Home Heating Oil Additive 3000 3000 provides the following: Reduces opportunity for microbial growth and water-related corrosion through gradual water control 3000 is a multifunctional home heating fuel additive designed to enhance a wide spectrum of performance properties. Contains antioxidants to protect thermal and oxidative stability Defoamer for quicker fuel tank filling 3000 may be continuously or batch blended into diesel fuel as a concentrate or as a stock solution. Verify that the additive is completely dissolved into the fuel. Material Compatibility 3000 is compatible with the following materials of construction: mild steel, 304 stainless steel, 316 stainless steel, Teflon and Viton. Do not use with Hypalon, ethylene, propylene, neoprene, Buna-N, or natural rubber. Copper, brass or bronze (yellow metals) should not be used with neat additive. Specific Gravity,60/60 F (15.6.15.5 C) 0.918 Density; lb/gal, 60 F (15.6 C) 7.64 Flash Point, PMCC, F ( C) 132 (55.6) Viscosity, cst @ 100 F (37.8 C) 25 Viscosity, cst @ 68 F (20 C) 47 Viscosity, cst @ 32 F (0 C) 116 Viscosity, cst @ 0 F (-17.8 C) 331 Viscosity, cst @ -20 F (-28.9 C) 746 GOOD FUEL STABILIZER GOOD WATER REMOVAL ALL APPLICATIONS EXCEPT TRUCK INJECTION SYSTEMS TO 7500 GALLONS OF This additive is for non-road use only Part #FA120-55 Gallon Drum Part #FA120-5 - 5 Gallon Pail
Home Heating Oil Additive Avalux 4000 Avalux 4000 provides the following: Antioxidants protect thermal and oxidative stability Avalux 4000 is a multifunctional home heating fuel additive designed to enhance a wide spectrum of performance properties. Corrosion inhibition Excellent low temperature additive handling Avalux 4000 may be continuously or batch blended into heating fuel as a concentrate or as a stock solution. Verify that the additive is completely dissolved into the fuel. Material Compatibility Avalux 4000 is compatible with the following materials of construction: mild steel, 304 stainless steel, 316 stainless steel, Teflon and Viton. Do not use with Hypalon, ethylene, propylene, neoprene, Buna-N, or natural rubber. Copper, brass or bronze (yellow metals) should not be used with neat additive. Specific Gravity,60/60 F (15.6.15.5 C) 0.900 Density; lb/gal, 60 F (15.6 C) 7.500 Flash Point, PMCC, F ( C) 156 (68.9) Viscosity, cst @ 100 F (37.8 C) 3 Viscosity, cst @ 68 F (20 C) 4 Viscosity, cst @ 32 F (0 C) 6 Viscosity, cst @ 0 F (-17.8 C) 11 Viscosity, cst @ -20 F (-28.9 C) 17 BEST FUEL STABILIZER MODEST WATER REMOVAL USED IN TRUCK ADDITIVE INJECTION SYSTEMS TO 4000 GALLONS OF This additive is for non-road use only 1 gallon : 4000 gallons Part #FA100-55 Gallon Drum
Home Heating Oil Additive Avalux 10k Avalux 10k provides the following: Antioxidants protect thermal and oxidative stability Corrosion inhibition Excellent low temperature additive handling ADDITION Avalux 10k may be continuously or batch blended into heating fuel as a concentrate or as a stock solution. Verify that the additive is completely dissolved into the fuel. MATERIAL COMPATIBILITY Avalux 10k is compatible with the following materials: 304 stainless steel, Buna-N, and HDPE. Do not use with natural rubber. See the Material Compatibility Document for more product specific information. Fuel Stabilizer: Helps to reduce fuel degradation which contributes to sludge formation. Dispersant: Gradually dissolves sludge and disperses water so that they can move more easily through filters and combust in the fire box. Also assists in water removal to help retard bacterial growth. Detergent: Helps to clean the fuel supply system which includes pumps, screens and nozzles. Corrosion Inhibitor: Protects storage tank from fuel and rust corrosion. Metal Deactivator: Fuel oil will react with copper and brass. This reaction causes gums and resins to form which in turn could contribute to sludge formation and clogged fuel delivery lines. The metal deactivator helps retard this reaction. Specific Gravity,60/60 F (15.6.15.5 C) 0.916 Density; lb/gal, 60 F (15.6 C) 7.60 Flash Point, PMCC, F ( C) 141 (60.6) Viscosity, cst @ 100 F (37.8 C) 7 Viscosity, cst @ -20 F (-28.9 C) 71 Avalux 10k is a multifunctional home heating fuel additive designed to enhance a wide spectrum of performance properties. BEST FUEL STABILIZER MODEST WATER REMOVAL ALL APPLICATIONS EXCEPT TRUCK INJECTION SYSTEMS TO 10,000 GALLONS OF This additive s maximum sulfur concentration is 60ppm. The maximum recommended concentration for use of the additive in diesel fuel is 0.05459 vol.%. The contribution to the sulfur level of the fuel that would result if the additive used at the maximum recommended concentration is 0.04ppm. 1 gallon : 10,000 gallons Part #FA110-55 Gallon Drum Part #12121-275 Gallon Tote Part #FA110-2 - 330 Gallon Tote
LEGAL DIESEL Fuel Additive WINTERFLOW WINTERFLOW provides the following: Lowers cold filter plugging point by 30 F Lowers Pour Point by 40 F Prevents fuel gelling in low temperatures Disperses wax during extended engine shutdowns in cold climates Aids against fuel filter icing Water dispersant to help safely remove water on a gradual basis WINTERFLOW functions as a wax modifier to improve the low temperature operability of middle distillate fuels. Improved low temperature additive handling WINTERFLOW may be batch blended into diesel fuel. Proper blending and handling procedures must be followed due to the nature of all low temperature operability additives. Blend the additive with the fuel at temperatures at least 10 F above the cloud point of the fuel. Ensure the additive is at or above minimum handling temperatures to avoid potential performance issues. Verify that the additive is completely dissolved into the fuel. Specific Gravity,60/60 F (15.6.15.5 C) 0.900 Density; lb/gal, 60 F (15.6 C) 7.49 Flash Point, PMCC, F ( C) 160 (71.1) Pour Point, F ( C) -16.6 (-27) Viscosity, cst @ 100 F (37.8 C) 4 Viscosity, cst @ 68 F (20 C) 6 Viscosity, cst @ 32 F (0 C) 11 Viscosity, cst @ 0 F (-17.8 C) 25 Clear Light Amber Liquid This diesel fuel additive complies with the federal low sulfur content requirements for use in diesel motor vehicles and non-road engines. This is a LEGAL DIESEL Fuel Additive product. 32 ounces : 250 gallons Part #11199-12/1 Quart Case
LEGAL DIESEL Fuel Additive CFI 1902 CFI 1902 provides the following performance benefits: Lowers cold filter plugging point Lowers Pour Point Prevents fuel gelling in low temperatures Disperses wax during extended engine shutdowns in cold climates Inhibits fuel filter icing Water dispersant to help safely remove water on a gradual basis Synthetic lubricity improver CFI 1902 may be continuously or batch blended into diesel fuel as a concentrate or as a stock solution. Proper blending and handling procedures must be followed due to the nature of all low temperature operability additives. Blend the additive with the fuel at temperatures at least 10 F above the cloud point of the fuel. Ensure the additive is at or above minimum handling temperatures to avoid potential performance issues. Verify that the additive is completely dissolved into the fuel. CFI 1902 is compatible with the following materials of construction: mild steel, aluminum, 304 stainless steel, 316 stainless steel, Teflon and Viton. Do not use with Hypalon, polyethylene, polypropylene, neoprene, Buna-N or natural rubber. Copper, brass, or bronze (yellow metals) should not be used with neat additive. Specific Gravity,60/60 F (15.6.15.5 C) 0.880 Density; lb/gal, 60 F (15.6 C) 7.33 Flash Point, PMCC, F ( C) 84 (28.9) Viscosity, cst @ 100 F (37.8 C) 2 Viscosity, cst @ 68 F (20 C) 2 Viscosity, cst @ 32 F (0 C) 4 Viscosity, cst @ 0 F (-17.8 C) 7 Viscosity, cst @ -20 F (-28.9 C) 12 Viscosity, cst @ -40 F (-40 C) 205 Clear Light Amber Liquid CFI 1902 is a multifunctional middle distillate fuel additive. It functions as a wax modifier to improve low temperature operability of diesel fuel. The sulfur content of this diesel fuel additive does not exceed 15ppm. This is a LEGAL DIESEL Fuel Additive product. Treat Rate Range 1 : 1500 (667 ppm vol.) 1 : 750 (1333 ppm vol.) Treat rates may vary due to regional fuel characteristics. Please contact your regional Innospec representative for recommendations. Registered EPA Maximum treat rate is 2500 mg/l. Part #FA130-4 - 55 Gallon Drum