SHEET 1 OF 6

Similar documents
VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents

GATE VALVES ALV-1 FORGED STEEL NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS. ANSI Class PN /4-2 DN 8-50.

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve

4/2- and 4/3-way shut-off valve

13V399AN-DC DRAWN BY DATE CHK SCALE SIZE

BIMETAL-POINTER-THERMOMETER

Molded Interior Door Cambridge. Product Detail Sheets Table of Contents

TOP CAP KNOCK-OUTS FOR

PREFILL AND EXHAUST VALVE PV 100 TO PV 200

Installation Instruction

DIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION

1 SGI 500XT INVERTER TRANSFORMER WITH OUTDOOR ENCLOSURE CONDUIT, FITTINGS AND CONDUCTORS AS REQUIRED

BERMAD Waterworks. 400 Series. Basic Valve. ??????? WW-400 Basic Valve

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

2/2 Solenoid Operated Seat Valve, ISO Size 03

330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15

CS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")

STANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES

Section 6. Transformers. Table of Contents. General Purpose, Dry Type, 600 Volts and Below. Industrial Control. Instrument, 600 Volt Class

2/2 Solenoid Operated Seat Valve, ISO Size 03

3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation

CV3000 Series Smart-Port Single Seated Control Valves with Steam Jacket Model HLS

Y03002/ Prefill Exhaust Valve. Description

00083FAB-DC DRAWN BY DATE CHK SCALE SIZE

Transmission and Driveline. Section 2A - Transmission and Driveline

DIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS

NET-ACCESS S TYPE VED READY CABINET 600mm WIDE X 1200mm DEEP FAMILY 12V343ST-DC VED TOP CAP FRONT PERFORATED SINGLE HINGE DOOR SPLIT SIDE PANEL

SEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS

WATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL

THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.

Directional Control Valves. General Description. Features. Specifications

SECTION A-A

PRODUCT SPECIFICATION C00 Converter. 48/36V to 12V, 20 Amps w/switched Output

330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY

203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY

Plug-in connectors for power electronics

Lincoln Under-cabinet Light Installation Instructions

THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.

RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007

CS 7780 FULL FUNCTION DRIVE-UP TERMINAL

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6

4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:

2/2, 3/2 and 4/2 directional poppet valve with solenoid actuation

OPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT

TFM 1600 Seat Body Material: Stainless. PTFE Seat Body Material: Stainless and Brass. Catalog No. V81-5 Sept. 2008

Print This Page. Return To Index

Fire dampers. The art of handling air. Type FKA-EU tested to EN FKA-EU/DE/BE/en. according to Declaration of Performance

R E V I S I O N REV. DRAWN BY ECO No DESCRIPTION DATE APPROVED BILL OF MATERIALS

Decor Radiators Baseboard

DIEBOLD IN LOBBY TELLER (ILT) PORTRAIT OR LANDSCAPE INSTALLED WITH A COIN RECYCLER SIDE CAR PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7

CC-410 KIT SERIES INSTRUCTION SHEET

DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES

Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

See pages 2, 7 and 8 for ATEX ratings OUTLINE, PUMP, S1F, CENTER PORTED AIR VALVE No-lube, no-stall design H.1

WARNING: IF THERE ARE ANY DISCREPANCIES BETWEEN THE CAD FILE AND THE DRAWING, THE DRAWING WILL TAKE PRECEDENCE. IF IN DOUBT, ASK.

9900 IN LOBBY TELLER - (ILT) PORTRAIT AND LANDSCAPE DISPLAY PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 6 CALL

4/2 and 4/3 Solenoid Directional Valve, ISO Size 03

152mm (6") DIA. POINT TO POINT SYSTEM PVC OR STEEL TUBE SYSTEM TYPE I AND TYPE II OVERHEAD UNITS TYPE I OVERHEAD UNIT TYPE II OVERHEAD UNIT NOTES:

COIN DISPENSER SIDE CAR FOR INSTALLATION NEXT TO DIEBOLD IN LOBBY TELLER (ILT) PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 CALL

KDA 24 SERIES OPERATOR MANUAL. KEPCO An ISO 9001 Company. ALARM MODULE I INTRODUCTION II FEATURES

Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.

UBAN Series. Direct operated pressure reducing valve. Suitable for: Air & process gases. Liquids. Steam. Markets: Oil & gas. Blanketing systems

SSAB Water mains PIPES AND FITTINGS

Brazed heat exchanger XB

POWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch

Spring Return DuraDrive Two-Position Actuator

6/2 way directional valve type 6/2UREM6 and 6/2URMM6

Electrically controlled directional control poppet valve type UREZ6

Model 1001/1001HPS Drinking Fountain

GLM PULSA ENGINEERED PRODUCTS PULSA.COM/PULSAGLM. Flow: up to 845 gph (3,200 lph) Pressure: up to 175 psi (12 bar)

Name Model Description/Function. Directional Control Valve Station 5914 Used to activate the Pneumatic Box Feeder B

Data Sheet T /4/5/6 EN

DIESEL EGT GAUGE INSTALLATION INSTRUCTIONS P14D AA

RTD Temperature Sensor omnigrad S- TR 88

MPC COBRA SERIES. Manually Programmable Cylindrical Lock D

2/2, 3/2 and 4/2 directional seat valve with mechanical, manual or fluidic operation

POWER BUTTON: 25mm (1") CONDUIT X 3048mm (10'-0") LONG TO HOUSE POWER AND CONTROL CABLES (SUPPLIED BY DIEBOLD)

Ex-proof proportional valves multicertification ATEX, IECEx, EAC

ADCATROL INTERMITTENT BLOWDOWN VALVES VPA 26 (Fabricated steel)

* * * 3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION

MANHOLE GRADE RING HEIGHT = 40mm*, 50mm, 75mm 75mm WITH STEP CON CAST PIPE STENCIL ISOMETRIC VIEW MATERIAL LIST PLAN VIEW PRODUCT VARIABLES

DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2

631 ALLOWANES AND TOLERANCES

CCD-493 KIT SERIES INSTRUCTION SHEET

Solenoid Pilot Operated Directional Control Valve

Two-Position Electric Duplex Room Thermostats

EXPLOSION PROOF DIRECTIONAL CONTROL VALVE TYPE ED6 SERIE 6X NEC STANDARD

JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks

MINI COMBICON Double-Level Headers for Through Hole Reflow Processes, MCDN 1,5/ 3.5 mm Pitch

* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION

Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273

Appendix E D791 and T791 Head and Valve Holddown Assembly Details

3-Way Ball Valve Assemblies Using TAC DuraDrive Actuators

AIRCRAFT ENGINES SERVICE INSTRUCTION ENGINE START AT LOW TEMPERATURES AT ROTAX SI R1

MISCELLANEOUS INDEX PAGE DATE SERIES DESCRIPTION

4/3, 4/2 and 3/2 explosion-proof solenoid directional valve

JUMO MIDAS S05 OEM pressure transmitter - universal

1318/ V BATTERY SEPARATOR

Transcription:

REVISIONS REV DESCRIPTION CHG.NO. PP'D DTE SENSOR WELD NECK MOUNTING FLNGE & WELD FTG. (FCTORY WELDED) VILBLE IN SME B16.5 RF & RTJ, ND EN 1092-1 RF. REFER TO TBLE 1 ON SHEET 2 OR FOR S ND DIMENSIONS NEW RELESE DSI100288 DRV /24/09 SEE TBLE 1 SHEET 2 OR SW (PIPE) SENSOR FLNGE, TYPE ND RTING TO MTCH MOUNTING FLNGE OPPOSITE SIDE SUPPORT: SOCKETWELD FITTING SHOWN REFER TO SHEET 5 FOR PPLICBLILITY ND OTHER OPTIONS. WLL ID INSTRUMENT CONNECTIONS: SHOWN HERE: REMOTE-MOUNT FOR HORIZONTL LINE WITH 1/2" NPT/SOCKETWELD. (REFER TO SHEET 4 FOR OTHER INSTRUMENT CONNECTION OPTIONS) FLOW FLOW BI-DIRECTIONL SEE SHEETS 2 & W (PIPE) NOTES: MHS 7 ODF (1) 1. ROSEMOUNT INC. CERTIFIES THIS DRWING IS IN CCORDNCE WITH ROSEMOUNT ENGINEERING SPECIFICTIONS & CCURTELY REPRESENTS THE EQUIPMENT FURNISHED. 2. LL ORIENTIONS SHOWN FOR REFERENCE ONLY. FOR CTUL RECOMMENDED LOCTION & ORIENTTION OF SENSORS & INSTRUMENT CONNECTIONS REFER TO INSTLLTION INSTRUCTION MNUL 00809-0100-4809 &/OR QUICK INSTLLTION GUIDE (QIG) 00825-0100-4585.. FIELD WELD. REFER TO INSTLLTION INSTRUCTIONS FOR WELD REQUIREMENTS. 4. MXIMUM PRESSURE: NSI CLSS 2500 (NOT VILBLE WITH LL MTERILS ND OPTIONS) CONSULT PRODUCT DT SHEET FOR DDITIONL INFORMTION. 5. MXIMUM TEMPERTURE: 1200 F (NOT VILBLE WITH LL MTERILS ND OPTIONS) CONSULT PRODUCT DT SHEET FOR DDITIONL INFORMTION. 6. FOR MODEL SELECTIONS, REFER TO ROSEMOUNT PRODUCT DT SHEETS. 7 NNUBR PRIMRY FLOW ELEMENT IS CCURTE ONLY WITH CORRECT D, DRILLED, MOUNTING HOLE. NO TORCH CUT LLOWED. SEE TBLE NO.2 / SHEET 2 FOR 'MHS' DIMENSIONS. 8. SEE SHEETS 2 & TBLES 1 & 2 FOR LL 'NMED' DIMENSIONS. NOTE: UNLESS OTHERWISE SPECIFIED LL INFORMTION IS BOTH (TYP) & GENERL TO STNDRD PRODUCT DESIGN LL PIPE SECTIONS SHOWN FOR REFERENCE ONLY *UNLESS OTHERWISE SPECIFIED DIMENSIONS IN INCHES (MM) *LL DIMENSIONS RE NOMINL ND RE FOR REFERENCE ONLY DR. J.PYLOR 2/4/09 DRWING TGGING SPECILS TYPE I PPROVL M.VINELL /24/09 585 FOR HORIZONTL LINES WITH REMOTE-MOUNT INSTRUMENT CONNECTIONS TITLE C DIMENSIONL DRWING, MODEL 585,FLNGED W/OPPOSITE SIDE SUPPORT SCLE: NONE SHEET 1 OF 6

SENSOR 11 FLNGE TYPE NSI RF NSI RTJ DIN RF PRESSURE CLSS 00# MOUNTING 1-1/2" S80 2500# 1-1/2" XXH 00# 1-1/2" S80 2500# 1-1/2" XXH PN16 PN40 PN100 1-1/2" S80 ODF (1 &/OR 2).88 (98.6) 4.1 (104.9) 4.44 (112.8) 4.94 (125.5) 6.76 (171.7) 6 (10.1) 4.1 (109.5) 4.44 (112.8) 4.94 (125.5) 6.81 (17.0).21 (81.5).88 (98.6) TBLE 1: DIMENSIONL INFORMTION SENSOR 11.69 (17.5).81 (20.6) 1.1 1.50 (8.1) 2.00 (50.8).88 (22.4) 1.00 (25.4) 1.1 1.50 (8.1) 2.06 (52.).71 (18.0) 1.02 (26.0) (REMOTE- 9.7 (246.4) 10.1 (256.5) 11.6 (294.6) 1.9 (5.1) 10.1 (256.5) 10.5 (266.7) 11.6 (294.6) 1 (55.6) 9.1 (21.1) 10.0 (25) (DIRECT- 10.0 (25) 11.0 (279.4) 10.8 (274.) 11.0 (279.4) 9.4 (28.8) 10. (261.6) (FLNGED (WELDED (NPT (OF FTG.S) 5.6 (142) (127) 5.9 (150) 6.6 2.9 (74).1 (79) 1" 000# (155) (168) 7.0 (178) 10.1.6 1-1/2" 8.0 (257) (91) XXH (20).1 (79) (127) 6. (160) 2.9.1 1" 6.6 (74) (79) 000# (155) (168) 7.0 (178) 10..6 1-1/2" 8.0 (262) (91) XXH (20) 4.9 5.9 (125) 2.9.1 1" (150) 5.9 (74) (79) 000# 6.7 (150) (170) SENSOR TBLE 2: SENSOR PROPERTIES SW SENSOR WIDTH MHS ( MOUNTING HOLE) W (WIDTH CCROSS INSTRUMENT CONNECTION) 11.80 (20) 7/8" (22).8 (97) 22 1.20 (0) 1-5/16" (4) 4.1 (104) 44 2.28 (58) 2-1/2" (64) 5. (15) SENSOR 22 FLNGE TYPE NSI RF NSI RTJ DIN RF PRESSURE CLSS 00# MOUNTING 2" S80 2500# " XXH 00# 2" S80 2500# " XXH PN16 PN40 PN100 2" S80 ODF (1 &/OR 2) 4.12 (104.6) 4.8 (111.) 4.75 (120.7) 5.88 (149.4) 9.88 (251.0) 4.1 (109.5) 4.62 (117.) 4.81 (122.2) 5.94 (150.9) 10.00 (25).40 (86.4).51 (89.2) (109.2) TBLE 1: DIMENSIONL INFORMTION SENSOR 22.75 (19.1).88 (22.4) 1.25 (1.8) 1.75 (44.5) 2.88 (7.2).94 (2.9) 1.1 1.1 (.) 1.81 (46.0).00 (76.2).71 (18.0).79 (20.1) 1.10 (27.9) (REMOTE- 10.0 (25) 11.1 (281.9) 12.8 (25.1) 17.9 (454.7) 11.0 (279.4) 11. 12.9 (2) 18.1 (459.7) 9.2 (2.7) 9.4 (28.8) 10.5 (266.7) (DIRECT- 10. (261.6) 11.4 (289.6) (FLNGED (WELDED (NPT (OF FTG.S) 5.8 6.0 (147) (152) (155) 4.5 1-1/2" 6.5 6.9 (102) (114) 000# (165) (175) 8.8 (224) 8.5 (216) 14. 4.1 12.0 2" XXH (6) (104) (05) 6.0 6.7 (152) 11. (170) 4.5 1-1/2" 6.5 11.6 7.1 (102) (114) 000# (165) (294.6) (180) 9.5 (241.) 9.7 (246.4) 10.8 (274.) 8.9 (226) 14.5 (68) (127) 5.2 (12) 6. (160) 4.1 (104) (102) 4.5 (114) 2" XXH 1-1/2" 000# 8.5 (216) 12.0 (05) 6.5 (165) SHEET: 2 of 6

SENSOR 44 FLNGE TYPE NSI RF NSI RTJ DIN RF PRESSURE CLSS 00# 900# 1500# 2500# 00# 900# 1500# 2500# PN16 PN40 PN100 MOUNTING " S40 " S40 " S40 ODF (1 &/OR 2) 4.62 (117.4) 0 (127.0) 5.8 (16.7) 8.19 (208.0) 8.56 (217.4) 11.19 (284.2) 4.81 (122.2) 5.25 (1.4) 5.44 (18.2) 8.25 (209.6) 8.6 (219.2) 11.8 (289.1).84 (97.5) 4.16 (105.7) 4.95 (125.7) TBLE 1: DIMENSIONL INFORMTION SENSOR 44.94 (2.9) 1.1 1.50 (8.1) 2.00 (50.8) 2.8 (60.5).25 (82.6) 1.1 1.8 (5.1) 1.56 (9.6) 2.06 (52.2) 2.44 (62.0).44 (87.4).79 (20.0).95 (2) 1.26 (2.0) (REMOTE- 11. 12.0 (04.8) 15. (88.6) 1 (408.9) 19.6 (497.8) 11.2 (284.5) 11.8 (299.7) 12.2 (09.9) 15.5 (9.7) 16.2 (411.5) 20.0 (508.0) 9.8 (248.9) 10.2 (259.1) 11. (DIRECT- 1.7 (48.0) 14. (6.2) 1 (81.0) 14.2 (60.7) 14.8 (75.9) 15.2 (8) 12.8 (25.1) 1.2 (5.) 14. (6.2) (FLNGED 6.6 (168) 7.1 (WELDED (NPT (OF FTG.S) 7.5 (191) (180).9 8. " S80 7.9 (99) (211) (201) 11.6 11.5 (295) (292) 12.4 12. (15) 6.4 (12) 16.2 (16) 1 (412) (56) 7.0 7.5 (178) (191) 8..9 (211) " S80 8.1 (99) 8. (206) (211) 11.7 11.5 (297) (292) 12.6 12. (20) 6.4 (12) 16.6 (16) 1 (422) (56) 5.6 (142) 7.9.9 (201) " S80 (155) (99) 7.2 9.1 (18) (21) PIPE XIS FLOW HIGH PRESSURE LOW PRESSURE HIGH PRESSURE LOW PRESSURE PIPE XIS FLOW REMOTE-MOUNT HED FOR HORIZONTL LINES REMOTE-MOUNT HED FOR VERTICL LINES SHEET: of 6

7/16 X 2-1/4" LG BOLTS SUPPLIED S STNDRD 8.0 (20).8 (95) DIRECT-MOUNT HED WITH -VLVE OR 5-VLVE MNIFOLD (-VLVE MNIFOLD SHOWN) (CONFIGURTION IDENTICL FOR HORIZONTL ND VERTICL LINES) (VILBLE FOR PRESSURE RTINGS UP TO NSI 600/DIN PN100 ONLY) 12. (12) 6.2 (157) 7/16 X 2-1/4" BOLTS SUPPLIED S STNDRD (128) BI-DIRECTIONL/REDUNDNT DIRECT-MOUNT HED WITHDUL -VLVE MNIFOLD (CONFIGURTION IDENTICL FOR HORIZONTL ND VERTICL LINES) (VILBLE FOR PRESSURE RTINGS UP TO NSI 600/DIN PN100 ONLY) SHEET: 4 of 6

ODF (2) FLNGED OPPOSITE SIDE SUPPORT OPTION (FLNGE, RTING & ODF DIMENSION MTCHES THT OF TOPSIDE MOUNTING) WELD CP THREDED/SOCKET WELD SUPPORT PLUG (SOCKET WELD SHOWN) 000# THREDED/SOCKET WELD BRNCH FITTING BUTTWELD BRNCH FITTING WELDED OPPOSITE SUPPORT DETIL (PPLICBLE TO LL SENSOR 44) (PPLICBLE TO SENSOR 11 ND 22 WITH 2500# RTING) THREDED/SOCKET WELD OPPOSITE SUPPORT DETIL (PPLICBLE TO LL SENSOR 11 & 22 IN PRESSURE CLSS 1500# & UNDER) (NOTE: SOCKET WELD VERSION SHOWN) SHEET: 5 of 6

.1 ( 78.1) 2.6 (6) NNUBR (SHOWN FOR REFERENCE ONLY) 14 (5) B ROSEMOUNT MODEL 78 RTD W/THERMOWELL & CONNECTION HED 1/2" NPT CONDUIT CONNECTION 12.2 (10) /4" 000# SOCKETWELD FITTING (INCLUDED - MTERIL MTCHES MOUNTING MTERIL).6 (16).82 MIN ( 20.8 MIN.) DRILL THRU ONE WLL ONLY FOR TEMP SENSOR (102).75 ( 19) 4 x ID SEPRTION (MINIMUM) TEMP SENSOR DOWNSTREM OF NNUBR B FLOW REMOTE TEMPERTURE SENSOR (VILBLE FOR UP TO 1500# PRESSURE RTING) SHEET: 6 of 6

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback