1GRILLES & REGISTERS
GRILLES ND REGISTERS Contents Page No. GRILLES ND REGISTERS General Product Overview Louvered Face Grilles and Registers Models GDS, GDL - luminum - Double Deflection - Supply Models GSS, GSL - luminum - Single Deflection - Supply Models GDS, GDL - Steel - Double Deflection - Supply Models GSS, GSL - Steel - Single Deflection - Supply Models GRL, GRS, GZL, GZS - luminum - 3/4" (19) Spacing - Fixed Blades - Return Models GRL, GRS, GZL, GZS - Steel - 3/4" (19) Spacing - Fixed Blades - Return Curved Spiral Duct Grilles Models CGDS, CGDL - Steel - Double Deflection - Supply Models CGSS, CGSL - Steel - Single Deflection - Supply Model CGPR - Steel - Perforated Face - Supply and Return Model CGRL - Steel - 45 Deflection - Fixed Blades - Return Curved Blade Grilles and Registers Model CBG - luminum - One and Two-Way Discharge Pattern - Supply Model CBG - luminum - Three and Four-Way Discharge Pattern - Supply Model CBG - Steel - One and Two-Way Discharge Pattern - Supply Model CBG - Steel - Three and Four-Way Discharge Pattern - Supply Eggcrate Grilles and Registers Model RGE - luminum - Return and Exhaust Model RGE - Steel - Return and Exhaust Model RGEF - Steel - Return and Exhaust, Narrow Regressed T-Bar Perforated Grilles and Registers Model GPR - luminum - Return Model GPR - Steel - Return Filter Grilles Models FGB45, FGBZ, FGP, FGE - luminum - Exhaust and Return Models FGB45, FGBZ, FGP, FGE - Steel - Exhaust and Return Door/Transfer Grilles Model GDGD - Steel Model GDGD-FR - Fire Rated Heavy Duty Grilles and Registers Model Series LBG - luminum - Supply Options and ccessories Overview Fastenings Mounting Frames Panel Mounting/Ceiling Modules Options Custom Sizing Finishes ir Balancing Devices - Steel and luminum - Opposed Blade Dampers 3 8 9 10 11 19 21 29 30 35 36 40 41 42 43 50 52 52 58 58 64 64 77 78 81 95 96 97 98 99 99 99 100 2
GRILLES ND REGISTERS GENERL PRODUCT OVERVIEW Grilles and Registers Quality assured products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing of an industry leader these add up to true value; prime reasons for specifying MP Grilles and Registers. rchitectural excellence and engineering selections demand high quality products and shipping schedules demand service; all part of the package. Comprehensive range of models and styles to choose from. Versatile selection and sizing ensures the correct product for any specific application. Material choice of premium quality extruded aluminum or cost-effective steel. Unique in our manufacturing process is the exclusive use of corrosion-resistant coated steel as used in the auto industry. The material has superb forming qualities and outlasts painted cold-rolled steel and galvanized steel by up to three times. Various border/frame types and mounting options. Balancing accessories. Superior finishes. Performance data in accordance with current international test standards and the back-up of one of the finest 'in-house' testing laboratories in North merica. Louvered Face Grilles and Registers This series of grilles and registers are available in cost effective, corrosion-resistant steel or premium quality extruded aluminum construction. The blades are formed to a streamlined engineered contoured cross-section. Rigid, reinforced frames feature hairline-mitered corners. Optional opposed blade dampers have a screwdriver slot or lever operator for adjustment through the face of the register. s standard, the grilles and registers have countersunk screw holes in the frame, which make for an architecturally pleasing appearance. Louvered Face Supply ir GRILLES ND REGISTERS Models GDS, GDL Models GSL, GSS Double Deflection dual set of individually adjustable blades are friction pivoted and can be easily adjusted to provide maximum control of the air pattern for spread and deflection in two planes. Blades are spaced on 3/4" (19) centers. luminum Models GDS, GDL See page 8 Steel Models GDS, GDL See page 10 Single Deflection single set of individually adjustable blades are friction pivoted and can be easily adjusted to provide the desired spread or deflection in a single plane. Blades are spaced on 3/4" (19) centers. luminum Models GSS, GSL See page 9 Steel Models GSS, GSL See page 11 3
GRILLES ND REGISTERS Louvered Face Return ir Models GRL, GRL Model GZL GRILLES ND REGISTERS 45 Deflection, 3/4" (19) Blade Spacing The blades are fixed at a 45 angle. This grille is vision proof when installed in a low or high sidewall location with grille blade deflection facing away from the line of sight. In addition, a diverse selection of mounting frames are available to suit many suspended ceiling designs. luminum Models GRL, GRS See page 19 Steel Models GRL, GRS See page 21 0 Deflection, 3/4" (19) Blade Spacing The blades are fixed at 0. Their appearance compliments the supply grilles and registers of the same series. In addition, a diverse selection of mounting frames are available to suit many suspended ceiling designs. luminum Models GZL, GZS See page 19 Steel Models GZL, GZS See page 21 4
GRILLES ND REGISTERS Curved Spiral Duct Grilles MP s unique curved spiral duct grille design offers an architecturally superior appearance and saves installation time and money by directly mounting to the duct. This eliminates the need to fabricate stand-off saddles required for installing standard grilles. These grilles are available for both supply and return air applications. Double Deflection Models CGDS, CGDL See page 29 Single Deflection Models CGSS, CGSL See page 30 Perforated Model CGPR See page 35 45 Fixed Blade Model CGRL See page 36 Models CGDS, CGRL, CGSS Curved Blade Directional Grilles and Registers MP s curved blade directional grilles and registers are designed to meet the demand for top quality and competitive prices. Constructed with extruded aluminum blades, this model series is unobtrusive in appearance for architectural excellence. The grilles and registers may be used in sidewall and ceiling applications. Optional opposed blade dampers have a screwdriver slot operator for adjustment through the face of the register. The 1 1/4" (32) frames have countersunk screw holes for an inconspicuous appearance. Curved Blade without Deflection Vanes The models in this series have curved blades that provide a true directional pattern. There are twelve available patterns to choose from. luminum Model CBG One and Two-Way See page 40 Three and Four-Way See page 41 Steel Model CBG One and Two-Way See page 42 Three and Four-Way See page 43 GRILLES ND REGISTERS Models CBG, CBG 5
GRILLES ND REGISTERS Models RGE, RGE Model GPR GRILLES ND REGISTERS Eggcrate Return and Exhaust Grilles The eggcrate grilles and registers are constructed of thin, interlocked aluminum or stainless steel strips assembled in a square grid fashion that is available in a variety of grid sizes. The standard grid size is 1/2" x 1/2" x 1/2" with 1/2" x 1/2" x 1" or 1" x 1" x 1" as an option. Frame and border types are available in a variety of materials and mounting options. luminum Model RGE See page 50 Steel Frame Model RGE See page 52 Perforated Return Grilles The perforated face on these grilles and registers have 3/16" (5) diameter holes on 1/4" (6) staggered centers (51% free area) and is available in a choice of aluminum or steel construction. Their general appearance matches and compliments the popular perforated supply diffusers (refer to the PDSF Series in the diffuser section of the catalog). luminum Model GPR See page 58 Steel Model GPR See page 58 Models FGBZ, FGB45 Models GDGD, GDGD-FR 6 Filter Return and Exhaust Grilles MP offers a large selection of filter grilles that are designed to match and compliment their respective base models in appearance. The standard filter frame accepts a standard 1" (25) thick, throw away type filter (by others) with an option for a 2" (51) filter frame. Louvered Face See page 64 luminum Models FGB45, FGBZ Steel Models FGB45, FGBZ Eggcrate See page 64 luminum Model FGE Steel Model FGE Perforated See page 64 luminum Model FGP Steel Model FGP Door/ Transfer Grilles MP provides an assortment of door grilles that are designed to be completely sight proof and unobtrusive in appearance. They are constructed of steel. fire-rated version is also available. Steel Model GDGD Fire-Rated Model GDGD-FR See page 77 See page 78
GRILLES ND REGISTERS Linear Bar Grilles The MP LBG Series provides an extruded aluminum bar grille that offers beautiful styling and efficient performance. Linear bar grilles offer a choice of fixed air patterns with 0, 15 or 30 air deflection, a choice of bar widths and spacing and a selection of border/frame styles. They are available with an optional opposed blade damper for volume control. Linear bar grilles are recommended for supply air applications in floors, window sills, and high sidewall locations. They are not generally suited to ceiling mounted supply applications (other than for directional spot heating or cooling as an air curtain) as they are not designed for horizontal projection from the face. Models LBG-240, LBG-241, See page 81 LBG-243, LBG-280, LBG-281, LBG-480, LBG-481 Model LBG-240 Model LBG-280 Model LBG-480 Options and ccessories MP offers an extensive selection of accessories and options for grilles and registers. ir balancing devices and a variety of mounting frames are several of the accessories available. Grille options consist of special finishes, gaskets, alternative frames and a variety of other items. Options Fastening See page 96 Mounting Frames See page 97 Panel Mounting Frames See page 98 Options See page 99 Custom Sizing See page 99 Finishes See page 99 ccessories ir Balancing Devices See page 100 GRILLES ND REGISTERS Frames and ir Balancing Devices 7