OMMRIL Pneumatic valves and systems have been used for controls in the HV market for the past several decades. In the early days of building automation systems, before the advent of control networks, control systems consisted of pneumatic controls or wire bundles connected to relays, switches, potentiometers, and actuators. Retrofit Kits utterfly Valves 09/07/17 abling was installed in a point-to-point fashion between electrical panels, the sensor inputs and actuator outputs. The functionality of these control systems are relatively rudimentary and inflexible. With the dawn of electronic actuation coupled with newly advanced building automation systems, it only follows that many pneumatically controlled valves are now being partially or completely replaced with electronic valve assemblies. The advent of solid state technology offers a means of using logic circuits to replace wire and relays. Pneumatic controls and electrical panels have given way to direct digital controllers, which are programmed or configured. Our Retrofit Kits make the transition from Pneumatic to easier. In those instances when an existing butterfly valve needs to be fitted with the proper electronic actuator, ray has a quick, easy, and cost effective solution. eatures and enefits ssembly ctuation utterfly Valves up to 20", 2-Way or 3-Way lectronic ctuation On/Off, loating, & Modulating onvenient ax orms asy Installation Manual Override 24V or 120V 2-Position or loating Modulating 0(2)-10V or 0(4)-20m Spring Return Positive Position eedback Weather Proof nclosure Optional Low Voltage OMMRIL KR-1
Retrofit Kits - utterfly Valve Retrofit Library 1 to 12 utterfly Retrofit Library 1 to 4 xisitng Valve Manufacturer xisitng Valve Model # 1 1-1/2 xisting Valve Size 2 2-1/2 3 4 enterline Series 200 (/LT, W, WL, ) Series 205 (NT, NLT) Series 225 (-285) Series 400 (V) 2 2 2 2 hallenger VM R1 R1 R1 R2 Keystone R1 / R2 221 / 222 310 / 312 K1 K1 K6 K1 K1 K7 K1 K1 K7 K2 K2 K7 Nibco L / W 2000 Series L / W 3000 Series NO1 NO1 NO3 NO3 Watts -03 / -04 utterfly Retrofit Library 5 to 12 xisitng Valve Manufacturer xisitng Valve Model # 5 6 xisting Valve Size 8 10 12 enterline Series 200 (/LT, W, WL, ) Series 205 (NT, NLT) Series 225 (-285) Series 400 (V) 4 4 4 4 5 5 5 5 6 6 6 6 hallenger VM R2 R3 R4 R5 R5 Keystone R1 / R2 221 / 222 310 / 312 K3 K3 K8 K3 K3 K8 K4 K4 K9 K5 K5 K10 K5 K5 K10 Nibco L / W 2000 Series L / W 3000 Series NO5 NO5 NO6 NO6 NO7 NO7 Watts -03 / -04 WS3 WS4 WS5 Indicates that we don't currently have dimensional information to retrofit this valve. Please fill out the utterfly Valve Retrofit form (orm V-01). When ordering please use the following model numbering system: R (Valve Size) (2 or 3-way) - Kit Number from bove / ctuator, ex. Nibco 6 2-way L/W 2000 = R62-NO4/ctuator KR-2 OMMRIL
Retrofit Kits - utterfly Valves Retrofit orm Please fill in the following dimensions. model number will be assigned by ray after receiving this fax form. imensions should be measured to closest 0.001 inch. ll dimensions should be measured in inches. STION - 1 STION - 2 STION - 3 Quantity Nominal Valve Size Mounting Style (2, 2, or 2 below) imensions: = Style (3, 3, 3, or 3 below): imensions: = Valve Manufacturer (if known) = = Model No. (if known) = = Valve Style: re Mounting Holes rilled and Tapped: = No, Hole iameter H = 2-Way or 3-Way Yes, olt Size Threads/inch Note: imension (for keywayed, flatted, or pinned) is it perpendicular or TUTION: (heck all that apply) parallel to disc. On/Off Tri-State Modulating Spring Return ITIONL OMMNTS 24V 120V Weather Proof nclosure pproximate Torque Required (in-lbs.) Mounting and Styles Mounting Style - 2 Style - 3 / Keywayed iameter Style - 3 / Wooddruff Key H (4) Mounting Holes Mounting Style - 2 iameter Style - 3 / ouble iameter Style - 3 / Hexed (4) Mounting Holes iameter lat to lat Mounting Style - 2 Style - 3 / Pinned iameter Style - Square (2) Mounting Holes iameter OMMRIL KR-3
Retrofit Kits - utterfly Valve xploded View eatures of the ray Retrofit utterfly Valve Linkage: Manual Override utton ctuator May be used in high-stress applications May be used in high-temperature applications Makes pneumatic to electronic conversion simple wide range of control systems can be used High close-off pressures available for most applications May use tandem actuators for higher close-off pressures asy retrofit on nonstandard valves vailable actuators include: -140/210/280, -310, S-180 Series and ray s Industrial Series ctuator where applicable. rive Pin Manual Override Handle ctuator racket olts, Nuts, and Lock Washers included Identification Tag: Model number, ate of purchase KR-4 OMMRIL
Retrofit Kits - utterfly Linkage imensions -epth -epth IMNSIONS - 2-6 with / Series ctuators Please reference illustration above utterfly Valve Retrofit Linkage onnection Model # Prefix in. mm in. mm in. mm in. mm in. mm R2(2 or 3) 2 50 3.3 84 9.8 249 3.5 89 4.6 117 R250(2 or 3) 2.5 65 3.3 84 9.8 249 3.5 89 4.6 117 R3(2 or 3) 3 80 3.3 84 11.0 279 3.5 89 4.6 117 R4(2 or 3) 4 100 3.3 84 11.0 279 3.5 89 4.6 117 R5(2 or 3) 5 125 3.3 84 11.0 279 7.1** 180** 4.6** 117** R6(2 or 3) 6 150 3.3 84 11.0 279 5.9** 150** 4.0 102 ** Indicates tandem mounted actuators. Indicates valve/actuator combination is not recommended. imensions listed are approximate. In some cases custom brackets and pins are required. Largest actuator(s) dimension shown IMNSIONS, 2-16 with Industrial Series ctuators Please reference illustration above utterfly Valve Retrofit Linkage onnection Model # Prefix in. mm in. mm in. mm in. mm R2(2 or 3) 2 50 4.0 102 8.8 224 15.6 396 R250(2 or 3) 2.5 65 4.0 102 8.8 224 15.6 396 R3(2 or 3) 3 80 4.0 102 8.8 224 15.6 396 R4(2 or 3) 4 100 4.0 102 8.8 224 15.6 396 R5(2 or 3) 5 125 4.0 102 8.8 224 15.6 396 R6(2 or 3) 6 150 4.0 102 8.8 224 15.6 396 R8(2 or 3) 8 200 4.0 102 8.8 224 15.6 396 R10(2 or 3) 10 250 4.0 102 8.8 224 15.6 396 R12(2 or 3) 12 300 4.0 102 8.8 224 15.6 396 R14(2 or 3) 14 350 4.0 102 8.8 224 15.6 396 R16(2 or 3) 16 400 4.0 102 8.8 224 15.6 396 Indicates valve/actuator combination is not recommended. imensions listed are approximate. In some cases custom brackets and pins are required. Largest actuator(s) dimension shown OMMRIL KR-5