ENGINEERING DATA High Speed, High Pressure Vane Motors M - Motors 25M, 35M, 45M, 5M w w w. F l u i D y n e F P. c o m E m a i l : c s @ F l u i D y n e F P. c o m
Dependable Versatile The M Motor is a proven design that has been operating in the field for decades. They are available with either standard or heavy duty bearings. This motor design can operate at as low as 1 rpm to as high as 3, rpm at maximum pressures. It can run at faster speeds as system pressures decrease. These motors start out with high efficiencies, and operates at those levels throughout the life of the motor. This is inherent in this vane motor design. Because both ports can be pressurized at the same time, the M-Motor is perfect for multiple motors connected in series. The bi-rotational design of these motors lends itself to quick reversal motion. They can be stalled at as high as 65% of maximum pressure rating at 12r/min without damage. The heavy duty bearing allows for indirect drive options such as gears, belts and pulleys. Several port position configurations are available. Serviceable The internal rotating parts are self contained in a cartridge kit in this design. This makes this motor easily field serviceable. In most cases the motor can stay in place while the ring, rotor, and vanes are replaced with new. Port orientation adjustments too can be done in the field. Model Codes 25 M 65 A 1 1 2 4 Series 25M 35M 45M 5M 26M 36M 46M 51M 2 3 5 6 2 7 *** 8 Mounting Flange & Port Connections A SAE type 2-bolt mounting flange and SAE 4-bolt flange connections 4 Standard Po bearing and Heavy duty bearing Vane Motor Ring Size - Nom. Torque Rating (lb. in./1 psi) 25M 42, 55 & 65 35M 8, 95 & 115 45M 13, 155 & 185 5M 22, 255 & 3 3 11 C 8 114 124 Special Features Suffix *5M only * See speci cation notes for max pressures, etc. Shaft 1 Straight keyed (Optional) 11 Splined (STD) 5 Cover Position (Viewing cover end) A Cover port opposite body port B Cover port 9 CCW from body port C Port connections in line D Cover port 9 CW from body port 6 7 Design 2-29 Email: cs@fluidynefp. com www. FluiDyneFP. com 2
Physical Specifications M odel S eries M ounting Std S haft S plined Optional S haft K eyed A pprox W eight kg (lb) 25M SAE B 2 Bolt 7/8-13 Tooth 7/8 X.187 Key 18 (4) 35M SAE C 2 Bolt 1 1/4-14 Tooth 1 1/4 X.312 Key 29 (64) 45M SAE C 2 Bolt 1 1/4-14 Tooth 1 1/4 X.312 Key 39 (85) 5M SAE D 2 Bolt 1 3/4-13 Tooth 1 3/4 x.437 Key 73 (16) Performance Specifications Model Se ries Torque N m /6,9 bar (lb. in./ 1psi) Dis placem ent cm 3 /r (in 3 /r) Flow Input @ 12 r/min L/m in (U S gpm ) M ax. T orque N m (lb. in.) @ M ax. Pressure M axim um S peeds & Pressure 25M 35M 45M 5M 4,7 (42) 43,9 (2.68) 52,7 (13.9) 115,8 (125) 6,2 (55) 57,7 (3.52) 69,4 (18.3) 151,4 (134) 7,3 (65) 68,7 (4.19) 82,6 (21.8) 18,8 (16) 9, (8) 83,6 (5.1) 1,4 (26.5) 221,5 (196) 1,7 (95) 1,3 (6.12) 12,5 (31.8) 264,4 (234) 13, (115) 121,9 (7.44) 146,3 (38.6) 32,9 (284) 14,7 (13) 138, (8.42) 165,6 (43.7) 361,6 (32) 17,5 (155) 163,2 (9.96) 195,9 (51.7) 429,4 (38) 2,9 (185) 193,2 (11.79) 232,3 (61.3) 52,9 (445) 24,9 (22) 28,8 (255) 33,9 (3) 231,3 (14.11) 277,8 (73.3) 268,2 (16.36) 322,2 (85.) 317,2 (19.35) 38,7 (1.5) 615,9 (545) 717,6 (635) 844,1 (747) 36 r/min @ 34 bar (5 psi) 4 r/min @ 34 bar (5 psi) 26 r/min @ 155 bar (225 psi) 3 r/min @ 172 bar (25 psi) 28 r/min @ 34 bar (5 psi) 32 r/min @ 34 bar (5 psi) 22 r/min @ 155 bar (225 psi) 24 r/min @ 172 bar (25 psi) Continuous operation Intermittent operation: 1% of total operating time; each application of pressure and/or speed not to exceed 6 seconds 114 model su x: 25 psi, counterclockwise; 225 psi, clockwise. (Rotation viewed from shaft end) 124 model su x: 25 psi, bi-directional rotation FluiDyne Fluid Power 3 Email: cs@ FluiDyneFP. com www. FluiDyneFP. com
Installation Dimensions 25M Motors Port connection pads are for use with SAE 4-bolt flanges. Fluid supply to connection L turns shaft clockwise as viewed from shaft end. Fluid supply to connection K turns shaft counterclockwise. CONNECTION K Ø 31.75 (1.25) PORT CONNECTION L Ø 31.75 (1.25) PORT 12,7.5) Ø 11,6/11,55 (4./3.998) #11 SHAFT SAE INVOLUTE SPLINE DATA FLAT ROOT MAJOR DIA FIT 16/32 DIAMETRAL PITCH 13 TEETH 3 PRESSURE ANGLE.749 T.I.F. DIA.8125 PITCH DIA.4375 14 UNC-2B THD 19,1 (.75) DEEP 8 HOLES 1/4NPT 18 THD DRAIN CONNECTION DO NOT RESTRICT 9,65/9,14 (.38/.36) CLOCKWISE ROTATION 117,3(4.62) C 58,7 (2.31) 76,2 (3.) 182,4 (7.18) 148,82 (5.86) 39,15 (1.54 ) 1,5 (.6) 13,5 (.53) 44,5 (1.75) 33,3 (1.31) Ø 146,1 (5.75) Ø 12,7 (4.75) 174,8 (6.88) B D 134,9 (5.31) Ø 27,8 (1.9) A Ø 14,2 (.56) THRU 2 HOLES 22,17/22,15 (.873/.872) MAJOR Ø 18,16 (.715) MIN MINOR Ø 35M Motors Port connection pads are for use with SAE 4-bolt flanges. Fluid supply to connection L turns shaft clockwise as viewed from shaft end. Fluid supply to connection K turns shaft counterclockwise. B 3/8NPT 18 THD DRAIN CONNECTION DO NOT RESTRICT 139,7 (5.5) C A 69,9 (2.75) 88,9 (3.5) D 158,8 (6.25) CONNECTION K Ø 38,1 (1.5) PORT 211,1 (8.31) 17,7 (6.72) 48,3 (1.9 ) CONNECTION L Ø 38,1 (1.5) PORT 15,7 (.62) 12,7/12,2 (.5/.48) 1,5 (.6) 9,7 (.38).5 13 UNC-2B THD 22,2 (.875) DEEP 8 HOLES Ø 127,/126,95 (5./4.998) 62, (2.44) 47,6 (1.875) Ø 35,1 (1.38) Ø 181,1 (7.13) 5.81 DIA. Ø 17,5 (.688) THRU 2 HOLES 31,7/31,67 (1.248/1.247) MAJOR Ø #11 SHAFT SAE INVOLUTE SPLINE DATA FLAT ROOT MAJOR DIA FIT 12/24 DIAMETRAL PITCH 14 TEETH 3 PRESSURE ANGLE 1.82 T.I.F. DIA 1.1667 PITCH DIA CLOCKWISE ROTATION 8.38 26,42 (1.4) MIN MINOR Ø 4 Email: cs@ FluiDyneFP. com www. FluiDyneFP. com
Installation Dimensions 45M Motors Port connection pads are for use with SAE 4-bolt flanges. Fluid supply to connection L turns shaft clockwise as viewed from shaft end. Fluid supply to connection K turns shaft counterclockwise. CONNECTION K Ø 5,8 (2.) PORT CONNECTION L Ø 5,8 (2.) PORT Ø 127,/126,95 (5./4.998) #11 SHAFT SAE INVOLUTE SPLINE DATA FLAT ROOT MAJOR DIA FIT 12/24 DIAMETRAL PITCH 14 TEETH 3 PRESSURE ANGLE 1.822 T.I.F. DIA 1.1667 PITCH DIA.5 13 UNC 28 THD 22,2 (.875) DEEP 8 HOLES 1/2 NPT 14 THD DRAIN CONNECTION DO NOT RESTRICT B 158,8 (6.25) 79.2 (3.12) C 93,5 (3.68) D 15,7 (.62) 12,7/12,2 (.5/.48) 249,2 (9.81) 197,9 (7.79) 62, (2.44) 52,8 (2.8) 47,8 (1.88) 1,5 (.6) 9,7 (.38) Ø 181,1 (7.13) CLOCKWISE ROTATION 212,9 (8.38) Ø147,6 (5.81) 173, (6.81) Ø39,6 (1.56) A Ø17,5 (.688) THRU 2 HOLES 31,7/31,67 (1.248/1.247) MAJOR Ø 26,42 (1.4) MIN MINOR Ø 5M Motors Port connection pads are for use with SAE 4-bolt flanges. CONNECTION K Ø 63,5 (2.5) PORT FLUID SUPPLY TO CONNECTION K TURNS SHAFT COUNTERCLOCKWISE CONNECTION L Ø 63,5 (2.5) PORT FLUID SUPPLY TO CONNECTION L TURNS SHAFT CLOCKWISE.5 13 UNC 2B THD 1.19 DEEP 8 HOLES Fluid supply to connection L turns shaft clockwise as viewed from shaft end. Fluid supply to connection K turns shaft counterclockwise. Ø11,6 (4.) Ø152,4/152,35 (6./5.998) B 196,9 (7.75) C 98,6 (3.88) 12,7 (4.75) D 1/2 NPT 14 THD DRAIN CONNECTION DO NOT RESTRICT 294,9 (11.61) 22,4(.88) 231,9 (9.13) 69,9 (2.75) 12,7/12,2 (.5/.48) 74,4 (2.93) 6,35 (.25) 66,8 (2.63) #11 SHAFT SAE INVOLUTE SPLINE DATA FLAT ROOT SIDE DIA FIT 8/16 DIAMETRAL PITCH 13 TEETH 3 PRESSURE ANGLE 1.51 T.I.F. DIA 1.625 PITCH DIA Ø2,2 (7.88) Ø 47,5 (1.87) Ø 228,6 (9.) CLOCKWISE ROTATION 266,7 (1.5) A 219,7 (8.65) 1,5 (.6) REF Ø 36,6 (1.44) Ø 2,6 (.81) THRU 2 HOLES 43,71/43,56 (1.721/1.715) MAJOR Ø 36,63 (1.442) MIN MINOR Ø FluiDyne Fluid Power 5
Optional Shafts 25M No. 1 straight keyed shaft 35M & 45M No. 1 straight keyed shaft 58,7 (2.31) 47,8 (1.88) 1,5 (.6) REF 31,8 (1.25) 4,75 (.187) KEY 28,4 (1.12) 7,92 (.312) KEY 35,18/34,93 (1.385/1.375) Ø27,8 (1.93) 24,46/24,31 (.963/.957) Ø22,23/22,2 (.875/.874) Ø 35,1 (1.38) 47,8 (1.88) 1,5 (.6) REF 62, (2.44) Ø 35,18/34,93 (1.25/1.248) 5M No. 1 straight keyed shaft 11,1 (.437) KEY 5,8 (2.) 49,38/49,12 (1.944/1.934) Ø47,5 (1.87) Ø44,45/44,42 (1.75/1.749) 66,8 (2.63) 1,5 (.6) REF 74,4 (2.93) 6
Typical Performance 25M Motors Performance Constants: Oil SAE 1W, viscosity 32 cst (15 SUS) @ 38 C (1 F) 42 LB. IN. MODEL 55 LB. IN. MODEL 265 (7) 265 (7) 227 (6) 189 (5) 151 (4) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 265 (7) 227 (6) 227 (6) 189 (5) 151 (4) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 265 (7) 227 (6) 114 (3) 189 (5) 114 (3) 189 (5) 76 (2) 151 (4) 76 (2) 151 (4) 38 (1) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 114 (3) 76 (2) 38 (1) 38 (1) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 114 (3) 76 (2) 38 (1) 158,2 (14) 52,2 (7) 135,6 (12) 113, (1) 9,4 (8) 67,8 (6) 45,2 (4) 22,6 (2) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 8 16 24 32 4 37,3 (5) 29,8 (4) 22,4 (3) 14,9 (2) 7,5 (1) 135,6 (12) 113, (1) 9,4 (8) 67,8 (6) 45,2 (4) 22,6 (2) 65 LB. IN. MODEL 175BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 8 16 24 32 4 44,7 (6) 37,3 (5) 29,8 (4) 22,4 (3) 14,9 (2) 7,5 (1) 265 (7) 227 (6) 189 (5) 151 (4) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 33 (8) 265 (7) 227 (6) 114 (3) 76 (2) 38 (1) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 189 (5) 151 (4) 114 (3) 76 (2) 38 (1) (16) Torque Nm (lb.in.) 158,2 (14) 135,6 (12) 113, (1) 9,4 (8) 67,8 (6) 45,2 (4) 22,6 (2) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 52,2 (7) 44,7 (6) 37,3 (5) 29,8 (4) 22,4 (3) 14,9 (2) 7,5 (1) FluiDyne Fluid Power 8 16 24 32 4 7
Typical Performance 35M Motors Performance Constants: Oil SAE 1W, viscosity 32 cst (15 SUS) @ 38 C (1 F) 8 LB. IN. MODEL 95 LB. IN. MODEL 379 (1) 33 (8) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 454 (12) 379 (1) 33 (8) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 454 (12) 227 (6) 379 (1) 227 (6) 379 (1) 151 (4) 33 (8) 151 (4) 33 (8) 76 (2) 227 (6) 76 (2) 227 (6) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 151 (4) 76 (2) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 151 (4) 76 (2) 271,2 (24) 89,5 (12) Torque Nm (lb.in) 226, (2) 18,8 (16) 135,6 (12) 9,4 (8) 45,2 (4) 175 BAR (25 PSI) 14 BAR (2 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 74,6 (1) 59,7 (8) 44,7 (6) 29,8 (4) 14,9 (2) 226, (2) 18,8 (16) 135,6 (12) 9,4 (8) 45,2 (4) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) (5 PSI) 74,6 (1) 59,7 (8) 44,7 (6) 29,8 (4) 14,9 (2) 8 16 24 32 4 53 (14) 454 (12) 379 (1) 33 (8) 227 (6) 151 (4) 76 (2) 316,4 (28) 271,2 (24) 115LB. IN. MODEL (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 175 BAR (25 PSI) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 8 16 24 32 4 SPEED r/min 53 (14) 454 (12) 379 (1) 33 (8) 227 (6) 151 (4) 76 (2) 14,4 (14) 89,5 (12) 226, (2) 18,8 (16) 135,6 (12) 9,4 (8) 45,2 (4) 14 BAR (2 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 74,6 (1) 59,7 (8) 44,7 (6) 29,8 (4) 14,9 (2) 8 16 24 32 4 8
Typical Performance 45M Motors Performance Constants: Oil SAE 1W, viscosity 32 cst (15 SUS) @ 38 C (1 F) 568 (15) 53 (14) 492 (13) 13 LB. IN. MODEL (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 568 (15) 681 (18) 644 (17) 66 (16) 155 LB. IN. MODEL (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 681 (18) 454 (12) 53 (14) 568 (15) 644 (17) 416 (11) 492 (13) 53 (14) 66 (16) 379 (1) 341 (9) 33 (8) 265 (7) 227 (6) 189 (5) 151 (4) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 454 (12) o 416 (11) 379 (1) 341 (9) 33 (8) 265 (7) 227 (6) 492 (13) 454 (12) o 416 (11) 379 (1) 341 (9) 33 (8) 265 (7) 227 (6) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 568 (15) 53 (14) 492 (13) 454 (12) 416 (11) 379 (1) 341 (9) 33 (8) 114 (3) 189 (5) 189 (5) 265 (7) 76 (2) 151 (4) 151 (4) 227 (6) 38 (1) 114 (3) 114 (3) 189 (5) 76 (2) 76 (2) 151 (4) 119,3 (16) 38 (1) 38 (1) 114 (3) 339, (3) 271,2 (24) 23,4 (18) 135,6 (12) 67,8 (6) 14,4 (14) 89,5 (12) 172 BAR (25 PSI) 74,6 (1) 138 BAR (2 PSI) 59,7 (8) 44,7 (6) 69 BAR (1 PSI) 29,8 (4) 34 BAR (5 PSI) 14,9 (2) 8 16 24 32 4 SPEED RPM 474,5 (42) 46,7 (36) 339, (3) 271,2 (24) 23,4 (18) 135,6 (12) 67,8 (6) 134,2 (18) 119,3 (16) 14,4 (14) 89,5 (12) 74,6 (1) 59,7 (8) 44,7 (6) 29,8 (4) 14,9 (2) 172 BAR (25 PSI) 34 BAR (5 PSI) 138 BAR (2 PSI) 69 BAR (1 PSI) 76 (2) 38 (1) 8 16 24 32 4 SPEED r/min FluiDyne Fluid Power 9
Typical Performance 45M Motors Performance Constants: Oil SAE 1W, viscosity 32 cst (15 SUS) @ 38 C (1 F) 795 (21) 757 (2) 719 (19) 681 (18) 644 (17) 66 (16) 568 (15) 53 (14) 492 (13) 454 (12) 416 (11) 379 (1) 341 (9) 33 (8) 265 (7) 227 (6) 189 (5) 151 (4) 114 (3) 76 (2) 38 (1) 164, (22) 149,1 (2) 185 LB. IN. MODEL (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 795 (21) 757 (2) 719 (19) 681 (18) 644 (17) 66 (16) 568 (15) 53 (14) 492 (13) 454 (12) 416 (11) 379 (1) 341 (9) 33 (8) 265 (7) 227 (6) 189 (5) 151 (4) 114 (3) 76 (2) 38 (1) 134,2 (18) 172 BAR (25 PSI) 542,3 (48) 119,3 (16) Torque Nm (lb.in) 474,5 (42) 46,7 (36) 339, (3) 271,2 (24) 23,4 (18) 135,6 (12) 14,4 (14) 89,5 (12) 74,6 (1) 59,7 (8) 44,7 (6) 29,8 (4) 34 BAR (5 PSI) 138 BAR (2 PSI) 69 BAR (1 PSI) 67,8 (6) 14,9 (2) 8 16 24 32 4 1
Typical Performance 5M Motors Performance Constants: Oil SAE 1W, viscosity 32 cst (15 SUS) @ 38 C (1 F) 833(22) 757 (2) 681 (18) 22 LB. IN. MODEL (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 833 (22) 99 (24) 833 (22) 757 (2) 255 LB. IN. MODEL (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 99 (24) 66 (16) 757 (2) 681 (18) 833 (22) 53 (14) 681 (18) 66 (16) 757 (2) 454 (12) 66 (16) 53 (14) 681 (18) 379 (1) 53 (14) 454 (12) 66 (16) 33 (8) 454 (12) 379 (1) 53 (14) 227 (6) 151 (4) 76 (2) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 379 (1) 33 (8) 227 (6) 33 (8) 227 (6) 151 (4) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 454 (12) 379 (1) 33 (8) 151 (4) 76 (2) 227 (6) 76 (2) 151 (4) 76 (2) 677,9 (6) 179, (24) 79,9 (7) 564,9 (5) 172 BAR (25 PSI) 149,1 (2) 677,9 (6) 172 BAR (25 PSI) 179, (24) 451,9 (4) 339, (3) 226, (2) 113, (1) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 8 16 24 32 119,3 (16) 89,5 (12) 59,7 (8) 29,8 (4) 564,9 (5) 451,9 (4) 339, (3) 226, (2) 113, (1) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 149,1 (2) 119,3 (16) 89,5 (12) 59,7 (8) 29,8 (4) 8 16 24 32 SPEED r/min FluiDyne Fluid Power 11
Typical Performance 5M Motors Performance Constants: Oil SAE 1W, viscosity 32 cst (15 SUS) @ 38 C (1 F) 16(28) 984 (26) 99 (24) 3 LB. IN. MODEL (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 16 (28) 833 (22) 984 (26) 757 (2) 99 (24) 681 (18) 833 (22) 66 (16) 757 (2) 53 (14) 681 (18) 454 (12) 66 (16) 379 (1) 53 (14) 33 (8) 227 (6) 151 (4) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 454 (12) 379 (1) 33 (8) 76 (2) 227 (6) 151 (4) 76 (2) 93,9 (8) 79,9 (7) 677,9 (6) 564,9 (5) 451,9 (4) 339, (3) 226, (2) 113, (1) 172 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 28,8 (28) 179, (24) 149,1 (2) 119,3 (16) 89,5 (12) 59,7 (8) 29,8 (4) 8 16 24 32 31915 Groesbeck Highway Fraser, Michigan 4826 PH: 1-586-296-72 FAX: 1-586-296-721 Email: sales@fluidynefp.com www.fluidynefp.com FluiDyne Contact Info and Website 1/215