Pricelist 2014 Action Pricelist Mitsubishi / Koning & Hartman Frequency Inverters valid in Belgium from 17/03/2014 till 16/05/2014
Table des matières INTRODUCTIE... 3 FR-D700 SERIES... 4 FR-D720S SINGLE-PHASE COMPACT FREQUENCY INVERTER WITH SAFETY STOP... 4 FR-D720S EMC FILTERS... 5 FR-D700 SERIES... 5 FR-D740 THREE-PHASE COMPACT FREQUENCY INVERTER... 6 FR-D740 EMC FILTERS... 6 FR-F740 SERIES... 7 FR-F700 THREE-PHASE FREQUENCY INVERTER... 9 FR-A740 SERIES... 10 FR-A740 THREE-PHASE FREQUENCY INVERTER... 12 ACCESSORIES... 13 PARAMETER UNITS... 13 FILTER OPTIONS... 13 ACTION TERMS AND CONDITIONS OF SALES... 14 Page: 2
Introduction La fondation de Mitsubishi remonte à 1870. À l'époque, Yataro Iwasaki venait de créer une entreprise de transport maritime à Osaka pour assurer l'exploitation de trois bâtiments à vapeur en location. L'acquisition de sociétés et la création de nouvelles entreprises dans d'autres secteurs d'activité tels que l'industrie minière, la construction navale, le secteur bancaire, le commerce et l'immobilier ont permis à Mitsubishi de devenir, au cours des décennies qui ont suivi, un groupe industriel d'envergure internationale. La création de Mitsubishi Electric Corporation remonte à la scission de la production des groupes électrogènes marinisés intervenue en 1921. À l'heure actuelle, Mitsubishi Electric est représenté dans plus de 120 pays, lesquels accueillent nombre de sites de production, centres F&E et bureaux de vente. Les trois diamants Les trois diamants forment le fameux logo de Mitsubishi Electric et de plus d'une quarantaine d'autres entreprises internationales en activité dans les secteurs de la finance, du commerce et de l'industrie. Le logo est intimement lié au nom de l'entreprise. L'expression Mitsubishi signifie en effet «trois diamants», comme en atteste la combinaison mitsu (= trois) et bishi (= pierre/diamant). Comme le revendique le nom du groupe, les produits et services frappés de ce logo sont synonymes de technologies d'avant-garde et de qualité supérieure. Page: 3
FR-D700 series Simple and safe operability, compact design as well as improved performance features were the focus during the development of the new FR-D700 frequency inverter. A drive was created that set new standards in the field of compact drives. Improved functions and device properties such as simplified cabling thanks to spring clamps, the integrated Digital Dial with LED display, improved performance yield in the low-speed range as well as the integrated emergency stop function make the FR-D700 the new standard in the ultra compact class. The FR-D700 is especially advantageous for standard applications by virtue of its user- friendliness. It is the correct choice in both simple and more sophisticated applications. Typical applications are feeder and conveyor drives, machining tools or gate and door drives. FR-D720S Single-phase Compact frequency inverter with safety stop Articlenr. Type Description MIT247595 FR-D720S-008SC-EC Rated Motor Power: 0,1kW, 0.8A; Input Voltage: 1x200 to 240V; Output Voltage: 3x200 to 240V;Output Frequency: 0,2 to 400Hz; Overload 150% 60s; 200% 0.5s IP20 MIT247596 FR-D720S-014SC-EC Rated Motor Power: 0,2kW, 1.4A; Input Voltage: 1x200 to 240V; Output Voltage: 3x200 to 240V;Output Frequency: 0,2 to 400Hz; Overload 150% 60s; 200% 0.5s IP20 MIT247597 FR-D720S-025SC-EC Rated Motor Power: 0,4kW, 2.5A; Input Voltage: 1x200 to 240V; Output Voltage: 3x200 to 240V;Output Frequency: 0,2 to 400Hz; Overload 150% 60s; 200% 0.5s IP20 MIT247598 FR-D720S-042SC-EC Rated Motor Power: 0,75kW, 4.2A; Input Voltage: 1x200 to 240V; Output Voltage: 3x200 to 240V;Output Frequency: 0,2 to 400Hz; Overload 150% 60s; 200% 0.5s IP20 MIT247599 FR-D720S-070SC-EC Rated Motor Power: 1,5kW, 7A; Input Voltage: 1x200 to 240V; Output Voltage: 3x200 to 240V;Output Frequency: 0,2 to 400Hz; Overload 150% 60s; 200% 0.5s IP20 MIT247600 FR-D720S-0100SC-EC Rated Motor Power: 2,2kW, 10A; Input Voltage: 1x200 to 240V; Output Voltage: 3x200 to 240V;Output Frequency: 0,2 to 400Hz; Overload 150% 60s; 200% 0.5s IP20 82,00 88,00 98,00 114,00 145,00 180,00 Page: 4
FR-D720S EMC Filters Articlenr. Type Description MIT216227 FFR-CS-050-14A-RF1 EMC Filter; FR-D720S-008/014/025/042-EC; Footprint Type 11,00 MIT216228 FFR-CS-080-20A-RF1 EMC Filter; FR-D720S-070-EC; Footprint Type 15,00 MIT216229 FFR-CS-110-26A-RF1 EMC Filter; FR-D720S-100-EC; Footprint Type 20,00 FR-D700 series Simple and safe operability, compact design as well as improved performance features were the focus during the development of the new FR-D700 frequency inverter. A drive was created that set new standards in the field of compact drives. Improved functions and device properties such as simplified cabling thanks to spring clamps, the integrated Digital Dial with LED display, improved performance yield in the low-speed range as well as the integrated emergency stop function make the FR-D700 the new standard in the ultra compact class. The FR-D700 is especially advantageous for standard applications by virtue of its user- friendliness. It is the correct choice in both simple and more sophisticated applications. Typical applications are feeder and conveyor drives, machining tools or gate and door drives. Page: 5
FR-D740 Three-phase Compact frequency inverter Articlenr. Type Description MIT247601 FR-D740-012SC-EC Rated Motor Power: 0,4kW, 1.2A; Input Voltage:3x380 to 480V, Output Voltage: 3x380 to 480V; 0,2 to 400Hz;Output overload 150% 60s; 200% 0.5s, IP20 MIT247602 FR-D740-022SC-EC Rated Motor Power: 0,75kW, 2.2A; Input Voltage:3x380 to 480V, Output Voltage: 3x380 to 480V; 0,2 to 400Hz;Ouput overload 150% 60s; 200% 0.5s, IP20 MIT247603 FR-D740-036SC-EC Rated Motor Power: 1,5kW, 3.6A; Input Voltage:3x380 to 480V, Output Voltage: 3x380 to 480V; 0,2 to 400Hz;Ouput overload 150% 60s; 200% 0.5s, IP20 MIT247604 FR-D740-050SC-EC Rated Motor Power: 2,2kW, 5.0A; Input Voltage:3x380 to 480V, Output Voltage: 3x380 to 480V; 0,2 to 400Hz;Ouput overload 150% 60s; 200% 0.5s, IP20 MIT247605 FR-D740-080SC-EC Rated Motor Power: 3,7kW, 8.0A; Input Voltage:3x380 to 480V, Output Voltage: 3x380 to 480V; 0,2 to 400Hz;Ouput overload 150% 60s; 200% 0.5s, IP20 MIT247606 FR-D740-120SC-EC Rated Motor Power: 5,5kW, 12A; Input Voltage:3x380 to 480V, Output Voltage: 3x380 to 480V; 0,2 to 400Hz;Ouput overload 150% 60s; 200% 0.5s, IP20 MIT247607 FR-D740-160SC-EC Rated Motor Power: 7,5kW, 16A; Input Voltage:3x380 to 480V, Output Voltage: 3x380 to 480V; 0,2 to 400Hz;Ouput overload 150% 60s; 200% 0.5s, IP20 166,00 182,00 212,00 245,00 289,00 354,00 418,00 FR-D740 EMC Filters Articlenr. Type Description MIT215007 FFR-CSH-036-8A-RF1 EMC Filter; FR-D740-012/022/036; Footprint Type 22,00 MIT215008 FFR-CSH-080-16A-RF1 EMC Filter; FR-D740-050/080-EC; Footprint Type 29,00 MIT215005 FFR-MSH-170-30A-RF1 EMC Filter; FR-D740-120/160-EC Footprint Type 34,00 Page: 6
FR-F740 series Today's innovative building services impose a wide variety of demands on drive systems. As a result more planners are now looking for open, flexible and fullyscaleable drives. Additional requirements include user-friendliness, network support and, of course, maximum reliability - particularly in heating, ventilation and air-conditioning (HVAC) applications. The drives must also be economical to use, combining minimum operating costs and maximum energy savings. The frequency inverters of the FR-F700 series are a modern and intelligent drive solution that can easily be integrated into complex modern building services automation systems. The FR-F700 frequency inverter drives are particularly well suited for driving pumps and fans and for applications with reduced overloads, such as air-conditioning systems in building services and industry, ventilation and air extractions systems, drains systems, ground water pumps and heat pumps. The FR-F700 fully supports 2 overload ranges, which makes it very easy to select the right inverter for every application. The FR-F700 is standard parameterized on SLD. Select your inverter type in the overview below: Super low duty (SLD) Low duty (LD) : Mostly used for fans and pumps without polution (HVAC) : Mostly used for pumps with more overload capacity (grey/black water) FR-F700 Capacity (kw) SLD (A) LD (A) FR-F700 Capacity (kw) SLD LD Type number At applied motor (SLD & LD) 110% 60 s 120% 3 s 120% 60 s 150% 3 s 170% 0.5 s Type number At applied motor (SLD/ LD) 110% 60 s 120% 3 s 120% 60 s 150% 3 s 170% 0.5 s 40ºC 50ºC 40ºC 50ºC Page: 7
00023 0.75 2.3A 2.1A 01800 90/ 75 180A 144A 00038 1.5 3.8A 3.5A 02160 110/ 90 216A 180A 00052 2.2 5.2A 4.8A 02600 132/ 110 260A 216A 00083 3.7 8.3A 7.6A 03250 160/ 132 325A 260A 00126 5.5 12.6A 11.5A 03610 185/ 160 361A 325A 00170 7.5 17A 16A 04320 220/ 185 432A 361A 00250 11 25A 23A 04810 250/ 220 481A 432A 00310 15 31A 29A 05470 280/ 250 547A 481A 00380 18.5 38A 35A 06100 315/ 280 610A 547A 00470 22 47A 43A 06830 315/ 355 683A 610A 00620 30 62A 57A 07700 400/ 355 770A 683A 00770 37 77A 70A 08660 450/ 400 866A 770A 00930 45 93A 85A 09620 500/ 450 962A 866A 01160 55 116A 106A 10940 560/ 500 1094A 962A 12120 630/ 560 1212A 1094A Page: 8
FR-F700 Three-phase frequency inverter Voltage range 380-480V (-15% / +10%), Output Frequency: 0.5 to 400Hz Overload in super low duty (SLD) 110% of rated current 60s, 120% of rated current 3s, IP20 Starting torque 120% (at 3Hz) when Simple magnetic flux vector control and slip compensation are set Articlenr. Type Description MIT156569 FR-F740-00023-EC Rated Motor Power in SLD 0.75kW/2.3A, incl. EMC filter, IP20 279,00 MIT156570 FR-F740-00038-EC Rated Motor Power in SLD 1.5kW/3.8A, incl. EMC filter, IP20 288,00 MIT156571 FR-F740-00052-EC Rated Motor Power in SLD 2.2kW/5.2A, incl. EMC filter, IP20 303,00 MIT156572 FR-F740-00083-EC Rated Motor Power in SLD 3.7kW/8.3A, incl. EMC filter, IP20 343,00 MIT156573 FR-F740-00126-EC Rated Motor Power in SLD 5.5kW/12.6A, incl. EMC filter, IP20 413,00 MIT156594 FR-F740-00170-EC Rated Motor Power in SLD 7.5kW/17.0A, incl. EMC filter, IP20 483,00 MIT156595 FR-F740-00250-EC Rated Motor Power in SLD 11kW/15A, incl. EMC filter, IP20 610,00 MIT156596 FR-F740-00310-EC Rated Motor Power in SLD 15kW/31A, incl. EMC filter, IP20 796,00 MIT156597 FR-F740-00380-EC Rated Motor Power in SLD 18.5kW/38A, incl. EMC filter, IP20 1.046,00 MIT156598 FR-F740-00470-EC Rated Motor Power in SLD 22kW/47A, incl. EMC filter, IP20 1.378,00 Page: 9
FR-A740 series The new FR-A700 frequency inverters combine innovative functions and reliable technology with maximum power, economy and flexibility. The FR-A700 is particularly well suited for applications like cranes and lifting gear, extruders, centrifuges and winding machines. Precision without encoders Ultra-precise speed and torque Autotuning Network capabilities Self-diagnostics prevent downtime Comprehensive PLC expertise User-friendly operation The FR-A700 fully supports 4 overloadranges, which makes it very easy to select the right inverter for every application. The FR-A700 is standard parameterized in ND. Every FR-A700 inverter can be adjusted in the overload duty select your inverter type in the overview below: super low duty, low duty, normal duty (factory setting) or heavy duty: FR-A700 Capacity (kw) SLD (A) LD (A) ND (A) HD (A) Type number Power at applied motor (ND) 110% 60S 120% 3S 120% 60S 150% 3S 150% 60S 200% 3S 200% 60S 250% 3S 170% 0.5 S 230% 0.5 S 280% 0.5 S 00023 0.4 2.3 2.1 1.5 0.8 00038 0.75 3.8 3.5 2.5 1.5 00052 1.5 5.2 4.8 4.0 2.5 00083 2.2 8.3 7.6 6.0 4.0 00126 3.7 12.6 11.5 9.0 6.0 00170 5.5 17 16 12 9.0 00250 7.5 25 23 17 12 Page: 10
00310 11 31 29 23 17 00380 15 38 35 31 23 00470 18.5 47 43 38 31 00620 22 62 57 43 38 00770 30 77 70 57 43 00930 37 93 85 71 57 01160 45 116 106 86 71 01800 55 180 144 110 86 02160 75 216 180 144 110 02600 90 260 216 180 144 03250 110 325 260 216 180 03610 132 361 325 260 216 04320 160 432 361 325 260 04810 185 481 432 361 325 05470 220 547 481 432 361 06100 250 610 547 481 432 06830 280 683 610 547 481 07700 315 770 683 610 547 08660 355 866 770 683 610 09620 400 962 866 770 683 10940 450 1094 962 866 770 12120 500 1212 1094 962 866 Page: 11
FR-A740 Three-phase frequency inverter Voltage range 380-480V (-15% / +10%), Output Frequency: 0.2 to 400Hz Overload in normal duty (ND) 150% of rated current 60s, 200% of rated current 3s, IP20 Starting torque 200% 0.3Hz (0.4K to 3.7K), 150% 0.3Hz (5.5K or more) (under real sensorless vector control or vector control) Articlenr. Type Description Net Price MIT169826 FR-A740-00023-EC Rated Motor Power in ND 0.4kW/1.5A, incl. EMC filter, IP20 346,00 MIT169797 FR-A740-00038-EC Rated Motor Power in ND 0.75kW/2.5A, incl. EMC filter, IP20 360,00 MIT169798 FR-A740-00052-EC Rated Motor Power in ND 1.5W/4A, incl. EMC filter, IP20 378,00 MIT169799 FR-A740-00083-EC Rated Motor Power in ND 2.2kW/6A, incl. EMC filter, IP20 436,00 MIT169800 FR-A740-00126-EC Rated Motor Power in ND 3.7kW/9A, incl. EMC filter, IP20 517,00 MIT169801 FR-A740-00170-EC Rated Motor Power in ND 5.5kW/12A, incl. EMC filter, IP20 610,00 MIT169802 FR-A740-00250-EC Rated Motor Power in ND 7.5kW/17A, incl. EMC filter, IP20 773,00 MIT169803 FR-A740-00310-EC Rated Motor Power in ND 11kW/23A, incl. EMC filter, IP20 1.006,00 MIT169804 FR-A740-00380-EC Rated Motor Power in ND 15kW/31A, incl. EMC filter, IP20 1.330,00 MIT169805 FR-A740-00470-EC Rated Motor Power in ND 18.5kW/38A, incl. EMC filter, IP20 1.714,00 Page: 12
Accessories Parameter units All Mitsubishi Electric frequency inverters are standard equiped with a build in parameter unit. In some cases it can be very usefull to have more information on a more advanced parameter unit or to have the parameter unit extended to the outside of the electrical cabinet. The parameter units on the FR-D700 and FR-E700 are fully integrated and cannot be removed an extra parameter unit can be installed to operate the frequency inverter whithout opening the cabinet. The parameter units on the FR-A700 and FR-F700 can be removed or extended via a standard Ethernet cable (RJ45) and a FR-ADP genger changer MIT166134 FR-PU07 LCD programming panel (alphanumerical) for all 700 series MIT70728 FR-A5CBL 2,5 Cable for connecting inverter and programming panel, Length: 2,5 m Filter Options Noise filters (Env. 1) for FR-A740/F740-00023 to FR-A/F740-01800 (The filters are optional, the FR-A740/F740-00023 to FR-A740/F740-01800 are standard equiped with a Env. 2 filter) Articlenr. Type Description MIT193677 FFR-BS-00126-18A-SF100 EMC Filter; FR-A&F740-00023 to 00126-EC 42,00 MIT193678 FFR-BS-00250-30A-SF100 EMC Filter; FR-A&F740-00170 to 00250-EC 57,00 MIT193679 FFR-BS-00380-55A-SF100 EMC Filter; FR-A&F740-00310 to 00380-EC 73,00 MIT193680 FFR-BS-00620-75A-SF100 EMC Filter; FR-A&F740-00470 to 00620-EC 119,00 Page: 13
Action terms and conditions of sales Special Action conditions (only valid at Koning & Hartman Belgium) : th and May 16 th 2014. For further information about this special offer please contact us. Referring to the GENERAL TERMS AND CONDITIONS OF SALE of Koning & Hartman B.V. having its registered premises at Amsterdam Chamber of Commerce and Industry of Amsterdam, Register of Business Names 34.222.312, we ask you attention for the following points: Prices information and prices in this price list without foregoing notice. ight to change the Transport costs On every separate delivery the Payment Net, 30 days from date of invoice. Additional order charge On every order with a ne charged. Rush order 12.00 a.m.) Return shipments Are only accepted with an RMA-number and our order and invoice number after consult and approval by Koning & Hartman. cover the administration costs, bookkeeping and warehouse handling. Page: 14