INVERTER SERIES Varispeed E
VARISPEED E YASKAWA INVERTER DRIVE TECHNOLOGY Contents Content Page 2 Experience & Innovation A leader in Drives technology Page 3 Specifications Experience & Innovation For more than 90 years YASKAWA has been manufacturing and supplying mechatronic products for machine building and industrial automation. Its standard products as well as tailormade solutions are famous and have a high reputation for outstanding quality and durability. Page Connection Diagram Page 5 E Dimensions Page 6 E Dimensions IP5 Page Ratings & Type Descriptions Content A leader in Drives technology Extensive research and development has allowed YASKAWA to remain at the forefront of motion control and automation technology. This technological leadership has helped to modernise industries such as mining, steel, pulp and paper, chemical, automotive, packaging, machine tool and semiconductor. The is an Drive dedicated for the European markets. It was specially designed for fan & pump applications. It provides many useful and necessary characteristics to optimise your machine and to reduce time effort and costs through all steps of operation. YASKAWA Features For pumps and fans The was designed for HVAC applications requiring a quadratic torque characteristic. High slip braking (HSB) allows up to 3 times faster braking without the use of a braking transistor or resistor. The high speed overcurrent limiting function avoids overcurrent tripping and enables restart after power failure, motor stall prevention, attempted restart after malfunction, etc. The speed search function determines speed and direction of a coasting motor to the required reference speed in both directions. Environmentally friendly Reliable energy saving function allows considerable energy savings, especially under part load. 2 Low noise operation is enabled through the high switching frequency of IGBT during pump or fan operation. It greatly reduces noise due to magnetic transients in the motor and reduces abrasion. Suppression of harmonic distortion All inverters for a motor output higher than 18.5 kw use double diode supply to suppress harmonics to about 12%. User-friendly Installation and Operation Simple to operate The can be fully installed and operated using the digital operator. The operator is equipped with a parameter copy function and can even be used up to 3 m away with a standard cable. An optional LCD operator with plain text display and the same functions is available. Quick programming is enabled by showing the most important parameters or those YASKAWA VARISPEED E parameters which differ from the factory s parameter pre-settings. Detachable control terminals The inverter fan switches off when the motor is at a standstill. If necessary, it can be replaced without dismantling the unit. Global Specifications Certified to UL/cUL and CE Global fieldbus standards supported RS-85/22 (MEMOBUS protocol) supported as standard, Metasys protocol and Landis-Staefa protocol available, optional cards available for Profibus-DP, INTERBUS-S, CANopen and DeviceNet (LONworks, CC Link & ControlNet.
Specifications Three-phase 200 V 20P 20P 21P5 22P2 23P 25P5 2P5 20 20 2018 2022 20 203 205 2055 205 2090 2 Recommended maximum motor output [kw] *1 0.55 0.5 1.5 2.2 5.5 18.5 22 3 5 55 5 90 Rated output [kva] 1.2 1.6 2. 5. 8.8 12 1 22 2 32 55 69 82 1 Rated current [A] 3.2.1 9.6 23 31 5 58 1 85 1 15 180 2 283 36 Mains input output model CIMR-EC Max. output voltage Max. output frequency 200 Hz Rated input voltage and frequency Three-phase 200 to 20 V, 50/60Hz Suppression of harmonic distortion DC bus reactor Optional Built-in Double diode 12 pulse supply Not available Standard Three-phase 00 V model CIMR-EC 0P 0P 1P5 2P2 3P P0 5P5 P5 0 0 018 022 0 03 05 055 05 090 132 185 220 output Recommended maximum motor output [kw] *1 Mains input Three-phase 200 to 20 V (proportional to input voltage) 0.55 0.5 1.5 2.2 5.5 18.5 22 3 5 55 5 90 132 185 220 Rated output [kva] 1. 1.6 2.8 5.8 6.6 9.5 13 18 2 3 6 5 69 85 10 200 2 280 390 510 Rated current [A] 1.8 2.1 5.3.6 8. 12.5 1 2 31 39 5 60 5 91 2 0 180 216 30 506 65 Max. output voltage Three-phase 380 to 80 V (proportional to input voltage) Max. output frequency 200 Hz Rated input voltage and frequency Three-phase 380 to 80 V, 50/60Hz Suppression of harmonic distortion DC bus reactor Optional Built-in Double diode 12 pulse supply Not available Standard Ambient conditions Digital operator Inputs and outputs Protective functions Control Functions Mains General specifications Allowable mains voltage fluctuation From - to +10% Allowable mains frequency fluctuation From -5 to +5% Control methods Sinuisoidal pulse width modulation (V/f control) Speed control range 1:0 Frequency accuracy ±2 to 3% (25 C ± 10 C) Reference frequency signal to 20 ma (250 Ω), 0 to 10 V (20 kω) Acceleration/Deceleration time 0.01 to 6000 seconds (2 different independent acceleration and deceleration times) Braking torque Approximately 20% V/f characteristic Fully user-definable Motor protection Electronic thermal overload relay (PTC evaluation possible) Overload 120% of the inverter rated current for 1 min. Overvoltage Fault tripping occurs if the DC bus voltage exceeds 10 V with a 200 V, or 820 V with a 00 V inverter Undervoltage Fault tripping occurs if the DC bus voltage drops to a value less than 190 V with 200 V inverters, or 380 V with 00 V inverters Momentary power loss Operation can be continued if the power supply is restored within in 2 seconds Overheating of heat sink Controlled by thermistor Stall prevention limit Stall prevention during acceleration and deceleration, and operation can be set separately Earth fault Protection provided by electronic circuit DC bus charging indication The charging indicator lights up if the DC bus circuit voltage exceeds 50 V Digital inputs Seven inputs, of which 5 are fully user-definable Digital outputs 1 change-over contact for fault/ready signaling; 2 NO contacts fully user-definable with 3 different functions Analogue inputs 1 analogue input 0 to +10 V; 1 analogue input 0 to +10 V/-20 ma Analogue outputs 2 analogue outputs, 0 to 10 V, fully user-definable (current output 20 ma available as option) Displays 5-character, -segment display, 12 LED status indicators for forwards/reverse, local/remote control, alarm, ready, status of short menu, standard menu, modified parameters, autotuning, start, stop Buttons 9 buttons for displaying and programming the parameters and changing the speed, RUN button and STOP button Copying function Copy and verify function included Option LCD digital operator with plain text display and the same functions as the LED operator is available as an option. Case IP20 up to and including 18.5 kw, IP00 (IP20 optional) from 22 kw Relative humidity Maximum of 95% (non-condensing) Ambient temperature IP20 inverters from -10 to +0 C, IP00 from -10 to +5 C Storage temperature From -20 to +60 C (short-term in transit) Installation location Indoors (rooms free from corrosive gases and dust) Altitude of installation location Maximum of 1000 m Vibration Maximum of 9.8 m/s2 (1 G) from 10 to 20 Hz, maximum of 2 m/s2 (0.2 G) from 20 to 50 Hz *1: The recommended maximum connected load is specified for a four-pole standard motor. Choose the version of the converter that does not exceed the rated current of the motor. 3
Connection Diagram Connection for optional DC bus reactor Fuse Main contactor + 1 L1 + 2 Three-phase power supply L2 380 to 80 V L3 50/60 Hz Line Filter Motor U/T1 R/L1 S/L2 V/T2 T/L3 W/T3 + 1 PE S1 Forward Run/Stop S2 Reverse Run/Stop R/L1 L2 S/L2 L3 T/L3 S2 FM S6 Multi-step speed setting 2 20k AM S5 Multi-step speed setting 1 AM S3 Current display FM Frequency display S 20k AC Multi-functional analogue output (0 to 10 V, 2S5mA S Jog frequency selection SN SC SP S1 S Fault reset + 2 PE S3 External fault Multifunc. digital input L1 S6 E(G) +2V S E(G) SN 2k Reference setting 0 +10V SC +V - V, 20 ma SP E(G) A1 analogue input 1 2k 20mA A2 Multi-functional analogue input 2 MA AC MB Reference potentiometer MC -V - V, 20 ma 0V M2 Memobus RS-85/22 2k Fault contact output 0 +10V 2k M1 R+ M3 R- M 20mA During running Multi-functional digital output Zero speed 0V S+ SIG R+ RS+ S- shielded cable +2V shielded, twisted pair cable YASKAWA VARISPEED E IG
E Dimensions Fig. A Fig. B 200 V class inverters of 22 to 5 kw 00 V class inverters of 22 to kw 200 V/00 V class inverters of 0.55 to 18.5 kw Three-phase 200 V Three-phase 00 V Model CIMR EC 20P 20P 21P5 22P2 23P 25P5 2P5 20 20 2018 2022 20 203 205 2055 205 2090 2 0P 0P 1P5 2P2 3P P0 5P5 P5 0 0 018 022 0 03 05 055 05 090 132 185 220 Figure Dimensions in mm B H 10 280 T B1 H1 H2 126 266 Fig. A 200 19 186 285 20 20 216 335 250 25 00 50 258 195 220 385 35 35 600 3 250 55 00 25 325 00 500 55 850 885 360 380 30 5 820 855 280 Fig. B 5 M5 3 65.5 6 8 2.3 M6 3.2 M10.5 M12 21 2 5 63 86 8 108 0 1 10 39 126 266 200 19 186 285 20 20 216 335 25 50 258 220 325 550 283 535 50 25 325 00 35 3 5 M5 59 65.5 6 8 100 10 2.3 M6 105 13 850 360 30 55 925 380 5 895 10 15 50 120 3.2 M10.5 M12 820 916 15 16 10 10 125.5 21 36 1 500 Weight in kg 59 13 1 Fig. A d 100 10 t1 39 1 Fig. B D1 88 89 102 120 5
E Dimensions IP5 2 lifting holes Max. applicable motor output kw Dimensions in mm Total Heat Generation W H 22 W1 H1 H2 t1 20 600 Approx. Mass Mounting Holes d Total Heat Generation ø 10 M8 23 56 9 2.5 10 650 20 620 12 2.5 3 580 50 3 10 1 2.5 1 ø 1 M10 5 989 5 55 6 531 655 ø 12 M10 3 5 131 101 YASKAWA VARISPEED E Cooling method 2 25 18.5 Three-phase 00 V D Fan
Ratings & Type Descriptions CIMR- E C OP 1 Protection series Power supply Code European spec. C American spec. U Power supply 2 Three-phase 00 VAC output NEMA1/IP20 1 Three-phase 200 V 20P 20P 21P5 22P2 23P 25P5 2P5 20 20 2018 2022 20 203 205 2055 205 2090 2 Recommended maximum motor output [kw] *1 0.55 0.5 1.5 2.2 5.5.0 18.5 22.0.0 3.0 5.0 55.0 5.0 90.0 Rated output [kva] 1.2 1.6 2. 5. 8.8 12.0 1.0 22.0 2.0 32.0.0 55.0 69.0 82.0 1 Rated current [A] 3.2.1.0 9.6.0 23.0 31.0 5.0 58.0 1.0 85.0 1 15 180 2 283 36 Max. output voltage Three-phase 200 to 20 V (proportional to input voltage) Max. output frequency 200 Hz Three-phase 00 V model CIMR-EC 0P 0P 1P5 2P2 3P P0 5P5 P5 0 0 018 022 0 03 05 055 05 090 132 185 220 Recommended maximum motor output [kw] *1 output 0 Code Three-phase 200 VAC model CIMR-EC Code IP00 0.55 0.5 1.5 2.2.0 5.5 Rated output [kva] 1. 1.6 2.8.0 5.8 6.6 9.5 13.0 18.0 2.0.0 3.0 6.0 5.0 69.0 85.0.0.0 18.5 22.0.0 3.0 5.0 55.0 5.0 90.0 Rated current [A] 1.8 2.1 5.3.6 8. 12.5 1.0 2.0 31.0 39.0 5.0 60.0 5.0 91.0 2 Max. output voltage Three-phase 380 to 80 V (proportional to input voltage) Max. output frequency 200 Hz 0 132 185 220 10 200 2 280 390 510 180 216 30 506 65 *1: The recommended maximum connected load is specified for a four-pole standard motor. Choose the version of the converter that does not exceed the rated current of the motor.
YASKAWA Electric Europe GmbH Hauptstr. 185 6560 Eschborn Deutschland / Germany +9 6196 569- info@yaskawa.de www.yaskawa.eu.com V Specifications are subject to change without notice for ongoing product modifications and improvements. YASKAWA Electric Europe GmbH. All rights reserved. Literature No. YEG_INV_E_GB_v1_0608 Printed in Germany June 2008