Switchboard Solutions

Switchboard Solutions Switches Enclosures Industrial Control LED Lighting Connectors Cable Audio-Visual Alarms Military Standard Transport Cases

Switches Plus Components Switches Plus Components, a family owned entity, has been in business for over 40 years, providing great service and high quality products to customers engaged in the electrical and electronics industry. Conveniently located in Braeside Victoria, we fill the role of being a one stop shop in a number of product categories; Switches, Enclosures, Industrial Control, LED Lighting, Connectors, Audio-Visual alarms, and Military Standard Transport Cases. We also provide some niche solutions with a range of LCD displays, step motors and controllers, along with IP65 rated keyboards for infection control and industrial applications. In response to many customer requests, we are also developing a new product sourcing service to help customers find the right products, using our extensive network of suppliers, providing significant savings in your time and money and importantly, allowing you to focus on what you do best. Our staff are technically trained, and have years of hands on experience. We understand and can relate to your specific challenges and requirements, and our ingrained knowledge will benefit you and immediately put you at ease. Our business principal is to always give value and make your purchases with us, easy and effortless. We always go the extra mile, providing you with the right advice and prompt delivery, in full, and on time. Our product portfolio is extensive, we hold a wide range of inventory, so more often than not we have the right product here, when you need it. We maintain an ISO9001 quality management system, and are constantly on the lookout for new products, ideas and better ways to communicate with and serve you. Make the switch today, and find out why so many customers have turned on to Switches Plus. We distribute the highest quality products from some of the leading manufacturers in their respective fields. Over 90% of our product range is manufactured in Germany, Italy, Spain, England, USA, Japan, Austria or France, and you can rest assured that we only source products from the best and most trusted manufacturers in the world. We have also partnered with one of the world s largest electronic/electrical buying houses, giving you access to millions of products from over 2500 world leading suppliers, making us a true one stop shop for all your product sourcing requirements. 2

Contents Alarms 46 30/45/65mm Ø Panel Mount Alarm 47 M28 Audiolarm II 46 M28 Turbo alarm 46 M28 Twin Turbo Alarm with indicator 47 Beacons and alarms 44 22mm Anti-vandal Pilot lights 44 45mm Ø Panel Mount LED Beacon and Alarm 44 65mm Ø Panel Mount LED Beacon 44 65mm Ø Panel Mount LED Beacon and Alarm 44 65mm Ø Xenon Strobe Beacon 45 93mm Ø LED Flashing Beacon and Siren 45 94-132mm Ø Q Series LED Beacon and Alarm 45 Cable 10 V90HT Building wire 10 Cable Glands 9 Brass Cable Gland 9 Brass Thread Enlarger 9 EMC Brass Cable Gland 9 Nylon Cable Gland 9 Contactors & Relays 32 Installation Contactors 32 Interface Relays 32 Relays 34 Solid State Relays 32 DIN Terminals 26 Din Rail and Accessories 31 Earth terminals 29 Fused and Disconnect terminals 30 Multi-tier feed through terminals 29 Single tier feed through terminals 28 Terminal Markers 31 Terminal Strips 31 Industrial Control 14 16mm Audio Alarm 15 16mm Round LED Pilot Light 14 16mm Round Pushbuttons 14 16mm Selector Switches 14 16mm Selector Switches 15 16mm Square LED Pilot Light 15 16mm Square Pushbuttons 15 22mm Accessories 17 22mm Double pushbutton 16 22mm Emergency Stop 18 22mm LED Pilot lights 17 22mm Mushroom 16 22mm Pushbuttons 16 22mm Selector Switches 17 125A Modular Main Switch 21 Cam Switches 20 Main Switches 21 Palm switch 18 Switches & Isolators 21 Industrial Multipole Connectors 12 Double Locking Lever 13 High Power Inserts 12 Mini Connectors 12 Single Locking Lever 13 Lighting Control 41 Emergency Light Test Relay 41 Premium LED Light Towers 43 Wall mounted Twilight Switches 41 Power Supplies & Transformers 22 Bell Transformers 22 Power Supplies 22 Quick Connects 11 Butt Splice 11 Forked Spade Terminals 11 Quick Connects 11 Ring Terminals 11 Steel Industrial Enclosures IP66 6 Powder coated Steel Enclosures 6 Stainless Steel Enclosures 7 Temperature control 8 Filters and fans 8 Thermostats 8 Ventilators 8 Timers 37 Multifunction Timer 37 Single function Timers 38 Time Switches 39 7 Day Digital 40 24 Hour Analogue 39 24 Hour Analogue with battery backup 39 Day/Week Digital 40 3

Switches Our portfolio of Switching technology is extremely broad, we carry stock of many items within the categories of; Anti-vandal Switches Automotive Switches Cam Switches DIP Switches Emergency Stop Switches Float and Flow Switches Foot Switches Isolators Industrial Control Joysticks Key Switches Keypad Switches Limit Switches Load Break Switches Micro Switches Push Button Switches Pressure Switches Pendant Switches Ribbon Switches Rocker Switches Rotary Switches Safety Switches Selector Switches Slide Switches Switch locks Switched Combination Outlets Tact Switches Thermal Switches Toggle Switches Twilight Switches Connectors To interconnect your equipment we supply a well-rounded list of electrical and electronic solutions; 400A high current single pole Connectors Weatherproof Industrial Plugs and Sockets Industrial Multi-pole Connectors Industrial Circular Connectors Mil-Spec Connectors IP68 Rated Connectors XLR Connectors CEEform IEC Connectors Contained within this catalogue is a small selection of commonly used products we supply the Switchboard and OEM market. Many more products are available within our range. If you can t find the product you are looking for within this catalogue, please contact us and we will be more than happy to help. Switchgear The highest quality products are available from European manufacturers, Schrack and Conta-Clip. Time and Monitoring Relays Time Clocks Control and Signalling Devices Relays Contactors, Motor Control and Thermal Overloads Power supplies & Transformers Din Rail Mounted Modular Components Specialty Products We also provide some niche solutions with a range of LCD displays, step motors and controllers, along with IP65 rated keyboards for infection control and industrial applications. Cable To safely connect your equipment and installations we offer a vast range of wire and cables; Building Wires Orange Circular Cables Rubber Cables Industrial Control Cablesl Cable accessories A large range of accessories; Cable Glands Ferrules Quick Connects Industrial Conduits Drag Chain

Beacons, Indicators & Alarms To protect the wellbeing of people and to monitor equipment and industrial processes we carry a comprehensive stock of Audio & LED Visual Alarms and Indicators; Alarms for Automotive applications Panel Mounted Alarm Sounders and Visual Indicators Wall mounted Alarm Sounders and Visual Indicators Tower Lights and Alarm Sounders Enclosures We carry an extensive range of enclosures in various formats, sizes and materials for applications from hand held to large format wall mounted enclosures. The material types we stock include; ABS, Polyester, & Polycarbonate Aluminium Fibreglass Steel UV Powder Coated Stainless Steel Fibre Optics Conceived from a desire for a better quality range of data products, Switches Plus Components new Dataflow range was developed to meet the stringent requirements and technical expectations of the Australian market. Fibre cable FOBOTs Patch Leads Connectors Transport Cases Switches Plus are the Australian distributor for SKB impact resistant Industrial Cases. SKB cases are manufactured to meet or exceed military standards. We stock a comprehensive range of products; Mil Standard carry cases 19 Rack Cases 19 Shock Rack Cases Test & Measure High quality test leads and accessories are essential for worker safety and reliable measurements. We supply a large range of accessories, all made in Europe to the highest standard; Banana plugs and sockets Test leads Test probes and clips Scope leads LED Lighting Switches Plus carries a comprehensive range of LED lighting products, suitable for residential, commercial and industrial applications. Downlights LED Panels High bays, spotlights, and floodlights Outdoor lighting

Steel Industrial Enclosures IP66 Powder coated Steel Enclosures Our Industrial grade enclosures come with a minimum protection rating of IP66 (Dust tight and protected against powerful water jets). The mounting plate is a generous 2mm thick to carry the heaviest of loads. Our Steel enclosures are UV resistant powder coated, ensuring they will last and continue to look good. Subject to minimum order requirements and lead times we can modify and custom build enclosures to your specifications. Specifications: IP66 Industrial Duty Fitted with Gland Plate for convenient and fast cable entry UV Resistant Powder Coat Finish RAL 7035 (grey) RAL 2000 (orange) Dimensions (H x W x D) (mm) Wall Metal Thickness (mm) Door Metal Thickness (mm) FT202015 200 x 200 x 150 1.2 1.5 4 FT302015 300 x 200 x 150 1.2 1.5 5 FT303020 FT303020-X15 300 x 300 x 200 1.2 1.5 7 FT403020 400 x 300 x 200 1.2 1.5 8.5 FT404020 FT404020-X15 400 x 400 x 200 1.2 1.5 10.5 FT503020 500 x 300 x 200 1.2 1.5 11.5 FT504020 500 x 400 x 200 1.2 1.5 12 FT504025 500 x 400 x 250 1.2 1.5 12.6 FT505020 FT505020-X15 500 x 500 x 200 1.2 1.5 14.5 FT505025 500 x 500 x 250 1.2 1.5 14.9 FT604020 600 x 400 x 200 1.2 1.5 14 FT604030 600 x 400 x 300 1.2 1.5 18 FT605025 600 x 500 x 250 1.2 1.5 18 FT606020 600 x 600 x 200 1.2 1.5 21 FT606025 FT606025-X15 600 x 600 x 250 1.2 1.5 21 FT606030 600 x 600 x 300 1.2 1.5 21 FT705025 700 x 500 x 250 1.2 1.5 20.5 FT806030 FT806030-X15 800 x 600 x 300 1.2 1.8 27.5 FT808030 800 x 800 x 300 1.2 1.8 34 FT1006030 1000 x 600 x 300 1.5 1.8 37.3 FT1008030 FT1008030-X15 1000 x 800 x 300 1.5 1.8 46.7 FT1208030 1200 x 800 x 300 1.5 1.8 48.5 Weight (kg) 6

Steel Industrial Enclosures IP66 Stainless Steel Enclosures These enclosures are manufactured with 1.2mm thick 304 grade stainless steel, with 1.5mm thick doors for extra rigidity. The mounting plate is a generous 2mm thick to carry the heaviest of loads. Interior and mounting plates are painted white to reduce glare inside enclosure. With ingress protection rating of IP66, and the heavy duty stainless steel construction, these enclosures are sure to perform and impress. Specifications: IP66 Industrial Duty Fitted with 2mm Mounting Plate Interior and Mounting Plates powder coated white to reduce glare when fitting out or conducting maintenance Dimensions (H x W x D) (mm) Wall Metal Thickness (mm) Door Metal Thickness (mm) FTSS202015 200 x 200 x 150 1.2 1.5 5 FTSS302015 300 x 200 x 150 1.2 1.5 6 FTSS302515 300 x 250 x 150 1.2 1.5 6.5 FTSS303015 300 x 300 x 150 1.2 1.5 7 FTSS303020 300 x 300 x 200 1.2 1.5 5.8 FTSS403020 400 x 300 x 200 1.2 1.5 9 FTSS404020 400 x 400 x 200 1.2 1.5 9.5 FTSS503020 500 x 300 x 200 1.2 1.5 10 FTSS504020 500 x 400 x 200 1.2 1.5 11.5 FTSS504025 500 x 400 x 250 1.2 1.5 12 FTSS604020 600 x 400 x 200 1.2 1.5 13 FTSS605025 600 x 500 x 250 1.2 1.5 18.5 FTSS606020 600 x 600 x 200 1.2 1.5 18.2 FTSS606025 600 x 600 x 250 1.2 1.5 19.3 FTSS606030 600 X 600 X 300 1.2 1.5 20.4 FTSS705025 700 x 500 x 250 1.2 1.5 21 FTSS806030 800 x 600 x 300 1.2 1.8 34 FTSS1008030 1000 x 800 x 300 1.5 1.8 46.7 Weight (kg) Our range of enclosures include those made from plastics such as ABS, Polycarbonate and Polyester. We also offer Fibreglass, Aluminium and die-cast Aluminium. More information is available within our Enclosures catalogue. 7

Temperature control Filters and fans Side or door mounting For the ventilation of control cabinets, enclosures and housings Grey - RAL7035 Filter mats for dust collection FK55 series offers low shape and quick mounting, with a distinct curved modern styling. IP54 as standard, optional rain cover required to reach IP55 230V AC Filter and fan Exit filter Cutout dimensions (W x H) External dimensions (W x H) Air Flow no Filter m³/hr Air Flow with Filter m³/hr FK5521.230 FK5521.300 92x92 109x109 35 24/27 FK5522.230 FK5522.300 125x125 150x150 67 50/58 FK5523.230 FK5523.300 177x177 204x204 105 85/100 FK5525.230 FK5525.300 223x223 250x250 230 170/230 FK5526.230 FK5526.300 291x291 325x325 550 360/490 FK5527.230 FK5527.300 291x291 325x325 650 500/600 Thermostats Suitable for heating and cooling applications Sensor Element: Bi-metal Adjustment Range: 0-60 C Contact Rating: 6A 250V AC Dimensions: 60H x 33W x 35D (mm) Connections: 2 pole screw terminal 2.5mm² KTO 011 KTS 011 Description Heating Control (red) Cooling Control (blue) Ventilators DS-VH-40 DS-VH-50 DS-VH-60 Description Ventilator for 40mm hole Ventilator for 50mm hole Ventilator for 60mm hole 8

Cable Glands Nylon Cable Gland (Supplied with Locknut) Thread Thread Length (mm) Cable Clamping Range (mm) Pack Qty HSK-M12B-L M12 10 3-6.5 100 HSK-M16B-DL M16 10 5-10 100 HSK-M20B-DL M20 10 8-14 100 HSK-M25B-L M25 12 13-18 50 HSK-M32B-L M32 12 18-25 25 HSK-M40B M40 15 22-30 25 HSK-M50B M50 15 30-38 10 EMC Brass Cable Gland (Locknut to be ordered seperately) Thread Thread Length (mm) Cable Clamping Range (mm) Pack Qty (EMC Brass Locknuts) Pack Qty HSM-EMVSC-M16L M16 10 4-8 50 GME-M16 50 HSM-EMVSC-M20L M20 10 7-12 50 GME-M20 50 HSM-EMVSC-M25L M25 12 11-16 25 GME-M25 25 HSM-EMVSC-M32L M32 12 15-21 20 GME-M32 25 HSM-EMVSC-M40L M40 15 21-30 10 GME-M40 25 HSM-EMVSC-M50L M50 15 30-38 10 GME-M50 20 HSM-EMVSC-M63L M63 15 38-53 5 GME-M63 20 Brass Cable Gland (Locknut to be ordered seperately) Thread Thread Length (mm) Cable Clamping Range (mm) Pack Qty (Brass Locknuts) HSM-M12-L M12 10 3-6.5 50 GM-M12 50 HSM-M16-DL M16 10 5-10 50 GM-M16 50 HSM-M20-DL M20 10 8-14 50 GM-M20 50 HSM-M25-DL M25 12 13-18 25 GM-M25 25 HSM-M32-DL M32 12 18-25 20 GM-M32 20 HSM-M40-L M40 15 22-30 10 GM-M40 20 HSM-M50-L M50 15 30-38 10 GM-M50 20 HSM-M63-L M63 15 37-44 5 GM-M63 20 Pack Qty Brass Thread Enlarger Thread Conversion Pack Qty EWM-M16/M20 M16 to M20 50 EWM-M20/M25 M20 to M25 50 EWM-M25/M32 M25 to M32 25 EWM-M32/M40 M32 to M40 25 EWM-M40/M50 M40 to M50 20 9

Cable V90HT Building wire 105 C Flexible building wire Class 5 flexible tinned copper conductors insulated with heat resistant, flame retardant PVC (V90HT) insulation. Supplied in 100mtr rolls Nominal Voltage: 600/1000V Temperature Range: Fixed: -20 C to +105 C 5-20 105 3xØ 0.6/1kV Class 5 Flexible Minimum Temperature Maximum Temperature Minimum Bending Radius Flame Retardant Nominal Voltage Conductor size (mm²) Red Black White Blue Green/Yellow 0.5 FLB1x0.5RD FLB1x0.5BK FLB1x0.5WE FLB1x0.5BE FLB1x0.5GNYW 0.75 FLB1x0.75RD FLB1x0.75BK FLB1x0.75WE FLB1x0.75BE FLB1x0.75GNYW 1 FLB1x1RD FLB1x1BK FLB1x1WE FLB1x1BE FLB1x1GNYW 1.5 FLB1x1.5RD FLB1x1.5BK FLB1x1.5WE FLB1x1.5BE FLB1x1.5GNYW 2.5 FLB1x2.5RD FLB1x2.5BK FLB1x2.5WE FLB1x2.5BE FLB1x2.5GNYW 4 FLB1x4RD FLB1x4BK FLB1x4WE FLB1x4BE FLB1x4GNYW 6 FLB1x6RD FLB1x6BK FLB1x6WE FLB1x6BE FLB1x6GNYW 10 FLB1x10RD FLB1x10BK FLB1x10WE FLB1x10BE FLB1x10GNYW Conductor size (mm²) Brown Grey Orange Violet Pink 0.5 FLB1x0.5BN FLB1x0.5GY FLB1x0.5OE FLB1x0.5VT FLB1x0.5PK 0.75 FLB1x0.75BN FLB1x0.75GY FLB1x0.75OE FLB1x0.75VT FLB1x0.75PK 1 FLB1x1BN FLB1x1GY FLB1x1OE FLB1x1VT FLB1x1PK 1.5 FLB1x1.5BN FLB1x1.5GY FLB1x1.5OE FLB1x1.5VT FLB1x1.5PK 2.5 FLB1x2.5BN FLB1x2.5GY FLB1x2.5OE FLB1x2.5VT FLB1x2.5PK Part Number Conductor size (mm²) Colour Pack size (pcs) Conductor size (mm²) Colour Pack size (pcs) Part Number Conductor size (mm²) Colour Pack size (pcs) A00552GB 0.5 White 100 A00752GB 0.75 Light Blue 100 A01052GB 1 Red 100 A01552GB 1.5 Black 100 A02552 2.5 Grey 100 A04052 4 Orange 100 A06052 6 Green 100 A10052 10 Brown 100 A16052 16 White 50 A00552TWIN 2 x 0.5 White 100 A00752TWIN 2 x 0.75 Light Blue 100 A01052TWIN 2 x 1 Red 100 A01552TWIN 2 x 1.5 Black 100 A02552TWIN 2 x 2.5 Grey 100 A04052TWIN 2 x 4 Orange 100 A06052TWIN 2 x 6 Green 100 A10052TWIN 2 x 10 Brown 100 A16052TWIN 2 x 16 White 100 A00552K 0.5 White 1000 A00752K 0.75 Light Blue 1000 A01052K 1 Red 1000 A01552K 1.5 Black 1000 A02552K 2.5 Grey 500 10

Quick Connects Ring Terminals Insulated Pack size 100 pieces Forked Spade Terminals Insulated Pack size 100 pieces Conductor size (mm²) 0.25-1.65 1.04-2.63 2.63-6.64 0.25-1.65 1.04-2.63 2.63-6.64 Stud size (mm) Red Blue Yellow Red Blue Yellow 4 RL1-4 RL2-4 SL1-4 SL2-4 SL5-4 5 RL1-5 RL2-5 SL1-5 SL2-5 SL5-5 6 RL1-6 RL2-6 RL5-6 SL5-6 8 RL2-8 RL5-8 10 RL5-10 Quick Connects Insulated Pack size 100 pieces Conductor size (mm²) 0.25-1.65 1.04-2.63 2.63-6.64 0.25-1.65 1.04-2.63 2.63-6.64 Colour Red Blue Yellow Red Blue Yellow Tab thickness (mm) 0.5 0.8 0.8 0.8 0.8 0.8 Tab Width (mm) 6.4 QFF1-6CS QFF2-6CS QFF5-6CS QM1-6CS QM2-6CS QM5-6CS Butt Splice Insulated Pack size 100 pieces Conductor size (mm²) 0.25-1.65 1.04-2.63 2.63-6.64 0.25-1.65 1.04-2.63 2.63-6.64 Colour Red Blue Yellow Red Blue Yellow Tab thickness (mm) 0.5 0.8 0.5 0.8 0.8 Tab Width (mm) 2.8 QF1-3/5CS QF2-3/5CS BSI1 BSI2 BSI5 6.4 QF1-6CS QF2-6CS QF5-6CS 11

Industrial Multipole Connectors Industrial Multipole connectors are specially designed for rigorous environments and suitable for numerous applications including industrial automation, equipment manufacturing, industrial system connection, stage and theatre lighting, as well as information and control technology. WAIN Electrical is dedicated to providing high-quality products for industrial connection systems. Gland size M20 M25 M32 M40 Cable clamping range 8-14 mm cable O.D. 9-16 mm cable O.D. 15-22 mm cable O.D. 22-32 mm cable O.D. Mini Connectors 230/400V, 10A, IP65 Shown here are the Narrow Entry Hood paired with the Open Entry Base. These connectors offer IP65 Protection. Socket Insert Plug Insert Open Entry Base Open Entry Angle Base Bulkhead Base Description Part No Part No Part No Part No Gland Part No Gland 3 Pole + Earth HA-003-F HA-003-M H3A-BK-1L/W H3A-BK-1L/W-SE M20 3P-BBH-20 M20 4 Pole + Earth HA004-F HA-004-M H3A-BK-1L/W H3A-BK-1L/W-SE M20 3P-BBH-20 M20 Socket Insert Plug Insert Narrow Entry Hood Top Entry Hood Coupling Hood Description Part No Part No Part No Gland Part No Gland Part No Gland 3 Pole + Earth HA-003-F HA-003-M 3P-HNE-20 M20 3P-HTE-20 M20 3P-HTEC-20 M20 4 Pole + Earth HA004-F HA-004-M 3P-HNE-20 M20 3P-HTE-20 M20 3P-HTEC-20 M20 High Power Inserts Fit inside standard housings, for current ratings greater than 80A Voltage 400/690 V Voltage 690V Voltage 690V/400V Current 35A Current 80A Current 80A/16A No. of Pins 6 Pole + Earth No. of Pins 4 Pole + Earth No. of Pins 4 x 80A + 2 x 16A Hood/Base Size 16 Pole Hood/Base Size 16 Pole Hood/Base Size 16 Pole Description Part No Description Part No Description Part No Socket Insert HSB-006-F Socket Insert HK-004/0-F Socket Insert HK-004/2-F Plug Insert HSB-006-M Plug Insert HK-004/0-M Plug Insert HK-004/2-M 12

Industrial Multipole Connectors Double Locking Lever 500V, 16A, IP65 Built for the harshest environments and toughest applications Bottom-line benefits for modular product builds and installations Socket Insert Plug Insert Double Entry Base Narrow Entry Hood Top Entry Hood Coupling Hood Description Part No Part No Part No Gland Part No Gland Part No Gland Part No Gland 10 Pole + Earth HE-010-F HE-010-M 10P-BDE-20 M20 10P-HNE-20 M20 10P-HTE-20 M20 10P-HTEC-20 M20 10 Pole + Earth HE-010-F HE-010-M 10P-BDE-25 M25 10P-HNE-25 M25 10P-HTE-25 M25 10P-HTEC-25 M25 16 Pole + Earth HE-016-F HE-016-M 16P-BDE-25 M25 16P-HNE-25 M25 16P-HTE-25 M25 16P-HTEC-25 M25 24 Pole + Earth HE-024-F HE-024-M 24P-BDE-25 M25 24P-HNE-25 M25 24P-HTE-25 M25 24P-HTEC-25 M25 32 Pole + Earth HE-032-F HE-032-M 32P-HNE-32 M32 32P-HTE-32 M32 32P-HTEC-32 M32 Open Entry Base Open Entry Base with Lid Double Entry Base with Lid Narrow Entry Hood with Locking Levers Top Entry Hood with Locking Levers Description Part No Part No Gland Part No Gland Part No Gland Part No Gland 10 Pole + Earth H10B-BK-2L/PSR H10B-BK-4B-CV M20 10P-BDEL-20 2 M20 H10B-SE-2L/PSR M20 H10B-TE-2L/PSR M20 16 Pole + Earth H16B-BK-2L/PSR H16B-BK-4B-CV M25 16P-BDEL-25 2 M25 H16B-SE-2L/PSR M25 H16B-TE-2L/PSR M25 24 Pole + Earth H24B-BK-2L/PSR H24B-BK-4B-CV M25 24P-BDEL-25 2 M25 H24B-SE-2L/PSR M25 H24B-TE-2L/PSR M25 32 Pole + Earth H32B-BK-2L/S Single Locking Lever 500V, 16A, IP65 Socket Insert Plug Insert Open Entry Base Narrow Entry Hood Top Entry Hood Coupling Hood Description Part No Part No Part No Part No Gland Part No Gland Part No Gland 6 Pole + Earth HE-006-F HE-006-M H6B-BK-1L/PSR 6P-HNE-20 M20 6P-HTE-20 M20 6P-HTEC-20 M20 48 Pole + Earth HE-048-F HE-048-M H48B-BK-1L/S 48P-HNE-32 M32 48P-HTE-32 M32 48P-HTEC-32 M32 48 Pole + Earth HE-048-F HE-048-M H48BK-1L/S 48P-HNE-40 M40 48P-HTE-40 M40 48P-HTEC-40 M40 Socket Insert Plug Insert Open Entry Base with Lid Double Entry Base Double Entry Base with Lid Coding Pins Description Part No Part No Part No Part No Gland Part No Gland Part No 6 Pole + Earth HE-006-F HE-006-M H6B-BK-1L/PSR-CV 6P-BDE-20 M20 6P-BDEL-20 2 M20 M3/N 48 Pole + Earth HE-048-F HE-048-M H48B-BK-1L/S-CV 48 Pole + Earth HE-048-F HE-048-M H48-BK-1L/S-CV 13

Industrial Control 16mm Round Pushbuttons IP65 - Double Pole, Double Throw Industrial Quality IP65 Control Components. Impressive looking, compact design. Electrical Rating: 250V AC 2A Life Expectancy: Pushbuttons Selector & Keyswitches Pilot Lights > 1,000,000 operations > 600,000 operations > 20,000 Hours Specifications: 18mmØ Bezel Detachable Actuator IP65, 250V, 2A 2.8mm Quick Connect/Solder Function Illuminated Red Green Blue White Yellow Momentary No M6P-AMS2-R M6P-AMS2-G M6P-AMS2-B M6P-AMS2-W M6P-AMS2-Y Momentary Yes - 12V DC M6P-AMS2-12ER M6P-AMS2-12EG M6P-AMS2-12EB M6P-AMS2-12EW M6P-AMS2-12EY Momentary Yes - 24V DC M6P-AMS2-24ER M6P-AMS2-24EG M6P-AMS2-24EB M6P-AMS2-24EW M6P-AMS2-24EY Maintained No M6P-AAS2-R M6P-AAS2-G M6P-AAS2-B M6P-AAS2-W M6P-AAS2-Y Maintained Yes - 12V DC M6P-AAS2-12ER M6P-AAS2-12EG M6P-AAS2-12EB M6P-AAS2-12EW M6P-AAS2-12EY Maintained Yes - 24V DC M6P-AAS2-24ER M6P-AAS2-24EG M6P-AAS2-24EB M6P-AAS2-24EW M6P-AAS2-24EY 16mm Round LED Pilot Light IP65-2.8mm Quick Connect/Solder Voltage Red Green Blue White Yellow 12V DC M6L-AS-12ER M6L-AS-12EG M6L-AS-12EB M6L-AS-12EW M6L-AS-24EY 24V DC M6L-AS-24ER M6L-AS-24EG M6L-AS-24EB M6L-AS-24EW M6L-AS-24EY 16mm Selector Switches IP65 - Double Pole, Double Throw Position Maintained Momentary Maintained Maintained (key trap) Momentary 2 2 (Spring Return from Right) 3 (Centre Off) 3 (2 Way Spring Return/Centre Off) 3 (Spring Return from left/centre Off/ Maintained Right) 0 1 0 1 1 0 2 1 0 2 1 0 2 M6S-A20S2 M6K-A20S2-A M6K-A20S2-B M6S-A30S2 M6S-A31S2 M6S-A22S2 M6S-A33S2 M6K-A30S2-A M6K-A22S2-A M6K-A33S2-A 14

Industrial Control 16mm Square Pushbuttons IP65 - Double Pole, Double Throw Function Illuminated Red Green Blue White Yellow Momentary No M6P-BMS2-R M6P-BMS2-G M6P-BMS2-B M6P-BMS2-W M6P-BMS2-Y Momentary Yes - 12V DC M6P-BMS2-12ER M6P-BMS2-12EG M6P-BMS2-12EB M6P-BMS2-12EW M6P-BMS2-12EY Momentary Yes - 24V DC M6P-BMS2-24ER M6P-BMS2-24EG M6P-BMS2-24EB M6P-BMS2-24EW M6P-BMS2-24EY Maintained No M6P-BAS2-R M6P-BAS2-G M6P-BAS2-B M6P-BAS2-W M6P-BAS2-Y Maintained Yes - 12V DC M6P-BAS2-12ER M6P-BAS2-12EG M6P-BAS2-12EB M6P-BAS2-12EW M6P-BAS2-12EY Maintained Yes - 24V DC M6P-BAS2-24ER M6P-BAS2-24EG M6P-BAS2-24EB M6P-BAS2-24EW M6P-BAS2-24EY 16mm Square LED Pilot Light IP65-2.8mm Quick Connect/Solder Voltage Red Green Blue White Yellow 12V DC M6L-BS-12ER M6L-BS-12EG M6L-BS-12EB M6L-BS-12EW M6L-BS-24EY 24V DC M6L-BS-24ER M6L-BS-24EG M6L-BS-24EB M6L-BS-24EW M6L-BS-24EY 16mm Selector Switches IP65 - Double Pole, Double Throw 16mm Audio Alarm IP65-80dB Position Maintained Momentary Maintained 2 2 (Spring Return from Right) 3 (Centre Off) 3 (2 Way Spring Return/Centre Off) 3 (Spring Return from left/centre Off/ Maintained Right) 0 1 0 1 1 0 2 1 0 2 1 0 2 M6S-B20S2 M6S-B30S2 M6S-B31S2 M6S-B22S2 M6S-B33S2 M6K-B20S2-A M6K-B30S2-A M6Z-24S Specification Switchable between Slow, Steady, & Quick 12/24V AC/DC 15

Industrial Control The new M22 series of Industrial Pilot devices combine modern European styling with an attractive slim design and long life. The rugged design of the IP65 pushbutton operators and contact blocks provide reliable mechanical operation exceeding five million switching cycles. The illuminated versions have a LED light source that will operate between 12-30V AC/DC, with optional 230V LED modules also available, providing 100,000 hours of illumination. Contact blocks are capable of switching 6A at 230V AC and 3A at 24V DC making them a very versatile switch. Keyed switch operators, Emergency stops, and illuminated selector switches complete the product offering. Rated operational current 230V 400V AC-15 500V 24V 42V 60V DC-13 110V 220V 6 A 4 A 2A 3 A 1.7 A 1.2 A 0.8 A 0.3 A Contact elements Momentary Pushbuttons Maintained Pushbuttons Double pushbutton actuators Selector switch actuators Key operated actuators Emergency stop actuators Standards/Approvals IEC/EN 60947 UL-508 VDE 0660 CE UL CSA TUV Lifespan, mechanical Operations > 5,000,000 > 5,000,000 > 1,000,000 > 200,000 > 100,000 >100,000 > 100,000 Operating frequency Operations/h < 3600 < 3600 < 1800 < 3600 < 2000 < 100 < 600 Acutating force g < 510g < 510g < 510 g < 510g -- -- < 5100 g Ambient temperature -25/70 C -25/70 C -25/70 C -25/70 C -25/70 C -25/70 C -25/70 C Terminal capacity Rated impulse withstand voltage Rated insulation voltage 0.5-2.5 mm² 6000 VAC 500 V Contacts supplied 1 NO + 1 NC 1 NO + 1 NC 1 NO + 1 NC 2 NO 2 NO see table 22mm Pushbuttons IP65 Function LED Green Red White Yellow /Amber Blue Black Latching Momentary 12-30V M22FP-ASF11E30G M22FP-ASF11E30R M22FP-ASF11E30W M22FP-ASF11E30Y M22FP-ASF11E30BL AC/DC M22FP-MSF11E30G M22FP-MSF11E30R M22FP-MSF11E30W M22FP-MSF11E30Y M22FP-MSF11E30BL No M22FP-MSF11G M22FP-MSF11R M22FP-MSF11W M22FP-MSF11Y M22FP-MSF11BL M22FP-MSF11BKO 230V AC LED Module M22-SF-E230G M22-SF-E230R M22-SF-E230W M22-SF-E230Y M22-SF-E230BL 22mm Mushroom IP65 22mm Double pushbutton IP65 Contacts Function Red 36mm Ø Green 36mm Ø Contacts Function Double Switch block 1 NO + 1 NC Momentary M22MP-MSF11RO M22MP-MSF11GO 1 NO + 1 NC Momentary M22DP-SF11E30GR 16

Industrial Control 22mm Selector Switches IP65 Supplied with 2 Normally Open Contact Blocks Position Maintained Momentary Maintained (no key traps) 2 0 1 3 (Off Centre) 1 0 2 2 (Spring Return from Right) 3 Spring Return from Left & Right) 0 1 1 0 2 M22S-T20SF20WO M22S-T30SF20WO M22S-T22SF20WO M22S-T32SF20WO M22K-20SF20B M22K-30SF20B 2 position with 12-30V AC/DC LED Illumination Green 0 1 M22S-T20SF20E30G Red M22S-T20SF20E30R 22mm Accessories IP65 Description NC Contact block NO Contact block Contact Holder Water resistant cover to suit single pushbutton Water resistant cover to suit double pushbutton M22-SF-NC M22-SF-NO M22-A3 M22-C1 M22-C2 22mm LED Pilot lights IP65 Voltage Red Green Blue White Yellow 12V DC L22 12V R L22 12V G L22 12V B L22 12V W L22 12V Y 24V DC L22 24V R L22 24V G L22 24V B L22 24V W L22 24V Y 220V AC L22 220V R L22 220V G L22 220V B L22 220V W L22 220V Y 17

Industrial Control 22mm Emergency Stop Complete assembly Specifications: IP65, 230V, 6A Contacts Illuminated Latching, Twist release Latching, Twist release Latching, key release Legend plate Guard 2 NC No M22E-TSF02 M22E-KSF02 LABEL EMERG STOP M22E-GR 1 NO + 1 NC 12-30V AC/DC M22EL-TSF11E30 Specifications: IP65, 240V, 3A Contacts Illuminated Latching, Twist release Latching, Twist release Latching, key release Legend plate Guard 2 NC No LMB22-2/NC Red EKS22-2N/C LABEL EMERG STOP PROTECTION GUARD 1 NO + 1 NC 24V AC/DC MBL22-10/C 24V LED R 22mm Emergency Stop Modular assembly Latching, Twist release Latching, key release Contact Holder Self Monitoring contact 1NC + 1NO 1 NC Contact 1 NO Contact MM263467 MM216879 MM216374 M22-K01SMC10S MM216378 MM216376 Palm switch IP67/69K 3xM20 1xM16 Description Red/Yellow 1 NC + 1 NO Red/Grey 1 NC + 1 NO Black/Grey 1 NC + 1 NO Dimensions Function Maintained Momentary Momentary MM229748 MM229746 MM229749 18

Switch to Schrack Austria s Leading Switchgear Manufacturer! Schrack, Austria s major supplier of Electro Technology, Lighting and Networking products, have partnered up with Switches Plus to bring you a full and innovative product package that will save you both time and money. Schrack, best known as a market leader in relay and circuit breaker technologies, based in Vienna, Austria, not only offers relays but a full suite of products to provide a one stop shop for electrical designers, consultants, contractors, board builders, equipment manufacturers and architects. To see the full product capability visit www.schrack.com

Industrial Control Cam Switches IP65, 22mm mounting A diverse range of Cam switches rated to IP65, with 22mm central fastening. Current Poles 0-1 1-0 - 2 1-2 Schematic A B C 20A 1 IN025120 IN026120 IN027120 20A 2 IN025220 IN026220 IN027220 20A 3 IN025320 IN026320 IN027320 32A 3 IN125325 Current Poles 1-2 - 3 1-2 - 3-4 START Schematic D E F 20A 1 IN023901 IN023902 IN0ZC102 Current Poles 0-1 - 2 0-1 - 2-3 Voltmeter Schematic G H I 20A 1 IN023904 IN023903 IN009V02 Schematic A B C D E L1 R L2 S L3 T N 0 J1 J2 V Schematic F G H I 20

Industrial Control Main Switches IP66, Padlockable AC-21 AC-3 AC-23 Rated Current Voltage Voltage Utilisation Category Utilisation Category 3 Pole Panel Mount 4 Pole Panel Mount with door clutch (length adjustable) 3 Pole Enclosed 20A 690V 3~400V 5.5 kw 7.5 kw IN8E2332 IN8A2432 IN8P2332 32A 690V 3~400V 11 kw 12.5 kw IN8E2334 IN8A2434 IN8P2334 63A 690V 3~400V 18.5 kw 22 kw IN8E2337 IN8A2437 IN8P2337 80A 690V 3~400V 18.5 kw 22 kw IN8E2338 IN8A2438 IN8P2338 125A 690V 3~400V 37 kw 45 kw IN8E233B 125A Modular Main Switch Din Mountable Controls of All Types and Sizes. Our time-saving and cost-efficient industrial control systems offer a complete world of functionalities to control industrial plants and machinery. AZ200223 Description 3 Pole load break disconnector 125A Whether you require main switches, emergency stops, cam switches or control and display signals, our perfectly designed, ergonomic control elements offer highest versatility and most diverse possibilities of usage in all types of industrial applications. Switches & Isolators Heavy Duty IP66 UV Stabilised Operating Environments -40 to +85 C Surface Mount Switches Isolating Switch Type 20 A 32 A 40 A 50 A 63 A 20 A 35 A 63 A 1 Pole M66SW120 M66SW132 MF-1-20 MF-1-35 MF-1-63 2 Pole M66SW220 M66SW232 MF-2-20 MF-2-35 MF-2-63 3 Pole M66SW320 M66SW332 M66SW340 M66SW350 M66SW363 MF-3-20 MF-3-35 MF-3-63 21

Power Supplies & Transformers Power Supplies Industrial grade, DIN rail mounted Compact size Universal input range (88-264V AC - 125-370V DC) Installation on 35mm DIN rail Built-in EMI filter Short circuit protection Over voltage protection Over current protection LED indicator for DC power ON (Green) LED indicator for DC low (Red) 3 year warranty INPUT OUTPUT +V L N LINE FILTER RECTIFIER CIRCUIT INRUSH CURRENT LIMIT P.F.C. CIRCUIT SWITCHING DEVICE RECTIFIER CIRCUIT CURRENT DETECT +V -V -V FG PWM CONTROL CIRCUIT ERROR AMP OVP DETECT OUTPUT DETECT (Green LED) DC OK DC LOW (Red LED) Output Power 70W 120W 180W 240W Output Current 3 A 5 A 7.5 A 10 A Output Voltage 24V DC 24V DC 24V DC 24V DC IS70-24 IS120-24 IS180-24 IS240-24 Bell Transformers Isolated windings, DIN rail mounted Din rail mountable bell transformer Includes PTC Protection Class IP40 Isolated windings Secondary Voltage Secondary Current Width Primary Voltage BZ326578 12-24 1.25A 53.5mm 220-240VAC BZ326579 12-24 2.62A / 5.25A 105mm 220-240VAC 22

WE TAKE CARE OF EVERYTHING IN THE ELECTRICAL CABINET Users of connection systems have come to rely on CONTA-CLIP s broad portfolio of products and for good reason. Our products are developed in close consultation with users and under the strictest quality standards. They are available worldwide and are designed to meet individual requirements.

DIN Terminals We are very well positioned with products for all connection methods; our pioneering solutions have made CONTA-CLIP a technological leader in many sectors. Whether you re using a screw-based, PushIn, tension-spring or stud-based wire connection system our portfolio is in line with market requirements. A broad range of connection types, and terminal configurations are available. Screw Connection system SRK RK The clamping yoke transmits pressure from the screw to clamp the wire conductor against the busbar. The required contact force is generated by the torque applied to the screw. Because of its construction, the clamping yoke is able to provide the strongest contact force and thus the lowest voltage drop. Application advantages Cross-sections from 0.2 mm² to 240 mm² Pluggable or screw-on cross-connection system Two potentials can be guided in parallel Cross-connections are possible between different cross-sectional areas using standard cross-connectors of up to 10 mm² PE foot contact on both sides, up to 35 mm², can be snapped on (no screws) to the DIN rail Additional connections from 4 mm² to 240 mm² PushIn Connection System FRK FSL The PushIn design makes wiring convenient and ensures the maximum level of contact security! Solid and stranded wires with wire-end ferrules can simply be inserted directly into the terminal point. A stainless steel spring ensures that the wire automatically established contact with the busbar. Application advantages Cross-sections from 0.2 mm² to 16 mm² Wire connection requires no tools Pluggable cross-connection system Two potentials can be guided in parallel PE foot contact on both sides, can be snapped on (no screws) to the DIN rail Tension-Spring Connection System ZRK ZSL The tension spring is used to hold the wire connection securely to the busbar. The stainless steel spring provides permanent contact force between the wire and the busbar. The tension spring is a fast connection method that can be used anywhere. Application advantages Cross-sections from 0.2 mm² to 16 mm² Pluggable cross-connection system Two potentials can be guided in parallel PE foot contact on both sides, can be snapped on (no screws) to the DIN rail Stud Connection System HSKG The Stud connection system secures the wires onto studs using ring cable lugs thus establishing safe electrical and mechanical connection to the busbar. Our hinged terminal covers provide touch protection and finger safety for all connections and applications where you are transferring power. Application advantages Cross-sections from 1.5 mm² to 300 mm² Stud connection sizes: M6, M8, M10, M12 to M16 Accessory installation requires no tools Covers and partitions are easy to customize for different voltage levels Combi-nuts prevent connection errors Current carrying capacity of up to 520 A 24

DIN Terminals Contained within this catalogue are the most commonly used Screw Connection DIN mount terminals. Many other options are also available - a few examples of the vast range are listed below. Test Disconnect Terminals Test-disconnect terminals are mainly used for electricity generation and supply applications. They are perfect for the wide variety of switching demands in the current-transformer secondary circuits that predominate in these applications. Current transformers must always have a closed secondary circuit, for use when electricity meters and measuring instruments are being replaced, or when making comparative measurements. All versions provide touch-safe protection in compliance with BGV A3. A captive, screw-on sliding partition is used to separate the current and voltage paths. The switch position is always easy to detect since the disconnect screw has a yellow insulating sleeve. In all versions, the STBI19/4 socket plugs can be contacted for a test pick-off using the PS 4 test plug or the conventional (4 mm) insulated test plugs. Pick off terminals and test adaptors The SMAG pick-off terminals make possible one or two additional wire connectors on to the SRK-terminal blocks and therefore extend the standard feed-through terminal by up to four connectors. The test adapter STA can be used to quickly and safely test pre-wired terminal blocks. A test plug block can be mounted with any number of poles using the locking pegs and the intermediate plate STA ZP with widths from 1 to 3 mm. The intermediate plate STA ZP allows the assembly of a test plug block, which can also be mounted on different block widths (SRK/SSL 2,5 4 6 10). High Temperature Terminals The new feed-through and fused terminals, made from glass-fibre reinforced polyamide PA 6.6 V0, have an extended temperature range up to +1400C (RTI elec.) and open up new application possibilities in electrical engineering. These products offer an interesting alternative to terminals blocks made from thermo-set duroplast, and are suitable for nonrecurring high temperatures in the production process or for continuous nearby temperatures in machines and facilities. The feed-through terminals are available in the cross-section range 4 mm² to 35 mm². They can be snapped on to a TS 35 rail. The SIK10/Z fused terminal is designed for holding 6.3x32 micro-fuses. The SK 1 fused terminals are available in various designs for 5x20 or 5x25 micro-fuses, with or without status displays. The glass-fibre reinforced terminal housing offers a secure grip on the contact element in the case of power loss from fuse cartridges caused by surge current or short circuits. Due to the material used, these products are only available in black! Thermocouple Terminals The TSK series can be used to extend thermocouple measurement circuits without introducing errors caused by incompatible junction materials. The CONTA-CLIP TSK terminals can be used to clearly label the thermal terminal pair in use. The busbars on the thermocouple terminals are made of the same materials as the compensating lines, in compliance with DIN 43713/DIN 43714. This ensures thermocouple signals are transmitted accurately on the junction between the thermocouple, thermocouple terminal and compensating line. Thus the base value maintained in accordance with DIN/ IEC 584. 25

DIN Terminals CONTA-CLIP offers an innovative line of feed-through and protective-earth terminals featuring the proven screw-connection system for cross-sections ranging all the way from 0.08 mm² to 120 mm². The screw-connection mechanism is easy to operate and can be used to establish a quick, safe connection using solid and flexible wires with or without wire-end ferrules. The protective-earth terminals feature a PE foot contact that is snapped on without screws, ensuring mechanical and electrical safety. Our well-designed line of accessories allows you to significantly reduce your installation and storage costs. The SQI pluggable potential distribution system can be used to multiply potential voltages horizontally. All of the insulating materials used in this product line are free of pollutants. They also comply with flammability class V-0 (self-extinguishing) according to UL 94. a b a d The connection Contact security The clamping yoke transmits pressure from the screw to clamp the conductor against the busbar. The required contact force is generated by the torque applied to the screw. Rising clamp design High contact force and contact security Minimal contact resistance Clear separation of electrical and mechanical functions Clamping yoke made from hardened steel: galvanized, chrome-plated and additionally thick-film passivated Busbars made of copper with tin surface treatment Resistant to vibration and maintenance-free Corrosion-free Low voltage drop Compact design Foot can be snapped on TS 35 DIN rail b Easy and safe to wire with an established connection system The screw-connection mechanism is easy to operate and can be used to establish a quick, safe connection using solid and flexible wires with or without wire-end ferrules. Simple and self-explanatory usage Can be used around the world A connection mechanism that has proven itself in millions of applications Generous wire-entry geometry Connection of multiple wires is possible PE foot contact on both sides can be snapped on (no screws) to TS 35 x 7.5 and TS 35 x 15 rails c e b c Housing insulation material Polyamide PA6.6 UL 94, flammability class V-0, self-extinguishing without burning drops Free of hazardous materials such as halogen or phosphor Creepage resistance: CTI 600 Operating temperature from -40 C to +120 C d Pluggable cross-connection options Distributing potentials with the pluggable SQI cross-connection system is quick and easy. Two cross-connection channels allow two voltages to be fed across when working with the standard terminals with rated cross-sections of 2.5 mm², 4 mm², 6 mm² and 10 mm². Available in 2 to 10 and 30 poles Simple to insert and thus quicker to install No insulation plates or partition plates required between neighbouring crossconnections, since the SQIs have a touch-safe protective design Cross-connection can carry the full rated current and voltage of the corresponding terminal block Individual terminals can be skipped over by breaking out contact pins in the cross-connector e Marking options For an easy and permanent labeling of terminals, the identification systems PMC SB, PMC BSTR and MC are available. To attach markers, standard terminals are equipped with up to four marker bars. The extensive accessory range includes rails, mechanical mounting parts and end supports, group marker holders, end plates and covers. 26

DIN Terminals Compact with identical shapes The external size and shape are identical for the SRK feedthrough terminal and the SSL PE terminal in the cross sections 2.5 mm², 4 mm², 6 mm² and 10 mm². Identical end plates and partition plates can thus be used. The width (pitch) of the terminal blocks is as follows: 2.5 mm² (5 mm), 4 mm² (6 mm), 6 mm² (8 mm) and 10 mm² (10 mm). Despite their small size, the SRK feed-through terminals have a rated voltage range of up to 1000 V. Large wire-entry bay The wire-entry bay is very spacious this permits quick wiring of solid or flexible wires, with or without wire-end ferrules. The rated cross-sections specified in our documentation correspond to a connection with stranded wires using wire-end ferrules. It is also possible to use solid wires up to the next larger cross-section size. Security and stability The insulated terminal housing with its special foot shape guarantees a convenient snap-on to the rail and a secure mount. Metal parts including screws, clamping yoke, busbars, and PE foot are securely mounted within the terminal housing. In addition, the screws are held captive from above by a screw brake mechanism. The PE terminals (SSL 2.5 to SSL 35) have a PE foot contact on both sides. It can be snapped on to rails (TS 35 x 7.5 and TS 35 x 15) with no need for screws and provides optimal mechanical and electrical security. Labelling High-quality, quick and concise labelling is possible when using the PMC SB, PMC BSTR and MC labelling systems. The standard terminals feature up to four labelling channels. Cross-connection system The standard feed-through terminals from 2.5 mm² to 35 mm² feature two cross-connection channels. So the two pole SQI /2 cross-connectors can be used to connect any number of terminals with each other Two cross-connection channels allow two voltages to be fed across when working with the standard terminals with rated cross-sections of 2.5 mm², 4 mm², 6 mm² and 10 mm². It is possible to shorten the SQI cross-connection with a cutting tool. The SQI system allows you to maintain touch protection safety by covering the cut (uninsulated) end with a SQIK insulation cap. It is possible to skip over terminal blocks by breaking out individual contact poles. Screw terminals with larger cross-sections and standard cross connectors can connect to a single terminal of the next size up for the power feed-in. The SQI cross-connection system can carry the rated voltage and rated current. 27

DIN Terminals Single tier feed through terminals Screw Connection One of the most cutting-edge screw connection terminal systems currently available on the market, the CONTA-CLIP SRK series combines all crucial innovations in the field of electric terminal blocks and satisfies even the most demanding quality requirements regarding stability, safety and easy handling. The series includes SRK feed-through terminals and SSL protective earth terminals in single and double level versions as well as SSIK fuse disconnect terminals. A very versatile range of accessories is available for all terminal types. 2.5mm² 4mm² 6mm² 10mm² 16mm² Rated Voltage (IEC) 1000V 1000V 1000V 1000V 1000V Ratings Rated Current 24A 32A 41A 57A 76A Maximum Current 32A 41A 57A 76A 101A Conductor size Solid/Stranded 0.2-4mm² 0.2-6mm² 0.2-10mm² 0.2-16mm² 1.5-25mm² Flexible 0.2-4mm² 0.2-6mm² 0.2-10mm² 0.2-16mm² 1-25mm² Flexible with ferrules 0.2-2.5mm² 0.2-4mm² 0.2-6mm² 0.2-10mm² 1-16mm² Beige 17100.2 17104.2 17108.2 17112.2 17124.2 Blue 17100.5 17104.5 17108.5 17112.5 Colour Red 17100.9 17104.9 White 17100.7 17104.7 Black 17100.4 17104.4 Plates Jumpers (cuttable to desired length) End Plate 2001.2 2001.2 2001.2 2001.2 17254.2 Partition 2002.2 2002.2 2002.2 2002.2 17247.8 98 pole Uninsulated 2151.0 2 pole Insulated 17201.8 17211.8 17221.8 17231.8 17247.8 10 pole Insulated 17209.8 17219.8 17229.8 17239.8 30 pole Insulated 17210.8 17220.8 17230.8 17240.8 End cap for cut insulated jumpers 17200.8 17200.8 17200.8 17200.8 35mm² 50mm² 70mm² 120mm² Rated Voltage (IEC) 1000V 1000V 1000V 1000V Ratings Rated Current 125A 32A 41A 57A Maximum Current 150A 41A 57A 76A Conductor size Solid/Stranded 1.5-50mm² 10-70mm² 10-95mm² 16-150mm² Flexible 1.5-50mm² 10-50mm² 10-70mm² 16-120mm² Flexible with ferrules 1.5-35mm² 10-50mm² 10-70mm² 16-95mm² Colour Beige 17140.2 17156.2 17161.2 17165.2 28

DIN Terminals Earth terminals Screw Connection 4mm² 6mm² 10mm² 16mm² 35mm² Conductor size Solid/Stranded 0.2-6mm² 0.2-10mm² 0.2-16mm² 1.5-25mm² 1.5-50mm² Flexible 0.2-6mm² 0.2-10mm² 0.2-16mm² 1-25mm² 1.5-50mm² Flexible with ferrules 0.2-4mm² 0.2-6mm² 0.2-10mm² 1-16mm² 1.5-35mm² Colour Green/Yellow 17107.2 17111.2 17115.2 17130.2 17145.2 Multi-tier feed through terminals Screw Connection 2.5mm² Triple 2.5mm² Double 4mm² Double 10mm² Double Rated Voltage (IEC) 1000V 1000V 1000V 1000V Ratings Rated Current 24A 24A 32A 57A Maximum Current 32A 32A 41A 76A Conductor size Solid/Stranded 0.2-4mm² 0.2-4mm² 0.2-6mm² 0.2-16mm² Flexible 0.2-4mm² 0.2-4mm² 0.2-6mm² 0.2-16mm² Flexible with ferrules 0.2-2.5mm² 0.2-2.5mm² 0.2-4mm² 0.2-10mm² Colour Beige 2268.2 17180.2 17185.2 17190.2 End Plate 2699.2 17292.2 17292.2 17293.2 Jumpers (cuttable to desired length) 2 pole Insulated 17201.8 17211.8 17231.8 10 pole Insulated 17209.8 17219.8 17239.8 10 pole uninsulated 2425.0 30 pole Insulated 17210.8 17220.8 17240.8 End cap for cut insulated jumpers 17200.8 17200.8 17200.8 2.5mm² Triple w/ earth 2.5mm² Double 4mm² Double 10mm² Double Ratings As above As above As above As above Conductor size As above As above As above As above Colour Beige/Earth 1425.2 17182.2 17187.2 17192.2 End Plate 2862.2 10 pole Insulated jumper 2141.0 29

DIN Terminals Fused and Disconnect terminals Screw Connection The STK 1 and STK D1 fuse-disconnect terminals feature a compact shape so they take up minimal space. The hinged lever is used to hold the fuse and locks into its open position. LED status displays are available for a variety of voltage ranges. The fuse-disconnect terminals SSIK feature an extraction lever that locks into its end position and allows a spare fuse to be attached from the side. Two crossconnection channels within the fuse-disconnect terminals allow for potentials to be distributed to adjacent fused and feed-through terminals from the SRK series using the standard 4mm² jumper bars. Two or three pole extraction levers can be coupled and operated simultaneously by using the VBS connection sleeves. They are available with or without a status display, whereby the display can be retro-fitted onto the base terminal at a later point in time. The black fuse holders listed below, have an extended temperature range up to 1400C 4mm² fuse terminal (STK 1) 4mm² fuse terminal w/- feed through (STK D1) 6mm² fuse terminal (SSIK) Ratings Rated Voltage (IEC) 400V 400V 500V Rated Current 6.3A 6.3A 10A Fuse size 5x20 5x20 5x20 Conductor size 0.2-4mm² 0.2-4mm² 0.14-6mm² Colour Beige 2190.2 1079.2 Black 17150.4 2 pole VBS connection sleeve 2873.3 2873.3 2873.3 3 pole VBS connection sleeve 2874.3 2874.3 2874.3 30 pole Insulated Jumper bar 17220.8 End Plate 2046.2 2187.2 17258.4 10mm² fuse terminal 10mm² fuse terminal 4mm² Disconnect Terminal Ratings Rated Voltage (IEC) 400V 400V 400V Rated Current 10A 10A 10A Fuse size 5x20 6.3x32 5x20 Conductor size 0.2-10mm² 0.2-10mm² 0.2-4mm² Colour Beige 1390.2 Black 1367.4 17041.4 End Plate 2047.4 Not required 30

DIN Terminals Din Rail and Accessories Supplied in 2 metre lengths The design of the TS35 DIN rail complies with the European norm DIN EN 60715. The steel DIN rail is galvanized and has a coating of blue chromate that is at least 10 µm thick. We place extra importance on maintaining a high degree of dimensional accuracy. The steel DIN rails can be used as protective-earth busbars (with PE function) in compliance with DIN VDE 0611 part 3. The DIN rails are delivered in standard lengths of 2 metres. Description TS35 x 7.5 Plastic clip-on end bracket Plastic screw-on end bracket Metal foot screw-on end bracket 4563.0 3748.2 2005.2 2828.0 Terminal Markers The AS 3/10 are suitable for labelling all terminal blocks, end stops or marker holders wider than 5 mm. The compact shape and onecharacter inscription allow the printed standard tags to be put together in any combination. Two or four tags (depending on the terminal block or end stop) can be attached to a single terminal. Supplied as 1 x strip of 10 characters. The markers can be attached to the SchT marker holder so that they are read vertically with from three to twelve characters. Material: Polyamide 6.6 UL 94-V2, halogen-free Marker Marker Marker Marker 2573.0001 1 2573.0200 A 2573.0211 L 2573.0222 W 2573.0002 2 2573.0201 B 2573.0212 M 2573.0223 X 2573.0003 3 2573.0202 C 2573.0213 N 2573.0224 Y 2573.0004 4 2573.0203 D 2573.0214 O 2573.0225 Z 2573.0005 5 2573.0204 E 2573.0215 P 2573.0419 + 2573.0006 6 2573.0205 F 2573.0216 Q 2573.0420-2573.0007 7 2573.0206 G 2573.0217 R 2571.1000 Green 2573.0008 8 2573.0207 H 2573.0218 S 2571.3000 Orange 2573.0009 9 2573.0208 I 2573.0219 T 2571.5000 Blue 2573.0000 0 2573.0209 J 2573.0220 U 2571.8000 Yellow 2571.0000 Blank 2573.0210 K 2573.0221 V 2571.9000 Red Terminal Strips With wire protection The EKB variants cover a rated cross-section range from 1.5 to 10mm². They are available from 1 to 12 poles. An attachment hole is located between each of the poles which guarantees proper mechanical alignment during installation. The terminal housing is made from high-quality polyamide (PA 6.6 UL 94-V2). 1.5-2.5mm² stocked lines, other sizes available upon request. Description 1817.0 1.5mm² 12 pole terminal strip with wire protection 1829.0 2.5mm² 12 pole terminal strip with wire protection 31

Contactors & Relays Installation Contactors Din rail mountable installation contactors typically used for heating, cooling and lighting applications. Meeting the needs of those involved in building and home automation as well as manufacturers, Schrack s din rail mountable modular contactors, can be used to switch and control lighting, heating, ventilation and air-conditioning, window shutters and most other control and automation applications. Schrack contactors are renowned throughout Europe for their quiet operation, high quality and affordability. Contacts Rated current (AC-1) Width Coil Voltage BZ326437ME 2 NO 20 A 17.5mm 220-240VAC BZ326438ME 1 NO + 1 NC 20 A 17.5mm 220-240VAC BZ326442ME 4 NO 40 A 53.3mm 220-240VAC BZ326444ME 4 NO 63 A 53.3mm 220-240VAC BZ326461ME 4 NO 25 A 53.3mm 220-240VAC Solid State Relays Panel Mount A range of solid state relays comprising of ratings from 10A to 40A at 24-280 V AC. Optically isolated. Input LED indicator. High dv/dt and high blocking voltage. Low input power consumption. TTL and CMOS Compatible. Zero voltage turn-on, zero current turn-off (minizes EMI/RFI). High surge rating allows lamp and motor load switching. Output snubber circuit protection. Input voltage Output ESR5002401000Z 4-32V DC!0 A ESR5002402500Z 4-32V DC 25 A ESR5002404000Z 4-32V DC 40 A ZRA6010F 80-280V AC 10 A ZRA6030F 80-280V AC 50 A Interface Relays 6.2mm wide Din rail mountable relay package The narrow housing of the new IRCU relays allows them to be used in very confined spaces. With their minimal width of only 6.2 mm, they open up new possibilities in designing control schemes. Their relay-terminal design makes them very versatile and gives you enormous potential for savings. Jumpers and partitions are also available (see IRCPU version) Mounts on TS 35 rail Internal EMC coil circuitry and LED display All-purpose use as coupling relay at PLC input, or in the output of the PLC for controlling actuators Screw connection 1 CO with 6 A rated load Contacts Rated Current Coil Voltage 16231.2 1 CO 6A 12V AC/DC 16232.2 1 CO 6A 24V AC/DC 16234.2 1 CO 6A 230V AC/DC 32

Contactors & Relays Interface Relays 6.2mm wide Din rail mountable fused relay package Similar to the IRCU version, the IRCPU with the fuse insert module can be used in all systems. It is unique in the way it meets the requirement that each coupling relay output can be protected by a replaceable 5x20 mm standard micro-fuse within the available 6.2 mm width. Mounts on TS 35 rail Internal EMC coil circuitry and LED display All-purpose use as coupling relay at PLC input, or in the output of the PLC for controlling actuators Screw connection 1 CO with 6 A rated load Fuse holder (ordered separately) accepts 5x20mm fuse. Contacts Rated Current Coil Voltage 16236.2 1 CO 6A 12V AC/DC 16237.2 1 CO 6A 24V AC/DC 16240.2 1 CO 6A 230V AC/DC Blue Black Red Partition Fuse Holder 16 pole jumper 16209.5 16209.4 16209.9 16208.2 Accessories 16209.9 It is delivered with a dummy plug inserted in the frame. The connections for the fuse are bridged internally, so that it can be used without a fuse module. The indicator pin is not visible when the product is delivered. When the fuse module is plugged in with an inserted fuse (dummy plug has been removed), the fuse is in series with the CO of the output connection (11). When the fuse module is pulled out (e.g. due to a failed fuse), the output remains cut off so that the cause of the blown fuse can be found (security logistics). In order to reactivate the output, either the fuse module must be fitted with a functional fuse and plugged in again, or the indicator pin must be moved gently in the direction of the arrow, as shown. 33

Contactors & Relays Interface Relays Base only - suits RT Power relay series The new PRC 2W relay bases enable the integration of relays with two CO contacts into our proven PRC relay system. This base also features the well known advantages of this system, including simple bridging with jumpers and a thin design. Mounts on TS 35 Very versatile and modular construction of individual relay bases User-friendly, because the relays can be easily replaced High-quality connection terminals Integrated EMC coil circuitry, and LED High-quality innovative mount/dismount lever Relay to be ordered separately Input voltage 15920.2 Suits 12 or 24V RT series relay Accessories Blue Black Yellow Partition 8 pole jumper 15930.5 15930.4 15930.8 Partition 15546.2 Using the mount/dismount lever The mounting and dismounting mechanism forms a reliable connection by latching the relay with the socket base. The fitted relay can be removed, easily and without force, from the socket base by using the dismount function of the lever! Relays PCB Power relay RT series Sensitive coil 400mW / 0.75 VA 5 kv / 10 mm coil-contact, protection class II (VDE 0700) Ambient temperature 85 C (DCcoil) Module height only 15.7 mm PCB and screwed socket available Rated current Contacts Coil Voltage RT314005 16A 1 CO 5VDC RT314012 16A 1 CO 12VDC RT314024 16A 1 CO 24VDC RT314110 16A 1 CO 110VDC RT314524 16A 1 CO 24VAC RT314730 16A 1 CO 230VAC RT424012 8A 2 CO 12VDC RT424024 8A 2 CO 24VDC RT424048 8A 2 CO 48VDC RT424110 8A 2 CO 110VDC RT424524 8A 2 CO 24VAC RT424730 8A 2 CO 230VAC 34

Contactors & Relays Relays Pluggable interface relay XT series DC or AC coil, sensitive coil 400mW Reinforced insulation, protection class II (VDE 0700) 4 kv / 8 mm coil-contact Manual test tab, optionally lockable Suitable for use in Tyco standard RT sockets Rated current Contacts Coil Voltage XT374LC4 16A 1 CO 24VDC XT484LC4 8A 2 CO 24VDC XT484R24 8A 2 CO 24VAC XT484T30 8A 2 CO 230VAC Accessories Suit RT and XT series RT78725 RT17017 XT17017 RT170R8 Description Din mount socket with screw terminals for RT & XT Series PCB Relays Retaining clip for RT-relays Retaining clip for XT and RP relays Jumper bar, 12 A, for connection of up to 8 RT-sockets Relays Pluggable interface relay PT series Switching performance up to 3000 VA Relay height 29 mm Cadmium free contact material Mechanical indicator, optional LED and protection diode Manual test tab, optionally lockable White marking tabs Rated current Contacts Coil Voltage Poles PT270024 12A 2 CO 24VDC 8 pin PT370024 10A 3 CO 24VDC 11 pin PT570024 6A 4 CO 24VDC 14 pin Poles Din mount socket Retaining clip for PT socket Jumper bar, 12A, for connection of up to 6 PT sockets 8 pin PT78702 11 pin PT78703 14 pin PT78704 PT17024 PT170R6 35

Contactors & Relays Relays Power relay RM series Mechanical indicator Push-to-test button Plug-in version, or chassis mount Din mount socket available RM7 & RM8-6000 VA switching capacity RMD 7500 VA switching capacity RM732012-C RM732024-C RM835024 RMD05024 RM78705 Coil Voltage 12VDC 24VDC 25VDC 24VDC S0298-AA Rated Current 16A 16A 25A 30A Contacts 3 CO 3 CO 2 CO 1 NO Terminals Plug-in 6.3mm Quick Connect Suits plug-in terminals Note With integrated bracket S0298-AC Relays Multimode relay MT series Rated current Contacts Coil Voltage Poles 2 CO or 3 CO contacts DC and AC coils Cadmium free contact material Mechanical indicator as standard Optional electrical indicator New test system with front operated finger protected push-to-test button and integral locking test tab White write on panel MT221012 10A 2 CO 12VDC 8 pin MT221024 10A 2 CO 24VDC 8 pin MT226024 10A 2 CO 24VAC 8 pin MT226230 10A 2 CO 230VAC 8 pin MT321012 10A 3 CO 12VDC 11 pin MT321024 10A 3 CO 24VDC 11 pin MT326012 10A 3 CO 12VAC 11 pin MT326024 10A 3 CO 24VAC 11 pin MT326230 10A 3 CO 230VAC 11 pin S0296-A Poles Din mount socket 8 pin YMR78701 11 pin MT78740 36

Timers Multifunction Timer 6.2mm wide Din rail mountable multi-function timer MFR-IRC timing relays embody a new strategy for 6.2 mm coupling relays. It also features the innovative receptacle for holding additional 5x20 mm SM-IRC fuse modules. Base terminal and pluggable relay Mounts on TS 35 Multifunction timing relay with eight time functions and four time ranges configurable with DIP switch up to six hours Output fuse module for individual standard micro-fuse (5x20 mm) available as accessory Internal EMC coil circuitry and LED display Pluggable cross-connection (blue, black, red) makes installations easier Screw connection Contacts Rated Current Supply Voltage 16256.2 1 CO 6A 24V AC/DC 16 pole jumper Blue Black Red 16209.5 16209.4 16209.9 Time Delay Range Accessories Partition Fuse Holder 16209.9 16208.2 Functions without control input (A) On Delay (DI) ON Pulse The start is triggered by applying the operating voltage (U). The relay switches to the working position after the adjustable time delay. The start is triggered by applying the operating voltage (U). The relay switches immediately to the working position. The relay switches to the rest position after the adjustable wipe time interval. (GI) Fixed pulse (0.5 s) delayed When the operating voltage (U) is applied and the set delay time has expired, the relay switches for 0.5 seconds in the working position. (SW) Blinker ON beginning The relay switches to the working position when the operating voltage (U) is applied. The relay switches to the rest position after the pulse time interval, and then switches back to the working position (pulse time = pause time). Functions with control input (BE) OFF delay with control contact The operating voltage (U) is connected. The relay switches immedi- ately to the working position when the start contact (S) is closed. The adjustable OFF delay begins when the start contact opens. (CE) ON and OFF delay with control contact The operating voltage (U) is connected. The start contact (S) closes. The relay switches to the working position after the adjustable time delay. The relay switches to the rest position after the start contact opens and the delay time has expired. (DE) Impulse-ON with control contact The operating voltage (U) is connected. The relay switches immediately to the working position when the start contact (S) is closed. The adjust- able Impulse-ON time begins when the start contact closes. (EE) Impulse-OFF via opened start contact The operating voltage (U) is connected.the relay switches immediately to the working position when the start contact (S) opens. The adjustable impulse-off time begins when the start contact opens. 37

Timers Multifunction Timer Multifunction time relay with auto sensing input voltage This unique din rail mountable, wide-voltage 12-240V AC/DC Multi-function timer, will allow you to stock only one item to perform up to 7 selectable functions. Modular in design at only 17.5mm wide, this small package has 7 time ranges from 1 second to 100 hours. Packing an 8 Amp change over switching capacity at 250V, this timer is easy to program to fulfil the bulk of switching functions required today; On delay, Off delay, Single shot leading edge with control input, Single shot trailing edge with control input, On delay with control input, Single shot leading edge voltage controlled and Flasher pause first. Functions The functions has to be set before connecting the relay to the supply voltage. E ON delay R OFF delay Ws Single shot leading edge with control input Wa Single shot trailing edge with control input Es ON delay with control input Wu Single shot leading edge voltage controlled Bp Flasher pause first Time ranges Time range Adjustment range 1 s 50 ms 1 s 10 s 500 ms 10 s 1 min 3 s 1 min 10 min 30 s 10 min 1 h 3 min 1 h 10 h 30 min 10 h 100 h 5 h 100 h Indicators Green LED U/t ON: indication of supply voltage Green LED U/t flashes: indication of time period Yellow LED R ON/OFF: indication of relay output Input circuit Supply voltage: 12 to 240 V AC/DC Rated consumption: 6 VA (2 W) Rated frequency: AC 48 to 63 Hz Duty cycle: 100% Reset time: 100 ms Residual ripple for DC: 10% Drop-out voltage: >30% of minimum rated supply voltage Rated surge voltage: 4kV Output circuit 1 potential free change over contact Rated voltage: 250 V AC Switching capacity: 8 A / 250 V Fusing: 8 A fast acting Mechanical life: 20 x 10 6 operations Electrical life: 2 x 10 5 operations at 1000 VA resistive load Switching frequency: max. 60/min at 100VA resistive load max. 6/min at 1000VA resistive load Rated surge voltage: 4kV Contact Functions Input voltage ZR5MF011 1 x 8A CO 7 function 12-240 VAC/DC Single function Timers Single function time relay with auto sensing input voltage Functions The functions has to be set before connecting the relay to the supply voltage. E ON delay R OFF delay Time ranges As above Indicators As above Input circuit Supply voltage: Rated surge voltage: 24 to 240 V AC 24 to 48 V DC 2.5kV Output circuit 1 potential free change over contact Rated voltage: 250 V AC Switching capacity: 5A / 250 V Contact Functions Input voltage ZRAE0011 1 x 5A CO On Delay 24-48 VDC 24-240 VAC ZRAR0011 1 x 5A CO Off Delay 24-48 VDC 24-240 VAC 38

Time Switches Analogue, Digital, single or multi-channel Schrack, have a time switch solution for you. Made in Germany, our Time switches have been designed and proven to last the test of time. Din rail mountable and modular in design, our time switch range offers you an intuitive and user friendly interface and are packed with features. Model dependent you can get up to 16A @ 250VAC, Multi-channel change over switching, 10 year battery back-up, 56 memories and more. 24 Hour Analogue Din rail mounted Operating voltage 230 V AC Frequency 50 Hz Number of channels 1 Program 24 hour Width 17.9 mm Installation type DIN rail Type of connection Screw terminals Drive Synchronous motor Switching capacity at 250 V AC, cos φ = 1 16 A Switching capacity at 250 V AC, cos φ = 0,6 4 A Shortest switching times 15 min Programmable unit 15 min Number of switching segments 96 Time accuracy Synchronised with mains Type of contact NO contact Switching output Potential-free and phase-independent Stand-by consumption 0,9 W Test approval VDE Housing and insulation material High-temperature resistant, selfextinguishing thermoplastic Type of protection IP 20 Protection class II as per EN 60730-1 Ambient temperature -25 C +50 C BZT26448 Description 24 Hour Analogue Time Switch 24 Hour Analogue with battery backup Din rail mounted, simple summer/winter time correction Operating voltage 230 V AC Frequency 50 Hz Number of channels 1 Program 24 hour Width 52.5 mm Installation type DIN rail Type of connection Screw terminals Drive Quartz-controlled stepper motor Switching capacity at 250 V AC, cos φ = 1 16 A Switching capacity at 250 V AC, cos φ = 0,6 4 A Shortest switching times 30 min Programmable unit 30 min Number of switching segments 48 Time accuracy ± 1 s/day (quartz) Type of contact Changeover contact Switching output Potential-free and phase-independent Stand-by consumption 0,1 W Test approval VDE Housing and insulation material High-temperature resistant, selfextinguishing thermoplastic Type of protection IP 20 Protection class II as per EN 60730-1 Ambient temperature -25 C +50 C BZT27131 Description 24 Hour Analogue Time Switch w/- backup 39

Time Switches 7 Day Digital Din Rail Time switch with 10 year Li-Ion battery back up Digital time switch with 1 channel 7 day program. The BZT26440 has a power reserve of 10 years with battery backup supplied by the built in Li-Ion battery. Spring Clamp Terminals Operating voltage 230 V AC Frequency 50-60 Hz Width 17.5 mm Installation type DIN rail Power reserve 10 years Switching capacity at 250 V AC, cos φ = 1 16 A Switching capacity at 250 V AC, cos φ = 0,6 4 A Shortest switching time 1 minute Time accuracy ± 0.5 s/day (quartz) Stand-by consumption 0,4 W Test approval VDE Type of protection IP 20 Protection class II as per EN 60730-1 Ambient temperature -25 C +55 C BZT26440 Description Schrack 7 Day Digital Din Rail Mounted Modular Time Switch 17.5 mm wide. 10 Year Battery Back up Li-Ion. 230VAC Single Channel Normally Open. Switching Capacity 16A 250VAC 56 Memory locations Backlit Display, Auto Summer / Winter time. Integrated Operating Hours Counter. Day/Week Digital Din Rail Time switch with auto Summer/Winter time correction Digital time switch with daily and weekly program. User interface with icons on the display. Screw terminals. Simplified summer-/winter time changeover. Operating voltage 230 V AC Frequency 50-60 Hz Width 35 mm Installation type DIN rail Power reserve 3 years Switching capacity at 250 V AC, cos φ = 1 16 A Switching capacity at 250 V AC, cos φ = 0,6 6 A Shortest switching time 1 minute Time accuracy ± 0.5 s/day (quartz) Stand-by consumption 4.5 W Test approval VDE Type of protection IP 20 Protection class II as per EN 60730-1 Ambient temperature -25 C +55 C Description Channels / Contacts BZT28371 BZT28372 Schrack Day / Week Digital Din Rail Mounted Modular Time Switch 35 mm wide. 230VAC Single Channel Change Over Contact. Switching Capacity 16A 250VAC 28 Memory locations Auto Summer / Winter time. Schrack Day / Week Digital Din Rail Mounted Modular Time Switch 35 mm wide. 230VAC Two Channel Two Change Over Contacts. Switching Capacity 16A 250VAC 56 Memory locations Auto Summer / Winter time. 1 Channel 1 x CO contact 2 Channel 2 x CO contact 40

Lighting Control Wall mounted Twilight Switches Photoelectric switch with integrated light sensor Fed up with the sub-standard, unattractive twilight switches that just don t perform? Then switch to Schrack s German made Twilight Switches. These great looking IP55 rated wall mounted switches are designed with you and your customer in mind. Fitted with large terminals and capable of switching 16A @ 230V Schrack s twilight switches have infinitely adjustable switching brightness and a large light exposure range of approximately 180 degrees. For the installer, a built-in test button is integrated, and can be triggered without opening the device. Operating voltage 230 V AC Frequency 50-60 Hz Number of channels 1 Stand-by consumption 0,6 W Setting range (brightness) 5-200 lx Preset brightness value 15 lx Switch on/off delay 40 s Type of contact 1 NO Installation type Wall mount or mast bracket Switching capacity at 250 V AC, cos φ = 1 16 A Test approval VDE Type of protection IP 55 Protection class II Ambient temperature -35 C +55 C Dimensions 118 x 85 x 49mm BZT27800 Description Schrack Wall Mounted Photoelectric Switch with Integrated Light Sensor. Normally Open Contact. Switching Capacity 16A 250VAC Fixed on and off switching delay to avoid false triggering. Light Exposure angle of approx 180 degrees. Test Button Emergency Light Test Relay Intergated Test Button, Adjustable times, 1 CO contact Single shot leading edge with control contact (Ws) The supply voltage U must be constantly to the device (green LED U/t illuminated). Pressing the integrated test key forces the output relay R to switch into on-position (yellow LED illuminated), so the emergency ligths are disconnected from the mains and the set interval t begins (green LED U/t flashes). After the interval t has expired (green LED U/t illuminated), the output relay R switches into off-position (yellow LED not illuminated) and the emergency lights are reconnected to the mains. During the interval, the test key can be operated any number of times. Prolonged pressure on the test key (>2s) aborts the running test interval (green LED U/t flashes fast) and a further cycle can be started. For light loads greater than 16A, our Modular contactors can be used to increase switching capacity. Time ranges 10min, 30 min, 60 min, 90 min, 2h and 3h Indicators Green LED U/t ON: indication of supply voltage Green LED U/t flashes: indication of time period Yellow LED ON/OFF: indication of relay output Input circuit Supply voltage: 230 V AC Rated consumption: 2 VA (1 W) Rated frequency: AC 48 to 63 Hz Duty cycle: 100% Reset time: 500 ms Drop-out voltage: >30% of minimum rated supply voltage Rated surge voltage: 4kV Output circuit 1 change over contact Rated voltage: Switching capacity: Start up peak (20ms) 250 V AC 16A 80A ZR5RT011 Description Emergency Light Test Relay 41

Also available... Shielding systems In the field of industrial process engineering, a high degree of interference immunity is required of electrical equipment. This is a critical factor affecting the availability of industrial measurement and control systems. When constructing low-interference systems, both the cable shielding and the shielded ground are very important. The juncture where the cable shielding connects to the housing ground is a critical point. The connection should be low-ohm and should also feature minimal inductive resistance. You should be certain that this connection can be established in a practical, simple and quick manner. CONTA- CLIP s SAB/SSAB shielding systems represent one of the most comprehensive portfolios on the market. They offer a perfect solution for any application. Modular feed-through terminal system CONTA-CLIP s SDK series is a modular feed-through terminal system for diverse applications in device and enclosure technology. By combining coordinated system components, different voltage levels of up to 1,000 V (UL 600 V) for a rated current of up to 32 A can be provided. Optional use of isolating, spacer and adapter plates ensures maximum rated voltage up to pollution degree 3 for 0.2 mm² to 6 mm² wire diameters. Twopiece feed-through terminals for 1-4 mm sheet thickness are available with a screw connection system or with a combined screw/soldering connection system, tailored to the requirements of encapsulated devices and ensuring maximum tightness in all applications. Remote Monitoring & Control - GSM PRO CONTA-CLIP s GSM-PRO module offers a remote control and maintenance solution which allows you to monitor and control decentralized facilities. The GSM-PRO module informs you when the process reaches a user-defined status or limit value. Digital and analogue inputs values can also be transmitted via e-mail or SMS (text message). The digital relay outputs can be switched using an SMS sent from the decentralized control room or from the service technician. Thus the process can be monitored and controlled remotely. Monitoring and controlling the GSM-PRO module is even easier when you use our iphone or Android App. If you are using multiple modules and you need a complete overview of all modules in the field at a glance, then CONTA-CLIP s portal software provides another helpful solution. The GSM-PRO module features eight multi-function inputs. The input module may be selected as either digital (24 V DC) or analogue (0 to 10V), so that many different signal levels can be connected. A designated person or group from the built-in address book will then be notified with an SMS or e-mail message if a specified status changes on the input side. The software allows you to easily specify the notification status, the person or group to be notified, and the content of the SMS. You can also query the current status of the process or machine simply by sending a query SMS message. The query message can specify specific inputs or all inputs. The GSM-PRO module features four relay outputs (four COs) with 250V/5A. The versatility of the outputs enables machine and facility functions to be controlled even when you are not on-site. The status of one or more outputs can be queried with a single SMS text message. When a process requires a control pulse, the outputs can also be controlled with an SMS. An output can also be activated simply by calling it up when using the call-in function. 42

Light Towers Premium LED Light Towers IP65 Modular design and function with bayonet locking system and polycarbonate construction. Available in 50m and 70mm Ø versions. Fast to install, configure, add to and change modules. Modular construction with bayonet locking system. Range of mounting options. LED light source for trouble free operation (24V AC/DC version) 50mm Ø Modules and base IP65 Light function Voltage Amber Red Green Vertical mount base 100mm Steady (SDC) up to 240V AC 750 001 900 750 002 900 750 006 900 790 542 900 ** incandescant lamp sold separately p/n 890 010 913 (230v 6w), 890 010 904 (12v 5w), 890 010 905 (24v 6.5w) 70mm Ø Modules IP65 Light function Voltage Amber Red Green Blue Clear Yellow Steady (SDC) 24V AC/DC 211 501 405 211 502 405 211 506 405 211 505 405 211 504 405 211 507 405 Flashing (SDA) 24V AC/DC 221 501 405 221 502 405 221 506 405 221 505 405 221 504 405 221 507 405 Rotating (SDR) 24V AC/DC 231 501 405 231 502 405 231 506 405 231 505 405 231 504 405 231 507 405 Steady (SDC)** up to 240V AC 210 501 900 210 502 900 210 506 900 210 505 900 210 504 900 210 507 900 Strobe (SLF) 240V AC 230 506 313 230 507 313 ** incandescant lamp sold separately p/n 890 010 913 (230v 6w), 890 010 904 (12v 5w), 890 010 905 (24v 6.5w) 70mm Ø Mounting bases and alarm module IP65 Horizontal mount base M20 Vertical mount base Vertical mount base 250mm Piezo Alarm module 24V AC/DC* 200 500 900 200 600 900 200 703 900 247 500 405 * Continuous or pulsing tone, and volume (90/107dB) selectable via DIP switch 43

Beacons and alarms 22mm Anti-vandal Pilot lights IP67, M12 thread, 5mm LED Voltage Red Green Blue White Yellow 24V AC/DC IL-NI-05-R-4-N IL-NI-05-G-4-N IL-NI-05-B-4-N IL-NI-05-W-4-N IL-NI-05-Y-4-N 45mm Ø Panel Mount LED Beacon and Alarm IP65, M22 mount, Steady, 98dB Voltage Amber Red Green Blue 24V AC/DC 813 521 405 813 522 405 813 526 405 813 525 405 65mm Ø Panel Mount LED Beacon IP65, M22 mount, Steady or Flashing (chosen via terminal) Voltage Amber Red Green Blue 24V AC/DC 802 501 405 802 502 405 802 506 405 802 505 405 240 V AC 802 501 313 802 502 313 802 506 313 802 505 313 65mm Ø Panel Mount LED Beacon and Alarm IP65, M22 mount, Steady or Flashing (chosen via terminal), 103dB Voltage Amber Red Green Blue 12V AC/DC 814 511 404 814 512 404 814 516 404 814 515 404 24V AC/DC 814 511 405 814 512 405 814 516 405 814 515 405 44

Beacons and alarms 65mm Ø Xenon Strobe Beacon IP65, Xenon tube included Voltage Amber Red Green Blue Clear 24V AC D118 522 305 D118 525 305 24V DC D118 521 005 D118 522 005 D118 526 005 D118 525 005 D118 524 005 240 V AC D118 521 313 D118 522 313 D118 526 313 D118 525 313 D118 524 313 93mm Ø LED Flashing Beacon and Siren Cost effective LED flashing beacon with integrated electronic multitone (2-32 tones) siren Voltage Lens Colour Housing Colour Sound level C111 221 005 24V DC Amber White 88-109dB C111 222 005 24V DC Red White 88-1090dB C111 621 005 24V DC Amber Red 88-1090dB C111 622 005 24V DC Red Red 88-1090dB 94-132mm Ø Q Series LED Beacon and Alarm Steady or Flashing (chosen via terminal), IP66 with gasket, 32 tone alarm Size Voltage Amber Red Green Blue Alarm 94mm Ø 24V AC/DC 874 161 405 874 162 405 874 166 405 874 160 405 132mm Ø 24-48V AC/DC 874 261 408 874 262 408 874 266 408 874 265 408 874 260 405 132mm Ø 110/240V AC/DC 874 261 413 874 262 413 874 266 413 Long Life Cubic Design LED Steady/Flashing Beacons stocked in 94mm and 132mm profiles. Versatile installation and mounting options. Also available in 184 and 228mm profiles. Easily combined with other beacons or sounders to create traffic and other industrial solutions. Size Metal bracket Gasket 94mm Ø 874 031 900 874 021 900 132mm Ø 874 032 900 874 022 900 45

Alarms M28 Audiolarm II Approx 1 Ø, mounting hole 29mm - IP68 with gasket Floyd Bell s AudioLarm II Series, first developed, sold and launched in 1982 and the subject of continuous improvement and innovation, is a solid-state, environmentally secure piezo electric alarm that has become the most widely used industrial alarm in the world. This series has grown to become the industry s largest selection of piezo electric alarms. The AudioLarm II Series is available in four different tones (continuous, beep, warble & chime), features three sound output levels (extra loud, loud and medium), four beep rates (ultra-fast, fast, medium, slow) and two chime rates. Our optional shutter-type manual volume control provides variable attenuation of up to 20 db. Tone Volume Sound level Voltage Termination MC-07-130-SR Continuous Medium loud 93dB 1-30V DC Screw MC-07-530-SR Continuous Medium loud 95dB 5-30V DC Screw MW-V07-530-SR Warble Loud with volume control 95dB 5-30V DC Screw MW-09-201-S Extra fast warble Medium loud 95dB 30-120V AC Screw MW-09-301-SR Extra fast warble Loud 95dB 130-240V AC Screw MW-09-530-SR Moderate warble Medium loud 95dB 5-30V DC Screw MW-09-531-Q Moderate warble Medium loud 95dB 5-24V DC 6.3mm Quick Connect MW-09-550-SR Extra fast warble Medium loud 95dB 15-36V AC/DC Screw XB-09-312-SM Beep Ultra loud 103dB 5-12V DC Screw XC-09-212-W Continuous Ultra loud 108dB 5-15V DC Wires G-79 Gasket to suit M28 Turbo alarm Approx 1 Ø, mounting hole 29mm - IP68 with gasket Floyd Bell s stylish new Turbo Series piezoelectric alarms are twice as loud and half the size of industry counterparts. The tamper resistant front-mounting case with threaded attachment ring provides a watertight seal when used with our optional gasket. Turbo series alarms are available in seven different tones (continuous, beep, warble, siren, whoop, staccato, and chime) Our new, optional rotary volume control has twice the attenuation of industry counterparts. Tone Volume Sound level Voltage Termination TXC-86-515-WR Continuous Loud 103dB 9-30V DC Wires TXC-V86-515-QR Continuous Loud with volume control 103dB 9-30V DC 6.3mm Quick Connect TXO-86-515-WR Whoop Loud 103dB 9-30V DC Wires TXT-86-515-WR Staccato Loud 103dB 9-30V DC Wires TXW-86-515-SF Fast warble Loud 103dB 5-15V DC Screw TXB-V86-515-QF Fast beep Extra Loud with volume control 103dB 5-15V DC 6.3mm Quick Connect TMC-86-530-Q Continuous Medium Loud 103dB 5-30V DC 6.3mm Quick Connect 46

Alarms M28 Twin Turbo Alarm with indicator Approx 1 Ø, mounting hole 29mm - IP68 with gasket Floyd Bell s ground-breaking new Twin Turbo Lighted Alarm is a small (approx. 1 x1 ) panel-mount piezoelectric audio alert that emits a daylight-viewable bright light when activated, effectively combining Floyd Bell s popular Turbo series Alarms with Turbo Light Series Panel Indicators into one convenient multi-sensory alarm device. Available in 7 different tone types, the sound output measures up to an impressive 103dB at 2 feet! The energy efficient, two-terminal lighted alarms operate at various voltages in the 9-30 VDC range while drawing only 50-110mA. Tone Colour Sound level Voltage Termination TLHB-88G-930-QF Fast beep Green 103dB 9-30V DC 6.3mm Quick Connect TLHC-88G-930-Q Continuous Green 103dB 9-30V DC 6.3mm Quick Connect TLHC-88Y-930-Q Continuous Yellow 103dB 9-30V DC 6.3mm Quick Connect TLHO-88Y-930-Q Whoop Yellow 103dB 9-30V DC 6.3mm Quick Connect TLHS-88B-930-Q Siren Blue 103dB 9-30V DC 6.3mm Quick Connect TLHW-88W-930-QF Fast warble White 103dB 9-30V DC 6.3mm Quick Connect Floyd Bell produces the highest quality piezo electric alarms in the world. How do we do it? We first introduced our piezo based alarms in 1972, and since that time, our research and development department has continuously improved not only the functionality, but also the components, circuitry, manufacturing processes and testing procedures. As a result, our alarms produce a higher decibel output than any alarms of similar size. Our alarms are typically much smaller, resulting in more application versatility for our customers at a reduced cost. In addition, our alarms are more environmentally secure than any other alarms on the market, resulting in a longer, corrosion-free lifespan. We only use stainless steel piezo elements in our alarms, compared to brass elements used by our competitors. The environmental qualities of stainless steel are well know and far superior to brass. Floyd Bell also utilizes an expensive process joining the contact leads to every piezo element that we use in our alarms. This treatment dramatically increases the reliability, durability and lifespan of the piezo element and thus of every Floyd Bell alarm. Our competitors do not utilize this process to treat their crystals because of the associated cost. Floyd Bell uses only the finest PCBs (Printed Circuit Boards). Our PCBs are double-sided and fully plated through. This dramatically increases the integrity of every Floyd Bell alarm by increasing the strength of every solder joint and the stability of our alarms in virtually any environment. Our PCBs are solder-masked and the material is UL-94VO rated. All of our PCBs are pre-routed to reduce component stress in de-paneling. 30/45/65mm Ø Panel Mount Alarm IP65, M22 mount, 85-100dB Tone 30mm Ø 85dB 30mm Ø 85dB 45mm Ø 85-100dB* 65mm Ø 85-105dB* Continuous/Pulsing 812 110 405 812 510 405 813 500 405 Continuous/Pulsing/Warble 814 500 405 *Adjustable via potentiometer 47

V 16.4.05.1