Machining Centre, CNC Mills and Lathes, Turret Mills, Drills, Saws & Miscellaneous Machining Centre End of Line Gate Eclipse VMC-610 Vertical Machining Centre 3 Axis Anilam 6000M control Year of Manufacture: 2007 Serial Number: 72323544 Equipment: Anilam 600M 3 axis CNC control, 16 tool ATC, BT40 spindle. Specifications: 610x355x510mm travels (X,Y,Z), 760x360mm table size, 8000rpm BT/CAT #40 spindle, 5.5hp spindle motor, 24M/min rapid traverses, 2120x1985x2480mm envelope, 2510Kg. Price: 25,500 + VAT Condition NEW (Price includes:- Delivery, Offloading, Positioning, Commissioning and Training, UK mainland only Excludes Scotland where additional delivery charges apply.) CNC Lathes Used - Excel CNC-200 (Mustang 400 CNC Lathe) Year of manufacture: 2001 Serial Number: 42390 Equipment: Fagor 8055TC control, 8 3,jaw chuck, Duplomatic 8 station Automatic Turret Specifications: 1000mm B.C, 400mm Swing over Bed, 210mm over Cross slide, 0-3000 rpm -2 steps, 10M/Min rapid traverses X,Z 0-7000mm/min feed rates. Price: 11,750 + VAT Sheffield
Used - Pinacho S94 C/260 CNC Lathe Year of manufacture: 1997 Serial Number: 31577 Equipment: Fagor 800TC control, 10 3,jaw chuck, 3 point steady, QCTP with toolholders Specifications: 2000mm B.C, 530mm Swing over Bed, 315mm over Cross slide, 770mm Swing in Gap, 0-1700 rpm -3 steps, 80mm Spindle Bore, 10HP. Price: 6,350 + VAT CNC Mills Used - Gate Sovereign 4BK CNC Knee Mill Year of Manufacture: 1989 Serial Number: 771357 Equipment: Heidenhain TNC 315 Control, Auto Lube, Light, Coolant, Air Spindle Brake, Anti-Vibration floor pads. Specifications: 3HP Variable speed motor, ISO 30 Spindle with Bristol Erikson quick change facility, 60-4200 rpm Spindle Speeds, 1067 x 330mm Table size, 780 x 356 x 127 mm Auto travels (X,Y,Z), Manual knee travel 406mm. Price: 1,950 + VAT Used - Semco CNC Turret Mill LC-185VS Year of Manufacture: TBC Serial Number: 85080759 Equipment: Acu-Rite MillPwr 2 Axis Control, Power Drawbar, Power Downfeed to Quill, Rapid Knee up and down, Auto Lube, Low volt light, Coolant & Splash Tray. Specifications: 50 x 10 Table, Variable Speeds 50 3750 rpm, R8 Taper. Price: 2,500 + VAT
End of Line Gate Eclipse ECM-Junior CNC Turret Mill Year of Manufacture: 2004 Serial Number: 0402001 Equipment: Acu-RiteMillPwr 2 Axis Control, Digital Readout to Quill, Drawbar, Interlocked Table Guard, Automatic Lubrication, Coolant, Splash tray. Specifications: 3 HP motor, Stepped pulley Speed change, 10 steps, 120-1500 rpm, R8 Spindle, 914 x 200mm Table, 540 x 241 x 356mm travels (X,Y,Z), Quill travel 127mm, Head tilts L/R +/- 45 deg. Price: 7,025 + VAT Condition NEW Turret Mills Not Actual Machine. Shown as example of machine condition and colours Refurbished Gate PBM 2000 Turret Mill Year of Manufacture: 2010 Serial Number: 20100307-S Equipment: 3 Axis Fagor 30i Digital Readout, Air power Drawbar, Auto Lube, Power feeds in X & Y Axes, Splash Tray, Coolant, halogen light, Vari-speed head, R8 spindle Specifications: 3 HP motor, Variable Speed head, 60-4200 rpm, R8 Spindle, 1067x230mm (42 x9 ) Table, 660x305x406mm travels (X,Y,Z), Quill travel 127mm, Head tilts L/R & F/B +/- 45 deg. Price: 4,995 + VAT Condition Refurbished Repaired after transit damage Bargain Surface Grinder Used Gate-Proth PSGS 3060-AH Automatic Horizontal Spindle Surface Grinding Machine Year of Manufacture: 2007 Serial Number: 0702F03 Equipment: Automatic Downfeed with spark out, 2 Axis Digital Readout, Work Light, Coolant, Wheel balancing stand and arbor, Electro magnetic chuck with auto demag. Specifications: 3 HP motor, 700x340mm Max long and cross travels, 600x300mm electro magnetic chuck with rectifier and Auto Demag, 355x25x127mm standard wheel size, Max distance from wheel base to chuck 237mm (with new wheel), 490mm Spindle Centre Height from table, 1650Kg. Price: 11,750 + VAT Excellent Condition (Ex-University)
Drilling Machines Ex-Demo Gate Progress 16V Bench Drills Year of Manufacture: 2000-2002 Serial Number: N/A Equipment: Specifications: 16mm cap, 2MT, ½ HP motor, Variable speeds 375-2080rpm, 300 x 300mm table (300mm dia. Table), 80mm dia. Column, 80Kg. Price: 250 + VAT Used Progress 43S Geared Head Pedestal Drill Year of Manufacture: 2005 Serial Number: N/A (2 Available) Equipment: Interlocked Chuck Guard, Rack and pinion with safety collars, All Geared Head, Adjustable depth stop. Specifications: 2HP motor, 32mm capacity, 3MT spindle, 150mm spindle travel, 75-3140 rpm 120mm column dia., 405 x 505mm table, 240 Kg. Price: 950 + VAT Ex-Demo Progress 43S Geared Head Pedestal Drill Year of Manufacture: 2006 Serial Number: 633768 Equipment: Interlocked Chuck Guard, Rack and pinion with safety collars, All Geared Head, Adjustable depth stop. Specifications: 2HP motor, 32mm capacity, 3MT spindle, 150mm spindle travel, 75-3140 rpm 120mm column dia., 405 x 505mm table, 240 Kg. Price: 1,275 + VAT
New Gate Progress 16V Bench Drills (Cancelled Export order Machines wrong colour for general sale RAL 6010) Year of Manufacture: 2010 Serial Numbers: TBA (6 available) Equipment: Specifications: 16mm cap, 2MT, ½ HP motor, Variable speeds 375-2080rpm, 300 x 300mm table (300mm dia. Table), 80mm dia. Column, 80Kg. Price: Was 875.00 Now 725.00 + VAT Centre Lathes End of Line Epple MD 170-750 Centre Lathe Year of Manufacture: 2008 Serial Number: 1124 Equipment: 3 & 4-Jaw chucks, Fixed and travelling steadies, Rear splash guard, 4-way toolpost, Interlocked chuck guard, Saddle Guard, Leadscrew covers, Light, Coolant. Specifications: 340mm swing over bed, 470mm swing in gap, 750mm between centres, CE mark. Price: 3,504 + VAT Condition NEW End of Line Epple MD 170-750 Digi Centre Lathe Year of Manufacture: 2009 Serial Number: 084 Equipment: 2 Axis Easson ES8 Digital readout, 3 & 4-Jaw chucks, Fixed and travelling steadies, Rear splash guard, 4-way toolpost, Interlocked chuck guard, Saddle Guard, Leadscrew covers, Light, Coolant. Specifications: 340mm swing over bed, 470mm swing in gap, 750mm between centres, CE mark. Price: 4,995 + VAT Condition NEW
End of Line Epple MD 180-1000 Centre Lathe Year of Manufacture: 2008 Serial Number: 0188 Equipment: 3 & 4-Jaw chucks, Fixed and travelling steadies, Rear splash guard, 4-way toolpost, Interlocked chuck guard, Saddle Guard, Leadscrew covers, Light, Coolant. Specifications: 360mm swing over bed, 560mm swing in gap, 1000mm between centres, CE mark. Price: 4,468 + VAT Condition NEW Sawing Machines Used Progress 1018NDR Bandsaw Year of Manufacture: 2000 Serial Number: 011140 Equipment: Swivel bow, Variable speeds, Hydraulic dampening, adjustable downfeed rates, Blade guides, Coolant. Specifications: Capacity 254mm Ø, 254x 254mm 90 Deg., 254m Ø, 254x254mm +/- 45 deg., 204mm Ø, 178x178mm +60 deg., 3352x27 x0.9mm Blade size, 1890x750x1150mm floor space, 410Kg Price: 1,000 + VAT Ex-Demo VBS 1610-E Vertical Bandsaw Year of Manufacture: 2006 Serial Number: THEE24 Equipment: Power Table Feed, Blade Welder, Grinder and Guillotine, Rip fence, Light. Specifications: 396mm (16 )Throat, 255mm (10 ) max thickness, 2 speed range 20-1000M/min, 550 x 600mm table size, 1000mm table height, 3140 x 16 x.9mm Blade size, 940x965x1840mm floor space, 435Kg Price: 2,775 + VAT
Miscellaneous Used Epple BSM-150 Belt Linisher Year of Manufacture: 2007 Serial Number: N/A Equipment: 3 phase motor, 150mm x 2000mm belt, Tool rest, Flat area for surface grinding, Powerful motor for fast metal removal. Specifications: 4 Kw, 3Phase motor, 37m/sec belt speed, 250x150mm contact wheel, 124Kg Price: 350 + VAT Terms and Conditions All Business will be conducted in accordance with Gate Machinery International Ltd.Terms and conditions of sale. Copies available on request. Prices: Payment: Delivery: Validity: Warranty: Ex- works or Sheffield Showrooms. Carriage and VAT Extra. 100% Prior to despatch Ex-Stock, subject to prior sale Subject to Prior sale End of Line machines offered with a 12 month warranty Ex-Demo machines offered with 3 months limited warranty. Used Machines sold, as seen.