CA/11022/CSA. Lineage Power N/A. Ref. Certif. No. Component DC-DC Converters for Use With ITE

Similar documents
Certificate of Compliance

Certificate of Compliance

Certificate of Compliance

Power Supply XP POWER LLC SUITE 150, 1241 E DYER RD SANTA ANA CA 92705, USA XP POWER LLC SUITE 150, 1241 E DYER RD SANTA ANA CA 92705, USA

File E Vol. 1 Sec. 125 Page 1 Issued: and Report Revised:

Certificate of Compliance

COVER PAGE FOR TEST REPORT

DK M2-UL. Ref. Certif. No. CB TEST CERTIFICATE CERTIFICAT D ESSAI OC. Date: Original Issue Date:

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

COVER PAGE FOR TEST REPORT

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

TEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements

READ AND FOLLOW ALL SAFETY INSTRUCTIONS 1. DANGER RISK OF SHOCK DISCONNECT POWER BEFORE INSTALLATION

SOUTH AFRICAN NATIONAL STANDARD

INSTALLATION INSTRUCTIONS LED RETROFIT ASSEMBLY (LRA) Rev F

Specification Grade Contemporary Wall Mount/Technical Installation Data

ABB France 3 rue Jean Perrin CS CHASSIEU Cedex FRANCE. Eppelheimer Str HEIDELBERG - ALLEMAGNE. Contacteur Contactor

MOONRING 1.5 MOONRING 3

TEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements

INSTALLATION INSTRUCTIONS

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

INSTALLATION INSTRUCTIONS MOONRING 1 LP1/MR1

SPECIFIC TECHNICAL CRITERIA

Assessment of the Effect of Specimens Dimensions on the Measured Transmissivity of Planar Tubular Drainage Geocomposites

OnDemand Switch. Radware TM. See appendix (ed.2) CB

Lumination TM LED Luminaire RC/LRC/RX/LRX Series - New Construction Frame

TEST REPORT IEC Part 1: General requirements for basic safety and essential performance

Captivate Illuminated Mirror Light

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

NL-FTPR150, FUNCTIONAL TRAINER ASSEMBLY INSTRUCTIONS

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

LUNERA VERTICAL E26 LED FLOODLIGHT LED Replacement for E26 Medium Base Floodlights Type B Ballast Bypassed

INSTALLATION INSTRUCTIONS LED Canopy Retrofit Kit

TEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

UB-2 2 Universal Button

Amendment to Test Report

Amendment to Test Report

IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed including the following:

A1100 GUARDIAN OVERFILL PREVENTION VALVE (with Installation Kit)

Plan de présentation CSITC RT

Installation Instructions

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

VersaWall SlimLine 1750

TEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements

EZ Fingerprint Recognition Unit Installation Guide

EASA Safety Information Notice

Installation Couplers intended for permanent connection in fixed installation

Fitting Instructions for SRG0034 Radiator Guard Radiator Guard KAWASAKI VERSYS

CERTIFICATO DI OMOLOGAZIONE

Cable Cubby 1202 and 1402 Installation Guide

Certificate of Compliance

INSTALLATION INSTRUCTIONS LIGHTPLANE 3.5. LP3.5 Suspended LED. A nd Avenue, Unit 1. CA P E W alwusa.

ENEC LICENCE. Licence No. ENEC Page 1/3 Date of Issue

IECEE. Taking Conformity Assessment Further

A1100 GUARDIAN OVERFILL PREVENTION SYSTEM

LS1 SERIES IMPORTANT: READ ALL INSTRUCTIONS THOROUGHLY AND CAREFULLY PRIOR TO INSTALLATION OF LINEAR SERIES FIXTURES AND RETAIN FOR FUTURE REFERENCE.

TEST REPORT PN-EN Light and lighting. Measurement and presentation of photometric data of lamps and luminaires

M9300 Series Electric Non-Spring Return Actuators

GETTING STARTED WITH IN-WALL DIMMER SWITCH

HOMELINK DOOR OPENER KIT

5 x 20mm Fuses S500 Series, Fast-Acting, Glass Tube

In this kit there should be: 1 x Engine Case Cover (ECC0085) 2 x M6x28mm long button head bolts PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING

TEST REPORT IEC Part 1: General requirements for basic safety and essential performance

Verax 75 and Verax VPA Installation Manual

UL TEST REPORT AND PROCEDURE

COMMISSION INTERNATIONALE DE KARTING - FIA

INTERNATIONAL STANDARD NORME INTERNATIONALE

M9300 Series Switch Kits

INSTALLATION GUIDE Works in double and single ended wiring.

SOLA SM and SOLA SM 365 Light Engine Instruction Manual

ROSAS Final Meeting ROSAS. Eric MAURY AIRBUS Engineering Future Projects. Main Achievements. 3rd March Presented by

b3c OPERATING MANUAL (GB) 9260(A) (A) 9360 Compacts scales 9260 (A) Ver 2014 EN September BC

TEST REPORT IEC Part 1: General requirements for basic safety and essential performance

LAL SERIES LED LUMINAIRE

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

EFFECT OF ADDING DISTRIBUTED GENERATION TO DISTRIBUTION NETWORKS CASE STUDY 2:

Part 7-2: Test methods Single cell and stack performance tests for solid oxide fuel cells (SOFC)

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

Cable Cubby 500 and 700 Installation Guide

Installation Instructions CRAFT M/L

Cable Cubby 1200 and 1400 Installation Guide

CERTIFICAT ROBINETTERIE SANITAIRE. Decision d'admission du 2eme semestre 1986 Decision de reconduction no 334-M1-08/3 du 24 novembre 2008

WEAVEBIRD LOOM TROUBLE SHOOTING GUIDE

INSTALLATION INSTRUCTION Aether 3.5 Color Tunable LED Downlight

V-2410 Three-Way Multipurpose Solenoid Air Valve

Parent s Guide. This guide contains important information. Please keep it for future reference US

VA9905 Actuator and VG1600 Series Six-Way Valves

INSTALLATION INSTRUCTION Bollard Light 12V

Homepage > Products > Airflow Control - VAV and CAV > Variable air volume flow control - VARYCONTROL > Control components > Type Easy.

FITTING INSTRUCTIONS FOR CP0404BL/WH NO-CUT AERO CRASH PROTECTORS HUSQVARNA 701 ENDURO/SUPERMOTO 2016-

TEST REPORT IEC Luminaires Part 2: Particular requirements: Section Two Recessed luminaires

An Urgent Bulletin from CSA Group

Square D General Purpose Relays

Safety Flash. IMCA Safety Flash 06/08 April Sikorsky S76A+ and S76A++ Helicopters

Testing Laboratory...: TÜV Rheinland Taiwan Ltd., Taichung Laboratory. Address...: 10F, No.219, Min Chuan Road, Taichung 403, Taiwan.

Cable Cubby 650 UT Installation Guide

Tetra minimax. LED Lighting System. BEFORE YOU BEGIN Read these instructions completely and carefully. Installation Guide

Page 2 of 23 UNT150420C11

Transcription:

IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME SYSTEME CEI D ACCEPTATION MUTUELLE DE CERTIFICATS D ESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC CB TEST CERTIFICATE CERTIFICAT D ESSAI OC Product Produit Name and address of the applicant Nom et adresse du demandeur Name and address of the manufacturer Nom et adresse du fabricant Component DC-DC Converters for Use With ITE Lineage Power Corporation 601 Shiloh Road, Plano, TX 75074 USA Same as the applicant Name and address of the factory Nom et adresse de l usine Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la 2 ème page Lineage Power Matamoros, S.A. de C.V. Poniente 2 No. 3 entre Notre 7 y limite del fraccionamiento ciudad industrial (CIMA), Matamoros, Tamaulipas, Mexico C.P. 87499 Additional Information on page 2 See pages 2 to 6 Trademark (if any) Marque de fabrique (si elle existe) Type of Manufacturer's Testing Laboratories used Type de programme du laboratoire d'essais constructeur Model / Type Ref. Ref. De type Additional information (if necessary may also be reported on page 2) Les informations complémentaires (si nécessaire, peuvent être indiqués sur la 2 ème page) A sample of the product was tested and found to be in conformity with Un échantillon de ce produit a été essayé et a été considéré conforme à la As shown in the Test Report Ref. No. Which forms part of this Certificate Comme indiqué dans le Rapport d essais numéro de référence qui constitue partie de ce Certificat Lineage Power N/A AUH, AUM, ATH, AXH, AXA, ATA, ADH, ATS, AXB, ATL, and ATM Series Additional Information on page 2 to 6 Replaces CA/8472/CSA dated March 5, 2007 Additional Information on page 2 IEC60950-1:2005 (2 nd edition) and EN 60950-1:2006+A11 including National Deviations, AT, AU, CA, DE, DK, ES, FI, FR, GB, IT, JP, KR, NL, NO, NZ, PL, SE, SI, US and Group Differences per CB Bulletin No. 112A CB 163595-2216001 This CB Test Certificate is issued by the National Certification Body Ce Certificat d essai OC est établi par l Organisme National de Certification CSA International 178 Rexdale Boulevard Toronto, ON M9W 1R3 Date: September 3, 2009 Signature: Tiki Wong, P.Eng. DQD 506.04 Rev. 2009-03-23 (CB Issued 2009-03) 1/6

Model Designation and Input/output Rating Input Rating (dc) Output Rating (dc) (Max) Model V A V A W AUSTIN 5V 3.3V, AUH005A0F 5 5 3.3 6 AUSTIN 5V 2.5V, AUH005A0G 5 5 2.5 6 AUSTIN 5V 2.0V, AUH005A0D 5 5 2.0 6 AUSTIN 5V 1.8V, AUH005A0Y 5 5 1.8 6 AUSTIN 5V 1.5V, AUH005A0M 5 5 1.5 6 AUSTIN 3.3V 2.5V, AUM005A0G 3.3 5.5 2.5 6 AUSTIN 3.3V 2.0V, AUM005A0D 3.3 5.5 2.0 6 AUSTIN 3.3V 1.8V, AUM005A0Y 3.3 5.5 1.8 6 AUSTIN 3.3V 1.5V, AUM005A0M 3.3 5.5 1.5 6 AUSTIN LITE 5V 3.3V, ALH005A0F 5 5 3.3 5 AUSTIN LITE 5V 2.5V, ALH005A0G 5 5 2.5 5 AUSTIN LITE 5V 2.0V, ALH005A0D 5 5 2.0 5 AUSTIN LITE 5V 1.8V, ALH005A0Y 5 5 1.8 5 AUSTIN LITE 5V 1.5V, ALH005A0M 5 5 1.5 5 AUSTIN LITE 3.3V 1.8V, ALM005A0Y 3.3 5.5 1.8 5 AUSTIN LITE 3.3V 1.5V, ALM005A0M 3.3 5.5 1.5 5 ALM005A0G 3.3 6 2.5 5 ALM005A0S2R6 3.3 6 2.6 5 AXH005A0X, AXH005A0X-S 3.0-5.5 5.0 0.75-3.63 5 DQD 506.04 Rev. 2009-03-23 (CB Issued 2009-03) 2/6

Model Designation and Input/output Rating (continued) Input Rating (dc) Output Rating (dc) (Max) Model V A V A W ATH006A0X-S 2.4-5.5 5.0 0.75-3.63 6 AXH010A0S0R9, AXH010A0S0R9-S 3.0-5.5 9.5 0.9 10 AXH010A0S1R0, AXH010A0S1R0-S 3.0-5.5 9.5 1.0 10 AXH010A0P, AXH010A0P-S 3.0-5.5 9.5 1.2 10 AXH010A0M, AXH010A0M-S 3.0-5.5 9.5 1.5 10 AXH010A0Y, AXH010A0Y-S 3.0-5.5 9.5 1.8 10 AXH010A0D, AXH010A0D-S 3.0-5.5 9.5 2.0 10 AXH010A0G, AXH010A0G-S 3.0-5.5 9.5 2.5 10 AXH010A0F, AXH010A0F-S 4.5-5.5 9.5 3.3 10 AXH010A0X, AXH010A0X-S 4.5 5.5 10 0.75 3.63 10 ATH010A0X-S 2.4-5.5 10 0.75-3.63 10 AXH016A0X, AXH016A0X-S 3.0-5.5 16.0 0.75-3.63 16 ATH016A0X-S 2.25-5.5 16.0 0.75-3.63 16 AXA003A0X, AXA003A0X-S 8.3-14 2.2 0.75-5.0 3 AXH003A0X, AXH003A0X-S 2.4-5.5 3.0 0.75-3.3 3 AXA005A0X, AXA005A0X-S 10-14 3.5 0.75-5.0 5 DQD 506.04 Rev. 2009-03-23 (CB Issued 2009-03) 3/6

Model Designation and Input/output Rating (continued) Input Rating (dc) Output Rating (dc) (Max) Model V A V A W ATA006A0X-S 8.3-14 4.5 0.75-5.0 6 AXA010A0X, AXA010A0X-S 10-14 6.5 0.75-5.5 10A max, 50W max AXA010A0A, AXA010A0A-S 10-14 6.5 5.0 10 AXA010A0F, AXA010A0F-S 10-14 6.5 3.3 10 AXA010A0G, AXA010A0G-S 10-14 6.5 2.5 10 AXA010A0D, AXA010A0D-S 10-14 6.5 2.0 10 AXA010A0Y, AXA010A0Y-S 10-14 6.5 1.8 10 AXA010A0M, AXA010A0M-S 10-14 6.5 1.5 10 AXA010A0P, AXA010A0P-S 10-14 6.5 1.2 10 AXA010A0S1R0, AXA010A0S1R0-S 10-14 6.5 1.0 10 AXA010A0S0R9, AXA010A0S0R9-S 10-14 6.5 0.9 10 AXA010A0A, AXA010A0A-S 10-14 6.5 5.0 10 ATA010A0X-S 8.3-14 7.0 0.75-5.0 10A max, 50W max AXA016A0X, AXA016A0X-S 10-14 9.5 0.75-5.0 16 ATA016A0X-S 8.3-14 10.0 0.75-5.0 16 ADH020FY, ADH020FY-S 4.5 5.5 6.2 2.6 1.3 5A max 5A max 20W Total ATH025A0X 4.5 5.5 21 0.8 3.3 25 DQD 506.04 Rev. 2009-03-23 (CB Issued 2009-03) 4/6

Model Designation and Input/output Rating (continued) Input Rating (dc) Output Rating (dc) (Max) Model V A V A W ATH030A0X 4.5 5.5 25 0.8 3.3 30 ATS025A0X 6 14 16 0.8 3.3 25 AXB030X43-S 18-30 2 3.0 6.0 10A max,. 30W max AXB050X43-S 20-30 3 5.0 15.0 10A max 50W max. ATL010A0X43-S 9 14 6.5 0.75 5.0 10A max 50W max AXB070X43 20-30 25 5-15 14A max 70W max ATS030A0X, ATS030A0X-S 6-14 25 0.8-3.63 30 ATM020A0X3-S 2.4-3.6 20 0.75-2.0 20 ATM030A0X3-S 2.4-3.6 30 0.75-2.0 30 ATS020A0X3-S 6-14 20 0.8-3.63 20 DQD 506.04 Rev. 2009-03-23 (CB Issued 2009-03) 5/6

Model Designation Nomenclature: The basic model number shown above may be further followed by alpha numeric characters to denote minor changes in SELV circuitry, tape and reel and/or mechanical design which do not affect the safety performance of the above dc-dc converters. The option codes may be separated by a dash, (e.g. AXH010A0X43-SR). The X in the voltage designation position indicates that the output is adjustable. The SXRX suffix is the output voltage identifier to denote a special model whose output voltage is factory adjusted per Customer request, where the SaRb denotes an a.bv, e.g. 2.1V is represented by S2R1. The ADH020FY has two outputs, 2.6V/5A and 1.3V/5A, for a total of 20W (13W for the 2.6V output and 6.5W for the 1.3V output). The maximum output current shown is a function of the maximum ambient and airflow. Refer to item 2 of Conditions of Acceptability. Option Suffix Remote Sense 3 Positive on/off logic 4 Long Pins (0.2 in) 5 SMT Version -S Tape and Reel R Rohs Compliant -Z Parallel Current Sharing -P Two Extra Ground Pins -H Model Description Austin -- AUH005, AUM005 Austin Lynx II ATH010 Austin MicroLynx AXH005 Austin MicroLynx II ATH006 Austin SuperLynx AXH016 Austin SuperLynx II ATH016 12V Austin MicroLynx AXA005 12V Austin MicroLynx II ATA006 12V Austin Lynx AXA010 12V Austin Lynx II ATA010 12V Austin SuperLynx AXA016 12V Austin SuperLynx II ATA016 Austin Dual Output ADH020FY 12V Austin MiniLynx AXA003 5V Austin MiniLynx AXH003 5V Austin Lynx AXH010 5V Austin MegaLynx ATH025, ATH030 12V Austin MegaLynx ATS025, ATS030, ATS020 24V Austin Lynx AXB030, AXB050X, AXB070X 9 to 18V Austin Lynx ATL010 2.4-3.6V Austin SuperLynx ATM020 and ATM030 Additional information (if necessary) Information complémentaire (si nécessaire) Date: September 3, 2009 Signature: Tiki Wong, P.Eng. DQD 506.04 Rev. 2009-03-23 (CB Issued 2009-03) 6/6

Page 2 of 53 Report No. CB 163595-2216001 Test item description... : Trade Mark...: Manufacturer...: Model/Type reference...: Ratings...: Component DC-DC Converters for ITE Lineage Power Lineage Power Corporation. 601 Shiloh Road, Palno, TX 75074 USA AUH005A0X, AUM005A0X, ATH010A0X, AXH005A0X, ATH006A0X, AXH016A0X, ATH026A0X, AXA005A0X, ATA006A0X, AXA010A0X, ATA010A0X, AXA016A0X, ATA016A0X, ADH020FY, AXA003A0X, AXH003A0X, ATH025A0X, ATH030A0X, ATS025A0X, AXB030X43-S, AXB050X43-S, ATL010A0X43-S, ATM020A0X3, AXB070X43, ATS030A0X, ATM030A0X3-S, ATS020A0X3 Input: Refer to page 8 to 10 of report Output: Refer to page 8 to 10 of report Copy of marking plate: Refer to Enclosure 4 TRF No. IECEN60950_1C