Basic capacity 0,000 lbs. G.V.W.R., 800 lbs. tongue load The Model 0 is demountable when installed with mounting channel for width tongue or may be welded for permanent installation. This actuator is available with ball couplers, lunette eye, and adjustable clevis hitch. Usage suggested for recreational and light industrial trailers towed by passenger cars and light trucks. ZINC PLATED (MARINE) MODELS AVAILABLE FOR GREATER CORROSION RESISTANCE. Model 0 Actuator with Leveler Channel 4 404600 Drum STD 45 5 744 087 Leveler Channel Only 607900 Drum STD 54 5 744 087 8979 Clevis Hitch 890900 Drum STD 57 5 744 087 8487 880 5 6 CPLR 8900 Drum STD 57 5 744 087 67 Lunette Eye Model 0 Actuator with Leveler Channel and Mounting Channel For Width Tongue 4800 Drum *NON-STD 60 5 744 087 8487 5 6 CPLR 48500 4809800 Drum *NON-STD 6 5 744 087 With Lunette Eye 4800 4809700 Drum *NON-STD 49 5 744 087 Leveler 4809900 Disc *NON-STD 49 5 4747 47495-004 Act w/leveler 480000 Disc *NON-STD 6 5 4747 47495-004 With Lunette Eye *Non-Standard Actuators require minimum 8-week lead time and minimum order Model 0 Actuator with -5/6 Drop Coupler Less Channel 7500 Drum STD 5 5 744 087 8487 5 6 CPLR Weld-On 8
Model 0 Actuator - Straight -5/6 Ball Coupler Less Channel 607500 Drum STD 50 8 744 087 8487 5 6 CPLR Weld-On 4749600 Disc STD 50 8 4747 47495-00 5 6 CPLR Weld-On Model 0 Actuator - Straight with Lunette Eye Less Channel 607700 Drum **NON-STD 54 8 744 087 L-Eye Weld-On *664500 Drum **NON-STD 58 5 744 087 L-Eye Bolt-On *With mounting channel for width tongue. **Non-Standard Actuators require minimum 8-week lead time and minimum order Model 0 Actuator less Coupler and Channel 608000 Drum STD 4 0 744 087 Weld-On Model 0 Actuator - Straight less Coupler, with Mounting Channel for Width Tongue 664900 Drum *NON-STD 45 5 744 087 Bolt-On *Non-Standard Actuators require minimum 8-week lead time and minimum order 9
Model 0 Actuator - Straight with -5/6 Ball Coupler and Mounting Channel for Width Tongue 477600 Drum STD 54 5 744 087 8487 5 6 CPLR Bolt-On 66400 Drum *NON-STD 54 5 744 087 8487 5 6 CPLR Bolt-On 4750800 Disc STD 54 5 4747 47495-004 8487 5 6 CPLR Bolt-On *Non-Standard Actuators require minimum 8-week lead time and minimum order quantity may be required. Model 0 Actuator - -5/6 Ball Drop Coupler and Mounting Channel for Width Tongue 47800 Drum STD 57 5 744 087 8487 5 6 CPLR Bolt-On 4750600 Disc STD 57 5 4747 47495-004 5 6 CPLR Bolt-On 77700 Drum STD 56 5 744 087 8487 5 6 CPLR Bolt-On *Use 5 8 Mounting Bolt. NOTE: Padlock (Master Lock #0) works with a 5 6 Ball Coupler. 0
MODEL 0 ACTUATOR PARTS LIST
(REFER TO DIAGRAM ON PAGE ) MODEL 0 ACTUATOR PARTS LIST REF # DESCRIPTION ATTACHMENT ASSEMBLY INNER SLIDE OUTER CASE BODY ONLY WELD-ON 608000 5900 60600 BODY CONLY WELD-ON 404600 608700 60600-5/6" BALL COUPLER WELD-ON 607500 608400 60600-5/6" BALL COUPLER /" BOLT-ON 66400 608400 477700-5/6" BALL COUPLER, ZINC PLATE /" BOLT-ON 477600 608400 477700-5/6" DROP COUPLER WELD-ON 76500 47800 60600-5/6" DROP COUPLER 5/8" BOLT-ON 77700 47800 685500-5/6" DROP COUPLER, ZINC PLATE 5/8" BOLT-ON 47800 47800 47800-5/6" ADJUSTABLE COUPLER WELD-ON 890900 608700 60600-5/6" ADJUSTABLE COUPLER 5/8" BOLT-ON 4800 608700 685500 " ADJUSTABLE LUNETTE TYE WELD-ON 8900 608700 60600 /4" ADJUSTABLE CLEVIS HITCH WELD-ON 607900 608700 60600 " ADJUSTABLE LUNETTE EYE 5/8" BOLT-ON 48500 608700 685500 " LUNETTE EYE WELD-ON 607700 608600 60600 MTG. CHANNEL w/weld-on L-EYE /" BOLT-ON 664500 608600 477700 REF. NO. PART NO. PART DESCRIPTION QTY. See Above Outer Case and Inner Slide Assy. 00900 Bearing (Top and Bottom) 6 4700 Bearing (Side) 8 4 60900 Front Roller 5 088800 Front Roller Bolt 6 0799700 Cotter Pine /8 X /4 7 60800 Front Roller Cover 8 0776800 Breakaway Chain 4 ft. 9 055500 S-Hook 0 05400 Breakaway Lever Assembly 05500 Weather Seal 05600 Breakaway Lock - Left 05700 Breakaway Lock - Right 4 079800 Lockwasher 5/6 Std. 8 5 0794900 Bolt - Hex 5/6 NC X 5/8 4 6 507000 Cylinder Cover 7 0794800 Bolt - Hex 5/6 NC X / 4 5500 Star Lockwasher /8 (Included in 746 Assy.) 8 899500 Plastic Cylinder Plug (Included in 746 Assy.) 9 74400 Master Cylinder -/4" Bore Drum Brake 9 474700 Master Cylinder Disc Brake 0 Push Rod Assmebly (Included in 744) 5000 Filler Cap (Included in 744) - -5/8-8 NEF 0774500 Gasket 09900 Connector, /64 Orifiece Drum Brake 475000, Connectors Disc Brake 475000 4 088800 Cylinder Bracket Assembly 5 088900 Cylinder Bracket Assembly 6 08700 Bolt - Hex /8 NC X " 7 0797600 Nut - Hex /8 NC 8 08000 Push Rod Block 9 4600 Damper 0 08900 Rear Roller 59500 Master Pin 08500 Cotter Pin 86900 Nylon Washer 9/ X -/8 59400 Damper Pin 40 079700 Lockwasher /" Zinc 4 0798500 Hex Nut /- 4 0449-0 Zerk 5/64 46 477700 Outer Case Primer w/-/" Offset, Zinc Plate available 47 685500 Outer Case Primer w/" Offset, Zinc Plate available 48800 Master Cylinder Repair Kit Disc Brake