RUBBER INJECTION MACHINE SERIES OUR HEADQUARTERS UK Slovakia Taiwan The only name that matters for injection and compression moulding machines www.panstone.eu www.panstone.eu Tel: +44 (0) 978 476 Email: sales@panstone.eu Unit 5, Pinfold Lane, Llay, Wrexham Ll 0TU
ABOUT PAN STONE Pan Stone Hydraulic Industries co ltd was founded by a dedicated and outstanding team of engineers who all have extensive experience in the manufacture and design of machinery for the rubber moulding industry. Our goal is to provide an innovative and quality product with zero defects to our customers. We continually update our manufacture techniques and ensure our workforce is skilled and fully trained in order to manufacture a wide range of standard and custom built machinery at an industry competitive price. Since 005 Pan Stone has become a transnational corporation with the addition of our production plant in the Anhui province of China. We supply machinery worldwide and rely on a global team of experienced and skilled sales and service engineers. Pan Stone Europe is our European branch offering outstanding sales and service support to its customers. Pan Stone Europe has two technical sales and service centres ensuring our customers are supported and supplied with our products throughout Europe. RUBBER INJECTION MACHINE SERIES Quality Efficient Innovative design resulting in high productivity and profitability Reliable Our range of injection machines include: Pan Stone are focused on excellence in manufacturing techniques and customer service. We believe our dedication to continuous improvement and innovation will set the benchmark in this industry. Our dedicated and experiencedteam are able to offer a full design service from mould to machine to ensure our customers receive the most cost effective and innovative solution for their production needs. Vertical injection moulding machines Horizontal injection moulding machines C frame injection moulding machines Liquid and paste silicone injection machines RUBBER INJECTION MACHINE SERIES +44 (0) 978 476 sales@panstone.eu www.panstone.eu
VERTICAL RUBBER INJECTION MOULDING Pan Stone Vertical injection machines are built with quality and versatility in the forefront of our design. Allowing our customers to produce a wide range of parts utilising many different mould and compound variants. MACHINE OPTIONS Our vertical machines offer a wide range of options in order to tailor make your machines for specific and individual applications. F.I.F.O INJECTION SYSTEM Our standard range of machines are supplied with vertical FIFO injection units. This design lends itself to an easy clean system allowing quick compound type and colour changes without excessive material waste or down time. Internal upper ejector (Lifter) Internal bottom ejector (Lifter) Our modular design enables the addition of sliding frames, tables and further functions at a later stage if you wish to alter your production requirements. The standard range is available in numerous sizes, as the specification table below illustrates. These machines are exactly the same, as it is purely the size of the machine that differs, not the design. RT 3RT RUBBER FEEDING START RUBBER FEEDING RUBBER FEEDING FINISH Housing Rubber Barrel Clamping Force (KN) 000 000 0 0 0 000 Volume Standard (CM3) 0/000cc 000/0cc 000/0cc 000/0cc 0/0cc 0/30cc Opening Stroke 3 Opening Daylight - -5-5 -5-5 -5 Heating Plates Standard (W x D) 405x430 5x5 6x6 6x6 700x700 8x8 70000 0/30cc 0-0 000x000 0000 0cc 600-600 00x0 Outside top and bottom ejectors Middle mould turn 80 degree Bottom mould is allowed to shuttle out 70% for outside bottom ejector lifting up the final parts
HORIZONTAL INJECTION MOULDING MACHINES MACHINE OPTIONS Our horizontal machines offer a wide range of options in order to tailor make your machines for specific and individual applications. Twin demoulding brush system detail Fixed face with hydraulic ejector (lifter) Mobile face with hydraulic ejector (lifter) Mobile face with central ejector With brush system Clamping Force (ton) Volume (c.c.) Heating Platen Size Pressure (kg/cm) Temp. Control (set) Motor Daylight Stroke of Main Ram Barrel Length/ : L/D 00/60 x 900 0HPx6P 3 5: 80 60/00 x 900 0HPx6P 3 5: 00 00/ 405x430 900 5HPx6P 3 5: 00 /600 0x50 900 0HPx6P 5: 600/000 600x6 900 0HPx6P o 80 5: 3 000/0 6x700 900 5HPx6P o 80 5: 0/000 70x900 900 5HPx6P 580 o 80 5:
C FRAME RUBBER INJECTION MOULDING APPLICATION Corner jointing for automotive door strip and various rubber parts FEATURE Precise shot volume Fast and easy for mould change Easy operation Clamping Force (ton) Volume (c.c.) Heating Platen Size Pressure (kg/cm) Temp. Control (set) Motor Daylight Stroke of Main Ram Min. Mold Height Barrel Length/ : L/D 5 430x 00 5HPx4P 3 o.5 : F.I.F.O 30 00 00 x x 00 00 7.5HPx4P 0HPx6P 3 3 : : 80 x3 00 0HPx6P 3 : 5 430x 00 5HPx4P 3 o.5 : F.I.L.O 30 00 x 00 5HPx4P 3 : 00 x 00 7.5HPx4P 3 :
LIQUID SILICONE MACHINES VERTICAL AND HORIZONTAL Clamping Force (ton) Volume (c.c.) Heating Platen Size Pressure (kg/cm) Motor Daylight Stroke of Main Ram Typical applications for liquid silicone rubber are products that require high precision such as electric connectors and seals in the pharmaceutical industry. 00/00 00/ 00 x 0x600 600x600 700 kw 700 kw 0 0 o /3 800 700x700 700 5kw 0 o 60
VERTICAL INJECTION MOULDING MACHINE WITH SILICONE STUFFER The silicone stuffer can be added to any of our range of vertical injection machines in our range, with a variety of stuffer volumes upon request. FEATURE Easy colour changes resulting in less compound waste.