Particular requirements (apply as applicable to luminaire type) Emergency Escape Lighting and Exit Signs for Buildings

Similar documents
LIST OF PUBLISHED STANDARDS

Spiral T2 10,000 & 8,000 hours

Product Overview. Key Features. (ship.unit) PARATHOM MR ,5 W 2700 K 210 GU mm 50 mm 32 g

SPECIFICATION SHEET CONTOUR SUSPENDED LINEAR SYSTEM. IP40 RATED IRC. 600mm. 1200mm. 1500mm. 1800mm

Datasheet. OSRAM SubstiTUBE Trio 2

DALI 650mA LED Driver

LED T8 BP. GE Lighting. Tubular lamps DATA SHEET. Specification Features. Product information. Applications. IEC standards

INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD

Indicativul și titlul standardului doc.

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

CATALOGUE OF STANDARDS OF CENELEC / TC9X January Documents directly steered by TC 9X 2, 3, 4, 5. Documents steered by CLC / SC 9XA 6, 7

Modular contactor for installation into distribution boards

DALI Switch Mechanisms DCDAL31 Series Installation Instructions

PARATHOM CLASSIC A60 advanced frosted PROMO. Product Overview. Key Features. (ship.unit) E27 60 mm 110

Background information on GRE/2012/44 (EMC) October Proposal for the 05 series of amendments of Regulation No. 10

TECTONIC LED CORP. ISO

TECHNICAL DATA CRI CURRENT

Product Overview. & clear sparkling. Key Features

Lighting Tables for Existing/Base Equipment 4/15/2011

Installation Instructions

Dreamer Series. LED bulb A60. Product benefits. Product features. Product datasheet

Induction lamps and control gear

Table of contents NLE 2 x 36 W T8, 230 V, 4 Ah, 1.5 h 4

DRAFT. Installation Instructions 1693 EV-LEDFIRE-III 1694 EV-LEDFIRE-III-PRO 1697 EV-LEDFIRE-III-PRO-B 1695 EV-LEDFIRE-III-ULT CONTENTS 1.

Ecoglo HYU Hybrid Photoluminescent Exit Signs: Compliance with NZBC F8/AS1

This standard covers the requirements of luminaires for emergency lighting chains. This standard covers safety and performance requirements.

LED T8 Full Glass Tube

SPECIFICATION SHEET ORION ROAD LANTERN. IP66 RATED CRI. 230v /50hz

Reliability with the most essential intellect. Philips HF-Essential Electronic ballasts for TL5 lamps

Prosport LED INTRODUCTION APPLICATION SPECIFICATION PRODUCT SPECIFICATION

Lighting circuits. The different lamp technologies

Luminaires CG-S Eaton. All Rights Reserved.

Product Information. PARATHOM MR & 24 Adv. Product Overview. Benefits. Key Features

Product Description. MASTER TL-D Super 80. Low-pressure mercury discharge lamps with a tubular 26 mm envelope

Amendment to Schedule 15 for Ballasts Electromagnetic & Electronic ballasts

650mA Phase Dimmable LED Driver

Product Description. MASTER TL-D 90 De Luxe. Benefits. Features. Application. Low-pressure mercury discharge lamps with a tubular 26 mm envelope

IP65 FLUO 2X18W 2X36W

THE HIGH STRIP FIXTURE SERIES PERFORMANCE KEY FEATURES INCLUDE:

A7 Magnetic Contact/Switch CONTENTS

SubstiTUBE Value EM T8 (AUS Fighter Tube) ST8V-0.6M ST8V-1.2M ST8V-1.5M

Locations of Reading High School and Reading Middle School Home Athletic Events by Sport (Scroll Down for Directions to Each Venue.

1000mA - 650mA Phase Dimmable LED Driver

and Refrigeration Institute). CNX Special Purpose Contactors

LED 2/3/4ft T8 Tube 120V

Standards, Regulations and Labelling Requirements for Lighting Products Irosha S. Kalugalage

INTERNATIONAL STANDARD

Installation Instructions

An Overview of Automotive EMC Standards & Emerging Requirements

Lighting Tables for Existing/Base Equipment 4/15/2011

A List of Standards Often Used for Designing Electrical Systems and for Specifying Equipment

Switchgear for Luminaires

POWERSTAR HQI -T W Metal halide lamps with quartz technology for enclosed luminaires

T5 versus T8 Fluorescent Lamps. The good, the bad, & the ugly about T8 and T5 lamps

CATALOGUE.

Instruction/Installation Manual

Linear fittings EVNL LED fitting - zones 2, & 22

TECHNICAL DATA CRI. 230v /50hz. EFFICACY WATTAGE Llm/W. EFFICACY WATTAGE Llm/W

Lighting Tables for Existing/Base Equipment 1/1/2014

1992 Energy Policy Act A Pacific Energy Center Factsheet

PIB5 PIB6 PIB7. Pg

ABB i-bus KNX Room Master, MDRC RM/S 4.1, 2CDG R0011

Product Description. TL-D Standard Colours. Low-pressure mercury discharge lamps with a tubular 26 mm envelope

RadioRA 2 Maestro Local Controls

JBE LED2000 INDUSTRIAL SOLUTIONS FOR LED & INCANDESCENT MAINS LIGHTING FLICKER FREE TRAILING EDGE DIMMER

Linear fittings EVTL Weatherproof LED fitting - Industrial applications

LIST OF PUBLISHED STANDARDS

WELLGLASS EV.. Series - H.I.D. well glass lighting fixture. Aluminium with low content of copper. O-ring made of Nitrile Rubber (NBR)

Informal document No. 5 (47th GRE, 1-5 October 2001, agenda item 5.8.)

xxx.1xx xxx.4xx0. AgNi contacts, specifically intended for resistive and slightly inductive loads as well as for motor loads

L I G H T W A V UV Electronic Ballast E 2010

Installation Instructions

IIC wellglass luminaires for low energy, halogen and incandescent lamps flameproof

A R C H I T E C T U R A L LO W L E V E L F LO O D L I G H T S E R I E S

DALI Emergency LED Driver - 350/700/1000mA Constant Current

Product Overview. Product. LED PARATHOM PRO MR16 50 advanced. advanced. advanced. Key Features

OSRAM DULUX L LUMILUX CFLni, with 4-pin 2G11 base for ECG/CCG operation

Lessons Learned in Lighting Equipment Testing in the Philippines

Equipment model: auxiliary control. Pack Cat.Nos 10/16 A V± P + T shuttered module module

Linear fittings EVTL Weatherproof LED fitting - Industrial applications

INDUCTION FLUORESCENT LAMPS are one of the oldest energy saving lighting technologies in

<< CONTENTS MICRO-LYNX LAMPS MINI-LYNX LAMPS LYNX LAMPS TECHNICAL DATA

IMPROVED LIGHTING CONTROLS

Industrial Contactors CTX 3 3P 185A - 800A

PC T8 TEC, W PC TEC

EU RO Mutual Recognition Technical Requirements

Technical specifications

Electrical Systems and Fault Finding

FL ballasts Electronic fixed output PC T8 TEC, W PC TEC T8

FLUORESCENT INDUCTION

Potenza Commercial Pendant Compact Fluorescent, Incandescent, HID Medium, Large

LUMENTON. including poured concrete. Suitable for installation within 4 feet of ground. Product specifications subject to change without notice.

E/ECE/324/Add.5/Rev.6/Amend.2 E/ECE/TRANS/505/Add.5/Rev.6/Amend.2

CCE RR KARNATAKA SECONDARY EDUCATION EXAMINATION BOARD, MALLESWARAM, BANGALORE G È.G È.G È.. Æ fioê, d È 2017

Lighting Tables for New Equipment 7/16/2008

Easy and safe installation

EMC for E-mobility. William Radasky presenting for Jacques Delaballe IEC TC 69 representative in ACEC. APEMC Symposium May 2015

6.1. Lighting Contactors. Contents. Application Description. Product Overview. Open Control

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Transcription:

LUMINAIRES IEC and AS/NZS 60598.1 Luminaires General requirements and tests IEC and AS/NZS 60598.2 Particular requirements (apply as applicable to luminaire type) IEC CISPR 15, EN 55015 and AS/NZS CISPR 15 (requirements align) Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment IEC CISPR TR 30 Test method on electromagnetic emissions from electronic ballasts for single- and double-capped fluorescent lamps AS 2293.3 Emergency Escape Lighting and Exit Signs for Buildings IEC 61547, EN 61547 Equipment for general lighting purposes - EMC immunity requirements IEC, EN, AS/NZS 61000-3-2 Limits for harmonic current emissions (equipment input current 16A per phase) COMPONENTS AS/NZS 4783 part 1 Performance of Electrical Lighting Equipment Ballasts for fluorescent lamps where Part 1 Test method Part 2 Energy labelling and minimum energy performance AS/NZS 4879 part 1 ELV Transformers Energy Performance of transformers and electronic step-down convertors for ELV lamps AS/NZS 4847 part 1 Self-ballasted lamps for general lighting services - Minimum Energy Performance Standards (MEPS) requirements AS NZS 4934 part 1 Incandescent lamps for general lighting services - Test methods - Energy performance IEC and AS/NZS 60155 Glow-starters for Fluorescent Lamps IEC and AS/NZS 60921 Ballasts for Tubular Fluorescent Lamps IEC and AS/NZS 60922 Ballasts for discharge lamps (excluding tubular fluorescent lamps) 10.9 IEC and AS/NZS 60923 Ballasts for discharge lamps (excluding tubular fluorescent lamps)

IEC and AS/NZS 60925 DC Supplied Electronic Ballasts for Tubular Fluorescent Lamps IEC and AS/NZS 60927 Starting devices other than glow-starters) IEC and AS/NZS 60928 AC supplied electronic ballasts for tubular fluorescent lamps IEC and AS/NZS 60929 AC supplied electronic ballasts for tubular fluorescent lamps IEC and AS/NZS 61046 Auxiliaries for lamps DC and AC supplied electronic step down converters for filament lamps IEC and AS/NZS 61047 DC and AC supplied electronic step down converters for filament lamps IEC and AS/NZS 61048 Capacitors for use in tubular fluorescent and other discharge lamp circuits IEC and AS/NZS 61049 Capacitors for use in tubular fluorescent and other discharge lamp circuits IEC and AS/NZS 61347.1 (IEC 61347-1:2000, MOD) (apply as applicable to control gear type) IEC and AS/NZS 61347.2.1 Particular requirements for starting devices (other than glow starters) IEC and AS/NZS 61347.2.2 Particular requirements for DC or AC supplied electronic step-down convertors for filament lamps (IEC 61347-2-2, Ed. 1.2 (2006) MOD) IEC and AS/NZS 61347.2.3 Particular requirements for AC supplied electronic ballasts for fluorescent lamps IEC and AS/NZS 61347.2.4 Withdrawn at IEC and is being withdrawn by AS/NZS. Replaced by IEC 61347-2-3 Particular requirements for DC supplied electronic ballasts for general lighting 10.10 EC and AS/NZS 61347.2.5 Withdrawn at IEC and is being withdrawn by AS/NZS. Replaced by IEC 61347-2-3 Particular requirements for DC supplied electronic ballasts for public transport lighting

IEC and AS/NZS 61347.2.6 Withdrawn at IEC and is being withdrawn by AS/NZS. Replaced by IEC 61347-2-3 Particular requirements for DC supplied electronic ballasts for aircraft lighting IEC 61347.2.7 Particular requirements for DC supplied electronic ballasts for Emergency lighting IEC and AS/NZS 61347.2.8 Particular requirements for ballasts for fluorescent lamps (IEC 61347-2-8:2000, MOD) IEC and AS/NZS 61347.2.9 Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) (IEC61347-2-9:2000 MOD) IEC and AS/NZS 61347.2.13 Part 2-13: Particular requirements for DC or AC supplied electronic control gear for LED modules IEC and AS/NZS 61558.1 Safety of Power Transformers, Power Supplies, Reactors and Similar Products General requirements and test (IEC 61558-1 Ed 2, MOD) IEC and AS/NZS 61558.2 Safety of Power Transformers, Power Supply Units and Similar Products Particular requirements 10.11

APPLICATION AS/NZS 1158.0 Introduction AS/NZS 1158.1.1 Vehicular Traffic (Category V) Lighting Performance and design requirements AS/NZS 1158.1.2 Vehicular traffic (Category V) lighting Guide to design, installation, operation and maintenance AS/NZS 1158.2 Computer procedures for the calculation of light technical parameters for Category V and Category P lighting AS/NZS 1158.3.1 Pedestrian area (Category P) lighting Performance and design requirements AS/NZS 1158.4 Lighting of pedestrian crossings AS/NZS 1158.6 Part 6: Luminaires AS/NZS 1680.0 Safe movement (Referenced by ABCB National Construction Code) AS/NZS 1680.1 General principles and recommendations 10.12

AS/NZS 1680.2.1 Circulation spaces and other general areas AS/NZS 1680.2.2 Office and screen-based tasks AS/NZS 1680.2.3 Educational and training facilities AS/NZS 1680.2.4 Industrial tasks and processes AS/NZS 1680.2.5 Hospital and medical tasks AS 1680.3 Measurement, calculation and presentation of photometric data AS/NZS 1680.4 Maintenance of electrical lighting systems AS/NZS 1680.5 Outdoor workplace lighting AS 2293.1 Emergency Escape Lighting and Exit signs for Buildings System design, installation and operation (Referenced by ABCB National Construction Code) AS/NZS 2293.2 Emergency Evacuation Lighting for Buildings Inspection and maintenance AS 2560.1 General principles AS 2560.2.1 Lighting for outdoor tennis AS 2560.2.2 Guide to Lighting of multipurpose indoor sports centres AS 2560.2.3 Lighting for football (all codes) 10.13 AS 2560.2.4 Guide to Lighting for outdoor netball and basketball

AS 2560.2.5 Swimming pools AS 2560.2.6 Guide to Baseball and softball AS 2560.2.7 Guide to Outdoor hockey AS 2560.2.8 Outdoor bowling greens AS 4282 Control of the obtrusive effects of outdoor lighting 10.14