPB TP2530J34 2.88 2,500 5.5-6.5 3,400 3/4 Gas Model Seal Kit Valve Kit Oil Cap Unloader Piston TP2530J34UIL RKI097 KIT123 98210300 RKI102 51040009 TP2530J34 RKI097 KIT123 98210300 51040009 EZ/TX SERIES Solid ceramic plungers. Oversized bearings with greater load capacity means longer life. Longer life low and high pressure seals. 85.139.045B T SERIES Part# Model GPM PSI HP RPM Shaft Motor 85.139.002B TX1510G8 4.0 3,000 11 3,400 1 Gas 85.139.021B EZ4040G 4.0 4,000 13 3,400 1 Gas 85.139.045B TX1510 4.0 3,700 11/13 3,400 1 Gas Model Seal Kit Valve Kit Oil Cap Unloader Piston TX1510G8 RKI160 KIT123 98210300 85.300.206 52040009 EZ4040G RKI153 KIT123 98210300 85.300.207 44040266 TX1510 RKI160 KIT123 98210300 RKI137 52040009 BUILT-IN UNLOADER Forged brass manifold. Large capacity oil bath crankcase. Oversized connecting rods for maximum life. Heavy duty tapered roller bearings. Part# Model GPM PSI HP RPM Shaft Motor 85.139.018B T5050 5.0 5,000 24 1,845 1 Gas Model Seal Kit Valve Kit Oil Cap Unloader Piston T5050 RKI109 RKI150 98210600 85.300.013 47040856 TS SERIES Forged brass manifold. Large capacity, die-cast, anodized aluminum oil bath crankcase. Oversize connecting rods for maximum life. Heavy duty tapered roller bearings. Solid ceramic plungers with continually lubricated packings. Part# Model GPM PSI HP RPM Shaft Motor 85.139.005B TS-1511 4.0 3,500 11/13 1,450 24mm Gas 85.139.026B TS-2021 5.6 3,500 20 1,450 32mm Gas Model Seal Kit Valve Kit Oil Cap Unloader Piston TS-1511 RKI069 KIT001 98210600 85.300.012 47040409 TS-2021 RKI069 KIT001 98210600 AL607 47040409

PRESSURE WASHERS PUMPS GENERAL PUMPS 85 BARE PUMPS AVAILABLE ON REQUEST GENERAL KITS, GENERAL PUMPS Part# Description KIT001 Valve kit for TS1511, TT2028, T9281, TS2021 [1 per pump] RKI002 Piston guide oil seal kit for TS1511, T5050, TS2021, & T9281 [1 per pump] RKI004 Valve caps & O-rings (6) for TS1511, TS2021 [1 per pump] RKI007 Head rings (6) for TS1511, TS2021 [1 per pump] RKI008 20mm packing (3) for TS Series [1 per pump] RKI019 20mm packing (3) RKI021 Head rings (6) for T9721 [1 per pump] RKI023 Oil seals (3) for EZ4040 [1 per pump] RKI028 20mm seal kit for TS-1511 & TS2021 [3 per pump] RKI029 22mm packing assembly for T921 (1 cyl) RKI069 20mm seal kit for TS2021 [1 per pump] RKI083 Piston rod oil seal (3) for TP2530, TP2028 [1 per pump] RKI084 Valve cap assembly (6) TT2028 [1 per pump] Part# RKI088 RKI096 RKI097 RKI102 RKI109 KIT123 RKI130 RKI137 RKI150 RKI153 RKI160 RKI166 Description 15mm seal kit (3) for EZ4030 & EZ4040 [1 per pump] 15mm packing assembly (1cyl) for TP2530 & TT2028 [1 per pump] Seal kit for TT2028 & TP2530 (3) 15mm packing assembly [1 per pump] Unloader maintenance kit - TP2530 [1 per pump] 16mm packing seal kit for T5050 & T9281 [1 per pump] Valve kit EZ pumps (6) [1 per pump] 15mm seal for EZ Series [3 per pump] Unloader repair kit built-in TX1510 [1 /pump] Valve kit for T5050 (6) [1 per pump] Seal kit for EZ4030 & EZ4040 [1 per pump] Seal kit for TX1510 [1 per pump] Seal kit with seal retainer for TX1510 [3 per pump] OIL CAP, GENERAL WATER INLET FILTER FITTING Use on pumps with shallow inlets, such as General pumps. Part# 98210300 Pumps Most General Pumps Part# 680073 Outlet 1/2 BSP 3/4 FGHT 0.30 lbs

86 PRESSURE WASHERS GEAR BOXES GEARBOX FOR 13 & 20HP ENGINES GEARBOX FOR 24HP ENGINES Part # 90.400.300 Shaft 1 Engine Size 13 & 20HP Oil Sae 90 Gear Ratio 2.176:1 Oil Capacity 10 oz Pumps AR, Comet, General Part # 90.400.400 Shaft 1 1/8 Engine Size 24HP Oil Sae 90 Gear Ratio 2.176:1 Oil Capacity 10 oz Pumps AR, Comet, General

SECTION 5 BASIC ACCESSORIES 89 BASIC ACCESSORIES Spray Guns 90 Wands and Lances 94 Wands and Handles 96 Low Pressure Sprayers 97 Packaged Parts Display Racks 98 Packaged Parts 100 Spray Nozzles, Quick Connect 104 Spray Nozzles, Meg 105 Rotary Nozzles 106 Nozzles & Nozzle Holders 107 High Pressure Hoses 110 Low Pressure Hoses 111

90 SPRAY GUNS PACKAGING: Packaged MV 880 SPRAY GUN MV 920 SPRAY GUN MECCANICA VENETA MECCANICA VENETA Part# 85.202.001 4,000 PSI Max Temperature 300 F Max Flow 12 GPM Outlet 1/4 FNPT 3/8 FNPT Repair Kit 85.201.001 1.26 lbs Part# 85.202.010 4,000 PSI Max Temperature 300 F Max Flow 8 GPM Outlet 1/4 FNPT 3/8 FNPT Repair Kit 85.201.003 1.26 lbs SPRAY GUN, EASY-PULL The easy-pull spray gun is an anti-fatigue gun designed with a handle lock which is ideal for continuous use. Part# 85.202.020 5000 PSI Max Temperature 300 F Max Flow 12 GPM Outlet 1/4 FNPT 3/8 FNPT 1.3 lbs

SPRAY GUNS 91 PACKAGING: Packaged LOW PRESSURE SPRAY GUN VEGA SPRAY GUN Optional Swivel 23.1502.34 Part# 85.205.019 350 PSI Max Temperature 195 F Max Flow 16 GPM 3/4 FGHT 2 lbs Optional Swivel 23.1502.34 Part# 85.202.060 4500 PSI Max Temperature 320 F Max Flow 10.5 GPM Outlet 1/4 FNPT 3/8 FNPT 1.72 lbs Repair Kit 30.2031.24 RL26 SPRAY GUN RL30 SPRAY GUN Part# 85.202.205 4050 PSI Max Temperature 320 F Max Flow 6.3 GPM Outlet 1/4 FNPT 3/8 FNPT 1 lbs Part# 85.202.203 4500 PSI Max Temperature 320 F Max Flow 10.5 GPM Outlet 1/4 FNPT 3/8 FNPT 1.65 lbs Repair Kit 30.2559.24

92 SPRAY GUNS PACKAGING: Packaged RL51 SPRAY GUN RL56 SPRAY GUN Part# 85.202.200 3650 PSI Max Temperature 320 F Max Flow 13.2 GPM Outlet 1/4 FNPT 3/8 FNPT 1.46 lbs Part# 85.202.201 5100 PSI Max Temperature 320 F Max Flow 8.0 GPM Outlet 1/4 FNPT 3/8 FNPT 1.46 lbs LINEAR 2 HORIZONTAL SPRAY GUN Part# 85.202.202 3650 PSI Max Temperature 300 F Max Flow 10.5 GPM Outlet 1/4 FNPT 3/8 FNPT 1.35 lbs

SPRAY GUNS 93 PACKAGING: Packaged BE FRONT LOAD SPRAY GUN BE INDUSTRIAL SPRAY GUN Ideal for Hot and Cold water applications Part# 85.202.018 2,950 PSI Max Temperature 210 F Max Flow 7 GPM Outlet 1/4 FNPT 3/8 FNPT 0.9 lbs Part# 85.202.108 5,000 PSI Max Temperature 300 F Max Flow 8 GPM Outlet 1/4 FNPT 3/8 FNPT Repair Kit 85.201.005 1.26 lbs BE WEEPING SPRAY GUN This gun is ideal for colder climates. The weeping action means there is a constant water drip to avoid freezing water in the gun. BE HORIZONTAL SPRAY GUN Part# 85.202.068 5,000 PSI Max Temperature 300 F Max Flow 10 GPM Outlet 1/4 FNPT 3/8 FNPT Repair Kit 85.201.007 1.5 lbs Part# 85.202.063 5,000 PSI Max Temperature 300 F Max Flow 10 GPM Outlet 1/4 FNPT 3/8 FNPT Repair Kit 85.201.008 1.5 lbs

94 SPRAY GUNS & WAND ASSEMBLIES PACKAGING: Packaged GUN AND WAND ASSEMBLIES Complete assemblies of gun and wands with quick disconnect couplers. GUN AND WAND ASSEMBLIES Complete assembly built with a PA VEGA gun and wand with quick disconnect couplers. Part# Length Wand# Only 85.205.026 36 85.202.026 3.08 lbs 85.205.027 47 85.202.027 4.36 lbs 85.205.028 59 85.202.028 4.64 lbs 85.205.029 79 85.202.029 5.20 lbs SPECIFICATIONS Max Flow Max Temperature 4,000 PSI 8 GPM 300 F COMPONENTS Part# Spray Gun 85.202.108 Coupler 85.300.102 3/8 Male Plug 85.300.105 FLEXIBLE WAND Ideal for hard to reach applications, such as gutters, underneath fender walls, truck bellies and heavy equipment. Vented grip can be pushed and pulled to make wand angle up to 90. Part# Length Wand# Only 85.205.064 36 85.202.026 3.5 lbs SPECIFICATIONS Max Flow Max Temperature COMPONENTS Part# Spray Gun 85.202.060 Coupler 85.300.102 3/8 Male Plug 85.300.105 INSULATED WANDS Bare lance 1/4 MNPT thread. Part# Part# Length Stainless Steel Steel 85.202.026S 85.202.026 900mm / 36 1.32 lbs 85.202.027S 85.202.027 1,200mm / 47 1.92 lbs 85.202.028S 85.202.028 1,500mm / 59 2.30 lbs 85.202.029S 85.202.029 2,000mm / 79 2.96 lbs ALUMINUM WANDS 4,000 PSI 10.5 GPM 300 F Bare lance, 1/4 aluminum MNPT thread, schedule 80 pipe. Part# 85.202.032 3050 PSI Max Temperature 300 F Max Flow 8.0 GPM Outlet 1/4 FNPT 1/4 FNPT 2.22 lbs Part# Length 85.202.093 900mm / 36 0.70 lbs 85.202.094 1,200mm / 47 0.95 lbs 85.202.095 1,500mm / 59 1.20 lbs 85.202.096 1,800mm / 72 1.30 lbs 85.202.097 2,000mm / 79 1.50 lbs ALL WANDS Steel & Aluminum Stainless Steel 4,000 PSI 5,000 PSI Max Flow 12 GPM 12 GPM Max Temperature 300 F 300 F

SPRAY GUNS & WAND ASSEMBLIES 95 PACKAGING: Packaged 2950 PSI ACCESSORY KIT The ideal kit for use with gas pressure washers up to 2900 PSI. This kit connects with an M22 screw-type fitting. DOUBLE WAND 1/4 zinc plated pipe with molded grip. Control handle allows easy soap or chemical application. Nozzle tips are not supplied. Part# 85.400.327 6 lbs Component Part# Front Load Gun (2950 PSI) 85.202.018 Split Lance 85.205.063 Vari-Nozzle #3 85.210.007 25 ft. hose (3000 PSI) with M22 fitting 85.256.128 Part# 85.202.059 Length 43 3,650 PSI Max Temperature 300 F Max Flow 10.5 GPM 1/4 MNPT Outlet 1/4 FNPT 2.64 lbs 1800 PSI ACCESSORY KIT For use with electric pressure washers up to 1800 PSI. This kit connects with an M22 fitting. GUN & DOUBLE WAND 1/4 zinc plated pipe with molded grip. Control handle allows easy soap or chemical application. Nozzle tips are not supplied. Part# 85.400.320 Components Front Load Gun with M22 fitting Split Lance with M22 fitting Vari-Nozzle 25 ft. hose with M22 fittings Part# 85.205.059 Length 43 3,650 PSI Max Temperature 300 F Max Flow 10.5 GPM 1/4 MNPT Outlet 1/4 FNPT 4.36 lbs COMPONENTS Part# Double Lance 85.202.059 Spray Gun 85.202.060 3/8 Male Plug 85.300.105

96 WANDS AND HANDLES PACKAGING: Packaged FLEX WAND, RUBBER CASING FLEX WAND ASSEMBLY Comes with 85.215.030 MEG nozzle - Size 030. Part# 85.202.062 Size 1/4 MNPT x 1/4 MNPT Color Black Part# 85.202.081 85.202.082 Size 1/4 MNPT x 1/4 MNPT 1/4 MNPT x 1/8 FNPT Color Blue Blue Part# 85.205.081 2,250 PSI Length 27.5 1/4 MNPT Outlet 1/4 MNPT (fits MEG nozzle) LS-12 FOAMER Foamer must be thoroughly rinsed after each use to prevent soap build-up or blockage. Part# 85.202.083 85.202.084 Size 1/4 MNPT x 1/4 MNPT 1/4 MNPT x 1/8 FNPT Color Red Red ALL FLEX WANDS 2,250 PSI Length 18 0.91 lbs Part# 85.400.045 2,900 PSI Max Temperature 140 F Max Flow 6.5 GPM 1/4 FBSP Nozzle 1.5 mm Replacement Screen 25.1806.51 Repl. Chem Injector 21.0100.00 1.0 lb LANCE HANDLE, C-CLAMP Fits on any standard pressure washer lance for extra hold. LANCE HANDLES, SCREW TYPE, RUBBER Fits on any standard pressure washer lance for extra hold. Part# 85.202.066 Material Plastic 0.36 lbs Part# 85.202.067 Material Rubber 0.36 lbs Part# 85.202.045 Material Rubber 0.36 lbs

LOW PRESSURE SPRAYERS 97 PACKAGING: Packaged HANDHELD SPRAYER STAINLESS STEEL SPRAYERS WITH GAUGE Part# Capacity Pressure 90.700.012 1.2 Litre / 40 oz 10 PSI 0.7 lbs 90.700.002 2.0 Litre / 68 oz 10 PSI 0.9 lbs 90.700.065 6.5 Litres / 1.7 Gal. 55 PSI 3.45 lbs 90.700.008 8.0 Litres / 2 Gal. 55 PSI 4.0 lbs Part# Capacity Pressure 90.701.004 4 Litres / 1 Gal. 40 PSI 5.25 lbs 90.701.006 6 Litres / 1.5 Gal. 40 PSI 6.35 lbs 90.701.008 8 Litres / 2 Gal. 40 PSI 6.75 lbs 90.701.010 10 Litres / 2.5 Gal. 40 PSI 7.45 lbs BACKPACK SPRAYER The backpack sprayer is lightweight and easy to use, it comes complete with a lever action piston pump, a quick fitting harness, and four spray tips. SPOT SPRAYER Low pressure gun to fit 3/8 hose. Part# U45050000 Length 600 mm (24 ) 3/8 Hose barb Material Aluminum wand Max Flow 12 GPM 0.42 lbs TELESCOPING SPOT SPRAYER Low pressure gun to fit 3/8 hose. Part# 90.703.016 Capacity 16 Litre / 4.2 Gallons Pressure 15-90 PSI Nozzles 4 Part# U45050005 Length 1500 mm (60 ) 3/8 Hose barb Material Aluminum wand Max Flow 12 GPM 0.60 lbs

98 PACKAGED PARTS PACKAGING: Packaged Enhance your point of sale display with BE s parts display racks.

PACKAGED PARTS 99 PACKAGING: Packaged RACK PART# 85.900.500 COMPLETE WITH ALL THE FOLLOWING PRODUCTS. TO REPLENISH YOUR PARTS RACK SEE PAGES 101-103. QTY PART # DESCRIPTION 5 85.201.040BEP Quick Connect 040, 0 Nozzle 5 85.216.040BEP Quick Connect 040, 15 Nozzle 5 85.226.040BEP Quick Connect 040, 25 Nozzle 5 85.241.040BEP Quick Connect 040, 40 Nozzle 5 85.201.035BEP Quick Connect 035, 0 Nozzle 5 85.216.035BEP Quick Connect 035, 15 Nozzle 5 85.226.035BEP Quick Connect 035, 25 Nozzle 5 85.241.035BEP Quick Connect 035, 40 Nozzle 5 85.300.109BEP Quick Connect Plug, 1 4 MNPT 5 85.300.101BEP Quick Connect Plug, 1 4 FNPT 5 85.300.102BEP Sure Lock QC 1 4 FNPT Coupler, Brass 5 85.300.107BEP Sure Lock QC 1 4 MNPT Coupler, Brass 5 85.266.400BEP Quick Connect Chemical Nozzle 5 85.300.103BEP Sure Lock QC 3/8 FNPT Coupler, Brass 5 85.300.108BEP Sure Lock QC 3/8 MNPT Coupler, Brass 5 85.400.200 Orings set of 6, 4 x 1/4 & 2 x 3/8 5 85.300.090BEP Adj Chem. Injector, 3/8 MNPT x 3/8 MNPT 5 85.300.105BEP Quick Connect Plug, 3/8 MNPT 5 85.300.104BEP Quick Connect Plug, 3/8 FNPT 4 85.202.108BEP 5,000 PSI Rear Load Spray Gun 3 85.210.170 2,500 PSI Rotary Nozzle 3 85.210.020 2,000 to 5,100 PSI Rotary Nozzle 3 85.400.005BEP 3 Ft Chemical Hose Assy with Filter 5 85.210.030BEP Quick Connect 030 Nozzle Set, 0 /15 /40 / and Soaper 5 85.210.040BEP Quick Connect 040 Nozzle Set, 0 /15 /40 / and Soaper 1 85.205.026 36 Gun and Wand 1 85.238.151 50 ft, 3/8 3,000 PSI Hose, Boxed with Couplers 1 85.238.156 50 ft, 3/8 5,000 PSI Non-Marking Hose, Boxed 5 85.400.101BEP Teflon Tape (1/2 ) 3 17620-ZE2-WOOBE Gas Cap for Honda GX Engines 5 85.519.001(BEP) Spark Plug for Honda GC & GX Engines 1 85.550.002 Filter for GX160/GX200 Engines (5.5 & 6.5HP) 1 85.550.003 Filter for GX240/GX270 Engines (8 & 9HP) 1 85.550.004 Filter for GX340/GX390 Engines (11 & 13HP) 3 85.305.001 5,000 PSI Q/C Gauge Kit 3 85.400.060 12 Waterbroom - 3 Nozzle 12 85.490.000 1L Pump Oil - 30W Non Detergent 1 85.490.054 Multi-pack of chemical 3 85.400.001 Low Pressure Q/C Soap Injector Kit 5 85.400.033(BEP) Gutter Cleaner with M22 and 1/4 W/C

100 PACKAGED PARTS PACKAGING: Packaged BUBBLE PACK SIZE CHART Build your own Pressure Washer display using one of three parts racks and the products listed on the following pages. There are five main display package sizes available. The parts on the following pages indicate the package size to aid in planning an accessory display. Bubble Pack Size Chart Pack Size X-Small (XS) Small (S) Medium (M) Large (L) X-Large (XL) Height 4 3/4 5 1/4 6 3/4 10 3/4 11 3/4 Width 3 1/4 4 4 1/2 4 1/2 7 Depth 1 3/8 1 1/4 2 1/4 2 1/2 1 3/8 DISPLAY RACKS Use these display racks for a clean professional display of BE parts and accessories. Purchase a packaged parts display kit, and receive a free display rack. See pricelist for details. Part# 85.900.007 Description Wall Mount Includes 8 Large and 14 Small Hooks Size 34.5 W x 36 H Part# 85.900.005 Description Large Floor Mount Parts Rack, With Signage, Fits Three Pressure Washers and Parts Size 30 W x 61 H x 35.5 L Part# 85.900.000A Description Large Floor Mount Parts Rack, With Signage Includes 13 Large & 24 Small Hooks, 2 Wire Accy Bins Rack Size 34.5 W x 65 H Bin Sizes Lower Bin: 33 W x 16 L Side Bin: 6 W x 6 L x 29.5 H

PACKAGED PARTS 101 PACKAGING: Packaged QC & MEG SPRAY NOZZLES All MEG and Quick Connect Nozzles are available in extra small (XS) display packs. See pages 104-105 for a complete list of nozzles. SPRAY NOZZLE KITS Quick Connect Nozzles kits have a 0, 15, 40 & Soaper Nozzle. Part# Description Size Box Qty 85.210.025BEP Quick Connect 025 Nozzle Set S 10 85.210.030BEP Quick Connect 030 Nozzle Set S 10 85.210.035BEP Quick Connect 035 Nozzle Set S 10 85.210.040BEP Quick Connect 040 Nozzle Set S 10 85.210.045BEP Quick Connect 045 Nozzle Set S 10 85.210.050BEP Quick Connect 050 Nozzle Set S 10 85.210.055BEP Quick Connect 055 Nozzle Set S 10 SPRAY GUNS, ROTARY & VARIABLE NOZZLES See pages 90-93 for details about spray guns and pages 106-108 for more information about nozzles. Part# Description Size Box Qty 85.202.018BEP 2,950 PSI Front Load Spray Gun XL 5 85.202.108BEP 5,000 PSI Rear Load Spray Gun XL 5 85.202.045BEP Side Handle For Single Lance M N/A 85.210.007BEP Variable Nozzle, 1.15mm #3.0 L 10 85.210.002BEP Variable Nozzle, 1.2mm #4 L 5 85.210.003BEP Variable Nozzle, 1.3mm #4.5 L 5 85.210.005BEP Variable Nozzle, 1.35mm #5 L 5 85.210.006BEP Variable Nozzle, 1.45mm #5.5 L 10 85.210.170 Dirt Killer Rotary Nozzle, 2500 PSI L 5 85.210.180 Dirt Killer Rotary Nozzle, 3000 PSI L 5 85.210.190 Dirt Killer Rotary Nozzle, 4000 PSI L 5 85.210.011 Dirt Killer Rotary Nozzle, 5000 PSI L 5 85.210.012 Dirt Killer Rotary Nozzle, 7350 PSI L 5 Feel free to contact us if you require additional products in bubble packaging. UNLOADERS & VALVES For more information on unloaders see pages 114-115, for more on valves see pages 116-119. Part# Description Size Box Qty AL607BEP AL607 Unloader, 4200 PSI Max L N/A 85.300.001BEP MV550 Unloader, 3600 PSI Max L N/A 85.300.003BEP MV540 Unloader, 2500 PSI Max L 5 85.300.023BEP Thermal Valve, 3/8 MNPT XS 10 85.300.024BEP Thermal Valve, 1/2 MNPT XS 10 85.300.042BEP Safety Relief Valve, 3/8 MNPT XS 10

102 PACKAGED PARTS PACKAGING: Packaged O-RINGS & COUPLERS See pages 120-121 for details about the couplers listed below. Part# Description Size Box Qty 85.400.200 O-Ring Set of 6 Includes 4x1 4 & 2x3/8 XS 15 85.400.201 3/8 Brass QC FNPT with SS Sleeve & S 10 3/8 Steel QC FNPT Plug 85.400.202 3/8 & 1/4 QC FNPT Brass Coupler, S 10 3/8 & 1/4 QC FNPT Steel Plug 85.300.102BEP Sure Lock Quick Connect Coupler, 1/4 XS 10 FNPT, Brass 85.300.102SBEP Sure Lock Quick Connect Coupler, 1/4 XS 10 FNPT, Stainless Steel 85.300.103BEP Sure Lock Quick Connect Coupler, 3/8 XS 10 FNPT, Brass 85.300.103SBEP Sure Lock QC Coupler, 3/8 FNPT, SS XS 10 85.300.107BEP Sure Lock Quick Connect Coupler, 1/4 XS 10 MNPT, Brass 85.300.107SBEP QC Coupler, 1/4 MNPT, SS XS 10 85.300.108BEP Sure Lock Quick Connect Coupler, 3/8 XS 10 MNPT, Brass 85.300.108SBEP Sure Lock Quick Connect Coupler, 3/8 XS 10 MNPT, Stainless Steel 85.300.114BEP Sure Lock Quick Connect Coupler, 1/4 XS 10 FNPT, Brass with SS Sleeve 85.300.115BEP Sure Lock Quick Connect Coupler, 3/8 XS 10 FNPT, Brass with SS Sleeve 85.300.117BEP Sure Lock Quick Connect Coupler, 3/8 XS 10 MNPT, Brass with SS Sleeve 85.300.162BEP QC Coupler, 1/4 FNPT, Brass with Long SS Sleeve XS 10 KITS & ACCESSORIES For more information on these kits and accessories, see section 7. Part# Description Size Box Qty 85.305.000BEP 2.5 SS Gauge, 5,000PSI, 1/4 MNPT L 5 85.305.001 5000 PSI Q/C Gauge Kit L 10 85.300.058BEP Water Filter, 3/4 FGHT, M 5 1/2 MNPT Outlet 85.211.007BEP High Pressure Water Filter, 1/4 S 5 MNPT Outlet x 1/4 QC, SS 85.400.000 Multi Flow Soap Injector Kit L 5 Q/C or 3/8 MNPT 85.400.001 Low Pressure Soap Injector Kit, Q/C M 5 85.400.003 High Pressure Soap Injector Kit, Q/C L 5 85.400.005BEP 3 Ft Chemical Injector Hose with L 5 soap filter 85.300.090BEP Adjustable Chemical Injector, 3/8 S 10 MNPT x 3/8 MNPT 85.300.091BEP Adjustable Chemical Injector, 3/8 S 10 MNPT x 3/8 MNPT 85.400.033BEP Gutter Cleaner, M22 & 1 4 QC coupler XL 5 85.400.101BEP Teflon Tape (1 2 ) S 20 85.519.001BEP Spark Plug, Honda GC & GX Engines S 10

PACKAGED PARTS 103 PACKAGING: Packaged PLUGS For more information on plugs refer to page 121. Part# Description Size Box Qty 85.300.101BEP Plug,1/4 FNPT, Plated Steel XS 10 85.300.101SBEP Plug, 1/4 FNPT, Stainless Steel XS 10 85.300.104BEP Plug, 3/8 FNPT, Plated Steel XS 10 85.300.104SBEP Plug, 3/8 FNPT, Stainless Steel XS 10 85.300.105BEP Plug, 3/8 MNPT, Plated Steel XS 10 85.300.105SBEP Plug, 3/8 MNPT, Stainless Steel XS 10 85.300.109BEP Plug, 1/4 MNPT, Plated Steel XS 10 85.300.109SBEP Plug, 1/4 MNPT, Stainless Steel XS 10 85.300.161BEP Plug, 1/4 FNPT, Stainless Steel, with long sleeve XS 10 SWIVELS & FITTINGS For detailed information on swivels and fittings see page 122. Part# Description Size Box Qty 85.300.110BEP Swivel, 3/8, Brass, 4,000 PSI XS 10 85.300.111BEP Swivel, 1 4, Brass, 4,000 PSI XS 10 85.300.112BEP Swivel, 3/8, Stainless Steel, 5,000 PSI XS 10 85.300.113BEP Swivel, 1 4, Stainless Steel, 5,000 PSI XS 10 85.300.124BEP Female M22 Screw-Type, 1 4 FNPT XS 10 85.300.125BEP Female M22 Screw-Type, 3/8 FNPT XS 10 85.300.126BEP Male M22 Screw-Type,1 4 FNPT XS 10 85.300.127BEP Male M22 Screw-Type, 3/8 FNPT XS 10 85.300.132BEP Male M22 Screw-Type,1 4 MNPT XS 10 85.300.133BEP Male M22 Screw-Type, 3/8 MNPT XS 10 85.300.135BEP Female M22 Screw-Type,1 4 MNPT XS 10 85.300.136BEP Female M22 Screw-Type x 3/8 MNPT XS 10 85.300.142BEP Female M22 x 3/8 Quick Connect XS 10 85.300.146BEP M22 Female x M22 Female XS 10 GARDEN HOSE FITTINGS See page 123 for details about garden hose fittings. Part# Description Size Box Qty 85.300.137BEP 1 2 Garden Hose Plug x 3 4 MGHT XS 10 85.300.147BEP 1 2 Garden Hose Plug x 3 4 FBSP XS 10 85.300.138BEP 1 2 Garden Hose Coupler, 3 4 FGHT XS 10 85.300.119BEP 3 4 FGHT Adaptor, 3/8 MNPT XS 10 85.300.120BEP 3 4 FGHT Adaptor, 1 2 MNPT XS 10

104 QUICK CONNECT SPRAY NOZZLES PACKAGING: Packaged QUICK CONNECT SPRAY NOZZLES 0 15 25 40 Part# Size 85.201.020 020 85.201.025 025 85.201.030 030 85.201.035 035 85.201.040 040 85.201.045 045 85.201.050 050 85.201.055 055 85.201.060 060 85.201.065 065 85.201.070 070 85.201.075 075 85.201.080 080 85.201.085 085 85.201.090 090 Part# Size 85.216.020 020 85.216.025 025 85.216.030 030 85.216.035 035 85.216.040 040 85.216.045 045 85.216.050 050 85.216.055 055 85.216.060 060 85.216.065 065 85.216.070 070 85.216.075 075 85.216.080 080 85.216.085 085 85.216.090 090 Part# Size 85.226.020 020 85.226.025 025 85.226.030 030 85.226.035 035 85.226.040 040 85.226.045 045 85.226.050 050 85.226.055 055 85.226.060 060 85.226.065 065 85.226.070 070 85.226.075 075 85.226.080 080 85.226.085 085 85.226.090 090 Part# Size 85.241.020 020 85.241.025 025 85.241.030 030 85.241.035 035 85.241.040 040 85.241.045 045 85.241.050 050 85.241.055 055 85.241.060 060 85.241.065 065 85.241.070 070 85.241.075 075 85.241.080 080 85.241.085 085 85.241.090 090 NOZZLE SIZE CHART Match your PSI with your GPM to determine correct nozzle size. PSI 1,000 2,000 3,000 4,000 5,000 Size GPM GPM GPM GPM GPM 020 1.00 1.41 1.73 2.00 2.24 025 1.25 1.77 2.17 2.50 2.80 030 1.50 2.12 2.60 3.00 3.35 035 1.75 2.47 3.03 3.50 3.91 040 2.00 2.83 3.46 4.00 4.47 045 2.25 3.18 3.90 4.50 5.03 050 2.50 3.54 4.33 5.00 5.59 055 2.75 3.89 4.76 5.50 6.15 060 3.00 4.24 5.20 6.00 6.71 065 3.25 4.60 5.63 6.50 7.27 070 3.50 4.95 6.06 7.00 7.83 075 3.75 5.30 6.50 7.50 8.39 080 4.00 5.66 6.93 8.00 8.94 085 4.25 6.01 7.36 8.50 9.50 090 4.50 6.36 7.79 9.00 10.06 100 5.00 7.07 8.66 10.00 11.18 QUICK CONNECT CHEMICAL NOZZLE Used to apply soap and chemicals. Part# 85.266.400 85.266.401 1/4 Quick Connect 1/4 Quick Connect Material Brass, Plastic #40 Plastic #40 0.04 lbs 0.02 lbs

1 4 MEG SPRAY NOZZLES 105 PACKAGING: Packaged 1 4 MEG SPRAY NOZZLES 0 15 25 40 Part# Size 85.200.020 020 85.200.025 025 85.200.030 030 85.200.035 035 85.200.040 040 85.200.045 045 85.200.050 050 85.200.055 055 85.200.060 060 85.200.065 065 85.200.070 070 85.200.075 075 85.200.080 080 85.200.085 085 85.200.090 090 Part# Size 85.215.020 020 85.215.025 025 85.215.030 030 85.215.035 035 85.215.040 040 85.215.045 045 85.215.050 050 85.215.055 055 85.215.060 060 85.215.065 065 85.215.070 070 85.215.075 075 85.215.080 080 85.215.085 085 85.215.090 090 Part# Size 85.225.020 020 85.225.025 025 85.225.030 030 85.225.035 035 85.225.040 040 85.225.045 045 85.225.050 050 85.225.055 055 85.225.060 060 85.225.065 065 85.225.070 070 85.225.075 075 85.225.080 080 85.225.085 085 85.225.090 090 Part# Size 85.240.020 020 85.240.025 025 85.240.030 030 85.240.035 035 85.240.040 040 85.240.045 045 85.240.050 050 85.240.055 055 85.240.060 060 85.240.065 065 85.240.070 070 85.240.075 075 85.240.080 080 85.240.085 085 85.240.090 090 NOZZLE SIZE CHART Match your PSI with your GPM to determine correct nozzle size. PSI 1,000 2,000 3,000 4,000 5,000 Size GPM GPM GPM GPM GPM 020 1.00 1.41 1.73 2.00 2.24 025 1.25 1.77 2.17 2.50 2.80 030 1.50 2.12 2.60 3.00 3.35 035 1.75 2.47 3.03 3.50 3.91 040 2.00 2.83 3.46 4.00 4.47 045 2.25 3.18 3.90 4.50 5.03 050 2.50 3.54 4.33 5.00 5.59 055 2.75 3.89 4.76 5.50 6.15 060 3.00 4.24 5.20 6.00 6.71 065 3.25 4.60 5.63 6.50 7.27 070 3.50 4.95 6.06 7.00 7.83 075 3.75 5.30 6.50 7.50 8.39 080 4.00 5.66 6.93 8.00 8.94 085 4.25 6.01 7.36 8.50 9.50 090 4.50 6.36 7.79 9.00 10.06 100 5.00 7.07 8.66 10.00 11.18 MEG CHEMICAL NOZZLE Used to apply soap and chemicals. Part# 85.240.300 1/4 MNPT Material Brass 0.04 lbs

106 ROTARY NOZZLES PACKAGING: Packaged 3 Durable Ceramic Spray Nozzle resistant to abrasion. 1 Circular Spray Pattern maximizes pressure and impact. 2 Rotating motion produces a scrubbing action to help lift dirt. Patented Spring-Loaded Nozzle can be Started in any Position! One Rotary Nozzle works with all pressure washers from 2,000 to 5,100 PSI and a 2.7 to 9.0 GPM flow! 5100 PSI SPRING LOADED ROTARY NOZZLE Can be started in any position thanks to the spring-loaded feature which eliminates chipping of the ceramic nozzle. Temperature Nozzle 5100 PSI 212 F Max 1/4 Quick Connect Ceramic (spring-loaded) 1.0 Lb Part# 85.210.020 Size #4.0 Max Flow 9.0 GPM Min Flow 2.7 GPM

ROTARY NOZZLES 107 PACKAGING: Packaged 4 Protective covering to prevent damage. 5 Inline Water Filter protects the system from contaminants in the water. FILTER, INLINE HIGH PRESSURE Protects the system from contaminants in the water. ROTARY NOZZLE, STAINLESS STEEL ASSEMBLY Part# 85.211.007 1/4 Quick Connect Part# 85.211.006 1/4 FNPT 5,500 PSI Max Temperature 200 F Max Flow 8 GPM 1/4 FNPT or 1/4 Quick Connect Outlet 1/4 MNPT 0.23 lbs Part# 85.210.012 7,350 PSI Max Temperature 130 F Max Flow 5 GPM 1/4 quick-connect Nozzle Ceramic Repair Kit# 85.211.002 2.6 lbs 2,500 TO 5,000 PSI ROTARY NOZZLES MECCANICA VENETA Part# 85.210.170 85.210.180 85.210.190 85.210.011 2,500 PSI 3,000 PSI 4,000 PSI 5,000 PSI Max Temp 130 F 130 F 130 F 130 F Max Flow 3 GPM 4 GPM 4 GPM 4.5 GPM 1/4 quick-connect 1/4 quick-connect 1/4 quick-connect 1/4 quick-connect Nozzle Brass Ceramic Ceramic Ceramic Repair Kit N/A 85.211.005 85.211.003 85.211.004 0.60 lbs 1.15 lbs 1.30 lbs 2.00 lbs

108 NOZZLES PACKAGING: Packaged VARIABLE-NOZZLES, WITH FINGER PROTECTION ALL VARI-NOZZLES Temperature 140 F Max 1/4 FNPT 0.34 lbs Part# 85.210.007 Size 1.05mm #3 GPM 1.58-3.12 HI-LO ROTARY NOZZLE Part# 85.210.002 Size 1.20mm #4 GPM 2.00-3.44 Hi-Lo pressure feature eliminates having to change to a low pressure nozzle for soap and chemical application. Part# 85.210.003 Size 1.30mm #4.5 GPM 2.32-3.96 Part# 85.210.005 Size 1.35mm #5 GPM 2.58-4.32 SOFT - HARD ROTARY NOZZLE Part# 85.210.006 Size 1.45mm #5.5 GPM 2.80-4.76 Offers the cleaning efficiency of a hi-pressure rotating nozzle with the feature of changing from a hard spray for concrete to soft spray for wood by simply pushing or pulling the nozzle. Part# 85.210.016 Max Temperature 140 F 2500 PSI 1/4 FNPT Orifice 030 0.75 lbs Part# 85.210.017 Max Temperature 200 F 3600 PSI 1/4 FNPT Orifice 040 0.73 lbs ROTARY NOZZLE WITH ROTATION CONTROLLER Offers the ability to adjust from the standard number of rotations to a lesser amount for optimum impact and cleaning efficiency. Part# 85.210.013 Max Temperature 212 F 5000 PSI 1/4 FNPT Orifice 040 1.7 lbs

NOZZLES AND HOLDERS 109 PACKAGING: Packaged LASER NOZZLE, DRAIN CLEANING Allows you to effectively clear clogged drain pipes. The nozzle is built with one front jet and three rear facing jets. STAINLESS STEEL ROLL-OVER NOZZLE Allows you to easily switch between 2 nozzles. Part# Size PSI Orifice Temp. 85.210.146 1/8 4,000 050 300 F 0.02 lbs 85.210.156 1/8 4,000 060 300 F 0.02 lbs 85.210.246 1/4 4,000 065 300 F 0.02 lbs Part# 85.210.000 3,000 PSI Max Temperature 140 F Max Flow 7 GPM 1/4 FNPT Outlet 2 x 1/4 FNPT Material Stainless Steel 0.36 lbs STEAM NOZZLE ADJUSTABLE NOZZLE HOLDER Twist this nozzle to switch between soap and water streams. Part# 85.210.008 Size 1.5 mm 1450 PSI 1/4 FNPT Material Brass 0.30 lbs Part# 85.210.001 3,650 PSI Max Flow 8 GPM 1/4 FBSP 0.25 lbs NOZZLE HOLDER, LANCE MOUNTED Part# 85.210.014 Number of Nozzle Slots 7 (does not come with nozzles) Material Stainless Steel 0.53 lbs

110 HIGH PRESSURE HOSE PACKAGING: Packaged 3,000 PSI HIGH PRESSURE HOSE, HOT/COLD WATER USE 3,600 PSI HIGH PRESSURE HOSE, COLD WATER USE Part# Couplers Length Size 85.238.128 * Brass 25 3/8 5.14 lbs 85.238.151 * Brass 50 3/8 10.24 lbs 85.238.111 Brass 100 3/8 18.68 lbs 85.238.110 None 100 3/8 18.6 lbs * Boxed Packaging SPECIFICATIONS Wire Braid Single Wire Braid Material Rubber 4,000 PSI (85.238.128 is 3,000) Max Temperature 200 F Part# Couplers Length Size 85.256.126 * Brass 25 5/16 4.64 lbs 85.256.125 Plug Only 25 5/16 4.36 lbs * Boxed Packaging SPECIFICATIONS Wire Braid Material Max Temperature Single Wire Braid Santoprene 3,600 PSI 140 F 4,000 PSI HIGH PRESSURE HOSE, NON-MARKING ASSY 5,000 PSI HIGH PRESSURE HOSE, HOT/COLD WATER USE COMES WITH STAINLESS STEEL COUPLERS Part# Couplers Length 85.238.155 Stainless Sleeve 50 11.44 lbs 85.238.154 None 50 11.14 lbs 85.238.156* Stainless Sleeve 50 11.84 lbs * Boxed Packaging SPECIFICATIONS Wire Braid Single Wire Braid 4,000 PSI Max Temperature 250 F Size 3/8 Part# Couplers Length 85.238.251 Stainless Steel 50 15.56 lbs 85.238.250 None 50 15.48 lbs 85.238.211 Stainless Steel 100 30.28 lbs 85.238.210 None 100 30.20 lbs SPECIFICATIONS Wire Braid Double Wire Braid 5,000 PSI Max Temperature 200 F Size 3/8 SEWER CLEANING HOSE SPECIFICATIONS 2,900 PSI Max Temperature 195 F Size 3/16 Hose Fitting Size 1/8 MNPT Part# Description Length 85.236.050 1/8 MNPT 50 2.39 lbs 85.236.100 1/8 MNPT 100 4.77 lbs

LOW PRESSURE HOSE 111 PACKAGING: Packaged DISCHARGE HOSE KITS Temperature Rating: 150 F INDUSTRIAL DISCHARGE HOSE KITS Temperature Rating: 150 F Part# Length Size Pressure 85.400.084 50 ft. 1 80 PSI 21.0 lbs 85.400.085 50 ft. 2 80 PSI 22.0 lbs 85.400.086 50 ft. 3 65 PSI 23.0 lbs 85.400.087 50 ft. 4 55 PSI 24.0 lbs Part# Length Size Pressure 85.400.097 50 ft. 2 150 PSI 23.0 lbs 85.400.098 50 ft. 3 150 PSI 24.0 lbs DISCHARGE HOSE, BULK Light weight PVC lays flat and rolls up tightly for storage. INDUSTRIAL DISCHARGE HOSE, BULK Light weight PVC lays flat and rolls up tightly for storage. Part# Length Size Pressure G971-125 25 ft. 1 80 PSI 8.5 lbs G971-225 25 ft. 2 80 PSI 9 lbs G971-325 25 ft. 3 65 PSI 9 lbs G971-425 25 ft. 4 55 PSI 9.5 lbs G971-100 50 ft. 1 80 PSI 17 lbs G971-200 50 ft. 2 80 PSI 18 lbs G971-300 50 ft. 3 65 PSI 18 lbs G971-400 50 ft. 4 55 PSI 19 lbs Part# Length Size Pressure G972-225 25 ft. 2 150 PSI 9 lbs G972-325 25 ft. 3 150 PSI 9.5 lbs G972-200 50 ft. 2 150 PSI 18 lbs G972-300 50 ft. 3 150 PSI 18 lbs SUCTION HOSE KITS Part# Length Size 85.400.088 25 ft. 1 5 lbs 85.400.089 25 ft. 2 12 lbs 85.400.090 25 ft. 3 16 lbs 85.400.091 25 ft. 4 20 lbs

SECTION 6 VALVES AND FITTINGS 113 VALVES AND FITTINGS Unloaders 114 Ball Valves 116 Valves 118 Orings 120 Sure-Lock Couplers 120 Couplers and Plugs 121 Screw-Type Fittings 122 Garden Hose and Nozzle Fittings 123

114 UNLOADERS PACKAGING: Packaged MV UNLOADERS UNLOADER, ARROWLINE EZ-START MV540 MV550 MV580 Part# 85.300.003 85.300.001 85.300.005 2,500 PSI 3,600 PSI 4,000 PSI Max Temperature 200 F 200 F 200 F Max Flow 8 GPM 8 GPM 8 GPM /Outlet 3/8 MNPT 3/8 MNPT 3/8 MNPT Bypass 3/8 FNPT 1/4 FNPT 1/4 FNPT 0.9 lbs 1.65 lbs 2.1 lbs Part# Max Temperature Max Flow /Outlet Bypass AL607EZ 4,350 PSI 190 F 7.8 GPM 3/8 FNPT 3/8 FNPT 2.1 lbs REPAIR KITS 85.300.003 85.300.001 85.300.005 Repair Kit 85.301.002 85.301.005 85.301.005 Black Plastic Knob 119740010 119000010 119000010 Seal Kit N/A 85.300.010 85.300.010 REPAIR KITS Part# Repair Kit 005-650200 MV UNLOADERS UNLOADER, ARROWLINE MV595 MV 595B MV 590 Comes with builtin thermal valve (145 F) and safety relief valve. Comes with built-in thermal valve (145 F) and safety relief valve. Ideal for use with an unloader block. Comes with built-in thermal valve and adjustable chemical injector. Part# 85.300.007 85.300.012 85.300.006 4,000 PSI 4,000 PSI 3,600 PSI Max Temperature 145 F 145 F 145 F Max Flow 8 GPM 8 GPM 8 GPM /Outlet 3/8 FNPT 3/8 MNPT 3/8 MNPT Bypass 1/4 FNPT 1/4 FNPT 1/4 FNPT 2.4 lbs 2.4 lbs 2.2 lbs REPAIR KITS 85.300.007 85.300.012 85.300.006 Repair Kit 85.301.006 85.301.006 85.301.005 Red Plastic Knob 0119000170 0119000170 0119000120 Thermal Valve Repair Kit 0215102900 0215102900 0215102900 Safety Valve Repair Kit 0215102820 0215103300 N/A Seal Kit N/A N/A 85.300.010 Soap Injector Kit N/A N/A 0203100020 Part# Max Temperature Max Flow /Outlet Bypass AL607 4,200 PSI 190 F 7.8 GPM 3/8 FNPT 3/8 FNPT 2.1 lbs REPAIR KITS Part# Repair Kit 005-650200 Part # 85.755.006 Male 3/8 x Male 3/8 NPT Adapter

UNLOADERS 115 PACKAGING: Packaged UNLOADER, PA UNLOADER, VB80/280 PA UNLOADER Part# 85.300.013 5,000 PSI Max Temperature 190 F Max Flow 7.8 GPM 3/8 MNPT Outlet 3/8 FNPT Bypass 3/8 FNPT 2.1 lbs REPAIR KITS Part# Repair Kit 85.400.025 Part# 85.310.003 4,000 PSI Max Temperature 180 F Max Flow 21 GPM /Outlet 1/2 FNPT Bypass 1/2 FNPT 3.05 lbs REPAIR KITS Part# Repair Kit 85.400.026 Part# 85.300.207 4500 PSI Max Temperature 195 F Max Flow 8.0 GPM / Outlet 3/8 MNPT Bypass 3/8 FNPT 2.0 lbs REPAIR KITS Part# Repair Kit 85.300.221 Thermal Valve 85.300.223 PA UNLOADER, WITH EZ-START PA UNLOADER, WITH EZ-START PA UNLOADER, WITH EZ-START Part# 85.300.017 4,500 PSI Max Temperature 195 F Max Flow 8 GPM 3/8 FNPT Outlet 3/8 FNPT Bypass 3/8 FNPT 1.75 lbs REPAIR KITS Part# Repair Kit 85.300.221 Safety Relief 85.300.222 Part # 85.755.006 Male 3/8 x Male 3/8 NPT Adapter Part# 85.300.212 4500 PSI Max Temperature 195 F Max Flow 8.0 GPM 3/8 MNPT Outlet 3/8 MNPT Bypass 3/8 FNPT 1.95 lbs REPAIR KITS Part# Repair Kit 85.300.221 Thermal Valve 85.300.223 Safety Relief 85.300.224 Part# 85.300.206 3600 PSI Max Temperature 195 F Max Flow 8.0 GPM 3/8 MNPT Outlet 3/8 MNPT Bypass 3/8 FNPT 2.0 lbs REPAIR KITS Part# Repair Kit 85.300.225 Thermal Valve 85.300.223 Chemical Injector 85.300.226

116 BALL VALVES PACKAGING: Packaged BALL VALVES, STAINLESS STEEL Full port Stainless Steel ball valve. BALL VALVES, BRASS Full port Brass ball valve. Part# Size PSI Thread 91.200.001 1/4 1,000 FNPT 0.20 lbs 91.200.002 3/8 1,000 FNPT 0.30 lbs 91.200.003 1/2 1,000 FNPT 0.50 lbs 91.200.004 3/4 1,000 FNPT 0.70 lbs 91.200.005 1 1,000 FNPT 1.20 lbs 91.200.006 11 4 1,000 FNPT 1.90 lbs 91.200.007 11 2 1,000 FNPT 2.30 lbs 91.200.008 2 1,000 FNPT 3.35 lbs 91.200.009 21 2 1,000 FNPT 6.35 lbs 91.200.010 3 1,000 FNPT 10.7 lbs Part# Size PSI Thread 91.000.001 1/4 600 FNPT 0.58 lbs 91.000.002 3/8 600 FNPT 0.54 lbs 91.000.003 1/2 600 FNPT 0.72 lbs 91.000.004 3/4 600 FNPT 1.12 lbs 91.000.005 1 600 FNPT 1.16 lbs 91.000.006 11 4 600 FNPT 2.21 lbs 91.000.007 11 2 600 FNPT 2.76 lbs 91.000.008 2 600 FNPT 5.14 lbs 91.000.010 3 600 FNPT 9.90 lbs BALL VALVES, BLACK CARBON STEEL Part# Size PSI Thread 91.300.001 1/4 2,000 FNPT 0.17 lbs 91.300.002 3/8 2,000 FNPT 0.16 lbs 91.300.003 1/2 2,000 FNPT 0.64 lbs 91.300.004 3/4 2,000 FNPT 1.02 lbs 91.300.005 1 2,000 FNPT 2.00 lbs 91.300.006 11 4 2,000 FNPT 3.10 lbs 91.300.007 11 2 2,000 FNPT 5.40 lbs 91.300.008 2 2,000 FNPT 8.30 lbs

BALL VALVES 117 PACKAGING: Packaged BALL VALVES, STEEL Full port Steel ball valve. BALL VALVES, MINI CHROME Part# 85.300.046 7,000 PSI Thread 3/8 FNPT Material Steel 1.6 lbs BALL VALVES, STAINLESS STEEL Full port Stainless Steel ball valve. Part# Size PSI Thread 91.400.001 200 FNPT x FNPT 91.401.001 200 FNPT x MNPT 91.400.002 200 FNPT x FNPT 91.401.002 200 FNPT x MNPT 91.400.003 200 FNPT x FNPT 91.401.003 200 FNPT x MNPT BALL VALVES, T-HANDLE, MINI CHROME Part# Thread Material 85.300.046S 7,000 PSI 3/8 FNPT Stainless Steel 1.6 lbs BALL VALVES, NOZZLE Nozzle Part# 91.900.056 Fitting FNPT x M Material Brass 0.18 lbs Body Cap Part# Size PSI Thread 91.400.101 200 FNPT x FNPT 91.401.101 200 FNPT x MNPT 91.400.102 200 FNPT x FNPT 91.401.102 200 FNPT x MNPT 91.400.103 200 FNPT x FNPT 91.401.103 200 FNPT x MNPT

118 VALVES PACKAGING: Packaged GATE VALVE, BRASS PULSATION DAMPENER Mounts to the outlet of the pump to prolong the life of the pump and system. Part# Size PSI Thread 92.000.003 1/2 200 FNPT 0.52 lbs 92.000.004 3/4 200 FNPT 0.72 lbs 92.000.005 1 200 FNPT 0.93 lbs 92.000.006 11 4 200 FNPT 1.50 lbs 92.000.007 11 2 200 FNPT 1.85 lbs 92.000.008 2 200 FNPT 2.82 lbs 92.000.009 21 2 200 FNPT 5.18 lbs 92.000.010 3 200 FNPT 7.50 lbs 92.000.012 4 200 FNPT 11.9 lbs Part# 85.300.047 3,100 PSI Max Temperature 180 F Pre-charge Pressure 580 PSI Thread 3/8 FNPT Volume 0.16 Litre 1.82 lbs

VALVES 119 PACKAGING: Packaged EZ-START VALVE THERMAL VALVE Part# 85.300.035 3/8 MNPT Outlet 1/4 Hose Barb 0.3 lbs JETTER VALVE Installs onto the pump head to allow a pressure washer to have pulsating pressure for drain cleaning. Part# 85.300.022 1/4 MNPT Part# 85.300.023 3/8 MNPT Part# 85.300.024 1/2 MNPT 200 PSI Max Temperature 145 F Max Flow 2-5 GPM 0.3 lbs SAFETY RELIEF VALVE Part# Pump 85.400.119 3,000 PSI LWDK 0.55 lbs 85.400.219 3,500 PSI HW/ZWD 0.90 lbs 85.400.319 3,600 PSI TW 0.90 lbs Part# 85.300.042 6,000 PSI Max Temperature 195 F Max Flow 6 GPM 3/8 MNPT 0.3 lbs

120 COUPLERS & O-RINGS PACKAGING: Packaged NOZZLE COUPLER O-RINGS HOSE COUPLER O-RINGS 1/2 COUPLER O-RINGS Part# Size Type Water Qty 85.309.102 1 4 EPDM Cold 1 85.309.102V 1 4 Viton Hot 1 85.309.102C 1 4 EPDM Cold 100 85.309.102VC 1 4 Viton Hot 100 Part# Size Type Water Qty 85.309.103 3/8 EPDM Cold 1 85.309.103V 3/8 Viton Hot 1 85.309.103C 3/8 EPDM Cold 100 85.309.103VC 3/8 Viton Hot 100 Part# Size Type Water Qty 85.309.153V 1/2 Viton Hot 1 EZ-GRIP COUPLERS, QUICK CONNECT, FNPT The EZ-Grip coupler is ideal for hot water applications. It offers protection when the coupler is hot and a steady grip that won t slip easily. EZ-GRIP COUPLERS, QUICK CONNECT, MNPT The EZ-Grip coupler is ideal for hot water applications. It offers protection when the coupler is hot and a steady grip that won t slip easily. EZ-GRIP! Part# Material Size 85.300.192 Brass 1/4 0.15 lbs 85.300.193 Brass 3/8 0.25 lbs EZ-GRIP! Part# Material Size 85.300.197 Brass 1/4 0.15 lbs 85.300.198 Brass 3/ 8 0.25 lbs SURE-LOCK COUPLERS, QUICK CONNECT FNPT SURE-LOCK COUPLERS, QUICK CONNECT MNPT Part# Material Size 85.300.183 Brass 1/8 0.15 lbs 85.300.102 Brass 1/4 0.15 lbs 85.300.103 Brass 3/8 0.20 lbs 85.300.153 Brass 1/2 0.20 lbs Part# Material Size 85.300.187 Brass 1/8 0.15 lbs 85.300.107 Brass 1/4 0.15 lbs 85.300.108 Brass 3/8 0.20 lbs 85.300.152 Brass 1/2 0.20 lbs COUPLERS, QUICK CONNECT FNPT COUPLERS, QUICK CONNECT MNPT Part# Material Size 85.300.102S Stainless Steel 1/4 0.15 lbs 85.300.114 Brass/Stainless Steel Sleeve 1/4 0.15 lbs 85.300.103S Stainless Steel 3/8 0.20 lbs 85.300.115 Brass/Stainless Steel Sleeve 3/8 0.20 lbs 85.300.153S Stainless Steel 1/2 0.20 lbs Part# Material Size 85.300.107S Stainless Steel 1/4 0.15 lbs 85.300.116 Brass/Stainless Steel Sleeve 1/4 0.15 lbs 85.300.108S Stainless Steel 3/8 0.20 lbs 85.300.117 Brass/Stainless Steel Sleeve 3/8 0.20 lbs 85.300.152S Stainless Steel 1/2 0.20 lbs

COUPLERS AND PLUGS 121 PACKAGING: Packaged COUPLER, 3 O-RING SEAL, STAINLESS STEEL PLUGS, STAINLESS STEEL Part# Material Thread Seal 85.300.155S Stainless Steel 1/2 QC x 3/8 FNPT 3 O-Rings 5,000 PSI 0.35 lbs Part# Material Thread 85.300.154S Stainless Steel 1/2 QD x 3/8 FNPT 5,000 PSI 0.12 lbs PLUGS, FNPT PLUGS, MNPT Part# Material Size 85.300.181H Hardened Steel 1/8 0.20 lbs 85.300.101S Stainless Steel 1/4 0.05 lbs 85.300.101H Hardened Steel 1/4 0.05 lbs 85.300.101 Plated Steel 1/4 0.05 lbs 85.300.104S Stainless Steel 3/8 0.10 lbs 85.300.104H Hardened Steel 3/8 0.10 lbs 85.300.104 Plated Steel 3/8 0.10 lbs 85.300.151 Plated Steel 1/2 0.15 lbs 85.300.151S Stainless Steel 1/2 0.15 lbs Part# Material Size 85.300.185H Hardened Steel 1/8 0.35 lbs 85.300.109S Stainless Steel 1/4 0.05 lbs 85.300.109H Hardened Steel 1/4 0.05 lbs 85.300.109 Plated Steel 1/4 0.05 lbs 85.300.105S Stainless Steel 3/8 0.10 lbs 85.300.105H Hardened Steel 3/8 0.10 lbs 85.300.105 Plated Steel 3/8 0.10 lbs 85.300.150 Plated Steel 1/2 0.15 lbs 85.300.150S Stainless Steel 1/2 0.15 lbs PLUG, ALUMINUM WAND SAVER COUPLER, ALUMINUM WAND SAVER SWIVEL, STAINLESS STEEL Part# 85.300.161 Pressure 5,000 PSI Material Stainless Steel Size 1/4 FNPT 0.1 lbs Part# 85.300.162 Pressure 4,000 PSI Material Brass/Stainless Steel Sleeve Size 1/4 FNPT 0.1 lbs Part# 85.300.112 3/8 Part# 85.300.113 1/4 Pressure 5,000 PSI Temperature 200 F 0.22 lbs

122 SCREW-TYPE FITTINGS PACKAGING: Packaged SWIVEL, BRASS SCREW-TYPE, MNPT Fits Karcher. SCREW-TYPE, FNPT Fits Karcher. Part# 85.300.110 3/8 Part# 85.300.111 1/4 Pressure 4,000 PSI Temperature 200 F 0.22 lbs Part# 85.300.133 3/8 Part# 85.300.132 1/4 Pressure 4,000 PSI MNPT Thread M22 x 11 2 0.1 lbs Part# 85.300.127 3/8 Part# 85.300.126 1/4 Pressure 4,000 PSI FNPT Thread M22 x 11 2 0.1 lbs SCREW-TYPE, Q CONNECT MNPT Insulated Knob, Fits Karcher. SCREW-TYPE, Q CONNECT FNPT Insulated Knob, Fits Karcher. M22 PLUG, STEEL Insulated Knob. Part# 85.300.136 3/8 Part# 85.300.135 1/4 MNPT Thread M22 x 11 2 0.18 lbs Part# 85.300.125 3/8 Part# 85.300.124 1/4 FNPT Thread M22 x 11 2 0.18 lbs Part# 85.300.142 Size M22 x 3/8 quick connect Material Steel 0.2 lbs M22 X M22, FNPT Insulated Knob. Part# 85.300.146 Size M22F x M22F 0.1 lbs

GARDEN HOSE AND NOZZLE FITTINGS 123 PACKAGING: Packaged PLUG, GARDEN HOSE MNPT PLUG, BSP HOSE FEMALE COUPLER, GARDEN HOSE FEMALE Part# 85.300.137 Size 3/4 MGHT x 1/2 Plug 0.1 lbs Part# 85.300.147 Size 3/4 FBSP x 1/2 Plug 0.1 lbs Part# 85.300.138 Size 3/4 FGHT x 1/2 Coupler Material Brass 0.14 lbs M20, GARDEN HOSE ADAPTER, GARDEN HOSE HEX Full Assembly. ADAPTER, GARDEN HOSE HEX Full Assembly. Part# 85.300.141 Size 3/4 FGHT x M20 Material Brass 0.16 lbs Part# 85.300.119 3/8 MNPT Part# 85.300.120 1/2 MNPT 3/4 FGHT Spring/Filter Stainless Mesh #60 Material Brass 0.4 lbs Part# 85.300.128 3/8 MNPT Part# 85.300.131 1/2 MNPT 3/4 FGHT Port 1/4 FNPT Spring/Filter Stainless Mesh #60 Material Brass 0.44 lbs GARDEN CONNECTION Fits gardena-type fittings. Part# 85.300.164 Size 3/4 MGHT x Garden Type Plug Material Plastic

SECTION 7 KITS AND CUSTOM ACCESSORIES 125 KITS AND CUSTOM ACCESSORIES Hose Reels 126 Engine Parts 128 Sandblast Kits 129 Power Accessories 130 Fluid Accessories 131 Chemical Injectors & Kits 132 Brushes and Kits 134 Gutter Cleaners & Accessory Kits 135 Pressure Gauges 136 Filters and Strainers 137 Miscellaneous Water Accessories 138 Garden Hose Accessories 139 Garden Spray Guns 140 Garden Hose 141 Electrical Accessories 142 Replacement Blocks and Feet 143 Tires, Wheels, & Parts Bins 144

126 HOSE REELS PACKAGING: Packaged HOSE REEL, 400 & 200 FT. HOSE REEL, 200 & 100 FT. Part# 85.401.040 85.401.020 3,000 PSI 3,000 PSI Max Temperature 160 F 160 F Hose Size 3/8 3/8 Hose Capacity 400 ft. 200 ft. Dimensions 19.5 x13 x19.5 19.5 x13 x9.5 21.7 lbs 21.7 lbs REPLACEMENT PARTS Part# Swivel 85.401.100 HOSE REEL, 75 & 50 FT. Part# 85.402.002 85.402.001 3,000 PSI 3,000 PSI Max Temperature 160 F 160 F Hose Size 3/8 3/8 Hose Capacity 200 ft. 100 ft. Dimensions 20 x15.75 x17.25 17 x18 x13.5 18 lbs 16 lbs REPLACEMENT PARTS Part# Swivel 85.402.005 Black Handle 85.402.007 Swivel Repair Kit 85.402.009 HOSE REEL, PRESSURE WASHER CONVERSION Order the following components to convert an 85.402.000 or an 85.402.050 hose reel for use with a pressure washer. To convert the 85.402.002 or 85.402.001 an additional 85.713.006 bushing must be ordered. Part# 85.402.000 85.402.050 3,000 PSI 3,000 PSI Max Temperature 160 F 160 F Hose Size 3/8 3/8 Hose Capacity 75 ft. 50 ft. Dimensions 13 x18 x11 13 x11.75 x11 12 lbs 11 lbs Part# Description REPLACEMENT PARTS Part# Swivel (for 85.402.000) 85.402.004 Swivel (for 85.402.050) 85.402.005 Black Handle 85.402.007 Swivel Repair Kit 85.402.009 85.238.022 30 Bypass Hose 85.300.104 3/8 FNPT Steel Plug 85.713.006 3/8 x 3/8 FNPT Bushing (required to convert 85.402.002 or 85.402.001 only) 85.704.001 45 Elbow, 3/8 NPT, (optional) Hose reel sold separately.

HOSE REELS 127 PACKAGING: Packaged 200FT STAINLESS STEEL HOSE REEL Durable Stainless Steel Construction. Easy-Grip handle with solid construction. Strong locking device to secure hose reel in place. Stainless Steel swivel. STAINLESS STEEL HOSE REEL Part# 85.402.002S 4,000 PSI Max Temperature 160 F Hose Size 3/8 Hose Capacity 200 ft. Dimensions 20 x15.75 x17.25 16 lbs AVAILABLE LATE SPRING 2007!

128 ENGINE PARTS PACKAGING: Packaged REPLACEMENT AIR FILTER, GX ENGINE REPLACEMENT AIR FILTER, GX ENGINE Part# 85.550.002 Replacement for 17210-ZE1-517 filter Engine GX 160, 5.5HP Engine GX 200, 6.5HP 0.3 lbs Part# 85.550.003 Replacement for 17210-ZE2-505 filter Engine GX 240, 8HP Engine GX 270, 9HP 0.3 lbs REPLACEMENT AIR FILTER, GX ENGINE REPLACEMENT SPARK PLUGS, (RESISTOR STYLE) Part# Plug# Engine 85.519.001 BPR6ES GC and GX, 4-13HP Replacement for BPR6ES Spark plug Part# 85.550.004 Replacement for 17210-ZE3-505 filter Engine GX 340, 11HP Engine GX 390, 13HP 0.3 lbs OIL DIPSTICK GAS CAP Replacement cap for all GX engines. Part# For Models 15600-735-003 9-11 HP (GX260-GX390) 15600-ZE1-003 4-6.5 HP (GC135-GX200) Part# 17620-ZE2-W00 0.18 lbs

SANDBLAST KITS 129 PACKAGING: Packaged SANDBLASTER, HEAVY DUTY WET Please note, 0 Meg nozzle (85.200. ) is not included. SANDBLASTER, KIT Part# 9001-9 5,500 PSI Max Flow 10 GPM Min Flow 3 GPM 9.25 lbs COMPONENTS Part# Nozzle 10TCSS5BE Probe 9050-9 Head 9051-9C 3/4 Hose (25 required) G941K-075 Hose Clamp HS-8 1/4 Plug 85.300.107 MEG NOZZLE REQUIRED FOR USE! SEE MEG NOZZLES ON PAGE 105. Part# 85.400.002 3,500 PSI Max Flow 10 GPM 9.25 lbs COMPONENTS Part# Head 85.400.009 1/2 Hose (20 required) 85.202.071 Tube 85.400.010 Male Plug 85.300.101 Nozzle 124700000 AVAILABLE SEPARATELY Part# Nozzle (1.2 diameter) 124720310 Nozzle (1.4 diameter) 124720320

130 MISCELLANEOUS ACCESSORIES PACKAGING: Packaged BATTERY, PRESSURE WASHER Call us for information on shipping regulations. Comes without acid and needs to be charged prior to use. SOAP HOLDER Affixes to the frame to conveniently hold a 1 gallon soap container in place. Sample. Part# 85.603.002 Voltage 12V Col Cranking Amps 240A Ampere Hours 19A Terminal LUG Dimensions 7 x 4 x 6 10 lbs Part# 85.601.010 1.15 lbs TAPE, TEFLON SEALANT Part# 85.400.110 Size W1/2 x L480 Number per Box 12 0.4 lbs Part# Volume L24243 250 ml

FLUID ACCESSORIES 131 PACKAGING: Packaged SOAP DETERGENT CAR WASH All detergents sold in boxes of 4 HOUSE & SIDING DECK & FENCE HEAVY DUTY Detergents sold in boxes of 4 Detergents sold in boxes of 4 Detergents sold in boxes of 4 Detergents sold in boxes of 4 Part# 85.490.050 Volume 3.78L/1Gallon 9 lbs Part# 85.490.051 Volume 3.78L/1Gallon 9 lbs Part# 85.490.052 Volume 3.78L/1Gallon 9 lbs Part# 85.490.053 Volume 3.78L/1Gallon 9 lbs SOAP DETERGENT, MULTI-PACK Contains 1 of each detergent type shown above. SOAP DETERGENT, 5 GALLON JUGS Sold Individually. Part# 85.490.054 Volume 3.78L/1Gallon 9 lbs Part# Type Volume 85.490.055 Car Wash 18.92L/5Gallon 45 lbs 85.490.056 House & Siding 18.92L/5Gallon 45 lbs 85.490.057 Deck & Fence 18.92L/5Gallon 45 lbs 85.490.058 Heavy Duty 18.92L/5Gallon 45 lbs PUMP ANTI-FREEZE SOLUTION Protect your pump from freezing over the winter. Attaches to any pump inlet to fill pump chamber with anti-freeze solution. Twist on and depress button. PUMP OIL Ideal for high pressure pumps. Non detergent and non foaming. Specially formulated and rated for superior rust protection and oxidation protection. Not for use in engine. Note: Change oil after the first 50 hours of operation, then every 500 hours or as needed. Fill oil half-way on the indicator site glass only. Do not over-fill. Fill oil half-way. Part# Description Volume 85.490.042 BE Label 6 oz. 85.490.041 Generic Label 6 oz. Part# Volume 85.490.006B 1/2 Litre 0.5 lbs 85.490.000 1 Litre 1 lbs 85.490.000 is boxed in a case of 12.

132 CHEMICAL INJECTORS PACKAGING: Packaged ADJUSTABLE CHEMICAL INJECTOR ADJUSTABLE CHEMICAL INJECTOR Part# 85.300.092 4,000 PSI Max Temperature 145 F Max Flow 3-5 GPM 3/8 quick connect plug Outlet 3/8 quick connect coupler Material Brass 0.35 lbs Part# 85.300.090 MNPT Part# 85.300.091 FNPT/MNPT 200 PSI Max Temperature 145 F Max Flow 2-5 GPM 3/8 MNPT or 3/8 FNPT Outlet 3/8 MNPT 0.3 lbs ADJUSTABLE CHEMICAL INJECTOR Adjustable high draw chemical injector draws up to 20% chemical. Part# 85.300.093 2-3 GPM Part# 85.300.094 3-5 GPM Part# 85.300.095 5-8 GPM 4500 PSI Max Temperature 195 F 3/8 MNPT Outlet 3/8 MNPT Material Brass 0.3 lbs

CHEMICAL KITS AND PARTS 133 PACKAGING: Packaged CHEMICAL HOSE ASSEMBLY Includes hose and suction filter. Available in 3, 4, and 6 foot lengths. FILTERS, CHEMICAL SUCTION Filters out abrasives found in chemicals and cleaning agents. Check valve prevents back flow. A B C D Part# Length 85.400.005 3 ft. 0.1 lbs 85.400.013 4 ft. 0.1 lbs 85.400.006 6 ft. 0.1 lbs Part# Outlet Check Valve A 85.300.050 1/4 hose barb No 0.01 lbs B 85.300.052 1/4 hose barb No 0.01 lbs C 85.300.051 1/4 hose barb Yes 0.01 lbs D 85.300.053 1/4 hose barb Yes 0.01 lbs CHEMICAL KIT, HIGH PRESSURE Placed on the inlet side of pump. Used to provide soap discharge at pressure washer s Maximum Pressure. CHEMICAL KIT, LOW PRESSURE Placed on the outlet side. Unique siphoning design draws chemicals or soap to aid in your cleaning flexibility. Be sure to use the black low pressure nozzle and open the adjusting knob on the injector when in use. Part# 85.400.003 3,500 PSI Max Temperature 180 F Max Flow 8 GPM 1.05 lbs COMPONENTS Part# Soaper Body Assembly 7655 3/4 FGHT x 3/8 MNPT 85.300.119 3/4 FGHT x 1/2 FNPT 85.300.130 Soaper Hose Assembly 85.400.005 Brass Adapter 1/2 x 3/8 MNPT 85.706.086 Part# 85.400.001 Flow 3-5 GPM 1.05 lbs COMPONENTS Part# Soap Hose Assembly 85.400.005 Soaper Body Assembly 85.300.092 9 Body Kit Quick Connect 85.300.096 9 Injector Barb Assembly 0203100020

134 BRUSHES PACKAGING: Packaged NYLON BRUSH Use quick connect plug 85.300.101 to quickly connect the brush to the end of a lance. NYLON BRUSH, ROTATING Provides low pressure scrubbing action. Part# 85.400.011 3000 PSI Max Temperature 140 F 1/4 Male MNPT 1.7 lbs Part# 85.400.008 2,000 PSI Max Temperature 140 F 1/4 QC plug or Male M22 1.15 lbs NYLON BRUSH, FIXED CAR WASH BRUSH Lightweight telescoping car wash brush extends up to 6 1/2 feet. Part# 85.400.040 3,000 PSI Max Temperature 140 F Female M22 0.4 lbs Part# 85.400.043 Length up to 6 1/2 Ft 3/4 FGHT

GUTTER CLEANERS & ACCESSORY KITS 135 PACKAGING: Packaged GUTTER CLEANER KIT Turns wands into efficient gutter cleaners so that gutters can be cleaned from the ground. GUTTER CLEANERS Turns wands into efficient gutter cleaners so that gutters can be cleaned from the ground. Part# 85.400.032 3,000 PSI Outlet 1/4 quick connect M22 Male 0.90 lbs Part# 85.400.033 85.400.007 3,000 PSI 3,000 PSI Outlet 1/4 quick connect 1/4 quick connect Male M22 1/4 plug 0.60 lbs 0.55 lbs MULTI-ACCESSORY KIT The accessories available in this kit can handle a variety of cleaning applications. It includes a turbo lance, fixed brush, rotating brush, sandblast kit, snake hose cleaner, 6M long garden hose, garden tap connector, and HPC connector. The accessory kit is easy to carry and easy to store. REPLACEMENT FITTING KIT These kits contain replacement nozzles and fittings. There are two kits, one with a set of #3.0/3.5 nozzles, and one with #3.5/4.0. Each kit contains the following: Two Sizes of 0,15, 25, & 40 Nozzles 1/4 & 3/8 FNPT EZ-Grip Couplers 3/8 FNPT Plug 3/8 MNPT Plug 3/8 MNPT x 3/4 FGHT Garden Hose Adapter Garden Hose Washer & Filter Two 3/8 FNPT Screw-Type Fittings Ten 3/8 O-Rings Ten 1/4 O-Rings Part# 85.400.046 1,700 PSI 10.15 lbs Part# 85.400.024 # 3.0 & 3.5 Size Part# 85.400.027 # 3.5 & 4.0 Size 2.1 lbs

136 PRESSURE GAUGES PACKAGING: Packaged 2.5 PRESSURE GAUGE, GLYCERIN, STAINLESS STEEL Install on outlet of pump to measure system performance. Do not cut the plastic tip when using the pressure gauge. 4 PRESSURE GAUGE, GLYCERIN, STAINLESS STEEL Install on outlet of pump to measure system performance. Part# Max PSI Size 85.300.100 100 PSI 1/4 MNPT 2.5 0.45 lbs 85.300.200 200 PSI 1/4 MNPT 2.5 0.45 lbs 85.300.300 300 PSI 1/4 MNPT 2.5 0.45 lbs 85.300.600 600 PSI 1/4 MNPT 2.5 0.45 lbs 85.301.000 1,000 PSI 1/4 MNPT 2.5 0.45 lbs 85.302.000 2,000 PSI 1/4 MNPT 2.5 0.45 lbs 85.303.000 3,000 PSI 1/4 MNPT 2.5 0.45 lbs 85.305.000 5,000 PSI 1/4 MNPT 2.5 0.45 lbs Part# 84.000.100 100 PSI Size 4 1/4 MNPT 1.05 lbs 2.5 PRESSURE GAUGE KIT, QUICK-CONNECT Easy quick connect setup installs on outlet of pump to measure system performance. THROTTLE CONTROL KIT Throttles down your engine in a no-load by-pass to prolong the engine and pumps life, also reduces fuel consumption. Part# 85.305.001 5,000 PSI Size 2.5 3/8 quick connect plug Outlet 3/8 quick connect coupler 0.8 lbs COMPONENTS Part# 5,000 PSI Gauge 85.305.000 Quick Connect Fitting with 85.300.106 Stainless Steel Sleeve Part# 85.400.114 4,000 PSI Max Temperature 145 F Cable Length 42 3/8 MNPT Actuation Pressure 1,000 PSI 1.15 lbs

FILTERS AND STRAINERS 137 PACKAGING: Packaged FILTER, WATER INLET Protects the pump from contaminants in the water. Cap easily unscrews with a spanner wrench to change filter. FILTER, WATER INLET Protects the pump from contaminants in the water. Cap easily unscrews with an Allen Key to clean out screen. Part# 85.300.059 / Outlet 1/2 FNPT 2.85 lbs REPLACEMENTS Part# Filter Cartridge SP5-25 Part# 85.300.058 170 PSI Max Temperature 180 F Max Flow 10 GPM 3/4 FGHT Outlet 1/2 MNPT Ports Dual 1/4 FNPT with Plugs 0.55 lbs COMPONENTS Part# 1 Stainless Steel Screen #50 85.309.050 Housing with 1/4 Male Plugs 85.309.046 Plastic Blue Cap 85.309.051 Garden Hose Adapter (3/4 FGHT) 85.300.120 FILTER, WATER INLET FILTER, WATER INLET Part# 85.300.055 Max Temperature 175 F Max Flow 8 GPM 3/4 FGHT Outlet 1/2 MNPT 0.5 lbs REPLACEMENTS Part# O-ring 85.309.055 Clearbowl 85.309.054 Part# 85.300.054 Part# 85.300.064 Max Temperature Max Flow Outlet 1/2 MNPT Outlet 1/2 BSP Outlet ( GP Pumps) 175 F 8 GPM 3/4 FGHT 1/2 MNPT or 1/2 BSP 0.5 lbs REPLACEMENTS Part# O-ring 85.309.055 Clearbowl 85.309.054

138 MISCELLANEOUS WATER ACCESSORIES PACKAGING: Packaged STRAINER, INLET Protects the system from contaminants in the water. FILTER, INLINE HIGH PRESSURE Protects the system from contaminants in the water. Part# 95.000.003 1/2 Part# 95.000.004 3/4 175 PSI Max Flow 16 GPM /Outlet FNPT Screen #50 0.3 lbs Part# 85.211.007 Quick Connect Part# 85.211.006 FNPT 5,500 PSI Max Temperature 200 F Max Flow 8 GPM 1/4 FNPT or Quick Connect Outlet 1/4 MNPT 0.23 lbs WASHER, FILTER WASHER, GARDEN HOSE Part# 85.308.120 Dimensions 1 OD Screen #60 0.005 lbs Part# 85.308.121 Dimensions 1 OD 0.005 lbs

GARDEN HOSE ACCESSORIES 139 PACKAGING: Packaged VALVE, GARDEN HOSE SHUTOFF VALVE, GARDEN HOSE SHUTOFF Part# Outlet Material GHV-2 60 PSI 3/4 FGHT 2 x 3/4 MGHT Plastic 0.1 lbs Part# Outlet Material GHV-1 60 PSI 3/4 FGHT 3/4 MGHT Plastic 0.1 lbs VALVE, GARDEN HOSE SHUTOFF VALVE, GARDEN HOSE SHUTOFF Part# 91.900.075 100 PSI 3/4 FGHT Outlet 3/4 MGHT Material Brass 0.5 lbs Part# 91.900.074 100 PSI 3/4 FGHT Outlet 3/4 MGHT Material Brass 0.25 lbs VALVE, GARDEN HOSE SHUTOFF VALVE, GARDEN HOSE SHUTOFF Metal Impulse Sprinkler 2-way Spike Garden Hose Connection Adjustable Spray Area Part# 91.900.073 100 PSI 3/4 FGHT Outlet 2 x 3/4 MGHT Material Brass 0.5 lbs Part# 90.300.020 0.8 lbs

140 GARDEN HOSE ACCESSORIES PACKAGING: Packaged GARDEN HOSE SPRAY GUN Premium garden hose gun, with adjustable brass tip with brass plunger and nut. Zinc alloy body and comfortable soft grip. GARDEN HOSE SPRAY GUN Premium garden hose gun, with adjustable brass tip and eight function spray head. Zinc alloy body and comfortable soft grip. Part# 90.300.010 3/4 FGHT Connection Packaging Carded for convenient display 0.8 lbs Part# 90.300.011 3/4 FGHT Connection Packaging Carded for convenient display 0.8 lbs GARDEN HOSE NOZZLE Garden hose nozzle, with adjustable brass tip, insulated rubber grip, and twist operation from cone to stream. LOW PRESSURE SPRAY GUN Optional Swivel 23.1502.34 Part# 90.300.012 3/4 FGHT Connection 0.3 lbs Part# 85.205.019 350 PSI Max Temperature 195 F Max Flow 16 GPM 3/4 FGHT 2 lbs Optional Swivel 23.1502.34

GARDEN HOSE ACCESSORIES 141 PACKAGING: Packaged PREMIUM THERMOPLASTIC GARDEN HOSE Premium blue hose resists kinking and is made of thermoplastic material, a blend of rubber & PVC, with solid brass ends. Specifications Max PSI 145 Wall Thickness 3.75 mm Part# Diameter Length 90.358.050 5/8 50 Ft 9.6 lbs 90.358.100 5/8 100 Ft 13.7 lbs 90.375.050 3/4 50 Ft 11.4 lbs 90.375.100 3/4 100 Ft 26.7 lbs PREMIUM PVC GARDEN HOSE Premium yellow hose made of a PVC blend material, with solid brass ends. Specifications Max PSI 145 Wall Thickness 2.5 mm Part# Diameter Length 90.050.050 1/2 50 Ft 5.25 lbs 90.058.050 5/8 50 Ft 6.75 lbs 90.058.100 5/8 50 Ft 13.7 lbs

142 ELECTRICAL ACCESSORIES PACKAGING: Packaged PRESSURE SWITCH, 3 WIRE Mounts on the inlet side. Protects system by shutting off burner at a preset temperature. 3 wire allows for normally open or normally closed. Not rated for inductive loads. Must be installed by an electrician to avoid electric shock. THERMOSTAT, WITH IMMERSED PROBE Provides accurate temperature control to shut down burner and protect system. Part# 85.300.082 4,100 PSI Max Temperature 195 F Activated Pressure 580 PSI 1/4 MNPT Voltage 250V Amperes 15A 0.6 lbs Part# 85.400.070 4,000 PSI Max Temperature 300 F Coil Length 59 Probe 4 1/4 Amperes 15A 0.3 lbs VACUUM SWITCH Mount on inlet side. When water flows the burner starts. When flow ceases it shuts off burner. TACHOMETER/ HOUR METER Easily attaches to the engine with no wiring required. Comes with service notification. Part# 85.300.080 Size 3.5 Voltage 250V Amperes 16A Max Temperature 140 F 1.25 lbs Part# 806-109 0.1 lbs

REPLACEMENT BLOCKS AND FEET 143 PACKAGING: Packaged TAP, WITH FLOAT Protects pump by maintaining a constant flow by monitoring water level in a reservoir. Economical and low maintenance. FLOW SWITCH, 3 WIRE Part# 85.300.070 145 PSI Max Temperature 140 F 3/4 BSP Material Brass 0.55 lbs Part# 85.300.014 3,650 PSI Max Temperature 175 F Max Flow 8 GPM 3/8 BSP Outlet 3/8 BSP 0.6 lbs MOUNTING BLOCK RUBBER FOOT, MOULDED Part# 85.603.018 Brass Part# 85.603.016 Aluminum /Outlet 3/8 MNPT 1.66 lbs Part# 85.660.005 Bolt Dimensions M8 x 55 0.85 lbs RUBBER FOOT RUBBER GROMMET Mounts on frame to hold nozzles. Part# 85.660.007 Bolt Dimensions M8 x 45 0.3 lbs Part# 85.660.008

144 TIRES AND WHEELS PACKAGING: Packaged TIRES, TUBED PNEUMATIC WHEEL ASSEMBLY, 13 TIRES, TUBED PNEUMATIC WHEEL ASSEMBLY, 10 Also Available in 5/8 bearing. Ball Bearing Ball Bearing Nylon Bushing Nylon Bushing Part# 85.660.006 Nylon Bushing Part# 85.660.006B Ball Bearing Tire Pressure 40 PSI Max. Size 13.0 x 5.00-6.00 Type 2 ply rating Bearing 3 4 x 2 1 4 5.6 lbs Part# 85.660.004 Nylon Bushing Part# 85.660.004B Ball Bearing Tire Pressure 30 PSI Max. Size 4.10 x 3.50-4.00 Type 2 ply rating Bearing 3 4 x 2 1 4 3.7 lbs TIRE, FOAM-FILLED, 10 TIRES WITH MAG, TUBED PNEUMATIC Part# 85.660.017 Description 10 Foam Filled Size 4.10 x 3.50-4.00 Bearing 3/4 x 2.25 Nylon Bushing 5.3 lbs Part# 85.660.032 85.660.033 Description 10 MAG Tire 13 MAG Tire Size 4.10 x 3.5-4.00 13.0 x 5.00-6.00 Bearing 3 4 Steel 3 4 Steel 4.15 lbs BLUE PLASTIC PARTS BINS ACCESSORY CASE 17 17 4 7 2.5 8.5 Part# Description 85.600.101 Parts Bin, 12L x 2.5W x 4H 0.3 lbs 85.600.102 Parts Bin, 17L x 8.5W x 7H 1.35 lbs Part# 85.600.103 0.7 lbs

146 WARRANTY TABLE WARRANTY OF POLICY CONTENTS POLICIES BE Pressure Supply s warranty procedure and policy is as follows: orders received with missing parts need to be reported within 48 hours. All warranty replacements require a BE Pressure Supply pre-approval before returning merchandise for warranty claim. Warranty claims without this pre-approval will not receive credit and any freight claims or damages must be reported within 48 hours. PROCEDURE 1. When a dealer encounters a warranty problem, call BE PRESSURE SUPPLY and ask for Customer Service. Please have your invoice # and/or unit serial # ready. 2. If a claim is going to be processed, a Return Goods Authorization (RGA) must be obtained before returning the product. 3. BE PRESSURE SUPPLY will confirm this Return Goods Authorization number with a faxed copy to the dealer. 4. This warranty part has to be returned within 30 days to BE PRESSURE SUPPLY together with the applicable BE invoice copies and a copy of the Pre-Approval. Without proof of purchase we are unable to proceed with Warranty. 5. Product being returned for warranty consideration is to be shipped prepaid freight. If warranty is approved, product will be returned prepaid freight. In the US, return via UPS Ground. In Canada, return via expedited mail. DO NOT RETURN ANYTHING COLLECT OR IT WILL BE REFUSED. Please write the Return Goods Authorization # on the outside of the package being shipped, along with including a copy of the RGA inside the package. 6. BE PRESSURE SUPPLY will review the warranty claim once the merchandise is received, and will advise the dealer either of a credit for the merchandise returned, or a rejection of the claim. If rejected, the product will be repaired, billed to the dealer s account, and then returned to dealer. WARRANTY PERIODS 1. All pumps carry a 5 year warranty against manufacturer s defect, except for the Comet AXD,GXD, BXD, Cat DX, & AR SJV which carry a 2 year warranty and the Comet VRX carries a 1 year warranty. Note that this warranty only applies to defective manufacturer s workmanship as determined by the applicable manufacturer. This warranty does not apply where customer neglect, abuse, or normal wear and tear is involved. Items such as seal and valve kits are not warrantable. Pumps and gearboxes have a 12 month warranty against normal use when not commercially used. When commercially used, the warranty period is 90 days. ** BE Pressure Supply does not pay for labor. 2. Engine warranties are as per manufacturer s warranty policy in the engine owner operator s manual. 3. All other accessories and components, including Whirl-a- Ways and Long Wands, are warrantable for 90 days against manufacturer s defects. Whirl-A-Way heads are warrantable for 6 months. Rotary nozzles are warrantable for repair only for 30 days from purchase. POLICY The foregoing warranty is exclusive and in lieu of all other conditions or warranties, whether written, oral or implied (including any warranty of merchantability or fitness for purpose). If it appears, within the specified warranty period, from the date of delivery by the Dealer to the ultimate Purchase, that the goods do not meet the warranty period, all such liability shall terminate. This warranty does not cover depreciation or damage caused by normal wear, accident, improper maintenance, improper protection in storage, or improper use. The cost of normal maintenance and normal replacement of service items such as belts, lubricant or oils are the Customer s responsibility. Warranty as set forth in the preceding paragraphs shall not apply to supplier equipment such as engines or electric motors, such being subject to the warranty of their own respective manufacturers. Take them to your nearest warranty depot. The foregoing shall constitute the sole remedy of the Dealer and the sole liability of BE PRESSURE SUPPLY. RETURN POLICY FOR PARTS IN BE CATALOG 1) All parts in original new condition in BE catalog are returnable, with proof of purchase, up to one year. 2) All returns are subject to a 15% restocking charge. 3) All returns are to be freight prepaid. NO EXCEPTIONS. OEM RETURN POLICY 1) All special order items are 100% non-returnable. LIMITATION OF LIABILITY Subject to government regulations, BE PRESSURE SUPPLY liability of any claim, of any kind, including negligence for any loss or damages arising out of, connected with, or resulting from the order, or from the performance or breach thereof, or from the manufacture, sale, delivery, resale, repair, or use of any goods or parts covered by or furnished under an order, shall in no case exceed the price applicable to the goods or parts thereof which gives rise to the claim. In no event shall BE PRESSURE SUPPLY be liable for special or consequential damages, including downtime or labour resulting from damage.