Poppet Valves 750 Series Keeping the World Flowing
Contents Section Page Introduction 750 Series Poppet Valve Pilot operated 4 /4 to / Pilot operated 5 /4 to Pilot operated 6 Pilot operated 7 /4 to / Pilot solenoid operated 8 /4 to / Pilot solenoid operated 9 /4 to Pilot solenoid operated 0 /4 to Pilot solenoid operated Solenoid operators for use with pilot solenoid poppet valves Solenoid specifications Plunger or roller lever operated 4 / Plunger operated spring-return 5 Rotork Midland 6 Rotork Instruments 6 Rotork Site Services Service and Support 7 Rotork is the global market leader in valve automation and flow control. Our products and services are helping organisations around the world to improve efficiency, assure safety and protect the environment. We strive always for technical excellence, innovation and the highest quality standards in everything we do. As a result, our people and products remain at the forefront of flow control technology. Uncompromising reliability is a feature of our entire product range, from our flagship electric actuator range through to our pneumatic, hydraulic and electro-hydraulic actuators, as well as instruments, gearboxes and valve accessories. Rotork is committed to providing first class support to each client throughout the whole life of their plant, from initial site surveys to installation, maintenance, audits and repair. From our network of national and international offices, our engineers work around the clock to maintain our position of trust. Rotork. Keeping the world flowing. Poppet Valves
Introduction A range of / pilot operated poppet valves in stainless steel 6L for use on gases. Specifically designed for harsh environments, designed for actuator control. Rotork Midlands' 750 series is available in /4 to NPT port sizes. 6L construction makes this valve range ideal for severe service / hazardous environments. / function for cylinder or actuator control incorporating: Low power consumption Low temperature options High flow rates Relevant industry approvals including SIL Sweet (natural) and sour gases as well as low pressure hydraulic, mineral or water Hazardous protection concepts Keeping the World Flowing
750 Series Poppet Valve Pilot operated A range of / pilot operated poppet valves in stainless steel 6L for use on gases. Features and Benefits Specifically designed for severe environments Ambient temperature range -0 to +80 ºC (-4 to +56 F) 6L stainless steel construction Designed for actuator control Large flow paths (up to 0 Cv) NACE capability option available Working Temperature Range /4 to / -0 to +80 C (-4 to +56 F) & -0 to +80 C (-4 to +76 F) Low temperature option -50 to +80 ºC (-58 to +76 ºF) - available up to When product is ordered as '/ATEX' ambient temperature range is -0 C to +40 C (4 F to +04 F) (T6) (EC Directive 94/9/EC). When product is ordered as '/ATEX' ambient temperature range is -50 C to +40 C (-58 F to +04 F) (T6) (EC Directive 94/9/EC). Working Pressure Up to bar (74 psi) maximum inlet pressure Minimum pilot pressure valve size dependent. Ports NPT (BSP option available) /4 to NPT Pilot ports /8 or /4 (valve size dependent) Operating Media Gases filtered lubricated or non lubricated air, inert gas, sweet (natural) and sour gases Liquids low pressure hydraulic, mineral oil or water (please consult factory) Construction Materials Body & trim: 6L stainless steel Springs: 6 stainless steel Seals: /4 to / fluoroelastomer (standard option) and nitrile (standard option) /4 to " EPDM (low temperature version) Drawings and D models for all valves and solenoid options available on request Product Code Low Temperature Version Size Mass (kg) Max. Flow L/Min Max. Flow SCFM Min. Pilot Pressure Cv 5M-VCB 5M-ECB /4 0.65 6 4 4.0 bar. 5M-VCB 5M-ECB /8 0.9 809 64 4.0 bar.8 45M-VCB 45M-ECB /.5 58 4 4.0 bar.5 65M-SCB 65M-ECB /4 5 804 84 4.0 bar 8 85M-SCB 85M-ECB 5 866 454 4.0 bar 55M-SCB 55M-ECB /4 7650 64 4.0 bar 8 75M-SCB 75M-ECB / 767 804 4.0 bar 95M-SCB 95M-ECB 8.7 5086 797 Maximum flow at 6 bar, with bar differential Minimum pilot pressure at 6. bar body pressure See table on page 7 50 Certification Options Available ATEX 4 Poppet Valves
750 Series Poppet Valve /4 to / Pilot operated A B E D Ports J NPT Pilot Port K NPT OUTLET Mounting Holes ØN L C F G H EXH (N/C) INLET (N/O) M INLET (N/C) EXH (N/O) Ordering Information Product Code Low Temperature Version Size A B C D E F G H J K L M N 5M-VCB 5M-ECB /4 9 44.5 7 54 0 6 /4 /8 5 8 5.5 5M-VCB 5M-ECB /8 9 5 7 54 0 8 /8 /8 40 8 6.5 45M-VCB 45M-ECB / 5 6.5 8 8.5 65 8 45 / /8 50 6 6.5 If ATEX certification is required suffix product code with '/ATEX' / Normally / Diverter Closed / Normally / Changeover Open Keeping the World Flowing 5
750 Series Poppet Valve /4 to Pilot operated A B E D L L Ports H NPT Pilot Port J NPT F G Outlet Mounting Hole ØM K C EXH (N/C) INLET (N/O) INLET (N/C) EXH (N/O) Ordering Information Product Code Low Temperature Version Size A B C D E F G H J K L M 65M-SCB 65M-ECB /4 0 96 6.5 6.5 5 06 /4 /4 0 85M-SCB 85M-ECB 0 96 6.5 6.5 6 6 /4 5 55M-SCB 55M-ECB /4 65 6 76 76 90 80 8 /4 /4 8.5 50 75M-SCB 75M-ECB / 65 6 76 76 90 80 8 / /4 8.5 50 95M-SCB 95M-ECB 9 40 0 0 0 40 /4 8 6 If ATEX certification is required suffix product code with '/ATEX' 6 Poppet Valves
750 Series Poppet Valve Pilot operated 46 70 0 0 70 40 40 - NPT Line Ports Outlet 4 Mounting Holes Ø.0 ¼ NPT Pilot Port 75 85 Exhaust (N/C) Inlet (N/O) Inlet (N/C) Exhaust (N/O) 5 5 5 Optional Mounting Brackets Ordering Information Product Code Size Mass (kg) Low temperature version not available in. If alternative port positions are required consult factory. See examples below. If ATEX certification is required suffix product code with '/ATEX' Max. Flow L/Min Max. Flow SCFM Min. Pilot Pressure Cv C5M-SCB 0 894 954 See below 0 (90 offset ports) Alternative Port Positions Pilot Pressures for " & Poppet Valve Line Pressure (bar) Pilot Pressure (bar) Line Pressure (bar) Pilot Pressure (bar).4. 4.4 5.6 6 4. 7 5 8 5.6 9 6. 0 6.6 7. 7.6 Keeping the World Flowing 7
750 Series Poppet Valve /4 to / Pilot solenoid operated A range of / pilot solenoid operated poppet valves in stainless steel 6L for use on gases. K-TYPE solenoid shown - see solenoid specification chart Features and Benefits Specifically designed for severe environments Ambient temperature range -0 to +80 ºC (-4 to +56 F) (valve only - see solenoid specification chart for details) 6L stainless steel construction Designed for actuator control Large flow paths (up to 0 Cv) NACE capability option available Working Temperature Range /4 to / -0 to +80 C (-4 to +56 F) Low temperature option available -50 C (-58 F) - solenoid fitted (consult factory for product codes) Working Pressure Up to bar (74 psi) maximum inlet pressure Minimum pilot pressure valve size dependent Ports NPT (BSP option available) /4 to / NPT Pilot ports /8 Operating Media Gases filtered lubricated or non-lubricated air, inert gas, sweet (natural) and sour gases - NACE Liquids low pressure hydraulic, mineral oil or water (please consult factory) Construction Materials Body & trim: 6L stainless steel Springs: 6 stainless steel Seals: /4 to / fluoroelastomer /4, /8 and / pilot solenoid poppet valves have internal feed to solenoid, therefore can only be used / normally closed, if normally open or separate pilot supply is required please consult factory Drawings and D models for all valves and solenoid options available on request Product Code * Denotes solenoid type. See page - # Denotes Voltage. See page Maximum Flow at 6 bar, with bar differential Minimum Pilot Pressure at 6. bar body pressure Size Mass (kg) Max.Flow L/Min Max.Flow SCFM Operating Pressure M-VCB*# /4 0.65 +solenoid 6 4 to bar. M-VCB*# /8 0.9 +solenoid 809 64 to bar.8 4M-VCB*# /.5 +solenoid 400 4 to bar.5 Cv Internal Feed to Solenoid / N/C Certification Options Available UL x ATEX 8 Poppet Valves
750 Series Poppet Valve /4 to / Pilot solenoid operated M0 x.5 Cable Entry C AS E D B G F Ports M NPT A - ØK Mounting Holes H Outlet Port J Inlet Port L Exhaust Port Ordering Information Product Code Size A B C D E F G H J K L M M-VCB*# /4 44.5 4 7 54 0 6 5 5.5 8 /4 M-VCB*# /8 5 4 7 54 0 8 40 6.5 8 /8 4M-VCB*# / 6 6.5 8 50.5 65 8 45 50 6.5 6 / * Denotes solenoid type. See page - # Denotes Voltage. See page Keeping the World Flowing 9
750 Series Poppet Valve /4 to Pilot solenoid operated A range of / pilot solenoid operated poppet valves in stainless steel for use on gases. K-TYPE solenoid shown - see solenoid specification chart Features and Benefits Specifically designed for severe environments Ambient temperature range -0 to + 80 ºC (-4 to +76 F) (valve only - see solenoid specification chart for details) 6L stainless steel construction Designed for actuator control Large flow paths (up to 0 Cv) NACE capability option available Working Temperature Range /4 to -0 to +80 C (-4 to +76 F) valve only, see separate table for solenoid ambient temperatures Low temperature option -50 C (-58 F) available for /4 to only (solenoid dependant - consult factory for product code) Fluoroelastomer option +80 C available /4 to / only (consult factory for product code) Working Pressure Up to bar (74 psi) maximum inlet pressure Minimum pilot pressure via solenoid supply port (valve size dependent - see chart) Ports NPT (BSP option available) /4 to NPT Pilot Ports /8 or /4 (valve size dependent) Operating Media Gases filtered lubricated or non-lubricated air, inert gas, sweet (natural) and sour gases - NACE Liquids low pressure hydraulic, mineral oil or water (please consult factory) Construction Materials Body and trim: 6L stainless steel Springs: 6 stainless steel Seals: /4 to Nitrile Drawings and D models for all valves and solenoid options available on request Product Code Size Mass (kg) Max.Flow L/Min Max.Flow SCFM Minimum Solenoid Supply Pressure 65M4-SCB*# /4 5 +solenoid 804 84 4 bar 8 85M4-SCB*# 5 +solenoid 866 454 4 bar 55M4-SCB*# /4 +solenoid 7650 64 4 bar 8 75M4-SCB*# / +solenoid 79 79 4 bar 95M4-SCB*# 8.7 +solenoid 50869 798 4 bar 50 C5M4-SCB*# 0 +solenoid 895 955 7 bar 0 Cv Maximum Flow at 6 bar, with bar differential * Denotes Solenoid Type. See Page - # Denotes Voltage. See Page Separate Supply to solenoid / Normally / Diverter Closed Certification Options Available UL x ATEX / Normally / Changeover Open 0 Poppet Valves
H 750 Series Poppet Valve /4 to Pilot solenoid operated /4 to version D F A G AS Solenoid Supply Port N NPT B C SQ Ports M NPT E Outlet Port ØK Mounting Hole M0 x.5 Cable Entry " version D E A H AS B CSQ J J Inlet N/C Port Outlet N/O Port () L Inlet N/O Port () Outlet N/C Port 4- ØK Mounting Holes Valve Only L F G Ordering Information Product Code Size A B C D E F G H J K L M N 65M4-SCB*# /4 4 96 6.5 5 06 7 60 /4 /4 85M4-SCB*# 4 96 6.5 6 6 7 70 /4 55M4-SCB*# /4 85 6 76 8 90 80 7 8.5 00 /4 /4 75M4-SCB*# / 85 6 76 8 90 80 7 8.5 00 / /4 95M4-SCB*# " 78 40 0 0 40 86 4 8 4 /4 C5M4-SCB*# 55 70 40 40 90 46 5 75 40 / If alternative port positions are required consult factory. * Denotes solenoid type. See page - # Denotes Voltage. See page Keeping the World Flowing
750 Series Poppet Valve Solenoid operators for use with pilot solenoid poppet valves Solenoid Code K&7 Solenoid Code CL Ø77 9 M0 X.5 Cable Entry / NPT Cable Entry 9 40 8.5 /4 - UN M0 X.0 Ø6.5 58 5 Solenoid Code P&T Solenoid Code 4 R 5 80.5 58.0 M0 X.5 Cable Entry 9.5 5 Pg9 Cable Entry 60 7 57.5 6 M0 X.0 DIN 4650B PLUG Voltages Code Voltage C VDC D 4 VDC F 48 VDC M 0 VAC 50/60 Hz S 0 VAC 50 Hz Y 8 VDC Poppet Valves
750 Series Poppet Valve Pilot solenoid operated Solenoid specifications Model Code K 7 CL P T 4 Type of Protection Exd IIC T6 Exd IIC T4 NEMA 7 & 9 Eex me II T4/T5 Eex ia IIC T6 Non-hazardous Approved Area Zones and Zones and Class I, Div, Group C & D. Class II, Div, Groups E, F, & G. Class II, Div, Groups C, D, E, F & G Zones and Zones 0 None Degree of Protection IP67 (NEMA Equivalent: 6) IP67 (NEMA Equivalent: 6) NEMA 4 (IP55) IP66 (NEMA Equivalent: 4X) IP66 (NEMA Equivalent: 4X) IP65 (NEMA Equivalent: 4) Housing 6 Stainless Steel alt Aluminium Epoxy coated 6 Stainless Steel alt Aluminium Epoxy coated Stainless Steel. Coil potted Glass reinforced Polyamid (Stainless Steel conduit hub) Glass reinforced Polyamid Moulded plastic Cable Entry M0 x.5 (Optional /" NPT consult factory for code) M0 x.5 (Optional /" NPT consult factory for code) /" NPT or 4" flying lead M0 x.5 (Optional /" NPT consult factory for code) M0 x.5 (Optional /" NPT consult factory for code) DIN plug Power Consumption AC/DC 5W.4 VA (0 VAC).4 VA (0 VAC) 5 W.4 VA (0 VAC).4 VA (0 VAC).8 W /.8 W 7.5 W (DC). W (4 VDC) 9 W (DC) 9 W (Inrush VA) (AC) Maximum Admissable Surface Temp 85 ºC (85 ºF) 5 ºC (75 ºF) 60 ºC (0 ºF) T4 5 ºC (75 ºF) T5 00 ºC ( ºF) 85 ºC (85 ºF) N/A Maximum Ambient Temperature 40 ºC (04 ºF) 80 ºC (76 ºF) 40 ºC (04 ºF) T4 75 ºC (67 ºF) T5 40 ºC (04 ºF) 65 ºC (49 ºF) 50 ºC ( ºF) Maximum Fluid Temperature 80 ºC (76 ºF) 80 ºC (76 ºF) 05 ºC ( ºF) 75 ºC (67 ºF) 75 ºC (67 ºF) 75 ºC (67 ºF) Solenoid Weight (kg).6.6 0.9 0.6 0.5 0.0 Approved Standard ATEX, CSA, UL, IECEX & EAC ATEX, CSA, UL, IECEX & EAC UL Listed / CSA Certified ATEX, CSA, UL & IECEX ATEX, CSA, UL & IECEX NOTES: The combination of valve and coil will determine maximum ambient i.e. always the lower of the two. T type solenoid only available with 8 VDC coil (Y). Keeping the World Flowing
750 Series Poppet Valve Plunger or roller lever operated A range of / mechanically operated poppet valves for cylinder position detection in stainless steel 6L for use on gases. Features and Benefits Specifically designed for severe environments Ambient temperature range -0 to + 80 ºC 6L stainless steel construction Mechanically operated Limit switch for end of actuator stroke detection NACE capability option available Ambient Temperature Range -0 to +80 ºC (-4 to +76 ºF) When product is ordered as '/ATEX' ambient temperature range is -0 C to +40 C (4 F to +04 F) (T6) (EC Directive 94/9/EC). Working Pressure Up to bar (45 psi) maximum inlet pressure Maximum Flow 40 l/min (4. SCFM) (at 6.0 bar with.0 bar differential) Ports NPT (BSP option available) /8 NPT Operating Media Gases filtered lubricated or non-lubricated air, inert gas, sweet (natural) and sour gases Liquids low pressure hydraulic, mineral oil or water (please consult factory) Construction Materials Body and trim: 6L stainless steel Springs: 6 stainless steel Seals: Nitrile Drawings and D models for all valves and solenoid options available on request Product Code Size Description Mass (kg) Operating Force N lbf M6-SMB /8 Plunger operated, spring-return, N/C 0. 44 9.9 0.6 4M6-SMB /8 Plunger operated, spring-return, N/O 0. 80 8 0.6 M8-SMB /8 Lever roller operated, spring-return, N/C 0.8 0 4.5 0.6 4M8-SMB /8 Lever roller operated, spring-return, N/O 0.9 6 8. 0.6 If ATEX certification is required suffix product code with '/ATEX' Cv /8 Plunger Operated Spring Return N/C /8 Roller Lever Operated Spring Return N/C Certification options available /8 Plunger Operated Spring Return N/O /8 Roller Lever Operated Spring Return N/O ATEX 4 Poppet Valves
750 Series Poppet Valve / Plunger operated spring-return / Plunger operated spring-return 4 5 Total Travel.5 To Operate M4 X 0 DEEP Ø4. THRU EXH 6 6 OUTLET 4 INLET 9 6 44.0 - /8 Line Ports Ø5 5.75. / Roller lever operated spring-return Total Travel 6 To Operate Ø0 77.5 6 5 Keeping the World Flowing 5
Keeping the World Flowing www.rotork.com A full listing of our worldwide sales and service network is available on our website. Rotork Midland Ltd. Patrick Gregory Road Wolverhampton WV DZ, UK tel +44 (0)90 05 678 fax +44 (0)90 05 676 email sales.midland@rotork.com Rotork is a corporate member of the Institute of Asset Management PUB7-006-00 Issue /6 As part of a process of on-going product development, Rotork reserves the right to amend and change specifications without prior notice. Published data may be subject to change. For the very latest version release, visit our website at www.rotork.com The name Rotork is a registered trademark. Rotork recognises all registered trademarks. POWTC6. Published and produced in the UK by Rotork Controls Limited. Registered office: Rotork plc, Brassmill Lane, Bath, BA JQ, UK.