APX0A/APX0E APX0A/APX0E Rim Clamp Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies * APX 0 Shown Parts Identification READ these instructions before placing unit in service KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference by supervisors and operators. 0 J. P. Hennessy Drive, LaVergne, TN USA 0- /- 00/- www.ammcoats.com Manual Part No.: 000 0 HENNESSY INDUSTRIES INC. Manufacturer of AMMCO, COATS and BADA Automotive Service Equipment and Tools. Revision: 0/0
Parts Identification The following pages include parts breakdowns with exploded view illustrations to help with ordering replacement or spare kits. Assemblies are noted where it is recommended that individual parts not be ordered separately. Every effort is made to supply accurate exploded views, however, due to interim changes in manufacturing operations, some units may not be exactly as illustrated. COATS Rim Clamp Tire Changer
Lift Assembly (If equipped)............ Chassis Assembly................... Foot Pedal Assembly (Air)............ Foot Pedal Assembly (Elec.)........... Table Top Assembly.................. Shaft Housing Assembly............. BL Arm Assembly..................0 Horizontal/Vertical Slide Assembly.... Pressure & Inflation Bracket Assemblies.................... - Tilt Tower Assembly........... - Tilt Tower Assembly........... - Robo Arm Assembly................ RoboRoller Arm Assembly (If equipped).............. Cylinder Assemblies.............0 - Valve Assemblies............... - Schematic Diagram............. - TABLE OF CONTENTS COATS Rim Clamp Tire Changer
LIFT ASSEMBLY (If equipped) 0 0 0 LIFT - ASSEM, W/C 00 /- x / HEX WASHER SCREW SHAFT - LIFT CHANNEL-CYL.MOUNT SPACER - LIFT 0 PIN - COTTER 0 WASHER - FLAT,STD, / S.A.E. 000 CYLINDER ASSEMBLY 0 / x / CLEVIS PIN 0 0 BOLT - SELF TAPPING BRACKET, LIFT MOUNT 00 NUT - /- UNC PEDAL - ARM, LIFT /-0 X. BHCS PEDAL - FOOT, LIFT /WC NUT-HEX,.0-0, NYLCK 0 BAR - PEDAL, LIFT 00 SCREW - /- X / WHC 00 SH BOLT / X / X / - 0 *** VALVE - LFT 0 RETAINING RING WASHER. ID x / OD SHAFT- TILT & LIFT CYL. /-0 x 0.00 WHCS 0000 SPACER - BLOCK, VALVE 0 000 GUARD - PEDAL 00 SCREW - HEX WASHER HEAD *** See Valves Assemblies pgs. - COATS Rim Clamp Tire Changer
CHASSIS ASSEMBLY 0 0 00 /- x / HEX WASHER SCREW 000 SCREW - /- x -/ BHCS 00 SCREW - HEX WASHER HEAD 0000 COVER - FRONT B.L. PAD-CNTR, B/L HEX HEAD BOLT ** CYLINDER ASSEMBLY 0 /- UNC x / 00 SCREW - SET, /- x 0 0 NUT- /-0 UNC LOCK. 00000 SPRING - MED. HIGH PRESS 00 NUT- / - UNC PLATE - GUIDE, TILT TOWER 000 HOSE - CUSHION 0.0 x. 0000 BRACKET - MOUNTING, MAINFOLD 0000 FILTER/LUBRICATOR ASSEM. 0000 KIT-MANIFOLD WITH FITTINGS COVER - SIDE COVER - PEDALS, SID 0 WASHER-0. ID x -/ OD 0 WASHER-0.0 ID x 0. x.0 ** See Cylinder Assemblies pgs. 0 - COATS Rim Clamp Tire Changer
FOOT PEDAL ASSEMBLY (Air) 0 Torque to - ft/lb 0 BAR-SPCR, VLVE SHAFT-RTTN, PDL 0 COTTER-HAIRPIN SLEEVE-SPRNG, SWTCH BEARING-FLNGD,NYLN,/ SPACER-PEDAL (K) 0 CLIP-PIN,HTCH SPACER-PEDAL (K) CLEVIS PIN / X -/ LG*K) 0 PEDAL 0 WASHER-PLN,.IDX.ODX.0 0 EXT. SPRING, PEDAL NUT-HEX,.0-0,NYLCK 0 WASHER-PLN,/ WAVE WASHER / I.D. LEVER-FLLWR,CAM SCREW-SHCS,0-X/,GR,DRYLK CAM-BLCK,MNTNG BRACKET-VLVE,SWTCH 0 00 SCREW-HWHST,/-0X/ *** VALVE-/WAY,ASSY *** VALVE-/WAY,ASSY *** VALVE-/WAY,ASSY 0000 Y-FITTING ASSEM *** See Valves Assemblies pgs. - COATS Rim Clamp Tire Changer
FOOT PEDAL ASSEMBLY (Elec.) 0 Torque to - ft/lb 0 0 BAR-SPCR,VLVE SHAFT-RTTN,PDL 0 COTTER-HAIRPIN SLEEVE-SPRNG,SWTCH BEARING-FLNGD,NYLN,/ 0 SPRING-TRSN 0 / X SELF TAP SPACER-PEDAL (K) SPACER-PEDAL (K) 0 CLEVIS PIN / X -/ LG*K) 0 CLIP-PIN,HTCH PEDAL 0 WASHER-PLN,.IDX.ODX.0 0 EXT. SPRING, PEDAL NUT-HEX,.0-0,NYLCK 0 WASHER-PLN,/ WAVE WASHER / I.D. LEVER-FLLWR,CAM SCREW-SHCS,0-X/,GR,DRYLK 0 SCREW-SHCSS,0-X/,GR,DRYL NUT-HEX,LK,RVRSBLE,#0- BRACKET-EXTNSN,SWTCH,ELCTRC 0 BRACKET-GDE,SPRNG,TRSN SCREW-HHCS,GR,.0-0X.000 LEVER-SWTCH,ASSY BRACKET-VLVE,SWTCH SCREW-0- X., BHSSCS 00 SCREW-HWHST,/-0X/ SCREW-HHCS,mm X. X mm 0 00 INTERNAL WASHER LEVER-ACTVTR,SWTCH SWITCH-ASSY CIRCUIT BREAKER - AMP 0000 Y-FITTING ASSEM CAM-BLCK,MNTNG *** VALVE-/WAY,ASSY *** VALVE-/WAY,ASSY *** See Valves Assemblies pgs. - COATS Rim Clamp Tire Changer
0000 FITTING-UNION TEE,MM 0000 TUBE-MM x ROTATING UNION PLATE-PIVOT 0000 HOLDER-HOSE,T.T BOLT-LINK,TABLE LINK-PIVOT 0 EXTERNAL RETAINING 0 WASHER x.x. 0 SHAFT-MNTNG,CYLNDR CYLINDER ASSY. DIA 0 RING-RETAINING,EXT 0000 ELBOW -0 / NPT x MM MALE CONNECTOR CAP PLUG -/ DIA E SCREW-HHCS,MMx0MM WASHER-SPECIAL SLIDE STOPPER SCREW-SHCS,0- x/,gr,drylk 0 EX POSTION x - CLAMP 0 PLUNGER,SPRING,&HOUSING CARRIER/COVER-CLAMP CARRIER/COVER-CLAMP FITTING MALE ELBOW TABLE TOP ASSEMBLY Torque to 0-0 ft/lb Torque to - ft/lb 0 0 0 SCREW,/- UNC x / PLATE-T/T,0 HUB-TABLE TOP BOLT-SOC. HD. CAP SCREW 0000 EXTERNAL RETAINING RING APPLY GREASE TO THESE LOCATIONS Torque to 0- ft/lb COATS Rim Clamp Tire Changer
SHAFT HOUSING ASSEMBLY 000 MOTOR - HP 0 AIR MOTOR 0 / - NUT TINNERMAN BRACKET-MOTOR 00 NUT - WHIZ LOCK 0 / x.00 SERRATED 0 PULLEY - MOTOR 00 NUT-HEX,/-, LK,WHZ 0 0 SCREW-HHCS,/-x-/ HOUSING SHAFT ASSEMBLY 000 SCREW-HHCS,/-x,GR 00 WASHER-PLN,/ TRANSMISSION-ASSY,00 000 V BELT-L00 0 Torque to 0- ft/lb Max COATS Rim Clamp Tire Changer
BL ARM ASSEMBLY 0 *** CYLINDER-B/L,,ASSY CLEVIS PIN / X -/ G CLIP-CLVS 0 RETAINER-WASHER,.00 PIN-PVT,ROD,CYLNDR,B/L 0 NUT-HEX,/-0/E,NYLCK 00 ARM-B/L BLOCK-PVT,SHOE,B/L 0 NUT-HEX,LCK,NYLCK,/-,GR 0 LOOSENER-BD,ASSY 0 SCREW-HHCS,/-X,GR *** VALVE-ARM,B/T,ASSY 0000 GRIP-HND,RBBR,/ SCREW-/-0X/ WHC 0 PIN-DTNT 00 SCREW-HHCS,/-0X-/,GR SCREW-HWHST,/-0X/ ** See Cylinder Assemblies pgs. 0 - *** See Valves Assemblies pgs. - APPLY GREASE TO THESE LOCATIONS 0 COATS Rim Clamp Tire Changer
HORIZONTAL SLIDE ASSEMBLY 0 0 0 0 *** CYLINDER-ASSY SHAFT - HORIZ.SLIDE 00 /- x / SOC 0 BUSING-VALUE, / SHAFT-/ DIA ROLLER 0 RING -RETAINING EXT. 00-0 BEARING - 0 x x ROLLER - / x 0 NUT-HEX,LCK,/-,WASHER HEAD 0 0 CLAMP HOSE RETAINER GB-GDE,LNG 0 NUT-HEX,/-,NYLK,ZNC 00 SCREW-SHSSCP,/-x/ SCREW-SHLDR BUSHING-FLNGD SLIDE-HRZNTL,WLDMNT WASHER-SPRMG,WVE CAM-LCK,W/HNDLE,ASSY 000 NUT-HEX,LCK,/- 0 000 SCREW-/-X-/ 00 SCREW-HHCS,/-x *** VALVE-POS 0 BRACKET-MNTNG,VLVE/LBE SCREW-HWHST,F,.0-0x.00,B/O 00 SCREW-HWHST,/-0x/ 0 BOTTLE-LUBE 000 APPLICATOR-LUBE 0000 SHOULDER BOLT COMPRESSION SPRING 0 00 SHOULDER BOLT 000 BRACKET-STOP,LEVER SLIDE 000 BRACKET-STOP LEVER` APPLY GREASE TO THESE LOCATIONS ** See Cylinder Assemblies pgs. 0 - *** See Valves Assemblies pgs. - COATS Rim Clamp Tire Changer
PRESSURE & INFLATION BRACKET ASSEMBLIES 0 Torque to 0 ft/lb 0 ASSEMBLY-PRESSURE 0 0 COATS Rim Clamp Tire Changer
BRACKET-INFLTN ASSEMBLY 00 NUT - JAM, /- 0 NUT - JAM, /- 0 WASHER - LK, EXTERNAL,/ 0 WASHER - LK. EXTERNAL, / /-0 UNC WHIZ LOCKNUT BRACKET-INFLATION 0 BUSHING-VALUE,/ 0000 FITTING-ELL,D,/NPT 0 VALVE-PPT,/,/-NPT 0 FITTING-ELL,/NPT,/HSE 0 BUSHING-VALUE,/ FITTING-ELL,/NPTX/HOSE 000 VALVE-/,PRTD 00 SCREW-HHCS,/-0x-/,GR ASSEMBLY-PRESSURE 00 SCREW-HWHST,/-0x/ COVER-SDE,TWR,AXLRY 0 NUT-HEX,/-0/E,NYLCK WASHER-FLAT,/ SAE 0 000 TRIM-STRIP,ARM STOP,APX 0 SCREW-HHCS,/-0/x-/ GRS VALVE- RLF,00PSI,/NPT 0 MANIFOLD-PRTCTR,GGE 0 GAUGE-AIR CAP-TWR/RSRVR SUPPORT-TWR,AXLRY,ASSY 0 NUT-HEX,.-,LK,WHZ PLATE-SLDE,VRTCL 0 SCREW-HHCS,/-x-/,WHZ LK 0 PASTE-MNTNG,UNVRSL TOOL-LIFT HOLDER-TL/LBE,WLDMNT PEDAL-W/BAR,ASSY CHANNEL-PDL,INFLTN 0 SCREEN-STRNR 0 FITTING-STRGHT,/ 000 BLOCK-STOP, VERT SLIDE 000 FITTING - STRGHT - / PRESSURE ASSEMBLY 0 FITTING-TEE,/NPTM,W/VBRSL 0 VALVE-INFLTN,PNMTC 0 CHAMBER-VLME,CI 0 FITTING-NPPLE,/NPTM,W/VBRSL 0 REPEATER-PRSSRE 0 FITTING-NPPLE,/NPTM 0 REGULATOR-PRST 0 FITTING-STRGHT,/NPTMX/TB 0 HOSE-/X 0 0 TUBE-NYLN,/ODX. 0 CLAMP-HOSE,/ID 0 FITTING-0EL,/NPTMX/HOSE FITTING-TEE,/NPTMX/X/TBE COATS Rim Clamp Tire Changer
COATS Rim Clamp Tire Changer 0 0 0 0 0 0 0 0 0 0 0 0 0 0 TILT TOWER ASSEMBLY
TILT TOWER HANDLE.TILL TOWER 0 RING-RETAINING, EXT BUSHING -VALVE,TWR,TLT 000 BEARING-NYLINER / 0000 HOUSING VERT. SLIDE VALVE ASSEM. _ SPRING-COMPRESSION VALVE-MINIATURE 00000 CAM-VALVE,VERT.SLIDE 0 00000 COVER-VALVE,VERT.LEFT 00 SCREW-HEX WASHER HEAD WASHER M0 NYLON / 0/ x / LONG 000 SCREW.SHCS 0-x ST.MALE FTG,/ NPT x / 0000 VALVE -CNTRL,FLW RETAINING RING 0000 GRIP-FOAM,HANDLE 0 00 RING-RTNNG,EXTRNL,.0 ROLL PIN / x / LG. 0 SCREW-SHCS,/-x-/,GR SPRING COMPRESSION LOCK PLATE VERT.SLIDE / - JAM NUT TUBE-LIFT CYL. 0 WASHER-FLAT,STD./ S.A.E 0 PIN-COTTER 0 PIN,CLEVIS SEAL-PISTION,LIFT CYL. SHAFT-VERTICAL SLIDE SHAFT-LIFT CYL. 0 CAP-VERT.SLIDE SCREW-BUTTON HD. SOC. 00 SCREW-/-x / HHC 000 MOLDING-STOP HOOD SCRE-SET /-x / 0 CAP-SLIDE LOCK CYL (K) 0 SEAL-SLIDE LOCK CYL (K) 0000 FITTING-TEE,/PTCX/PT BASE-SLIDE LOCK CYL. (K) 0 SCREW-HHCS,.0-0x.00 000 SPRING-PRSSRE,MDM/HGH SCREW-/- x / 0 SCREW-SBHCS 0 HORIZ.SLIDE ASSY. 0 BASE LIFT CYL. TUBE LOCK LIFT CYL.TUBE 0 0 STOPER,RUBBER STOP MOUNT DUCKHEAD 00 SCREW-/-x/ SHSS 000 SCREW, /-x-/ HEX HD CAP NUT-HEX,/-0.WHZ LK 0000 MOUNT/DEMOUNT HEAD 0 /-0 / HHCS 0000 MAGNET-ROBO FINGER ROBO FINGER 0 SPACER-ROLLER ROLLER 0 WASHER-PLAIN 00 SCREW-/-x.00 HHCS O-RING, SEAL 0 SET SCREW, 0/x/, CONE PT NUT, 0/ LOCK 0 SCREW, SOC HD CAP 0 WAVE SPRING WASHER 0 FITTING 0 ELE APPLY GREASE TO THESE LOCATIONS COATS Rim Clamp Tire Changer
TILT TOWER ASSEMBLY 0 0 0 COATS Rim Clamp Tire Changer
TILT TOWER ASSEMBLY 00 SCREW-HWHST,/-0x/ WASHER-FLAT / 0000 COVER-TILT TOWER,RUBBER 0 PIN,CLEVIS / x -/ K 0 NUT- /-0 UNC LOCK. / DOWEL PIN x. SCREW - SET. /-x / 0 NUT-HEX,LCK,/-,WASHER 0 SCREW-HHCS,/ - x -/ 0 BLOCK-ROLLER,HORIZ.SLIDE ROLLER-HORZ.SLIDE SHAFT 0 TILE TOWE HOUSING M/C 0 SCREW-SHCS,/-x-/,GR 0 WASHER-FLAT STD. / S.A.E SPRING - COMPRESSION BASE-SLIDE LOCK CYL. (K) SEAL-SLIDE LOCK CYL (K) 0 CAP-SLIDE LOCK CYL (K) LOCK PL ATE-HORIZ.SLIDE 0 / JAM NUT 0 PIN-COTTER PIN,CLEVIS SCREW-SET,/- x / FITTING 0 /-0 x.0 HHCS 0000 RING-RTNNG,PSH-ON,/ 0000 TUBE-FORMED,PROTECTOR 0000 CLAMP-CRIMP.HOSE,. MM I.D 0000 HOSE - /.0 x 0 BLACK 0 0000 SCREW-0/ x HHCS 0000 SHUTTLE VALUE 0000 VALVE,FLOW CONTROL PIVOT PIN TILT TOWER HEX HEAD BOLT. 0000 PLUG-PLASTIC 00 NUT-/-; WASHER HD. 00 SCREW-SHSSCP,/- 0 COTTER PIN, / x WASHER, 0. IDx-/ OD APPLY GREASE TO THESE LOCATIONS COATS Rim Clamp Tire Changer
ROBO ARM ASSEMBLY Torque to 0 ft/lb 0 0 0 Torque to 0 ft/lb FOOT-HLD DWN,HLPR ARM,ST-0 0 PIN-RL 00 BALL-STL,.00,PIEZO 0000 GRIP-HND,RBBR,/ RING-RETAINING,EXT,00-00, BHSCS 0- X / LG. *K) *** VALVE-POS CYLINDER-SPEC, BOREX ST ST. MALE FTG, / NPT X / 0 00 SCREW-HWHST,/-0X/ 0 CLAMP SCREW-SHSSCP,/-0 X / FITTING-GRSE,/- 0 NUT-HEX,/-0/E,NYLCK 00 WASHER-FLT,/ 0 ARM-FRNT,WLDMNT 0 ARM-RR,WLDMNT 0 PIN-PVT,ARM,SWNG 0 SCREW-HHCS,/-0X0-/ 0 00 SCREW-HHCS,/-X/,WHZ LK WASHER-FLAT,/ SAE NUT-HEX,LK,.-,INSRT 000 TRIM-STRP,STP,ARM 0 SCREW-HSWH,.-X.000,ZNC SCREW-HHCS,/-0X-/,GR 00 GAUGE-AIR,MNT,FLNGE 0 FASTENER-PLSTC 0 MANIFOLD-VLVE,BLD,ASSY 0- WAVE WASHER 0 0- SNAP RING 00 NUT- / - UNC FITTING 0 ELL /NPT X / APPLY GREASE TO THESE LOCATIONS *** See Valves Assemblies pgs. - COATS Rim Clamp Tire Changer
ROBOROLLER ARM ASSEMBLY (If equipped) 0 0 ROLLER,SMALL,AUX ARM HOUSING/BRACKET W/C 0 /- x / SET SCREW 0000 GRIP-HANDLE SHAFT - AUX ROLLER ROLLER,LARGE,AUX ARM 00 RING - RETAINING / SCREW - 0- x., BHSCS *** VALVE-POS 0 ST. MALE FTG, / NPT X / FITTING CYLINDER-SPECIAL 00 SCREW-HEX WASHER HEAS 0 CLAMP - NEOPRENE CUSHION FITTING - GREASE / - 0 PIN-PVT.ARM,SWNG 0 BUMPER-/ID WELDMENT - AUX,ARM SOCKET HD. SET SCREW 0 RING -RETAINING 00 BALL / 00 /- x / SOC SCREW, /-x-/ HEX HD CAP STOP-BLOCK AUX ARM APPLY GREASE TO THESE LOCATIONS *** See Valves Assemblies pgs. - COATS Rim Clamp Tire Changer
CYLINDER ASSEMBLIES Torque to 0 ft/lb Torque to - ft/lb Torque to - ft/lb * * 0 0 Torque to 0 ft/lb 0 Torque to 0 ft/lb Torque to 0- ft/lb TILT TOWER & LIFT CYL. ASSEMBLY HOR. SLIDE CYL. ASSEMBLY BL ARM CYLINDER ASSEMBLY *Note: Not the same one found * Note: Not the same one found on 000 Series Rim Clamp 0 COATS Rim Clamp Tire Changer
Torque to - ft/lb 0 Torque to 0 ft/lb TILT TOWER CYLINDER ASSEMBLY - 0 SHAFT-CLYNDR,LFT BOLT-TIE,CYLNDR SEAL-O RING,.0X.00X. FITTING-/NPTMX/HOSE W/ORFICE 0 CAP-TOP,CYLNDR 000 FITTING-0EL,/NPT SEAL-O RING SEAL-ROD,CYLNDR BEARING-SLVE,NYLNR 0 PISTON-W/WSHR,ASSY NUT-HEX,LCK,JAM,/-,ZINC 0 SLEEVE-CYLNDR,. CAP-BASE,CYLNDR NUT-HEX,LK,.-,INSRT HOR. SLIDE CYLINDER ASSEMBLY - SHAFT-CYLNDR,AXLRY 0 BOLT-TIE,CLMPMG SEAL-O RING,.0X.00X. 000 FITTING-0ELBOW 0 FITTING-0EL,/NPTMX/HOSE 0 CAP-TOP,CYLNDR SEAL-O RING SEAL-ROD,CYLNDR BEARING-SLVE,NYLNR 0 PISTON-W/WSHR,ASSY NUT-HEX,LCK,JAM,/-,ZINC SLEEVE-CYLNDR,. CAP-CYLNDR,BTTM NUT-HEX,LK,.-,INSRT 0 / HOSE FITTING BL ARM CYLINDER ASSEMBLY - 000 FITTING-EL,0 0 CAP-BTTM,B/L 0 SEAL-O RING,. X.0 BARREL-CYLNDR, 0 NUT-HEX,/-0/E,NYLCK 0 WASHER-LOWER, B.L. CYL. PISTON-CYLNDR,B/L WASHER-UPPR,CYLNDR,B/L 0 SEAL-O RING 0 - SHAFT-B.L.CYL 0 RING-RETAINING,INT,000-0 WASHER-PLN,.00X.0 0 ROD SEAL (K) 0 CAP-TOP,B/L 0 WIPER SEAL BOLT-/- X 0. LONG GR. LIFT CYL. ASSEMBLY LIFT CYLINDER ASSEMBLY - 000 0 SHAFT-CLYNDR,LFT BOLT-TIE,CYLNDR SEAL-O RING,.0X.00X. 0 FITTING-/NPTMX/HOSE 0 CAP-TOP,CYLNDR SEAL-O RING SEAL-ROD,CYLNDR BEARING-SLVE,NYLNR PISTON-W/WSHR,ASSY 0 NUT-HEX,LCK,JAM,/-,ZINC 0 SLEEVE-CYLNDR,. CAP-BASE,CYLNDR NUT-HEX,LK,.-,INSRT 000 FITTING-0ELBOW 000 FITTING-0ELBOW APPLY GREASE TO THESE LOCATIONS COATS Rim Clamp Tire Changer
VALVE ASSEMBLIES 0 LIFT ASSEMBLY VALVE / HOSE FITTING, /NPT VALVE-OPRTD,PDL HOR. SLIDE ASSEMBLY VALVE 00 MUFFLER 0 FITTING-REDUCER /NPTx/NPT 000 STRAIGHT FITTING PEDAL ASSEMBLY VALVE(ELEC.) 000 FITTING-ELL,/NPT,/HSE ARM AUX FITTING-TEE,/NPT,STRT ASSEMBLY VALVE 000 FITTING-STRGHT,/NPT,BRSS VALVE-/WAY,W/PULL PIN 00 MUFFLER 000 FITTING-ELL,STRT,/NPT,0 0000 / CLOSE NIPPLE 0 AIR CHECK VALVE 0 ST. MALE FTG, / NPT X / 0 FITTING-RDCR,/NPT X /NPT BL ARM ASSY VALVE BL ARM ASSEMBLY VALVE VALVE-POS,W/HNDLE 00 MUFFLER 000 FITTING-ELL,/NPT,/HSE 000 FITTING-0ELBOW (SHORT) ROBO ARM ASSY VALVE ITEM ROBO ARM ASSEMBLY VALVE PART NO. DESCRIPTION 000 TING-STRGHT,/NPT,BRSS 0 SMALL MUFFLER VALVE-POS 0 FITTING-RDCR,/NPT X /NPT MALE ELBOW, / NPT X / (K)) COATS Rim Clamp Tire Changer
PEDAL ASSEMBLY VALVE(ELEC.) FITTING-MM VALVE-/WAY,W/PULL PIN 00 MUFFLER 000 FITTING-ELL,STRT,/NPT,0 0000 / CLOSE NIPPLE 0 AIR CHECK VALVE 0 FITTING-TEE,/NPTM,W/VBRSL PEDAL ASSEMBLY VALVE(AIR) 0 FITTING-/ HOSE 0A-B VALVE-/WAY,W/PULL PIN 00 MUFFLER FITTING-EL,0 HOR.SLIDE ASSEMBLY VALVE HOR. SLIDE ASSEMBLY VALVE 00 MUFFLER VALVE-POS 000 FITTING-STRGHT,/NPT,BRSS ARM AUX ASSY VALVE ARM AUX ASSEMBLY VALVE MALE ELBOW, / NPT X / (K) 0 FITTING-RDCR,/NPT X /NPT VALVE-POS 0 SMALL MUFFLER 000 FITTING-STRGHT,/NPT,BRSS COATS Rim Clamp Tire Changer
COATS Rim Clamp Tire Changer SCHEMATIC DIAGRAM
HOSE REELS LENGTH PART NO. DESCRIPTION 0-ft. 000 /"ID x /"OD BLK RUBBER HOSE 0-ft. 000 /"OD x 0. PLASTIC TUBE 0-ft. 000 /"ID x /"OD BLK RUBBER HOSE -ft. 000 0." ID x."od RED RUBBER HOSE 0-ft. 000 MM OD x MM WALL PLASTIC HOSE LENGTH PART NO. DESCRIPTION 0-ft. 0000 0 MM OD VINYL TUBE 0-ft. 000 MM OD x MM WALL PLASTIC TUBE 00-ft. 000 /" OD x /" ID VINYL TUBE 0-ft. 000 MM OD x MM WALL PLASTIC TUBE -ft. 000 /" ID x / OD BLK RUBBER HOSE COATS Rim Clamp Tire Changer
COATS Rim Clamp Tire Changer NOTES
NOTES COATS Rim Clamp Tire Changer
Rim Clamp Tire Changer All-Air Unit Compressed Air Requirements COATS Rim Clamp tire changers that are powered entirely by air (no electric motor) require a single compressed air power source. Refer to the table below for exact specifications. Tire Changer Model Compressor Size Capable of APX 0 HP - SCFM at 0 PSI APX 0 HP - SCFM at 0 PSI Oiler and Water Separator Maintenance The oiler and water separator (on units so equipped) require weekly service. Oil and water levels (indicated on the level gauge on the side of each bowl) should be checked regularly. Add oil to the oiler if the fluid level is more than /" from the top of the gauge. Remove the filler plug in the top of the oiler, and add SAE 0W non-detergent oil or an air tool oil to bring the level up to /" from the top of the gauge. Replace the filler plug and clean up any spilled oil. Note: An alternate adjustment method for the oil flow is to turn the knob fully clockwise to stop the flow, then turn it back couterclockwise / turn. Transmission Lubrication The transmission in this machine is a sealed unit packed with grease and should need no regular maintenance. Air Gauge Check and Recalibration. Inflate a standard " passenger car tire/wheel assembly to PSI. Use a high quality stick-type pressure gauge to verify the pressure. Attach the tire changer's inflation hose to the valve stem and check the pressure reading on the air gauge. If it does not read PSI, recalibrate the gauge.. Remove the screw-on lens. Loosen the screws on the face of the gauge. Loosen them just enough so that the gauge face moves. Do not remove the screws.. Rotate the gauge face until the PSI mark is aligned with the gauge needle. Tighten the screws and replace the lens. Danger, Warning, Caution, and Instructional Decals Always make the cleaning of these important decals a part of your regular maintenance routine. If they are damaged or illegible, replace them immediately. Your safety, and the safety of others is involved! 000 0 0/0 Copyright 00 Hennessy Industries and COATS All Rights Reserved Printed in USA