Tedder Pöttinger EUROHIT 97+021.02.0204
Quality requirements are growing Safe future, quality-oriented and productive the key essentials of modern agriculture. It is not enough to just produce agricultural technology, we have to meet the requirements of today's farmers. That is a challenge demanding a will to experiment and the ability to think freely. Thinking the same way as you. Quality green forage is the basis for high milk yield and meat production. The way in which technology is implemented is a deciding factor in bringing in a successful harvest. While developing our latest generation of tedders we have been aiming for high productivity and excellent working quality. The objective is to harvest the highest quality forage in the shortest possible time at minimum cost. To achieve this objective, we have kitted our tedders out with new tine mountings, jockey wheels and shock absorber struts. Go ahead and compare the difference is clear. That is why we invite you to join Pöttinger and work together towards a successful future! "Quality is value that pays for itself" Lothar Schmidt, Author 2
Pages 4 5 Technical details Pages 16 17 Trailed tedders with 8 and 10 rotors Pages 6 7 Mountings Transmission Tines Pages 8 9 Ground hugging Fenceline tedding Transport Pages 10 11 4-rotor tedder Seite 18 19 Technical Data Tedders with 4 and 6 rotors Seite 20 21 Technical Data Tedders with 8 and 10 rotors Seite 22 23 Options Pages 12 13 6-rotor tedder Seite 24 Imprint Pages 14 15 8-rotor tedder 3
High quality standards of manufacture guarantee a long service life. The Pöttinger tedder range is packed with modern precision engineering. Globular iron castings, solid steel components, heavy duty rotary joints and top quality paintwork speak for themselves. Distinctive colours and modern design make our tedders look good too. You can be sure that Pöttinger implements command a high resale value. Look for the details we would like to help you in reaching a decision. Details with Smart Engineering Rigid frame tube Welds seams can be weak points. The frame tubes (tube dimensions 2.76 x 0.28 / 70 x 7 mm) on EUROHIT tedders are weld-free and pressed onto castings for a permanent fit. Tine arms made of flat bar Solid bars ensure that fittings remain in place more securely. Heavy duty frame hinges with replaceable bushes. Large flotation tyres 6-PR flotation tyres ensure smooth running and protect the sward, even over bumpy ground. All wheels are fitted with anti-wrap guards as standard. 4
Support disc Each rotor features an additional support plate to increase the stability of the tine arm mountings. This ensures the arms cannot twist, even in a really heavy crop. Comfortable operation Pöttinger Select Control (EUROHIT 91 AZ). Most functions can be operated automatically at the touch of a button from the driver's seat. Raising the rotors, fenceline tedding, engaging the transport chassis it all works like magic. High quality paintwork Powder-coated paintwork has proven flexibility and durability in the field. Surfaces can be retouched without the paint flaking away true automotive quality. Pöttinger brings you smartlooking designs and distinctive colours. 5
Der Anbau der Antrieb die Lebensdauer Tedders from Pöttinger are well-known for their short headstock. The centre of gravity is located closer to the tractor, reducing the power requirement of the tractor and increasing driving safety. Mounting options EUROHIT N EUROHIT H Pivoting headstock Rigid hitch mounting EUROHIT A (option: 47, 54) EUROHIT 69 AZ, 80 AZ, 95 A, 105 A, 130 A Trailed mounting Well thought out stabilization Pivoting headstock with heart-shaped pivot pin retainer Perfect cornering with the tedder following in the tractor's tracks. The shock absorbing struts provide additional stability with spring-loaded cylinders compensating for turning movement. When lifted the tedder swings into the central position. Even on slopes the tedder cannot underrun, it follows the tractor faithfully. Pin interlock to prevent freedom of movement for road transport just relocate the locking pin. Stabilizing shock absorbers Double-acting shock absorbing struts on both sides ensure the tedder remains centred, even on slopes. The struts stabilise the machine when it is lifted and during transport on the road. Even at high travelling speeds the machine is prevented from bouncing. Standard equipment on EUROHIT 69 N/NZ, 80 NZ 81 N/NZ and 91 NZ. As an option for EUROHIT 47 N, 54 N and 61 N/NZ (varies from country to country). 6
4WD transmission Professionals look for positive power transmission and heavy duty design. This driveline features smart-engineered details that put the Pöttinger range of tedders up front. No power should be lost in the driveline. The heavy duty HIT- Tech double c.v. joints are similar to those on a tractor's front half-shafts. Each rotor can move freely under full power in every position. Ultimate ground hugging is guaranteed, even on slopes and rough ground. Heavy duty tines Losing tines during tedding is not just annoying, it also puts animals and following harvesting machinery at risk. The heavy duty tine with a long service life The newly developed "Heavy Duty" tine ensures reliability. The curved shape of the mounting supports the tine, making it more effective and harder wearing. Benefits: the tines are much more durable and need to be replaced less often (from EUROHIT 47 N). The tine security system is integrated into the holder. EUROHIT 69 N 7
The right angle for a clean crop Clean forage is the number one aim of the harvesting process. Fewer germs and lower ash content in the silage means healthier animals and higher meat and milk yield. The optimum rotor position must be easy to adjust effectively. Rotor tracking Jockey wheel for optimum ground tracking and sward protection The additional jockey wheel on the headstock is ideal for guiding the tines over the ground. A chaintype top link is used instead of a rigid top link. The jockey wheel ensures that the working depth is always set correctly. Moreover, this top-of-the-range version guarantees high-speed working, resulting in higher coverage. No tools are required to adjust the height of the jockey wheel. Wrapping is prevented reliably by an extra guard cover even in high quantities of crop. All rotors are mounted on swivel joints for freedom of movement to provide optimum ground hugging. Fenceline tedding Adjust manually EUROHIT 44 N, 47 N, 54 N, 61 N, 69 N, 81 N. Rigid rotor angle adjustment Fine tooth meshing allows the rotor angle to be adjusted in seven stages of one degree each adaptable to different forage types and quantities. (not available on 44 H and 47 H). Mechanical fenceline adjustment (EUROHIT NZ models) operated from the tractor seat by lanyard. Hydraulic fenceline adjustment (standard on AZ models) operated by single-acting hydraulic cylinder with gas accumulator. Setting the wheels at an angle causes the tedder to run diagonally so the forage is not flung onto neighbouring fields or crops. This can also be used to prevent the tedder drifting downhill when working across really steep slopes. The wheel can be adjusted to the left or right. 8
Raised for transport Models up to and including EUROHIT 54 N have rotors that rotate inwards to save space during transport and parking. From EUROHIT 47 the Hydrokomfort pivoting system raises the outer rotors. Also available for ALPINHIT 44 on option. EUROHIT 47 H ready to roll EUROHIT 69 NZ Hydrokomfort The rotors are pivoted hydraulically to the rear for transport. Folded back in the EUROHIT 95 A EUROHIT 130 A Transport 9
4-rotor tedder for all locations... The increased specifications required by small to medium-sized businesses are met by this 4-rotor machine. Designed to work on really steep slopes in addition to normal ground, these tedders have a short headstock and small diameter rotors. Compact engineering working widths from 13.12 to 17.06 ft / 4.0 to 5.20 m (DIN). EUROHIT 47 N 47 H/N working width 14.44 ft / 4.40 m (DIN) This 4-rotor tedder features 6 tine arms per rotor and hydraulic action. 54 N working width 17.06 ft / 5.20 m (DIN) The tedder for medium-sized farms. Can be operated comfortably from the driver's seat. Tedding with smaller tractors: drawbar and single c.v. joint PTO shaft are available for EUROHIT 47 and 54. Alpine tedding with adjustable headstock 44 H/N spezial Alpine tedder, working width 13.12ft / 4.0 m (DIN). The tedder is mounted on the tractor hitch with an adjustable headstock to optimise centre of gravity. Special lightweight construction for twin axle mowers, mountain tractors and light tractors. High tensile strength, aluminium-alloy transmission casing and arms of spring steel guarantee this machine's toughness. Freewheel for PTO shaft also available. EUROHIT 44 N-spezial 10
EUROHIT 47 H EUROHIT 54 N 11
6-rotor tedder best quality forage, stem for stem The tedder range for farmers who place value on high performance, top-ofthe-range equipment and comfortable operation. The trailed version EURO- HIT 69 AZ and 80 AZ can achieve really high coverage even with smaller tractors. 61 N / NZ working width 18.86 ft / 5.75 m (DIN) The special feature of the EUROHIT 61 is its short headstock. The centre of gravity is located closer to the tractor hitch, reducing the power requirement of the tractor. The small diameter rotors (4.27 ft / 1.3 m) guarantee excellent ground hugging, best possible crop pickup and a uniform pattern of spread. 69 N working width 21.16 ft/ 6.45 m (DIN) The keenly-priced 6-rotor tedder with manual fenceline tedding system and 16 x 6.5 8 tyres.. 69 AZ / NZ Arbeitsbreite 6,45 m (DIN) 80 AZ / NZ working width 24.44 ft / 7.45 m (DIN) The A models are equipped with an additional chassis which is also trailed during operation. EUROHIT 69 NZ and 80 NZ tedders come with a fenceline tedding system as standard. Hydrolift is standard equipment on EUROHIT 69 AZ and 80 AZ. The outer pair of rotors are raised to the limit stops during turning, and the transport chassis lifts the whole tedder clear of the ground. A single-acting connection is all that is needed! EUROHIT 69 N EUROHIT 69 / 80 AZ transport 12
EUROHIT 69NZ EUROHIT 61NZ 13
8-rotor tedder where sheer performance is in demand... The ultimate machine for demanding applications. You will look forward to working with this level of comfort. 81 AZ/NZ working width 25.26 ft / 7.70 m 91 A/AZ/NZ working width 28.21 ft / 8.60 m An excerpt from the technical details indicates the special features of these models. The patented shock absorbing system with efficient spring-loaded struts ensures smooth running. The EUROHIT 91 AZ is equipped with a hydraulic pivoting transport chassis as standard. The chassis folds up hydraulically over the rotors during operation, improving the centre of gravity. The transport interlocks engage automatically when the rotor units are raised. The fenceline tedding system is also adjusted hydraulically. Lighting and warning signs are fitted as standard. EUROHIT 91 NZ Details featuring Clever Farming... Power clutch on the outer rotors can be hinged through 180. Extra thick fingers withstand the highest stress. Wide during operation, narrow and low during transport. For road transport the rotors are pivoted upwards to save space. Parking height 10.7 ft / 3.26 m NZ or 11.02 ft / 3.36 m AZ. EUROHIT 91 AZ: The ultimate in automation, Pöttinger's "Select-Control" is standard on the EUROHIT 91 AZ. An extension cable can be supplied for tractors with implement recognition systems if required. The two inner rotors are fitted with especially high load bearing 220/50-6 (81 AZ) or 18.5x8.5-8 (91 AZ) flotation tyres. No sinking in on damp ground. 14
EUROHIT 81 N EUROHIT 91 NZ 15
New: trailed 8- and 10-rotor tedders with unique ground hugging system Designed by professionals: a tedder for really large areas. Pöttinger gave bestpossible ground hugging highest priority during development, despite a working width of 13 metres. This industry-leading solution is completely unique. 95 A trailed tedder with 8 rotors and a working width of 29.53 ft / 9.0 m (DIN). 105 A trailed tedder with 8 rotors and a working width of 33.46 ft / 10.20 m (DIN). 130 A huge capacity trailed tedder with 10 rotors and a working width of 41.67 ft / 12.70 m (DIN). The rotors are pivoted hydraulically to the rear for transport. Folded back in the transport position the EUROHIT 130 A is just 9.5 ft / 2.9 m wide and 26.9 ft / 8.2 metres long. Four wheels are automatically locked in the direction of transport so the machine can be towed. This alleviates the need for a transport chassis. No wonder the tedder only weighs 3395 lbs / 1540 kg. 16
Independent... The two halves of the machine are joined by a 3-D linkage allowing them to move independently of each other over uneven ground. EUROHIT 105A Jockey wheels are mounted on each halve of the machine to guide the tines neatly over the ground. EUROHIT 130 A 17
Farmers' needs are growing and so is our product range. In addition to meeting the needs of small to medium sized farms we also aim to satisfy the requirements of contractors and large farms. Tedders with 4 and 6 rotors EUROHIT Width Working width Rotors Arms/ Transport Parking height DIN rotor width 44 H special 14.6 ft / 4.45 m 13.12 ft / 4.00 m 4 5 9.84 ft / 2.45 m 6.96 ft / 2.12 m 44 N special 14.6 ft / 4.45 m 13.12 ft / 4.00 m 4 5 9.84 ft / 2.45 m 6.96 ft / 2.12 m 47 H 15.42 ft / 4.70 m 14.44 ft / 4.40 m 4 6 8.20 ft / 2.50 m 7.38 ft / 2.25 m 47 N 15.42 ft / 4.70 m 14.44 ft / 4.40 m 4 6 8.20 ft / 2.50 m 7.38 ft / 2.25 m 54 N 17.72 ft / 5.40 m 17.06 ft / 5.20 m 4 6 9.35 ft / 2.85 m 8.20 ft / 2.50 m 61 N 19.68 ft / 6.00 m 18.86 ft / 5.75 m 6 5 9.35 ft / 2.85 m 9.74 ft / 2.97 m 61 NZ 19.68 ft / 6.00 m 18.86 ft / 5.75 m 6 5 9.35 ft / 2.85 m 9.74 ft / 2.97 m 69 AZ 22.47 ft / 6.85 m 21.16 ft / 6.45 m 6 6 9.84 ft / 3.00 m 10.99 ft / 3.35 m 69 N 22.47 ft / 6.85 m 21.16 ft / 6.45 m 6 6 9.84 ft / 3.00 m 10.99 ft / 3.35 m 69 NZ 22.47 ft / 6.85 m 21.16 ft / 6.45 m 6 6 9.84 ft / 3.00 m 10.99 ft / 3.35 m 80 AZ 25.75 ft / 7.85 m 24.44 ft / 7.45 m 6 6 9.84 ft / 3.00 m 12.24 ft / 3.73 m 80 NZ 25.75 ft / 7.85 m 24.44 ft / 7.45 m 6 6 9.84 ft / 3.00 m 12.24 ft / 3.73 m H = hydraulic headstock rigid N = pivoting headstock A = trailed machine Z = central fenceline tedding system special = adjustable headstock PTO speed 540 rpm EUROHIT tedders to match any mower Mower working width 5.41 ft / 1.65 m 6.07 ft / 1.85 m 7.22/7.38 ft / 2.20/2.25 m EUROHIT 44 EUROHIT 47 EUROHIT 54 EUROHIT 61 EUROHIT 69 EUROHIT 80 18
47-H, 47 N min. kw/hp Weight 11/15 540 lbs / 245 kg 11/15 595 lbs / 270 kg 15/20 796 lbs / 361 kg 15/20 846 lbs / 384 kg 26/35 926 lbs / 420 kg 30/40 1477 lbs / 670 kg 30/40 1532 lbs / 695 kg 30/40 1676 lbs / 760 kg 33/45 1543 lbs / 700 kg 33/45 1599 lbs / 725 kg 30/40 1819 lbs / 825 kg 37/50 1719 lbs / 780 kg All datas not binding 44 N-spezial, 44 H-spezial 54-N 61-N, 61 NZ, 69 AZ, 69 N, 69 NZ, 80 AZ, 80 NZ 8.5/8.6 ft / 2.60/2.62 m 8.86 ft / 2.70 m 9.97/10 ft / 3.04/3.05 m 11.35/11.48 ft / 3.46/3.50 m 19
Tedders with 8 and 10 rotors EUROHIT Width Working width Rotors Arms/rotor Transport Parking height DIN width 81 N 25.62 ft / 7.81 m 25.26 ft / 7.70 m 8 5 9.84 ft / 3.00 m 12.14 ft / 3.70 m 81 NZ 25.62 ft / 7.81 m 25.26 ft / 7.70 m 8 5 9.84 ft / 3.00 m 12.14 ft / 3.70 m 91 A 29.07 ft / 8.86 m 28.21 ft / 8.60 m 8 6 9.84 ft / 3.00 m 11.02 ft / 3.36 m 91 AZ 29.07 ft / 8.86 m 28.21 ft / 8.60 m 8 6 9.84 ft / 3.00 m 11.02 ft / 3.36 m 91 NZ 29.07 ft / 8.86 m 28.21 ft / 8.60 m 8 6 9.84 ft / 3.00 m 11.02 ft / 3.36 m 95 A 30.51 ft / 9.30 m 29.53 ft / 9.0 m 8 6 7.87 ft / 2.40 m 105 A 34.44 ft / 10.50 m 33.46 ft / 10.20 m 8 6 9.51 ft / 2.90 m 130 A 42.65 ft / 13.0 m 41.67 ft / 12.71 m 10 6 9.51 ft / 2.90 m N = pivoting headstock A = trailed machine Z = central fenceline tedding system PTO speed 540 rpm 105 A 130 A EUROHIT tedders to match any mower Mower working width 5.41 ft / 1.65 m 6.07 ft / 1.85 m 7.22/7.38 ft / 2.20/2.25 m EUROHIT 81 EUROHIT 95 / 91 EUROHIT 105 EUROHIT 130 Mower combinations 17.39 ft / 5.30 m 18.70 ft / 5.70 m 20.34 ft / 6.20 m EUROHIT 81 EUROHIT 95 / 91 EUROHIT 105 EUROHIT 130 Front mower 9.84 ft / 3 m Rear mower 8.60 ft / 2.60 m Front mower 9.84 ft / 3 m Rear mower 9.84 ft / 3 m Front mower 9.84 ft / 3 m Rear mower 11.48 ft / 3.50 m 20
Expectations regarding sheer processing capacity continue to increase. One of our aims is to meet the new requirements of contractors and large farms. Transport min. kw/hp Weight Hydraulic connections on tractor lenght 40/55 22073 lbs / 940 kg 1 single-acting 40/55 2117 lbs / 960 kg 2 single-acting 33/45 3076 lbs / 1395 kg 1 double-acting 33/45 3120 lbs / 1415 kg 1 double-acting or 1 single-acting + return 45/60 2536 lbs / 1150 kg 1 double-acting 21.65 ft / 6.60 m 37/50 2844 lbs / 1290 kg 1 double-acting 22.97 ft / 7.00 m 40/55 3087 lbs / 1400 kg 1 double-acting 26.90 ft / 8.20 m 48/65 3396 lbs / 1540 kg 1 double-acting 91 NZ / 91 AZ 8.5/8.6 ft / 2.60/2.62 m 8.86 ft / 2.70 m 9.97/10 ft / 3.04/3.05 m 11.35/11.48 ft / 3.46/3.50 m 24.41 ft / 7.44 m 27.23 ft / 8.30 m Front mower 9.84 ft / 3 m 2 x rear mower 8.60 ft / 2.60 m Front mower 9.84 ft / 3 m 2 x rear mower 9.84 ft / 3 m 21
Options EUROHIT Tyres Tyres Additional Fenceline tedding system Chassis Jockey wheel 44 H alpin 13 x 5.0-6 44 N alpin 13 x 5.0-6 Manual 47 H 15 x 6.00-6 Optional Fenceline frame 47 N 15 x 6.00-6 Optional Manual 54 N 16 x 6.5-8 Optional Manual 61 N 15 x 6.00-6 Optional Manual 61 NZ 15 x 6.00-6 Optional Remote 69 AZ 16 x 6,5-8 18,5 x 8,5-8 Optional Remote 69 N 16 x 6.5-8 Optional Manual 69 NZ 16 x 6.5-8 Optional Remote 80 AZ 16 x 6.5-8 18.5 x 8.5-8 Optional Remote 80 NZ 16 x 6.5-8 Optional Remote 81 N 15 x 6.00-6* Optional Manual 81 NZ 15 x 6.00-6* Optional Remote 91 A / AZ 16 x 6.5-8 10.0/80-12*** Optional Remote 91 NZ 16 x 6.5-8** Optional Remote 95 A 16 x 6,5-8 Optional Optional (Swath curtain) 105 A 16 x 6,5-8 Optional Optional (Swath curtain) 130 A 16 x 6.5-8 Optional Optional (Swath curtain) * Middle rotors 220/50-6 *** Optional tyres for chassis 10/75-15 **Middle rotors 18.5 x 8.5-8 13 x 5,0-6 18,5 x 8,5-8 Fenceline frame 15 x 6.00-6 15 x 6,00-6 16 x 6,5-8 10/70-12 Manual wheel adjustment 22 18,5 x 8,5-8 10/75-15 95 A, 105 A, 130 A Multitast wheel zentrale Radverstellung
Hydraulic Hydrokomfort Shock absorber Swath Lighting fenceline system struts transmission Optional Optional Optional Optional Standard Optional Optional Standard Optional Optional Optional Standard Optional Optional Optional Standard Optional*** Optional Optional Optional Standard Optional*** Optional Optional Standard Standard Optional Optional Standard Standard Optional Optional Optional Standard Standard Optional Optional Standard Standard Optional Optional Optional Standard Standard Optional Optional Standard Standard Standard Optional Optional Optional Standard Standard Optional Optional Standard Standard Optional Standard Optional Standard Standard Optional Standard Optional (Swath curtain) Standard Optional Standard Optional (Swath curtain) Standard Optional Standard Optional (Swath curtain) Standard Optional Standard *** Shock absorber bar standard Single-acting hydraulic connection (61, 69, 80, 91 NZ) Hydrokomfort 44, 47, 54 single-acting Shock absorber Swath gear unit Warning signs to national road safety requirements. Double-acting hydraulic connection 91 AZ Hydrokomfort 61, 69, 80 single-acting Absorber bar standard on 61 N Lighting Hydraulic swath certain 95 A, 105 A, 130 A Hydrokomfort 91 doubleacting All data for information only, features may vary from country to country. 23
Quality for the future Machines with the cloverleaf mark are internationally successful with reliable quality and service. Cathodic electrodip priming and powder coating automobile paint quality Laser cutting machines for high-precision panel forming New durability centre for expendable parts The latest 3D construction Future-safe component part testing at the new Grieskirchen Technology and Innovation Centre, the most demanding working conditions are simulated and maximum limits are determined Pöttinger original expendable parts offer added value at a glance: high durability, precise fitting accuracy and constant availability. Product delivery Every Pöttinger customer has a right to the orderly delivery of the product by their Pöttinger sales agent, in order to ensure the guarantee. Alois Pöttinger Maschinenfabrik GmbH Industriegelände 1 A-4710 Grieskirchen Phone: +43 (0) 7248/600-0 Fax: +43 (0) 7248/600-445 Importer for UK: LandMec Pottinger Cantrell Works Bittaford, Ivybridge Devon PL21 OEZ England Phone: 01752 891285 Fax: 01752 891392 e-mail: info@landmecpottinger.co.uk www.landmecpottinger.co.uk Importer for Ireland: T. Traynor & Sons Ltd. Cashel Road, Clonmel Co. Tipperary Ireland Phone: 052/25 766 Fax: 052/25 802 e-mail: info@traynor.ie www.traynor.ie Sales & Service for Canada POETTINGER CANADA INC. 650, Route 112 St-Cesaire, J0L 1 T0, PQ CANADA Tel.: (450) 469-5594 Fax: (450) 469-4466 e-mail: sales.canada@poettinger.ca Sales & Service for the US POETTINGER CANADA INC. 650, Route 112 St.-Cesaire, J0L 1 T0, PQ CANADA Tel.: (450) 469-5594 Fax: (450) 469-4466 Cell: (450) 578-4081 e-mail: sales.us@poettinger.ca Australien office 82 Rutherford Road Viewbank 3084 Australia Phone: 0400 587 507 0407 100 453 Fax: 0394551878 e-mail: PottingerAust@aol.com www.poettinger.at www.poettinger.at e-mail: landtechnik@poettinger.at Importer for New Zealand: Foxton Machinery Main Road South SH 1, PO Box 145, Foxton phone (06) 363-7193 freephone (0508) 768846 Be more successful with EUROHIT/uk/0405 DD