MOUNTED AND SEMI-MOUNTED STUBBLE HARROW BY GRÉGOIRE-BESSON FOR TRACTORS FROM 80 TO 280 HP
Mounted and semi-mounted The new generation stubble harrow 200 years of know-how and experience acquired by Grgoire-Besson in design and manufacturing of tillage equipments allowed its engineers to create a full line of new stubble harrows suitable to all conditions. Polyvalent Stubble cultivation Deep tillage Tilling ploughed land Seed bed preparation with or without ploughing Versatile Choice for tines spacing : 230 mm 306 mm (mounted) Choice for rear accessories: triple row tine harrow rollers (various profile) Choice for levelling device : levelling discs levelling row tine 2
Efficient High clearance: under frame : 700 or 800 mm (mounted) and 700 mm (semi-mounted) between beams : 800 mm Designed to work in heavy residues conditions Mixing, straw distribution, levelling Resistance Working depth : 25 cm and more Field operation with machine folded (series 2230/ 2306/ 3600) All pivot points assembled with bushings and grease fittings. 3
RANGE mounted series 1230 I 1306 2230 2306 The new generation of stubble harrow A mounted stubble harrow range designed to fit all your requirements. CROSSLAND WHEELS 2230 / 2306 STANDARD EQUIPMENT WITH ROW TINE HARROW 10.0/75R1.3 (11,5/80R15.3 steel cord in option) Frame choice, 2 types of frames available CROSSLAND 1000 : fixed frame 3,00m, 13 tines 3,40m, 10 tines 3,45m, 15 tines (transport > 3,50m) Simplicity and robustness CROSSLAND 2000 : foldable frame Flat fold 3 sections Transport width : 3,00 m Possible field operation with machine folded No overhanging tine in transport 4
Accessories combination choice, 2 combinations available Depth wheels + triple row tine harrow Depth wheel, large diameter (10.0/75R15.3) : better behavior on difficult ground Triple row tine harrow: Ground to root separation, allowing the die drying of these last on the surface. Rear roller + levelling device Large equipment choice Adapt the roller to your conditions, see the rear equipment page 12-13. 5
RANGE Mounted series 1230 I 1306 The new generation of stubble harrow Technical specifications CROSSLAND 1230 Fixed frame 13 3,00 m 3,00 m 1350 kg 110 Hp 230 mm 15 3,45 m 3,50 m 1500 kg 120 Hp CROSSLAND 1306 Fixed frame 10 306 mm 3,10 m 3,00 m 1200 kg 110 Hp Weights and HP requirements only indicative, subject to variations following options and type of soil. 6
RANGE Mounted series 2230 2306 The new generation of stubble harrow CROSSLAND 2230 2306 Technical specifications CROSSLAND 2230 Mounted flat fold 3 sections frame 19 4,40 m 2200 kg 150 Hp 21 230 mm 4,85 m 3,00 m 2350 kg 170 Hp 23 5,30 m 2550 kg 185 Hp CROSSLAND 2306 Mounted flat fold 3 sections frame 16 4,90 m 2100 kg 170 Hp 306 mm 3,00 m 18 5,50 m 2200 kg 185 Hp Weights and HP requirements only indicative, subject to variations following options and type of soil. 7
RANGE Semi-mounted series 3600 I 4000 4600 The new generation of stubble harrow A semi-mounted stubble harrow range for mid sized and high sized tractors Working width from 4,40 m to 8,05 m CROSSLAND 4000 CROSSLAND 4600 Regularity and simplicity Automatic self-levelling with integrated weight transfer Walk over tandem (wheels set per pair on a boggy) Working depth adjustment : on the go from the cab using fixed stopper (single point adjustment) A : maxi 45 cm B : maxi 25 cm 8
Sharp Wheels in the middle, track taken out by a tine. Regular tillage on all width at any depth. Allows to work without rear attachment. Push back the operational limits. Excel control depth. Homogeneous work over all the width. Manoeuvrable Transport width : 3,00 m (foldable ranges) Depth wheels in the middle. Depth wheels designed to allow sharp turns. Long tongue allowing the passage of two wheels together. 9
RANGE Semi-mounted series 3600 I 4000 4600 The new generation of stubble harrow CROSSLAND 3600 Flat fold 3 sections Transport width : 3,00 m Possible field operation with machine folded No overhanging tine in transport The use of all the power in 3,00m broad for extreme conditions allows. CROSSLAND 4000 4600 Serie 4000 : Vertical 90 fold Serie 4600 : Vertical 100 fold 3 sections frame. 3 sections frame. Transport width 3,00 m. Transport width 3,00 m. 10
CHOICE OF TYRES CROSSLAND 3600/4000/4600 340/65R18 11.5/80R15.3 Gauge wheels (Front) : model 3600 : in option model 4000 : not available model 4600 : standard TECHNICAL SPECIFICATIONS CROSSLAND 3600 Flat fold 3 sections 23 5,30 m 6040 kg 185 Hp 230 mm 3,00 m 25 5,75 m 6190 kg 200 Hp CROSSLAND 4000 Vertical 90 fold 3 sections frame 19 4,40 m 5300 kg 150 Hp 21 230 mm 4,85 m 3,00 m 5400 kg 170 Hp 23 5,30 m 6050 kg 185 Hp CROSSLAND 4600 Vertical 100 fold 3 sections frame 27 6,20 m 7000 kg 215 Hp 31 230 mm 7,15 m 3,00 m 7650 kg 250 Hp 35 8,05 m 8000 kg 280 Hp Weights and HP requirements only indicative, subject to variations following options and type of soil. 11
Levelling and finishing accessories The new generation of stubble harrow The new generation stubble harrow CROSSLAND offers a large choice of accessories of levelling and finishing to adapt to all the conditions of use. Levelling device adjustment The levelling device is regulated compared to the roller by cranks. What is pledge of : Simplicity Swiftness Accuracy Robustness Levelling row tine The levelling row tine make it possible to break the mounds, to level the ground and to refine the surface layer some oneself the soil type. Levelling discs The levelling discs make it possible to level the ground in important presence of vegetable residues on the surface. Levelling discs Levelling row tine assembly The assembly in quincunx is designed to improve the mulch flow. 12
Impack roller Piled wheel roller Ø 540mm. Wheel thread: 172 mm (Wheels indexing compared to the tines). Agronomic interests : Even consolidation Aggressive lozenge profile. Work in wet conditions 1 2 1 Active scrapers Avoid ground accumulation Levelling Choice for finishing. 2 Rear scrapers in option 2 Rear scrapers (option) Crumbler roller Crumbler roller Ø 500 mm Agronomic interests : Aggressiveness on the vegetable residues. Preserve moisture in the ground. Double crumbler roller Front roller Ø 400 mm. Rear roller Ø 300 mm. Agronomic interests : Very aggressiveness on the vegetable residues. Excellent finishing. Roller assembled on pivot for an excellent follow-up of the ground. Triple row tine harrow Ø 16 mm 3 row tines lines in wire of Ø 16 mm retractable in reverse gear. Agronomic interests : Very aggressiveness on the vegetable residues. separates the soil from the roots(couch grass). pressure on the ground and aggressivity are adjustable. 13
Eurochisel The new generation of Eurochisel tine Standard Eurochisel tine Cast steel leg «EdgeOn» profile Strong leg fixing on its mounting bracket. Narrow leg for less traction requirement. Optimized trash flow. Well maintained wear parts. Support moulded for more resistance. Underframe clearance 700 mm Spring reset safety device, trip pressure 450 kg Raising height under point : 34 cm NEW GENERATION TINE For the new range CROSSLAND, Gregoire- Besson developed the second generation of the Eurochisel tine. New All the struture parts are moulded. Individual adjustment height of the tine (Patent GB) BOLTED RANGE Protection of the lower nut (Patent GB) & TH reversible point Hexagon-head screw : ensure an easy disassembling in spite of wear Ideal in hard and compacted ground Spoiler SW 254 mm Assembly with TH reversible point. Stay Wide profil : cutting width guaranteed during the life of the part. Shallow working & B DC1 Point The sure value : Economic Versatile (Deep & shallow work) Mixing optimization Without slot (No mechanical clearance) Available with wear-plat. Goose share Scalpe over all the width 2 widths according to tine spacing (254 or 305 mm) Stay Wide profil : cutting width guaranteed during the life of the part & Deep working QUICK CHANGE RANGE QCEC1 point QCEC3 carbide point Assembly and disassembling rapids. 45 profile = good penetration + low pulling. Ideal for hard or compacted ground Goose share QC Stay Wide profil : cutting width guaranteed during the life of the part. Deflector QC Mixing optimization 14
Genuine Gregoire-Besson wearing parts The simpliest way to achieve high output TINE SPACING 230 MM Crumbling on top Cracking in deep Holes and empty spaces elimination Homogeneous mulch creation Full width working even in shallow tillage conditions : Goose share : 7 cm Staigth point : 12 cm TINE SPACING 306 MM Fall tillage in extreme conditions Deep tillage Good flow in heavy trash conditions (corn) Straight point : 12 cm 5 25 cm 150 mm 230 mm 80 mm ERGONOMIC All the nuts are blocked in rotation. (1 only wrench necessary). A PROFILE OF TINE STUDIED Large and flat, great surface of contact for a good fixing on the support. Narrow and thick, improves rigidity against the shocks. Thin to ease the residue flow Large and flat: Great surface of contact for a good work-holding of wears. 15
A l preuve du temps GRÉGOIRE-BESSON 49230 Montfaucon-Montign - France Tl. (+33) 2 41 64 72 67 Fax (+33) 2 41 64 67 73 contactfr@gregoirebesson.fr GREGOIRE-BESSON UK LIMITED Spalding Road Bourne Lincs. PE10 0AU - England Tel : 01778 423787 Fax. : 01778 394431 enquiries@gregoire-besson.co.uk GRÉGOIRE-BESSON CANADA INC 4480, Rue Martineau St Hyacinthe (P. Qubec) J2R 1V1 - Canada Tel (1) 450 799 56 15 info@gregoirebesson.ca GREGOIRE-BESSON GmbH Am Rabewerk 1 D - 49152 Bad Essen - Germany Tel (+49) 5472-771 0 / (+49) 5472-771 190 E-mail : info@rabe-agri.eu ГРЕГУАР-БЕССОН ВОСТОК Россия 308006 г. Белгород, ул. Корочанская, 132а Тел/факс: +7 (4722) 402-210 Тел: +7(4722) 58 70 35 ТОВ «ГРЕГУАР-БЕССОН УКРАЇНА» 18028, Україна, Черкаська обл., м. Черкаси, вул. Рози Люксембург, буд. 202. UKRAINE тел. : +38 (0472) 71-28-23 факс: +38 (0472) 71-28-23 gregoirebesson.ua@yandex.ua GREGOIRE-BESSON POLSKA Sp.zo.o. Kowanówko ul. Obornicka 1a 64-600 Oborniki - Polska Tel/fax : 067 261 97 79 gbesson@poczta.onet.pl GB.LE.TI.CROSSLAND_16p.1501.EN- Photographies non contractuelles. Les poids, et caractristiques ne sont donns qu à titre indicatif et sont non contractuels. GB MKG q GREGOIRE-BESSON BEIJING OFFICE www.gregoire-besson.com CROSSLAND