OCS Industries. Cast Iron Radiation, Convectors and Much More.

OCS Industries A Division of the CIDC Corporation www.ocsind.com Heat Transfer Specialists SINCE 1917 ANTICIPATING we constantly manufacture for stock YOUR NEEDS we keep the LARGEST INVENTORY IN THE NATION Phone: 718.33111 E-Mail: orders@ocsind.com info@ocsind.com ocsind@optonline.net Cast Iron Radiation, Convectors and Much More

CONTENTS CAST BASEBOARD DURABLE CAST IRON BASEBOARD l Accessories l Ratings l Dimensions l Weights 3 4 SLENDERIZED CAST TUBE Free-Standing Cast Iron Radiator WALL HUNG Slenderized Cast Iron Radiator 5 6 CAST RAY Durable Cast Iron Radiators 5X20 CLEOPATRA Elegant Cast Iron Radiator 7 CONVECTOR CABINETS All Types & Dimensions 8-9 BASE VECTOR Cabinets & Elements l Dimensions l Ratings 10 BRASS VALVES CONVECTOR ELEMENTS All Types & Dimensions CAST IRON STEEL COPPER Back Cover 11 12-13 14-15 Dear Valued Customer, OCS Industries takes pride in the fact that it has been the convector and cast iron radiator source since 1917, with millions of satisfied homeowners enjoying the quality and durability of our products for more than 80 years. We reiterate our continuted commitment to quality, price, and outstanding service to you, our valued customers. We look forward to serving you for another eight decades. Wishing you continued success. O.C.S. 2 tel: 718.33111 fax: 718.338.8529 website: www.ocsind.com

Cast Baseboard DURABLE CAST IRON BASEBOARD dimensions l ratings I B R WATER FLOW PRESS, DROP ENT/EXIT PRESS, DROP PER/FT ADDT L 150 F 160 F 170 F 180 F 190 F 200 F 210 F 215 F 220 F IBR Ratings BTU/HR/FT 1 G.P.M. 500 LBS/HR 98.2* 2* 370 440 500 570 640 700 770 800 830 4 G.P.M. 2000 LBS/HR 582.4* 411.8* 390 470 530 600 680 740 810 850 880 YOUR GUARANTEE OF PERFORMANCE. NARROW TRIM LINES ALLOWS UNIT TO BLEND WITH ANY DECOR. THE CAST BASEBOARD WITH ITS UNIQUE INTEGRAL CAST FIN DESIGN MAKES FOR HIGH EFFICIENCY AND MAXIMUM OUTPUT. *MILLINCHES STEAM RATING 780 BTU/HR/FT (5 SQ FT EDR) MAXIMUM ALLOWABLE WORKING PRESSURE - 30 PSI, WATER: 15 PSI, STEAM. NOTE: THE PRESSURE DROP MUST BE SEPARATELY CALCULATED FOR EACH INDIVIDUAL ASSEMBLY WATER CONTENT 0.3 GALLONS PER LINEAR FOOT. Cast Baseboard Cast Iron Base Board per linear ft. Accessories WEIGHT/LB. PER FT. Approx. 17 PART # Valve Enclosures (Inter, Right or Left) BVE Dummy Covers per foot BDC4 4" End Cap (Right) BECR4 4" End Cap (Left) BECL4 6" End Cap (Right) BECR6 6" End Cap (Left) BECL6 Inside Corner BIC 6" Flexible Connector FLEX6 9" Flexible Connector FLEX9 ¾" Push Nipples BPN34 ¾" Vent Plugs BVP34 Tie Bolts with Nuts BTB Top or Bottom Support BTS CastSlope Assembly Tool BAT Dimensions A A FRONT VIEW B D C Assembly Information NOTE: For additional part numbers of other baseboard assemblies refer to master Part# list E 9 7/8 HEIGHT A 9 7 /8 B 19 1/8 7 INLET C 7/8 1 1 /8 OUTLET D 2 7 /87/16 DEPTH E ¾ 2 7 /16 TAPPINGS 3 /4 BACK VIEW Part # 1½FT. 2FT. 2½FT. 3 FT. 3½FT 4 FT. 4½FT. 5 FT. 5½FT. 6 FT. BAR1 12" R.H. BAL112 18" L.H. BAP112 18" PANEL BAR2 R.H. BAL2 L.H. BAC2 INTER BAP2 PANEL FINS TIE BOLT PUSH NIPPLE BOTTOM SUPPORT Installation of panels longer than requires push nipples, adhesive and nuts & bolts to be applied wherever sections meet. A special assembly tool is available. Installation of panels 6 ft. or longer requires top or bottom support. NOTE: l=b=r ratings are determined from tests made in accordance with the l=b=r testing and rating code for baseboard type radiation, including an allowance of 15% for heating effect permitted by the code. Standard flow rate of 500 lbs. (1 gpm) per hour must be used. Rating based on active length. Active length same as total length. tel: 718.33111 fax: 718.338.8529 website: www.ocsind.com 3

Cast Tube Slenderized Cast Tube Slenderized DURABLE CAST IRON RADIATORS dimensions l ratings Cast Tube FREE STANDING CAST IRON RADIATORS WEIGHT/LB. PER SECTION Approx. Cast Tube 4 x 19 7¼ Cast Tube 4 x 25 8½ Cast Tube 6 x 25 13¾ ACCESSORIES PART # 1 Push Nipples TPN1 1 Plug TP1 1 ¼ Plug TP114 2 Pedestal PED2 3 Pedestal PED3 Ratings SQ. FT./EDR 6 x 25 STOCK SPECIAL ORDER NO. OF 1¾ 19 HEIGHT 25 HEIGHT 25 HEIGHT SECTIONS PER SECTION 1.6SQ.FT. PER SECTION 2.0 SQ.FT. PER SECTION SQ.FT. PER SECTION 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 10.5 1 17.5 2 31.5 3 3 42.0 4 49.0 52.5 5 59.5 6 6 70.0 7 7 6.4 9.6 1 19.2 22.4 2 28.8 32.0 3 38.4 41.6 4 4 51.2 5 57.6 60.8 6 67.2 70.4 T4194 T4196 T4198 T41910 T41912 T41914 T41916 T41918 T41920 T41922 T41924 T41926 T41928 T41930 T41932 T41934 T41936 T41938 T41940 T41942 T41944 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 T4254 T4256 T4258 T42510 T42512 T42514 T42516 T42518 T42520 T42522 T42524 T42526 T42528 T42530 T42532 T42534 T42536 T42538 T42540 T42542 T42544 NOTE: HEAT EMISSION - BASED ON 240 BTU (STEAM) PER SQUARE FOOT PER HOUR MAXIMUM WORKING PRESSURE: 15 LBS. STEAM, 30 LBS. WATER 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 T6254 T6256 T6258 T62510 T62512 T62514 T62516 T62518 T62520 T62522 T62524 T62526 T62528 T62530 T62532 T62534 T62536 T62538 T62540 T62542 T62544 AV. WATER TEMP. IN RADIATOR HEAT EMISSION BTU PER SQ. FT. Dimensions F B C 220 215 210 200 190 180 170 160 150 250 240 230 210 190 170 150 130 110 A D E 4 x 25 4 x 19 4 x 19 0.08 Gallons Per Section 4 x 25 0.12 Gallons Per Section 6 x 25 0.17 Gallons Per Section SIZE A B&C D E *F 4 x 19 15 7 ₁₆ 4 ½ 2 11/16 19 17 13/16 4 x 25 21 7 ₁₆ 4 ½ 2 11/16 25 23 13/16 6 x 25 21 7 ₁₆ 6 7/8 2 11/16 25 23 13/16 * LEGLESS - OVERALL HEIGHT. TAPPING - TOP-1 BOTTOM-1¼ ADD ½ TO FOR EACH BUSHING. END SECTION REGULARLY SUPPLIED WITH 1 TOP TAPPING AND 1¼ BOTTOM TAPPINGS. NOTE: CAST TUBE RADIATORS ARE SOLD IN EVEN * NUMBER OF SECTIONS UP TO A MAXIMUM OF 44 SECTIONS. FOR ASSEMBLIES FROM 26 TO 44 SECTIONS, ONE EXTENDED CENTER LEG SECTION IS FURNISHED. ODD SIZES AVAILABLE UPON REQUEST 4 tel: 718.33111 fax: 718.338.8529 website: www.ocsind.com

Wall Hung Slenderized LEGLESS CAST IRON RADIATORS DIMENSIONS RATINGS PRICES AVAILABLE WITH HEAVY DUTY BRACKETS 4x19 4x25 WEIGHT / LBS. PER SECTION 7 1 4" 8 1 2" PRICE PER SECTION $25 $27 For Part # s refer to master Part # List 4x19 or 4x25 Wall Hung Radiators are available 4 thru 44 sections For Ratings & Dimensions see page 4 Odd sizes pavailable upon request 4 x 19 or 4 X 25 With No Legs Dimensions ADJUSTABLE RADIATOR BRACKETS FOR 1/2 1 1/8" 2 1/2" 1 1/2" TIE BOLT 1/4" x 3 1/4" BUTTONS FOR WALL & TUBULAR A Wall Hung Heavy Duty Brackets 1 1/8" 1/2" x WALL SHIPPING PRICE PER PART # WEIGHT / LBS. PIECE BWH1 3 LBS $55 8 TUBULAR C 1 1/4 3 1/4 SHORT HOOK STANDART HOOK B BOTTOM OF RADIATOR tel: 718.33111 fax: 718.338.8529 website: www.ocsind.com 5

CastRay 5 x 20 DURABLE CAST IRON RADIATORS DIMENSIONS RATINGS PRICES COMBINES CONVECTION WITH RADIANT HEAT! Customized Features Sanitized Heat Evenly Circulated Heat Consistent Heat Retention Cast Iron Durability Perfect for Remodeling Can be Recessed* Ratings CastRay Cast Iron Radiators Specifications 5 20 4 5 8" with snap on grill ACCESSORIES Snap on Grill (per section when ordered separately) 1" Push Nipples ALL AIR VENT TAPPINGS 1/8" ALL BOTTOM TAPPINGS 1 1/4" SNAP ON DESIGNER GRILL EASY TO REMOVE & TO REPLACE WEIGHT/LB. PER SECTION Approx. 14 PART # RSOG RGR TPNI TPN1 PRICE/$ PER SECTION $29.90 2.05 1.25 ea NOTE: CUT OUT FOR RECESS SHOULD BE 1/2" LONGER AND 1/4" HIGHER THAN RADIATOR MAXIMUM WORKING PRESSURE: 15 LBS. STEAM, 30 LBS. WATER ODD SIZES AVAILABLE ON REQUEST WATER VOLUME PER SECTION 0.15 GALLONS STOCK SPECIAL ORDER SIZE / NO. OF SECTIONS 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 PART NUMBER R04 R06 R08 R10 R12 R14 R16 R18 R20 R22 R24 R26 R28 R30 R32 R34 R36 R38 R40 R42 R44 OVERALL 9 13 1 2 18 22 1 2 27 31 1 2 36 40 1 2 45 49 1 2 54 58 1 2 63 67 1 2 72 76 1 2 81 85 1 2 90 94 1 2 99 FREE STANDING RATING SQ. FT* APPROX. 9.0 1 1 22.5 2 31.5 3 40.5 45.0 49.5 5 5 6 67.5 72.0 7 81.0 8 90.0 94.5 99.0 ODD SIZES AVAILABLE UPON REQUS *IMPORTANT NOTE: 10% 15% SHOULD BE ADDED TO ROOM REQUIREMENTS AND 20% WHEN UNIT IS RECESSED BEFORE SELECTING RADIATOR SIZE. *RATING PER SECTION 5 RATING º 5 x NO. OF SECTIONS APPROXIMATE SHIPPING WEIGHT PER LBS. 6 tel: 718.33111 fax: 718.338.8529 website: www.ocsind.com

Cleopatra ELEGANT, DURABLE CAST IRON RADIATOR DIMENSIONS RATINGS PRICES Ratings Per Section NUMBER OF SECTIONS 4 6 8 10 12 14 16 18 20 PART NUMBER CLEO4 CLEO6 CLEO8 CLEO10 CLEO12 CLEO14 CLEO16 CLEO18 CLEO20 OVERALL 15 18.38 0 30.88 32 44 48.96 55.08 61.20 RATING SQ. FT. EDR 18 18.42 6 30.70 38.84 42.98 49.12 56 61.40 Square Ft. - EDR 7 Water Output BTU/H (180 F Avg. Temp.) 521 Steam Output BTU/H (215 F Avg. Temp.) 736 Shipping Weight 7 26 LBS. MAXIMUM WORKING PRESSURE: 15 PSI STEAM, 30 PSI WATER WATER CONTENT - 0.62 GAL/SECTION Accessories ITEM 1-1/4 Threaded Treaded Push Nipples 1-1/4 Special Gasket Assembly Tool PART # CLEOSB114 CLEOG114 CLEOTOOL 7.90 ea. 9 ea. 99.00 ea. Dimensions All Steam Vent Tappings 1/8 NPT Pipe Tappings 1 NPT top. 1-1/4 bottom 3-1/16 8-15/16 1 NPT TOP pipe connection bottom 1-1/4 30 23-1/2 1/8 female NPT (steam, vent) 9-3/4 4-3/16 List Price Per Section...$119 tel: 718.33111 fax: 718.338.8529 website: www.ocsind.com 7

Convector Cabinets TYPE FBS l 20 & 24 HIGH dimensions l ratings TYPE FBS FBS Cabinets with rounded corners is similar to type F except that a lower air intake grille has been added. The lower flange permits one to mount this cabinet on the rough floor, if desired, without interfering with the front panel. CABINET S AND DEPTHS 1/2 LONGER THAN NOMINAL CUSTOMIZED HEIGHT & DEPTHS AVAILABLE UPON REQUEST 4 Cabinet 8 Cabinet PART # APPX. WT. PART # APPX. WT. C416 12 C420 14 2¼" C424 16 C428 18 C432 20 2" C436 22 4 C440 24 8 C444 26 C448 28 C452 30 C456 32 C460 34 4" C464 36 4 ½" C816 14 C820 18 C824 20 C828 24 C832 28 C836 32 C840 46 C844 40 C848 44 C852 48 C856 52 C860 56 C864 60 PRICE PER QUOTE ONLY 4¼" 41/8" 8 ¼" 8 ½" 6 Cabinet 10 Cabinet PART # APPX. WT. PART # APPX. WT. 6 C616 13 C620 16 C624 18 C628 21 C632 24 C636 27 C640 30 C644 33 C648 36 C652 39 C656 42 C660 45 C664 48 6 1/8" 6 ½" STANDARD GAUGES: 18 front & top, 20 side & back 3¼" 31/ 10 C1016 16 C1020 20 C1024 22 C1028 27 C1032 32 C1036 37 C1040 42 C1044 47 C1048 52 C1052 57 C1056 62 C1060 67 C1064 72 PRICE PER QUOTE ONLY Accessories 8" 103/8" 10 ½" 5 ¼" 5 1/8" NOTE: Cabinet Type FBS, STOCK ITEM Prices for cabinet types F l W l SW l S l SF l SFB l R l RB l SB per quote only (see page 9) Access Door with Knob Cam Lock Knob Operated Dampers Knockouts or Hole for Piping 1/2 Rigid Insulation Extra Grill in Backshield 8 tel: 718.33111 fax: 718.338.8529 website: www.ocsind.com

Customized Cabinet Types DESCRIPTIONS DIMENSIONS Type F Type SF Type SFB May be installed either fully exposed or semi-recessed. When used recessed make recess 1/2" longer than the overall length and 1/4" higher than cabinet height. Similar in design to the "F" type except that the outlet grille is located in the sloping top, and must be used fully exposed only. Similar in design to the "SF" type except that a lower grille has been added. Type S Type W Type SW A 1 3/4" Semi-recessed with 3 sided overlap top and ends Dimension "A" Cabinet 4 1/2" Deep 1 1/2" Cabinet 6 1/2" Deep 3 1/2" Cabinet 8 1/2" Deep 5 1/2" Cabinet 10" Deep 7 1/2" FLOOR LINE 6" WALL HUNG Designed for those installations where a floor standing installation is not feasible. FLOOR LINE 6" WALL HUNG Identical to the "W" type except that there is a sloping top and the outlet grille is located in the top rather than in the front panel. Type R Type RB Type SB 1" 1" 1 3/4" 1 3/4" 1" Fully recessed type with 3 sided overlap top and ends. 1/4" 1" 1/4" Fully recessed type except that a lower grille has been added, with 4 sides overlap, also available with 3 sided overlap top and ends. 1 3/4" A Dimension "A" same as Type "S" Semi-recessed except that a lower grille has been added, with 4 sides overlap, also available with 3 sided overlap top and ends All cabinets come standard with 18 front & top gauges and 20 side & back gauges. Most cabinets available with knob dampers, access doors and 1/2" rigid insulation. Available In 16 Gauge For Institutional Applications in all depths, lengths & heights tel: 718.33111 fax: 718.338.8529 website: www.ocsind.com 9

Base Vector CABINETS & ELEMENTS DIMENSIONS RATINGS PRICES Prices 72" 84" 96" 108" 1 Dimensions 4" DEPTH PRICES CABINET ELEMENT $184 VC424 $199 201 216 231 249 264 279 294 311 12" 4" 1 1/2" VC436 VC448 VC460 VC472 VC484 VC496 VC4108 VC4120 4 1/2" 12" HIGH FLOOR MOUNTED SLOPE TOP ENCLOSURE 45 199 220 259 323 366 419 455 498 VE4 24 VE4 36 VE4 48 VE4 60 VE4 72 VE4 84 VE4 96 VE4 108 VE4 120 6" 3 1/2" 6 1/2" 6" DEPTH PRICES CABINET ELEMENT $215 VC624 $200 231 249 264 279 293 311 325 343 9 1/4" PART# PART# PART# PART# 45 VC636 VC648 VC660 VC672 VC684 VC696 VC6108 VC6120 235 295 352 447 513 577 643 709 VE624 VE636 VE648 VE660 VE672 VE684 VE696 VE6108 VE6120 180 F 190 F 200 F Steam Capacities Sq. Ft. EDR 65ºF Entering Air Ratings CABINET HEIGHT 12" 4" DEEP 6" DEEP 72" 84" 96" 108" 1 72" 84" 96" 108" 1 72" 84" 96" 108" 1" 72" 84" 96" 108" 1 1.9 2.9 7.2 8.3 10.4 2.0 7.8 9.1 10.2 11.4 7.3 9.8 11.1 14 11.5 1 31.5 3 44.5 51.5 5 64.5 8.6 10.1 11.6 1 1 4.5 7.7 9.4 11.1 1 1 6.6 8.4 10.2 12.0 13.8 1 17.44 2 34.5 4 5 6 72.0 81.5 91.0 10 tel: 718.33111 fax: 718.338.8529 website: www.ocsind.com

Convector Elements CAST IRON DIMENSIONS RATINGS PRICES Ratings 6 DEEP AVAILABLE 4" & 6" DEEP 4 DEEP 180 F CABINET HEIGHT CABINET HEIGHT 4" DEEP 6" DEEP 4" DEEP 6" DEEP 19" 23" 27" 31" 35" 39" 43" 47" 55" 63" 1.5 1.9 2.5 6.4 7.7 9.0 1.8 2.1 2.5 2.9 3.8 6.2 ELEMENT PART # CI 419 CI 423 CI 427 CI 431 CI 435 4" CI 439 CI 443 CI 447 CI 455 CI 463 CI 619 CI 623 CI 627 CI 631 CI 635 6" CI 639 CI 643 CI 647 CI 655 CI 663 Dimensions & Prices "L" DIMENSION 19" 23" 27" 31" 35" 39" 43" 47" 55" 63" 19" 23" 27" 31" 35" 39" 43" 47" 55" 63" "C-C" DIMENSION 16 3 4" 20 3 4" 24 3 4" 28 3 4" 32 3 4" 36 3 4" 40 3 4" 44 3 4" 52 3 4" 60 3 4" 16 3 4" 20 3 4" 24 3 4" 28 3 4" 32 3 4" 36 3 4" 40 3 4" 44 3 4" 52 3 4" 60 3 4" APPROX. WEIGHT/LBS. 27 1 2 31 1 2 35 1 2 41 1 2 45 49 1 2 54 1 2 63 71 81 53 59 71 79 93 97 103 116 131 153 OCS PRICE $211.00 250.00 339.00 355.00 380 410 470 541.00 639.00 70 330 380 502.00 540 579.00 650 70 790 949.00 1100 190 F 200 F 215 F Steam Capacities EDR 19" 23" 27" 31" 35" 39" 43" 47" 55" 63" 19" 23" 27" 31" 35" 39" 43" 47" 55" 63" 19" 23" 27" 31" 35" 39" 43" 47" 55" 63" 1.6 2.0 4.5 1.8 5.9 9.0 11.0 1 15.0 30.0 2.5 3.8 5.0 5.8 9.9 7.7 10.8 1 2 2 32.0 39.0 4 55.0 2.0 5.0 5.9 6.8 7.5 11.0 1 15.0 21.5 2 3 3 2.9 6.2 7.4 8.8 10.3 4.5 5.9 7.3 9.7 11.2 2 2 30.0 3 41.0 49.0 5 CUSTOMIZED ELEMENT S AVAILABLE UPON REQUEST IMPORTANT NOTE: 10-15% SHOULD BE ADDED TO ROOM REQUIREMENTS CABINET TYPES FBS, SF, SFB, R, RB, S, SB, W, SW. (Nominal Heights ). tel: 718.33111 fax: 718.338.8529 website: www.ocsind.com 11

Convector Elements STEEL DIMENSIONS RATINGS PRICES Ratings & Prices 4 6 8 10 ELEMENT PART # SE 416 SE 420 SE 424 SE 428 SE 432 SE 436 SE 440 SE 444 SE 448 SE 452 SE 456 SE 460 SE 464 SE 616 SE 620 SE 624 SE 628 SE 632 SE 636 SE 640 SE 644 SE 648 SE 652 SE 656 SE 660 SE 664 SE 816 SE 820 SE 824 SE 828 SE 832 SE 836 SE 840 SE 844 SE 848 SE 852 SE 856 SE 860 SE 864 SE 1016 SE 1020 SE 1024 SE 1028 SE 1032 SE 1036 SE 1040 SE 1044 SE 1048 SE 1052 SE 1056 SE 1060 SE 1064 *EDR RATING 9.0 12.0 14.5 17.5 20.5 2 2 29.0 32.0 37.5 40.5 4 1 1 2 30.5 39.0 4 4 52.0 5 60.5 65.0 2 31.5 3 42.0 4 52.0 5 62.5 67.5 72.5 7 31.0 4 49.0 55.0 61.0 6 72.0 79.0 85.0 91.0 APPROX. WT./LBS. 4 5 1 4 6 1 2 7 3 4 9 10 1 4 11 1 2 12 3 4 14 15 3 4 16 1 2 17 3 4 19 6 1 2 7 3 4 9 3 4 10 1 4 11 1 2 12 3 4 14 15 1 4 16 1 2 17 3 4 19 20 1 4 21 1 2 9 10 1 4 12 1 2 14 1 2 16 17 3 4 19 3 4 21 1 4 23 24 3 4 26 1 2 28 1 4 30 11 13 15 17 19 21 23 25 27 29 31 33 35 OCS PRICE $ 165.00 170 190 20 220 240 171.00 190 20 251.00 270.00 292.00 312.00 339.00 365.00 200 200 200 210 20 242.00 265.00 230 311.00 330 359.00 382.00 400 280 280 290 300 30 330 351.00 380.00 400 430.00 462.00 490.00 50 Element Lengths 1/2" shorter then nominal Tapped: 1/2" 2" Tapped: 3/4" 64" Center-to Center NOTE: CUSTOMIZED S UP TO 1 LONG ARE AVAILABLE ELEMENTS MAY BE SQUEEZED TO REDUCE THE DEPTH SIZE ASSORTED HEADERS AVAILABLE NOMINAL 64 OVERALL 15 1/2 19 1/2 23 1/2 27 1/2 31 1/2 35 1/2 39 1/2 43 1/2 47 1/2 51 1/2 55 1/2 59 1/2 63 1/2 10 8 6 4 Tapped 1 1/4" "C-C" DIMENSIONS 13 11/16 17 11/16 21 11/16 25 11/16 29 11/16 33 11/16 37 11/16 41 11/16 45 11/16 49 11/16 53 11/16 57 11/16 61 11/16 12 tel: 718.33111 fax: 718.338.8529 website: www.ocsind.com

Convector Elements STEEL DIMENSIONS RATINGS Steam Capacities Sq. Ft. EDR 65ºF Entering Air FBS, F, R, RB, S, SB,W INSTALLED HEIGHT 4" DEEP 6" DEEP 8" DEEP 10" DEEP 64 11.0 1 1 2 2 29.0 32.0 34.5 39.5 1 29.5 3 37.5 41.5 4 50.0 5 5 62.0 15.0 20.0 29.5 3 39.0 4 4 5 5 6 6 72.5 One Pipe Steam bottom supply bottom supply bottom return 1 2 30.0 3 41.5 47.5 5 59.0 65.0 71.0 7 82.5 8 INSTALLED HEIGHT 4" DEEP 6" DEEP 8" DEEP 10" DEEP 9.0 12.0 14.5 17.5 20.5 2 2 29.0 32.0 37.5 40.5 4 Piping Connections Vapor System top supply bottom return Vapor System bottom supply bottom return 1 1 2 30.5 39.0 4 4 52.0 5 60.5 65.0 2 31.5 3 42.0 4 52.0 5 62.5 67.5 72.5 7 31.0 4 49.0 55.0 61.0 6 72.0 79.0 85.0 91.0 180 F FBS, F, R, RB, S, SB, W 190 F FBS, F, R, RB, S, SB, W 200 F FBS, F, R, RB, S, SB, W 215 F Steam Capacities Sq. Ft. EDR E.A.T.= 65ºF SF, SFB, SW (Slope Top) Height shown is for the "SW" Cabinet. Ratings listed above also apply to the "SF" & "SFB" cabinets which are 6" higher. Ratings INSTALLED HEIGHT 4" DEEP 6" DEEP 8" DEEP 10" DEEP 64" 64" 64" 64" 1.3 1.8 6.4 1.4 1.9 2.4 1.5 2.1 6.6 7.5 12.5 1 1 21.5 27.5 30.5 3 3 39.5 42.0 45.0 2.1 7.3 8.1 8.7 9.4 10.0 5.9 6.6 7.3 8.8 9.5 10.2 10.9 2.5 6.4 7.2 7.9 8.7 9.5 10.3 11.1 11.8 1 2 29.5 3 37.5 41.5 4 49.5 5 57.5 61.5 2.4 7.8 10.1 10.9 11.7 7.7 10.1 11.1 11.9 1 3.8 7.5 8.3 10.1 10.9 12.0 1 1 19.5 29.5 3 3 4 4 52.5 5 62.0 6 71.5 7.6 9.5 10.5 11.4 1 1 1 6.2 7.3 8.4 10.4 11.4 12.4 1 14.5 1 7.9 9.1 10.1 11.3 12.4 1 1 1 16.8 20.1 2 30.0 3 41.5 4 5 5 6 69.0 75.0 81.0 8 INSTALLED HEIGHT 4" DEEP 6" DEEP 8" DEEP 10" DEEP 1.5 1.9 1.6 2.1 3.6 6.6 7.6 1.8 5.0 6.6 7.6 8.2 9.0 12.5 2 31.0 3 40.0 4 4 2.9 7.7 8.4 9.1 9.7 10.5 2.4 6.2 7.7 8.4 9.1 9.9 10.6 11.4 5.0 5.8 7.5 8.3 9.2 9.9 10.8 11.4 12.4 14.5 2 2 32.5 41.5 4 50.5 55.0 59.5 6 6 5.9 6.8 7.6 8.4 9.2 10.1 10.9 11.7 1 6.4 7.4 8.3 9.2 10.0 11.0 11.9 1 1 9.0 9.9 10.9 11.9 12.9 13.8 1 20.0 30.0 39.5 44.5 49.5 5 5 6 6 7 5.0 7.9 8.9 9.8 10.8 11.6 1 1 1 7.6 8.6 9.7 10.7 11.8 1 1 1 3.6 5.9 8.2 9.4 10.5 11.7 1 13.6 1 1 17.4 20.0 2 29.5 41.0 4 5 5 6 67.5 74.5 80.5 8 tel: 718.33111 fax: 718.338.8529 website: www.ocsind.com 13

Convector Elements COPPER (WITH BRASS HEADERS) DIMENSIONS RATINGS PRICES 8" 6" 4" 1/4 PLUG Depths 4 6 8 Ratings & Prices ELEMENT PART # CE 416 CE 420 CE 424 CE 428 CE 432 CE 436 CE 440 CE 444 CE 448 CE 452 CE 456 CE 460 CE 464 CE 616 CE 620 CE 624 CE 628 CE 632 CE 636 CE 640 CE 644 CE 648 CE 652 CE 656 CE 660 CE 664 CE 816 CE 820 CE 824 CE 828 CE 832 CE 836 CE 840 CE 844 CE 848 CE 852 CE 856 CE 860 CE 864 4" 6" 8" *EDR RATING 12.5 2 31.0 3 40.5 4 4 1 1 22.5 2 31.0 3 40.0 44.5 4 5 57.5 61.5 6 2 32.0 37.5 4 4 5 59.0 6 69.5 7 79.5 APPROX. WEIGHT/LBS. 2 1 4 2 1 2 2 3 4 3 3 1 4 3 1 2 3 3 4 4 4 1 4 4 3 4 5 5 1 4 4 1 2 4 3 4 5 5 1 4 5 1 2 5 1 2 6 6 1 2 6 3 4 7 7 1 4 7 1 2 7 3 4 6 3 4 7 7 1 4 7 1 2 7 3 4 8 8 1 4 8 1 2 8 3 4 9 9 1 4 9 1 2 9 3 4 OCS PRICE $ 160 170 200.00 215.00 230.00 175.00 190 220.00 240.00 220.00 285.00 309.00 320 171.00 171.00 171.00 182.00 190 215.00 240.00 265.00 292.00 30 340 371.00 390 TAPPED 3/4 Element Height...2 Element Depths... 3 3/4, 5-3/4, 7-3/4 Element Lengths: 15-3/4 thru 63-3/4 (end to end) COPPER TUBING SIZE: 1/2 I.D. 5/8 O.D. BRASS HEADERS Dimensions NOMINAL 64 OVERALL 15 3/4 19 3/4 23 3/4 27 3/4 31 3/4 35 3/4 39 3/4 43 3/4 47 3/4 51 3/4 55 3/4 59 3/4 63 3/4 TAPPED 3/4 "C-C" DIMENSIONS 13 1/2 17 1/2 21 1/2 25 1/2 29 1/2 33 1/2 37 1/2 41 1/2 45 1/2 49 1/2 53 1/2 57 1/2 61 1/2 14 tel: 718.33111 fax: 718.338.8529 website: www.ocsind.com

Convector Elements COPPER DIMENSIONS RATINGS Steam Capacities Sq. Ft. EDR 65ºF Entering Air 64 INSTALLED HEIGHT 4" DEEP 6" DEEP 8" DEEP 10" DEEP 7.5 11.5 1 19.5 27.5 30.5 3 3 39.0 41.5 Also available in 1 1 20.5 29.0 3 41.0 45.0 49.0 5 5 61.0 2 30.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 74.5 29.0 34.5 39.0 44.5 50.0 5 61.0 6 72.0 7 82.5 NOMINAL Dimensions 64 INSTALLED HEIGHT 4" DEEP 6" DEEP 8" DEEP 10" DEEP 12.5 2 31.0 3 40.5 4 4 1 1 22.5 2 31.0 3 40.0 44.5 4 5 57.5 61.5 6 SERIES 12 COPPER ELEMENTS Stock sizes 4-6 -10-10 Deep Lengths 16 thru 120 long Various type headers available Per quote only OVERALL 15 1/2 19 1/2 23 1/2 27 1/2 31 1/2 35 1/2 39 1/2 43 1/2 47 1/2 51 1/2 55 1/2 59 1/2 63 1/2 FBS, F, R, RB, S, SB,W 2 32.0 37.5 4 4 5 59.0 6 69.5 7 79.5 10 8 20.0 2 32.0 3 4 50.0 5 62.0 6 7 81.0 8 92.5 "C-C" DIMENSIONS 13 7/8 17 7/8 21 7/8 25 7/8 29 7/8 33 7/8 37 7/8 41 7/8 45 7/8 49 7/8 53 7/8 57 7/8 61 7/8 6 4 180 F FBS, F, R, RB, S, SB, W 180 F 190 F FBS, F, R, RB, S, SB, W 180 F 200 F FBS, F, R, RB, S, SB, W 215 F Steam Capacities Sq. Ft. EDR E.A.T.= 65ºF SF, SFB, SW (Slope Top) INSTALLED HEIGHT INSTALLED HEIGHT 4" DEEP 6" DEEP 8" DEEP 10" DEEP 4" DEEP 6" DEEP 8" DEEP 10" DEEP 64" 64" 64" 64" 1.1 1.6 2.0 2.4 3.6 5.9 1.2 1.8 6.2 1.3 2.0 2.5 2.9 5.3 5.8 6.8 7.2 10.0 1 1 20.0 2 2 29.5 3 3 39.0 42.5 4 49.0 1.8 2.4 2.9 5.8 6.4 7.5 8.7 2.1 5.8 7.8 8.4 9.1 9.7 2.9 3.6 5.0 5.8 7.2 8.7 10.1 10.8 1 20.0 29.5 34.5 39.5 4 49.0 5 5 6 6 7 3.6 5.0 6.4 7.8 9.2 9.9 10.6 2.5 7.9 8.7 9.5 10.2 11.1 11.8 4.5 5.3 7.9 8.8 9.7 10.6 11.5 12.4 1 19.5 2 32.0 3 44.5 51.0 5 6 69.5 7 82.0 8 94.5 Series 12 Element Lengths 2" Tapped: 1/2" Tapped: 3/4" 7.8 8.6 9.4 10.2 10.9 11.6 6.2 8.8 9.7 10.6 11.4 1 1 7.9 8.9 9.8 10.8 11.8 1 13.6 1 31.5 39.0 4 5 61.0 69.5 7 84.5 9 10 109.5 114.5 64" Center-to Center 1.2 1.8 3.6 6.6 1.4 2.0 2.5 5.9 6.4 7.4 1.5 7.7 8.2 10.5 1 17.5 27.5 31.0 34.5 3 41.0 45.0 4 52.0 NOTE: CUSTOMIZED S UP TO 1 LONG ARE AVAILABLE ELEMENTS MAY BE SQUEEZED TO REDUCE THE DEPTH SIZE 2.0 3.8 5.0 7.5 8.2 8.7 9.4 7.7 8.4 9.1 9.8 10.4 2.5 6.2 7.8 9.4 10.0 10.9 11.6 1 21.5 2 31.5 42.0 47.5 52.5 57.5 62.5 6 7 7 2.4 3.8 4.5 7.6 8.4 9.0 9.9 10.4 11.3 6.8 7.6 10.2 11.0 11.8 1 6.6 7.5 9.4 10.3 11.3 1 1 1 27.5 3 41.0 47.5 5 61.0 67.5 7 81.0 87.5 94.5 101.0 4.5 6.2 7.9 8.7 9.7 10.4 11.4 1 1 8.9 9.9 10.9 11.8 12.9 13.8 1 7.8 8.9 9.9 11.0 12.1 1 1 15.3 16.4 2 3 41.5 50.0 5 6 74.5 82.5 90.5 9 10 114.5 1 1/2" shorter then nominal Tapped: 1/2" Tapped: 3/4" tel: 718.33111 fax: 718.338.8529 website: www.ocsind.com 15

POLICY AND TERMS Invoices dated from the 1st to the 25th of the month inclusive will be subject to a cash discount of 2% if paid on or before the 10th of the month following and will be due the next succeeding day. Invoices dated the 26th to the end of the month will be considered dated the 1st of the following month and will qualify for a case discount as outlined above. The cash discount is to be computed on the product total amount of the invoice before any additions or deductions for transportation or any sales or manufacturer s taxes are applied. All materials pertaining to the price list are FOB our Plant. No merchandise can be returned for credit without prior approval, and may be subject to a 25% handling charge. W A R R A N T Y We warrant all OCS equipment in this catalog to be free from defects in material and workmanship under normal use and service. After installation, all products must be fairly tested by the plumber; our obligation under this warranty being limited to repairing or replacing at our factory any part or parts thereof which shall within one year from day of shipment from our factory be returned to our factory with transportation charges prepaid, and which our examination shall disclose to have been defective; this warranty being expressly in lieu of all other warranties expressed or implied and of all other obligations or liabilities on our part, and we neither assume nor authorize any person to assume for us any other liability in connection with the sale of OCS products. BRASS VALVES Part No. Description BVCV1 1 Convector Valve BVCV114 1-1/4 Convector Valve BVRV34 3/4 Radiator Valve BVRV1 1 Radiator Valve BVRV114 1-1/4 Radiator Valve BVSGV1 1 Steam Gate Valve BVSGV114 1-1/2 Steam Gate Valve BVNYCT NYC Trap 2 x 1-1/2 Ball Valves (IPS & Copper) in all sizes This warranty does not cover reimbursement to purchaser or user for any labor charges for replacement of parts, adjustments, repairs, disconnecting or reinstallation or any other work done on the job. We assume no responsibility for consequential damages of any kind, and the purchaser or user by acceptance of this equipment assumes the responsibility for the consequences of its use or misuse. This warranty does not apply to any equipment which shall have been repaired or altered outside of our factory in any way so as, in our judgment, to affect its stability, nor which has been subject to misuse, negligence or operation conditions in excess of those stated in this catalog. The right is reserved by OCS Industries to change specification or prices without incurring any responsibility for previously sold equipment. OCS Industries E-Mail: orders@ocsind.com info@ocsind.com ocsind@optonline.net Phone: 718.33111 l Fax: 718.338.8529 www.ocsind.com