Catalogue Rondelec Armoire de trottoir Magasin et showroom : Rue du Pré-de-la-Fontaine 19 117 Meyrin (Satigny) Service h/7j au 0 33 3 7 et sur www.fecsa.ch
System Advantages n Flexible and all purpose usable by modular construction n Up-to-date modern look. Award achieved for excellent industrial design n Cable entry also with closed door possible n Various fit-in types by pre-equipped modules RONDO is available as mobile or fixed versions. RONDOmobile the pillar will be placed over the elektrant and fixed with undetachable screws. The equipment can be choosen individually. RONDO won the industrie award for excellent design. The elektrant is an ironcase pedestal. Closed elektrant, flush mounted with the ground. Opend elektrant, the RONDOmobile pillar can be fixed above. Easily. Safe. Perfect. RONDOmobile RONDO also for main supply units
System Distribution cabinets (fixed version) round design type 135 Type Reference-No. Round pillar with plug-in door and cutout for socket outlet cable for socket outlet combinations SL135A approx. 600 System RONDOmobil Type Reference-No. Round pillar with plug-in door and cutout for socket outlet cable for socket outlet combinations with IP67 socket and cable with connecting cable 5 x 16 mm and plug 5-pole 63A IP67 for power supply SF135M Round pillar with plug-in door for socket outlet combinations and cutout for socket outlet cable with mounting plate for socket outlet combination, but without IP67 socket SF135L Pedestal / Elektrant Cast iron predestal with coverplate H x W x D 310 x 0 x 315 (mm) With stainless steel bolts and nuts for fitting the cabinet SF135M and socket 5-pole 63A IP67 for power supply Pedestal / Elektrant empty, without plug SX135 SX135L
Technical information Outdoor distribution pillars, 77 mm deep Empty pillar Protection type: IP Protection class II Depth: 77 mm For devices up to 00 A Colour: RAL 7035 (light grey) Material: fibre-glass reinforced polyester type FS 833.5 according to DIN 16 913 Cable entries closed at the top, at the bottom optionally with flange in -component technology Door with hinge Double locking system incl. a profile half cylinder with keys Pedestal and cabinet are one unit Prepared for the installation of standardized ESPRO modular assembly sets on NT support profiles or for one-piece assembly panels Empty pillar, IP, depth 77 mm Mounting set (installed) 1
Outdoor distribution pillars, 77 mm deep Overall height Modules per 18 mm Overall width External dimensions W x H x D (mm) Article no. 5 60 10 180 1 3 360 x 1710 x 77 583 x 1710 x 77 838 x 1710 x 77 SL17VT SL175VT SL177VT 6 8 168 5 1 3 360 x 010 x 77 583 x 010 x 77 838 x 010 x 77 SL0VT SL05VT SL07VT 13
Accessories for outdoor distribution pillars, 77 mm deep Design Article no. Design Article no. Flanges Membrane flange DY5755F Ground grid made of steel plate Pillars (type) 155/175/05 907 157/177/07 9075 Flange for metric fittings with pre-stampings for 7 x M 0 / M 1 and x M 3 /M 0 and 1 x M 0 / M 3 / M 0 Blind flange (can only be installed at the top) Flange for metric fittings (can only be locked from the inside) with pre-stampings for 7 x M 0 / M 1 and x M 3 /M 0 and 1 x M 0 / M 3 / M 0 DY5756F DY5757F DY575F Filling compound for pedestal 95075 Plastic bag with 5 l filling compound to reduce condensation water in outdoor cabinets Type of required cabinet quantity 17, 0 1 bag 175, 05 bags 177, 07 3 bags The filling height should be approx. 00-300 mm. Cover 966 for temporary connection side opening 55 mm of SL17/175/0/05/07 Feeding flange (can only be locked from the inside) Feeding up to max. x 10 mm DY5759F Double locking 788 complete, without profile half cylinder Document pocket, large 55696 DIN A Profile half cylinder 5099 with keys Control cabinet heating 55517 to avoid condensation 30 V, 33 W, thermostatically controlled Lighting fitting 15 W 759 with switch and Schuko (pin earth) socket and 10 A fuse (DII) for cabinets DIN size 00, 0, 1, Door stopper 6986 limits the door opening angle to approx. 110 1
Technical dimensions: outdoor distribution pillars, 77 mm deep Type 17 Type 175 Type 177 Type 0 Type 05 Type 07 15
Technical information Outdoor distribution cabinets, 315 mm deep Empty cabinet Protection type: IP3, on request IP Protection class II Depth: 315 mm For devices up to: Overall height 5: 00 A Overall height 6: 500 A (SL103VT: 630 A) Overall height 8: 630 A Colour: RAL 7035 (light grey) Material: fibre-glass reinforced polyester type FS 833.5 according to DIN 16 913 Cable entries closed at the top, at the bottom optionally with flange in -component technology Door with hinge Double locking system incl. a profile half cylinder with keys Pedestal optionally as soil fixing or floor construction socket version Prepared for the installation of standardized ESPRO modular assembly sets on NT support profiles or for one-piece assembly panels Empty cabinet, IP3 (), depth 315 mm Mounting set (installed) 16
Outdoor distribution cabinets, 315 mm deep Overall height Overall width External dimensions W x H x D (mm) Article no. 5 1 80 x 85 x 315 585 x 85 x 315 1110 x 85 x 315 SL08VT SL080VT SL08VT 6 5 585 x 1005 x 315 1110 x 1005 x 315 155 x 1135 x 315 SL100VT SL10VT SL103VT 8 3 585 x 1355 x 315 780 x 1355 x 315 1110 x 1355 x 315 SL130VT SL131VT SL13VT Pedestal Pedestal type Overall width External dimensions W x H x D (mm) Article no. Soil fixing pedestal Depth below ground 600 mm 1 3 5 80 x 300 x 315 585 x 300 x 315 780 x 300 x 315 1110 x 300 x 315 155 x 300 x 315 SX00 SX005 SX006 SX007 SX103 Floor construction socket 3 585 x 50 x 315 780 x 50 x 315 1110 x 50 x 315 SX01 SX015 SX016 17
Accessories for outdoor distribution cabinets, 315 mm deep Design Article no. Design Article no. Flanges Membrane flange Flange for metric fittings with pre-stampings for 7 x M 0 / M 1 and x M 3 /M 0 and 1 x M 0 / M 3 / M 0 Blind flange (can only be installed at the top) Flange for metric fittings (can only be locked from the inside) with pre-stampings for 7 x M 0 / M 1 and x M 3 /M 0 and 1 x M 0 / M 3 / M 0 Feeding flange (can only be locked from the inside) Feeding up to max. x 10 mm DY5755F DY5756F DY5757F DY575F DY5759F Ground grid made of steel plate Cabinet size 00 9069 0 9070 1 9071 907 Filling compound for pedestal 95075 Plastic bag with 5 l filling compound to reduce condensation water in outdoor cabinets Type of required cabinet quantity 17, 0 1 bag 175, 05 bags 177, 07 3 bags The filling height should be approx. 00 300 mm. Cover 966 for temporary connection side opening 55 mm of SL17/175/0/05/07 Double locking 788 complete, without profile half cylinder Document pocket, large 55696 DIN A Control cabinet heating 55517 to avoid condensation 30 V, 33 W, thermostatically controlled Profile half cylinder 5099 with keys Lighting fitting 15 W 759 with switch and Schuko (pin earth) socket and 10 A fuse (DII) for cabinets DIN size 00, 0, 1, Door stopper 6986 limits the door opening angle to approx. 110 18
Technical dimensions: outdoor distribution cabinets, 315 mm deep Height 85 SL08VT SL080VT SL08VT Height 1005 SL100VT SL10VT Height 1355 SL131VT SL13VT 19