HANDLING SYSTEMS
INDEX Handling Systems product range... 6 HAND PALLET TRUCKS GS PRO... 8 GS SPECIAL... 10 GS PREMIUM... 12 GS Mr HYDRO... 14 SCALES GS/P25 - GS/P25inox - PX20... 16 HIGH LIFT PALLET TRUCKS HX 10M... 18 HX 10E... 20 ELECTRIC PALLET TRUCKS CX 14... 22 QX 18 - QX 20... 24 QX 22... 26 STACKERS MX... 28 TX... 30 GX... 32 GX - TX STRADDLE... 34 FX... 36 LX... 38 LX 14 FREE LIFT... 40 Residual Lifting Capacity... 42 Special Solutions... 43
PRAMAC GROUP The PRAMAC Group was created from the merger of a group of commercial companies, all leaders in the handling and power sectors: Lifter, GMI, Laser, and Brookthompson. This merger brought together the best of these many companies under one logo, one name and one vision. PRAMAC is a young and dynamic company, flexible enough to adapt to the requirements of the market throughout constant development of all processes, from the planning to the production, from sales to purchasing in order to fully satisfy customer needs. The Group has diversified its presence in the market adopting a market-focused organisation shaped around its four Business Divisions: Handling Systems A complete range of professional and quality materials handling products: manual and electronic pallet trucks, scales, high lift pallet trucks and stackers. Power Systems A full range of petrol and diesel portable gensets, water pumps, electric welders and high pressure washers. Power Engineering Professional generators available as off the shelf solutions or as tailor made power generation solutions. Available for use in commercial business, large industrial plants, hospitals and sports centres. Power range available from 6 up to 2,500 kva. Service and Parts Pramac Parts and Service are able to offer customers a reliable and punctual after-sales service with reasonably priced original parts always available. PRAMAC s competitive and successful nature is highlighted in the PRAMAC Racing Team. The team has already proved successful on the world stage in previous years and will again be competing in the MOTO GP World Championship in 2006.
HANDLING SYSTEMS DIVISION Throughout this Division, PRAMAC Group offers a wide range of machines for handling and logistic applications: manual and electronic pallet trucks and stackers. PRAMAC s high quality production methods are characterised in these machines, using the best design solutions and materials available. The machines from this line are designed to satisfy every requirement and to exceed the highest standards in reliability due to the quality of the components used along with modern production techniques using advanced technology. During every stage of production, strict controls assure a high and constant quality level. At the end of each assembly line each machine is individually tested. If they pass the high standards, they are packed and stocked ready for their prompt delivery. 4
SAFETY AND QUALITY CONFORMS TO THE EUROPEAN SAFETY RULES The strategic objective to exceed the expectations of the customer can only be reached if the products are of the highest possible quality. The PRAMAC Group has taken this on in its philosophy in production. The continual improvement in the company processes, formulated with absolute respect for the environment and the specialised training of its staff, forms part of the Total Safety and Quality programme that the company sets itself. There is a real Safety and Quality Culture inside the company, starting from respect for the environment and regard for the specific regulations. Concrete evidence of this commitment is the certifications that the company has obtained on both the European level and extra-european level. SERVICE AND PARTS DIVISION Further to the objective of exceeding customer requirements, PRAMAC, with the creation of this Division, wanted to ensure the presence of reliable after-sales service and assistance always available to our clients. The Service and Parts Division are responsible for technical assistance and necessary immediate product replacement. Thanks to the organization, to its specialized skills and a worldwide network, PRAMAC Service and Parts is able to supply a professional and punctual service to meet any need through the availability of a professional service and wide range of spare parts and accessories always available. 5
HANDLING SYSTEMS PRODUCT RANGE GS PRO HAND PALLET TRUCKS Capacity (t): 2.5 HAND PALLET TRUCKS GS SPECIAL Capacity (t): 2.0-2.5 GS PREMIUM HAND PALLET TRUCKS Capacity (t): 2.5 HAND PALLET TRUCKS GS MR HYDRO Capacity (t): 2.5 GS/P25 - GS/P25stainless - PX20 SCALES GS/P, GS/P inox: Capacity (t): 2.5 PX20: Capacity (t): 2.0 HIGH LIFT PALLET TRUCKS HX 10M - HX 10E Capacity (t): 1.0 CX 14 ELECTRIC PALLET TRUCKS Capacity (t): 1.4 ELECTRIC PALLET TRUCKS QX 18 - QX 20 Capacity (t): 1.8-2.0 6
HANDLING SYSTEMS PRODUCT RANGE QX 22 ELECTRIC PALLET TRUCKS Capacity (t): 2.2 MANUAL STACKERS MX Capacity (t): 0.5-1.0 Max Elevation (m): 1.0 > 1.6 TX SEMIELECTRIC STACKERS Capacity (t): 1.0-1.2 Max Elevation (m): 0.9 > 3.5 ELECTRIC STACKERS GX Capacity (t): 1.0-1.2 Max Elevation (m): 0.9 > 3.5 GX - TX STRADDLE ELECTRIC STACKERS Capacity (t): 1.0-1.2 Max Elevation (m): 1.55 > 3.45 ELECTRIC STACKERS FX Capacity (t): 1.2 Max Elevation (m): 2.9 > 3.85 LX ELECTRIC STACKERS Capacity (t): 1.2-1.4-1.6 Max Elevation (m): 1.6 > 4.5 ELECTRIC STACKERS LX 14 FREE LIFT Capacity (t): 1.4 Full free lift (m): 1.6 Max Elevation (m): 4.5 7
HAND PALLET TRUCKS GS PRO Making the load lighter The GS Pro Series, is an excellent tool for lifting and carrying loads on pallets or size-standardised containers. Thanks to its light weight, smooth movement and manoeuvrability, all the GS Series models are an ideal working tool for use on smooth floors and other kinds of surfaces. New: capacity 2.5T 24 months warranty excluding wearing parts The nylon rollers guarantee safe and smooth rolling. The optional polyurethane rollers provide excellent silent movement, and prevent damage even to the most delicate floors. Rollers Painting The base, following conditioning, is painted with a tough epoxy coating at 250 C. This gives a high quality finish, and awards greater resistance to daily wear-and-tear, and atmospheric damage. The hand pallet trucks of this series have big wheels (200x50) to reduce handling effort. Wheels Maximum pressure valve When maximum load capacity is exceeded, the oil pressure exceeds its maximum limit and the valve automatically stops the forks from lifting. This prevents possible structural damage. 8
HAND PALLET TRUCKS GS PRO CODE GF541000 GFB41000 GF501000 GFB01000 GF511000 GFB11000 GF521000 GFB21000 GF561000 GFB61000 MODEL 25 S2 25 S4 25 S2 25 S4 25 S2 25 S4 25 S2 25 S4 25 S2 25 S4 CAPACITY kg 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 ROLLERS N /* 2/N 4/N 2/N 4/N 2/N 4/N 2/N 4/N 2/N 4/N WHEELS * G G G G G G G G G G DIMENSIONS FORK LENGTH mm 1150 1150 800 800 950 950 1000 1000 1220 1220 FORK WIDTH mm 525 525 525 525 525 525 525 525 525 525 HEIGHT FROM THE FLOOR MIN/MAX mm 85/200 85/200 85/200 85/200 85/200 85/200 85/200 85/200 85/200 85/200 WEIGHT kg 63 67 53 57 56 60 59 63 65 69 OPTIONAL OPTIONAL ROLLERS IN POLYURETHANE GZ000S00000 GZ000S00002 GZ000S00000 GZ000S00002 GZ000S00000 GZ000S00002 GZ000S00000 GZ000S00000 GZ000S00000 GZ000S00002 OPTIONAL WHEELS IN POLYURETHANE GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 OPTIONAL HAND OPERATED BRAKE GZ000S00005 GZ000S00005 GZ000S00005 GZ000S00005 GZ000S00005 GZ000S00005 GZ000S00005 GZ000S00005 GZ000S00005 GZ000S00005 G=Rubber, N=Nylon l 800 950 1000 1150 1220 l1 679 829 879 1029 1099 l2 450 600 650 800 870 l3 627 777 827 977 1047 l4 500 650 700 850 920 L 1200 1350 1400 1550 1620 Wa 1019 1168 1218 1367 1437 Ast 1484 1633 1683 1832 1902 The producer reserves the right to introduce changes to models and features without prior notice. 9
HAND PALLET TRUCKS GS SPECIAL Fit all your needs The GS Special series, available in several versions, is the ideal working tool for moving nearly all sizes of pallet. Suitable for smooth floors or other kinds of surfaces, these pallet trucks guarantee easy and light manoeuvrability. New: capacity 2.0T/2.5T 24 months warranty excluding wearing parts The hand pallet trucks of this series have big wheels (200x50) to reduce handling effort. Steel rollers Wheels The GS20 S4/B version - with its low profile, and reduceddiameter steel rollers, has the same capacity (2000Kg) as all the other versions in this Series. Tie-rod The steel tie-rods and reinforced forks give the pallet truck a greater strength, giving a good lifting capacity even for the longer sizes. 10
HAND PALLET TRUCKS GS SPECIAL CODE GFA71A00 GFA91A00 GFAA1A00 GFAB1A00 GFB00000 GM541000 GMB41000 MODEL 20 S4 20 S4 20 S4 20 S4 25 S4/M SUPERQUICK 25 S2/R SUPERQUICK 25 S4/R CAPACITY kg 2000 2000 2000 2000 2500 2500 2500 ROLLERS N /* 4/N 4/N 4/N 4/N 4/N 2/N 4/N WHEELS * G G G G G G G DIMENSIONS FORK LENGTH mm 1350 1500 1800 2000 800 1150 1150 FORK WIDTH mm 525 525 525 525 400 525 525 HEIGHT FROM THE FLOOR MIN/MAX mm 85/200 85/200 85/200 85/200 85/200 85/200 85/200 WEIGHT kg 87 101 108 113 54 63 67 OPTIONAL OPTIONAL ROLLERS IN POLYURETHANE GZ000S00002 GZ000S00002 GZ000S00002 GZ000S00002 GZ000S00002 GZ000S00000 GZ000S00002 OPTIONAL WHEELS IN POLYURETHANE GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 OPTIONAL HAND OPERATED BRAKE GZ000S00005 GZ000S00005 GZ000S00005 GZ000S00005 GZ000S00005 GZ000S00005 GZ000S00005 CODE GNA41000 GF545000 GFB45000 GF525000 GFB25000 GF565000 GFB65000 MODEL 20 S4/B 25 S2/L 25 S4/L 25 S2/L 25 S4/L 25 S2/L 25 S4/L CAPACITY kg 2000 2500 2500 2500 2500 2500 2500 ROLLERS N /* 4/A 2/N 4/N 2/N 4/N 2/N 4/N WHEELS * G G G G G G G DIMENSIONS FORK LENGTH mm 1150 1150 1150 1000 1000 1220 1220 FORK WIDTH mm 525 685 685 685 685 685 685 HEIGHT FROM THE FLOOR MIN/MAX mm 56,5/170 85/200 85/200 85/200 85/200 85/200 85/200 WEIGHT kg 71 70 74 66 70 72 76 OPTIONAL OPTIONAL ROLLERS IN POLYURETHANE - GZ000S00000 GZ000S00002 GZ000S00000 GZ000S00002 GZ000S00000 GZ000S00002 OPTIONAL WHEELS IN POLYURETHANE - GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 OPTIONAL HAND OPERATED BRAKE - GZ000S00005 GZ000S00005 GZ000S00005 GZ000S00005 GZ000S00005 GZ000S00005 G=Rubber, N=Nylon, A=Steel. l 800 1000 1150 1220 1350 1500 1800 2000 l1 679 879 1029 1099 1229 1379 1679 1879 l2 450 650 800 870 1000 1150 1450 1650 l3 627 827 977 1047 1177 1327 1627 1827 l4 500 700 850 920 1050 1200 1500 1700 L 1200 1400 1550 1620 1750 1900 2200 2400 Wa 1019 1218 1367 1437 1566 1715 2015 2215 Ast 1484 1683 1832 1902 2031 2180 2480 2680 The producer reserves the right to introduce changes to models and features without prior notice. 11
HAND PALLET TRUCKS GS PREMIUM Smooth with fragile loads The GS Premium Series, available in several versions, distinguishes itself with its great ease of use. It s a reliable, safe and suitable working tool to carry fragile and delicate loads like crystal, glass and ceramics, thanks to the lowering control system. 5 years warranty* and 50.000 cycles certification on the hydraulic pump capacity 2.5T Two speed lowering control * = Using original PRAMAC Oil. For further details see maintenance instruction book 24 months warranty excluding wearing parts All the controls (lowering / neutral / lifting) are available in a single lever for simple and safe control, with a two speed lowering control. Ergonomic and covered handle for operator comfort, reducing lifting and rolling effort. Rollers Covered handle Supplementary rollers allow an easier entrance and a quicker exit from a closed pallet, reducing the impact on the main rollers and guaranteeing a longer life. Polyurethane rollers as standard. Balancing wheels The balancing wheels adapt easily to every kind of surface, guaranteeing great practicality and manoeuvrability in all applications even with heavy loads. 12
TRANSPALLET GS PREMIUM CODE GD5410V0 GDB410V0 GD5010V0 GDB010V0 GD5110V0 GDB110V0 GD5450V0 GDB450V0 MODEL 25 S2 25 S4 25 S2 25 S4 25 S2 25 S4 25 S2 / L 25 S4 / L CAPACITY kg 2500 2500 2500 2500 2500 2500 2500 2500 ROLLERS N /* 2/P 4/P 2/P 4/P 2/P 4/P 2/P 4/P WHEELS * G G G G G G G G DIMENSIONS FORK LENGTH mm 1150 1150 800 800 950 950 1150 1150 FORK WIDTH mm 525 525 525 525 525 525 685 685 HEIGHT FROM THE FLOOR MIN/MAX mm 85/200 85/200 85/200 85/200 85/200 85/200 85/200 85/200 WEIGHT kg 64 68 54 58 57 61 71 75 OPTIONAL OPTIONAL WHEELS IN POLYURETHANE GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 GZ000S00004 OPTIONAL HAND OPERATED BRAKE GZ000S00006 GZ000S00006 GZ000S00006 GZ000S00006 GZ000S00006 GZ000S00006 GZ000S00006 GZ000S00006 *G=Rubber, P=Polyurethane l 800 950 1150 l1 679 829 1029 l2 450 600 800 l3 627 777 977 l4 500 650 850 L 1200 1350 1550 Wa 1019 1168 1367 Ast 1484 1633 1832 The producer reserves the right to introduce changes to models and features without prior notice. 13
HAND PALLET TRUCKS GS Mr HYDRO Galvanised and Stainless Steel Mr Hydro Series, available in several versions, is the ideal machine to be used in humid or damp conditions. It is suitable for all applications where high hygienic standards, such as chemical, pharmaceutical and food & beverage industries, are enforced. New: capacity 2.5T 12 months warranty Hydraulic pump In the stainless series, the hydraulic pump - in order to guarantee the maximum endurance in humid or damp conditions - is built with the same sea-bronze material used for ship propellers. The electric polishing process provides an esthetic appeal, and with treatment that eliminates deterioration typical of models with standard painting, guarantees maximum hygiene. Electric polishing Grease Nipples The Stainless Steel model has articulated joints fitted with grease nipples for simple lubrication. 14
HAND PALLET TRUCKS GS Mr HYDRO CODE GK541000 GKB41000 GK501000 GKB01000 GKB65000 GL541000 GLB41000 GR541000 GRB41000 MODEL 25 S2/G 25 S4/G 25 S2/G 25 S4/G 25 S4/G 25 S2/X 25 S4/X 25 S2/I 25 S4/I CAPACITY kg 2500 2500 2500 2500 2500 2500 2500 2500 2500 ROLLERS N /* 2/N 4/N 2/N 4/N 4/N 2/NE 4/NE 2/NE 4/NE WHEELS * N N N N N NE NE NE NE DIMENSIONS FORK LENGTH mm 1150 1150 800 800 1220 1150 1150 1150 1150 FORK WIDTH mm 525 525 525 525 685 525 525 525 525 HEIGHT FROM THE FLOOR MIN/MAX mm 85/200 85/200 85/200 85/200 85/200 85/200 85/200 85/200 85/200 WEIGHT kg 66 70 56 60 77 66 70 66 70 FRAME WORKING CONDITION C -12/+50-12/+50-12/+50-12/+50-12/+50-30/+50-30/+50-30/+50-30/+50 PUMP GALVANIZED GALVANIZED GALVANIZED GALVANIZED GALVANIZED GALVANIZED GALVANIZED BRONZE BRONZE FRAME GALVANIZED GALVANIZED GALVANIZED GALVANIZED GALVANIZED STAINLESS STAINLESS STAINLESS STAINLESS TIE-ROD GALVANIZED GALVANIZED GALVANIZED GALVANIZED GALVANIZED GALVANIZED GALVANIZED STAINLESS STAINLESS TIE BAR GALVANIZED GALVANIZED GALVANIZED GALVANIZED GALVANIZED GALVANIZED GALVANIZED STAINLESS STAINLESS HANDLE GALVANIZED GALVANIZED GALVANIZED GALVANIZED GALVANIZED STAINLESS STAINLESS STAINLESS STAINLESS *N=Nylon, NE=Nylon Extra (Nylon with sealed bearing) l 800 1150 1220 l1 679 1029 1099 l2 450 800 870 l3 627 977 1047 l4 500 850 920 L 1200 1550 1620 Wa 1019 1367 1437 Ast 1484 1832 1902 The producer reserves the right to introduce changes to models and features without prior notice. 15
SCALES PALLET TRUCKS SCALE Intelligent Weighing System The Scale Series is available in two different models, both with an intelligent weighing device with several options. Suitable for lifting and carrying heavy loads, this Series is not designed for official weighing but is extremely helpful for internal use. 12 months warranty GS/P 25 stainless The GS/P 25 model is also available in a Stainless Steel version ideal to be used in humid or damp conditions. It is suitable for all applications where high hygienic standards are enforced. The central display allows a quick and simple reading of the carried weight. Its software allows not only weighing but also unit counting, adding and totalling of multiple loads, with serial number that can be stored within its memory. Display (GS/P25) 16
SCALES PALLET TRUCKS SCALE CODE GJB53000 GJB53S00 GHA33000 GJB530NN GJB53SNN MODEL GS/P 25 PX20 GS/P 25 PRINTER PX20 GS/P 25 STAINLESS GS/P 25 STAINLESS PRINTER CAPACITY Load capacity Kg 2500 2500 2000 2500 2500 DRIVING SYSTEM Escort type BATTERY Voltage / capacity (min-max) V/Ah 6/1.1 6/1.1 6/1.1 6/1.1 6/1.1 WEIGHT with battery Kg 124 124 117 132 132 DIMENSIONS ELEVATION Total elevation mm 205 205 205 205 205 Normal free elevation mm 115 115 115 115 115 LENGTH Fork length mm 1180 1180 1180 1180 1180 Fork width x thickness mm 180x60 180x60 180x60 180x60 180x60 Total Length mm 1596 1596 1596 1596 1596 Width mm 555 555 555 555 555 TURNING RADIUS Wa mm 1426 1426 1426 1426 1426 STOWAGE PASSAGE Ast 800x1200 mm 1846 1846 1846 1846 1846 WHEELS Driver/load side Nr 2/4 2/4 2/4 2/4 2/4 Driver/load side * G/P G/P G/P G/P G/P SCALE Accuracy % 0,05 0,05 0,1 0,05 0,05 Resolution Kg 0,5 0,5 1 0,5 0,5 Endurance h 50 50 30 50 50 Load cells N 4 4 4 4 4 * G=Rubber, P=Polyurethane, N=Nylon GS/P25 - GS/P25 stainless The producer reserves the right to introduce changes to models and features without prior notice. 17
HIGH LIFT PALLET TRUCKS HX10M Strength in the manual lifting The HX 10M series allows easier and lighter manual lifting up to a height of 800mm, creating a useful workbench suitable for places like mechanical workshops. It can also be used to support other machines in production, picking and similar areas. 12 months warranty The front stabilizers improve its balance, making the work easier even when lifting and working with heavy loads. Front stabilizers (optional) Control lever All the controls (lowering / neutral / lifting) are available in a single lever for simple and safe control. At a height of over 400mm, the rear stabilizers make the HX 10M a very safe and steady working platform, preventing rocking and movement in all directions. Rear stabilizers 18
HIGH LIFT PALLET TRUCKS HX10M CODE GT042000 GT044000 MODEL HX 10M HX 10M CAPACITY Q Load capacity Kg 1000 1000 DRIVING SYSTEM Escort type DIMENSIONS ELEVATION h3 Total elevaton mm 800 800 h2 Normal free elevation mm 400 400 LENGTH I Fork length mm 1150 1150 nxs1 Fork width x thickness mm 160x48 160x48 L Total Length mm 1526 1526 B Width mm 540 680 TURNING RADIUS Wa mm 1340 1340 STOWAGE PASSAGE Ast 800x1200 mm 1840 1840 WHEELS Driver/load side Nr 2/2 2/2 Driver/load side * P/P P/P * G=Rubber, P=Polyurethane ACCESSORIES FRONT STABILIZERS CODE EY000A0000A Polyurethane load rollers as standard The producer reserves the right to introduce changes to models and features without prior notice. 19
HIGH LIFT PALLET TRUCKS HX10E Strength in the electric lifting The HX 10E series offers great reliability and practicality thanks to the innovative new frontal protection and the reduced weight. The truck allows electric lifting of weights to a height of 800mm, it creates a useful adjustable working platform suitable for places such as workshops. It can also be used to support other machines in production, picking and similar areas. Batter and External Battery Charger Supplied as Standard 12 months warranty Auto Levelling System (Upon request) An automatic system that uses sensors to adjust the forks, maintaining a constant working height An acoustic-visual signal represents every movement of the forks Possibility of regulation of the photo cell both in height and in the reading angle A micro switch disconnects the power if the forks should stop running during lifting or lowering - both to reduce the battery energy consumption and to safeguard the operator At a height of over 400mm, the rear stabilizers make the HX 10E a very safe and steady working platform, preventing rocking and movement in all directions. Stabilizers Front protection smaller dimensions allowing operator foot safety formed steel cover shielding wheels and the hydraulic unit protective top cover made in ABS shock resistant plastic shieding the battery redesigned and improved battery support 20
HIGH LIFT PALLET TRUCKS HX10E CODE EF042000 EF044000 CODE UK EF042400 EF044400 MODEL HX 10E HX 10E CAPACITY Q Load capacity Kg 1000 1000 DRIVING SYSTEM Escort DIMENSIONS ELEVATION h3 Total elevaton mm 800 800 h2 Normal free elevation mm 400 400 LENGTH I Fork length mm 1150 1150 nxs1 Fork width x thickness mm 160x48 160x48 L Total Length mm 1685 1685 B Width mm 540 680 TURNING RADIUS Wa mm 1445 1445 STOWAGE PASSAGE Ast 800x1200 mm 1945 1945 WHEELS Driver/load side Nr 2/2 2/2 Driver/load side * G/P G/P ELECTRICAL EQUIPMENT BATTERY Voltage / capacity V/Ah 12/60 12/60 CHARGER Voltage / capacity V/Ah 12/10 12/10 ELECTRIC MOTOR Lifting motor kw 1,6 1,6 * G=Rubber, P=Polyurethane ACCESSORIES FRONT STABILIZERS CODE EY000A0000A Polyurethane load rollers as standard The producer reserves the right to introduce changes to models and features without prior notice. 21
ELECTRIC PALLET TRUCKS CX14 Great power and stability The CX14 powered truck is available in several versions fitted with MOSFET technology. They are suitable for carrying loads on smooth floors and other surfaces. The small size and turning radius make the CX14 range ideal for work in areas where space is at a premium, such as lorries or narrow aisles. Batteries and battery charger built in 12 months warranty The Plus version has a very powerful battery (110Ah) that gives better endurance. Traction battery Handle with control Large dimensioned Butterfly button control direction and speed. Double lifting command placed on both sides of the handle. Battery discharge indicator. Safety push button + horn located on top of the tiller head. Stabilising wheels Two adjustable wheels allow ease of movement, even on the most difficult of surfaces. The wheels also provide great stability under all conditions. 22
ELECTRIC PALLET TRUCKS CX14 CODE EC241000 EC245000 EC241100 EC245100 EC221000 EC225000 EC221100 EC225100 CODE UK EC241700 EC245700 EC241800 EC245800 EC221700 EC225700 EC221800 EC225800 MODEL CX 14 TYPE 1150X525 1150X685 1150X525 PLUS 1150X685 PLUS 1000X525 1000X685 1000X525 PLUS 1000X685 PLUS CAPACITY Q Nominal load Kg 1400 1400 1400 1400 1400 1400 1400 1400 CENTRE OF GRAVITY C Distance mm 600 600 600 600 600 600 600 600 DRIVING SYSTEM Escort type DIMENSIONS ELEVATION h3 Elevation mm 200 200 200 200 200 200 200 200 h2 Normal free elevation mm 115 115 115 115 115 115 115 115 LENGTH I Fork length mm 1150 1150 1150 1150 1000 1000 1000 1000 nxs1 Fork widht x thickness mm 150X50 150X50 150X50 150X50 150X50 150X50 150X50 150X50 DIMENSIONS L Total length mm 1650 1650 1650 1650 1500 1500 1500 1500 L2 Steer unit length mm 500 500 500 500 500 500 500 500 B Width mm 720 720 720 720 720 720 720 720 Working width mm 525 685 525 685 525 685 525 685 TURNING RADIUS Wa mm 1435 1435 1435 1435 1285 1285 1285 1285 STOWAGE PASSAGES Ast 800x1200 mm 1900 1900 1900 1900 1750 1750 1750 1750 PERFORMANCES SPEED Translation with / without load Km/h 4,5/4,7 4,5/4,7 4,5/4,7 4,5/4,7 4,5/4,7 4,5/4,7 4,5/4,7 4,5/4,7 Lifting with / without load m/s 0,02/0,03 0,02/0,03 0,02/0,03 0,02/0,03 0,02/0,03 0,02/0,03 0,02/0,03 0,02/0,03 Descent with / without load m/s 0,04 0,04 0,04 0,04 0,04 0,04 0,04 0,04 MAX SUP. SLOPES With / without load % 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 WEIGHTS EMPTY WEIGHT With battery Kg 203 207 246 250 199 203 242 246 AXLE LOADING With load (driver/load) Kg 562/1041 565/1042 599/1047 602/1048 561/1038 564/1039 598/1044 601/1045 Without load (driver/load) Kg 170/33 173/34 207/39 210/40 169/30 172/31 206/36 209/37 FRAME WHEELS Driver side/load Nr 2+1/2 2+1/2 2+1/2 2+1/2 2+1/2 2+1/2 2+1/2 2+1/2 Driver side/load P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P TYRES Driver-wheel dimensions mm Ø 250X76 250X76 250X76 250X76 250X76 250X76 250X76 250X76 Stabilizer wheels dimensions mm Ø 100X40 100X40 100X40 100X40 100X40 100X40 100X40 100X40 Load side dimensions mm Ø 82X80 82X80 82X80 82X80 82X80 82X80 82X80 82X80 WHEELS BASE Y Back/front mm 1195 1195 1195 1195 1045 1045 1045 1045 X mm 215 215 215 215 215 215 215 215 OPERATING BRAKE Electric type DRIVE Traction(T) / starter(s) type S S T T S S T T BATTERY Voltage/capacity V/Ah 24/74 24/74 24/110* 24/110* 24/74 24/74 24/110* 24/110* Weight Kg 36 36 78 78 36 36 78 78 Endurance h 3 3 5 5 3 3 5 5 ELECTRIC MOTORS Traction motor kw 0,7 0,7 0,7 0,7 0,7 0,7 0,7 0,7 Lifting motor kw 0,4 0,4 0,4 0,4 0,4 0,4 0,4 0,4 GEAR CONTROL Electric type BATTERY CHARGER V/A 24/13 24/13 24/20 24/20 24/13 24/13 24/20 24/20 G=Rubber, P=Polyurethane * Battery capacity of 132 Ah in 20 hours rating ACCESSORIE POLYURETHANE DRIVING WHEEL RING CODE HZ000S00005 Available with double load roller and carved driving wheel ring The producer reserves the right to introduce changes to models and features without prior notice. 23
ELECTRIC PALLET TRUCKS QX18 QX20 The first choice for professional handling PRAMAC s new range of electric pallet trucks, the QX series, is designed to give professional customers the right solution for their own specific handling needs. These trucks can be used in high intensity operations yet are flexible enough to satisfy a wide variety of warehouse applications providing high performance and efficiency. Multifunctional handle Cast steel fork tips Vertically mounted motor 1 entry roller 4 exit rollers 12 months warranty Tie rod with pulling system SEM* technology and braking system with energy recovery The battery cover is easily removed allowing easier access to the battery housing. In order to have a truck personalised this Series offers a wide range of high performance battery options up to 230Ah. The battery charger connector allows the operator to connect it to an external battery charger. Battery Housing Drive wheel and stabilizer wheels A larger motor wheel with SEM* technology provides excellent speed control, with or without a load on board (6km/h). Two adjustable wheels allow ease of movement, even on the most difficult of surfaces. The wheels also provide greater stability under all conditions. Ergonomic handle Hour meter and battery discharge indicator displays A large throttle controls the direction and speed. The Safety push button + horn The Double lifting command is placed on both the sides of the handle. On/Off key Tiller head and controls * SEM = Separately Excited Motors 24
ELECTRIC PALLET TRUCKS QX18 QX20 CODE EGH23000 EGH43000 EGH24000 EGH44000 EG423000 EG443000 EG424000 EG444000 MODEL QX 18 QX 20 TYPE 550X1000 550X1150 680X1000 680X1150 550X1000 550X1150 680X1000 680X1150 CAPACITY Q Nominal load Kg 1800 1800 1800 1800 2000 2000 2000 2000 CENTRE OF GRAVITY C Distance mm 600 600 600 600 600 600 600 600 DRIVING SYSTEM Escort DIMENSIONS ELEVATION h3 Total Elevation mm 200 200 200 200 200 200 200 200 h2 Normal Free Elevation mm 115 115 115 115 115 115 115 115 LENGTH I Fork Length mm 1000 1150 1000 1150 1000 1150 1000 1150 nxs1 Fork width x thickness mm 170x55 170x55 170x55 170x55 170x55 170x55 170x55 170x55 L Total length mm 1565 1715 1565 1715 1565 1715 1565 1715 DIMENSIONS L2 Steer unit length mm 567 567 567 567 567 567 567 567 B Width mm 716 716 716 716 716 716 716 716 Working width mm 550 550 680 680 550 550 680 680 TURNING RADIUS Wa mm 1425 1575 1425 1575 1425 1575 1425 1575 STOWAGE PASSAGE Ast 800x1200 mm 1850 2000 1850 2000 1850 2000 1850 2000 PERFORMANCES SPEED Translation with/wothout load Km/h 6,0/6,0 6,0/6,0 6,0/6,0 6,0/6,0 6,0/6,0 6,0/6,0 6,0/6,0 6,0/6,0 Lifting with/without load m/s 0,04/0,05 0,04/0,05 0,04/0,05 0,04/0,05 0,04/0,05 0,04/0,05 0,04/0,05 0,04/0,05 Descent with/without load m/s 0,05/0,04 0,05/0,04 0,05/0,04 0,05/0,04 0,05/0,04 0,05/0,04 0,05/0,04 0,05/0,04 MAX. SUP. SLOPES with/without load % 10/20 10/20 10/20 10/20 10/20 10/20 10/20 10/20 WEIGHTS EMPTY WEIGHTS With battery 230Ah Kg 510 520 510 520 510 520 510 520 AXLE LOADING With load (driver/load) Kg 723/1587 881/1439 723/1587 881/1439 756/1754 940/1580 756/1754 940/1580 Without load (driver/load) Kg 390/120 395/125 390/120 395/125 390/120 395/125 390/120 395/125 FRAME WHEELS Driver/load side Nr 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 Driver/load side mm Ø P+P/P P+P/P P+P/P P+P/P P+P/P P+P/P P+P/P P+P/P TYRES Driver-wheel dimensions mm Ø 230x75 230x75 230x75 230x75 230x75 230x75 230x75 230x75 Stabilizer wheels dimensions mm Ø 100x40 100x40 100x40 100x40 100x40 100x40 100x40 100x40 Load side dimensions mm 85x90 85x90 85x90 85x90 85x90 85x90 85x90 85x90 WHEELS BASE Y Back/Front mm 1224 1373 1224 1373 1224 1373 1224 1373 X mm 175 175 175 175 175 175 175 175 OPERATING BRAKE Electric type DRIVE Traction type BATTERY Voltage/Capacity (min-max) V/Ah 24/180-230 24/180-230 24/180-230 24/180-230 24/180-230 24/180-230 24/180-230 24/180-230 Weight (min-max) Kg 190-216 190-216 190-216 190-216 190-216 190-216 190-216 190-216 ELECTRIC MOTORS Traction motor KW 0,9 0,9 0,9 0,9 1,2 1,2 1,2 1,2 Lifting motor KW 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 GEAR CONTROLS Electric type *P=Polyurethane ACCESSORIES BATTERY CODE EY000A00008 EY000A00009 TYPE V-Ah 24-180 24-230 ENDURANCE h 6 8 WEIGHT Kg 190 216 CHARGER CODE EY000A00004 HY000A00005 CODE UK EY000A00005 HY000A00006 TYPE V-A 24-30 24-40 Available with double load roller and Vulkollan or carved driving wheel ring The producer reserves the right to introduce changes to models and features without prior notice. 25
ELECTRIC PALLET TRUCKS QX22 For the best performance in handling environments The QX22 is a highly versatile machine: it can be used for pallet handling in tight spaces or over longer distances using the ride on platform. The strong frame, high battery capacity (315Ah) and mobile battery change station makes this truck ideal even for intensive applications. The SEM* motor technology provides excellent speed control (up to 10km/h) together with a high performance braking system with energy recovery. Multi-functional handle Vertically mounted motor Cast steel fork tips 1 entry roller 4 exit rollers Footplate with a hardwearing PVC cover Tie rod with pulling system 12 months warranty The fork ends made of steel Battery Replacement casting, and include 1 entry/4 exit rollers. The fork ends are made of steel casting, and include 1 entry/4 exit rollers. The fork ends are welded onto a fork of 8mm thickness which has additional inner reinforcements. Thanks to the connecting rod pulling systems, the material has a higher resistance as it is stressed by traction rather than compression. Forks and connecting The battery housing comes with a removing side panel and an inside wheeled bed to reduce effort during battery substitution. No tools are required for this substitution. A mobile battery change station is available upon request for fast battery replacement. SEM* technology and braking system with energy recovery Tiller head and controls Hour meter and battery discharge indicators. A large throttle controls the direction and speed. The Safety push button + horn. The Double lifting command is placed on both the side of the handle. Starter key. The handle bar is made of box-shaped iron sheet. * SEM = Separately Excited Motors 26
ELECTRIC PALLET TRUCKS QX22 CODE EGD23000 EGD43000 EGD24000 EGD44000 MODEL QX 22 TYPE 1000X550 1150X550 1000X680 1150X680 CAPACITY Q Nominal load Kg 2200 2200 2200 2200 CENTRE OF GRAVITY C Distance mm 600 600 600 600 DRIVING SYSTEM Escort / Standing type DIMENSIONS ELEVATION h3 Total Elevation mm 200 200 200 200 h2 Normal Free Elevation mm 115 115 115 115 LENGTH I Fork Length mm 1000 1150 1000 1150 nxs1 Fork width x thickness mm 170x55 170x55 170x55 170x55 L Total length mm 1767/2102 1917/2252 1767/2102 1917/2252 DIMENSIONS L2 Steer unit length mm 767/1102 767/1102 767/1102 767/1102 B Width mm 716 716 716 716 Working width mm 550 680 550 680 TURNING RADIUS Wa mm 1612/1939 1762/2089 1612/1939 1762/2089 STOWAGE PASSAGE Ast 800x1200 mm 2017/2352 2167/2502 2017/2352 2167/2502 PERFORMANCES SPEED Translation with/wothout load Km/h 6/6 (10/10) 6/6 (10/10) 6/6 (10/10) 6/6 (10/10) Lifting with/without load m/s 0,04/0,05 0,04/0,05 0,04/0,05 0,04/0,05 Descent with/without load m/s 0,04/0,05 0,04/0,05 0,04/0,05 0,04/0,05 MAX. SUP. SLOPES with/without load % 8/20 8/20 8/20 8/20 WEIGHTS EMPTY WEIGHTS With battery 315Ah Kg 682 690 682 690 AXLE LOADING With load (driver/load) Kg 812/2070 1023/1867 812/2070 1023/1867 Without load (driver/load) Kg 451/231 483/207 451/231 483/207 FRAME WHEELS Driver/load side Nr 1X+2/4 1X+2/4 1X+2/4 1X+2/4 Driver/load side mm Ø P+P/P P+P/P P+P/P P+P/P TYRES Driver-wheel dimensions mm Ø 230x75 230x75 230x75 230x75 Stabilizer wheels dimensions mm Ø 100x40 100x40 100x40 100x40 Load side dimensions mm 85x80 85x80 85x80 85x80 WHEELS BASE Y Back/Front mm 1370 1520 1370 1520 X mm 175 175 175 175 OPERATING BRAKE Electric type DRIVE Traction type BATTERY Voltage/Capacity (min-max) V/Ah 24/230-315 24/230-315 24/230-315 24/230-315 Weight (min-max) Kg 215-277 215-277 215-277 215-277 ELECTRIC MOTORS Traction motor KW 2.0 2.0 2.0 2.0 Lifting motor KW 2.2 2.2 2.2 2.2 GEAR CONTROLS Electric type *P=Polyurethane ACCESSORIES BATTERY CODE EY000A0000C EY000A0000B TYPE V-Ah 24-230 24-315 ENDURANCE h 8 10 WEIGHT Kg 216 277 CHARGER CODE HY000A00005 HY000A00003 CODE UK EY000A00006 HY000A00004 TYPE V-A 24-40 24-50 MOBILE BATTERY CHANGE STATION CODE EY000A00007 Available with single load roller and Vulkollan or carved driving wheel ring The producer reserves the right to introduce changes to models and features without prior notice. 27
STACKERS MX High quality, low price The new MX Series, besides maintaining the same excellent compromise between price and performance typical of the previous series, is an even stronger machine. The increased capacity, the reinforced forks and the steel pulleys and roller-driven forks are just some examples of its increased quality. The foot plate allows for easier lifting of the forks without load. 12 months warranty A big chain and a strong steel pulley ensure great resistance and reliability even working with the max load capacity. Steel Pulley Max pressure valve When maximum load capacity is exceeded, the oil pressure exceeds its maximum limit and the valve automatically stops the forks from lifting. In this way, possible structural damage is avoided. Forks are precision guided by 4 steel rollers moving along the mast. Roller-driven forks Handle Ergonomic handle fitted with plastic cover. All the controls (lowering/ neutral/lifting) are available in a single lever for simple and safe control. 28
STACKERS MX CODE HB105000000 HB305000000 HB310000000 MODEL MX 510 MX 516 MX 1016 CAPACITY Q Nominal load kg 500 500 1000 CENTER OF GRAVITY C Distance mm 600 600 600 DRIVING SYSTEM Escort type DIMENSIONS ELEVATION h3 Elevation mm 1000 1600 1600 h2 Normal free elevation mm 910 1510 1510 LENGTH l Fork length mm 1150 1150 1150 nxs1 Fork width x thickness mm 170X60 170X60 170X60 DIMENSIONS L Total length mm 1690 1690 1690 L2 Steer unit length mm 540 540 540 B Width mm 740 740 740 h1 Minimum dimensions mm 1490 2080 2080 h4 Maximum dimensions (min/max) mm 1490 2080 2080 V Height from floor mm 90 90 90 TURNINGS RADIUS Wa mm 1400 1400 1400 STOWAGE PASSAGE Ast 800x1200 mm 2000 2000 2000 PERFORMANCES SPEED Lifting with/without load m/s 0,16/0,05 0,12/0,03 0,12/0,03 Descent with/without load n 37 73 73 WEIGHTS EMPTY WEIGHT kg 185 200 210 AXLE LOADING With load (driver/load) kg 202/483 213/487 309/901 Without load (driver/load) kg 113/72 123/77 129/81 FRAME WHEELS Driver side/load Nr 2/2 2/2 2/2 TYRES Driver side/load * N/N N/N N/N Stabilizer wheels dimensions mmø 150X40 150X40 150X40 Load side dimensions mmø 80X78 80X78 80X78 WHEELS BASE Y Back/Front mm 1240 1240 1240 X mm 350 350 350 OPERATING BRAKE Mechanic type *N=NYLON The producer reserves the right to introduce changes to models and features without prior notice. 29
STACKERS TX Elevated Strength The TX Series, available in several versions, features manual movement and electric lifting. These models are very steady, and are suitable for lifting very heavy loads. The TX12 version has polyurethane wheels as standard to reduce resistance and effort required even with the full load capacity (1.2t). Batteries and battery charger built in 12 months warranty The foot-brake, situated on the right wheel, is also a parking brake. Foot-brake Battery charger In case of low battery power, the control system prevents lifting. The cut-off key functions as both a start-and-stop mechanism and parking and safety brake. Starting and cutoff battery key Adjustable pads Due to its higher lift & load capacity, the TX12 models are fitted with adjustable buffers to minimize possible swings. 30
STACKERS TX CODE HA010000 HA310000 HA410000 HA512000 HA612000 HA712000 CODE UK HA010700 HA310700 HA410700 HA512700 HA612700 HA712700 MODEL TX 10/09 TX 10/16 TX 10/20 TX 12/25 TX 12/29 TX 12/35 CAPACITY Q Nominal load kg 1000 1000 1000 1200 1200 1200 CENTER OF GRAVITY C Distance mm 600 600 600 600 600 600 DRIVING SYSTEM Escort type DIMENSIONS ELEVATION h3 Elevation mm 900 1600 2000 2500 2900 3500 h2 Normal free elevation mm 810 1510 1910 - - 80 LENGTH l Fork length mm 1150 1150 1150 1150 1150 1150 nxs1 Fork width x thickness mm 150X70 150X70 150X70 150X70 150X70 150X70 DIMENSIONS L Total length mm 1750 1750 1750 1850 1850 1850 L2 Steer unit length mm 600 600 600 700 700 700 B Width mm 750 750 750 850 850 850 h1 Minimum dimensions mm 1300 1970 2370 1780 1980 2250 B1 Maximum dimensions (min/max) mm 1300 1970 2370 2985 3385 3915 TURNINGS RADIUS Wa mm 1440 1440 1440 1760 1760 1760 STOWAGE PASSAGE Ast 800x1200 mm 2210 2210 2210 2375 2375 2375 PERFORMANCES SPEED Lifting with/without load m/s 0,09/0,12 0,09/0,12 0,09/0,12 0,07/0,10 0,07/0,10 0,07/0,10 Descent with/without load m/s 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 WEIGHTS EMPTY WEIGHT With battery kg 290 305 315 424 440 485 AXLE LOADING With load (driver/load) kg 226/1064 239/1066 251/1064 500/1125 509/1131 545/1140 Without load (driver/load) kg 195/95 208/97 220/95 308/117 317/123 353/132 FRAME WHEELS Driver side/load Nr 2/2 2/2 2/2 2/2 2/2 2/2 TYRES Driver side/load * G/N G/N G/N P/N P/N P/N Stabilizer wheels dimensions mmø 200X50 200X50 200X50 200X50 200X50 200X50 Load side dimensions mmø 82X70 82X70 82X70 82X70 82X70 82X70 WHEELS BASE Y Back/Front mm 965 965 965 1155 1155 1155 X mm 520 520 520 365 365 365 OPERATING BRAKE Mechanic type ELECTRICAL EQUIPMENT ELECTRIC MOTORS Lifting motor kw 1,6 1,6 1,6 2,2 2,2 2,2 BATTERY Starter type Voltage/capacity V/Ah 12/74 12/74 12/74 24/74 24/74 24/74 Weight kg 18 18 18 36 36 36 CHARGER V-A 12-15 12-15 12-15 24-13 24-13 24-13 * G=Rubber, P=Polyurethane, N=Nylon The producer reserves the right to introduce changes to models and features without prior notice. 31
STACKERS GX The Compact Stacker This compact truck fitted with MOSFET technology provides the perfect solution where space is at a premium. These versions are fitted with gel batteries that will not possibly loose any battery fluid meaning that no maintenance is necessary and suitable for all applications where high hygienic standards are required (chemical, pharmaceutical and food & beverage industries). Batteries and battery charger built in Available with a double fork lifting command 12 months warranty Tiller handle and controlls Large butterfly control allows accurate speed and direction control. Battery discharge indicator. Safety button and horn are located on the top of the tiller head Handle bar made of cubic iron sheet. The strong and easily removable plastic cover allows simple access to the inside parts for easier maintenance. In case of low battery power, the control system prevents lifting but allows movement. Battery Traction battery The Plus and Gel versions have a powerful 132Ah battery for better endurance. 32
STACKERS GX CODE CODE UK MODEL GX 10/09 GX 10/16 GX 10/20 HC010000 HC310000 HC410000 HC010300 HC310300 HC410300 HC512000 HC612000 HC712000 HC512100 HC612100 HC712100 HC512300 HC612300 HC712300 HC010700 HC310700 HC410700 HC010900 HC310900 HC410900 HC512700 HC612700 HC712700 HC512800 HC612800 HC712800 HC512900 HC612900 HC712900 GX 10/09 GEL GX 10/16 GEL GX 10/20 GEL GX 12/25 GX 12/29 GX 12/35 CAPACITY Q Nominal load Kg 1000 1000 1000 1000 1000 1000 1200 1200 1200 1200 1200 1200 1200 1200 1200 CENTER OF GRAVITY C Distance mm 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 DRIVING SYSTEM Escort DIMENSIONS ELEVATION h3 Elevation mm 900 1600 2000 900 1600 2000 2500 2900 3500 2500 2900 3500 2500 2900 3500 h2 Normal free elevation mm 810 1510 1910 810 1510 1910 - - 80 - - 80 - - 80 LENGTH l Fork length mm 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 nxs1 Fork width x thickness mm 150X70 150X70 150X70 150X70 150X70 150X70 150X70 150X70 150X70 150X70 150X70 150X70 150X70 150X70 150X70 DIMENSIONS L Total length mm 1825 1825 1825 1825 1825 1825 1825 1825 1825 1825 1825 1825 1825 1825 1825 L2 Steer unit length mm 675 675 675 675 675 675 675 675 675 675 675 675 675 675 675 B Width mm 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 h1 Minimum dimensions mm 1300 1970 2370 1300 1970 2370 1780 1980 2250 1780 1980 2250 1780 1980 2250 h4 Maximum dimensions mm 1300 1970 2370 1300 1970 2370 2985 3385 3915 2985 3385 3915 2985 3385 3915 TURNINGS RADIUS Wa mm 1460 1460 1460 1460 1460 1460 1460 1460 1460 1460 1460 1460 1460 1460 1460 STOWAGE PASSAGE Ast 800x1200 mm 2075 2075 2075 2075 2075 2075 2075 2075 2075 2075 2075 2075 2075 2075 2075 PERFORMANCES SPEED Translation with/without load km/h 4,0/5,0 4,0/5,0 4,0/5,0 4,0/5,0 4,0/5,0 4,0/5,0 4,0/5,0 4,0/5,0 4,0/5,0 4,0/5,0 4,0/5,0 4,0/5,0 4,0/5,0 4,0/5,0 4,0/5,0 Lifting with/without load m/s 0,09/0,12 0,09/0,12 0,09/0,12 0,09/0,12 0,09/0,12 0,09/0,12 0,07/0,10 0,07/0,10 0,07/0,10 0,07/0,10 0,07/0,10 0,07/0,10 0,07/0,10 0,07/0,10 0,07/0,10 Descent with/without load m/s 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 MAX SUPERABLE GRADIENT With/without load % 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 WEIGHTS EMPTY WEIGHT With battery kg 369 390 410 393 414 434 490 505 540 524 539 574 526 541 576 AXLE LOADING With load (driver/load) kg 427/942 442/948 456/954 441/952 456/958 470/964 549/1141 563/1142 589/1151 573/1151 587/1152 613/1161 571/1155 585/1156 611/1165 Without load (driver/load) kg 272/97 287/103 301/109 286/107 301/113 315/119 362/128 376/129 402/138 386/138 400/139 426/148 384/142 398/143 424/152 FRAME WHEELS Driver side/load Nr 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 TYRES Driver side/load P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P Drive wheel dimensions mmø 240X60 240X60 240X60 240X60 240X60 240X60 250X76 250X76 250X76 250X76 250X76 250X76 250X76 250X76 250X76 Stabilizer wheels dimensions mmø 150X40 150X40 150X40 150X40 150X40 150X40 150X40 150X40 150X40 150X40 150X40 150X40 150X40 150X40 150X40 Load side dimensions mmø 82X70 82X70 82X70 82X70 82X70 82X70 82X70 82X70 82X70 82X70 82X70 82X70 82X70 82X70 82X70 WHEELS BASE Y Back/Front mm 1190 1190 1190 1190 1190 1190 1190 1190 1190 1190 1190 1190 1190 1190 1190 X mm 365 365 365 365 365 365 365 365 365 365 365 365 365 365 365 OPERATING BRAKE Electric ELECTRICAL EQUIPMENT ELECTRIC MOTORS Traction motor kw 0,5 0,5 0,5 0,5 0,5 0,5 0,7 0,7 0,7 0,7 0,7 0,7 0,7 0,7 0,7 Lifting motor kw 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 SPEED CONTROL Electric BATTERY Traction(T)/starter (S) type S S S T T T S S S T T T T T T Voltage V 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 Capacity Ah 74 74 74 70* 70* 70* 92 92 92 110** 110** 110** 100*** 100*** 100*** Endurance h 3 3 3 3 3 3 3 3 3 5 5 5 5 5 5 Weight kg 36 36 36 60 60 60 44 44 44 78 78 78 80 80 80 CHARGER V-A 24-13 24-13 24-13 24-14 24-14 24-14 24-20 24-20 24-20 24-20 24-20 24-20 24-14 24-14 24-14 GX 12/25 PLUS GX 12/29 PLUS GX 12/35 PLUS GX 12/25 GEL GX 12/29 GEL GX 12/35 GEL G=Rubber, P=Polyurethane * Battery capacity of 90 Ah in 20 hours rating - ** Battery capacity of 132 Ah in 20 hours rating - *** Battery capacity of 125 Ah in 20 hours rating POLYURETHANE DRIVING WHEEL RING CODE GX 10 CODE GX 12 DOUBLE LIFTING COMMAND CODE ACCESSORIES HZ000S00004 HZ000S00005 HZ000S00006 The producer reserves the right to introduce changes to models and features without prior notice. 33
STACKERS GX and TX STRADDLE Versatility for Larger Loads The Straddle Series, which is available in five versions fitted with MOSFET technology (GX series), is highly versatile when dealing with different size loads. These versions are fitted with gel batteries that will not possibly loose any battery fluid meaning that no maintenance is necessary and suitable for all applications where high hygienic standards are required (chemical, pharmaceutical and food & beverage industries). Batteries and battery charger built in Available with a double fork lifting command (GX series) 12 months warranty Tiller handle and controlls Large butterfly control allows accurate speed and direction control. Battery discharge indicator. Safety button and horn are located on the top of the tiller head. Handle bar made of cubic iron sheet. The strong and easily removable plastic cover allows simple access to the inside parts for easier maintenance. 34
STACKERS GX and TX STRADDLE CODE HA310010 HC512010 HC712010 - HC512110 HC712110 - HC512310 HC712310 - CODE UK HA310701 HC512710 HC712710 HCD12710 HC512810 HC712810 HCD12810 HC512910 HC712910 HCD12910 MODEL TX 10/16 GX 12/25 GX 12/35 GX 12/38 GX 12/25 PLUS GX 12/35 PLUS GX 12/38 PLUS GX 12/25 GEL GX 12/35 GEL GX 12/38 GEL STRADDLE STRADDLE STRADDLE STRADDLE STRADDLE STRADDLE STRADDLE STRADDLE STRADDLE STRADDLE CAPACITY Q Nominal load kg 1000 1200 1200 1200 1200 1200 1200 1200 1200 1200 CENTER OF GRAVITY C Distance mm 600 600 600 600 600 600 600 600 600 600 DRIVING SYSTEM Escort DIMENSIONS ELEVATION h3 Elevation mm 1550 2450 3450 3750 2450 3450 3750 2450 3450 3750 h2 Normal free elevation mm 1415-80 80-80 80-80 80 LENGTH l Fork length mm 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 nxs1 Fork width x thickness mm 100X35 100X35 100X35 100X35 100X35 100X35 100X35 100X35 100X35 100X35 DIMENSIONS L Total length mm 1640 1715 1715 1715 1715 1715 1715 1715 1715 1715 L2 Steer unit length mm 640 715 715 715 715 715 715 715 715 715 B Width mm 750 850 850 850 850 850 850 850 850 850 h1 Minimum dimensions mm 1970 1780 2250 2427 1780 2250 2427 1780 2250 2427 A Fork regolation (min/max) mm 230-790 230-790 230-790 230-790 230-790 230-790 230-790 230-790 230-790 230-790 B1 Maximum dimensions (min/max) mm 1197-1504 1197-1504 1197-1504 1197-1504 1197-1504 1197-1504 1197-1504 1197-1504 1197-1504 1197-1504 B2 Useful width for pallets (min/max) mm 963-1270 963-1270 963-1270 963-1270 963-1270 963-1270 963-1270 963-1270 963-1270 963-1270 h4 Maximum dimensions mm 2070 2985 3915 4310 2985 3915 4310 2985 3915 4310 TURNINGS RADIUS Wa mm 1790 1460 1460 1460 1460 1460 1460 1460 1460 1460 STOWAGE PASSAGE Ast 800x1200 mm 2400 2116 2116 2116 2116 2116 2116 2116 2116 2116 PERFORMANCES SPEED Translation with/without load km/h - 4,0 / 5,0 4,0 / 5,0 4,0 / 5,0 4,0 / 5,0 4,0 / 5,0 4,0 / 5,0 4,0 / 5,0 4,0 / 5,0 4,0 / 5,0 Lifting with/without load m/s 0,09 / 0,12 0,07 / 0,10 0,07 / 0,10 0,07 / 0,10 0,07 / 0,10 0,07 / 0,10 0,07 / 0,10 0,07 / 0,10 0,07 / 0,10 0,07 / 0,10 Descent with/without load m/s 0,4 / 0,1 0,4 / 0,1 0,4 / 0,1 0,4 / 0,1 0,4 / 0,1 0,4 / 0,1 0,4 / 0,1 0,4 / 0,1 0,4 / 0,1 0,4 / 0,1 MAX SUPERABLE GRADIENT With/without load % - 5 / 10 5 / 10 5 / 10 5 / 10 5 / 10 5 / 10 5 / 10 5 / 10 5 / 10 WEIGHTS EMPTY WEIGHT With battery kg 415 570 620 670 604 654 704 606 656 706 AXLE LOADING With load (driver/load) kg 453 / 962 584 / 1186 619 / 1201 658/1212 608 / 1196 643 / 1211 682/1222 606/1200 641/1215 680/1226 Without load (driver/load) kg 270 / 145 382 / 188 428 / 192 466/204 406 / 198 452 / 202 490/214 404/202 450/206 488/218 FRAME WHEELS Driver side/load Nr 2/2 2+1 M/2 2+1 M/2 2+1 M/4 2+1 M/2 2+1 M/2 2+1 M/4 2+1 M/2 2+1 M/2 2+1 M/4 TYRES Driver side/load G / N P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P Drive wheel dimensions mmø - 250X76 250X76 250X76 250X76 250X76 250X76 250X76 250X76 250X76 Stabilizer wheels dimensions mmø 200X50 150X40 150X40 150X40 150X40 150X40 150X40 150X40 150X40 150X40 Load side dimensions mmø 82X70 82X70 82X70 82X70 82X70 82X70 82X70 82X70 82X70 82X70 WHEELS BASE Y Back/Front mm 1130 1190 1190 1190 1190 1190 1190 1190 1190 1190 X mm 246 255 255 255 255 255 255 255 255 255 OPERATING BRAKE Mechanic(M) / Electric(E) M E E E E E E E E E ELECTRICAL EQUIPMENT ELECTRIC MOTORS Traction motor kw - 0,7 0,7 0,7 0,7 0,7 0,7 0,7 0,7 0,7 Lifting motor kw 1,6 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 SPEED CONTROL Electtronic type - BATTERY Traction(T) / starter(s) S S S T T T T T T T Voltage/capacity V/Ah 12 / 74 2X12 / 92 2X12 / 92 2X12 / 92 2X12 / 110* 2X12 / 110* 2X12 / 110* 2X12 / 100** 2X12 / 100** 2X12 / 100** Endurance h - 3 3 3 5 5 5 5 5 5 Weight kg 18 44 44 44 78 78 78 80 80 80 CHARGER V-A 12-15 24-20 24-20 24-20 24-20 24-20 24-20 24-14 24-14 24-14 G=Rubber, P=Polyurethane * Battery capacity of 132 Ah in 20 hours rating - ** Battery capacity of 125 Ah in 20 hours rating ACCESSORIES POLYURETHANE DRIVING WHEEL RING CODE GX 12 HZ000S00005 DOUBLE LIFTING COMMAND CODE GX12 HZ000S00006 The producer reserves the right to introduce changes to models and features without prior notice. 35
STACKERS FX An efficient solution The new FX series represents the efficient solution to satisfy all possible warehousing and handling requirements. The separated excited traction technology (SEM) guarantees constant speed with or without load, while the MOSFET transistor is used to regulate control traction and allows smooth and progressive control. Available with a double fork lifting command 12 months warranty Tiller head and controls Large butterfly control allows accurate speed and direction control. Hour meter and battery discharge indicators. Safety button and horn are located on the top of the tiller head Handle bar made of cubic iron sheet. The strong and easily removable plastic cover allows simple access to the inside parts for easier maintenance. In addition to the upper cover, the battery housing can be accessed by removing the side cover, allowing easier battery changing. Sideways Battery Exit Battery charger connector This allows the operator to disconnect the machine from the battery, and connect it to an external battery charger. 36
STACKERS FX CODE HE612000 HE712000 HED12000 MODEL FX 12/29 FX 12/35 FX 12/38 CAPACITY Q Nominal load Kg 1200 1200 1200 CENTER OF GRAVITY C Distance mm 600 600 600 DRIVING SYSTEM Escort DIMENSIONS ELEVATION h3 Elevation mm 2900 3500 3850 h2 Normal free elevation mm - 80 80 LENGTH l Fork length mm 1150 1150 1150 nxs1 Fork width x thickness mm 150X70 150X70 150X70 DIMENSIONS L Total length (+footplate raised/lowered) mm 1957 (2042/2453) 1957 (2042/2453) 1957 (2042/2453) L2 Steer unit length (+footplate raised/lowered) mm 807 (892/1303) 807 (892/1303) 807 (892/1303) B Width mm 850 850 850 h1 Minimum dimensions mm 1980 2250 2425 h4 Maximum dimensions mm 3385 3915 4270 TURNINGS RADIUS Wa (+footplate raised/lowered) mm 1586 (1639/2096) 1586 (1639/2096) 1586 (1639/2096) STOWAGE PASSAGE Ast 800x1200 (+footplate raised/lowered) mm 2228 (2301/2712) 2228 (2301/2712) 2228 (2301/2712) PERFORMANCES SPEED Translation with/without load km/h 5,5/6 5,5/6 5,5/6 Lifting with/without load m/s 0,11/0,17 0,11/0,17 0,11/0,17 Descent with/without load m/s 0,4/0,1 0,4/0,1 0,4/0,1 MAX SUPERABLE GRADIENT With/without load % 5/10 5/10 5/10 WEIGHTS EMPTY WEIGHT With battery 180 Ah kg 717 760 770 AXLE LOADING With load (driver/load) kg 665 / 1252 694 / 1266 701 / 1269 Without load (driver/load) kg 502 / 215 531 / 229 538 / 232 FRAME WHEELS Driver side/load Nr 2+1 M/2 2+1 M/2 2+1 M/2 TYRES Driver side/load * P+G/P P+G/P P+G/P Drive wheel dimensions mmø 250X76 250X76 250X76 Stabilizer wheels dimensions mmø 125X50 125X50 125X50 Load side dimensions mmø 82X70 82X70 82X70 WHEELS BASE Y Back/Front mm 1363 1363 1363 X mm 365 365 365 OPERATING BRAKE Electric type ELECTRICAL EQUIPMENT ELECTRIC MOTORS Traction motor kw 1,2 1,2 1,2 Lifting motor kw 2,5 2,5 2,5 SPEED CONTROL Electronic type BATTERY Traction type Voltage/capacity V/Ah 24/180-315 24/180-315 24/180-315 Weight (min-max) kg 200-285 200-285 200-285 * G=Rubber, P=Polyurethane Available with carved driving wheel ring ACCESSORIES BATTERIES CODE HY000A00000 HY000A00001 HY000A00002 TYPE V-Ah 24-180 24-210 24-315 ENDURANCE h 6 8 10 WEIGHT Kg 200 215 285 RADDRIZZATORI CODE EY000A00004 HY000A00005 HY000A00003 CODE UK EY000A00005 HY000A00006 HY000A00004 TYPE V-A 24-30 24-40 24-50 FOOTPLATE CODE DOUBLE LIFTING COMMAND CODE POLYURETHANE DRIVING WHEEL RING CODE FX 12 OPTIONALS HZ000S00001 HZ000S00000 HZ000S00002 The producer reserves the right to introduce changes to models and features without prior notice. 37
STACKERS LX Power and Control The LX series of stackers offers a huge range of equipment for the professional looking for quality and added value. Designed to be utilised in professional applications in warehouse and handling, these machines come fitted with many standard features, with many further options available such as the MOSFET transistor control and a SEM drive motor. Available with a double fork lifting command 12 months warranty Tiller head and controls Large butterfly control allows accurate speed and direction control. Hour meter and battery discharge indicators. Safety button and horn are located on the top of the tiller head. Handle bar made of cubic iron sheet. The strong and easily removable plastic cover allows simple access to the inside parts for easier maintenance. The two pistons make operator use simple, with excellent visibility for manoeuvring and a lift height of 4500mm (Triplex version). Lateral lifting pistons Sideways Battery Exit In addition to the upper cover, the battery housing can be accessed by removing the side cover, allowing easier battery changing. 38
STACKERS LX CODE HD312000 HD512000 HD612000 HD712000 HDB14000 HD316000 HD516000 HD616000 HD716000 MODEL LX 12/16 LX 12/25 LX 12/29 LX 12/35 LX 14/45 LX 16/16 LX 16/25 LX 16/29 LX 16/35 CAPACITY Q Nominal load Kg 1200 1200 1200 1200 1400 1600 1600 1600 1600 CENTER OF GRAVITY C Distance mm 600 600 600 600 600 600 600 600 600 DRIVING SYSTEM Escort DIMENSIONS ELEVATION h3 Elevation mm 1600 2500 2900 3500 4500 1600 2500 2900 3500 h2 Normal free elevation mm 1510 - - - - 1510 - - - LENGTH l Fork length mm 1150 1150 1150 1150 1150 1150 1150 1150 1150 nxs1 Fork width x thickness mm 150X70 150X70 150X70 150X70 170X70 170X70 170X70 170X70 170X70 DIMENSIONS L Total length mm 1964 1964 1964 1964 2001 1991 1991 1991 1991 Total length +footplate raised/lowered mm 2056/2467 2056/2467 2056/2467 2056/2467 2093/2504 2083/2494 2083/2494 2083/2494 2083/2494 L2 Steer unit length mm 809 809 809 809 851 841 841 841 841 Steer unit length +footplate raised/lowered mm 901/1312 901/1312 901/1312 901/1312 943/1354 933/1344 933/1344 933/1344 933/1344 B Width mm 850 850 850 850 850 850 850 850 850 h1 Minimum dimensions mm 1965 1765 1965 2265 2099 1965 1765 1965 2265 h4 Maximum dimensions mm 1965 2970 3370 3970 5039 1965 2970 3370 3970 TURNINGS RADIUS Wa mm 1586 1586 1586 1586 1649 1649 1649 1649 1649 +footplate raised/lowered mm 1639/2096 1639/2096 1639/2096 1639/2096 1702/2159 1702/2169 1702/2169 1702/2169 1702/2169 STOWAGE PASSAGE Ast 800x1200 mm 2228 2228 2228 2228 2252 2241 2241 2241 2241 800x1200 +footplate raised/lowered mm 2301/2712 2301/2712 2301/2712 2301/2712 2325/2736 2314/2725 2314/2725 2314/2725 2314/2725 PERFORMANCES SPEED Translation with/without load km/h 5,5/6 5,5/6 5,5/6 5,5/6 5,5/6 5,5/6 5,5/6 5,5/6 5,5/6 Lifting with/without load m/s 0,09/0,15 0,09/0,15 0,09/0,15 0,09/0,15 0,13/0,17 0,08/0,12 0,08/0,12 0,08/0,12 0,08/0,12 Descent with/without load m/s 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 0,4/0,1 MAX SUPERABLE GRADIENT With/without load % 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 WEIGHTS EMPTY WEIGHT With battery 180 Ah kg 650 725 780 790 1010 754 849 874 914 AXLE LOADING With load (driver/load) kg 618/1232 666/1259 683/1267 709/1281 881/1529 765/1570 806/1624 828/1627 834/1661 Without load (driver/load) kg 445/205 493/232 510/240 536/254 671/339 502/233 566/264 588/267 594/301 FRAME WHEELS Driver side/load Nr 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/2 2+1 M/4 2+1 M/4 2+1 M/4 2+1 M/4 2+1 M/4 TYRES Driver side/load * P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P P+G/P Drive wheel dimensions mmø 250X76 250X76 250X76 250X76 250X101 250X101 250X101 250X101 250X101 Stabilizer wheels dimensions mmø 125X50 125X50 125X50 125X50 125X50 125X50 125X50 125X50 125X50 Load side dimensions mmø 82X70 82X70 82X70 82X70 82X70 82X70 82X70 82X70 82X70 WHEELS BASE Y Back/Front mm 1363 1363 1363 1363 1429 1429 1429 1429 1429 X mm 371 371 371 371 353 332 332 332 332 OPERATING BRAKE Electric type ELECTRICAL EQUIPMENT ELECTRIC MOTORS Traction motor kw 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 Lifting motor kw 2,5 2,5 2,5 2,5 3,0 2,5 2,5 2,5 2,5 SPEED CONTROL Electronic type BATTERY Traction type Voltage/capacity V/Ah 24/180-315 24/180-315 24/180-315 24/180-315 24/180-315 24/180-315 24/180-315 24/180-315 24/180-315 Weight (min-max) kg 200-285 200-285 200-285 200-285 200-285 200-285 200-285 200-285 200-285 * G=Rubber, P=Polyurethane Available with carved driving wheel ring ACCESSORIES BATTERIES CODE HY000A00000 HY000A00001 HY000A00002 TYPE V-Ah 24-180 24-210 24-315 ENDURANCE h 6 8 10 WEIGHT Kg 200 215 285 CHARGERS CODE EY000A00004 HY000A00005 HY000A00003 CODE UK EY000A00005 HY000A00006 HY000A00004 TYPE V-A 24-30 24-40 24-50 FOOTPLATE CODE DOUBLE LIFTING COMMAND CODE POLYURETHANE DRIVING WHEEL RING CODE LX 12 CODE LX 16 - LX 14 OPTIONALS HZ000S00001 HZ000S00000 HZ000S00002 HZ000S00003 The producer reserves the right to introduce changes to models and features without prior notice. 39
STACKERS LX14 FREE LIFT Designed for Endurance A machine designed to satisfy the demands of handling and warehousing professionals. Besides the remarkable lift height of 4.5m, the upgraded motor (3kW), the MOSFET transistor control and the SEM drive motor typical of the standard version (LX14/45), this new version is fitted with a full free lift of 1.6m. Available with a double fork lifting command 12 months warranty Tiller head and controls Large dimensioned Butterfly button control both direction and speed travel. Double lifting command placed on both the side of the handle. Hour meter and battery discharge indicators. Safety push button + horn are located on top of the tiller head. Starter key. Handle bar made of box-shaped iron sheet. This system allow the operator to raise the fork to a height of 1600mm from the ground, without increasing the minimum dimension of the machine (h1). Full Free Lift Battery charger connector This allows the operator to disconnect the machine from the battery, and connect it to an external battery charger. 40
STACKERS LX14 FREE LIFT CODE HDB14030 MODEL LX 14/45 FREE LIFT CAPACITY Q Nominal load Kg 1400 CENTER OF GRAVITY C Distance mm 600 DRIVING SYSTEM Escort DIMENSIONS ELEVATION h3 Elevation mm 4500 h2 Normal free elevation mm 1510 LENGTH l Fork length mm 1150 nxs1 Fork width x thickness mm 170X70 DIMENSIONS L Total length (+footplate raised/lowered) mm 2001 (2093/2504) L2 Steer unit length (+footplate raised/lowered) mm 851 (943/1354) B Width mm 850 h1 Minimum dimensions mm 2122 h4 Maximum dimensions mm 5062 TURNINGS RADIUS Wa (+footplate raised/lowered) mm 1649 (1702/2159) STOWAGE PASSAGE Ast 800x1200 (+footplate raised/lowered) mm 2252 (2325/2736) PERFORMANCES SPEED Translation with/without load km/h 5,5/6 Lifting with/without load m/s 0,12/0,17 Descent with/without load m/s 0,4/0,1 MAX SUPERABLE GRADIENT With/without load % 5/10 WEIGHTS EMPTY WEIGHT With battery 180 Ah kg 1069 AXLE LOADING With load (driver/load) kg 919/1550 Without load (driver/load) kg 725/344 FRAME WHEELS Driver side/load Nr 2+1 M/4 TYRES Driver side/load * P+G/P Drive wheel dimensions mmø 250X101 Stabilizer wheels dimensions mmø 125X50 Load side dimensions mmø 82X70 WHEELS BASE Y Back/Front mm 1429 X mm 353 OPERATING BRAKE Electric type ELECTRICAL EQUIPMENT ELECTRIC MOTORS Traction motor kw 1,2 Lifting motor kw 3,0 SPEED CONTROL Electronic type BATTERY Traction type Voltage/capacity V/Ah 24/180-315 Weight (min-max) kg 200-285 * G=Rubber, P=Polyurethane Available with carved driving wheel ring ACCESSORIES BATTERIES CODE HY000A00000 HY000A00001 HY000A00002 TYPE V-Ah 24-180 24-210 24-315 ENDURANCE h 6 8 10 WEIGHT Kg 200 215 285 CHARGERS CODE EY000A00004 HY000A00005 HY000A00003 CODE UK EY000A00005 HY000A00006 HY000A00004 TYPE V-A 24-30 24-40 24-50 FOOTPLATE CODE DOUBLE LIFTING COMMAND CODE POLYURETHANE DRIVING WHEEL RING CODE OPTIONALS HZ000S00001 HZ000S00000 HZ000S00003 The producer reserves the right to introduce changes to models and features without prior notice. 41
STACKERS RESIDUAL LIFTING CAPACITY IN KG Model\h3* 900 1000 1200 1600 2000 2500 2900 3500 3750 3850 4000 4500 MX 510-500 - - - - - - - - - - MX 516 - - - 500 - - - - - - - - MX 1016 - - - 1000 - - - - - - - - TX 10/09 1000 - - - - - - - - - - - TX 10/16 - - - 1000 - - - - - - - - TX 10/20 - - - - 1000 - - - - - - - TX 12/25 - - - - - 1200 - - - - - - TX 12/29 - - - - - 1200 800 - - - - - TX 12/35 - - - - - 1200 800 600 - - - - GX 10/09 1000 - - - - - - - - - - - GX 10/16 - - - 1000 - - - - - - - - GX 10/20 - - - - 1000 - - - - - - - GX 12/25 - - - - - 1200 - - - - - - GX 12/29 - - - - - 1200 800 - - - - - GX 12/35 - - - - - 1200 800 600 - - - - FX 12/29 - - - - - 1200 1100 - - - - - FX 12/35 - - - - - 1200 1100 800 - - - - FX 12/38 - - - - - 1200 1100 800-700 - - LX 12/16 - - - 1200 - - - - - - - - LX 12/25 - - - - - 1200 - - LX 12/29 - - - - - 1200 1100 - - - - - LX 12/35 - - - - - 1200 1100 800 - - - - LX 14/45 - - - - - - 1400 1200 - - 1000 800 LX 14/45 Free Lift - - - - - - 1400 1200 - - 1000 800 LX 16/16 - - - 1600 - - - - - - - - LX 16/25 - - - - - 1600 - - - - - - LX 16/29 - - - - - 1600 1300 - - - - - LX 16/35 - - - - - 1600 1300 1000 - - - - TX 10/16 straddle - - - 1000 - - - - - - - - GX 12/25 straddle - - - - - 1200 - - - - - - GX 12/35 straddle - - - - - - - 1200 - - - - GX 12/38 straddle - - - - - - - - 1200 - - - *h3: Altezza di sollevamento (in mm) Baricentro C= 600mm 42
H A N D L I N G S Y S T E M S SPECIAL SOLUTIONS Handling customised solutions Further to the standard production, PRAMAC presents the flexibility of a special line to develop tailored solutions to meet your special requirements. 43
WWW.PRAMAC.COM milc 2006 PRAMAC S.p.A. Headquarters Località Il Piano, 53031 Casole d Elsa (SI) - Italy info@pramac.com service.it@pramac.com Tel.: +39 0577 9651 Fax: +39 0577 949076 PRAMAC LIFTER GmbH Salierstr. 48, 70736 Fellbach, Stuttgart - Germany deutschland@pramac.com service.de@pramac.com Tel.: +49 711 517 4290 Fax: +49 711 517 42999 PRAMAC IBERICA S.A. Parque Empresarial Polaris C/. Mario Campinoti, 1 Autovía Murcia-San Javier Km 18 30591 Balsicas, Murcia - Spain spain@pramac.com service.es@pramac.com Tel.: +34 968 334 900 Fax: +34 968 579 321 PRAMAC UK Ltd. Crown Business Park, Dukestown Tredegar, NP22 4EF - United Kingdom uk@pramac.com service.uk@pramac.com Tel.: +44 1495 713 300 Fax: +44 1495 718 766 PRAMAC FRANCE S.A.S. Place Léonard de Vinci 42190 St. Nizier sous Charlieu - France france@pramac.com service.fr@pramac.com Tel.: +33 (0) 477 692 020 Fax: +33 (0) 477 601 778 S.C. PRAMAC Group SRL Vasile Milea Boulevard No 2 I, floor 2, flat 5, district 6 Bucarest, Romania romania@pramac.com service.ro@pramac.com Tel.: +40 21 300 1341 Fax: +40 21 300 1340 Service and Parts PRAMAC Service and Parts is the Division responsible for fulfilling Parts and Service requests from our customers. Our intention is to provide a comprehensive and highly professional service, to satisfy any requirements, backed up with a great range of components. For information about the nearest Pramac Service and Parts Centre: Web Site: www.pramacparts.com PRAMAC GROUP SCANDINAVIA ApS. Vesterballevej 17-7000 Fredericia - Denmark scandinavia@pramac.com service.dk@pramac.com Tel.: +45 7027 5050 Fax: +45 7027 5060 PRAMAC LIFTER AFRIQUE Tr. S.a.r.l. 24 Rue Félix Eboué - B.P. 8959 Dakar Yoff - Senegal afrique@pramac.com service.af@pramac.com Tel.: +221 849 6232 Fax: +221 822 5800 PRAMAC INDUSTRIES Inc. Regional Head Office and USA Sales Office 1100 Cobb Parkway North C Marietta, Georgia 30062 - USA usa@pramac.com service@pramac.com Tel.: +1 770 218 5430 Fax: +1 770 218 2810 International Sales Office 10100 NW 116 Way, Suite 10 Medley, Florida 33178 - USA usa@pramac.com service@pramac.com Tel.: +1 305 888 9911 Fax: +1 305 888 3711 PRAMAC CARIBE C. por A. Avda. 27 de Febrero, Esq. Caonabo, 664 Los Restauradores 10137 Santo Domingo - Dominican Republic s.domingo@pramac.com service.rd@pramac.com Tel.: +1 809 531 0067 Fax: +1 809 531 0273 PRAMAC de Puerto Rico Inc. Carretera Estatal #2 Km, 15.8 Barrio Hato Tejas, Bayamón, 00961 Puerto Rico info@pramacpr.com parts@pramacpr.com Tel.: +1 787 273 3178 Fax: +1 787 273 3179 Authorised dealer PRAMAC BRASIL EQUIPAMENTOS Ltda. Av. Victor Andrews, 3210 Bairro Éden - Cep 18086-390 Sorocaba, Sao Paulo - Brasil brasil@pramac.com service.br@pramac.com Tel: +55 15 3225 4415 Fax: +55 15 3225 3852 PRAMAC (CHINA) LIMITED Hong Kong Regional Head Office Unit 721, 7th Floor Nan Fung Commercial Centre 19 Lam Lok Street, Kowloon Bay - Hong Kong asia@pramac.com service.hk@pramac.com Tel.: +852 211 638 89 Fax: +852 211 998 22 PRAMAC SIENA (SHANGHAI) TRADING CO. LTD. Unit K, 23/F, Cross Region Plaza No 899 Lingling Road, Shanghai 200030 - China asia@pramac.com service.hk@pramac.com Tel.: +86 21 5489 3311 Fax: +86 21 5489 3825 PRAMAC (ASIA) PTE LTD. 48 Gul Crescent 629542 Singapore asia@pramac.com service.sg@pramac.com Tel.: +65 6558 7888 Fax: +65 6558 7878 PRAMAC Sp z.o.o. Ul. Miedzyleska 2/4, 50-514 Wroclaw-Poland polska@pramac.com service.pl@pramac.com Tel.: +48 71 332 17-00 Fax: +48 71 332 17-09 Certifications CONFORMS TO THE EUROPEAN SAFETY RULES PRAMAC S.p.A. Località il Piano - 53031 Casole d Elsa (SI) - Italy The producer reserves the right to introduce changes to models and features without prior notice. Models, version associated product characteristics can vary according to the markets. 02-2006 The PRAMAC S.p.A. - ITALY - is the owner of the trademarks PRAMAC Group (logotype and design) and Energy Mover