HYDRAULIC DRY DISC BRAKES PARTS CATALOG
INTRODUCTION AxleTech International is a global manufacturer, and supplier of axles, axle components, planetary axles, brakes, and aftermarket parts for commercial specialty trucks, military vehicles, and off-highway machines used in the construction, material handling, forestry, mining, and agricultural markets. Built on the legacy of Rockwell International, AxleTech products serve in the most demanding applications. It s only fitting then that we offer the service parts and technical support to keep your equipment up and running under all conditions no matter your make of commercial, off-highway or military vehicle. With a global distribution network spanning five continents, AxleTech products and technical support are never out of reach. You can contact our Aftermarket Customer Service in North America at 1-800-540-2794 or AFM.NA@axletech.com and in Europe at +33 477.92.88.44 or AFM.Europe@axletech.com. If additional technical support is required, AxleTech factory personnel are available to address technical issues. You can reach AxleTech Aftermarket Technical Support in North America at 1-800-540-2794 or service.na@axletech.com, and in Europe at +33 477.92.88.33 or service.eu@axletech.com. No matter where you are, the entire AxleTech parts catalog is as close as the nearest computer. OffhighwayPlus (www.offhighwayplus.com) is your online resource for finding and purchasing the parts you need. Registration is required for parts purchases. However, the online catalog is always available for you to find parts and determine pricing. To register for OffhighwayPlus, contact AxleTech at 1-877-547-3907 (ext. 228). 2
TABLE OF CONTENTS HDA476 and HDM476 Brakes (4 pistons)... 5 Brake assemblies and component parts are designed to be directly interchangeable in form, fit, and function with the Goodyear, Rockwell, Meritor, ArvinMeritor and Carlisle SCL-2 Dry Disc Brakes. HDA676 and HDM676 Brakes (6 pistons)... 11 Brake assemblies and component parts are designed to be directly interchangeable in form, fit, and function with the Rockwell, Meritor, ArvinMeritor and Carlisle HDB640 Dry Disc Brakes. Part Number Cross-Reference List... 15 Goodyear, Rockwell, Meritor, ArvinMeritor and Carlisle part number cross-over to AxleTech International part numbers. 3
4
HD476 SERIES HD476 SERIES BRAKE MODEL BRAKE MODEL: HDA476 and HDM476 SPECIFICATIONS: HDA476100 HDM476100 HDA476101 HDM476101 HDA476102 HDM476102 HDA476300 HDM476300 HDA476301 HDM476301 HDA476500 HDA476700 HDM476700 PART NUMBERING LOGIC Other Features M = Mineral Oil A = Automotive DOT-4 Fluid H = Hydraulic D = Disc Brake HDM-476-100 Number of Pistons Exact Spec & Mounting Info 100 = 4 x.875-9 300 = 6 x.750-10 500 = 6 x M20-2.5 700 = 4 x M24-2.0 Piston Diameter (mm) The AxleTech International HD476 Dry Disc Brake Series is designed to be directly interchangeable in form, fit, and function with the Goodyear, Rockwell, Meritor, ArvinMeritor and Carlisle SCL-2 Dry Disc Brakes. Brake assemblies, components, and kits detailed in this document and supplied by AxleTech International, its subsidiaries, and its representatives, have been designed, tested, and verified to be the High Quality, OEM products that our customers require to service their HD476 and SCL-2 Dry Disc Brakes. HDA476100 HDA476300 HDA476500 HDA476700 4 x 0.875-9 6 x 0.750-10 6 x M20-2.5 4 x M24-2.0 Mounting Mounting Mounting Mounting 5
HD476 SERIES AXLETECH SPECIFICATIONS: REPLACES: HDA476100............................. 9650447, SCL2-31-2, and SCL2-31-4 HDM476100............................. SCL2-26-1 and SCL2-31-1 HDA476101 HDM476101............................. SCL2-26-3 and SCL2-31-3 HDA476102............................. 9650414 HDM467102 HDA476300............................. 9650318, SCL2-28-1, and SCL2-30-6 HDM476300............................. 9650252, SCL2-28-2, and SCL2-30-7 HDA476301............................. SCL2-22-15 HDM476301............................. SCL2-22-17 and SCL2-28-5 HDA476500............................. SCL2-30-5 HDA476700 HDM476700 6
HD476 SERIES 326301036E For All HD476100, 101, and 102 Brakes (Replaces 3267R1474 and 3267Y1559) 1 Housing 1 326301034E For All HD476300, and 301 Brakes (Replaces 3267T1554 and 3267V1556) 326301035E For All HD476500 Brakes (Replaces 3267S1449) 326301040E For All HD476700 Brakes 2 Back-Up Ring 4 120501041E For All HD476 and SCL-2 Brakes (Replaces 9630173) 3 Piston O-Ring 4 500001036E 500001035E For All HDA476 and SCL-2 Brakes compatible with Automotive Brake Fluid. (Replaces 9630159) For All HDM476 and SCL-2 Brakes compatible with Petroleum Based Hydraulic Fluids (Mineral Oil). (Replaces 9680595) 4 Wiper Seal 4 500001039E For All HD476 and SCL-2 Brakes (Replaces 1205A2263) 5 Piston 4 223001016E For All HD476 and SCL-2 Brakes (Replaces 9640138) 6 Cap O-Ring 2 500001038E 500001037E For All HDA476 and SCL-2 Brakes compatible with Automotive Brake Fluid. (Replaces 9680381) For All HDM476 and SCL-2 Brakes compatible with Petroleum Based Hydraulic Fluids (Mineral Oil). (Replaces 5X1268) 7 Cap 2 326601390E For All HD476 and SCL-2 Brakes (Replaces 9640105) 8 Cap Plug 2 125001017E For All HD476 and SCL-2 Brakes (Replaces 9680073) 9 Bleeder Screw 2 125001025E 1199K1337Z For HDA476100, 300, 301, 500, and 700 Brakes For HDM476100, 102, 300, 301, and 700 Brakes (Replaces 9680401 and 1199J1336) For HDA476101, 102, and HDM476101 Brakes 10 Bleeder Protector 2 125001029E For All HD476 and SCL-2 Brakes (Replaces 3266U1399) 11 Brake Pad Assy 2 322201017A03 322201017A01 For HDA476100, 301, 500, and 700 Brakes For HDM476100, 101, 301, and 700 Brakes (Replaces A23222X2104, A33222X2104, A63222X2104, and A83222X2104) Lining Mix: AT201 For HDA476101, 102, 300 and HDM476102 and 300 Brakes (Replaces A3222X2104 and A13222X2104) Lining Mix: AT200 12 Pad Retainer Plate 4 220501014E For All HD476 and SCL-2 Brakes (Replaces 2205E1019 and 9630134) 13 Pad Retainer Bolt 8 S21012ZB2 For All HD476 and SCL-2 Brakes 14 Assembly Grease A/R 755001106E For All HD476 and SCL-2 Brakes 7
BRAKE LINING KIT 940001381A01 (For HDA476100, 301, 500, and 700, HDM476100, 101, 301, and 700) 11 Brake Pad Assy 2 322201017A03 Lining Mix: AT201 Replaces 9680436, 2000W1297, 2000U1399, and 2000Y1533 BRAKE LINING KIT 940001246A01 (For HDA476101, 102, and 300, HDM476102, and 300) 11 Brake Pad Assy 2 322201017A01 Lining Mix: AT200 Replaces 2000L1468, 9680668, and KIT10113 Note: The above kits are for all models, specifications, and styles of HD476 and SCL-2 brakes. 8
HD476 SERIES BRAKE SEAL KIT 940001383A01 (For ALL HDA476 BRAKES) 2 Back-Up Ring 4 120501041E 3 Piston O-Ring 4 500001036E 6 Cap O-Ring 2 500001038E Replaces 9680565 BRAKE WIPER AND SEAL KIT 940001382A01 (For ALL HDA476 BRAKES) 2 Back-Up Ring 4 120501041E 3 Piston O-Ring 4 500001036E 4 Wiper Seal 4 500001039E 6 Cap O-Ring 2 500001038E Replaces MPS3716, MPS3949, and 11994196 BRAKE REPAIR KIT 940001385A01 (For HDA476100, 301, 500, and 700) 2 Back-Up Ring 4 120501041E 3 Piston O-Ring 4 500001036E 4 Wiper Seal 4 500001039E 5 Piston 4 223001016E 6 Cap O-Ring 2 500001038E 9 Bleeder Screw 2 125001025E 10 Bleeder Protector 2 125001029E 11 Brake Pad Assy 2 322201017A03 Lining Mix: AT201 Replaces MPS3988 and MPS4063 BRAKE REPAIR KIT 940001384A01 (For HDA476300) 2 Back-Up Ring 4 120501041E 3 Piston O-Ring 4 500001036E 4 Wiper Seal 4 500001039E 5 Piston 4 223001016E 6 Cap O-Ring 2 500001038E 9 Bleeder Screw 2 125001025E 10 Bleeder Protector 2 125001029E 11 Brake Pad Assy 2 322201017A01 Lining Mix: AT200 Replaces MPS3952 Note: The above kits are for all models, specifications, and styles of HDA476 and SCL-2 brakes compatible with Automotive Brake Fluid. The rubber components shown in these kits are only compatible with Automotive (DOT-4) Brake Fluid. Do not use these kits with other types of brake actuation fluids. 9
BRAKE SEAL KIT 940001248A01 (For ALL HDM476 BRAKES) 2 Back-Up Ring 4 120501041E 3 Piston O-Ring 4 500001035E 6 Cap O-Ring 2 500001037E Replaces 9680648 BRAKE WIPER AND SEAL KIT 940001247A01 (For ALL HDM476 BRAKES) 2 Back-Up Ring 4 120501041E 3 Piston O-Ring 4 500001035E 4 Wiper Seal 4 500001039E 6 Cap O-Ring 2 500001037E Replaces MPS3717 and 9680355 BRAKE REPAIR KIT 940001380A01 (For HDM476100, 101, 301, and 700) 2 Back-Up Ring 4 120501041E 3 Piston O-Ring 4 500001035E 4 Wiper Seal 4 500001039E 5 Piston 4 223001016E 6 Cap O-Ring 2 500001037E 9 Bleeder Screw 2 125001025E 10 Bleeder Protector 2 125001029E 11 Brake Pad Assy 2 322201017A03 Lining Mix: AT201 Replaces MPS3987 BRAKE REPAIR KIT 940001390A01 (For HDM476102 and 300) 2 Back-Up Ring 4 120501041E 3 Piston O-Ring 4 500001035E 4 Wiper Seal 4 500001039E 5 Piston 4 223001016E 6 Cap O-Ring 2 500001037E 9 Bleeder Screw 2 125001025E 10 Bleeder Protector 2 125001029E 11 Brake Pad Assy 2 322201017A01 Lining Mix: AT200 Replaces (None) Note: The above kits are for all models, specifications, and styles of HDM476 and SCL-2 brakes compatible with Petroleum Based Hydraulic Fluids (Mineral Oil). The rubber components shown in these kits are only compatible with Petroleum Based Hydraulic Fluids (Mineral Oil). Do not use these kits with other types of brake actuation fluids. 10
HD676 SERIES HD676 SERIES BRAKE MODEL BRAKE MODEL: HDA676 and HDM676 SPECIFICATIONS: HDM676100 PART NUMBERING LOGIC Other Features M = Mineral Oil A = Automotive DOT-4 Fluid H = Hydraulic D = Disc Brake HDM-676-100 Number of Pistons Exact Spec & Mounting Info 100 = 8 x 21mm Piston Diameter (mm) The AxleTech International HD676 Dry Disc Brake Series is designed to be directly interchangeable in form, fit, and function with the Rockwell, Meritor, ArvinMeritor and Carlisle HDB640 Dry Disc Brakes. Brake assemblies, components, and kits detailed in this document and supplied by AxleTech International, its subsidiaries, and its representatives, have been designed, tested, and verified to be the High Quality, OEM products that our customers require to service their HD676 and HDB640 Dry Disc Brakes. HDM676100 8 x 21 mm Mounting 11
HD676 SERIES AXLETECH SPECIFICATIONS: REPLACES: HDM676100............................. HDB64014 12
HD676 SERIES 1 Housing 1 326301029E For HD676100 Brakes (Replaces 3267R1422) 2 Back-Up Ring 6 120501041E For All HD676 and HDB640 Brakes (Replaces 9630173) 3 Piston O-Ring 6 500001036E 500001035E For All HDA676 and HDB640 Brakes compatible with Automotive Brake Fluid (Replaces 9630159) For All HDM676 and HDB640 Brakes compatible with Petroleum Based Hydraulic Fluids (Mineral Oil). (Replaces 9680595 and 5X1242) 4 Wiper Seal 6 500001039E For All HD676 and HDB640 Brakes (Replaces 1205A2263) 5 Piston 6 223001016E For All HD676 and HDB640 Brakes (Replaces 9640138) 6 Cap O-Ring 3 500001038E 500001037E For All HDA676 and HDB640 Brakes compatible with Automotive Brake Fluid (Replaces 9680381) For All HDM676 and HDB640 Brakes compatible with Petroleum Based Hydraulic Fluids (Mineral Oil). (Replaces 5X1268) 7 Cap 3 326601390E For All HD676 and HDB640 Brakes (Replaces 3266L1390 and 3266M1391) 8 Cap Plug 3 125001017E For All HD676 and HDB640 Brakes (Replaces 9680073) 9 Bleeder Screw 3 125001025E For All HD676 and HDB640 Brakes (Replaces 9680401 and 1199J1336) 10 Bleeder Protector 3 125001029E For All HD676 and HDB640 Brakes (Replaces 3266U1399) 11 Brake Pad Assy 2 322201030A01 For All HD676 and HDB640 Brakes (Replaces A43222A2107) Lining Mix: AT202 12 Pad Retainer Plate 4 220501014E For All HD676 and HDB640 Brakes (Replaces 2205E1019) 13 Pad Retainer Bolt 8 S21012ZB2 For All HD676 and HDB640 Brakes 14 Assembly Grease A/R 755001106E For All HD676 and HDB640 Brakes 13
BRAKE LINING KIT 940001386A01 (For HDM676100) 11 Brake Pad Assy 2 322201030A01 Lining Mix: AT202 Replaces (None) Note: The above kit is for all models, specifications, and styles of HD676 and HDB640 brakes. BRAKE SEAL KIT 940001388A01 (For ALL HDM676 BRAKES) 2 Back-Up Ring 6 120501041E 3 Piston O-Ring 6 500001035E 6 Cap O-Ring 3 500001037E Replaces (None) BRAKE WIPER AND SEAL KIT 940001387A01 (For ALL HDM676 BRAKES) 2 Back-Up Ring 6 120501041E 3 Piston O-Ring 6 500001035E 4 Wiper Seal 6 500001039E 6 Cap O-Ring 3 500001037E Replaces 9680597 and MPS3606 BRAKE REPAIR KIT 940001389A01 (For HDM676100) 2 Back-Up Ring 6 120501041E 3 Piston O-Ring 6 500001035E 4 Wiper Seal 6 500001039E 5 Piston 6 223001016E 6 Cap O-Ring 3 500001037E 9 Bleeder Screw 3 125001025E 10 Bleeder Protector 3 125001029E 11 Brake Pad Assy 2 322201030A01 Lining Mix: AT202 Replaces (None) Note: The above kits are for all models, specifications, and styles of HDM676 and HDB640 brakes compatible with Petroleum Based Hydraulic Fluids (Mineral Oil). The rubber components shown in these kits are only compatible with Petroleum Based Hydraulic Fluids (Mineral Oil). Do not use these kits with other types of brake actuation fluids. 14
PART NUMBER CROSS-REFERENCE LIST Goodyear Rockwell Meritor ArvinMeritor Carlisle P/N: AxleTech P/N: Page 9630159 500001036E 7, 13 9630173 120501041E 7, 13 9640105 326601390E 7 9640138 223001016E 7, 13 9650252 HDM476300 6 9650318 HDA476300 6 9650414 HDM476102 6 9650447 HDA476100 6 9680073 125001017E 7, 13 9680355 940001247A01 10 9680381 500001038E 7, 13 9680401 125001025E 7, 13 9680436 940001381A01 8 9680565 940001383A01 9 9680595 500001035E 7, 13 9680597 940001387A01 14 9680648 940001248A01 10 9680668 940001246A01 8 11994196 940001382A01 9 1199J1336 125001025E 7, 13 1199K1337Z 1199K1337Z 7 1205A2263 500001039E 7, 13 2000L1468 940001246A01 8 2000U1399 940001381A01 8 2000W1297 940001381A01 8 2000Y1533 940001381A01 8 2205E1019 220501014E 7, 13 3266L1390 326601390E 13 3266M1391 326601390E 13 3266U1399 125001029E 7, 13 3267R1422 326301029E 13 3267R1474 326301036E 7 3267S1449 326301035E 7 3267T1554 326301034E 7 3267V1556 326301034E 7 Goodyear Rockwell Meritor ArvinMeritor Carlisle P/N: AxleTech P/N: Page 3267Y1559 326301036E 7 5X1242 500001035E 13 5X1268 500001037E 7, 13 A13222X2104 322201017A01 7 A23222X2104 322201017A03 7 A3222X2104 322201017A01 7 A33222X2104 322201017A03 7 A43222A2107 322201030A01 13 A63222X2104 322201017A03 7 A83222X2104 322201017A03 7 HDB64014 HDM676100 12 KIT10113 940001246A01 8 MPS3606 940001387A01 14 MPS3716 940001382A01 9 MPS3717 940001247A01 10 MPS3949 940001382A01 9 MPS3952 940001384A01 9 MPS3987 940001380A01 10 MPS3988 940001385A01 9 MPS4063 940001385A01 9 S21012ZB2 S21012ZB2 7, 13 SCL22215 HDA476301 6 SCL22217 HDM476301 6 SCL2261 HDM476100 6 SCL2263 HDM476101 6 SCL2281 HDA476300 6 SCL2282 HDM476300 6 SCL2285 HDM476301 6 SCL2305 HDA476500 6 SCL2306 HDA476300 6 SCL2307 HDM476300 6 SCL2311 HDM476100 6 SCL2312 HDA476100 6 SCL2313 HDM476101 6 SCL2314 HDA476100 6 15
Locations Manufacturing Facilities Osasco, Brazil Oshkosh, Wisconsin, U.S.A. St. Etienne, France Sales and Service Offices Alcester, UK Ankara, Turkey Bangalore, India Beijing, Chinga Belvidere, Illinois, U.S.A. Chiba, Japan Johannesburg, South Africa Manila, Philippines Osasco, Brazil Seoul, South Korea Singapore St. Etienne, France Sydney, Austrailia Taipei, Taiwan Troy, Michigan, U.S.A. Tokyo, Japan Tunis, Tunisia Manufacturing Facilities Sales and Service Offices OSHKOSH, WISCONSIN CHICAGO, ILLINOIS ALCESTER, UK ST. ETIENNE, FRANCE TROY, MICHIGAN ANKARA, TURKEY DETROIT, MICHIGAN TUNIS, TUNISIA BELVIDERE, ILLINOIS MUMBAI, INDIA SINGAPORE SEOUL, SOUTH KOREA TOKYO, JAPAN CHIBA, JAPAN BEIJING, CHINA TAIPEI, TAIWAN MANILA, PHILIPPINES OSASCO, BRAZIL BOKSBURG, SOUTH AFRICA SYDNEY, AUSTRALIA AxleTech International 1400 Rochester Road Troy, Michigan 48083 USA Tel: 248 658 7200 Fax: 248 658 7344 AxleTech International 1005 High Avenue Oshkosh, Wisconsin 54901 USA Tel: 920 424 5001 Fax: 920 424 5499 AxleTech International France SAS 4, rue Jean Servanton -BP656-42042 Saint-Étienne Cedex 1 France Tel: 33 477 92 88 00 Fax: 33 477 92 88 93 AxleTech International 1020 West 119th Street Chicago, Illinois 60643 USA Tel: 773 821 5450 Fax: 773 821 0345 AxleTech do Brasil Sistemas Automotivos Ltda. Rua Marechal Rondon 840 Centro Osasco SP 06093-010 Brasil Tel: 55 11 3653 1420 Fax: 55 11 3653 1424 www.offhighwayplus.com Copyright AxleTech International 2009 Printed in the USA FCG300130-112409 V1 AxleTech is a trademark of AxleTech International and sells through market-focused companies that are separate legal entities from Goodyear Tire & Rubber Company (who is the owner of the Goodyear mark), Rockwell International, Meritor Technology, Inc. (who is the owner of the Meritor and ArvinMeritor marks) and Motion Control Industries, Inc. (who is the owner of the Carlisle mark). AxleTech traces its heritage back to Rockwell International.